//-------------------------------------------------------------------------
// Purpose :
//
// Special Notes :
//
// Creator : Jason Kraftcheck
//
// Creation Date : 05/26/04
//-------------------------------------------------------------------------
void PartitionBody::get_all_children( DLIList<PartitionEntity*>& list )
{
DLIList<PartitionEntity*> tmp;
for (SubEntitySet* ptr = childList; ptr; ptr = ptr->bodyNext )
{
tmp.clean_out();
ptr->get_sub_entities( tmp );
list += tmp;
tmp.clean_out();
ptr->get_lower_order( tmp );
list += tmp;
}
}
//-------------------------------------------------------------------------
// Purpose : Get named attributes
//
// Special Notes :
//
// Creator : Jason Kraftcheck
//
// Creation Date : 03/03/03
//-------------------------------------------------------------------------
void CompositeGeom::get_attributes( const char* name,
DLIList<CubitSimpleAttrib>& list )
{
if (entityList.size() == 1)
{
// handle 8.1 attribs on single-entity 'composites'
list.clean_out();
entityList[0].entity->get_simple_attribute(COMPOSITE_DATA_ATTRIB_NAME,list);
while (list.size())
{
CubitSimpleAttrib attrib = list.pop();
if (attrib.int_data_list()[0] == 1)
{
entityList[0].entity->remove_simple_attribute_virt(attrib);
std::vector<CubitString> s(attrib.string_data_list().begin()+1, attrib.string_data_list().end());
std::vector<int> i(attrib.int_data_list().begin()+1, attrib.int_data_list().end());
CubitSimpleAttrib new_attrib(&s, &attrib.double_data_list(), &i);
entityList[0].entity->append_simple_attribute_virt(new_attrib);
}
}
entityList[0].entity->get_simple_attribute(name, list);
}
for (CompositeAttrib* ptr = listHead; ptr; ptr = ptr->next)
if (ptr->name() == name)
list.append(ptr->csa());
}
void CAMergePartner::merge_prepare(DLIList<RefEntity*> &merge_list)
{
DLIList<CubitAttrib*> my_ca_list;
CAMergePartner *my_camp_ptr;
RefEntity* re_ptr;
// get all the merge partner attributes that are on my owner
attribOwnerEntity->find_cubit_attrib_type(CA_MERGE_PARTNER, my_ca_list);
merge_list.clean_out();
DLIList<ToolDataUser*> td_list, temp_td_list;
int i;
for (i = my_ca_list.size(); i > 0; i--)
{
my_camp_ptr = CAST_TO(my_ca_list.get(),CAMergePartner);
my_ca_list.step();
td_list.clean_out();
// get all the objects with this unique id (which is also the merge id)
TDUniqueId::find_td_unique_id(my_camp_ptr->merge_id(), temp_td_list);
td_list += temp_td_list;
}
// now put those entities into the merge_list
for (i = td_list.size(); i > 0; i--)
{
re_ptr = CAST_TO(td_list.get(), RefEntity);
if (re_ptr)
{
CubitAttrib *tmp_attrib = re_ptr->get_cubit_attrib( CA_MERGE_PARTNER, CUBIT_FALSE );
if( tmp_attrib )
merge_list.append(re_ptr);
}
td_list.step();
}
// Now get bridge sense for each entity in list.
// Add this entity to list, too.
merge_list.append( attribOwnerEntity );
for( i = merge_list.size(); i--; )
{
RefEntity* ent = merge_list.get_and_step();
TopologyEntity* te = dynamic_cast<TopologyEntity*>(ent);
if( te->bridge_manager()->number_of_bridges() != 1 )
continue;
my_ca_list.clean_out();
ent->find_cubit_attrib_type(CA_MERGE_PARTNER, my_ca_list);
assert( my_ca_list.size() < 2);
if( !my_ca_list.size() )
continue;
my_camp_ptr = dynamic_cast<CAMergePartner*>(my_ca_list.get());
if( my_camp_ptr->bridge_sense() == CUBIT_UNKNOWN )
continue;
}
merge_list.pop(); // take attribOwnerEntity back off list
return;
}
void DagDrawingTool::get_relatives( ModelEntity* source_ptr,
DLIList<ModelEntity*>& result_set, int direction )
{
result_set.clean_out();
if( direction == DDT_UP_DAG )
source_ptr->get_parents( &result_set );
else if( direction == DDT_DOWN_DAG )
source_ptr->get_children( &result_set );
else assert( (direction == DDT_UP_DAG) || (direction == DDT_DOWN_DAG) );
}
void DagDrawingTool::get_relatives( DLIList<ModelEntity*>& source_set,
DLIList<ModelEntity*>& result_set, int direction )
{
DLIList<ModelEntity*> temp_set;
result_set.clean_out();
for( int i = 0; i < source_set.size(); i++ )
{
get_relatives( source_set.get_and_step(), temp_set, direction );
result_set.merge_unique( temp_set );
}
}
int TDUniqueId::find_td_unique_id(const int temp_id,
DLIList<ToolDataUser*> &td_list,
const RefEntity *related_entity)
{
td_list.clean_out();
int unique_id = temp_id;
//if we are not doing an undo and importing and merging within a file...
if( !GSaveOpen::performingUndo &&
GeometryQueryTool::importingSolidModel &&
!GeometryQueryTool::mergeGloballyOnImport)
{
//see if the old id maps to a new id...if so, use the new id
UIDMap old_uid_to_new_uid_map = CAUniqueId::get_old_to_new_uid_map();
UIDMap::iterator iter;
iter = old_uid_to_new_uid_map.find( unique_id );
if( iter != old_uid_to_new_uid_map.end() )
unique_id = (*iter).second;
}
std::pair<TDUIDList::iterator, TDUIDList::iterator>
bounds_pair = unique_id_list().equal_range(unique_id);
TDUIDList::iterator
it = bounds_pair.first, upper = bounds_pair.second;
if(it == unique_id_list().end())
return 0;
if ((*it).first == unique_id ) {
// the lower bound key is equal to unique_id, so this id is in the list
// look for duplicate id's, return one that's directly related
// get all td's with that id
for (; it != upper; it++)
{
bool related = true;
ToolDataUser *temp_tdu = (*it).second->owner_entity();
if (NULL != related_entity) {
TopologyEntity *topo_ent = CAST_TO(temp_tdu, TopologyEntity);
RefEntity* temp_entity = const_cast<RefEntity*>(related_entity);
if (!topo_ent ||
!topo_ent->is_directly_related(CAST_TO(temp_entity, TopologyEntity)))
related = false;
}
if (related) td_list.append(temp_tdu);
}
}
return td_list.size();
}
//=============================================================================
//Function: get_vertices (PUBLIC)
//Description: get the list of ChollaPoints on this surface
//Author: sjowen
//Date: 09/11/09
//=============================================================================
void ChollaSurface::get_vertices( DLIList<ChollaPoint *> &chpt_list )
{
chpt_list.clean_out();
ChollaCurve *chcurv_ptr;
for (int ii=0; ii<curveList.size(); ii++)
{
chcurv_ptr = curveList.get_and_step();
DLIList<ChollaPoint *> chc_pts = chcurv_ptr->get_points();
chpt_list += chc_pts;
}
chpt_list.uniquify_unordered();
}
void PointGridSearch::get_neighborhood_points_sorted(
DLIList<CubitPoint*> &point_list,
const CubitVector& center, double cut_off)
{
point_list.clean_out();
DLIList<CubitPoint*> temp_point_list;
int i;
for (int k = boundingCellMinimumZ; k <= boundingCellMaximumZ; k++)
{
int kn = numberGridCellsY * k;
for (int j = boundingCellMinimumY; j <= boundingCellMaximumY; j++)
{
int jn = numberGridCellsX * (kn + j);
for ( i = boundingCellMinimumX; i <= boundingCellMaximumX; i++)
{
int in = jn + i;
if (neighborhoodList[in])
{
temp_point_list += *(neighborhoodList[in]);
}
}
}
}
// evaluate point distance to center ... remove those larger than cut_off
SDLByDouble sorted_index_list;
IndexedDouble *ID;
CubitVector vec;
cut_off *= cut_off;
temp_point_list.reset();
for ( i = 0; i < temp_point_list.size(); i++)
{
vec = center - temp_point_list.get_and_step()->coordinates();
double distance = vec.length_squared();
if (distance < cut_off)
{
ID = new IndexedDouble( i, distance );
sorted_index_list.append( ID );
}
}
sorted_index_list.sort();
temp_point_list.reset();
for ( i = 0; i < sorted_index_list.size(); i++ )
{
ID = sorted_index_list.get_and_step();
point_list.append( temp_point_list.next( ID->index() ) );
delete ID;
}
}
CubitStatus PartitionShell::mass_properties( CubitVector& centroid,
double& volume )
{
PartitionCoSurf* cosurf = 0;
DLIList<CubitFacetData*> facets;
CubitVector p1, p2, p3, normal;
const CubitVector p0(0.0, 0.0, 0.0);
centroid.set(0.0, 0.0, 0.0 );
volume = 0.0;
while ((cosurf = next_co_surface( cosurf )))
{
if (is_nonmanifold( cosurf->get_surface() ))
continue;
facets.clean_out();
cosurf->get_surface()->get_facet_data( facets );
for (int i = facets.size(); i--; )
{
CubitFacet* facet = facets.step_and_get();
p1 = facet->point(0)->coordinates();
p2 = facet->point(1)->coordinates();
p3 = facet->point(2)->coordinates();
normal = (p3 - p1) * (p2 - p1);
double two_area = normal.length();
if (two_area > CUBIT_RESABS )
{
if (cosurf->sense() == CUBIT_REVERSED)
normal = -normal;
normal /= two_area;
double height = normal % (p0 - p1);
double vol = two_area * height;
volume += vol;
centroid += vol * (p0 + p1 + p2 + p3);
}
}
}
if (volume > CUBIT_RESABS)
centroid /= 4.0 * volume;
volume /= 6.0;
return CUBIT_SUCCESS;
}
void PointGridSearch::get_neighborhood_facets( DLIList<CubitFacet*> &facet_list )
{
// retrieve points over the current bounding box range
facet_list.clean_out();
DLIList<CubitPoint*> point_list;
get_neighborhood_points( point_list );
// retrieve all faces attached to the points in point_list
for (int i = 0; i < point_list.size(); i++)
{
CubitPoint* point = point_list.get_and_step();
DLIList<CubitFacet*> temp_facet_list;
point->facets(temp_facet_list);
for (int j = 0; j < temp_facet_list.size(); j++)
{
CubitFacet* facet = temp_facet_list.get_and_step();
if (!facet->marked())
{
facet->marked(CUBIT_TRUE);
facet_list.append(facet);
}
}
}
// unmark the found faces and return face_list
for (int m = 0; m < facet_list.size(); m++)
{
facet_list.get_and_step()->marked(CUBIT_FALSE);
}
}
void PointGridSearch::get_neighborhood_points( DLIList<CubitPoint*> &point_list )
{
// retrieve points over the current bounding box range
point_list.clean_out();
for (int k = boundingCellMinimumZ; k <= boundingCellMaximumZ; k++)
{
int kn = numberGridCellsY * k;
for (int j = boundingCellMinimumY; j <= boundingCellMaximumY; j++)
{
int jn = numberGridCellsX * (kn + j);
for (int i = boundingCellMinimumX; i <= boundingCellMaximumX; i++)
{
int in = jn + i;
assert( in >= 0 && in < numberGridCells );
if (neighborhoodList[in])
{
point_list += *(neighborhoodList[in]);
}
}
}
}
}
CubitStatus make_Point()
{
GeometryQueryTool *gti = GeometryQueryTool::instance();
GeometryModifyTool *gmti = GeometryModifyTool::instance();
DLIList<Body*> bodies;
DLIList<RefEntity*> free_entities;
// Read in the geometry from files specified on the command line
const char *argv = "stitch.name_occ";
CubitStatus status = read_geometry(1, &argv, false);
if (status == CUBIT_FAILURE) exit(1);
//Read in 2 volumes.
gti->bodies(bodies);
DLIList<Body*> new_bodies;
DLIList<Body*> from_bodies;
BodySM* from_body = bodies.get()->get_body_sm_ptr();
from_bodies.append(bodies.get());
CubitVector v1(.5,1,3);
CubitVector v2(.5,2,2);
CubitVector v3(.5,1,1);
BodySM* midplane_bodysm = 0;
status = OCCModifyEngine::instance()->get_mid_plane(v1, v2, v3, from_body, midplane_bodysm);
if(midplane_bodysm)
{
Body *midplane_body;
midplane_body = gti->make_Body(midplane_bodysm);
double d = midplane_body->measure();
assert( d > 99.9999 && d < 100.00001);
}
v1.x(2);
v2.x(2);
v3.x(2);
midplane_bodysm = 0;
status = OCCModifyEngine::instance()->get_mid_plane(v1, v2, v3, from_body, midplane_bodysm);
if(midplane_bodysm)
{
Body *midplane_body;
midplane_body = gti->make_Body(midplane_bodysm);
double d = midplane_body->measure();
assert( d > 69.9999 && d < 70.00001);
}
DLIList<Body*> neighbor_list;
status = gmti->webcut_with_plane(from_bodies, v1, v2, v3, new_bodies, neighbor_list, ONLY_INVOLVED_BODIES);
double d = new_bodies.step_and_get()->measure();
CubitVector v = new_bodies.get()->center_point();
int n = new_bodies.get()->num_ref_faces();
assert(n==8);
assert(d <= 710 && d > 709.999999);
// n = 8
//new bodies has 2 bodies, one has a volume = 170 and the other has a
//volume = 710; each of them has 8 ref_faces.
bodies.clean_out();
gti->bodies(bodies);
//delete all entities
gti->delete_Body(bodies);
gti->get_free_ref_entities(free_entities);
assert(free_entities.size() ==0);
return CUBIT_SUCCESS;
}
void CubitUtil::sort_and_print_ids( const char *const heading,
DLIList<int> &id_list,
int should_sort, int report_once,
int wrap )
{
// sort, if desired
if ( should_sort ) {
id_list.sort();
}
if ( report_once ) {
DLIList <int> id_list_2( id_list );
id_list_2.reset();
id_list.clean_out();
id_list.append( id_list_2.get_and_step() );
for ( int j = id_list_2.size()-1; j--; )
{
if ( id_list_2.get() != id_list_2.prev() )
id_list.append( id_list_2.get() );
id_list_2.step();
}
}
if( wrap == -1 )
{
// print out ranges
int begin = id_list.get_and_step();
int end = begin;
int current = -1;
PRINT_INFO(" The %d %s ids are %d", id_list.size(), heading, begin);
for (int i=id_list.size()-1; i > 0; i--) {
current = id_list.get_and_step();
if (current == end+1) {
end++;
}
else {
if (end == begin) {
PRINT_INFO(", %d", current);
}
else if (end == begin+1) {
PRINT_INFO(", %d, %d", end, current);
}
else {
PRINT_INFO(" to %d, %d", end, current);
}
begin = current;
end = begin;
}
}
if (current == begin + 1) {
PRINT_INFO(", %d", current);
}
else if (current != begin) {
PRINT_INFO(" to %d", current);
}
PRINT_INFO(".\n");
}
else
{
char pre_string[67];
sprintf( pre_string, " The %d %s ids are: ", id_list.size(),heading );
CubitUtil::list_entity_ids( pre_string, id_list, wrap, ".\n", CUBIT_FALSE,
CUBIT_FALSE );
}
}
//-------------------------------------------------------------------------
// Purpose : Read and remove attributes from underlying entities
//
// Special Notes :
//
// Creator : Jason Kraftcheck
//
// Creation Date : 06/30/03
//-------------------------------------------------------------------------
void CompositeGeom::read_attributes( GeometryEntity* geom_ptr )
{
DLIList<CubitSimpleAttrib> list;
int i;
// remove any attributes from previous read
rem_all_attributes();
if (geom_ptr)
{
// Special case for point-curves (no real curves to write
// attirbutes to.) Write to passed entity instead.
assert(entityList.size() == 0);
geom_ptr->get_simple_attribute(COMPOSITE_DATA_ATTRIB_NAME,list);
list.reset();
for (i = list.size(); i--; )
{
const CubitSimpleAttrib& attrib = list.get_and_step();
assert(attrib.int_data_list().size());
if (attrib.int_data_list()[0] == entityList.size())
{
geom_ptr->remove_simple_attribute_virt(attrib);
CubitSimpleAttrib c = attrib;
c.int_data_list().erase(c.int_data_list().begin());
c.string_data_list().erase(c.string_data_list().begin());
listHead = new CompositeAttrib(c,listHead);
}
}
return;
}
int index_of_entity_with_attribs = -1;
for (i = 0; i < entityList.size(); i++)
{
list.clean_out();
entityList[i].entity->get_simple_attribute(COMPOSITE_DATA_ATTRIB_NAME,list);
if( list.size() )
index_of_entity_with_attribs = i;
list.reset();
for (int j = list.size(); j--; )
{
const CubitSimpleAttrib& attrib = list.get_and_step();
assert(attrib.int_data_list().size());
if (attrib.int_data_list()[0] == entityList.size())
{
// Take the attributes off of the current entity and put them on the first entity
// in this list. I believe this is ok to do because the attributes should apply to
// the whole composite surface and not just the underlying entity they are on
// (the one exception to this might be UNIQUE_ID but I haven't seen any problems
// with this yet). The reason for doing this is that there is some code (I believe
// in uncomposite() that assumes any attributes will be on the first entity
// in the list. Previous code actually moved the entity to the beginning
// of the list but this reordering of the list does not fly with composite
// curves because there is code depending on the curves in the list being
// ordered so that they connect end to end in a contiguous manner (the
// faceting code, for one, relies on this). BWC 1/7/07.
entityList[i].entity->remove_simple_attribute_virt(attrib);
entityList[0].entity->append_simple_attribute_virt(attrib);
CubitSimpleAttrib c = attrib;
c.int_data_list().erase(c.int_data_list().begin());
c.string_data_list().erase(c.string_data_list().begin());
if( NULL == listHead )
listHead = new CompositeAttrib(c,listHead);
else //this assures that we are not adding duplicate attribs
{
bool is_duplicate = false;
CompositeAttrib* curr_attrib = listHead;
while( curr_attrib )
{
if( curr_attrib->equals( c ) )
{
is_duplicate = true;
break;
}
curr_attrib = curr_attrib->next;
}
if( false == is_duplicate )
listHead = new CompositeAttrib(c,listHead);
}
}
}
}
}
CubitStatus FacetLump::mass_properties( CubitVector& centroid, double& volume )
{
int i;
DLIList<FacetShell*> shells( myShells.size() );
CAST_LIST( myShells, shells, FacetShell );
assert( myShells.size() == shells.size() );
DLIList<FacetSurface*> surfaces;
DLIList<FacetShell*> surf_shells;
get_surfaces( surfaces );
DLIList<CubitFacet*> facets, surf_facets;
DLIList<CubitPoint*> junk;
DLIList<CubitSense> senses;
for (i = surfaces.size(); i--; )
{
FacetSurface* surf = surfaces.step_and_get();
surf_shells.clean_out();
surf->get_shells( surf_shells );
surf_shells.intersect( shells );
assert( surf_shells.size() );
CubitSense sense = surf->get_shell_sense( surf_shells.get() );
if (surf_shells.size() == 1 && CUBIT_UNKNOWN != sense)
{
surf_facets.clean_out();
junk.clean_out();
surf->get_my_facets( surf_facets, junk );
facets += surf_facets;
for (int j = surf_facets.size(); j--; )
senses.append(sense);
}
}
const CubitVector p0 = bounding_box().center();
CubitVector p1, p2, p3, normal;
centroid.set( 0.0, 0.0, 0.0 );
volume = 0.0;
facets.reset();
senses.reset();
for (i = facets.size(); i--; )
{
CubitFacet* facet = facets.get_and_step();
CubitSense sense = senses.get_and_step();
p1 = facet->point(0)->coordinates();
p2 = facet->point(1)->coordinates();
p3 = facet->point(2)->coordinates();
normal = (p3 - p1) * (p2 - p1);
double two_area = normal.length();
if (two_area > CUBIT_RESABS )
{
if (CUBIT_REVERSED == sense)
normal = -normal;
normal /= two_area;
double height = normal % (p0 - p1);
double vol = two_area * height;
volume += vol;
centroid += vol * (p0 + p1 + p2 + p3);
}
}
if (volume > CUBIT_RESABS)
centroid /= 4.0 * volume;
volume /= 6.0;
return CUBIT_SUCCESS;
}
// order edges in list beginning at start_point
// report the endpoint
// return CUBIT_SUCCESS if all edges are connected and ordered successfully
// otherwise return CUBIT_FAILURE, in which case no changes are made
CubitStatus CubitFacetEdge::order_edge_list(DLIList<CubitFacetEdge*> &edge_list,
CubitPoint *start_point,
CubitPoint *&end_point)
{
int i;
assert(start_point);
end_point = NULL;
// invalid input
if (0 == edge_list.size())
return CUBIT_FAILURE;
// simple case of a single edge - endpoitn
if (1 == edge_list.size())
{
end_point = edge_list.get()->other_point(start_point);
return end_point ? CUBIT_SUCCESS : CUBIT_FAILURE;
}
edge_list.reset();
// note that a periodic/closed curve will fail
// we could handle that case here if needed, but we may need more information
// to know where to start and end the curve
if (NULL == start_point)
return CUBIT_FAILURE;
// put edges in a set for faster searching
std::set<CubitFacetEdge *> edge_set;
for (i=0; i<edge_list.size(); i++)
edge_set.insert(dynamic_cast<CubitFacetEdge*> (edge_list.step_and_get()));
// a vector for the ordered list
std::vector<CubitFacetEdge*> ordered_edges;
// find connected edges from the start point
CubitPoint *cur_pt = start_point;
do
{
// get edges connected to the current point and find the next edge
DLIList<CubitFacetEdge *> pt_edges;
cur_pt->edges(pt_edges);
std::set<CubitFacetEdge *>::iterator iter_found;
CubitFacetEdge *cur_edge = NULL;
for (i=0; i<pt_edges.size() && !cur_edge; i++)
{
CubitFacetEdge *tmp_edge = pt_edges.get_and_step();
iter_found = edge_set.find(tmp_edge);
if ( iter_found != edge_set.end() )
cur_edge = tmp_edge;
}
// if we don't find a connection before we empty the set
// then not all the edges are connected -- return failure
if (NULL == cur_edge)
return CUBIT_FAILURE;
// add the edge to the ordered list
ordered_edges.push_back( cur_edge );
edge_set.erase(iter_found);
cur_pt = cur_edge->other_point(cur_pt);
}
while ( edge_set.size());
if (ordered_edges.size() != edge_list.size())
return CUBIT_FAILURE;
// store the edges in the correct order
edge_list.clean_out();
std::vector<CubitFacetEdge*>::iterator iter;
for (iter=ordered_edges.begin(); iter!=ordered_edges.end(); iter++)
edge_list.append(*iter);
// get the end point
CubitFacetEdge *edge1 = edge_list[edge_list.size() - 1];
CubitFacetEdge *edge2 = edge_list[edge_list.size() - 2];
end_point = edge1->other_point( edge1->shared_point(edge2) );
return CUBIT_SUCCESS;
}
CubitStatus ModelEntity::remove_from_DAG(CubitBoolean recurse_flag)
{
// This counter will be used in the recursion to test whether
// the call is from outside or from the function itself. When
// the call comes from outside, the counter should always be
// zero.
CubitBoolean this_recurse = recurse_flag;
if (recurse_flag == CUBIT_FALSE) recurse_flag = CUBIT_TRUE;
DLIList<ModelEntity*> childModEntList;
// Check to see if there are no parents of this object.
if ( get_parents() == 0 )
{
if (this_recurse == CUBIT_FALSE)
{
// Since we are not recursing, this is a top-level entity.
// Notify the static observers that a top-level entity is being
// destructed. This must be done before children are disconnected.
CubitObservable *top_level = CAST_TO(this, CubitObservable);
CubitObserver::notify_static_observers(top_level, TOP_LEVEL_ENTITY_DESTRUCTED);
}
// Go through all the children and remove their link to
// the current object.
ModelEntity* tempModEntPtr = NULL ;
ModelEntity* childModEntPtr = NULL ;
childModEntList.clean_out();
disconnect_all_children(&childModEntList);
// The following while conditional may not work...it depends on
// what is_at_end does when you step over the end...CHECK THIS
int i;
for( i = 0 ; i < childModEntList.size() ; i++ )
{
// Get the next ModelEnti in the child list and make sure its
// pointer to its parent is removed.
tempModEntPtr = childModEntList.get_and_step();
// Try remove() on the child ModEnt. If it comes back with
// a success, then delete it.
childModEntPtr = tempModEntPtr;
if ( childModEntPtr->remove_from_DAG(recurse_flag) == CUBIT_SUCCESS )
{
// Now deactivate the child ModEnt
childModEntPtr->deactivated(CUBIT_TRUE) ;
// remove it from observables, just before we go to delete it
CubitObservable *observable = CAST_TO(childModEntPtr, CubitObservable);
if (observable)
{
if( !observable->notify_observers( MODEL_ENTITY_DESTRUCTED ) )
return CUBIT_FAILURE;
}
}
}
// If this is the top of the recursion, then clean out all the deactivated
// entities.
if (this_recurse == CUBIT_FALSE)
{
this->deactivated(CUBIT_TRUE) ;
// remove it from observables, just before we go to delete it
CubitObservable *observable = CAST_TO(childModEntPtr, CubitObservable);
if (observable)
{
if( !observable->notify_observers( MODEL_ENTITY_DESTRUCTED ) )
return CUBIT_FAILURE;
}
GeometryQueryTool::instance()->cleanout_deactivated_geometry() ;
}
return CUBIT_SUCCESS ;
}
else
{
return CUBIT_FAILURE ;
}
}
void CubitUtil::process_entity_ids( int method,
CubitString &ret_str,
const char *pre_string,
DLIList<int> &id_list,
int max_len,
const char *post_string,
int sort, int unique,
int tab_len, const char *sep_string,
const char* post_string_none )
{
// Method: 0 - to a string
// 1 - to PRINT_INFO
char temp[200];
if ( id_list.size() == 0 ) {
if( method )
PRINT_INFO("%s%s", pre_string, post_string_none );
else
{
sprintf( temp, "%s%s", pre_string, post_string_none );
ret_str = temp;
}
if( fp )
fprintf( fp, "%s%s", pre_string, post_string_none );
return;
}
// sort
if( sort )
{
id_list.sort();
// make unique
if( unique )
{
int i;
DLIList <int> id_list_2( id_list );
id_list_2.reset();
id_list.clean_out();
id_list.append( id_list_2.get_and_step() );
for ( i=id_list_2.size()-1; i--; )
{
if ( id_list_2.get() != id_list_2.prev() )
id_list.append( id_list_2.get() );
id_list_2.step();
}
}
}
if( max_len < 0 )
max_len = CUBIT_INT_MAX/2;
// TODO: wrap prestring, if necessary
if( method )
PRINT_INFO( "%s", pre_string );
else
ret_str = pre_string;
if( fp )
fprintf( fp, "%s", pre_string );
// Keep track of length printed
int curr_len = strlen(pre_string);
int num = 0;
int begin = id_list.get();
int previous = begin;
int current;
int comma = 0; // Is comma needed
int beg_len, prev_len;
int sep_len = strlen( sep_string );
// Setup the tab
char* tab = new char[tab_len+1];
for( int i=0; i<tab_len; i++ )
tab[i] = ' ';
tab[tab_len] = '\0';
// Loop until all the ids are printed. Use ranges if possible.
while( num < id_list.size()+1 )
{
current = id_list.get_and_step();
num++;
// Handle last entity
if( num <= id_list.size() )
{
if( num==1 ) // Handle 1st time in loop
continue;
if( current==previous+1 )
{
previous = current;
continue;
}
}
// If we are here, we are no longer tracking a range and
// need to print the range or a number.
if( comma )
{
if( method )
PRINT_INFO("%s", sep_string );
else
ret_str += sep_string;
if( fp )
fprintf( fp, "%s", sep_string );
curr_len += sep_len;
}
if( begin==previous )
{
// a single number
prev_len = int_len(previous);
if( curr_len+1+prev_len+sep_len > max_len )
{
if( method )
{
PRINT_INFO( "\n" );
PRINT_INFO( "%s%d", tab, previous );
}
else
{
sprintf( temp, "\n%s%d", tab, previous );
ret_str += temp;
}
if( fp )
fprintf( fp, "\n%s%d", tab, previous );
curr_len = tab_len + prev_len;
}
else
{
if( comma ) // Don't print space before first item
{
if( method )
PRINT_INFO( " " );
else
ret_str += " ";
if( fp )
fprintf( fp, " " );
curr_len++;
}
if( method )
PRINT_INFO( "%d", previous );
else
{
sprintf( temp, "%d", previous );
ret_str += temp;
}
if( fp )
fprintf( fp, "%d", previous );
curr_len = curr_len + prev_len;
}
}
else if( previous==begin+1 )
{
// a range, but only 2 consecutive numbers
prev_len = int_len(previous);
beg_len = int_len(begin);
// Print 1st
if( curr_len+1+beg_len+sep_len > max_len )
{
if( method )
{
PRINT_INFO( "\n" );
PRINT_INFO( "%s%d%s", tab, begin, sep_string );
}
else
{
sprintf( temp, "\n%s%d%s", tab, begin, sep_string );
ret_str += temp;
}
if( fp )
fprintf( fp, "\n%s%d%s", tab, begin, sep_string );
curr_len = tab_len + beg_len + sep_len;
}
else
{
if( comma ) // Don't print space before first item
{
if( method )
PRINT_INFO( " " );
else
ret_str += " ";
if( fp )
fprintf( fp, " " );
curr_len++;
}
if( method )
PRINT_INFO( "%d%s", begin, sep_string );
else
{
sprintf( temp, "%d%s", begin, sep_string );
ret_str += temp;
}
if( fp )
fprintf( fp, "%d%s", begin, sep_string );
curr_len = curr_len + beg_len + sep_len;
}
// Print 2nd
if( curr_len+1+prev_len+sep_len > max_len )
{
if( method )
{
PRINT_INFO( "\n" );
PRINT_INFO( "%s%d", tab, previous );
}
else
{
sprintf( temp, "\n%s%d", tab, previous );
ret_str += temp;
}
if( fp )
fprintf( fp, "\n%s%d", tab, previous );
curr_len = tab_len + prev_len;
}
else
{
if( method )
PRINT_INFO( " %d", previous );
else
{
sprintf( temp, " %d", previous );
ret_str += temp;
}
if( fp )
fprintf( fp, " %d", previous );
curr_len = curr_len + 1+prev_len;
}
}
else
{
// a range of 3 or more consecutive numbers
prev_len = int_len(previous);
beg_len = int_len(begin);
if( curr_len+beg_len+prev_len+5+sep_len > max_len )
{
if( method )
{
PRINT_INFO( "\n" );
PRINT_INFO( "%s%d to %d", tab, begin, previous );
}
else
{
sprintf( temp, "\n%s%d to %d", tab, begin, previous );
ret_str += temp;
}
if( fp )
fprintf( fp, "\n%s%d to %d", tab, begin, previous );
curr_len = tab_len + beg_len+prev_len+4;
}
else
{
if( comma ) // Don't print space before first item
{
if( method )
PRINT_INFO( " " );
else
ret_str += " ";
if( fp )
fprintf( fp, " " );
curr_len++;
}
if( method )
PRINT_INFO( "%d to %d", begin, previous );
else
{
sprintf( temp, "%d to %d", begin, previous );
ret_str += temp;
}
if( fp )
fprintf( fp, "%d to %d", begin, previous );
curr_len = curr_len + beg_len+4+prev_len;
}
}
begin = current;
previous = current;
comma = 1;
}
//TODO: wrap poststring, if required
if (post_string) {
if( method )
PRINT_INFO( "%s", post_string );
else
ret_str += post_string;
if( fp )
fprintf( fp, "%s", post_string );
}
delete [] tab;
}
// The main midsurface function
// lower_tol, upper_tol and preview are optional
CubitStatus AutoMidsurfaceTool::midsurface(
DLIList<Body*> &body_list_in,
DLIList<BodySM*> &body_list_out,
DLIList<Body*> &old_bodies_midsurfaced,
DLIList<double> &thickness_out,
double lower_limit,
double upper_limit,
CubitBoolean delete_midsurfaced,
CubitBoolean preview)
{
if(lower_limit == CUBIT_DBL_MAX)// no limit set
lower_limit = -CUBIT_DBL_MAX;
double lower_tol = CUBIT_DBL_MAX;
double upper_tol = CUBIT_DBL_MAX;
const double auto_thickness_margin = 0.05; // if the user wants to automatically find the search
// thickness then this var give the search margin around the
// guess
ProgressTool* prog_tool = 0;
if(body_list_in.size()>5)
prog_tool = AppUtil::instance()->progress_tool();
// At lease one body must be provided
if(body_list_in.size() < 1)
{
PRINT_ERROR( "No bodies given for midsurfacing\n" );
return CUBIT_FAILURE;
}
// The surfaceOverlapTool is persistent so we need to save the
// max_gap and such to restore them at the end or if we error out
// save current settings
double max_gap_save = SurfaceOverlapTool::instance()->get_gap_max();
double min_gap_save = SurfaceOverlapTool::instance()->get_gap_min();
int normal_type = SurfaceOverlapTool::instance()->get_normal_type();
CubitBoolean cubit_bool_save = SurfaceOverlapTool::instance()->get_check_within_bodies();
CubitBoolean skip_facing_surfaces = SurfaceOverlapTool::instance()->get_skip_facing_surfaces();
// we want to only find overlap within a body
SurfaceOverlapTool::instance()->set_check_within_bodies(CUBIT_TRUE);
// 1=any, 2=opposite, 3=same - we want to find only the overlaps that normals
// pointing in the opposite directions
SurfaceOverlapTool::instance()->set_normal_type(2);
// Don't pickup surfaces that face each other
SurfaceOverlapTool::instance()->set_skip_facing_surfaces(CUBIT_TRUE);
// list of bodies that fail to midsurface
DLIList<Body*> failing_bodies;
GeometryModifyEngine* gme = 0;
GeometryQueryEngine* gqe = 0;
// loop over every body and try to create midsurface(s)
int i = 0;
CubitStatus return_status = CUBIT_FAILURE;
if(prog_tool)
prog_tool->start(0,body_list_in.size());
for(i = body_list_in.size();i--;)
{
if(prog_tool)
prog_tool->step();
Body* cur_body = body_list_in[i];
if(!cur_body)
continue;
BodySM* body_sm = cur_body->get_body_sm_ptr();
if(!body_sm)
continue;
if(cur_body->is_sheet_body())
{
PRINT_INFO("Body %d is a sheet body.\n",cur_body->id());
continue;
}
// Grab the geometrymodify and geometryquery engines to use later
gqe = cur_body->get_geometry_query_engine();
gme = GeometryModifyTool::instance()->get_engine(body_sm);
if(!gqe || !gme)
continue;
// Here are the steps to finding/creating the midsurface
// 1. If the user did not give a thickness range to search then
// make an educated guess at the proper thickness range. The assumption
// is that the midsurface is a square and the thickness is constant.
// The resulting equation is a third order polynomial that is solved using
// a few newton iterations. The initial thickness guess is Volume/Area
// 2. Using the given search distances use the SurfaceOverlapTool to find
// surface pairs.
// 3. If there is only one surface pair then use the existing midsurface commands
// 4. Find if the surface pairs represent two surface patches
// 5. If there are only two surface patches try to offset one of the patches
// 6. (this step is commented out for now) - If 5 fails or there are more than
// two surface patches then try the following:
// - Use the manual midsurface creation function to create midsurfaces for each
// pair of surfaces.
// - Unite all of the created midsurfaces together
// - remove any surfaces that have a curve touching a surface pair
// - Regularize the resulting body
// 7. Done
{
PRINT_DEBUG_198("AUTOMATICALLY calculating search range\n");
DLIList<RefVolume*> vol_list;
cur_body->ref_volumes(vol_list);
double total_vol = 0;
double total_vol_bb = 0;
for(int vol_cnt = 0; vol_cnt < vol_list.size(); vol_cnt++)
{
CubitVector cg;
double temp_volume;
vol_list[vol_cnt]->mass_properties(cg,temp_volume);
CubitBox vol_bb = vol_list[vol_cnt]->bounding_box();
total_vol += temp_volume;
total_vol_bb += vol_bb.x_range()*vol_bb.y_range()*vol_bb.z_range();
}
if(total_vol<0 || total_vol > total_vol_bb)
{
PRINT_INFO("Could not midsurface Body %d - try healing the body.\n",cur_body->id());
failing_bodies.append(cur_body);
continue;
}
PRINT_DEBUG_198("Volume of %f\n",total_vol);
DLIList<RefFace*> face_list;
cur_body->ref_faces(face_list);
double total_surf = 0;
for(int surf_cnt = 0; surf_cnt < face_list.size(); surf_cnt++)
total_surf += face_list[surf_cnt]->area();
PRINT_DEBUG_198("Area of %f\n",total_surf);
double t_g = total_vol/(total_surf/2.0);
double initial_guess = t_g;
PRINT_DEBUG_198("Initial guess of thickness %f\n",t_g);
// use a newton solver to get a more accurate estimate the thickness of the volume
for(int n_i = 0;n_i<100;n_i++)
{
double tol_newton = GEOMETRY_RESABS;
double t_gn = t_g + tol_newton;
double f_prime = ((2.0*total_vol + sqrt(total_vol*t_g*t_g*t_g)*4.0 - total_surf*t_g)
-(2.0*total_vol + sqrt(total_vol*t_gn*t_gn*t_gn)*4.0 - total_surf*t_gn))/
(t_g-t_gn);
// avoid divide by zero
if(fabs(f_prime)<tol_newton)
break;
double t_old = t_g;
t_g = t_g - (2.0*total_vol + sqrt(total_vol*t_g*t_g*t_g)*4.0 - total_surf*t_g)/f_prime;
PRINT_DEBUG_198("Guess %d Thickness %f\n",n_i,t_g);
if(fabs(t_g-t_old)<tol_newton)
{
PRINT_DEBUG_198("Converged with thickness of %f in %d steps\n",t_g,n_i);
break;
}
if(t_g<0.0)
{
PRINT_DEBUG_198("thickness less than zero setting back to initial guess\n");
t_g = fabs(initial_guess);
break;
}
}
upper_tol = t_g + t_g*auto_thickness_margin;
lower_tol = t_g - t_g*auto_thickness_margin;
upper_tol = upper_tol <= upper_limit?upper_tol:upper_limit;
lower_tol = lower_tol >= lower_limit?lower_tol:lower_limit;
PRINT_DEBUG_198("Guessing a thickness of %f to %f\n",lower_tol,upper_tol);
}
// set the lower and upper search distances
SurfaceOverlapTool::instance()->set_gap_max(upper_tol);
SurfaceOverlapTool::instance()->set_gap_min(lower_tol);
DLIList<RefFace*> ref_face_list,list1,list2;
DLIList<RefEntity*> faces_to_draw;
cur_body->ref_faces(ref_face_list);
// find the surface pairs
SurfaceOverlapTool::instance()->find_overlapping_surfaces(ref_face_list,list1,list2,faces_to_draw);
int tweak_iters = 4;
for(int tweak = 0;tweak<tweak_iters;tweak++)
{
// if we didn't find anything then the part may be long and selender so grow the search thickness
if(list1.size()==0 && list2.size() == 0)
{
if(tweak == tweak_iters-1 && lower_limit != -CUBIT_DBL_MAX && upper_limit != CUBIT_DBL_MAX)
{
// on the last try use the user defined limits
lower_tol = lower_limit;
upper_tol = upper_limit;
}
else
{
lower_tol = (upper_tol + lower_tol)/2.0;
upper_tol += lower_tol*auto_thickness_margin*2;
upper_tol = upper_tol <= upper_limit?upper_tol:upper_limit;
lower_tol = lower_tol >= lower_limit?lower_tol:lower_limit;
}
PRINT_DEBUG_198("Guessing again with thickness of %f to %f\n",lower_tol,upper_tol);
SurfaceOverlapTool::instance()->set_gap_max(upper_tol);
SurfaceOverlapTool::instance()->set_gap_min(lower_tol);
SurfaceOverlapTool::instance()->find_overlapping_surfaces(ref_face_list,list1,list2,faces_to_draw);
}
DLIList<RefFace*> check_list;
check_list += list1;
check_list += list2;
if(check_list.size() == 0 )
continue;
// make sure the pairs will match the solid within 10% or so
if(!check_surf_pairs(lower_tol,upper_tol,check_list,cur_body))
{
list1.clean_out();
list2.clean_out();
continue;
}
break;
}
if(list1.size() != list2.size())
{
PRINT_INFO("Could not find workable surface pairs for Body %d - try using the Sheet Offset command. \n",cur_body->id());
failing_bodies.append(cur_body);
continue;
}
else if(list1.size() == 0 || list2.size() == 0)
{
PRINT_INFO("No surface pairs found for Body %d - try changing the search range\n",cur_body->id());
failing_bodies.append(cur_body);
continue;
}
// get the first pair and see if there are only two patches
DLIList<RefFace*> red_faces;
red_faces.append(list1[0]);
DLIList<RefFace*> yellow_faces;
yellow_faces.append(list2[0]);
DLIList<RefFace*> paired_faces;
paired_faces += list1;
paired_faces += list2;
paired_faces.uniquify_unordered();
// red surfaces
while(1)
{
int start_cnt = red_faces.size();
DLIList<RefEdge*> red_edges;
int j = 0;
for(j =0;j<red_faces.size();j++)
red_faces[j]->ref_edges(red_edges);
red_edges.uniquify_unordered();
for(j =0;j<red_edges.size();j++)
red_edges[j]->ref_faces(red_faces);
red_faces.uniquify_unordered();
red_faces.intersect_unordered(paired_faces);
if(start_cnt == red_faces.size())
break;
}
// yellow surfaces
while(1)
{
int start_cnt = yellow_faces.size();
DLIList<RefEdge*> yellow_edges;
int j = 0;
for(j =0;j<yellow_faces.size();j++)
yellow_faces[j]->ref_edges(yellow_edges);
yellow_edges.uniquify_unordered();
for(j =0;j<yellow_edges.size();j++)
yellow_edges[j]->ref_faces(yellow_faces);
yellow_faces.uniquify_unordered();
yellow_faces.intersect_unordered(paired_faces);
if(start_cnt == yellow_faces.size())
break;
}
DLIList<BodySM*> results;
bool midsurface_done = false;
if(DEBUG_FLAG(198))
{
int j = 0;
PRINT_INFO("Trying surface offset to create the mid_surface\n");
PRINT_INFO("Red surface ");
for(j = 0;j < red_faces.size();j++)
{
GfxDebug::draw_ref_face(red_faces[j],CUBIT_RED);
PRINT_INFO("%d ",red_faces[j]->id());
}
PRINT_INFO("\nYellow surface ");
for(j = 0;j < yellow_faces.size();j++)
{
GfxDebug::draw_ref_face(yellow_faces[j],CUBIT_YELLOW);
PRINT_INFO("%d ",yellow_faces[j]->id());
}
PRINT_INFO("\n");
}
// first check to see if we can use the simple midsurface functions
if(red_faces.size() == 1 && yellow_faces.size() == 1 &&
paired_faces.size() == red_faces.size() + yellow_faces.size())
{
RefFace* face_1 = red_faces[0];
RefFace* face_2 = yellow_faces[0];
midsurface_done = false;
if(face_1->geometry_type() == face_2->geometry_type())
{
Surface* surf_1 = face_1->get_surface_ptr();
Surface* surf_2 = face_2->get_surface_ptr();
BodySM* result_body;
// grab the distance between surfaces
CubitVector temp_vec0;
CubitVector temp_vec1;
double temp_dist = 0;
gqe->entity_entity_distance(
face_1->get_surface_ptr(),
face_2->get_surface_ptr(),
temp_vec0,temp_vec1,temp_dist);
switch(face_1->geometry_type())
{
case CONE_SURFACE_TYPE:
if(gme->get_conic_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
{
midsurface_done = true;
results.append(result_body);
thickness_out.append(fabs(temp_dist));
}
break;
case PLANE_SURFACE_TYPE:
if(get_planar_mid_surface(face_1,face_2,body_sm,result_body,gme) == CUBIT_SUCCESS)
{
midsurface_done = true;
results.append(result_body);
thickness_out.append(fabs(temp_dist));
}
break;
case SPHERE_SURFACE_TYPE:
if(gme->get_spheric_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
{
midsurface_done = true;
results.append(result_body);
thickness_out.append(fabs(temp_dist));
}
break;
case TORUS_SURFACE_TYPE:
if(gme->get_toric_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
{
midsurface_done = true;
results.append(result_body);
thickness_out.append(fabs(temp_dist));
}
break;
case CYLINDER_SURFACE_TYPE:
if(gme->get_conic_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
{
midsurface_done = true;
results.append(result_body);
thickness_out.append(fabs(temp_dist));
}
break;
default:
break;
}
}
}
if(!midsurface_done &&
paired_faces.size() == red_faces.size() + yellow_faces.size()) // just do the offset
{
int j = 0;
DLIList<double> offset_distances;
for(j = 0;j<list1.size();j++)
{
CubitVector temp_vec0;
CubitVector temp_vec1;
double temp_dist = 0;
if(!gqe->entity_entity_distance(
list1[j]->get_surface_ptr(),
list2[j]->get_surface_ptr(),
temp_vec0,temp_vec1,temp_dist))
{
break;
}
offset_distances.append(-temp_dist*.5);
}
DLIList<Surface*> red_surfs;
for(j = 0;j<red_faces.size();j++)
red_surfs.append(red_faces[j]->get_surface_ptr());
DLIList<Surface*> yellow_surfs;
for(j = 0;j<yellow_faces.size();j++)
yellow_surfs.append(yellow_faces[j]->get_surface_ptr());
// all of the surfaces are offset the same distance
double offset_distance = offset_distances[0];
bool old_error_flag = GET_ERROR_FLAG();
SET_ERROR_FLAG(false); // don't throw any gme errors
if( gme->create_offset_sheet(red_surfs,offset_distance,
NULL,NULL,results))
{
midsurface_done = true;
for(j = 0;j<results.size();j++) // for every body add a thickness
thickness_out.append(fabs(offset_distance*2.));
}
else if( gme->create_offset_sheet(yellow_surfs,offset_distance,
NULL,NULL,results)) // try the other direction
{
midsurface_done = true;
for(j = 0;j<results.size();j++) // for every body add a thickness
thickness_out.append(fabs(offset_distance*2.));
}
else
{
PRINT_INFO("Could not create midsurface for Body %d - try using the surface offset command\n",cur_body->id());
failing_bodies.append(cur_body);
}
SET_ERROR_FLAG(old_error_flag); // turn errors back on
}
if(!midsurface_done && paired_faces.size() != red_faces.size() + yellow_faces.size())
{
PRINT_INFO("Could not find workable surface pairs for Body %d - try changing the search range or \n"
" using the Sheet Offset command.\n",cur_body->id());
}
/*if(!midsurface_done)
{
if(DEBUG_FLAG(198))
PRINT_INFO("Trying the extend, unite, and trim method\n");
// okay now remove duplicate pairs and unsupported pairs
DLIList<Surface*> surf_list1;
DLIList<Surface*> surf_list2;
bool delete_and_exit = false;
for(int j = 0;j<list1.size();j++)
{
RefFace* face_1 = list1[j];
RefFace* face_2 = list2[j];
if(DEBUG_FLAG(198))
{
PRINT_INFO("Red surface ");
GfxDebug::draw_ref_face(face_1,CUBIT_RED);
PRINT_INFO("%d ",face_1->id());
PRINT_INFO("\nYellow surface ");
GfxDebug::draw_ref_face(face_2,CUBIT_YELLOW);
PRINT_INFO("%d ",face_2->id());
PRINT_INFO("\n");
}
if(face_1->geometry_type() != face_2->geometry_type())
continue;
Surface* surf_1 = face_1->get_surface_ptr();
surf_list1.append(surf_1);
Surface* surf_2 = face_2->get_surface_ptr();
surf_list2.append(surf_2);
BodySM* result_body;
switch(face_1->geometry_type())
{
case CONE_SURFACE_TYPE:
if(gme->get_conic_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
results.append(result_body);
else
delete_and_exit = true;
break;
case PLANE_SURFACE_TYPE:
if(get_planar_mid_surface(face_1,face_2,body_sm,result_body,gme) == CUBIT_SUCCESS)
results.append(result_body);
else
delete_and_exit = true;
break;
case SPHERE_SURFACE_TYPE:
if(gme->get_spheric_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
results.append(result_body);
else
delete_and_exit = true;
break;
case TORUS_SURFACE_TYPE:
if(gme->get_toric_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
results.append(result_body);
else
delete_and_exit = true;
break;
case CYLINDER_SURFACE_TYPE:
if(gme->get_conic_mid_surface(surf_1,surf_2,body_sm,result_body) == CUBIT_SUCCESS)
results.append(result_body);
else
delete_and_exit = true;
break;
default:
delete_and_exit = true;
break;
}
if(delete_and_exit)
{
PRINT_WARNING("Failed to pair surface %d with surface %d\n",face_1->id(),face_2->id());
break;
}
}
if(delete_and_exit)
{
failing_bodies.append(cur_body);
gqe->delete_solid_model_entities(results);
continue;
}
DLIList<BodySM*> unite_results;
if(results.size()>1)
{
bool reg_result = GeometryModifyTool::instance()->boolean_regularize();
GeometryModifyTool::instance()->boolean_regularize(true);
if(gme->unite(results,unite_results)== CUBIT_SUCCESS)
{
// if the unite works just add them to the result list
results = unite_results;
}
else
{
// clean up the created surfaces and move on to the next
// body
failing_bodies.append(cur_body);
gqe->delete_solid_model_entities(results);
GeometryModifyTool::instance()->boolean_regularize(reg_result);
continue;
}
GeometryModifyTool::instance()->boolean_regularize(reg_result);
}
// trim the hanging surfaces
DLIList<Surface*> paired_surfs;
paired_surfs += surf_list1;
paired_surfs += surf_list2;
DLIList<Curve*> all_curves;
int k = 0;
for(k = 0;k<results.size();k++)
results[k]->curves(all_curves);
all_curves.uniquify_unordered();
DLIList<Surface*> remove_surfs;
for(k = 0;k<all_curves.size();k++)
for(int m = 0;m<paired_surfs.size();m++)
if(curve_in_surface(all_curves[k],paired_surfs[m]))
all_curves[k]->surfaces(remove_surfs);
remove_surfs.uniquify_unordered();
body_list_out += results;
DLIList<BodySM*> tweak_results;
if(gme->tweak_remove(remove_surfs,tweak_results,CUBIT_FALSE))
{
results = tweak_results;
}
else
{
// clean up the created surfaces and move on to the next
// body
failing_bodies.append(cur_body);
gqe->delete_solid_model_entities(results);
continue;
}
DLIList<BodySM*> regularize_results;
// regularize the results
for(k = 0;k < results.size();k++)
{
BodySM* new_body = 0;
if(gme->regularize_body(results[k],new_body))
regularize_results.append(new_body);
else if(DEBUG_FLAG(198))
PRINT_INFO("Regularize failure\n");
}
results = regularize_results;
}*/
if(!midsurface_done)
{
failing_bodies.append(cur_body);
continue;
}
old_bodies_midsurfaced.append(cur_body);
if(delete_midsurfaced && !preview)
GeometryQueryTool::instance()->delete_Body(cur_body);
return_status = CUBIT_SUCCESS;
body_list_out += results;
}
if(prog_tool)
prog_tool->end();
PRINT_INFO("Successfully midsurface %d of %d bodies\n",body_list_out.size(),body_list_in.size());
if(preview)
{
for(int k = 0;k<body_list_out.size();k++)
{
DLIList<Surface*> preview_surfaces;
body_list_out[k]->surfaces(preview_surfaces);
for(int p = 0;p<preview_surfaces.size();p++)
GfxPreview::draw_surface_facets_shaded(preview_surfaces[p],CUBIT_BLUE);
}
GfxPreview::flush();
if(gqe)
gqe->delete_solid_model_entities(body_list_out);
body_list_out.clean_out();
}
if(failing_bodies.size() > 0)
{
PRINT_INFO("\n");
PRINT_INFO("Failed to midsurface Body ");
for(i = 0;i<failing_bodies.size();i++)
PRINT_INFO("%d ",failing_bodies[i]->id());
PRINT_INFO("\n");
}
if(DEBUG_FLAG(198))
GfxDebug::flush();
SurfaceOverlapTool::instance()->set_check_within_bodies(cubit_bool_save);
SurfaceOverlapTool::instance()->set_gap_max(max_gap_save);
SurfaceOverlapTool::instance()->set_normal_type(normal_type);
SurfaceOverlapTool::instance()->set_gap_min(min_gap_save);
SurfaceOverlapTool::instance()->set_skip_facing_surfaces(skip_facing_surfaces);
return return_status;
}