void WEBINTERFACE_CLASS::WebServer()
{
// Routing Table
server.on("/wifisetup.html", handleWifi);
server.on("/scan.json",handleScan);
server.on("/", handleWifi);
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}
void webServerSetup() {
webServer.on("/status.json", handleStatus);
webServer.serveStatic("/config.json", SPIFFS, "/config.json");
webServer.serveStatic("/", SPIFFS, "/public/index.html");
webServer.serveStatic("/assets/brewMonitor.js", SPIFFS, "/public/assets/brewMonitor.js");
webServer.onNotFound(handleNotFound);
webServer.begin();
}
void WifiServerinit(void){
if (MDNS.begin(host)) {
MDNS.addService("http", "tcp", 80);
DBG_OUTPUT_PORT.println("MDNS responder started");
DBG_OUTPUT_PORT.print("You can now connect to http://");
DBG_OUTPUT_PORT.print(host);
DBG_OUTPUT_PORT.println(".local");
}
// uri,HTTPメソッド,そのメソッドに対応する関数を指定する
server.on("/list", HTTP_GET, printDirectory);
server.on("/edit", HTTP_DELETE, handleDelete);
server.on("/edit", HTTP_PUT, handleCreate);
server.on("/edit", HTTP_POST, [](){ returnOK(); });
server.onNotFound(handleNotFound); // ハンドラが割り当てられていない場合に呼び出す関数の設定
server.onFileUpload(handleFileUpload); // ファイルアップロード
server.begin();
DBG_OUTPUT_PORT.println("HTTP server started");
}
void setup() {
memset(voltsChr,0,sizeof(voltsChr));
memset(amps0Chr,0,sizeof(amps0Chr));
memset(amps1Chr,0,sizeof(amps1Chr));
memset(tmpChr,0,sizeof(tmpChr));
// if the program crashed, skip things that might make it crash
String rebootMsg = ESP.getResetReason();
if (rebootMsg=="Exception") safeMode=true;
else if (rebootMsg=="Hardware Watchdog") safeMode=true;
else if (rebootMsg=="Unknown") safeMode=true;
else if (rebootMsg=="Software Watchdog") safeMode=true;
if (sw1>=0) {
pinMode(sw1, OUTPUT);
}
if (sw2>=0) {
pinMode(sw2, OUTPUT);
}
if (sw3>=0) {
pinMode(sw3, OUTPUT);
}
if (sw4>=0) {
pinMode(sw4, OUTPUT);
}
// "mount" the filesystem
bool success = SPIFFS.begin();
if (!success) SPIFFS.format();
if (!safeMode) fsConfig(); // read node config from FS
#ifdef _TRAILER
wifiMulti.addAP("DXtrailer", "2317239216");
#else
wifiMulti.addAP("Tell my WiFi I love her", "2317239216");
#endif
int wifiConnect = 240;
while ((wifiMulti.run() != WL_CONNECTED) && (wifiConnect-- > 0)) { // spend 2 minutes trying to connect to wifi
// connecting to wifi
delay(1000);
}
if (wifiMulti.run() != WL_CONNECTED ) { // still not connected? reboot!
ESP.reset();
delay(5000);
}
if (hasHostname) { // valid config found on FS, set network name
WiFi.hostname(String(nodename)); // set network hostname
ArduinoOTA.setHostname(nodename); // OTA hostname defaults to esp8266-[ChipID]
MDNS.begin(nodename); // set mDNS hostname
}
WiFi.macAddress(mac); // get esp mac address, store it in memory, build fw update url
sprintf(macStr,"%x%x%x%x%x%x", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
sprintf(theURL,"/iotfw?mac=%s", macStr);
// request latest config from web api
if (!safeMode) getConfig();
// check web api for new firmware
if (!safeMode) httpUpdater();
// start UDP for ntp client
udp.begin(localPort);
updateNTP();
setSyncProvider(getNtptime); // use NTP to get current time
setSyncInterval(600); // refresh clock every 10 min
#ifndef _MINI
// start the webserver
httpd.onNotFound(handleNotFound);
httpd.begin();
// Add service to MDNS-SD
MDNS.addService("http", "tcp", 80);
#endif
// start websockets server
webSocket.begin();
webSocket.onEvent(webSocketEvent);
// setup other things
setupOTA();
setupMQTT();
// setup i2c if configured, basic sanity checking on configuration
if (hasI2C && iotSDA>=0 && iotSCL>=0 && iotSDA!=iotSCL) {
sprintf(str,"I2C enabled, using SDA=%u SCL=%u", iotSDA, iotSCL);
mqtt.publish(mqttpub, str);
Wire.begin(iotSDA, iotSCL); // from api config file
//Wire.begin(12, 14); // from api config file
i2c_scan();
printConfig();
if (hasRGB) setupRGB();
if (hasIout) setupADS();
if (hasSpeed) setupSpeed();
}
// OWDAT = 4;
if (OWDAT>0) { // setup onewire if data line is using pin 1 or greater
sprintf(str,"Onewire Data OWDAT=%u", OWDAT);
mqtt.publish(mqttpub, str);
oneWire.begin(OWDAT);
if (hasTout) {
ds18b20 = DallasTemperature(&oneWire);
ds18b20.begin(); // start one wire temp probe
}
if (hasTpwr>0) {
pinMode(hasTpwr, OUTPUT); // onewire power pin as output
digitalWrite(hasTpwr, LOW); // ow off
}
}
if (useMQTT) {
String rebootReason = String("Last reboot cause was ") + rebootMsg;
rebootReason.toCharArray(str, rebootReason.length()+1);
mqtt.publish(mqttpub, str);
}
}
void Threm::start() {
_thremContext->isStarted = true;
#ifdef LOG
LOG << "Threm::start" << endl;
LOG << "Free heap " << ESP.getFreeHeap() << endl;
#endif
spiffsOk = SPIFFS.begin();
if (!spiffsOk) {
#ifdef LOG
LOG << "SPIFFS failed" << endl;
#endif
}
ESP8266WebServer* server = _thremContext->getServer();
IThremPlugin* plugin;
PluginMeta* meta;
for (int i = 0; i < _plugins->size(); i++) {
plugin = _plugins->get(i);
bool canEnable = true;
int pluginId = plugin->getUniqueId();
{
String state = getJsonStateFor(pluginId);
yield();
StaticJsonBuffer<JSON_BUFFER_SIZE> jsonBuffer;
JsonObject& root = jsonBuffer.parseObject(state);
if (!root.success()) {
#ifdef LOG
LOG << "Failed to parse config for " << String(plugin->getUniqueId()) << endl;
#endif
}
else {
bool isDisabled = root["off"];
if (isDisabled) {
canEnable = false;
}
}
if (canEnable) {
canEnable = plugin->init(_thremContext, root);
}
}
meta = _pluginMeta->get(i);
meta->isEnabled = canEnable;
#ifdef DEBUG
DEBUG << String(plugin->getName()) << " enabled=" << canEnable << endl;
#endif
_pluginMeta->set(i, meta);
yield();
}
#ifdef DEBUG
DEBUG << "Plugins declared: " << _plugins->size() << endl;
#endif
#ifdef LOG
LOG << getJsonState() << endl;
#endif
#ifdef DEBUG
DEBUG << "default callbacks setup." << endl;
#endif
server->onNotFound([=](){
IThremPlugin*plugin;
PluginMeta* meta;
String uri = server->uri();
for (int i = 0; i < _plugins->size(); i++) {
plugin = _plugins->get(i);
meta = _pluginMeta->get(i);
if (meta->isEnabled) {
if (plugin->handleNotFound(_thremContext, uri)) {
#ifdef LOG
LOG << "NotFound handled by: " << plugin->getName() << endl;
#endif
return;
}
}
}
String message = "File Not Found\n\n";
message += "URI: ";
message += server->uri();
message += "\nMethod: ";
message += (server->method() == HTTP_GET) ? "GET" : "POST";
message += "\nArguments: ";
message += server->args();
message += "\n";
for (uint8_t i = 0; i < server->args(); i++) {
message += " " + server->argName(i) + ": " + server->arg(i) + "\n";
}
server->sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
server->sendHeader("Pragma", "no-cache");
server->sendHeader("Expires", "-1");
server->send(404, "text/plain", message);
});
#ifdef DEBUG
DEBUG << "Starting webserver." << endl;
#endif
server->begin();
#ifdef DEBUG
DEBUG << "Web server started." << endl;
#endif
}
void setup(void){
pinMode(led, OUTPUT);
digitalWrite(led, LED_OFF);
// Note the serial rate - if you don't match it when connecting you'll get garbage.
Serial.begin(115200);
WiFi.begin(ssid, password);
Serial.println("");
// Wait for connection
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.print("Connected to ");
Serial.println(ssid);
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
// This tells the network that you can access the ip address of the esp8266 via 'esp8266.local'
// The first arg is the hostname - '.local' will be appended to it, the second arg is the ip address
if (mdns.begin("esp8266", WiFi.localIP())) {
Serial.println("MDNS responder started");
}
server.on("/", handleRoot);
server.on("/inline", [](){
server.send(200, "text/plain", "this works as well");
});
server.onNotFound(handleNotFound);
server.begin();
Serial.println("HTTP server started");
}