int main(int argc, char* argv[]) {
int returnCode = 0;
std::string context;
bool alwaysAddContext = true;
boost::shared_ptr<edm::Presence> theMessageServicePresence;
std::auto_ptr<std::ofstream> jobReportStreamPtr;
boost::shared_ptr<edm::serviceregistry::ServiceWrapper<edm::JobReport> > jobRep;
EventProcessorWithSentry proc;
try {
try {
// NOTE: MacOs X has a lower rlimit for opened file descriptor than Linux (256
// in Snow Leopard vs 512 in SLC5). This is a problem for some of the workflows
// that open many small root datafiles. Notice that this is safe to do also
// for Linux, but we agreed not to change the behavior there for the moment.
// Also the limits imposed by ulimit are not affected and still apply, if
// there.
#ifdef __APPLE__
context = "Setting file descriptor limit";
struct rlimit limits;
getrlimit(RLIMIT_NOFILE, &limits);
limits.rlim_cur = (OPEN_MAX < limits.rlim_max) ? OPEN_MAX : limits.rlim_max;
setrlimit(RLIMIT_NOFILE, &limits);
#endif
context = "Initializing plug-in manager";
edmplugin::PluginManager::configure(edmplugin::standard::config());
// Decide whether to use the multi-thread or single-thread message logger
// (Just walk the command-line arguments, since the boost parser will
// be run below and can lead to error messages which should be sent via
// the message logger)
context = "Initializing either multi-threaded or single-threaded message logger";
bool multiThreadML = false;
for(int i = 0; i < argc; ++i) {
if((std::strncmp (argv[i], "-t", 20) == 0) ||
(std::strncmp (argv[i], "--multithreadML", 20) == 0)) {
multiThreadML = true;
break;
}
}
// Load the message service plug-in
if(multiThreadML) {
theMessageServicePresence = boost::shared_ptr<edm::Presence>(edm::PresenceFactory::get()->
makePresence("MessageServicePresence").release());
}
else {
theMessageServicePresence = boost::shared_ptr<edm::Presence>(edm::PresenceFactory::get()->
makePresence("SingleThreadMSPresence").release());
}
context = "Processing command line arguments";
std::string descString(argv[0]);
descString += " [options] [--";
descString += kParameterSetOpt;
descString += "] config_file \nAllowed options";
boost::program_options::options_description desc(descString);
desc.add_options()
(kHelpCommandOpt, "produce help message")
(kParameterSetCommandOpt, boost::program_options::value<std::string>(), "configuration file")
(kJobreportCommandOpt, boost::program_options::value<std::string>(),
"file name to use for a job report file: default extension is .xml")
(kEnableJobreportCommandOpt,
"enable job report files (if any) specified in configuration file")
(kJobModeCommandOpt, boost::program_options::value<std::string>(),
"Job Mode for MessageLogger defaults - default mode is grid")
(kMultiThreadMessageLoggerOpt,
"MessageLogger handles multiple threads - default is single-thread")
(kStrictOpt, "strict parsing");
// anything at the end will be ignored, and sent to python
boost::program_options::positional_options_description p;
p.add(kParameterSetOpt, 1).add(kPythonOpt, -1);
// This --fwk option is not used anymore, but I'm leaving it around as
// it might be useful again in the future for code development
// purposes. We originally used it when implementing the boost
// state machine code.
boost::program_options::options_description hidden("hidden options");
hidden.add_options()("fwk", "For use only by Framework Developers")
(kPythonOpt, boost::program_options::value< std::vector<std::string> >(),
"options at the end to be passed to python");
boost::program_options::options_description all_options("All Options");
all_options.add(desc).add(hidden);
boost::program_options::variables_map vm;
try {
store(boost::program_options::command_line_parser(argc, argv).options(all_options).positional(p).run(), vm);
notify(vm);
}
catch (boost::program_options::error const& iException) {
edm::LogAbsolute("CommandLineProcessing") << "cmsRun: Error while trying to process command line arguments:\n"
<< iException.what()
<< "\nFor usage and an options list, please do 'cmsRun --help'.";
return edm::errors::CommandLineProcessing;
}
if (vm.count(kHelpOpt)) {
std::cout << desc << std::endl;
if (!vm.count(kParameterSetOpt)) edm::HaltMessageLogging();
return 0;
}
if (!vm.count(kParameterSetOpt)) {
edm::LogAbsolute("ConfigFileNotFound") << "cmsRun: No configuration file given.\n"
<< "For usage and an options list, please do 'cmsRun --help'.";
edm::HaltMessageLogging();
return edm::errors::ConfigFileNotFound;
}
std::string fileName(vm[kParameterSetOpt].as<std::string>());
if (vm.count(kStrictOpt)) {
//edm::setStrictParsing(true);
edm::LogSystem("CommandLineProcessing") << "Strict configuration processing is now done from python";
}
context = "Creating the JobReport Service";
// Decide whether to enable creation of job report xml file
// We do this first so any errors will be reported
std::string jobReportFile;
if (vm.count("jobreport")) {
jobReportFile = vm["jobreport"].as<std::string>();
} else if(vm.count("enablejobreport")) {
jobReportFile = "FrameworkJobReport.xml";
}
jobReportStreamPtr = std::auto_ptr<std::ofstream>(jobReportFile.empty() ? 0 : new std::ofstream(jobReportFile.c_str()));
//NOTE: JobReport must have a lifetime shorter than jobReportStreamPtr so that when the JobReport destructor
// is called jobReportStreamPtr is still valid
std::auto_ptr<edm::JobReport> jobRepPtr(new edm::JobReport(jobReportStreamPtr.get()));
jobRep.reset(new edm::serviceregistry::ServiceWrapper<edm::JobReport>(jobRepPtr));
edm::ServiceToken jobReportToken =
edm::ServiceRegistry::createContaining(jobRep);
context = "Processing the python configuration file named ";
context += fileName;
boost::shared_ptr<edm::ProcessDesc> processDesc;
try {
boost::shared_ptr<edm::ParameterSet> parameterSet = edm::readConfig(fileName, argc, argv);
processDesc.reset(new edm::ProcessDesc(parameterSet));
}
catch(cms::Exception& iException) {
edm::Exception e(edm::errors::ConfigFileReadError, "", iException);
throw e;
}
context = "Initializing default service configurations";
std::vector<std::string> defaultServices;
defaultServices.reserve(6);
defaultServices.push_back("MessageLogger");
defaultServices.push_back("InitRootHandlers");
#ifdef linux
defaultServices.push_back("EnableFloatingPointExceptions");
#endif
defaultServices.push_back("UnixSignalService");
defaultServices.push_back("AdaptorConfig");
defaultServices.push_back("SiteLocalConfigService");
// Default parameters will be used for the default services
// if they are not overridden from the configuration files.
processDesc->addServices(defaultServices);
context = "Setting MessageLogger defaults";
// Decide what mode of hardcoded MessageLogger defaults to use
if (vm.count("mode")) {
std::string jobMode = vm["mode"].as<std::string>();
edm::MessageDrop::instance()->jobMode = jobMode;
}
context = "Constructing the EventProcessor";
std::auto_ptr<edm::EventProcessor>
procP(new
edm::EventProcessor(processDesc, jobReportToken,
edm::serviceregistry::kTokenOverrides));
EventProcessorWithSentry procTmp(procP);
proc = procTmp;
alwaysAddContext = false;
context = "Calling beginJob";
proc->beginJob();
alwaysAddContext = true;
context = "Calling EventProcessor::forkProcess";
if (!proc->forkProcess(jobReportFile)) {
return 0;
}
alwaysAddContext = false;
context = "Calling EventProcessor::runToCompletion (which does almost everything after beginJob and before endJob)";
proc.on();
bool onlineStateTransitions = false;
edm::EventProcessor::StatusCode status = proc->runToCompletion(onlineStateTransitions);
if (status == edm::EventProcessor::epSignal) {
returnCode = edm::errors::CaughtSignal;
}
proc.off();
context = "Calling endJob";
proc->endJob();
}
catch (cms::Exception& e) {
throw;
}
// The functions in the following catch blocks throw an edm::Exception
catch(std::bad_alloc& bda) {
edm::convertException::badAllocToEDM();
}
catch (std::exception& e) {
edm::convertException::stdToEDM(e);
}
catch(std::string& s) {
edm::convertException::stringToEDM(s);
}
catch(char const* c) {
edm::convertException::charPtrToEDM(c);
}
catch (...) {
edm::convertException::unknownToEDM();
}
}
// All exceptions which are not handled before propagating
// into main will get caught here.
catch (cms::Exception& ex) {
returnCode = ex.returnCode();
if (!context.empty()) {
if (alwaysAddContext) {
ex.addContext(context);
}
else if (ex.context().empty()) {
ex.addContext(context);
}
}
if (!ex.alreadyPrinted()) {
if (jobRep.get() != 0) {
edm::printCmsException(ex, &(jobRep->get()), returnCode);
}
else {
edm::printCmsException(ex);
}
}
}
// Disable Root Error Handler.
SetErrorHandler(DefaultErrorHandler);
return returnCode;
}
int main(int argc, char* argv[])
{
// NOTE: MacOs X has a lower rlimit for opened file descriptor than Linux (256
// in Snow Leopard vs 512 in SLC5). This is a problem for some of the workflows
// that open many small root datafiles. Notice that this is safe to do also
// for Linux, but we agreed not to change the behavior there for the moment.
// Also the limits imposed by ulimit are not affected and still apply, if
// there.
#ifdef __APPLE__
struct rlimit limits;
getrlimit(RLIMIT_NOFILE, &limits);
limits.rlim_cur = (OPEN_MAX < limits.rlim_max) ? OPEN_MAX : limits.rlim_max;
setrlimit(RLIMIT_NOFILE, &limits);
#endif
// We must initialize the plug-in manager first
try {
edmplugin::PluginManager::configure(edmplugin::standard::config());
} catch(const std::exception& e) {
std::cerr << e.what() << std::endl;
return 1;
}
// Decide whether to use the multi-thread or single-thread message logger
// (Just walk the command-line arguments, since the boost parser will
// be run below and can lead to error messages which should be sent via
// the message logger)
bool multiThreadML = false;
for (int i=0; i<argc; ++i) {
if ( (std::strncmp (argv[i],"-t", 20) == 0) ||
(std::strncmp (argv[i],"--multithreadML", 20) == 0) )
{ multiThreadML = true;
break;
}
}
// TEMPORARY -- REMOVE AT ONCE!!!!!
// if ( multiThreadML ) std::cerr << "\n\n multiThreadML \n\n";
// Load the message service plug-in
boost::shared_ptr<edm::Presence> theMessageServicePresence;
if (multiThreadML)
{
try {
theMessageServicePresence = boost::shared_ptr<edm::Presence>(edm::PresenceFactory::get()->
makePresence("MessageServicePresence").release());
} catch(cms::Exception& e) {
std::cerr << e.what() << std::endl;
return 1;
}
} else {
try {
theMessageServicePresence = boost::shared_ptr<edm::Presence>(edm::PresenceFactory::get()->
makePresence("SingleThreadMSPresence").release());
} catch(cms::Exception& e) {
std::cerr << e.what() << std::endl;
return 1;
}
}
//
// Specify default services to be enabled with their default parameters.
//
// The parameters for these can be overridden from the configuration files.
std::vector<std::string> defaultServices;
defaultServices.reserve(6);
defaultServices.push_back("MessageLogger");
defaultServices.push_back("InitRootHandlers");
#ifdef linux
defaultServices.push_back("EnableFloatingPointExceptions");
#endif
defaultServices.push_back("UnixSignalService");
defaultServices.push_back("AdaptorConfig");
defaultServices.push_back("SiteLocalConfigService");
// These cannot be overridden from the configuration files.
// An exception will be thrown if any of these is specified there.
std::vector<std::string> forcedServices;
forcedServices.reserve(1);
forcedServices.push_back("JobReportService");
std::string descString(argv[0]);
descString += " [options] [--";
descString += kParameterSetOpt;
descString += "] config_file \nAllowed options";
boost::program_options::options_description desc(descString);
desc.add_options()
(kHelpCommandOpt, "produce help message")
(kParameterSetCommandOpt, boost::program_options::value<std::string>(), "configuration file")
(kJobreportCommandOpt, boost::program_options::value<std::string>(),
"file name to use for a job report file: default extension is .xml")
(kEnableJobreportCommandOpt,
"enable job report files (if any) specified in configuration file")
(kJobModeCommandOpt, boost::program_options::value<std::string>(),
"Job Mode for MessageLogger defaults - default mode is grid")
(kMultiThreadMessageLoggerOpt,
"MessageLogger handles multiple threads - default is single-thread")
(kStrictOpt, "strict parsing");
// anything at the end will be ignored, and sent to python
boost::program_options::positional_options_description p;
p.add(kParameterSetOpt, 1).add(kPythonOpt, -1);
// This --fwk option is not used anymore, but I'm leaving it around as
// it might be useful again in the future for code development
// purposes. We originally used it when implementing the boost
// state machine code.
boost::program_options::options_description hidden("hidden options");
hidden.add_options()("fwk", "For use only by Framework Developers")
(kPythonOpt, boost::program_options::value< std::vector<std::string> >(),
"options at the end to be passed to python");
boost::program_options::options_description all_options("All Options");
all_options.add(desc).add(hidden);
boost::program_options::variables_map vm;
try {
store(boost::program_options::command_line_parser(argc,argv).options(all_options).positional(p).run(),vm);
notify(vm);
} catch(boost::program_options::error const& iException) {
edm::LogError("FwkJob") << "Exception from command line processing: " << iException.what();
edm::LogSystem("CommandLineProcessing") << "Exception from command line processing: " << iException.what() << "\n";
return 7000;
}
if(vm.count(kHelpOpt)) {
std::cout << desc <<std::endl;
if(!vm.count(kParameterSetOpt)) edm::HaltMessageLogging();
return 0;
}
if(!vm.count(kParameterSetOpt)) {
std::string shortDesc("ConfigFileNotFound");
std::ostringstream longDesc;
longDesc << "cmsRun: No configuration file given.\n"
<< "For usage and an options list, please do '"
<< argv[0]
<< " --"
<< kHelpOpt
<< "'.";
int exitCode = 7001;
edm::LogAbsolute(shortDesc) << longDesc.str() << "\n";
edm::HaltMessageLogging();
return exitCode;
}
#ifdef CHANGED_FROM
if(!vm.count(kParameterSetOpt)) {
std::string shortDesc("ConfigFileNotFound");
std::ostringstream longDesc;
longDesc << "No configuration file given \n"
<<" please do '"
<< argv[0]
<< " --"
<< kHelpOpt
<< "'.";
int exitCode = 7001;
jobRep->reportError(shortDesc, longDesc.str(), exitCode);
edm::LogSystem(shortDesc) << longDesc.str() << "\n";
return exitCode;
}
#endif
//
// Decide whether to enable creation of job report xml file
// We do this first so any errors will be reported
//
std::string jobReportFile;
if (vm.count("jobreport")) {
jobReportFile = vm["jobreport"].as<std::string>();
} else if (vm.count("enablejobreport")) {
jobReportFile = "FrameworkJobReport.xml";
}
std::auto_ptr<std::ofstream> jobReportStreamPtr = std::auto_ptr<std::ofstream>(jobReportFile.empty() ? 0 : new std::ofstream(jobReportFile.c_str()));
//
// Make JobReport Service up front
//
//NOTE: JobReport must have a lifetime shorter than jobReportStreamPtr so that when the JobReport destructor
// is called jobReportStreamPtr is still valid
std::auto_ptr<edm::JobReport> jobRepPtr(new edm::JobReport(jobReportStreamPtr.get()));
boost::shared_ptr<edm::serviceregistry::ServiceWrapper<edm::JobReport> > jobRep( new edm::serviceregistry::ServiceWrapper<edm::JobReport>(jobRepPtr) );
edm::ServiceToken jobReportToken =
edm::ServiceRegistry::createContaining(jobRep);
std::string fileName(vm[kParameterSetOpt].as<std::string>());
boost::shared_ptr<edm::ProcessDesc> processDesc;
try {
processDesc = edm::readConfig(fileName, argc, argv);
}
catch(cms::Exception& iException) {
std::string shortDesc("ConfigFileReadError");
std::ostringstream longDesc;
longDesc << "Problem with configuration file " << fileName
<< "\n" << iException.what();
int exitCode = 7002;
jobRep->get().reportError(shortDesc, longDesc.str(), exitCode);
edm::LogSystem(shortDesc) << longDesc.str() << "\n";
return exitCode;
}
processDesc->addServices(defaultServices, forcedServices);
//
// Decide what mode of hardcoded MessageLogger defaults to use
//
if (vm.count("mode")) {
std::string jobMode = vm["mode"].as<std::string>();
edm::MessageDrop::instance()->jobMode = jobMode;
}
if(vm.count(kStrictOpt))
{
//edm::setStrictParsing(true);
edm::LogSystem("CommandLineProcessing") << "Strict configuration processing is now done from python";
}
// Now create and configure the services
//
EventProcessorWithSentry proc;
int rc = -1; // we should never return this value!
try {
std::auto_ptr<edm::EventProcessor>
procP(new
edm::EventProcessor(processDesc, jobReportToken,
edm::serviceregistry::kTokenOverrides));
EventProcessorWithSentry procTmp(procP);
proc = procTmp;
proc->beginJob();
if(!proc->forkProcess(jobReportFile)) {
return 0;
}
proc.on();
bool onlineStateTransitions = false;
proc->runToCompletion(onlineStateTransitions);
proc.off();
proc->endJob();
rc = 0;
// Disable Root Error Handler so we do not throw because of ROOT errors.
edm::ServiceToken token = proc->getToken();
edm::ServiceRegistry::Operate operate(token);
edm::Service<edm::RootHandlers> rootHandler;
rootHandler->disableErrorHandler();
}
catch (edm::Exception& e) {
rc = e.returnCode();
edm::printCmsException(e, kProgramName, &(jobRep->get()), rc);
}
catch (cms::Exception& e) {
rc = 8001;
edm::printCmsException(e, kProgramName, &(jobRep->get()), rc);
}
catch(std::bad_alloc& bda) {
rc = 8004;
edm::printBadAllocException(kProgramName, &(jobRep->get()), rc);
}
catch (std::exception& e) {
rc = 8002;
edm::printStdException(e, kProgramName, &(jobRep->get()), rc);
}
catch (...) {
rc = 8003;
edm::printUnknownException(kProgramName, &(jobRep->get()), rc);
}
// Disable Root Error Handler again, just in case an exception
// caused the above disabling of the handler to be bypassed.
SetErrorHandler(DefaultErrorHandler);
return rc;
}
