Exemplo n.º 1
0
/**
 * Identify autoboot device
 *
 */
void efi_set_autoboot ( void ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	union {
		EFI_SIMPLE_NETWORK_PROTOCOL *snp;
		void *interface;
	} snp;
	EFI_SIMPLE_NETWORK_MODE *mode;
	EFI_STATUS efirc;

	/* Look for an SNP instance on the image's device handle */
	if ( ( efirc = bs->OpenProtocol ( efi_loaded_image->DeviceHandle,
					  &efi_simple_network_protocol_guid,
					  &snp.interface, efi_image_handle,
					  NULL,
					  EFI_OPEN_PROTOCOL_GET_PROTOCOL ))!=0){
		DBGC ( efi_loaded_image, "EFI found no autoboot device\n" );
		return;
	}

	/* Record autoboot device */
	mode = snp.snp->Mode;
	set_autoboot_ll_addr ( &mode->CurrentAddress, mode->HwAddressSize );
	DBGC ( efi_loaded_image, "EFI found autoboot link-layer address:\n" );
	DBGC_HDA ( efi_loaded_image, 0, &mode->CurrentAddress,
		   mode->HwAddressSize );

	/* Close protocol */
	bs->CloseProtocol ( efi_loaded_image->DeviceHandle,
			    &efi_simple_network_protocol_guid,
			    efi_image_handle, NULL );
}
Exemplo n.º 2
0
/**
 * Write to PCI configuration space
 *
 * @v pci		PCI device
 * @v location		Encoded offset and width
 * @v value		Value
 * @ret rc		Return status code
 */
int efipci_write ( struct pci_device *pci, unsigned long location,
		   unsigned long value ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *root;
	EFI_HANDLE handle;
	EFI_STATUS efirc;
	int rc;

	/* Identify root bridge */
	if ( ( rc = efipci_root ( pci, &handle, &root ) ) != 0 )
		goto err_root;

	/* Read from configuration space */
	if ( ( efirc = root->Pci.Write ( root, EFIPCI_WIDTH ( location ),
					 efipci_address ( pci, location ), 1,
					 &value ) ) != 0 ) {
		rc = -EEFI ( efirc );
		DBGC ( pci, "EFIPCI " PCI_FMT " config write to offset %02lx "
		       "failed: %s\n", PCI_ARGS ( pci ),
		       EFIPCI_OFFSET ( location ), strerror ( rc ) );
		goto err_write;
	}

 err_write:
	bs->CloseProtocol ( handle, &efi_pci_root_bridge_io_protocol_guid,
			    efi_image_handle, handle );
 err_root:
	return rc;
}
Exemplo n.º 3
0
/**
 * Detach driver from device
 *
 * @v efidev		EFI device
  */
void snpnet_stop ( struct efi_device *efidev ) {
    EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
    struct net_device *netdev = efidev_get_drvdata ( efidev );
    struct snp_nic *snp = netdev->priv;
    EFI_HANDLE device = efidev->device;
    EFI_STATUS efirc;
    int rc;

    /* Unregister network device */
    unregister_netdev ( netdev );

    /* Stop SNP protocol */
    if ( ( efirc = snp->snp->Stop ( snp->snp ) ) != 0 ) {
        rc = -EEFI ( efirc );
        DBGC ( device, "SNP %s could not stop: %s\n",
               efi_handle_name ( device ), strerror ( rc ) );
        /* Nothing we can do about this */
    }

    /* Free network device */
    list_del ( &snp->dev.siblings );
    netdev_nullify ( netdev );
    netdev_put ( netdev );

    /* Close SNP protocol */
    bs->CloseProtocol ( device, &efi_simple_network_protocol_guid,
                        efi_image_handle, device );
}
Exemplo n.º 4
0
EFI_STATUS EFIAPI
OvrCloseProtocol(
	IN EFI_HANDLE		Handle,
	IN EFI_GUID			*Protocol,
	IN EFI_HANDLE		AgentHandle,
	IN EFI_HANDLE		ControllerHandle
)
{
	EFI_STATUS			Status;
	
	Status = gOrgBS.CloseProtocol(Handle, Protocol, AgentHandle, ControllerHandle);
	PRINT("->CloseProtocol(%p, %s, %p, %p) = %r\n", Handle, GuidStr(Protocol), AgentHandle, ControllerHandle, Status);
	return Status;
}
Exemplo n.º 5
0
Arquivo: nii.c Projeto: baloo/ipxe
/**
 * Detach driver from device
 *
 * @v efidev		EFI device
 */
void nii_stop ( struct efi_device *efidev ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	struct net_device *netdev = efidev_get_drvdata ( efidev );
	struct nii_nic *nii = netdev->priv;
	EFI_HANDLE device = efidev->device;

	/* Unregister network device */
	unregister_netdev ( netdev );

	/* Stop UNDI */
	nii_stop_undi ( nii );

	/* Close PCI I/O protocols */
	nii_pci_close ( nii );

	/* Close NII protocol */
	bs->CloseProtocol ( device, &efi_nii31_protocol_guid,
			    efi_image_handle, device );

	/* Free network device */
	list_del ( &nii->dev.siblings );
	netdev_nullify ( netdev );
	netdev_put ( netdev );
}
Exemplo n.º 6
0
/**
 * Close EFI PCI device
 *
 * @v device		EFI device handle
 */
void efipci_close ( EFI_HANDLE device ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;

	bs->CloseProtocol ( device, &efi_pci_io_protocol_guid,
			    efi_image_handle, device );
}
Exemplo n.º 7
0
/**
 * Open EFI PCI device
 *
 * @v device		EFI device handle
 * @v attributes	Protocol opening attributes
 * @v pci		PCI device to fill in
 * @ret rc		Return status code
 */
int efipci_open ( EFI_HANDLE device, UINT32 attributes,
		  struct pci_device *pci ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	union {
		EFI_PCI_IO_PROTOCOL *pci_io;
		void *interface;
	} pci_io;
	UINTN pci_segment, pci_bus, pci_dev, pci_fn;
	unsigned int busdevfn;
	EFI_STATUS efirc;
	int rc;

	/* See if device is a PCI device */
	if ( ( efirc = bs->OpenProtocol ( device, &efi_pci_io_protocol_guid,
					  &pci_io.interface, efi_image_handle,
					  device, attributes ) ) != 0 ) {
		rc = -EEFI_PCI ( efirc );
		DBGCP ( device, "EFIPCI %s cannot open PCI protocols: %s\n",
			efi_handle_name ( device ), strerror ( rc ) );
		goto err_open_protocol;
	}

	/* Get PCI bus:dev.fn address */
	if ( ( efirc = pci_io.pci_io->GetLocation ( pci_io.pci_io, &pci_segment,
						    &pci_bus, &pci_dev,
						    &pci_fn ) ) != 0 ) {
		rc = -EEFI ( efirc );
		DBGC ( device, "EFIPCI %s could not get PCI location: %s\n",
		       efi_handle_name ( device ), strerror ( rc ) );
		goto err_get_location;
	}
	busdevfn = PCI_BUSDEVFN ( pci_segment, pci_bus, pci_dev, pci_fn );
	pci_init ( pci, busdevfn );
	DBGCP ( device, "EFIPCI " PCI_FMT " is %s\n",
		PCI_ARGS ( pci ), efi_handle_name ( device ) );

	/* Try to enable I/O cycles, memory cycles, and bus mastering.
	 * Some platforms will 'helpfully' report errors if these bits
	 * can't be enabled (for example, if the card doesn't actually
	 * support I/O cycles).  Work around any such platforms by
	 * enabling bits individually and simply ignoring any errors.
	 */
	pci_io.pci_io->Attributes ( pci_io.pci_io,
				    EfiPciIoAttributeOperationEnable,
				    EFI_PCI_IO_ATTRIBUTE_IO, NULL );
	pci_io.pci_io->Attributes ( pci_io.pci_io,
				    EfiPciIoAttributeOperationEnable,
				    EFI_PCI_IO_ATTRIBUTE_MEMORY, NULL );
	pci_io.pci_io->Attributes ( pci_io.pci_io,
				    EfiPciIoAttributeOperationEnable,
				    EFI_PCI_IO_ATTRIBUTE_BUS_MASTER, NULL );

	/* Populate PCI device */
	if ( ( rc = pci_read_config ( pci ) ) != 0 ) {
		DBGC ( device, "EFIPCI " PCI_FMT " cannot read PCI "
		       "configuration: %s\n",
		       PCI_ARGS ( pci ), strerror ( rc ) );
		goto err_pci_read_config;
	}

	return 0;

 err_pci_read_config:
 err_get_location:
	bs->CloseProtocol ( device, &efi_pci_io_protocol_guid,
			    efi_image_handle, device );
 err_open_protocol:
	return rc;
}
Exemplo n.º 8
0
/**
 * Attach driver to device
 *
 * @v efidev		EFI device
 * @ret rc		Return status code
 */
int snpnet_start ( struct efi_device *efidev ) {
    EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
    EFI_HANDLE device = efidev->device;
    EFI_SIMPLE_NETWORK_MODE *mode;
    struct net_device *netdev;
    struct snp_nic *snp;
    void *interface;
    EFI_STATUS efirc;
    int rc;

    /* Open SNP protocol */
    if ( ( efirc = bs->OpenProtocol ( device,
                                      &efi_simple_network_protocol_guid,
                                      &interface, efi_image_handle, device,
                                      ( EFI_OPEN_PROTOCOL_BY_DRIVER |
                                        EFI_OPEN_PROTOCOL_EXCLUSIVE )))!=0) {
        rc = -EEFI ( efirc );
        DBGC ( device, "SNP %s cannot open SNP protocol: %s\n",
               efi_handle_name ( device ), strerror ( rc ) );
        DBGC_EFI_OPENERS ( device, device,
                           &efi_simple_network_protocol_guid );
        goto err_open_protocol;
    }

    /* Allocate and initialise structure */
    netdev = alloc_etherdev ( sizeof ( *snp ) );
    if ( ! netdev ) {
        rc = -ENOMEM;
        goto err_alloc;
    }
    netdev_init ( netdev, &snpnet_operations );
    snp = netdev->priv;
    snp->efidev = efidev;
    snp->snp = interface;
    mode = snp->snp->Mode;
    efidev_set_drvdata ( efidev, netdev );

    /* Populate underlying device information */
    efi_device_info ( device, "SNP", &snp->dev );
    snp->dev.driver_name = "SNP";
    snp->dev.parent = &efidev->dev;
    list_add ( &snp->dev.siblings, &efidev->dev.children );
    INIT_LIST_HEAD ( &snp->dev.children );
    netdev->dev = &snp->dev;

    /* Bring to the Started state */
    if ( ( mode->State == EfiSimpleNetworkStopped ) &&
            ( ( efirc = snp->snp->Start ( snp->snp ) ) != 0 ) ) {
        rc = -EEFI ( efirc );
        DBGC ( device, "SNP %s could not start: %s\n",
               efi_handle_name ( device ), strerror ( rc ) );
        goto err_start;
    }
    if ( ( mode->State == EfiSimpleNetworkInitialized ) &&
            ( ( efirc = snp->snp->Shutdown ( snp->snp ) ) != 0 ) ) {
        rc = -EEFI ( efirc );
        DBGC ( device, "SNP %s could not shut down: %s\n",
               efi_handle_name ( device ), strerror ( rc ) );
        goto err_shutdown;
    }

    /* Populate network device parameters */
    if ( mode->HwAddressSize != netdev->ll_protocol->hw_addr_len ) {
        DBGC ( device, "SNP %s has invalid hardware address length "
               "%d\n", efi_handle_name ( device ), mode->HwAddressSize);
        rc = -ENOTSUP;
        goto err_hw_addr_len;
    }
    memcpy ( netdev->hw_addr, &mode->PermanentAddress,
             netdev->ll_protocol->hw_addr_len );
    if ( mode->HwAddressSize != netdev->ll_protocol->ll_addr_len ) {
        DBGC ( device, "SNP %s has invalid link-layer address length "
               "%d\n", efi_handle_name ( device ), mode->HwAddressSize);
        rc = -ENOTSUP;
        goto err_ll_addr_len;
    }
    memcpy ( netdev->ll_addr, &mode->CurrentAddress,
             netdev->ll_protocol->ll_addr_len );
    snp->mtu = ( snp->snp->Mode->MaxPacketSize +
                 snp->snp->Mode->MediaHeaderSize );

    /* Register network device */
    if ( ( rc = register_netdev ( netdev ) ) != 0 )
        goto err_register_netdev;
    DBGC ( device, "SNP %s registered as %s\n",
           efi_handle_name ( device ), netdev->name );

    /* Set initial link state */
    if ( snp->snp->Mode->MediaPresentSupported ) {
        snpnet_check_link ( netdev );
    } else {
        netdev_link_up ( netdev );
    }

    return 0;

    unregister_netdev ( netdev );
err_register_netdev:
err_ll_addr_len:
err_hw_addr_len:
err_shutdown:
err_start:
    list_del ( &snp->dev.siblings );
    netdev_nullify ( netdev );
    netdev_put ( netdev );
err_alloc:
    bs->CloseProtocol ( device, &efi_simple_network_protocol_guid,
                        efi_image_handle, device );
err_open_protocol:
    return rc;
}
Exemplo n.º 9
0
Arquivo: nii.c Projeto: baloo/ipxe
/**
 * Attach driver to device
 *
 * @v efidev		EFI device
 * @ret rc		Return status code
 */
int nii_start ( struct efi_device *efidev ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	EFI_HANDLE device = efidev->device;
	struct net_device *netdev;
	struct nii_nic *nii;
	void *interface;
	EFI_STATUS efirc;
	int rc;

	/* Allocate and initialise structure */
	netdev = alloc_netdev ( sizeof ( *nii ) );
	if ( ! netdev ) {
		rc = -ENOMEM;
		goto err_alloc;
	}
	netdev_init ( netdev, &nii_operations );
	nii = netdev->priv;
	nii->efidev = efidev;
	netdev->ll_broadcast = nii->broadcast;
	efidev_set_drvdata ( efidev, netdev );

	/* Populate underlying device information */
	efi_device_info ( device, "NII", &nii->dev );
	nii->dev.driver_name = "NII";
	nii->dev.parent = &efidev->dev;
	list_add ( &nii->dev.siblings, &efidev->dev.children );
	INIT_LIST_HEAD ( &nii->dev.children );
	netdev->dev = &nii->dev;

	/* Open NII protocol */
	if ( ( efirc = bs->OpenProtocol ( device, &efi_nii31_protocol_guid,
					  &interface, efi_image_handle, device,
					  ( EFI_OPEN_PROTOCOL_BY_DRIVER |
					    EFI_OPEN_PROTOCOL_EXCLUSIVE )))!=0){
		rc = -EEFI ( efirc );
		DBGC ( nii, "NII %s cannot open NII protocol: %s\n",
		       nii->dev.name, strerror ( rc ) );
		DBGC_EFI_OPENERS ( device, device, &efi_nii31_protocol_guid );
		goto err_open_protocol;
	}
	nii->nii = interface;

	/* Locate UNDI and entry point */
	nii->undi = ( ( void * ) ( intptr_t ) nii->nii->Id );
	if ( ! nii->undi ) {
		DBGC ( nii, "NII %s has no UNDI\n", nii->dev.name );
		rc = -ENODEV;
		goto err_no_undi;
	}
	if ( nii->undi->Implementation & PXE_ROMID_IMP_HW_UNDI ) {
		DBGC ( nii, "NII %s is a mythical hardware UNDI\n",
		       nii->dev.name );
		rc = -ENOTSUP;
		goto err_hw_undi;
	}
	if ( nii->undi->Implementation & PXE_ROMID_IMP_SW_VIRT_ADDR ) {
		nii->issue = ( ( void * ) ( intptr_t ) nii->undi->EntryPoint );
	} else {
		nii->issue = ( ( ( void * ) nii->undi ) +
			       nii->undi->EntryPoint );
	}
	DBGC ( nii, "NII %s using UNDI v%x.%x at %p entry %p\n", nii->dev.name,
	       nii->nii->MajorVer, nii->nii->MinorVer, nii->undi, nii->issue );

	/* Open PCI I/O protocols and locate BARs */
	if ( ( rc = nii_pci_open ( nii ) ) != 0 )
		goto err_pci_open;

	/* Start UNDI */
	if ( ( rc = nii_start_undi ( nii ) ) != 0 )
		goto err_start_undi;

	/* Get initialisation information */
	if ( ( rc = nii_get_init_info ( nii, netdev ) ) != 0 )
		goto err_get_init_info;

	/* Get MAC addresses */
	if ( ( rc = nii_get_station_address ( nii, netdev ) ) != 0 )
		goto err_get_station_address;

	/* Register network device */
	if ( ( rc = register_netdev ( netdev ) ) != 0 )
		goto err_register_netdev;
	DBGC ( nii, "NII %s registered as %s for %p %s\n", nii->dev.name,
	       netdev->name, device, efi_handle_name ( device ) );

	/* Set initial link state (if media detection is not supported) */
	if ( ! nii->media )
		netdev_link_up ( netdev );

	return 0;

	unregister_netdev ( netdev );
 err_register_netdev:
 err_get_station_address:
 err_get_init_info:
	nii_stop_undi ( nii );
 err_start_undi:
	nii_pci_close ( nii );
 err_pci_open:
 err_hw_undi:
 err_no_undi:
	bs->CloseProtocol ( device, &efi_nii31_protocol_guid,
			    efi_image_handle, device );
 err_open_protocol:
	list_del ( &nii->dev.siblings );
	netdev_nullify ( netdev );
	netdev_put ( netdev );
 err_alloc:
	return rc;
}
Exemplo n.º 10
0
Arquivo: nii.c Projeto: baloo/ipxe
/**
 * Close PCI I/O protocol
 *
 * @v nii		NII NIC
 * @ret rc		Return status code
 */
static void nii_pci_close ( struct nii_nic *nii ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;

	bs->CloseProtocol ( nii->pci_device, &efi_pci_io_protocol_guid,
			    efi_image_handle, nii->efidev->device );
}
Exemplo n.º 11
0
Arquivo: nii.c Projeto: baloo/ipxe
/**
 * Open PCI I/O protocol and identify BARs
 *
 * @v nii		NII NIC
 * @ret rc		Return status code
 */
static int nii_pci_open ( struct nii_nic *nii ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	EFI_HANDLE device = nii->efidev->device;
	EFI_HANDLE pci_device;
	union {
		EFI_PCI_IO_PROTOCOL *pci_io;
		void *interface;
	} pci_io;
	union {
		EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *acpi;
		void *resource;
	} desc;
	unsigned int bar;
	EFI_STATUS efirc;
	int rc;

	/* Locate PCI I/O protocol */
	if ( ( rc = efi_locate_device ( device, &efi_pci_io_protocol_guid,
					&pci_device ) ) != 0 ) {
		DBGC ( nii, "NII %s could not locate PCI I/O protocol: %s\n",
		       nii->dev.name, strerror ( rc ) );
		goto err_locate;
	}
	nii->pci_device = pci_device;

	/* Open PCI I/O protocol */
	if ( ( efirc = bs->OpenProtocol ( pci_device, &efi_pci_io_protocol_guid,
					  &pci_io.interface, efi_image_handle,
					  device,
					  EFI_OPEN_PROTOCOL_GET_PROTOCOL ))!=0){
		rc = -EEFI ( efirc );
		DBGC ( nii, "NII %s could not open PCI I/O protocol: %s\n",
		       nii->dev.name, strerror ( rc ) );
		goto err_open;
	}
	nii->pci_io = pci_io.pci_io;

	/* Identify memory and I/O BARs */
	nii->mem_bar = PCI_MAX_BAR;
	nii->io_bar = PCI_MAX_BAR;
	for ( bar = 0 ; bar < PCI_MAX_BAR ; bar++ ) {
		efirc = nii->pci_io->GetBarAttributes ( nii->pci_io, bar, NULL,
							&desc.resource );
		if ( efirc == EFI_UNSUPPORTED ) {
			/* BAR not present; ignore */
			continue;
		}
		if ( efirc != 0 ) {
			rc = -EEFI ( efirc );
			DBGC ( nii, "NII %s could not get BAR %d attributes: "
			       "%s\n", nii->dev.name, bar, strerror ( rc ) );
			goto err_get_bar_attributes;
		}
		if ( desc.acpi->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM ) {
			nii->mem_bar = bar;
		} else if ( desc.acpi->ResType == ACPI_ADDRESS_SPACE_TYPE_IO ) {
			nii->io_bar = bar;
		}
		bs->FreePool ( desc.resource );
	}
	DBGC ( nii, "NII %s has ", nii->dev.name );
	if ( nii->mem_bar < PCI_MAX_BAR ) {
		DBGC ( nii, "memory BAR %d and ", nii->mem_bar );
	} else {
		DBGC ( nii, "no memory BAR and " );
	}
	if ( nii->io_bar < PCI_MAX_BAR ) {
		DBGC ( nii, "I/O BAR %d\n", nii->io_bar );
	} else {
		DBGC ( nii, "no I/O BAR\n" );
	}

	return 0;

 err_get_bar_attributes:
	bs->CloseProtocol ( pci_device, &efi_pci_io_protocol_guid,
			    efi_image_handle, device );
 err_open:
 err_locate:
	return rc;
}
Exemplo n.º 12
-5
/**
 * Locate EFI PCI root bridge I/O protocol
 *
 * @v pci		PCI device
 * @ret handle		EFI PCI root bridge handle
 * @ret root		EFI PCI root bridge I/O protocol, or NULL if not found
 * @ret rc		Return status code
 */
static int efipci_root ( struct pci_device *pci, EFI_HANDLE *handle,
			 EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL **root ) {
	EFI_BOOT_SERVICES *bs = efi_systab->BootServices;
	EFI_HANDLE *handles;
	UINTN num_handles;
	union {
		void *interface;
		EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *root;
	} u;
	EFI_STATUS efirc;
	UINTN i;
	int rc;

	/* Enumerate all handles */
	if ( ( efirc = bs->LocateHandleBuffer ( ByProtocol,
			&efi_pci_root_bridge_io_protocol_guid,
			NULL, &num_handles, &handles ) ) != 0 ) {
		rc = -EEFI ( efirc );
		DBGC ( pci, "EFIPCI " PCI_FMT " cannot locate root bridges: "
		       "%s\n", PCI_ARGS ( pci ), strerror ( rc ) );
		goto err_locate;
	}

	/* Look for matching root bridge I/O protocol */
	for ( i = 0 ; i < num_handles ; i++ ) {
		*handle = handles[i];
		if ( ( efirc = bs->OpenProtocol ( *handle,
				&efi_pci_root_bridge_io_protocol_guid,
				&u.interface, efi_image_handle, *handle,
				EFI_OPEN_PROTOCOL_GET_PROTOCOL ) ) != 0 ) {
			rc = -EEFI ( efirc );
			DBGC ( pci, "EFIPCI " PCI_FMT " cannot open %s: %s\n",
			       PCI_ARGS ( pci ), efi_handle_name ( *handle ),
			       strerror ( rc ) );
			continue;
		}
		if ( u.root->SegmentNumber == PCI_SEG ( pci->busdevfn ) ) {
			*root = u.root;
			bs->FreePool ( handles );
			return 0;
		}
		bs->CloseProtocol ( *handle,
				    &efi_pci_root_bridge_io_protocol_guid,
				    efi_image_handle, *handle );
	}
	DBGC ( pci, "EFIPCI " PCI_FMT " found no root bridge\n",
	       PCI_ARGS ( pci ) );
	rc = -ENOENT;

	bs->FreePool ( handles );
 err_locate:
	return rc;
}