/**
Initialization for the Serial Io Protocol.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
SerialDxeInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
mSerialIoMode.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
mSerialIoMode.DataBits = (UINT32) PcdGet8 (PcdUartDefaultDataBits);
mSerialIoMode.Parity = (UINT32) PcdGet8 (PcdUartDefaultParity);
mSerialIoMode.StopBits = (UINT32) PcdGet8 (PcdUartDefaultStopBits);
mSerialIoMode.ReceiveFifoDepth = PcdGet16 (PcdUartDefaultReceiveFifoDepth);
mSerialDevicePath.Uart.BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
mSerialDevicePath.Uart.DataBits = PcdGet8 (PcdUartDefaultDataBits);
mSerialDevicePath.Uart.Parity = PcdGet8 (PcdUartDefaultParity);
mSerialDevicePath.Uart.StopBits = PcdGet8 (PcdUartDefaultStopBits);
//
// Issue a reset to initialize the Serial Port
//
Status = mSerialIoTemplate.Reset (&mSerialIoTemplate);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Make a new handle with Serial IO protocol and its device path on it.
//
Status = gBS->InstallMultipleProtocolInterfaces (
&mSerialHandle,
&gEfiSerialIoProtocolGuid, &mSerialIoTemplate,
&gEfiDevicePathProtocolGuid, &mSerialDevicePath,
NULL
);
ASSERT_EFI_ERROR (Status);
return Status;
}
/**
Function for 'sermode' command.
@param[in] ImageHandle Handle to the Image (NULL if Internal).
@param[in] SystemTable Pointer to the System Table (NULL if Internal).
**/
SHELL_STATUS
EFIAPI
ShellCommandRunSerMode (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
SHELL_STATUS ShellStatus;
UINTN Index;
UINTN NoHandles;
EFI_HANDLE *Handles;
EFI_PARITY_TYPE Parity;
EFI_STOP_BITS_TYPE StopBits;
UINTN HandleIdx;
UINTN BaudRate;
UINTN DataBits;
UINTN Value;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
LIST_ENTRY *Package;
CHAR16 *ProblemParam;
CONST CHAR16 *Temp;
UINT64 Intermediate;
ShellStatus = SHELL_SUCCESS;
HandleIdx = 0;
Parity = DefaultParity;
Handles = NULL;
NoHandles = 0;
Index = 0;
Package = NULL;
Status = ShellCommandLineParse (EmptyParamList, &Package, &ProblemParam, TRUE);
if (EFI_ERROR(Status)) {
if (Status == EFI_VOLUME_CORRUPTED && ProblemParam != NULL) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PROBLEM), gShellDebug1HiiHandle, L"sermode", ProblemParam);
FreePool(ProblemParam);
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
ASSERT(FALSE);
}
} else {
if (ShellCommandLineGetCount(Package) < 6 && ShellCommandLineGetCount(Package) > 2) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_TOO_FEW), gShellDebug1HiiHandle, L"sermode");
ShellStatus = SHELL_INVALID_PARAMETER;
} else if (ShellCommandLineGetCount(Package) > 6) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_TOO_MANY), gShellDebug1HiiHandle, L"sermode");
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
Temp = ShellCommandLineGetRawValue(Package, 1);
if (Temp != NULL) {
Status = ShellConvertStringToUint64(Temp, &Intermediate, TRUE, FALSE);
HandleIdx = (UINTN)Intermediate;
Temp = ShellCommandLineGetRawValue(Package, 2);
if (Temp == NULL) {
ShellStatus = DisplaySettings (HandleIdx, TRUE);
goto Done;
}
} else {
ShellStatus = DisplaySettings (0, FALSE);
goto Done;
}
Temp = ShellCommandLineGetRawValue(Package, 2);
if (Temp != NULL) {
BaudRate = ShellStrToUintn(Temp);
} else {
ASSERT(FALSE);
BaudRate = 0;
}
Temp = ShellCommandLineGetRawValue(Package, 3);
if (Temp == NULL || StrLen(Temp)>1) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PARAM_INV), gShellDebug1HiiHandle, L"sermode", Temp);
ShellStatus = SHELL_INVALID_PARAMETER;
} else {
switch(Temp[0]){
case 'd':
case 'D':
Parity = DefaultParity;
break;
case 'n':
case 'N':
Parity = NoParity;
break;
case 'e':
case 'E':
Parity = EvenParity;
break;
case 'o':
case 'O':
Parity = OddParity;
break;
case 'm':
case 'M':
Parity = MarkParity;
break;
case 's':
case 'S':
Parity = SpaceParity;
break;
default:
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PARAM_INV), gShellDebug1HiiHandle, L"sermode", Temp);
ShellStatus = SHELL_INVALID_PARAMETER;
goto Done;
}
}
Temp = ShellCommandLineGetRawValue(Package, 4);
if (Temp != NULL) {
DataBits = ShellStrToUintn(Temp);
} else {
//
// make sure this is some number not in the list below.
//
DataBits = 0;
}
switch (DataBits) {
case 4:
case 7:
case 8:
break;
default:
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PARAM_INV), gShellDebug1HiiHandle, L"sermode", Temp);
ShellStatus = SHELL_INVALID_PARAMETER;
goto Done;
}
Temp = ShellCommandLineGetRawValue(Package, 5);
Value = ShellStrToUintn(Temp);
switch (Value) {
case 0:
StopBits = DefaultStopBits;
break;
case 1:
StopBits = OneStopBit;
break;
case 2:
StopBits = TwoStopBits;
break;
case 15:
StopBits = OneFiveStopBits;
break;
default:
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_GEN_PARAM_INV), gShellDebug1HiiHandle, L"sermode", Temp);
ShellStatus = SHELL_INVALID_PARAMETER;
goto Done;
}
Status = gBS->LocateHandleBuffer(ByProtocol, &gEfiSerialIoProtocolGuid, NULL, &NoHandles, &Handles);
if (EFI_ERROR (Status)) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_NO_FOUND), gShellDebug1HiiHandle, L"sermode");
ShellStatus = SHELL_INVALID_PARAMETER;
goto Done;
}
for (Index = 0; Index < NoHandles; Index++) {
if (ConvertHandleIndexToHandle (HandleIdx) != Handles[Index]) {
continue;
}
Status = gBS->HandleProtocol (Handles[Index], &gEfiSerialIoProtocolGuid, (VOID**)&SerialIo);
if (!EFI_ERROR (Status)) {
Status = SerialIo->SetAttributes (
SerialIo,
(UINT64) BaudRate,
SerialIo->Mode->ReceiveFifoDepth,
SerialIo->Mode->Timeout,
Parity,
(UINT8) DataBits,
StopBits
);
if (EFI_ERROR (Status)) {
if (Status == EFI_INVALID_PARAMETER) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_SET_UNSUPPORTED), gShellDebug1HiiHandle, L"sermode", ConvertHandleToHandleIndex(Handles[Index]));
ShellStatus = SHELL_UNSUPPORTED;
} else if (Status == EFI_DEVICE_ERROR) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_SET_DEV_ERROR), gShellDebug1HiiHandle, L"sermode", ConvertHandleToHandleIndex(Handles[Index]));
ShellStatus = SHELL_ACCESS_DENIED;
} else {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_SET_FAIL), gShellDebug1HiiHandle, L"sermode", ConvertHandleToHandleIndex(Handles[Index]));
ShellStatus = SHELL_ACCESS_DENIED;
}
} else {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_SET_HANDLE), gShellDebug1HiiHandle, ConvertHandleToHandleIndex(Handles[Index]));
}
break;
}
}
}
}
if (ShellStatus == SHELL_SUCCESS && Index == NoHandles) {
ShellPrintHiiEx(-1, -1, NULL, STRING_TOKEN (STR_SERMODE_BAD_HANDLE), gShellDebug1HiiHandle, L"sermode", HandleIdx);
ShellStatus = SHELL_INVALID_PARAMETER;
}
Done:
if (Package != NULL) {
ShellCommandLineFreeVarList (Package);
}
if (Handles != NULL) {
FreePool (Handles);
}
return ShellStatus;
}
/**
Timer handler to poll the key from serial.
@param Event Indicates the event that invoke this function.
@param Context Indicates the calling context.
**/
VOID
EFIAPI
TerminalConInTimerHandler (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_STATUS Status;
TERMINAL_DEV *TerminalDevice;
UINT32 Control;
UINT8 Input;
EFI_SERIAL_IO_MODE *Mode;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
UINTN SerialInTimeOut;
TerminalDevice = (TERMINAL_DEV *) Context;
SerialIo = TerminalDevice->SerialIo;
if (SerialIo == NULL) {
return ;
}
//
// if current timeout value for serial device is not identical with
// the value saved in TERMINAL_DEV structure, then recalculate the
// timeout value again and set serial attribute according to this value.
//
Mode = SerialIo->Mode;
if (Mode->Timeout != TerminalDevice->SerialInTimeOut) {
SerialInTimeOut = 0;
if (Mode->BaudRate != 0) {
//
// According to BAUD rate to calculate the timeout value.
//
SerialInTimeOut = (1 + Mode->DataBits + Mode->StopBits) * 2 * 1000000 / (UINTN) Mode->BaudRate;
}
Status = SerialIo->SetAttributes (
SerialIo,
Mode->BaudRate,
Mode->ReceiveFifoDepth,
(UINT32) SerialInTimeOut,
(EFI_PARITY_TYPE) (Mode->Parity),
(UINT8) Mode->DataBits,
(EFI_STOP_BITS_TYPE) (Mode->StopBits)
);
if (EFI_ERROR (Status)) {
TerminalDevice->SerialInTimeOut = 0;
} else {
TerminalDevice->SerialInTimeOut = SerialInTimeOut;
}
}
//
// Check whether serial buffer is empty.
//
Status = SerialIo->GetControl (SerialIo, &Control);
if ((Control & EFI_SERIAL_INPUT_BUFFER_EMPTY) == 0) {
//
// Fetch all the keys in the serial buffer,
// and insert the byte stream into RawFIFO.
//
while (!IsRawFiFoFull (TerminalDevice)) {
Status = GetOneKeyFromSerial (TerminalDevice->SerialIo, &Input);
if (EFI_ERROR (Status)) {
if (Status == EFI_DEVICE_ERROR) {
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
EFI_ERROR_CODE | EFI_ERROR_MINOR,
(EFI_PERIPHERAL_REMOTE_CONSOLE | EFI_P_EC_INPUT_ERROR),
TerminalDevice->DevicePath
);
}
break;
}
RawFiFoInsertOneKey (TerminalDevice, Input);
}
}
//
// Translate all the raw data in RawFIFO into EFI Key,
// according to different terminal type supported.
//
TranslateRawDataToEfiKey (TerminalDevice);
}
/**
Build a list containing all serial devices.
@retval EFI_SUCCESS The function complete successfully.
@retval EFI_UNSUPPORTED No serial ports present.
**/
EFI_STATUS
LocateSerialIo (
VOID
)
{
UINTN Index;
UINTN Index2;
UINTN NoHandles;
EFI_HANDLE *Handles;
EFI_STATUS Status;
ACPI_HID_DEVICE_PATH *Acpi;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
EFI_DEVICE_PATH_PROTOCOL *Node;
EFI_DEVICE_PATH_PROTOCOL *OutDevicePath;
EFI_DEVICE_PATH_PROTOCOL *InpDevicePath;
EFI_DEVICE_PATH_PROTOCOL *ErrDevicePath;
BM_MENU_ENTRY *NewMenuEntry;
BM_TERMINAL_CONTEXT *NewTerminalContext;
EFI_DEVICE_PATH_PROTOCOL *NewDevicePath;
VENDOR_DEVICE_PATH Vendor;
UINT32 FlowControl;
//
// Get all handles that have SerialIo protocol installed
//
InitializeListHead (&TerminalMenu.Head);
TerminalMenu.MenuNumber = 0;
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiSerialIoProtocolGuid,
NULL,
&NoHandles,
&Handles
);
if (EFI_ERROR (Status)) {
//
// No serial ports present
//
return EFI_UNSUPPORTED;
}
//
// Sort Uart handles array with Acpi->UID from low to high
// then Terminal menu can be built from low Acpi->UID to high Acpi->UID
//
SortedUartHandle (Handles, NoHandles);
for (Index = 0; Index < NoHandles; Index++) {
//
// Check to see whether the handle has DevicePath Protocol installed
//
gBS->HandleProtocol (
Handles[Index],
&gEfiDevicePathProtocolGuid,
(VOID **) &DevicePath
);
Acpi = NULL;
for (Node = DevicePath; !IsDevicePathEnd (Node); Node = NextDevicePathNode (Node)) {
if ((DevicePathType (Node) == MESSAGING_DEVICE_PATH) && (DevicePathSubType (Node) == MSG_UART_DP)) {
break;
}
//
// Acpi points to the node before Uart node
//
Acpi = (ACPI_HID_DEVICE_PATH *) Node;
}
if ((Acpi != NULL) && IsIsaSerialNode (Acpi)) {
NewMenuEntry = BOpt_CreateMenuEntry (BM_TERMINAL_CONTEXT_SELECT);
if (NewMenuEntry == NULL) {
FreePool (Handles);
return EFI_OUT_OF_RESOURCES;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
CopyMem (&NewMenuEntry->OptionNumber, &Acpi->UID, sizeof (UINT32));
NewTerminalContext->DevicePath = DuplicateDevicePath (DevicePath);
//
// BugBug: I have no choice, calling EfiLibStrFromDatahub will hang the system!
// coz' the misc data for each platform is not correct, actually it's the device path stored in
// datahub which is not completed, so a searching for end of device path will enter a
// dead-loop.
//
NewMenuEntry->DisplayString = EfiLibStrFromDatahub (DevicePath);
if (NULL == NewMenuEntry->DisplayString) {
NewMenuEntry->DisplayString = DevicePathToStr (DevicePath);
}
NewMenuEntry->HelpString = NULL;
gBS->HandleProtocol (
Handles[Index],
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo
);
CopyMem (
&NewTerminalContext->BaudRate,
&SerialIo->Mode->BaudRate,
sizeof (UINT64)
);
CopyMem (
&NewTerminalContext->DataBits,
&SerialIo->Mode->DataBits,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->Parity,
&SerialIo->Mode->Parity,
sizeof (UINT8)
);
CopyMem (
&NewTerminalContext->StopBits,
&SerialIo->Mode->StopBits,
sizeof (UINT8)
);
NewTerminalContext->FlowControl = 0;
SerialIo->GetControl(SerialIo, &FlowControl);
if ((FlowControl & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) != 0) {
NewTerminalContext->FlowControl = UART_FLOW_CONTROL_HARDWARE;
}
InsertTailList (&TerminalMenu.Head, &NewMenuEntry->Link);
TerminalMenu.MenuNumber++;
}
}
if (Handles != NULL) {
FreePool (Handles);
}
//
// Get L"ConOut", L"ConIn" and L"ErrOut" from the Var
//
OutDevicePath = EfiLibGetVariable (L"ConOut", &gEfiGlobalVariableGuid);
InpDevicePath = EfiLibGetVariable (L"ConIn", &gEfiGlobalVariableGuid);
ErrDevicePath = EfiLibGetVariable (L"ErrOut", &gEfiGlobalVariableGuid);
if (OutDevicePath != NULL) {
UpdateComAttributeFromVariable (OutDevicePath);
}
if (InpDevicePath != NULL) {
UpdateComAttributeFromVariable (InpDevicePath);
}
if (ErrDevicePath != NULL) {
UpdateComAttributeFromVariable (ErrDevicePath);
}
for (Index = 0; Index < TerminalMenu.MenuNumber; Index++) {
NewMenuEntry = BOpt_GetMenuEntry (&TerminalMenu, Index);
if (NULL == NewMenuEntry) {
return EFI_NOT_FOUND;
}
NewTerminalContext = (BM_TERMINAL_CONTEXT *) NewMenuEntry->VariableContext;
NewTerminalContext->TerminalType = 0;
NewTerminalContext->IsConIn = FALSE;
NewTerminalContext->IsConOut = FALSE;
NewTerminalContext->IsStdErr = FALSE;
Vendor.Header.Type = MESSAGING_DEVICE_PATH;
Vendor.Header.SubType = MSG_VENDOR_DP;
for (Index2 = 0; Index2 < 4; Index2++) {
CopyMem (&Vendor.Guid, &TerminalTypeGuid[Index2], sizeof (EFI_GUID));
SetDevicePathNodeLength (&Vendor.Header, sizeof (VENDOR_DEVICE_PATH));
NewDevicePath = AppendDevicePathNode (
NewTerminalContext->DevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &Vendor
);
if (NewMenuEntry->HelpString != NULL) {
FreePool (NewMenuEntry->HelpString);
}
//
// NewMenuEntry->HelpString = DevicePathToStr (NewDevicePath);
// NewMenuEntry->DisplayString = NewMenuEntry->HelpString;
//
NewMenuEntry->HelpString = NULL;
if (BdsLibMatchDevicePaths (OutDevicePath, NewDevicePath)) {
NewTerminalContext->IsConOut = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
if (BdsLibMatchDevicePaths (InpDevicePath, NewDevicePath)) {
NewTerminalContext->IsConIn = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
if (BdsLibMatchDevicePaths (ErrDevicePath, NewDevicePath)) {
NewTerminalContext->IsStdErr = TRUE;
NewTerminalContext->TerminalType = (UINT8) Index2;
}
}
}
return EFI_SUCCESS;
}
STATIC
EFI_STATUS
EFIAPI
WinNtSerialIoDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Handle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
/*++
Routine Description:
Arguments:
Returns:
None
--*/
// TODO: This - add argument and description to function comment
// TODO: Handle - add argument and description to function comment
// TODO: RemainingDevicePath - add argument and description to function comment
// TODO: EFI_SUCCESS - add return value to function comment
// TODO: EFI_SUCCESS - add return value to function comment
{
EFI_STATUS Status;
EFI_WIN_NT_IO_PROTOCOL *WinNtIo;
WIN_NT_SERIAL_IO_PRIVATE_DATA *Private;
HANDLE NtHandle;
UART_DEVICE_PATH Node;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
UINTN EntryCount;
UINTN Index;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
Private = NULL;
NtHandle = INVALID_HANDLE_VALUE;
//
// Grab the protocols we need
//
Status = gBS->OpenProtocol (
Handle,
&gEfiDevicePathProtocolGuid,
&ParentDevicePath,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
return Status;
}
//
// Grab the IO abstraction we need to get any work done
//
Status = gBS->OpenProtocol (
Handle,
&gEfiWinNtIoProtocolGuid,
&WinNtIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
gBS->CloseProtocol (
Handle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Handle
);
return Status;
}
if (Status == EFI_ALREADY_STARTED) {
if (RemainingDevicePath == NULL) {
return EFI_SUCCESS;
}
//
// Make sure a child handle does not already exist. This driver can only
// produce one child per serial port.
//
Status = gBS->OpenProtocolInformation (
Handle,
&gEfiWinNtIoProtocolGuid,
&OpenInfoBuffer,
&EntryCount
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = EFI_ALREADY_STARTED;
for (Index = 0; Index < EntryCount; Index++) {
if (OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) {
Status = gBS->OpenProtocol (
OpenInfoBuffer[Index].ControllerHandle,
&gEfiSerialIoProtocolGuid,
&SerialIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
EfiCopyMem (&Node, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
Status = SerialIo->SetAttributes (
SerialIo,
Node.BaudRate,
SerialIo->Mode->ReceiveFifoDepth,
SerialIo->Mode->Timeout,
Node.Parity,
Node.DataBits,
Node.StopBits
);
}
break;
}
}
gBS->FreePool (OpenInfoBuffer);
return Status;
}
//
// Check to see if we can access the hardware device. If it's Open in NT we
// will not get access.
//
NtHandle = WinNtIo->WinNtThunk->CreateFile (
WinNtIo->EnvString,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
0,
NULL
);
if (NtHandle == INVALID_HANDLE_VALUE) {
Status = EFI_DEVICE_ERROR;
goto Error;
}
//
// Construct Private data
//
Status = gBS->AllocatePool (
EfiBootServicesData,
sizeof (WIN_NT_SERIAL_IO_PRIVATE_DATA),
&Private
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// This signature must be valid before any member function is called
//
Private->Signature = WIN_NT_SERIAL_IO_PRIVATE_DATA_SIGNATURE;
Private->NtHandle = NtHandle;
Private->ControllerHandle = Handle;
Private->Handle = NULL;
Private->WinNtThunk = WinNtIo->WinNtThunk;
Private->ParentDevicePath = ParentDevicePath;
Private->ControllerNameTable = NULL;
Private->SoftwareLoopbackEnable = FALSE;
Private->HardwareLoopbackEnable = FALSE;
Private->HardwareFlowControl = FALSE;
Private->Fifo.First = 0;
Private->Fifo.Last = 0;
Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE;
EfiLibAddUnicodeString (
LANGUAGE_CODE_ENGLISH,
gWinNtSerialIoComponentName.SupportedLanguages,
&Private->ControllerNameTable,
WinNtIo->EnvString
);
Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION;
Private->SerialIo.Reset = WinNtSerialIoReset;
Private->SerialIo.SetAttributes = WinNtSerialIoSetAttributes;
Private->SerialIo.SetControl = WinNtSerialIoSetControl;
Private->SerialIo.GetControl = WinNtSerialIoGetControl;
Private->SerialIo.Write = WinNtSerialIoWrite;
Private->SerialIo.Read = WinNtSerialIoRead;
Private->SerialIo.Mode = &Private->SerialIoMode;
if (RemainingDevicePath != NULL) {
//
// Match the configuration of the RemainingDevicePath. IsHandleSupported()
// already checked to make sure the RemainingDevicePath contains settings
// that we can support.
//
EfiCopyMem (&Private->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
} else {
//
// Build the device path by appending the UART node to the ParentDevicePath
// from the WinNtIo handle. The Uart setings are zero here, since
// SetAttribute() will update them to match the default setings.
//
EfiZeroMem (&Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
Private->UartDevicePath.Header.Type = MESSAGING_DEVICE_PATH;
Private->UartDevicePath.Header.SubType = MSG_UART_DP;
SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath, sizeof (UART_DEVICE_PATH));
}
//
// Build the device path by appending the UART node to the ParentDevicePath
// from the WinNtIo handle. The Uart setings are zero here, since
// SetAttribute() will update them to match the current setings.
//
Private->DevicePath = EfiAppendDevicePathNode (
ParentDevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
);
if (Private->DevicePath == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
//
// Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults.
//
Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK;
Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT;
Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate;
Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits;
Private->SerialIoMode.Parity = Private->UartDevicePath.Parity;
Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits;
//
// Issue a reset to initialize the COM port
//
Status = Private->SerialIo.Reset (&Private->SerialIo);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// Create new child handle
//
Status = gBS->InstallMultipleProtocolInterfaces (
&Private->Handle,
&gEfiSerialIoProtocolGuid,
&Private->SerialIo,
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
NULL
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// Open For Child Device
//
Status = gBS->OpenProtocol (
Handle,
&gEfiWinNtIoProtocolGuid,
&WinNtIo,
This->DriverBindingHandle,
Private->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
goto Error;
}
return EFI_SUCCESS;
Error:
//
// Use the Stop() function to free all resources allocated in Start()
//
if (Private != NULL) {
if (Private->Handle != NULL) {
This->Stop (This, Handle, 1, &Private->Handle);
} else {
if (NtHandle != INVALID_HANDLE_VALUE) {
Private->WinNtThunk->CloseHandle (NtHandle);
}
if (Private->DevicePath != NULL) {
gBS->FreePool (Private->DevicePath);
}
EfiLibFreeUnicodeStringTable (Private->ControllerNameTable);
gBS->FreePool (Private);
}
}
This->Stop (This, Handle, 0, NULL);
return Status;
}
EFI_STATUS
EFIAPI
WinNtSerialIoDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Handle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
/*++
Routine Description:
Arguments:
Returns:
None
--*/
// TODO: This - add argument and description to function comment
// TODO: Handle - add argument and description to function comment
// TODO: RemainingDevicePath - add argument and description to function comment
// TODO: EFI_SUCCESS - add return value to function comment
// TODO: EFI_SUCCESS - add return value to function comment
{
EFI_STATUS Status;
EFI_WIN_NT_IO_PROTOCOL *WinNtIo;
WIN_NT_SERIAL_IO_PRIVATE_DATA *Private;
HANDLE NtHandle;
UART_DEVICE_PATH UartNode;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
UINTN EntryCount;
UINTN Index;
EFI_SERIAL_IO_PROTOCOL *SerialIo;
UART_DEVICE_PATH *Uart;
UINT32 FlowControlMap;
UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;
UINT32 Control;
Private = NULL;
NtHandle = INVALID_HANDLE_VALUE;
//
// Get the Parent Device Path
//
Status = gBS->OpenProtocol (
Handle,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
return Status;
}
//
// Grab the IO abstraction we need to get any work done
//
Status = gBS->OpenProtocol (
Handle,
&gEfiWinNtIoProtocolGuid,
(VOID **) &WinNtIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
gBS->CloseProtocol (
Handle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Handle
);
return Status;
}
if (Status == EFI_ALREADY_STARTED) {
if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {
//
// If RemainingDevicePath is NULL or is the End of Device Path Node
//
return EFI_SUCCESS;
}
//
// Make sure a child handle does not already exist. This driver can only
// produce one child per serial port.
//
Status = gBS->OpenProtocolInformation (
Handle,
&gEfiWinNtIoProtocolGuid,
&OpenInfoBuffer,
&EntryCount
);
if (EFI_ERROR (Status)) {
return Status;
}
Status = EFI_ALREADY_STARTED;
for (Index = 0; Index < EntryCount; Index++) {
if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {
Status = gBS->OpenProtocol (
OpenInfoBuffer[Index].ControllerHandle,
&gEfiSerialIoProtocolGuid,
(VOID **) &SerialIo,
This->DriverBindingHandle,
Handle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
Uart = (UART_DEVICE_PATH *) RemainingDevicePath;
Status = SerialIo->SetAttributes (
SerialIo,
Uart->BaudRate,
SerialIo->Mode->ReceiveFifoDepth,
SerialIo->Mode->Timeout,
(EFI_PARITY_TYPE) Uart->Parity,
Uart->DataBits,
(EFI_STOP_BITS_TYPE) Uart->StopBits
);
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);
if (!EFI_ERROR (Status) && IsUartFlowControlNode (FlowControl)) {
Status = SerialIo->GetControl (SerialIo, &Control);
if (!EFI_ERROR (Status)) {
if (FlowControl->FlowControlMap == UART_FLOW_CONTROL_HARDWARE) {
Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
} else {
Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
}
//
// Clear the bits that are not allowed to pass to SetControl
//
Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE |
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE);
Status = SerialIo->SetControl (SerialIo, Control);
}
}
}
break;
}
}
FreePool (OpenInfoBuffer);
return Status;
}
FlowControl = NULL;
FlowControlMap = 0;
if (RemainingDevicePath == NULL) {
//
// Build the device path by appending the UART node to the ParentDevicePath
// from the WinNtIo handle. The Uart setings are zero here, since
// SetAttribute() will update them to match the default setings.
//
ZeroMem (&UartNode, sizeof (UART_DEVICE_PATH));
UartNode.Header.Type = MESSAGING_DEVICE_PATH;
UartNode.Header.SubType = MSG_UART_DP;
SetDevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) &UartNode, sizeof (UART_DEVICE_PATH));
} else if (!IsDevicePathEnd (RemainingDevicePath)) {
//
// If RemainingDevicePath isn't the End of Device Path Node,
// only scan the specified device by RemainingDevicePath
//
//
// Match the configuration of the RemainingDevicePath. IsHandleSupported()
// already checked to make sure the RemainingDevicePath contains settings
// that we can support.
//
CopyMem (&UartNode, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (RemainingDevicePath);
if (IsUartFlowControlNode (FlowControl)) {
FlowControlMap = FlowControl->FlowControlMap;
} else {
FlowControl = NULL;
}
} else {
//
// If RemainingDevicePath is the End of Device Path Node,
// skip enumerate any device and return EFI_SUCESSS
//
return EFI_SUCCESS;
}
//
// Check to see if we can access the hardware device. If it's Open in NT we
// will not get access.
//
NtHandle = WinNtIo->WinNtThunk->CreateFile (
WinNtIo->EnvString,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
0,
NULL
);
if (NtHandle == INVALID_HANDLE_VALUE) {
Status = EFI_DEVICE_ERROR;
goto Error;
}
//
// Construct Private data
//
Private = AllocatePool (sizeof (WIN_NT_SERIAL_IO_PRIVATE_DATA));
if (Private == NULL) {
goto Error;
}
//
// This signature must be valid before any member function is called
//
Private->Signature = WIN_NT_SERIAL_IO_PRIVATE_DATA_SIGNATURE;
Private->NtHandle = NtHandle;
Private->ControllerHandle = Handle;
Private->Handle = NULL;
Private->WinNtThunk = WinNtIo->WinNtThunk;
Private->ParentDevicePath = ParentDevicePath;
Private->ControllerNameTable = NULL;
Private->SoftwareLoopbackEnable = FALSE;
Private->HardwareLoopbackEnable = FALSE;
Private->HardwareFlowControl = (BOOLEAN) (FlowControlMap == UART_FLOW_CONTROL_HARDWARE);
Private->Fifo.First = 0;
Private->Fifo.Last = 0;
Private->Fifo.Surplus = SERIAL_MAX_BUFFER_SIZE;
CopyMem (&Private->UartDevicePath, &UartNode, sizeof (UART_DEVICE_PATH));
AddUnicodeString2 (
"eng",
gWinNtSerialIoComponentName.SupportedLanguages,
&Private->ControllerNameTable,
WinNtIo->EnvString,
TRUE
);
AddUnicodeString2 (
"en",
gWinNtSerialIoComponentName2.SupportedLanguages,
&Private->ControllerNameTable,
WinNtIo->EnvString,
FALSE
);
Private->SerialIo.Revision = SERIAL_IO_INTERFACE_REVISION;
Private->SerialIo.Reset = WinNtSerialIoReset;
Private->SerialIo.SetAttributes = WinNtSerialIoSetAttributes;
Private->SerialIo.SetControl = WinNtSerialIoSetControl;
Private->SerialIo.GetControl = WinNtSerialIoGetControl;
Private->SerialIo.Write = WinNtSerialIoWrite;
Private->SerialIo.Read = WinNtSerialIoRead;
Private->SerialIo.Mode = &Private->SerialIoMode;
//
// Build the device path by appending the UART node to the ParentDevicePath
// from the WinNtIo handle. The Uart setings are zero here, since
// SetAttribute() will update them to match the current setings.
//
Private->DevicePath = AppendDevicePathNode (
ParentDevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &Private->UartDevicePath
);
//
// Only produce the FlowControl node when remaining device path has it
//
if (FlowControl != NULL) {
TempDevicePath = Private->DevicePath;
if (TempDevicePath != NULL) {
Private->DevicePath = AppendDevicePathNode (
TempDevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) FlowControl
);
FreePool (TempDevicePath);
}
}
if (Private->DevicePath == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
//
// Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults.
//
Private->SerialIoMode.ControlMask = SERIAL_CONTROL_MASK;
Private->SerialIoMode.Timeout = SERIAL_TIMEOUT_DEFAULT;
Private->SerialIoMode.BaudRate = Private->UartDevicePath.BaudRate;
Private->SerialIoMode.ReceiveFifoDepth = SERIAL_FIFO_DEFAULT;
Private->SerialIoMode.DataBits = Private->UartDevicePath.DataBits;
Private->SerialIoMode.Parity = Private->UartDevicePath.Parity;
Private->SerialIoMode.StopBits = Private->UartDevicePath.StopBits;
//
// Issue a reset to initialize the COM port
//
Status = Private->SerialIo.Reset (&Private->SerialIo);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// Create new child handle
//
Status = gBS->InstallMultipleProtocolInterfaces (
&Private->Handle,
&gEfiSerialIoProtocolGuid,
&Private->SerialIo,
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
NULL
);
if (EFI_ERROR (Status)) {
goto Error;
}
//
// Open For Child Device
//
Status = gBS->OpenProtocol (
Handle,
&gEfiWinNtIoProtocolGuid,
(VOID **) &WinNtIo,
This->DriverBindingHandle,
Private->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
if (EFI_ERROR (Status)) {
goto Error;
}
return EFI_SUCCESS;
Error:
//
// Use the Stop() function to free all resources allocated in Start()
//
if (Private != NULL) {
if (Private->Handle != NULL) {
This->Stop (This, Handle, 1, &Private->Handle);
} else {
if (NtHandle != INVALID_HANDLE_VALUE) {
Private->WinNtThunk->CloseHandle (NtHandle);
}
if (Private->DevicePath != NULL) {
FreePool (Private->DevicePath);
}
FreeUnicodeStringTable (Private->ControllerNameTable);
FreePool (Private);
}
}
This->Stop (This, Handle, 0, NULL);
return Status;
}