Exemplo n.º 1
0
void
Tile::traverse( osg::NodeVisitor& nv )
{    
    // set the parent tile in the technique:
    if ( !_parentTileSet && _terrain.valid() )
    {
        osg::ref_ptr<Tile> parentTile;
        //Take a reference
        osg::ref_ptr< TerrainNode > terrain = _terrain.get();
        if (terrain.valid())
        {
            terrain->getTile( _key.createParentKey().getTileId(), parentTile );
            CustomTerrainTechnique* tech = dynamic_cast<CustomTerrainTechnique*>( _tech.get() );
            if ( tech )
                tech->setParentTile( parentTile.get() );
            _parentTileSet = true;
        }
    }

    // this block runs the first time the tile is traversed while in the scene graph.
    if ( !_hasBeenTraversed )
    {
        if ( nv.getVisitorType() == osg::NodeVisitor::UPDATE_VISITOR )
        {
            Threading::ScopedWriteLock lock( this->_tileLayersMutex );
            {
                if ( !_hasBeenTraversed && _terrain.valid() )
                {
                    _hasBeenTraversed = true;

                    // we constructed this tile with an update traversal count of 1 so it would get
                    // here and we could register the tile. Now we can decrement it back to normal.
                    // this MUST be called from the UPDATE traversal.
                    ADJUST_UPDATE_TRAV_COUNT( this, -1 );
                }
            }
        }
    }

    // code copied from osgTerrain::TerrainTile... TODO: evaluate this... -gw
    if ( nv.getVisitorType()==osg::NodeVisitor::CULL_VISITOR )
    {
        osg::ClusterCullingCallback* ccc = dynamic_cast<osg::ClusterCullingCallback*>(getCullCallback());
        if (ccc)
        {
            if (ccc->cull(&nv,0,static_cast<osg::State *>(0))) return;
        }
    }

    if ( _dirty )
    {
        init();
    }

    if ( _tech.valid() )
    {
        _tech->traverse( nv );
    }
}
Exemplo n.º 2
0
void
Tile::applyImmediateTileUpdate( TileUpdate::Action action, int value )
{
    CustomTerrainTechnique* tech = dynamic_cast<CustomTerrainTechnique*>( _tech.get() );
    if ( tech )
    {
        tech->compile( TileUpdate(action, value), 0L );
        tech->applyTileUpdates();
    }
    else
    {
        queueTileUpdate( action, value );
    }
}
Exemplo n.º 3
0
void
OSGTerrainEngineNode::onMapInfoEstablished( const MapInfo& mapInfo )
{
    LoadingPolicy::Mode mode = *_terrainOptions.loadingPolicy()->mode();
    OE_INFO << LC << "Loading policy mode = " <<
        ( mode == LoadingPolicy::MODE_PREEMPTIVE ? "PREEMPTIVE" :
          mode == LoadingPolicy::MODE_SEQUENTIAL ? "SEQUENTIAL" :
          mode == LoadingPolicy::MODE_PARALLEL   ? "PARALLEL" :
          "SERIAL/STANDARD" )
        << std::endl;

    // create a factory for creating actual tile data
    _tileFactory = new OSGTileFactory( _uid, *_cull_mapf, _terrainOptions );

    // go through and build the root nodesets.
    if ( !_isStreaming )
    {
        _terrain = new Terrain(
            *_update_mapf, *_cull_mapf, _tileFactory.get(), *_terrainOptions.quickReleaseGLObjects() );
    }
    else
    {
        _terrain = new StreamingTerrain(
            *_update_mapf, *_cull_mapf, _tileFactory.get(), *_terrainOptions.quickReleaseGLObjects() );
    }

    this->addChild( _terrain );

    // set the initial properties from the options structure:
    _terrain->setVerticalScale( _terrainOptions.verticalScale().value() );
    _terrain->setSampleRatio  ( _terrainOptions.heightFieldSampleRatio().value() );

    if (_terrainOptions.enableBlending().value())
    {
        _terrain->getOrCreateStateSet()->setMode(GL_BLEND , osg::StateAttribute::ON);    
    }

    OE_INFO << LC << "Sample ratio = " << _terrainOptions.heightFieldSampleRatio().value() << std::endl;

    // install the proper layer composition technique:

    if ( _texCompositor->getTechnique() == TerrainOptions::COMPOSITING_MULTIPASS )
    {
        _terrain->setTechniquePrototype( new MultiPassTerrainTechnique( _texCompositor.get() ) );
        OE_INFO << LC << "Compositing technique = MULTIPASS" << std::endl;
    }

    else 
    {
        CustomTerrainTechnique* tech = new SinglePassTerrainTechnique( _texCompositor.get() );

        // prepare the interpolation technique for generating triangles:
        if ( mapInfo.getElevationInterpolation() == INTERP_TRIANGULATE )
            tech->setOptimizeTriangleOrientation( false );

        _terrain->setTechniquePrototype( tech );
    }

    // install the shader program, if applicable:
    installShaders();

    // calculate a good thread pool size for non-streaming parallel processing
    if ( !_isStreaming )
    {
        unsigned num = 2 * OpenThreads::GetNumberOfProcessors();
        if ( _terrainOptions.loadingPolicy().isSet() )
        {
            if ( _terrainOptions.loadingPolicy()->numLoadingThreads().isSet() )
            {
                num = *_terrainOptions.loadingPolicy()->numLoadingThreads();
            }
            else if ( _terrainOptions.loadingPolicy()->numLoadingThreadsPerCore().isSet() )
            {
                num = (unsigned)(*_terrainOptions.loadingPolicy()->numLoadingThreadsPerCore() * OpenThreads::GetNumberOfProcessors());
            }
        }
        _tileService = new TaskService( "TileBuilder", num );

        // initialize the tile builder
        _tileBuilder = new TileBuilder( getMap(), _terrainOptions, _tileService.get() );


        // initialize a key node factory.
        switch( mode )
        {
        case LoadingPolicy::MODE_SERIAL:
            _keyNodeFactory = new SerialKeyNodeFactory( _tileBuilder.get(), _terrainOptions, mapInfo, _terrain, _uid );
            break;

        case LoadingPolicy::MODE_PARALLEL:
            _keyNodeFactory = new ParallelKeyNodeFactory( _tileBuilder.get(), _terrainOptions, mapInfo, _terrain, _uid );
            break;

        default:
            break;
        }
    }

    // Build the first level of the terrain.
    // Collect the tile keys comprising the root tiles of the terrain.
    std::vector< TileKey > keys;
    _update_mapf->getProfile()->getRootKeys( keys );

    for( unsigned i=0; i<keys.size(); ++i )
    {
        osg::Node* node;
        if ( _keyNodeFactory.valid() )
            node = _keyNodeFactory->createNode( keys[i] );
        else
            node = _tileFactory->createSubTiles( *_update_mapf, _terrain, keys[i], true );

        if ( node )
            _terrain->addChild( node );
        else
            OE_WARN << LC << "Couldn't make tile for root key: " << keys[i].str() << std::endl;
    }

    // we just added the root tiles, so mark the bound in need of recomputation.
    dirtyBound();
}
Exemplo n.º 4
0
// called from the UPDATE TRAVERSAL, because this method can potentially alter
// the scene graph.
bool
StreamingTile::serviceCompletedRequests( const MapFrame& mapf, bool tileTableLocked )
{
    //Don't do anything until we have been added to the scene graph
    if (!_hasBeenTraversed) return false;

    bool tileModified = false;

    if ( !_requestsInstalled )
        return false;

    // First service the tile generator:
    if ( _tileGenRequest.valid() && _tileGenRequest->isCompleted() )
    {
        CustomTerrainTechnique* tech = dynamic_cast<CustomTerrainTechnique*>( getTerrainTechnique() );
        if ( tech )
        {
            //TODO: consider waiting to apply if there are still more tile updates in the queue.
            if ( _tileUpdates.size() == 0 )
            {
                tileModified = tech->applyTileUpdates();
            }
        }
        _tileGenRequest = 0L;
    }


    // now deal with imagery.
    const LoadingPolicy& lp = getStreamingTerrain()->getLoadingPolicy();

    StreamingTerrainNode* terrain = getStreamingTerrain();

    //Check each layer independently.
    for( ImageLayerVector::const_iterator i = mapf.imageLayers().begin(); i != mapf.imageLayers().end(); ++i )
    {
        ImageLayer* imageLayer = i->get();

        bool checkForFinalImagery = false;

        CustomColorLayer colorLayer;
        if ( getCustomColorLayer( imageLayer->getUID(), colorLayer ) )
        {
            if ( lp.mode() == LoadingPolicy::MODE_PREEMPTIVE )
            {
                // in preemptive mode, always check for the final imagery - there are no intermediate
                // placeholders.
                checkForFinalImagery = true;
            }
            else if (lp.mode() == LoadingPolicy::MODE_SEQUENTIAL && 
                     readyForNewImagery(imageLayer, colorLayer.getLevelOfDetail()) )
            {
                // in sequential mode, we have to incrementally increase imagery resolution by
                // creating placeholders based of parent tiles, one LOD at a time.
                if ( colorLayer.getLevelOfDetail() + 1 < (int)_key.getLevelOfDetail() )
                {
                    // if the parent's image LOD is higher than ours, replace ours with the parent's
                    // since it is a higher-resolution placeholder:
                    if ( _family[Relative::PARENT].getImageLOD(colorLayer.getUID()) > colorLayer.getLevelOfDetail() )
                    {
                        osg::ref_ptr<Tile> parentTile;
                        getStreamingTerrain()->getTile( _family[Relative::PARENT].tileID, parentTile, !tileTableLocked );

                        // Set the color layer to the parent color layer as a placeholder.
                        CustomColorLayer parentColorLayer;
                        if ( parentTile->getCustomColorLayer( colorLayer.getUID(), parentColorLayer ) )
                        {
                            this->setCustomColorLayer( parentColorLayer );
                        }

                        // ... and queue up an update request.
                        queueTileUpdate( TileUpdate::UPDATE_IMAGE_LAYER, colorLayer.getUID() );
                    }
                }
                else
                {
                    // we've gone as far as we can with placeholders; time to check for the
                    // final imagery tile.
                    checkForFinalImagery = true;
                }
            }
        }

        if ( checkForFinalImagery )
        {
            // Then the image requests:
            for( TaskRequestList::iterator itr = _requests.begin(); itr != _requests.end(); )
            {
                bool increment = true;
                TileColorLayerRequest* r = static_cast<TileColorLayerRequest*>( itr->get() );
                //We only care about the current layer we are checking
                if ( r->_layerUID == imageLayer->getUID() )
                {
                    if ( itr->get()->isCompleted() )
                    {
                        if ( r->wasCanceled() )
                        {
                            //Reset the cancelled task to IDLE and give it a new progress callback.
                            r->setState( TaskRequest::STATE_IDLE );
                            r->setProgressCallback( new StampedProgressCallback(
                                r, terrain->getImageryTaskService( r->_layerUID )));
                            r->reset();
                        }
                        else // success..
                        {
                            //See if we even care about the request
                            if ( !mapf.getImageLayerByUID( r->_layerUID ) )
                            {
                                //The maplayer was probably deleted
                                OE_DEBUG << "Layer uid=" << r->_layerUID << " no longer exists, ignoring TileColorLayerRequest " << std::endl;
                                itr = _requests.erase(itr);
                                increment = false;
                            }
                            else
                            {
                                CustomColorLayerRef* result = static_cast<CustomColorLayerRef*>( r->getResult() );
                                if ( result )
                                {
                                    this->setCustomColorLayer( result->_layer );

                                    queueTileUpdate( TileUpdate::UPDATE_IMAGE_LAYER, r->_layerUID );

                                    //OE_NOTICE << "Complete IR (" << _key.str() << ") layer=" << r->_layerId << std::endl;

                                    // remove from the list (don't reference "r" after this!)
                                    itr = _requests.erase( itr );
                                    increment = false;
                                }
                                else
                                {  
                                    if (r->_numTries > r->_maxTries)
                                    {
                                        CustomColorLayer oldLayer;
                                        if ( this->getCustomColorLayer( r->_layerUID, oldLayer ) )
                                        {
                                            // apply the old color layer but with a new LOD.
                                            this->setCustomColorLayer( CustomColorLayer(
                                                oldLayer.getMapLayer(),
                                                oldLayer.getImage(),
                                                oldLayer.getLocator(),
                                                _key.getLevelOfDetail(),
                                                _key ));

                                            itr = _requests.erase( itr );
                                            increment = false;
                                            OE_DEBUG << "Tried (" << _key.str() << ") (layer uid=" << r->_layerUID << "), too many times, moving on...." << std::endl;
                                        }
                                    }
                                    else
                                    {
                                        OE_DEBUG << "IReq error (" << _key.str() << ") (layer uid=" << r->_layerUID << "), retrying" << std::endl;

                                        //The color layer request failed, probably due to a server error. Reset it.
                                        r->setState( TaskRequest::STATE_IDLE );
                                        r->reset();
                                    }
                                }
                            }
                        }
                    }
                }

                if ( increment )
                    ++itr;
            }
        }
    }

    // Finally, the elevation requests:
    if ( _hasElevation && !_elevationLayerUpToDate && _elevRequest.valid() && _elevPlaceholderRequest.valid() )
    {
        // First, check is the Main elevation request is done. If so, we will now have the final HF data
        // and can shut down the elevation requests for this tile.
        if ( _elevRequest->isCompleted() )
        {
            if ( _elevRequest->wasCanceled() )
            {
                // If the request was canceled, reset it to IDLE and reset the callback. On the next
                _elevRequest->setState( TaskRequest::STATE_IDLE );
                _elevRequest->setProgressCallback( new ProgressCallback() );            
                _elevRequest->reset();
            }
            else // success:
            {
                // if the elevation request succeeded, install the new elevation layer!
                TileElevationLayerRequest* r = static_cast<TileElevationLayerRequest*>( _elevRequest.get() );
                osg::ref_ptr<osgTerrain::HeightFieldLayer> newHFLayer = static_cast<osgTerrain::HeightFieldLayer*>( r->getResult() );
                if ( newHFLayer.valid() && newHFLayer->getHeightField() != NULL )
                {
                    newHFLayer->getHeightField()->setSkirtHeight( 
                        terrain->getTileFactory()->getTerrainOptions().heightFieldSkirtRatio().get() *
                        this->getBound().radius() );

                    // need to write-lock the layer data since we'll be changing it:
                    {
                        Threading::ScopedWriteLock lock( _tileLayersMutex );
                        this->setElevationLayer( newHFLayer.get() );
                        this->dirtyBound();
                    }

                    // the tile needs rebuilding. This will kick off a TileGenRequest.
                    queueTileUpdate( TileUpdate::UPDATE_ELEVATION );

                    // finalize the LOD marker for this tile, so other tiles can see where we are.
                    _elevationLOD = _key.getLevelOfDetail();

    #ifdef PREEMPTIVE_DEBUG
                    OE_NOTICE << "Tile (" << _key.str() << ") final HF, LOD (" << _elevationLOD << ")" << std::endl;
    #endif
                    // this was the final elev request, so mark elevation as DONE.
                    _elevationLayerUpToDate = true;

                    // GW- just reset these and leave them alone and let cancelRequests() take care of cleanup later.
                    // done with our Elevation requests!
                    //_elevRequest = 0L;
                    //_elevPlaceholderRequest = 0L;
                }
                else
                {
                    //We've tried to get the tile's elevation but couldn't.  Just mark the elevation layer as up to date and move on.
                    _elevationLOD = _key.getLevelOfDetail();
                    _elevationLayerUpToDate = true;

                    //This code will retry indefinitely.  We need to have a way to limit the number of retries since
                    //it will block neighbor tiles from loading.
                    //_elevRequest->setState( TaskRequest::STATE_IDLE );
                    //_elevRequest->reset();
                }
            }
        }

        else if ( _elevPlaceholderRequest->isCompleted() )
        {
            TileElevationPlaceholderLayerRequest* r = 
                static_cast<TileElevationPlaceholderLayerRequest*>(_elevPlaceholderRequest.get());

            if ( r->wasCanceled() )
            {
                r->setState( TaskRequest::STATE_IDLE );
                r->setProgressCallback( new ProgressCallback() );
                r->reset();
            }
            else // success:
            {
                osg::ref_ptr<osgTerrain::HeightFieldLayer> newPhLayer = static_cast<osgTerrain::HeightFieldLayer*>( r->getResult() );
                if ( newPhLayer.valid() && newPhLayer->getHeightField() != NULL )
                {
                    // install the new elevation layer.
                    {
                        Threading::ScopedWriteLock lock( _tileLayersMutex );
                        this->setElevationLayer( newPhLayer.get() );
                        this->dirtyBound();
                    }

                    // tile needs to be recompiled.
                    queueTileUpdate( TileUpdate::UPDATE_ELEVATION );

                    // update the elevation LOD for this tile, now that the new HF data is installed. This will
                    // allow other tiles to see where this tile's HF data is.
                    _elevationLOD = r->_nextLOD;

    #ifdef PREEMPTIVE_DEBUG
                    OE_NOTICE << "..tile (" << _key.str() << ") is now at (" << _elevationLOD << ")" << std::endl;
    #endif
                }
                _elevPlaceholderRequest->setState( TaskRequest::STATE_IDLE );
                _elevPlaceholderRequest->reset();
            }
        }
    }

    // if we have a new TileGenRequest, queue it up now.
    if ( _tileUpdates.size() > 0 && !_tileGenRequest.valid() ) // _tileGenNeeded && !_tileGenRequest.valid())
    {
        _tileGenRequest = new TileGenRequest( this, _tileUpdates.front() );
        _tileUpdates.pop();
        //OE_NOTICE << "tile (" << _key.str() << ") queuing new tile gen" << std::endl;
        getStreamingTerrain()->getTileGenerationTaskService()->add( _tileGenRequest.get() );
    }

    return tileModified;
}