/**
*
* @brief MQTT Paho client read interface
*
* @param n pointer to the Network stucture
* @param buffer buffer to read into
* @param length number of bytes to into
* @timeout timeout_ms timeout
*
* @return Number of by bytes read
*
* \NOMANUAL
*/
int mqtt_read(Network* n, unsigned char* buffer, int length, int timeout_ms) {
int availableBytes;
int count;
Timer t;
EthernetClient* client = (EthernetClient*)n->client;
InitTimer(&t);
countdown_ms(&t, timeout_ms);
// try to do stuff until timer expires
while (!(availableBytes = client->available()) && (!expired(&t)));
count = (length < availableBytes) ? length : availableBytes;
for (int i = 0; i < count; i++) {
buffer[i] = (unsigned char)client->read();
}
return count;
}
void loop()
{
// if there are incoming bytes available
// from the server, read them and print them:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if the server's disconnected, stop the client:
if (!client.connected()) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
// do nothing forevermore:
while(true);
}
}
bool ReadRequestLine()
{
_requestLine[0] = CH_NONE;
uint8_t pos = 0;
char prevChar = CH_NONE;
bool isRead = false;
while (_etClient.available())
{
isRead = true;
// Can not read more - buffer overflow return null.
if (pos == MAX_REQUEST_LINE_LEN - 1)
{ return false; }
char c = _etClient.read();
#ifdef DEBUG
Serial.write(c);
#endif
// Add only chars, exclude CR LF.
if(c != CH_CR && c != CH_LF)
{ _requestLine[pos++] = c; }
// Find end line, after this start Post data.
if(prevChar == CH_CR && c == CH_LF)
{ break; }
prevChar = c;
}
// Add \0.
_requestLine[pos] = CH_NONE;
// Is not read - return false.
if (!isRead)
{ return false; }
return true;
}
void loop() {
// read the analog sensor:
int sensorReading = analogRead(A0);
// convert the data to a String to send it:
String dataString = String(sensorReading);
// you can append multiple readings to this String if your
// pachube feed is set up to handle multiple values:
int otherSensorReading = analogRead(A1);
dataString += ",";
dataString += String(otherSensorReading);
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
// through the loop, then stop the client:
if (!client.connected() && lastConnected) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data:
if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
sendData(dataString);
}
// store the state of the connection for next time through
// the loop:
lastConnected = client.connected();
}
void VirtuinoEthernet_WebServer::run(){
EthernetServer server(serverPort);
EthernetClient client = server.available();
if (client) {
char c;
if (DEBUG) Serial.println(clientConnected);
while (client.connected()) {
if (client.available()) {
c = client.read();
lineBuffer.concat(c);
if (DEBUG) Serial.write(c);
}
if (c == '\n' ) {
int pos = lineBuffer.indexOf("GET /");
if (pos!=-1){ // We have a GET message
if (DEBUG) Serial.println("\n\r LineBuffer="+lineBuffer);
String responce = checkNetworkCommand(lineBuffer.substring(pos+5));
if (DEBUG) Serial.println("\n\r Responce="+responce);
delay(10);
client.flush();
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close");
client.println();
client.println(responce);
lineBuffer="";
break;
} // if pos
lineBuffer="";
} // if c=='\n'
} // if client.available
delay(1);
client.stop(); // close the connection:
if (DEBUG) Serial.println(clientDisconnected);
}
}
static boolean config_handler(TinyWebServer& web_server)
{
web_server.send_error_code(200);
web_server.end_headers();
const char* length_str = web_server.get_header_value("Content-Length");
int length = atoi(length_str);
uint32_t start_time = millis();
StringParse buf;
EthernetClient client = web_server.get_client();
while (buf.length() < length && client.connected() && (millis() - start_time < 30000)) {
if (!client.available()) continue;
buf += client.readString();
}
ParseConfig(buf);
IP_Config.SaveConfig();
main_page(client, F("<font color='green'>IP Config saved</font>"));
return true;
}
String readPage(){
int stringPos = 0; // string index counter
boolean startRead = false;
//read the page, and capture & return everything between '?' and '~'
stringPos = 0;
memset(inString,' ', 200); //clear inString memory
while(true){
if (client.available()) {
char c = client.read();
Serial.print(c);
if (c == '?' ) { //'?' is our begining character
startRead = true; //Ready to start reading the part
}
else if(startRead){
if(c != '~'){ //'~' is our ending character
inString[stringPos] = c;
stringPos ++;
}
else{
//got what we needed, disconnect
startRead = false;
c = 0;
client.stop();
client.flush();
Serial.println("end of poll disconnecting.");
return inString;
}
}
}
}
}
int main(void)
{
/// setup
init();
setup();
/// loop control
for(frame=0; ; ++frame)
{
digitalWrite(13, HIGH);
status.reset();
String new_msg = "Loop #";
new_msg.concat(frame);
#ifdef PERIPHERAL_RTCC
/// check time
if (status.VALID == status.time_valid)
{
GetDatetimeString(rtc.now());
}
/* TODO: port RTC.chipPresent() functionality over to RTClib
if ( RTC.read(tm) )
{
status.time_valid = status.VALID;
}
else
{
if ( RTC.chipPresent() )
{
status.time_valid = status.INVALID;
Serial.println("The DS1307 is stopped. Please set the RTC time.");
Serial.println();
}
else
{
status.time_valid = status.UNINSTALLED;
Serial.println("DS1307 read error! Please check the circuitry.");
Serial.println();
}
}
*/
#endif
/// Check interfaces for received messages
// Serial, direct to the Command Line Interface (CLI)
if(Serial.available() > 0)
{
char buff_console [8];
for(uint8_t len_console = 0x00; Serial.available() > 0; len_console++)
{
buff_console[len_console] = Serial.read();
CLI(buff_console, len_console);
}
}
#ifdef INTERFACE_ASK_RX
// RF (1-wire ASK, aka VirtualWire), print to console
uint8_t buff_rf [VW_MAX_MESSAGE_LEN];
uint8_t len_rf = VW_MAX_MESSAGE_LEN;
if(vw_get_message(buff_rf, &len_rf))
{
#ifdef PERIPHERAL_RTCC
// Prefix received messages with current date-time on console
if (status.VALID == status.time_valid)
{
Serial.print(currentTime);
Serial.write(" | ");
}
#endif //PERIPHERAL_RTCC
Serial.print("RF Received : ");
for(uint8_t i = 0; i < len_rf; i++)
{
Serial.print((char)buff_rf[i]);
}
Serial.println();
}
#endif //INTERFACE_ASK_RX
#ifdef ETHERNET_WEBSERVER
EthernetClient client = server.available();
if (client) {
Serial.println("new http client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected())
{
if (client.available())
{
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank)
{
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 60"); // refresh the page automatically every 60 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
#ifdef PERIPHERAL_RTCC
client.print("green-O-matic RTC Time : ");
client.println(currentTime);
#endif //PERIPHERAL_RTCC
#ifdef INTERFACE_ASK_RX
client.println("Most recently received 433MHz ASK Transmission : ");
#endif //INTERFACE_ASK_RX
client.println("</html>");
break;
}
if (c == '\n')
{
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r')
{
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(5);
// close the connection
client.stop();
Serial.println("client disconnected");
}
#endif //ETHERNET_WEBSERVER
digitalWrite(13, LOW);
delay (LOOP_DELAY);
};
return 0;
}
void api_call_http(byte amsg_server[], char body[]) {
char path[ 30 ];
char host[ 30 ];
strcpy_P(path, msg_server_path);
strcpy_P(host, msg_server_host);
EthernetClient client;
if (!client) {
Serial.println("Ethernet client not available!");
return;
}
Serial.print("HTTP opening connection to ");
Serial.println(host);
/*
if (!ether.dnsLookup(website))
Serial.println("DNS failed");
else
Serial.println("DNS resolution done");
ether.printIp("SRV IP:\t", ether.hisip);
*/
if (!client.connect(amsg_server, pgm_read_word(&msg_server_port))) {
Serial.println("HTTP failed");
return;
}
char d;
//TODO: add serial number, hash message, JSON
String postbuf = body;
String netbuf = "POST ";
netbuf += path;
netbuf += " HTTP/1.0\nHost: ";
netbuf += host;
netbuf += "\nContent-Type: application/x-www-form-urlencoded\nContent-length:";
netbuf += postbuf.length();
netbuf += "\nConnection: close\n\n";
netbuf += postbuf;
//compile error on arduino 1.6.2
//it's just a memory optimization
//postbuf = NULL;
Serial.println("HTTP connected");
Serial.print(netbuf);
char sockbuf[ netbuf.length() +1];
netbuf.toCharArray(sockbuf, netbuf.length()+1);
client.write(sockbuf);
delay(300);
while(client.connected()) {
while(client.available()) {
d = client.read();
if (d == '\n')
Serial.print("\r\n");
else
Serial.print(d);
}
}
client.stop();
Serial.println();
}
void ArduinoConnectEthernet::progMode(EthernetServer server)
{
setConnected(true);
while(isConnected() == true)
{
EthernetClient client = server.available();
if (client)
{
boolean currentLineIsBlank = true;
input = "";
while (client.connected())
{
if (client.available())
{
char c = client.read();
if(reading && c == ' ') reading = false;
if(c == '?')
{
reading = true;
}
if(reading)
{
//opt
//Serial.println(c);
if (c!='?')
{
input += c;
}
}
if(c == '\n' && currentLineIsBlank)
{
break;
}
if (c == '\n')
{
currentLineIsBlank = true;
}
else if (c != '\r')
{
currentLineIsBlank = false;
}
}
}
memset(buffer,'\0',sizeof(buffer));
String httpValue = "arduinoValue: ";
bool readCmd = false;
parseRequest(input);
if(result[0] == "pinMode")
{
if(result[2] == "0")
{
result[1].toCharArray(buffer, 50);
pinMode(atoi(buffer), INPUT);
Serial.println(result[0] + " " + result[1] + " " + result[2]);
}
else if(result[2] == "1")
{
result[1].toCharArray(buffer, 50);
pinMode(atoi(buffer), OUTPUT);
Serial.println("1");
}
else if(result[2] == "2")
{
result[1].toCharArray(buffer, 50);
pinMode(atoi(buffer), INPUT_PULLUP);
Serial.println("1");
}
}
else if(result[0] == "digitalWrite")
{
if(result[2] == "0")
{
result[1].toCharArray(buffer, 50);
digitalWrite(atoi(buffer), LOW);
Serial.println("lw");
}
else if(result[2] == "1")
{
result[1].toCharArray(buffer, 50);
digitalWrite(atoi(buffer), HIGH);
Serial.println("hi");
}
}
else if(result[0] == "digitalRead")
{
result[1].toCharArray(buffer, 50);
Serial.println(digitalRead(atoi(buffer)));
if(digitalRead(atoi(buffer)))
{
httpValue = httpValue + "HIGH";
}
else
{
httpValue = httpValue + "LOW";
}
readCmd = true;
}
else if(result[0] == "analogWrite")
{
result[1].toCharArray(buffer, 50);
char buffer2[50];
result[2].toCharArray(buffer2, 50);
analogWrite(atoi(buffer),atoi(buffer2));
Serial.println("1");
}
else if(result[0] == "analogRead")
{
result[1].toCharArray(buffer, 50);
Serial.println(analogRead(atoi(buffer)));
httpValue = httpValue + analogRead(atoi(buffer));
readCmd = true;
}
else if(result[0] == "continueFlow")
{
setConnected(false);
Serial.println("1");
}
client.println("HTTP/1.1 200 OK");
if(readCmd)
{
client.println(httpValue);
}
client.println("Connection: close");
client.stop();
delay(100);
}
}
}
void networkManage() {
uint16_t size;
if (sendClient.available()) {
// int size = sendClient.read((uint8_t *) buf2, BUFFER_SIZE);
size = readHttpFrame(sendClient);
#ifdef HMAC
if (!isTimeReady()) {
uint16_t endPos = strstrpos_P((char *) buf, DOUBLE_ENDL);
receiveTime((char *) &buf[endPos + 4]);
}
#endif
}
#ifdef HMAC
if (!isTimeReady() && sendClient.status() == SnSR::CLOSED && (lastFailTime == 0 || millis() - lastFailTime > dateFailRetryWait)) {
if (sendClient.connect(NotifyDstIp, notifyDstPort)) {
int len = clientBuildTimeQuery((char *) buf);
sendClient.write(buf, len);
} else {
lastFailTime = millis();
sendClient.stop();
}
}
#endif
if (!sendClient.connected()) {
sendClient.stop();
}
if (notification != 0 && sendClient.status() == SnSR::CLOSED) {
// there is a notif and we are not handling another one
if (lastFailTime == 0 || millis() - lastFailTime > notifFailRetryWait) {
if (sendClient.connect(NotifyDstIp, notifyDstPort)) {
int len = clientBuildNextQuery((char *) buf);
sendClient.write(buf, len);
} else {
lastFailTime = millis();
sendClient.stop();
}
}
}
EthernetClient client = server.available();
if (client) {
while (client.connected()) {
if (client.available()) {
size = readHttpFrame(client);
if (size > 0) {
buf[size] = 0;
size = handleWebRequest((char *) buf, 0, size);
buf[size] = 0;
client.println((const char *) buf);
}
delay(1);
client.stop();
}
}
}
if (needReboot) {
resetFunc();
}
}
bool gatewayTransportSend(MyMessage &message)
{
bool ret = true;
char *_ethernetMsg = protocolFormat(message);
setIndication(INDICATION_GW_TX);
_w5100_spi_en(true);
#if defined(MY_CONTROLLER_IP_ADDRESS)
#if defined(MY_USE_UDP)
_ethernetServer.beginPacket(_ethernetControllerIP, MY_PORT);
_ethernetServer.write(_ethernetMsg, strlen(_ethernetMsg));
// returns 1 if the packet was sent successfully
ret = _ethernetServer.endPacket();
#else
EthernetClient client;
#if defined(MY_CONTROLLER_URL_ADDRESS)
if (client.connected() || client.connect(MY_CONTROLLER_URL_ADDRESS, MY_PORT)) {
#else
if (client.connected() || client.connect(_ethernetControllerIP, MY_PORT)) {
#endif
client.write(_ethernetMsg, strlen(_ethernetMsg));
}
else {
// connecting to the server failed!
ret = false;
}
#endif
#else
// Send message to connected clients
#if defined(MY_GATEWAY_ESP8266)
for (uint8_t i = 0; i < ARRAY_SIZE(clients); i++)
{
if (clients[i] && clients[i].connected())
{
clients[i].write((uint8_t*)_ethernetMsg, strlen(_ethernetMsg));
}
}
#else
_ethernetServer.write(_ethernetMsg);
#endif
#endif
_w5100_spi_en(false);
return ret;
}
#if defined(MY_GATEWAY_ESP8266)
bool _readFromClient(uint8_t i) {
while (clients[i].connected() && clients[i].available()) {
char inChar = clients[i].read();
if (inputString[i].idx < MY_GATEWAY_MAX_RECEIVE_LENGTH - 1) {
// if newline then command is complete
if (inChar == '\n' || inChar == '\r') {
// Add string terminator and prepare for the next message
inputString[i].string[inputString[i].idx] = 0;
debug(PSTR("Client %d: %s\n"), i, inputString[i].string);
inputString[i].idx = 0;
if (protocolParse(_ethernetMsg, inputString[i].string)) {
return true;
}
} else {
// add it to the inputString:
inputString[i].string[inputString[i].idx++] = inChar;
}
} else {
// Incoming message too long. Throw away
debug(PSTR("Client %d: Message too long\n"), i);
inputString[i].idx = 0;
// Finished with this client's message. Next loop() we'll see if there's more to read.
break;
}
}
return false;
}
#else
bool _readFromClient() {
while (client.connected() && client.available()) {
char inChar = client.read();
if (inputString.idx < MY_GATEWAY_MAX_RECEIVE_LENGTH - 1) {
// if newline then command is complete
if (inChar == '\n' || inChar == '\r') {
// Add string terminator and prepare for the next message
inputString.string[inputString.idx] = 0;
debug(PSTR("Eth: %s\n"), inputString.string);
inputString.idx = 0;
if (protocolParse(_ethernetMsg, inputString.string)) {
return true;
}
} else {
// add it to the inputString:
inputString.string[inputString.idx++] = inChar;
}
} else {
// Incoming message too long. Throw away
debug(PSTR("Eth: Message too long\n"));
inputString.idx = 0;
// Finished with this client's message. Next loop() we'll see if there's more to read.
break;
}
}
return false;
}
#endif
bool gatewayTransportAvailable()
{
_w5100_spi_en(true);
#if !defined(MY_IP_ADDRESS) && defined(MY_GATEWAY_W5100)
// renew IP address using DHCP
gatewayTransportRenewIP();
#endif
#ifdef MY_USE_UDP
int packet_size = _ethernetServer.parsePacket();
if (packet_size) {
//debug(PSTR("UDP packet available. Size:%d\n"), packet_size);
setIndication(INDICATION_GW_RX);
#if defined(MY_GATEWAY_ESP8266)
_ethernetServer.read(inputString[0].string, MY_GATEWAY_MAX_RECEIVE_LENGTH);
inputString[0].string[packet_size] = 0;
debug(PSTR("UDP packet received: %s\n"), inputString[0].string);
return protocolParse(_ethernetMsg, inputString[0].string);
#else
_ethernetServer.read(inputString.string, MY_GATEWAY_MAX_RECEIVE_LENGTH);
inputString.string[packet_size] = 0;
debug(PSTR("UDP packet received: %s\n"), inputString.string);
_w5100_spi_en(false);
return protocolParse(_ethernetMsg, inputString.string);
#endif
}
#else
#if defined(MY_GATEWAY_ESP8266)
// ESP8266: Go over list of clients and stop any that are no longer connected.
// If the server has a new client connection it will be assigned to a free slot.
bool allSlotsOccupied = true;
for (uint8_t i = 0; i < ARRAY_SIZE(clients); i++) {
if (!clients[i].connected()) {
if (clientsConnected[i]) {
debug(PSTR("Client %d disconnected\n"), i);
clients[i].stop();
}
//check if there are any new clients
if (_ethernetServer.hasClient()) {
clients[i] = _ethernetServer.available();
inputString[i].idx = 0;
debug(PSTR("Client %d connected\n"), i);
gatewayTransportSend(buildGw(_msg, I_GATEWAY_READY).set("Gateway startup complete."));
if (presentation)
presentation();
}
}
bool connected = clients[i].connected();
clientsConnected[i] = connected;
allSlotsOccupied &= connected;
}
if (allSlotsOccupied && _ethernetServer.hasClient()) {
//no free/disconnected spot so reject
debug(PSTR("No free slot available\n"));
EthernetClient c = _ethernetServer.available();
c.stop();
}
// Loop over clients connect and read available data
for (uint8_t i = 0; i < ARRAY_SIZE(clients); i++) {
if (_readFromClient(i)) {
setIndication(INDICATION_GW_RX);
_w5100_spi_en(false);
return true;
}
}
#else
// W5100/ENC module does not have hasClient-method. We can only serve one client at the time.
EthernetClient newclient = _ethernetServer.available();
// if a new client connects make sure to dispose any previous existing sockets
if (newclient) {
if (client != newclient) {
client.stop();
client = newclient;
debug(PSTR("Eth: connect\n"));
_w5100_spi_en(false);
gatewayTransportSend(buildGw(_msg, I_GATEWAY_READY).set("Gateway startup complete."));
_w5100_spi_en(true);
if (presentation)
presentation();
}
}
if (client) {
if (!client.connected()) {
debug(PSTR("Eth: disconnect\n"));
client.stop();
} else {
if (_readFromClient()) {
setIndication(INDICATION_GW_RX);
_w5100_spi_en(false);
return true;
}
}
}
#endif
#endif
_w5100_spi_en(false);
return false;
}
void tcpConnection()
{
if(client)
{
static boolean hello = false;
if(client.connected())
{
if(client.available())
{
if(!hello)
{
Serial.println("client present");
client.println("Hello!");
hello = true;
}
else
{
char s = client.read();
if(!(s == 13 || s == 10))
{
stringbuilder += s;
}
if(s == '\n' && stringbuilder != "")
{
Serial.println(stringbuilder);
Serial.println(Contains(stringbuilder, ","));
if(Contains(stringbuilder, ","))
{
int id = stringbuilder.substring(IndexOf(stringbuilder, ",")).toInt();
client.println(id);
stringbuilder = RemoveFirst(stringbuilder, id + ",");
client.println(stringbuilder);
int cyc = stringbuilder.substring(IndexOf(stringbuilder, ",")).toInt();
client.println(id);
stringbuilder = RemoveFirst(stringbuilder, id + ",");
client.println(stringbuilder);
int inter = stringbuilder.substring(0).toInt();
createTask(id, cyc, inter);
client.print("Created task(");
client.print(id);
client.print(",");
client.print(cyc);
client.print(",");
client.print(inter);
client.println(")");
}
else
{
if(stringbuilder.toInt() >= 0)
{
tone(SPK, stringbuilder.toInt(), 200);
}
}
stringbuilder = "";
}
}
}
}
else
{
Serial.println("client disconnected");
client.stop();
hello = false;
}
}
else
{
client = server.available();
}
}
//GroveStreams state machine
ethernetStatus_t GroveStreams::run(void)
{
ethernetStatus_t ret = NO_STATUS;
const char httpOKText[] = "HTTP/1.1 200 OK";
static char statusBuf[sizeof(httpOKText)];
if ( nError >= MAX_ERROR )
{
Serial << millis() << F(" too many network errors\n");
mcuReset();
}
switch (GS_STATE)
{
case GS_WAIT: //wait for next send
break;
case GS_SEND:
if ( _xmit() == PUT_COMPLETE )
{
_msLastPacket = millis(); //initialize receive timeout
GS_STATE = GS_RECV;
ret = PUT_COMPLETE;
}
else
{
GS_STATE = GS_WAIT;
++connFail;
++nError;
ret = CONNECT_FAILED;
}
break;
case GS_RECV:
{
boolean haveStatus = false;
if(client.connected())
{
uint16_t nChar = client.available();
if (nChar > 0)
{
_msLastPacket = millis();
Serial << _msLastPacket << F(" received packet, len=") << nChar << endl;
char* b = statusBuf;
for (uint16_t i = 0; i < nChar; i++)
{
char ch = client.read();
Serial << _BYTE(ch);
if ( !haveStatus && i < sizeof(statusBuf) )
{
if ( ch == '\r' || i == sizeof(statusBuf) - 1 )
{
haveStatus = true;
*b++ = 0;
if (strncmp(statusBuf, httpOKText, sizeof(httpOKText)) == 0)
{
++httpOK;
nError = 0;
ret = HTTP_OK;
}
else
{
++httpOther;
++nError;
ret = HTTP_OTHER;
Serial << endl << endl << millis() << F(" HTTP STATUS: ") << statusBuf << endl;
}
}
else
{
*b++ = ch;
}
}
}
}
//if too much time has elapsed since the last packet, time out and close the connection from this end
else if (millis() - _msLastPacket >= RECEIVE_TIMEOUT)
{
_msLastPacket = millis();
Serial << endl << _msLastPacket << F(" Recv timeout\n");
client.stop();
if (_ledPin >= 0) digitalWrite(_ledPin, LOW);
GS_STATE = GS_DISCONNECT;
++recvTimeout;
++nError;
ret = TIMEOUT;
}
}
else
{
GS_STATE = GS_DISCONNECT;
ret = DISCONNECTING;
}
break;
}
case GS_DISCONNECT:
// close client end
_msDisconnecting = millis();
Serial << _msDisconnecting << F(" disconnecting\n");
client.stop();
if (_ledPin >= 0) digitalWrite(_ledPin, LOW);
_msDisconnected = millis();
respTime = _msLastPacket - _msPutComplete;
discTime = _msDisconnected - _msDisconnecting;
Serial << _msDisconnected << F(" disconnected\n\n");
GS_STATE = GS_WAIT;
ret = DISCONNECTED;
break;
}
if (ret != NO_STATUS) lastStatus = ret;
return ret;
}
void Mudbus::Run()
{
Runs = 1 + Runs * (Runs < 999);
//****************** Read from socket ****************
EthernetClient client = MbServer.available();
if(client.available())
{
Reads = 1 + Reads * (Reads < 999);
int i = 0;
while(client.available())
{
ByteArray[i] = client.read();
i++;
}
SetFC(ByteArray[7]); //Byte 7 of request is FC
if(!Active)
{
Active = true;
PreviousActivityTime = millis();
#ifdef MbDebug
Serial.println("Mb active");
#endif
}
}
if(millis() > (PreviousActivityTime + 60000))
{
if(Active)
{
Active = false;
#ifdef MbDebug
Serial.println("Mb not active");
#endif
}
}
int Start, WordDataLength, ByteDataLength, CoilDataLength, MessageLength;
//****************** Read Coils **********************
if(FC == MB_FC_READ_COILS)
{
Start = word(ByteArray[8],ByteArray[9]);
CoilDataLength = word(ByteArray[10],ByteArray[11]);
ByteDataLength = CoilDataLength / 8;
if(ByteDataLength * 8 < CoilDataLength) ByteDataLength++;
CoilDataLength = ByteDataLength * 8;
#ifdef MbDebug
Serial.print(" MB_FC_READ_COILS S=");
Serial.print(Start);
Serial.print(" L=");
Serial.println(CoilDataLength);
#endif
ByteArray[5] = ByteDataLength + 3; //Number of bytes after this one.
ByteArray[8] = ByteDataLength; //Number of bytes after this one (or number of bytes of data).
for(int i = 0; i < ByteDataLength ; i++)
{
for(int j = 0; j < 8; j++)
{
bitWrite(ByteArray[9 + i], j, C[Start + i * 8 + j]);
}
}
MessageLength = ByteDataLength + 9;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
//****************** Read Registers ******************
if(FC == MB_FC_READ_REGISTERS)
{
Start = word(ByteArray[8],ByteArray[9]);
WordDataLength = word(ByteArray[10],ByteArray[11]);
ByteDataLength = WordDataLength * 2;
#ifdef MbDebug
Serial.print(" MB_FC_READ_REGISTERS S=");
Serial.print(Start);
Serial.print(" L=");
Serial.println(WordDataLength);
#endif
ByteArray[5] = ByteDataLength + 3; //Number of bytes after this one.
ByteArray[8] = ByteDataLength; //Number of bytes after this one (or number of bytes of data).
for(int i = 0; i < WordDataLength; i++)
{
ByteArray[ 9 + i * 2] = highByte(R[Start + i]);
ByteArray[10 + i * 2] = lowByte(R[Start + i]);
}
MessageLength = ByteDataLength + 9;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
//****************** Write Coil **********************
if(FC == MB_FC_WRITE_COIL)
{
Start = word(ByteArray[8],ByteArray[9]);
C[Start] = word(ByteArray[10],ByteArray[11]) > 0;
#ifdef MbDebug
Serial.print(" MB_FC_WRITE_COIL C");
Serial.print(Start);
Serial.print("=");
Serial.println(C[Start]);
#endif
ByteArray[5] = 2; //Number of bytes after this one.
MessageLength = 8;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
//****************** Write Register ******************
if(FC == MB_FC_WRITE_REGISTER)
{
Start = word(ByteArray[8],ByteArray[9]);
R[Start] = word(ByteArray[10],ByteArray[11]);
#ifdef MbDebug
Serial.print(" MB_FC_WRITE_REGISTER R");
Serial.print(Start);
Serial.print("=");
Serial.println(R[Start]);
#endif
ByteArray[5] = 6; //Number of bytes after this one.
MessageLength = 12;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
//****************** Write Multiple Coils **********************
//Function codes 15 & 16 by Martin Pettersson http://siamect.com
if(FC == MB_FC_WRITE_MULTIPLE_COILS)
{
Start = word(ByteArray[8],ByteArray[9]);
CoilDataLength = word(ByteArray[10],ByteArray[11]);
ByteDataLength = CoilDataLength / 8;
if(ByteDataLength * 8 < CoilDataLength) ByteDataLength++;
CoilDataLength = ByteDataLength * 8;
#ifdef MbDebug
Serial.print(" MB_FC_WRITE_MULTIPLE_COILS S=");
Serial.print(Start);
Serial.print(" L=");
Serial.println(CoilDataLength);
#endif
ByteArray[5] = ByteDataLength + 5; //Number of bytes after this one.
for(int i = 0; i < ByteDataLength ; i++)
{
for(int j = 0; j < 8; j++)
{
C[Start + i * 8 + j] = bitRead( ByteArray[13 + i], j);
}
}
MessageLength = 12;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
//****************** Write Multiple Registers ******************
//Function codes 15 & 16 by Martin Pettersson http://siamect.com
if(FC == MB_FC_WRITE_MULTIPLE_REGISTERS)
{
Start = word(ByteArray[8],ByteArray[9]);
WordDataLength = word(ByteArray[10],ByteArray[11]);
ByteDataLength = WordDataLength * 2;
#ifdef MbDebug
Serial.print(" MB_FC_READ_REGISTERS S=");
Serial.print(Start);
Serial.print(" L=");
Serial.println(WordDataLength);
#endif
ByteArray[5] = ByteDataLength + 3; //Number of bytes after this one.
for(int i = 0; i < WordDataLength; i++)
{
R[Start + i] = word(ByteArray[ 13 + i * 2],ByteArray[14 + i * 2]);
}
MessageLength = 12;
client.write(ByteArray, MessageLength);
Writes = 1 + Writes * (Writes < 999);
FC = MB_FC_NONE;
}
#ifdef MbDebug
Serial.print("Mb runs: ");
Serial.print(Runs);
Serial.print(" reads: ");
Serial.print(Reads);
Serial.print(" writes: ");
Serial.print(Writes);
Serial.println();
#endif
}
bool GetIPAddressData()
{
bool bFindIP = false;
Serial.println("**************[IP]Begin send request**********************");
Serial.println("=>Connecting...");
bool bFail = false;
// If you get a connection, report back via serial:
if (client.connect(serverName, 80) > 0) {
/*
GET /n09230945.asp HTTP/1.1
Host:automation.whatismyip.com
Accept: *//*
*/
Serial.println("=>Connected");
// Make a HTTP request:
client.println("GET /n09230945.asp HTTP/1.1");
client.println("Host:automation.whatismyip.com");
client.println("Accept: */*");
//client.println("Connection: close");
client.println();
}
else {
// If you didn't get a connection to the server:
Serial.println("=>Error: Connection failed. Initialize Ethernet Again.");
InitializeEthernet();
bFail = true;
}
if(!bFail)
{
Serial.println("");
Serial.println("=>Waiting for response...");
for(int i = 0; i < 5; i++)
{
if(client.available())
break;
delay(200); // Wait for the server. 200ms
}
bool bHasData = client.available();
if (bHasData)
Serial.println("=>Output received data");
else
Serial.println("=>Error: Nothing received.(Timeout)");
if(bHasData)
{
/* The received data is like
HTTP/1.1 200 OK
Date: Sun, 14 Aug 2011 10:05:57 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
Content-Length: 14
Content-Type: text/html
Set-Cookie: ASPSESSIONIDCQTCQDBB=KCDOBALDODNOIPGMIHCHDIDE; path=/
Cache-control: private
58.38.54.125
*/
bool bHttpBodyBegin = false;
while(client.available())
{
int length = getline(client, gDataBuffer, DATA_BUFFER_SIZE);
Serial.print(gDataBuffer);
if(length == 2) // This is empty. It means the http header is finished. Next is http body.
{
bHttpBodyBegin = true;
break;
}
}
if(bHttpBodyBegin)
{
Serial.println("=>Begin to get http body...");
// Read the http body
int pos = 0;
while (client.available())
{
if(pos >= (DATA_BUFFER_SIZE - 1))
{
Serial.println();
Serial.println("Warning: The received data is too long. Discard the redundant data.");
break;
}
char c = client.read();
gDataBuffer[pos] = c;
pos++;
Serial.print(c);
}
gDataBuffer[pos] = '\0';
Serial.println("");
Serial.println("=>Parsing the IP address...");
bFindIP = GetIpAddressFromDataBuffer(gDataBuffer, pos, gIPBuffer, IP_BUFFER_SIZE);
if(bFindIP)
{
Serial.print("=>Success: IP address is: ");
Serial.println(gIPBuffer);
}
else
{
Serial.println("=>Error: Fail to get the IP address.");
}
// Close the link every time. Otherwise, the connection can be created only on first time.
// The following request will fail.
client.stop();
}
else
{
Serial.println("=>Error: No http body");
}
}
}
Serial.println("");
Serial.println("[Finish!]");
Serial.println("");
return bFindIP;
}
void setup() {
// Open serial communications and wait for port to open:
Serial.begin(9600);
while (!Serial) {
; // wait for serial port to connect. Needed for Leonardo only
}
// give the ethernet module time to boot up:
delay(1000);
// start the Ethernet connection:
#if defined(WIZ550io_WITH_MACADDRESS)
if (Ethernet.begin() == 0) {
#else
if (Ethernet.begin(mac) == 0) {
#endif
Serial.println("Failed to configure Ethernet using DHCP");
// DHCP failed, so use a fixed IP address:
#if defined(WIZ550io_WITH_MACADDRESS)
Ethernet.begin(ip, dnsip, gw,snip);
#else
Ethernet.begin(mac, ip, dnsip, gw,snip);
#endif
}
}
void loop() {
// read the analog sensor:
int sensorReading = analogRead(A0);
// convert the data to a String to send it:
String dataString = "sensor1,";
dataString += sensorReading;
// you can append multiple readings to this String if your
// pachube feed is set up to handle multiple values:
int otherSensorReading = analogRead(A1);
dataString += "\nsensor2,";
dataString += otherSensorReading;
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
// through the loop, then stop the client:
if (!client.connected() && lastConnected) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
// if you're not connected, and ten seconds have passed since
// your last connection, then connect again and send data:
if(!client.connected() && (millis() - lastConnectionTime > postingInterval)) {
sendData(dataString);
}
// store the state of the connection for next time through
// the loop:
lastConnected = client.connected();
}
void loop() {
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
if(c == '?'){
startRequest = true;
noReq = false;
}else if(c == ' '){
startRequest = false;
}
if(startRequest){
httpReq += c;
}
if(light){
button = "Turn the system off.";
action = "/?OFF";
sense();
}else{
button = "Arm the system.";
action = "/?ON";
motionStart = "";
measurement = "";
}
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
if(noReq){
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
client.println("<head>");
client.println("<link rel='stylesheet' href='//netdna.bootstrapcdn.com/bootstrap/3.1.1/css/bootstrap.min.css'><script type='text/javascript' src='http://code.jquery.com/jquery-2.1.1.min.js'></script><script type='text/javascript'>$.ajax({url: 'http://107.170.57.28/return.php', type: 'get', success: function (response){$('body').html(response)}});</script></head><body></body>");
client.println("</head>");
client.println("</html>");
}else{
client.println();
client.print("{\"sensorLog\": \"");
client.print(sensorLog);
client.print(motionStart);
client.print(measurement);
client.print("\",\"action\": \"" + action + "\"}");
}
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
if(httpReq == "?ON"){
digitalWrite(7, HIGH);
digitalWrite(3, LOW);
sensorLog = ("Calibrating sensor <br /> Done <br /> SENSOR ACTIVE <br /> Motion Detected at: ");
measurement = " sec";
light = true;
}else if(httpReq == "?OFF"){
// digitalWrite(7, LOW);
sensorLog = ("System turned off");
light = false;
}else if(httpReq == "?PLAY"){
play();
}
noReq = true;
Serial.print("HTTPReq: ");
Serial.print(httpReq);
httpReq = "";
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disonnected");
}
}
void loop() {
// Reading temperature or humidity takes about 250 milliseconds!
// Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
int h = dht.readHumidity();
int t = dht.readTemperature();
int mois = analogRead(1);
// check if returns are valid, if they are NaN (not a number) then something went wrong!
if (isnan(t) || isnan(h)) {
Serial.println("Failed to read from DHT");
} else {
Serial.print("Humidity: ");
Serial.print(h);
Serial.print(" %\t");
Serial.print("Temperature: ");
Serial.print(t);
Serial.println(" *C");
}
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
Serial.println("new client");
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: text/html");
client.println("Connection: close"); // the connection will be closed after completion of the response
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<!DOCTYPE HTML>");
client.println("<html>");
// output the value of the DHT-11
client.print("<div id='banner'>");
client.print(h);
client.print(",");
client.print(t);
client.print(",");
client.print(mois);
client.print("</div>");
client.println("</html>");
break;
}
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
}
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
Serial.println("client disonnected");
}
}
bool
Twitter::post_status(const char *message)
{
char *cp;
int i;
timestamp = get_time();
create_nonce();
compute_authorization(message);
/* Post message to twitter. */
EthernetClient http;
if (!http.connect(ip, port))
{
println(PSTR("Could not connect to server"));
return false;
}
http_print(&http, PSTR("POST "));
if (proxy)
{
http_print(&http, PSTR("http://"));
http_print(&http, server);
}
http_print(&http, uri);
http_println(&http, PSTR(" HTTP/1.1"));
http_print(&http, PSTR("Host: "));
http_print(&http, server);
http_newline(&http);
http_println(&http,
PSTR("Content-Type: application/x-www-form-urlencoded"));
http_println(&http, PSTR("Connection: close"));
/* Authorization header. */
http_print(&http, PSTR("Authorization: OAuth oauth_consumer_key=\""));
url_encode_pgm(buffer, consumer_key);
http.write(buffer);
http_print(&http, PSTR("\",oauth_signature_method=\"HMAC-SHA1"));
http_print(&http, PSTR("\",oauth_timestamp=\""));
sprintf(buffer, "%ld", timestamp);
http.write(buffer);
http_print(&http, PSTR("\",oauth_nonce=\""));
hex_encode(buffer, nonce, sizeof(nonce));
http.write(buffer);
http_print(&http, PSTR("\",oauth_version=\"1.0\",oauth_token=\""));
if (access_token_pgm)
url_encode_pgm(buffer, access_token.pgm);
else
url_encode_eeprom(buffer, access_token.eeprom);
http.write(buffer);
http_print(&http, PSTR("\",oauth_signature=\""));
cp = base64_encode(buffer, signature, HASH_LENGTH);
url_encode(cp + 1, buffer);
http.write(cp + 1);
http_println(&http, PSTR("\""));
/* Encode content. */
cp = url_encode(buffer, "status");
*cp++ = '=';
cp = url_encode(cp, message);
int content_length = cp - buffer;
sprintf(cp + 1, "%d", content_length);
http_print(&http, PSTR("Content-Length: "));
http.write(cp + 1);
http_newline(&http);
/* Header-body separator. */
http_newline(&http);
/* And finally content. */
http.write(buffer);
/* Read response status line. */
if (!read_line(&http, buffer, buffer_len) || buffer[0] == '\0')
{
http.stop();
return false;
}
int response_code;
/* HTTP/1.1 200 Success */
for (i = 0; buffer[i] && buffer[i] != ' '; i++)
;
if (buffer[i])
response_code = atoi(buffer + i + 1);
else
response_code = 0;
bool success = (200 <= response_code && response_code < 300);
if (!success)
Serial.println(buffer);
/* Skip header. */
while (true)
{
if (!read_line(&http, buffer, buffer_len))
{
http.stop();
return false;
}
if (buffer[0] == '\0')
break;
/* Update our system basetime from the response `Date'
header. */
process_date_header(buffer);
}
/* Handle content. */
while (http.connected())
{
while (http.available() > 0)
{
uint8_t byte = http.read();
if (!success)
Serial.write(byte);
}
delay(100);
}
http.stop();
if (!success)
println(PSTR(""));
return success;
}
WebClient* NetworkInterfaceWIZ5x00::processPacket () {
WebClient *ret = NULL;
EthernetClient client = server.available ();
if (client) {
DPRINT (F("New client from "));
DPRINTLN (client.remoteIP ());
// An http request ends with a blank line
boolean currentLineIsBlank = true;
ethernetBufferSize = 0;
boolean copy = true;
while (client.connected ()) {
if (client.available ()) {
char c = client.read ();
if (copy) {
if (ethernetBufferSize < sizeof (ethernetBuffer)) {
ethernetBuffer[ethernetBufferSize++] = c;
} else {
DPRINTLN (F("Ethernet buffer overflow"));
break;
}
}
// If you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
if (c == '\n' && currentLineIsBlank) {
webClient.begin (client, (char *) ethernetBuffer);
ret = &webClient;
break;
}
if (c == '\n') {
// See if we got the URL line
if (strncmp_P ((char *) ethernetBuffer, PSTR ("GET "), 4) == 0) {
// Yes, ignore the rest
ethernetBuffer[ethernetBufferSize - 1] = '\0';
copy = false;
} else {
// No, start over
ethernetBufferSize = 0;
}
// you're starting a new line
currentLineIsBlank = true;
} else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
}
}
}
// give the web browser time to receive the data
//delay (500);
// If we are not returning a client, close the connection
if (!ret) {
client.stop ();
DPRINTLN (F("Client disconnected"));
}
}
return ret;
}
/**
* Process HTTP request
*
* @return EthernetClient client
**/
EthernetClient uHTTP::available(){
EthernetClient client;
memset(__uri, 0, sizeof(__uri));
memset(__query, 0, sizeof(__query));
memset(__body, 0, sizeof(__body));
memset(&__head, 0, sizeof(__head));
if(client = EthernetServer::available()){
uint8_t cursor = 0, cr = 0;
char buffer[uHTTP_BUFFER_SIZE] = {0};
bool sub = false;
enum state_t {METHOD, URI, QUERY, PROTO, KEY, VALUE, BODY};
state_t state = METHOD;
enum header_t {START, AUTHORIZATION, CONTENT_TYPE, CONTENT_LENGTH, ORIGIN};
header_t header = START;
while(client.connected() && client.available()){
char c = client.read();
(c == '\r' || c == '\n') ? cr++ : cr = 0;
switch(state){
case METHOD:
if(c == ' '){
if(strncmp_P(buffer, PSTR("OP"), 2) == 0) __method = uHTTP_METHOD_OPTIONS;
else if(strncmp_P(buffer, PSTR("HE"), 2) == 0) __method = uHTTP_METHOD_HEAD;
else if(strncmp_P(buffer, PSTR("PO"), 2) == 0) __method = uHTTP_METHOD_POST;
else if(strncmp_P(buffer, PSTR("PU"), 2) == 0) __method = uHTTP_METHOD_PUT;
else if(strncmp_P(buffer, PSTR("PA"), 2) == 0) __method = uHTTP_METHOD_PATCH;
else if(strncmp_P(buffer, PSTR("DE"), 2) == 0) __method = uHTTP_METHOD_DELETE;
else if(strncmp_P(buffer, PSTR("TR"), 2) == 0) __method = uHTTP_METHOD_TRACE;
else if(strncmp_P(buffer, PSTR("CO"), 2) == 0) __method = uHTTP_METHOD_CONNECT;
else __method = uHTTP_METHOD_GET;
state = URI;
cursor = 0;
}else if(cursor < uHTTP_METHOD_SIZE - 1){
buffer[cursor++] = c;
buffer[cursor] = '\0';
}
break;
case URI:
if(c == ' '){
state = PROTO;
cursor = 0;
}else if(c == '?'){
state = QUERY;
cursor = 0;
}else if(cursor < uHTTP_URI_SIZE - 1){
__uri[cursor++] = c;
__uri[cursor] = '\0';
}
break;
case QUERY:
if(c == ' '){
state = PROTO;
cursor = 0;
}else if(cursor < uHTTP_QUERY_SIZE - 1){
__query[cursor++] = c;
__query[cursor] = '\0';
}
break;
case PROTO:
if(cr == 2){ state = KEY; cursor = 0; }
break;
case KEY:
if (cr == 4){ state = BODY; cursor = 0; }
else if(c == ' '){ state = VALUE; cursor = 0; }
else if(c != ':' && cursor < uHTTP_BUFFER_SIZE){ buffer[cursor++] = c; buffer[cursor] = '\0'; }
break;
case VALUE:
if(cr == 2){
switch(header){
case AUTHORIZATION:
strncpy(__head.auth, buffer, uHTTP_AUTH_SIZE);
break;
case CONTENT_TYPE:
strncpy(__head.type, buffer, uHTTP_TYPE_SIZE);
break;
case ORIGIN:
strncpy(__head.orig, buffer, uHTTP_ORIG_SIZE);
break;
case CONTENT_LENGTH:
__head.length = atoi(buffer);
break;
break;
}
state = KEY; header = START; cursor = 0; sub = false;
}else if(c != '\r' && c!= '\n'){
if(header == START){
if(strncmp_P(buffer, PSTR("Auth"), 4) == 0) header = AUTHORIZATION;
else if(strncmp_P(buffer, PSTR("Content-T"), 9) == 0) header = CONTENT_TYPE;
else if(strncmp_P(buffer, PSTR("Content-L"), 9) == 0) header = CONTENT_LENGTH;
}
// Fill buffer
if(cursor < uHTTP_BUFFER_SIZE - 1){
switch(header){
case AUTHORIZATION:
if(sub){ buffer[cursor++] = c; buffer[cursor] = '\0'; }
else if(c == ' ') sub = true;
break;
case CONTENT_TYPE:
case CONTENT_LENGTH:
buffer[cursor++] = c; buffer[cursor] = '\0';
break;
}
}
}
break;
case BODY:
if(cr == 2 || __head.length == 0) client.flush();
else if(cursor < uHTTP_BODY_SIZE - 1){ __body[cursor++] = c; __body[cursor] = '\0'; }
break;
}
}
}
return client;
}
void pachube_in_out(){
if (minute() < last_connect) last_connect = minute();
if (request_pause){
if ((minute() - last_connect) > interval){
ready_to_update = true;
reading_pachube = false;
request_pause = false;
found_status_200 = false;
found_session_id = false;
found_CSV = false;
Serial.print("Ready to connect: ");
Serial.println(minute());
Serial.print("interval: ");
Serial.println(interval);
}
}
if (ready_to_update){
Serial.println("Connecting...");
if (localClient.connect(remoteServer, 80) > 0) {
// here we assign comma-separated values to 'data', which will update Pachube datastreams
// we use all the analog-in values, but could of course use anything else millis(), digital
// inputs, etc. . i also like to keep track of successful and failed connection
// attempts, sometimes useful for determining whether there are major problems.
sprintf(pachube_data,"%d,%d,%d-%d-%d %d:%d:%d",analogRead(0),analogRead(1), year(),month(),day(),hour(),minute(),second());
content_length = strlen(pachube_data);
Serial.print("GET request to retrieve: ");
Serial.println(pachube_data);
localClient.print("GET /api/");
localClient.print(REMOTE_FEED_ID);
localClient.print(".csv HTTP/1.1\nHost: pachube.com\nX-PachubeApiKey: ");
localClient.print(PACHUBE_API_KEY);
localClient.print("\nUser-Agent: Arduino (Pachube In Out v1.1)");
localClient.println("\n");
//Serial.println("finished GET now PUT, to update");
localClient.print("PUT /api/");
localClient.print(SHARE_FEED_ID);
localClient.print(".csv HTTP/1.1\nHost: pachube.com\nX-PachubeApiKey: ");
localClient.print(PACHUBE_API_KEY);
localClient.print("\nUser-Agent: Arduino (Pachube In Out v1.1)");
localClient.print("\nContent-Type: text/csv\nContent-Length: ");
localClient.print(content_length);
localClient.print("\nConnection: close\n\n");
localClient.print(pachube_data);
localClient.print("\n");
ready_to_update = false;
reading_pachube = true;
request_pause = false;
interval = UPDATE_INTERVAL;
// Serial.print("finished PUT: ");
// Serial.println(millis());
}
else {
Serial.print("connection failed!");
Serial.print(++failures);
found_status_200 = false;
found_session_id = false;
found_CSV = false;
ready_to_update = false;
reading_pachube = false;
request_pause = true;
last_connect = minute();
interval = RESET_INTERVAL;
setupEthernet();
}
}
while (reading_pachube){
while (localClient.available()) {
checkForResponse();
}
if (!localClient.connected()) {
disconnect_pachube();
}
}
}
unsigned char EthernetSup::available()
{
unsigned char ret = 0;
// listen for incoming clients
EthernetClient client = server.available();
if (client)
{
boolean currentLineIsBlank = true;
boolean isReferer = false;
while (client.connected())
{
if (client.available())
{
char c = client.read();
if (!isReferer)
{
findButtonId(client, c);
findDimmerValue(client, c);
isReferer = checkReferer(client, c);
}
if (c == '\n' && currentLineIsBlank)
{
// send a standard http response header
printP(client, http200);
printP(client, contenttype);
printP(client, connkeep);
printP(client, doctype);
// Verificando o tipo de botao
if (buttonIdx != -1)
{
if (buttonType[buttonIdx] == ONOFF_BUTTON)
{
buttonState[buttonIdx] = (buttonState[buttonIdx] ? 0 : 1);
}
else if (buttonType[buttonIdx] == DIMMER_BUTTON)
{
if (dimmerDirection[buttonIdx] == 1)
{
if (dimmerValue[buttonIdx] + dimmerStep[buttonIdx] < 255)
dimmerValue[buttonIdx] += dimmerStep[buttonIdx];
else
dimmerValue[buttonIdx] = 255;
}
else if (dimmerDirection[buttonIdx] == 2)
{
if (dimmerValue[buttonIdx] - dimmerStep[buttonIdx] > 0)
dimmerValue[buttonIdx] -= dimmerStep[buttonIdx];
else
dimmerValue[buttonIdx] = 0;
}
}
}
printP(client, head_ini);
printP(client, stylesheet);
printP(client, head_fim);
printP(client, div_ini);
for (int i = 0; i < MAX_BUTTONS; i++)
{
if (buttonType[i] != -1)
{
if (buttonType[i] == DIMMER_BUTTON)
{
printP(client, dimmer_ini1);
client.print(buttonText[i]);
// converting to percent
int val1 = map(dimmerValue[i], 0, 255, 0, 100);
client.print(val1, DEC);
client.print("%");
printP(client, dimmer_ini2);
// link do dimmer UP
printP(client, btnid);
client.print(buttonId[i], DEC);
printP(client, dimmerdown);
printP(client, dimmer_mid11);
printP(client, colorgreen);
printP(client, dimmer_mid12);
printP(client, dimmer_space);
printP(client, dimmer_space);
client.print("-");
printP(client, dimmer_space);
printP(client, dimmer_space);
printP(client, dimmer_mid2);
// link do dimmer DOWN
printP(client, btnid);
client.print(buttonId[i], DEC);
printP(client, dimmerup);
printP(client, dimmer_mid21);
printP(client, colorgreen);
printP(client, dimmer_mid22);
printP(client, dimmer_space);
printP(client, dimmer_space);
client.print("+");
printP(client, dimmer_space);
printP(client, dimmer_space);
printP(client, dimmer_fim);
}
else
{
printP(client, button_ini);
// link do botao
printP(client, btnid);
client.print(buttonId[i], DEC);
printP(client, button_mid1);
// cor do botao
if (buttonState[i] == 1)
{
printP(client, colorred);
}
else
{
printP(client, colorblue);
}
printP(client, button_mid2);
// texto do botao
client.print(buttonText[i]);
printP(client, button_fim);
}
}
}
printP(client, div_fim);
ret = 1;
break;
}
}
}
// give the web browser time to receive the data
delay(1);
// close the connection:
client.stop();
}
return ret;
}
int http_client::request(byte server[], unsigned short port, const char* url, const char* method, const char* data)
{
// clear out any old response that may be hanging around
if (response != NULL)
{
free(response);
response = NULL;
content_length = 0;
}
// validate/parse the url
size_t len = strlen(url);
char* host = (char*) malloc(len); // allocate string for host
if (host == NULL)
return OUT_OF_MEMORY;
char* path = (char*) malloc(len); // allocate string for path
if (path == NULL)
{
free(host);
return OUT_OF_MEMORY;
}
int ret = parse_url(url, host, path);
if (ret != SUCCESS)
{
free(host);
free(path);
return ret;
}
// make the connection
EthernetClient client;
if (!client.connect(server, port))
{
free(host);
free(path);
return CONNECTION_FAILED;
}
// default method is GET
if (method == NULL)
method = "GET";
// send up our request
char header_buffer[1024];
sprintf(header_buffer, "%s %s HTTP/1.0", method, path); // don't even think about 1.1
client.println(header_buffer);
Serial.println(header_buffer);
sprintf(header_buffer, "Host: %s", host);
client.println(header_buffer);
Serial.println(header_buffer);
sprintf(header_buffer, "User-Agent: %s", USER_AGENT);
client.println(header_buffer);
Serial.println(header_buffer);
if (data != NULL)
{
sprintf(header_buffer, "Content-Length: %d", strlen(data));
client.println(header_buffer);
Serial.println(header_buffer);
}
// send up any additional headers
// end of headers
client.println();
// send up data, if we have any
if (data != NULL)
client.print(data);
// now get the response
char* p = header_buffer;
bool in_headers = true;
content_length = 0;
while (client.available())
{
char c = client.read();
if (in_headers)
{
// header end in CRLF, so we'll ignore CR and process the line on LF
if (c == '\r')
{
// ignore and wait for linefeed
}
else if (c == '\n')
{
// terminate the string and see if we have a header or the body is starting
*p = 0;
if (strlen(header_buffer) == 0)
{
// if this is an empty line, we've reached the end of the headers
in_headers = false;
// set our pointer to the response buffer, which should have been allocated already
p = response;
}
else
{
// this is a header, certain ones are interesting to us
Serial.println(header_buffer);
// convert header name to lower case for comparison
char* ph = header_buffer;
while (*ph && *ph != ':')
*ph = tolower(*ph);
if (strstr(header_buffer, "content-length:") != NULL)
{
content_length = atoi(ph + 2);
response = (char*) malloc(content_length);
}
}
// reset the pointer for the next header
p = header_buffer;
}
else
{
// otherwise, this is just part of a header string, append it
*p++ = c;
}
}
else
{
// everything else gets appended to the response body
*p++ = c;
}
}
// we're done, close the connection
client.stop();
// clean up
free(host);
free(path);
return SUCCESS;
}
void ModbusTCP::run(void){
int16_t i, iStart, iQty;
int16_t iTXLen = 0; // response packet length
uint8_t *ptr, iFC = MB_FC_NONE, iEC = MB_EC_NONE;
//
// Initialize and check for a request from a MODBUS master
//
#ifdef MB_ETHERNET
EthernetClient clientrequest = mb_server.available();
#endif
#ifdef MB_CC3000
Adafruit_CC3000_ClientRef clientrequest = mb_server.available();
#endif
#ifdef ARDUINO_AMEBA
if (!clientrequest.connected()) {
clientrequest = mb_server.available();
}
#endif
#ifdef MODBUSTCP_PCN001_USE_WIFI
if(clientrequest.available()) {
int len = clientrequest.read(mb_adu, sizeof(mb_adu));
if (len > 0) {
iFC = mb_adu[MB_TCP_FUNC];
}
} else {
delay(10);
}
#else
if(clientrequest.available()) {
//
// Retrieve request
//
for (i = 0 ; clientrequest.available() ; i++)
mb_adu[i] = clientrequest.read();
#ifdef MB_DEBUG
printMB("RX: ", word(mb_adu[MB_TCP_LEN],mb_adu[MB_TCP_LEN+1])+6);
#endif
//
// Unpack the function code
//
iFC = mb_adu[MB_TCP_FUNC];
}
#endif // end of #ifdef ARDUINO_AMEBA
//
// Handle request
//
switch(iFC) {
case MB_FC_NONE:
break;
case MB_FC_READ_REGISTERS:
//
// 03 (0x03) Read Holding Registers
//
// modpoll -m tcp -t 4:float -r 40001 -c 1 -1 192.168.x.x
//
// [TransID] [ProtID-] [Length-] [Un] [FC] [Start--] [Qty----]
// RX: 0x00 0x01 0x00 0x00 0x00 0x06 0x01 0x03 0x9C 0x40 0x00 0x02
//
// [TransID] [ProtID-] [Length-] [Un] [FC] [Bc] [float------------]
// TX: 0x00 0x01 0x00 0x00 0x00 0x07 0x01 0x03 0x04 0x20 0x00 0x47 0xF1
//
// 123456.0 = 0x00 0x20 0xF1 0x47 (IEEE 754)
//
// Unpack the start and length
//
ptr = mb_adu + MB_TCP_DATA;
iStart = word(*ptr++, *ptr++) - 40000;
iQty = 2*word(*ptr++, *ptr);
//
// check for valid register addresses
//
if (iStart < 0 || (iStart + iQty/2 - 1) > MB_REGISTERS_MAX) {
iEC = MB_EC_ILLEGAL_DATA_ADDRESS;
break;
}
//
// Write data length
//
ptr = mb_adu + MB_TCP_DATA;
*ptr++ = iQty;
//
// Write data
//
for (i = 0 ; i < iQty/2 ; i++) {
*ptr++ = highByte(mb_reg[iStart + i]);
*ptr++ = lowByte(mb_reg[iStart + i]);
}
iTXLen = iQty + 9;
break;
case MB_FC_WRITE_REGISTER:
//
// 06 (0x06) Write register
//
ptr = mb_adu + MB_TCP_DATA;
iStart = word(*ptr++, *ptr++) - 40000;
//
// check for valid register addresses
//
if (iStart < 0 || (iStart - 1) > MB_REGISTERS_MAX) {
iEC = MB_EC_ILLEGAL_DATA_ADDRESS;
break;
}
// Unpack and store data
//
mb_reg[iStart] = word(*ptr++, *ptr);
//
// Build a response
//
iTXLen = 12;
break;
case MB_FC_WRITE_MULTIPLE_REGISTERS:
//
// 16 (0x10) Write Multiple registers
//
// modpoll -m tcp -t 4:float -r 40001 -c 1 -1 192.168.x.x 123456.0
//
// [TransID] [ProtID-] [Length-] [Un] [FC] [Start--] [Qty----] [Bc] [float------------]
// RX: 0x00 0x01 0x00 0x00 0x00 0x0B 0x01 0x10 0x9C 0x40 0x00 0x02 0x04 0x20 0x00 0x47 0xF1
//
// 123456.0 = 0x00 0x20 0xF1 0x47 (IEEE 754)
//
// Unpack the start and length
//
ptr = mb_adu + MB_TCP_DATA;
iStart = word(*ptr++, *ptr++) - 40000;
iQty = 2*word(*ptr++, *ptr);
//
// check for valid register addresses
//
if (iStart < 0 || (iStart + iQty/2 - 1) > MB_REGISTERS_MAX) {
iEC = MB_EC_ILLEGAL_DATA_ADDRESS;
break;
}
//
// Unpack and store data
//
ptr = mb_adu + MB_TCP_DATA+5;
// todo: check for valid length
for (i = 0 ; i < iQty/2 ; i++) {
mb_reg[iStart + i] = word(*ptr++, *ptr++);
}
//
// Build a response
//
iTXLen = 12;
break;
default:
iEC = MB_EC_ILLEGAL_FUNCTION;
break;
}
//
// Build exception response if necessary because we were too
// lazy to do it earlier. Other responses should already be
// built.
//
if (iEC) {
ptr = mb_adu + MB_TCP_FUNC;
*ptr = *ptr++ | 0x80; // flag the function code
*ptr = iEC; // write the exception code
iTXLen = 9;
}
//
// If there's a response, transmit it
//
if (iFC) {
ptr = mb_adu + MB_TCP_LEN; // write the header length
*ptr++ = 0x00;
*ptr = iTXLen - MB_TCP_UID;
clientrequest.write(mb_adu, iTXLen); // send it
#ifdef MB_DEBUG
printMB("TX: ", word(mb_adu[MB_TCP_LEN], mb_adu[MB_TCP_LEN+1]) + MB_TCP_UID);
#endif
}
}
void runExternalCommandsPersistent(EthernetServer* _server, systemState* _state)
{
// local variables
int i, buffer_ptr;
int room, radiatorState, automaticMode;
float temperature;
int commandError = 0;
EthernetClient client = _server->available(); // is non-blocking
if(client.available() > 2)
{
#ifdef DEBUG
Serial.println("Connection established");
Serial.print("Available: ");
Serial.println(client.available());
#endif
char buffer[32];
// read command field
if( readParam(buffer, 3, client) < 0 ) {commandError = 1; goto errorHandler;}
// switch case on commands
if(strcmp(buffer, "STM") == 0) // set temperature
{
#ifdef DEBUG
Serial.println("Set temperature command received");
#endif
// read fisrt param: room number (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
room = atoi(buffer);
// read second param: temperature (format xx.y)
if( readParam(buffer, 4, client) < 0 ) {commandError = 1; goto errorHandler;}
temperature = atof(buffer);
_state->desiredTemp[room] = temperature;
client.write((unsigned char*)"STM", 3);
client.write((unsigned char*)"OOK", 3);
}
else if(strcmp(buffer, "RTM") == 0) // read temperature
{
#ifdef DEBUG
Serial.println("Read temperature command received");
#endif
// read fisrt param: room number (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
room = atoi(buffer);
temperature = _state->actualTemp[room];
//buffer_ptr = sprintf(buffer, "%4.1f", temperature);
ttoa(buffer, temperature);
client.write((unsigned char*)"RTM", 3);
client.write((unsigned char*)"OOK", 3);
client.write((unsigned char*)buffer, 4);
}
else if(strcmp(buffer, "SRD") == 0) // set radiator
{
#ifdef DEBUG
Serial.println("Set radiator command received");
#endif
// read fisrt param: room number (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
room = atoi(buffer);
// read second param: radiator state (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
radiatorState = atoi(buffer);
_state->radiatorState[room] = radiatorState;
digitalWrite(radiatorPinByRoom(room), (radiatorState == 1) ? LOW : HIGH);
// set zone valve
int someoneIsOn = 0;
for(room = 0; room < 6; room++)
{
if(_state->radiatorState[room] == ON) someoneIsOn = 1;
}
digitalWrite(ZONE_VALVE_NO1, someoneIsOn ? LOW : HIGH);
client.write((unsigned char*)"SRD", 3);
client.write((unsigned char*)"OOK", 3);
}
else if(strcmp(buffer, "RRD") == 0) // read radiator
{
#ifdef DEBUG
Serial.println("Read radiator command received");
#endif
// read fisrt param: room number (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
room = atoi(buffer);
radiatorState = _state->radiatorState[room];
sprintf(buffer, "%d", radiatorState);
client.write((unsigned char*)"RRD", 3);
client.write((unsigned char*)"OOK", 3);
client.write((unsigned char*)buffer, 1);
}
else if(strcmp(buffer, "SAM") == 0) // set automatic mode
{
#ifdef DEBUG
Serial.println("Set automatic mode command received");
#endif
// read second param: radiator state (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
automaticMode = atoi(buffer);
_state->automaticMode = automaticMode;
client.write((unsigned char*)"SAM", 3);
client.write((unsigned char*)"OOK", 3);
}
else if(strcmp(buffer, "RAM") == 0) // read automatic mode
{
#ifdef DEBUG
Serial.println("Read automatic mode command received");
#endif
automaticMode = _state->automaticMode;
sprintf(buffer, "%d", automaticMode);
client.write((unsigned char*)"RAM", 3);
client.write((unsigned char*)"OOK", 3);
client.write((unsigned char*)buffer, 1);
}
else if(strcmp(buffer, "RDT") == 0) // read desired temperature
{
#ifdef DEBUG
Serial.println("Read desired temperature command received");
#endif
// read fisrt param: room number (one digit)
if( readParam(buffer, 1, client) < 0 ) {commandError = 1; goto errorHandler;}
room = atoi(buffer);
temperature = _state->desiredTemp[room];
//buffer_ptr = sprintf(buffer, "%4.1f", temperature);
ttoa(buffer, temperature);
client.write((unsigned char*)"RDT", 3);
client.write((unsigned char*)"OOK", 3);
client.write((unsigned char*)buffer, 4);
}
else if(strcmp(buffer, "CLS") == 0) // Close connection
{
#ifdef DEBUG
Serial.println("Close connection command received");
#endif
client.write((unsigned char*)"CLS", 3);
client.write((unsigned char*)"OOK", 3);
client.flush(); // NEW to verify ---> it seems not working
delay(2000);
while(client.connected())
{
client.stop();
delay(2000);
}
}
else
{
#ifdef DEBUG
Serial.print("Invalid command received: ");
Serial.print(buffer[0]);
Serial.print(buffer[1]);
Serial.print(buffer[2]);
Serial.println();
#endif
client.write((unsigned char*)"ERR", 3);
client.write((unsigned char*)"INV", 3);
}
// =============================================
errorHandler:
if(commandError)
{
#ifdef DEBUG
Serial.print("Invalid command received: ");
Serial.print(buffer[0]);
Serial.print(buffer[1]);
Serial.print(buffer[2]);
Serial.println();
#endif
client.write((unsigned char*)"ERR", 3);
client.write((unsigned char*)"GEN", 3);
}
// =============================================
}
}
// ---------------------------------------------------------------------------
// --- Main loop update ------------------------------------------------------
// ---------------------------------------------------------------------------
void PLabFileServer::update() {
// Main loop.
// Check if we have any new connections
EthernetClient client = available();
if (client) {
if (out) {
out->println();
// Buffer is initially considered empty
strcpy_P(bigBuf, plabRequest);
out->println(bigBuf);
out->println();
}
if (filter) {
filter->start();
}
// We should now start parsing our request
RequestState_t state = REQ_START;
RequestMethod_t method = METH_NOT_SUPPORTED;
int indexTracker = 0;
// While we still have an open connection to the client
while (client.connected()) {
if (client.available()) {
char c = client.read();
if (out) {
out->write(c);
}
state = reqStateTransition(state, c, indexTracker, method);
}
// By default we assume we have answered.
bool answered = true;
// Configuring answer, if we have any yet.
switch (state) {
case REQ_MESSAGE_BODY:
if (out) {
out->println();
// Safe to overwrite buffer: it should not contain anything
strcpy_P(bigBuf, plabResponse);
out->println(bigBuf);
out->println();
}
// GET and HEAD discard request body in this server
// Currently this (HEAD and GET) covers every possibility.
if (method == METH_HEAD || method == METH_GET) {
if (userControlledResponse) {
if (filter)
filter->writeResponse(client);
}
else {
// The exact same header
strcpy_P(bigBuf, plabHeaderHttp);
if (filter)
filter->filterResponseHeader(bigBuf, client);
cPrint(bigBuf, client);
strcpy_P(bigBuf, plab200OK);
if (filter)
filter->filterResponseHeader(bigBuf, client);
cPrintln(bigBuf, client);
if (internalMIMEIndex >= 0) {
strcpy_P(bigBuf, plabContentType);
if (filter)
filter->filterResponseHeader(bigBuf, client);
cPrint(bigBuf, client);
strcpy_P(bigBuf, (char*)pgm_read_word(&(plabMIMETypeTable[internalMIMEIndex])));
if (filter)
filter->filterResponseHeader(bigBuf, client);
cPrintln(bigBuf, client);
}
strcpy_P(bigBuf, plabConnectionClose);
if (filter)
filter->filterResponseHeader(bigBuf, client);
cPrintln(bigBuf, client);
// TODO Additional user defined header fields
cPrintln("", client); // HEADER stop
if (method == METH_GET) {
// Rediricting file location
if (filter)
filter->redirectReplyFile(sdFile);
#ifdef PLAB_DEBUG
if (out)
out->println("GET response");
#endif // PLAB_DEBUG
// ONLY get has message body
// TODO User defined body write
if (sdFile) {
while (sdFile.available()) {
char c = sdFile.read();
if (filter) {
if (filter->filterResponse(c, client))
cWrite(c, client);
}
else
cWrite(c, client);
}
sdFile.close();
}
#ifdef PLAB_DEBUG
else if (out)
out->println("File not open!");
#endif // PLAB_DEBUG
}
}
}
break;
// TODO Better error treatment
case BAD_REQ_400:
printDefaultError(400, client);
break;
case NOT_FOUND_404:
printDefaultError(404, client);
break;
case METHOD_NOT_ALLOWED_405:
printDefaultError(405, client);
break;
case REQUEST_URI_TOO_LONG_414:
printDefaultError(414, client);
break;
case INTERNAL_SERVER_ERROR_500:
printDefaultError(500, client);
break;
case NOT_IMPLEMENTED_501:
printDefaultError(501, client);
break;
case HTTP_VERSION_NOT_SUPPORTED_505:
printDefaultError(505, client);
break;
default:
// No other state (as of yet) produces an answer
answered = false;
}
// Clean, if need be
if (answered) {
if (sdFile) {
sdFile.close();
}
// Client should have some time to process answer
delay(1);
client.stop();
client.flush();
}
}
if (filter)
filter->end();
}
}
void loop()
{
switch (rs485State)
{
case Rs485Loopback:
serialReadString();
serialWriteString();
break;
case Rs485RxTest:
if (TIMER_COUNT_1S < timerCounter)
{
Serial.write("~!EloHello$75~");
timerCounter = 0;
}
break;
case Rs485TxTest:
serialReadString();
break;
default:
break;
}
// Create a client connection
EthernetClient client = server.available();
if (client)
{
while (client.connected())
{
if (client.available())
{
char c = client.read();
//read char by char HTTP request
if (readString.length() < 100) {
//store characters to string
readString += c;
}
//if HTTP request has ended
if (c == '\n')
{
//controls the Arduino if you press the buttons
if (readString.indexOf("?button485Loopback") >0) changeRs485Mode(Rs485Loopback);
else if (readString.indexOf("?button485RxTest") >0) changeRs485Mode(Rs485RxTest);
else if (readString.indexOf("?button485TxTest") >0) changeRs485Mode(Rs485TxTest);
//clearing string for next read
readString="";
client.println("HTTP/1.1 200 OK"); //send new page
client.println("Content-Type: text/html");
client.println("Refresh: 5"); // refresh the page automatically every 5 sec
client.println();
client.println("<HTML>");
client.println("<HEAD>");
refreshSection(client);
client.println("<meta name='apple-mobile-web-app-capable' content='yes' />");
client.println("<meta name='apple-mobile-web-app-status-bar-style' content='black-translucent' />");
client.println("<link rel='stylesheet' type='text/css' href='http://randomnerdtutorials.com/ethernetcss.css' />");
client.println("<TITLE>RS-485 - RET tester</TITLE>");
client.println("</HEAD>");
client.println("<BODY>");
client.println("<H1>RS-485 - RET tester</H1>");
client.println("<hr />");
client.println("<br />");
client.println("<H2>RS-485 mode</H2>");
client.println("<a href=\"/?button485Loopback\"\">1. RS-485 Loopback</a>");
client.println("<a href=\"/?button485RxTest\"\">2. RS-485 RX Test</a>");
client.println("<a href=\"/?button485TxTest\"\">3. RS-485 TX Test</a>");
client.println("<br />");
client.println("<H2>RET Status</H2>");
// DC Voltage section
// RS485 section
client.print("<a style=\"background-color:#4DB257\">RS-485 mode: "); //
client.print(rs485State);
client.println("</a> <br />");
client.println("<br />");
// Last 10 received messages section
client.print("<H2>Last ");
client.print(MSG_BUFFER_SIZE);
client.println(" received messages</H2>");
char counter = msgBuffer.counter;
for(char i = 0; i < MSG_BUFFER_SIZE; ++i)
{
client.print(msgBuffer.readString[counter]);
client.println("<br />");
if (--counter < 0) counter = MSG_BUFFER_SIZE-1;
}
client.println("<br />");
client.println("</BODY>");
client.println("</HTML>");
delay(1);
//stopping client
client.stop();
}
}
}
}
}
// The loop function is called in an endless loop
void loop() {
// if there's incoming data from the net connection.
// send it out the serial port. This is for debugging
// purposes only:
if (client.available()) {
char c = client.read();
Serial.print(c);
}
// if there's no net connection, but there was one last time
// through the loop, then stop the client:
if (!client.connected() && wasConnected) {
Serial.println();
Serial.println("disconnecting.");
client.stop();
wasConnected = false;
}
if (PowerSerial::solar.count < 0) {
int waitTime = millis() - lastupdate;
if (waitTime > 30000) {
String jsonResult = PowerSerial::solar.jsonResult;
Serial.println("transmit Every 30 seconds");
lastupdate = millis();
lmillis = tmillis; //timing to determine amount of time since last call
tmillis = millis();
delay(1000);
if (!client.connected()) {
Serial.println(jsonResult);
// if there's a successful connection:
Serial.println("!client.connected() --> 1");
// DNSClient dns;
// IPAddress remote_addr;
// dns.begin(Ethernet.dnsServerIP());
// int ret = dns.getHostByName(serverName, remote_addr);
// if (ret == 1) {
// Serial.println(serverName);
// Serial.println(remote_addr);
// } else {
// Serial.println("Fail !!!");
// }
if (client.connect(serverName, 80)) {
delay(1000);
Serial.println("!client.connect() --> 2");
wasConnected = true;
Serial.println("connecting...");
// send the HTTP PUT request:
String str = "GET ";
str.concat(input);
str.concat(apikey);
str.concat(inputJson);
str.concat(jsonResult);
str.concat(" HTTP/1.0");
client.println(str);
client.println("Host: emoncms.org");
client.println("User-Agent: arduino-ethernet");
client.println("Connection: close");
client.println();
client.flush();
Serial.println(str);
Serial.println("Respons:");
Serial.println(client.readString());
PowerSerial::solar.count = 0;
} else {
delay(1000);
// if you couldn't make a connection:
Serial.println("connection failed");
Serial.println();
Serial.println("disconnecting.");
client.stop();
}
}
} else {
// Serial.print("Still waiting: ");
// Serial.println(waitTime);
}
} else {
Serial.println("Powerserial has no result .... waiting: ");
}
if (PowerSerial::solar.count >= 0){
PowerSerial::parse();
}
}