/**
Wrap the call to PI's EFI_PEI_LOAD_FILE_PPI.
@param This A pointer to EFI_PEI_FV_FILE_LOADER_PPI.
@param FfsHeader The pointer to the file header to be loaded by the Pe/Coff loader.
@param ImageAddress The loaded address of the Image.
@param ImageSize Pointer to the size of the loaded image.
@param EntryPoint Pointer to the entry point of the image.
@retval EFI_SUCCESS The image was loaded successfully.
@retval EFI_OUT_OF_RESOURCE There was not enought memory.
@retval EFI_INVALID_PARAMETER The contents of the FFS file did not contain a valid PE/COFF image that could be loaded.
**/
EFI_STATUS
EFIAPI
FrameworkLoadFile (
IN EFI_PEI_FV_FILE_LOADER_PPI *This,
IN EFI_FFS_FILE_HEADER *FfsHeader,
OUT EFI_PHYSICAL_ADDRESS *ImageAddress,
OUT UINT64 *ImageSize,
OUT EFI_PHYSICAL_ADDRESS *EntryPoint
)
{
EFI_STATUS Status;
EFI_PEI_LOAD_FILE_PPI *PiLoadFile;
UINT32 AuthenticationState;
Status = PeiServicesLocatePpi (
&gEfiPeiLoadFilePpiGuid,
0,
NULL,
(VOID **) &PiLoadFile
);
ASSERT_EFI_ERROR (Status);
return PiLoadFile->LoadFile (
PiLoadFile,
(EFI_PEI_FILE_HANDLE) FfsHeader,
ImageAddress,
ImageSize,
EntryPoint,
&AuthenticationState
);
}
/**
Main entry point to last PEIM.
This function finds DXE Core in the firmware volume and transfer the control to
DXE core.
@param This Entry point for DXE IPL PPI.
@param PeiServices General purpose services available to every PEIM.
@param HobList Address to the Pei HOB list.
@return EFI_SUCCESS DXE core was successfully loaded.
@return EFI_OUT_OF_RESOURCES There are not enough resources to load DXE core.
**/
EFI_STATUS
EFIAPI
DxeLoadCore (
IN CONST EFI_DXE_IPL_PPI *This,
IN EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_HOB_POINTERS HobList
)
{
EFI_STATUS Status;
EFI_FV_FILE_INFO DxeCoreFileInfo;
EFI_PHYSICAL_ADDRESS DxeCoreAddress;
UINT64 DxeCoreSize;
EFI_PHYSICAL_ADDRESS DxeCoreEntryPoint;
EFI_BOOT_MODE BootMode;
EFI_PEI_FILE_HANDLE FileHandle;
EFI_PEI_READ_ONLY_VARIABLE2_PPI *Variable;
EFI_PEI_LOAD_FILE_PPI *LoadFile;
UINTN Instance;
UINT32 AuthenticationState;
UINTN DataSize;
EFI_PEI_S3_RESUME2_PPI *S3Resume;
EFI_PEI_RECOVERY_MODULE_PPI *PeiRecovery;
EFI_MEMORY_TYPE_INFORMATION MemoryData[EfiMaxMemoryType + 1];
//
// if in S3 Resume, restore configure
//
BootMode = GetBootModeHob ();
if (BootMode == BOOT_ON_S3_RESUME) {
Status = PeiServicesLocatePpi (
&gEfiPeiS3Resume2PpiGuid,
0,
NULL,
(VOID **) &S3Resume
);
if (EFI_ERROR (Status)) {
//
// Report Status code that S3Resume PPI can not be found
//
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MAJOR,
(EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_S3_RESUME_PPI_NOT_FOUND)
);
}
ASSERT_EFI_ERROR (Status);
Status = S3Resume->S3RestoreConfig2 (S3Resume);
ASSERT_EFI_ERROR (Status);
} else if (BootMode == BOOT_IN_RECOVERY_MODE) {
REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_RECOVERY_BEGIN));
Status = PeiServicesLocatePpi (
&gEfiPeiRecoveryModulePpiGuid,
0,
NULL,
(VOID **) &PeiRecovery
);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Locate Recovery PPI Failed.(Status = %r)\n", Status));
//
// Report Status code the failure of locating Recovery PPI
//
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MAJOR,
(EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_RECOVERY_PPI_NOT_FOUND)
);
CpuDeadLoop ();
}
REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_CAPSULE_LOAD));
Status = PeiRecovery->LoadRecoveryCapsule (PeiServices, PeiRecovery);
if (EFI_ERROR (Status)) {
DEBUG ((DEBUG_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));
//
// Report Status code that recovery image can not be found
//
REPORT_STATUS_CODE (
EFI_ERROR_CODE | EFI_ERROR_MAJOR,
(EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_EC_NO_RECOVERY_CAPSULE)
);
CpuDeadLoop ();
}
REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_PC_CAPSULE_START));
//
// Now should have a HOB with the DXE core
//
}
if (GetFirstGuidHob ((CONST EFI_GUID *)&gEfiMemoryTypeInformationGuid) == NULL) {
//
// Don't build GuidHob if GuidHob has been installed.
//
Status = PeiServicesLocatePpi (
&gEfiPeiReadOnlyVariable2PpiGuid,
0,
NULL,
(VOID **)&Variable
);
if (!EFI_ERROR (Status)) {
DataSize = sizeof (MemoryData);
Status = Variable->GetVariable (
Variable,
EFI_MEMORY_TYPE_INFORMATION_VARIABLE_NAME,
&gEfiMemoryTypeInformationGuid,
NULL,
&DataSize,
&MemoryData
);
if (!EFI_ERROR (Status) && ValidateMemoryTypeInfoVariable(MemoryData, DataSize)) {
//
// Build the GUID'd HOB for DXE
//
BuildGuidDataHob (
&gEfiMemoryTypeInformationGuid,
MemoryData,
DataSize
);
}
}
}
//
// Look in all the FVs present in PEI and find the DXE Core FileHandle
//
FileHandle = DxeIplFindDxeCore ();
//
// Load the DXE Core from a Firmware Volume.
//
Instance = 0;
do {
Status = PeiServicesLocatePpi (&gEfiPeiLoadFilePpiGuid, Instance++, NULL, (VOID **) &LoadFile);
//
// These must exist an instance of EFI_PEI_LOAD_FILE_PPI to support to load DxeCore file handle successfully.
//
ASSERT_EFI_ERROR (Status);
Status = LoadFile->LoadFile (
LoadFile,
FileHandle,
&DxeCoreAddress,
&DxeCoreSize,
&DxeCoreEntryPoint,
&AuthenticationState
);
} while (EFI_ERROR (Status));
//
// Get the DxeCore File Info from the FileHandle for the DxeCore GUID file name.
//
Status = PeiServicesFfsGetFileInfo (FileHandle, &DxeCoreFileInfo);
ASSERT_EFI_ERROR (Status);
//
// Add HOB for the DXE Core
//
BuildModuleHob (
&DxeCoreFileInfo.FileName,
DxeCoreAddress,
ALIGN_VALUE (DxeCoreSize, EFI_PAGE_SIZE),
DxeCoreEntryPoint
);
//
// Report Status Code EFI_SW_PEI_PC_HANDOFF_TO_NEXT
//
REPORT_STATUS_CODE (EFI_PROGRESS_CODE, (EFI_SOFTWARE_PEI_CORE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT));
DEBUG ((DEBUG_INFO | DEBUG_LOAD, "Loading DXE CORE at 0x%11p EntryPoint=0x%11p\n", (VOID *)(UINTN)DxeCoreAddress, FUNCTION_ENTRY_POINT (DxeCoreEntryPoint)));
//
// Transfer control to the DXE Core
// The hand off state is simply a pointer to the HOB list
//
HandOffToDxeCore (DxeCoreEntryPoint, HobList);
//
// If we get here, then the DXE Core returned. This is an error
// DxeCore should not return.
//
ASSERT (FALSE);
CpuDeadLoop ();
return EFI_OUT_OF_RESOURCES;
}
/**
Routine to load image file for subsequent execution by LoadFile Ppi.
If any LoadFile Ppi is not found, the build-in support function for the PE32+/TE
XIP image format is used.
@param PeiServices - An indirect pointer to the EFI_PEI_SERVICES table published by the PEI Foundation
@param FileHandle - Pointer to the FFS file header of the image.
@param PeimState - The dispatch state of the input PEIM handle.
@param EntryPoint - Pointer to entry point of specified image file for output.
@param AuthenticationState - Pointer to attestation authentication state of image.
@retval EFI_SUCCESS - Image is successfully loaded.
@retval EFI_NOT_FOUND - Fail to locate necessary PPI
@retval Others - Fail to load file.
**/
EFI_STATUS
PeiLoadImage (
IN CONST EFI_PEI_SERVICES **PeiServices,
IN EFI_PEI_FILE_HANDLE FileHandle,
IN UINT8 PeimState,
OUT EFI_PHYSICAL_ADDRESS *EntryPoint,
OUT UINT32 *AuthenticationState
)
{
EFI_STATUS PpiStatus;
EFI_STATUS Status;
UINTN Index;
EFI_PEI_LOAD_FILE_PPI *LoadFile;
EFI_PHYSICAL_ADDRESS ImageAddress;
UINT64 ImageSize;
BOOLEAN IsStrip;
IsStrip = FALSE;
//
// If any instances of PEI_LOAD_FILE_PPI are installed, they are called.
// one at a time, until one reports EFI_SUCCESS.
//
Index = 0;
do {
PpiStatus = PeiServicesLocatePpi (
&gEfiPeiLoadFilePpiGuid,
Index,
NULL,
(VOID **)&LoadFile
);
if (!EFI_ERROR (PpiStatus)) {
Status = LoadFile->LoadFile (
LoadFile,
FileHandle,
&ImageAddress,
&ImageSize,
EntryPoint,
AuthenticationState
);
if (!EFI_ERROR (Status) || Status == EFI_WARN_BUFFER_TOO_SMALL) {
//
// The shadowed PEIM must be relocatable.
//
if (PeimState == PEIM_STATE_REGISITER_FOR_SHADOW) {
IsStrip = RelocationIsStrip ((VOID *) (UINTN) ImageAddress);
ASSERT (!IsStrip);
if (IsStrip) {
return EFI_UNSUPPORTED;
}
}
//
// The image to be started must have the machine type supported by PeiCore.
//
ASSERT (EFI_IMAGE_MACHINE_TYPE_SUPPORTED (PeCoffLoaderGetMachineType ((VOID *) (UINTN) ImageAddress)));
if (!EFI_IMAGE_MACHINE_TYPE_SUPPORTED (PeCoffLoaderGetMachineType ((VOID *) (UINTN) ImageAddress))) {
return EFI_UNSUPPORTED;
}
return EFI_SUCCESS;
}
}
Index++;
} while (!EFI_ERROR (PpiStatus));
return PpiStatus;
}