Exemplo n.º 1
0
/***********************************************************************//**
 * @brief Test CTA Npred computation
 *
 * Tests the Npred computation for the diffuse source model. This is done
 * by loading the model from the XML file and by calling the
 * GCTAObservation::npred method which in turn calls the
 * GCTAResponse::npred_diffuse method. The test takes a few seconds.
 ***************************************************************************/
void TestGCTAResponse::test_response_npred_diffuse(void)
{
    // Set reference value
    double ref = 11212.26274;

    // Set parameters
    double src_ra  = 201.3651;
    double src_dec = -43.0191;
    double roi_rad =   4.0;

    // Setup ROI centred on Cen A with a radius of 4 deg
    GCTARoi     roi;
    GCTAInstDir instDir;
    instDir.radec_deg(src_ra, src_dec);
    roi.centre(instDir);
    roi.radius(roi_rad);

    // Setup pointing on Cen A
    GSkyDir skyDir;
    skyDir.radec_deg(src_ra, src_dec);
    GCTAPointing pnt;
    pnt.dir(skyDir);

    // Setup dummy event list
    GGti     gti;
    GEbounds ebounds;
    GTime    tstart(0.0);
    GTime    tstop(1800.0);
    GEnergy  emin;
    GEnergy  emax;
    emin.TeV(0.1);
    emax.TeV(100.0);
    gti.append(tstart, tstop);
    ebounds.append(emin, emax);
    GCTAEventList events;
    events.roi(roi);
    events.gti(gti);
    events.ebounds(ebounds);

    // Setup dummy CTA observation
    GCTAObservation obs;
    obs.ontime(1800.0);
    obs.livetime(1600.0);
    obs.deadc(1600.0/1800.0);
    obs.response(cta_irf, cta_caldb);
    obs.events(&events);
    obs.pointing(pnt);

    // Load models for Npred computation
    GModels models(cta_rsp_xml);

    // Perform Npred computation
    double npred = obs.npred(models, NULL);

    // Test Npred
    test_value(npred, ref, 1.0e-5, "Diffuse Npred computation");

    // Return
    return;
}
Exemplo n.º 2
0
/***********************************************************************//**
 * @brief Return simulated list of events
 *
 * @param[in] obs Observation.
 * @param[in] ran Random number generator.
 * @return Pointer to list of simulated events (needs to be de-allocated by
 *         client)
 *
 * @exception GException::invalid_argument
 *            No CTA event list found in observation.
 *
 * Draws a sample of events from the background model using a Monte
 * Carlo simulation. The pointing information, the energy boundaries and the
 * good time interval for the sampling will be extracted from the observation
 * argument that is passed to the method. The method also requires a random
 * number generator of type GRan which is passed by reference, hence the
 * state of the random number generator will be changed by the method.
 *
 * The method also applies a deadtime correction using a Monte Carlo process,
 * taking into account temporal deadtime variations. For this purpose, the
 * method makes use of the time dependent GObservation::deadc method.
 ***************************************************************************/
GCTAEventList* GCTAModelBackground::mc(const GObservation& obs, GRan& ran) const
{
    // Initialise new event list
    GCTAEventList* list = new GCTAEventList;

    // Continue only if model is valid)
    if (valid_model()) {

        // Extract event list to access the ROI, energy boundaries and GTIs
        const GCTAEventList* events = dynamic_cast<const GCTAEventList*>(obs.events());
        if (events == NULL) {
            std::string msg = "No CTA event list found in observation.\n" +
                              obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Get simulation region
        const GCTARoi&  roi     = events->roi();
        const GEbounds& ebounds = events->ebounds();
        const GGti&     gti     = events->gti();

        // Set simulation region for result event list
        list->roi(roi);
        list->ebounds(ebounds);
        list->gti(gti);

        // Loop over all energy boundaries
        for (int ieng = 0; ieng < ebounds.size(); ++ieng) {

            // Initialise de-allocation flag
            bool free_spectral = false;

            // Set pointer to spectral model
            GModelSpectral* spectral = m_spectral;

            // If the spectral model is a diffuse cube then create a node
            // function spectral model that is the product of the diffuse
            // cube node function and the spectral model evaluated at the
            // energies of the node function
            GModelSpatialDiffuseCube* cube =
                dynamic_cast<GModelSpatialDiffuseCube*>(m_spatial);
            if (cube != NULL) {

			   // Set MC simulation cone based on ROI
			   cube->set_mc_cone(roi.centre().dir(), roi.radius());

			   // Allocate node function to replace the spectral component
			   GModelSpectralNodes* nodes = new GModelSpectralNodes(cube->spectrum());
			   for (int i = 0; i < nodes->nodes(); ++i) {
				   GEnergy energy    = nodes->energy(i);
				   double  intensity = nodes->intensity(i);
				   double  norm      = m_spectral->eval(energy, events->tstart());
				   nodes->intensity(i, norm*intensity);
			   }

			   // Signal that node function needs to be de-allocated later
			   free_spectral = true;

			   // Set the spectral model pointer to the node function
			   spectral = nodes;

            } // endif: spatial model was a diffuse cube

            // Compute the background rate in model within the energy boundaries
            // from spectral component (units: cts/s).
            // Note that the time here is ontime. Deadtime correction will be done
            // later.
            double rate = spectral->flux(ebounds.emin(ieng), ebounds.emax(ieng));

            // Debug option: dump rate
            #if defined(G_DUMP_MC)
            std::cout << "GCTAModelBackground::mc(\"" << name() << "\": ";
            std::cout << "rate=" << rate << " cts/s)" << std::endl;
            #endif

            // Loop over all good time intervals
            for (int itime = 0; itime < gti.size(); ++itime) {

                // Get Monte Carlo event arrival times from temporal model
                GTimes times = m_temporal->mc(rate,
                                              gti.tstart(itime),
                                              gti.tstop(itime),
                                              ran);

                // Get number of events
                int n_events = times.size();

                // Reserve space for events
                if (n_events > 0) {
                    list->reserve(n_events);
                }

                // Loop over events
                for (int i = 0; i < n_events; ++i) {

                    // Apply deadtime correction
                    double deadc = obs.deadc(times[i]);
                    if (deadc < 1.0) {
                        if (ran.uniform() > deadc) {
                            continue;
                        }
                    }

                    // Get Monte Carlo event energy from spectral model
                    GEnergy energy = spectral->mc(ebounds.emin(ieng),
                                                  ebounds.emax(ieng),
                                                  times[i],
                                                  ran);

                    // Get Monte Carlo event direction from spatial model
                    GSkyDir dir = spatial()->mc(energy, times[i], ran);

                    // Allocate event
                    GCTAEventAtom event;

                    // Set event attributes
                    event.dir(GCTAInstDir(dir));
                    event.energy(energy);
                    event.time(times[i]);

                    // Append event to list if it falls in ROI
                    if (events->roi().contains(event)) {
                        list->append(event);
                    }

                } // endfor: looped over all events

            } // endfor: looped over all GTIs

            // Free spectral model if required
            if (free_spectral) delete spectral;

        } // endfor: looped over all energy boundaries

    } // endif: model was valid

    // Return
    return list;
}
Exemplo n.º 3
0
/***********************************************************************//**
 * @brief Simulate source events from photon list
 *
 * @param[in] obs Pointer on CTA observation.
 * @param[in] models Model list.
 * @param[in] ran Random number generator.
 * @param[in] wrklog Pointer to logger.
 *
 * Simulate source events from a photon list for a given CTA observation.
 * The events are stored in as event list in the observation.
 *
 * This method does nothing if the observation pointer is NULL. It also
 * verifies if the observation has a valid pointing and response.
 ***************************************************************************/
void ctobssim::simulate_source(GCTAObservation* obs, const GModels& models,
                               GRan& ran, GLog* wrklog)
{
    // Continue only if observation pointer is valid
    if (obs != NULL) {

        // If no logger is specified then use the default logger
        if (wrklog == NULL) {
            wrklog = &log;
        }

        // Get CTA response
        const GCTAResponseIrf* rsp =
            dynamic_cast<const GCTAResponseIrf*>(obs->response());
        if (rsp == NULL) {
            std::string msg = "Response is not an IRF response.\n" +
                              obs->response()->print();
            throw GException::invalid_value(G_SIMULATE_SOURCE, msg);
        }

        // Get pointer on event list (circumvent const correctness)
        GCTAEventList* events =
            static_cast<GCTAEventList*>(const_cast<GEvents*>(obs->events()));

        // Extract simulation region.
        GSkyDir dir = events->roi().centre().dir();
        double  rad = events->roi().radius() + g_roi_margin;

        // Dump simulation cone information
        if (logNormal()) {
            *wrklog << gammalib::parformat("Simulation area");
            *wrklog << m_area << " cm2" << std::endl;
            *wrklog << gammalib::parformat("Simulation cone");
            *wrklog << "RA=" << dir.ra_deg() << " deg";
            *wrklog << ", Dec=" << dir.dec_deg() << " deg";
            *wrklog << ", r=" << rad << " deg" << std::endl;
        }

        // Initialise indentation for logging
        int indent = 0;

        // Loop over all Good Time Intervals
        for (int it = 0; it < events->gti().size(); ++it) {

            // Extract time interval
            GTime tmin = events->gti().tstart(it);
            GTime tmax = events->gti().tstop(it);

            // Dump time interval
            if (logNormal()) {
                if (events->gti().size() > 1) {
                    indent++;
                    wrklog->indent(indent);
                }
                *wrklog << gammalib::parformat("Time interval", indent);
                *wrklog << tmin.convert(m_cta_ref);
                *wrklog << " - ";
                *wrklog << tmax.convert(m_cta_ref);
                *wrklog << " s" << std::endl;
            }

            // Loop over all energy boundaries
            for (int ie = 0; ie <  events->ebounds().size(); ++ie) {

                // Extract energy boundaries
                GEnergy emin = events->ebounds().emin(ie);
                GEnergy emax = events->ebounds().emax(ie);

                // Set true photon energy limits for simulation. If observation
                // has energy dispersion then add margin
                GEnergy e_true_min = emin;
                GEnergy e_true_max = emax;
                if (rsp->use_edisp()) {
                    e_true_min = rsp->ebounds(e_true_min).emin();
                    e_true_max = rsp->ebounds(e_true_max).emax();
                }

                // Dump energy range
                if (logNormal()) {
                    if (events->ebounds().size() > 1) {
                        indent++;
                        wrklog->indent(indent);
                    }
                    *wrklog << gammalib::parformat("Photon energy range", indent);
                    *wrklog << e_true_min << " - " << e_true_max << std::endl;
                    *wrklog << gammalib::parformat("Event energy range", indent);
                    *wrklog << emin << " - " << emax << std::endl;
                }

                // Loop over all sky models
                for (int i = 0; i < models.size(); ++i) {

                    // Get sky model (NULL if not a sky model)
                    const GModelSky* model =
                          dynamic_cast<const GModelSky*>(models[i]);

                    // If we have a sky model that applies to the present
                    // observation then simulate events
                    if (model != NULL &&
                        model->is_valid(obs->instrument(), obs->id())) {

                        // Determine duration of a time slice by limiting the
                        // number of simulated photons to m_max_photons.
                        // The photon rate is estimated from the model flux
                        // and used to set the duration of the time slice.
                        double flux     = get_model_flux(model, emin, emax,
                                                         dir, rad);
                        double rate     = flux * m_area;
                        double duration = 1800.0;  // default: 1800 sec
                        if (rate > 0.0) {
                            duration = m_max_photons / rate;
                            if (duration < 1.0) {  // not <1 sec
                                duration = 1.0;
                            }
                            else if (duration > 180000.0) { // not >50 hr
                                duration = 180000.0;
                            }
                        }
                        GTime tslice(duration, "sec");

                        // If photon rate exceeds the maximum photon rate
                        // then throw an exception
                        if (rate > m_max_rate) {
                            std::string modnam = (model->name().length() > 0) ?
                                                 model->name() : "Unknown";
                            std::string msg    = "Photon rate "+
                                                 gammalib::str(rate)+
                                                 " photons/sec for model \""+
                                                 modnam+"\" exceeds maximum"
                                                 " allowed photon rate of "+
                                                 gammalib::str(m_max_rate)+
                                                 " photons/sec. Please check"
                                                 " the model parameters for"
                                                 " model \""+modnam+"\" or"
                                                 " increase the value of the"
                                                 " hidden \"maxrate\""
                                                 " parameter.";
                            throw GException::invalid_value(G_SIMULATE_SOURCE, msg);
                        }

                        // Dump length of time slice and rate
                        if (logExplicit()) {
                            *wrklog << gammalib::parformat("Photon rate", indent);
                            *wrklog << rate << " photons/sec";
                            if (model->name().length() > 0) {
                                *wrklog << " [" << model->name() << "]";
                            }
                            *wrklog << std::endl;
                        }

                        // To reduce memory requirements we split long time
                        // intervals into several slices.
                        GTime tstart = tmin;
                        GTime tstop  = tstart + tslice;

                        // Initialise cumulative photon counters
                        int nphotons = 0;

                        // Loop over time slices
                        while (tstart < tmax) {

                            // Make sure that tstop <= tmax
                            if (tstop > tmax) {
                                tstop = tmax;
                            }

                            // Dump time slice
                            if (logExplicit()) {
                                if (tmax - tmin > tslice) {
                                    indent++;
                                    wrklog->indent(indent);
                                }
                                *wrklog << gammalib::parformat("Time slice", indent);
                                *wrklog << tstart.convert(m_cta_ref);
                                *wrklog << " - ";
                                *wrklog << tstop.convert(m_cta_ref);
                                *wrklog << " s";
                                if (model->name().length() > 0) {
                                    *wrklog << " [" << model->name() << "]";
                                }
                                *wrklog << std::endl;
                            }

                            // Get photons
                            GPhotons photons = model->mc(m_area, dir, rad,
                                                         e_true_min, e_true_max,
                                                         tstart, tstop, ran);

                            // Dump number of simulated photons
                            if (logExplicit()) {
                                *wrklog << gammalib::parformat("MC source photons/slice", indent);
                                *wrklog << photons.size();
                                if (model->name().length() > 0) {
                                    *wrklog << " [" << model->name() << "]";
                                }
                                *wrklog << std::endl;
                            }

                            // Simulate events from photons
                            for (int i = 0; i < photons.size(); ++i) {

                                // Increment photon counter
                                nphotons++;

                                // Simulate event. Note that this method
                                // includes the deadtime correction.
                                GCTAEventAtom* event = rsp->mc(m_area,
                                                               photons[i],
                                                               *obs,
                                                               ran);

                                if (event != NULL) {

                                    // Use event only if it falls within ROI
                                    // energy boundary and time slice
                                    if (events->roi().contains(*event) &&
                                        event->energy() >= emin &&
                                        event->energy() <= emax &&
                                        event->time() >= tstart &&
                                        event->time() <= tstop) {
                                        event->event_id(m_event_id);
                                        events->append(*event);
                                        m_event_id++;
                                    }
                                    delete event;
                                }

                            } // endfor: looped over events

                            // Go to next time slice
                            tstart = tstop;
                            tstop  = tstart + tslice;

                            // Reset indentation
                            if (logExplicit()) {
                                if (tmax - tmin > tslice) {
                                    indent--;
                                    wrklog->indent(indent);
                                }
                            }

                        } // endwhile: looped over time slices

                        // Dump simulation results
                        if (logNormal()) {
                            *wrklog << gammalib::parformat("MC source photons", indent);
                            *wrklog << nphotons;
                            if (model->name().length() > 0) {
                                *wrklog << " [" << model->name() << "]";
                            }
                            *wrklog << std::endl;
                            *wrklog << gammalib::parformat("MC source events", indent);
                            *wrklog << events->size();
                            if (model->name().length() > 0) {
                                *wrklog << " [" << model->name() << "]";
                            }
                            *wrklog << std::endl;

                        }

                    } // endif: model was a sky model

                } // endfor: looped over models

                // Dump simulation results
                if (logNormal()) {
                    *wrklog << gammalib::parformat("MC source events", indent);
                    *wrklog << events->size();
                    *wrklog << " (all source models)";
                    *wrklog << std::endl;
                }

                // Reset indentation
                if (logNormal()) {
                    if (events->ebounds().size() > 1) {
                        indent--;
                        wrklog->indent(indent);

                    }
                }

            } // endfor: looped over all energy boundaries

            // Reset indentation
            if (logNormal()) {
                if (events->gti().size() > 1) {
                    indent--;
                    wrklog->indent(indent);
                }
            }

        } // endfor: looped over all time intervals

        // Reset indentation
        wrklog->indent(0);

    } // endif: observation pointer was valid

    // Return
    return;
}
Exemplo n.º 4
0
/***********************************************************************//**
 * @brief Simulate source events from photon list
 *
 * @param[in] obs Pointer on CTA observation.
 * @param[in] models Model list.
 * @param[in] ran Random number generator.
 * @param[in] wrklog Pointer to logger.
 *
 * Simulate source events from a photon list for a given CTA observation.
 * The events are stored in as event list in the observation.
 *
 * This method does nothing if the observation pointer is NULL. It also
 * verifies if the observation has a valid pointing and response.
 ***************************************************************************/
void ctobssim::simulate_source(GCTAObservation* obs, const GModels& models,
                               GRan& ran, GLog* wrklog)
{
    // Continue only if observation pointer is valid
    if (obs != NULL) {

        // If no logger is specified then use the default logger
        if (wrklog == NULL) {
            wrklog = &log;
        }

        // Get pointer on CTA response. Throw an exception if the response
        // is not defined.
        const GCTAResponse& rsp = obs->response();

        // Make sure that the observation holds a CTA event list. If this
        // is not the case then allocate and attach a CTA event list now.
        if (dynamic_cast<const GCTAEventList*>(obs->events()) == NULL) {
            set_list(obs);
        }

        // Get pointer on event list (circumvent const correctness)
        GCTAEventList* events = static_cast<GCTAEventList*>(const_cast<GEvents*>(obs->events()));

        // Extract simulation region.
        GSkyDir dir = events->roi().centre().dir();
        double  rad = events->roi().radius() + g_roi_margin;

        // Dump simulation cone information
        if (logNormal()) {
            *wrklog << gammalib::parformat("Simulation area");
            *wrklog << m_area << " cm2" << std::endl;
            *wrklog << gammalib::parformat("Simulation cone");
            *wrklog << "RA=" << dir.ra_deg() << " deg";
            *wrklog << ", Dec=" << dir.dec_deg() << " deg";
            *wrklog << ", r=" << rad << " deg" << std::endl;
        }

        // Initialise indentation for logging
        int indent = 0;

        // Loop over all Good Time Intervals
        for (int it = 0; it < events->gti().size(); ++it) {

            // Extract time interval
            GTime tmin = events->gti().tstart(it);
            GTime tmax = events->gti().tstop(it);

            // Dump time interval
            if (logNormal()) {
                if (events->gti().size() > 1) {
                    indent++;
                    wrklog->indent(indent);
                }
                *wrklog << gammalib::parformat("Time interval", indent);
                *wrklog << tmin.convert(m_cta_ref);
                *wrklog << " - ";
                *wrklog << tmax.convert(m_cta_ref);
                *wrklog << " s" << std::endl;
            }

            // Loop over all energy boundaries
            for (int ie = 0; ie <  events->ebounds().size(); ++ie) {

                // Extract energy boundaries
                GEnergy emin = events->ebounds().emin(ie);
                GEnergy emax = events->ebounds().emax(ie);

                // Dump energy range
                if (logNormal()) {
                    if (events->ebounds().size() > 1) {
                        indent++;
                        wrklog->indent(indent);
                    }
                    *wrklog << gammalib::parformat("Energy range", indent);
                    *wrklog << emin << " - " << emax << std::endl;
                }

                // Loop over all sky models
                for (int i = 0; i < models.size(); ++i) {

                    // Get sky model (NULL if not a sky model)
                    const GModelSky* model =
                          dynamic_cast<const GModelSky*>(models[i]);

                    // If we have a sky model that applies to the present
                    // observation then simulate events
                    if (model != NULL &&
                        model->is_valid(obs->instrument(), obs->id())) {

                        // Determine duration of a time slice by limiting the
                        // number of simulated photons to m_max_photons.
                        // The photon rate is estimated from the model flux
                        // and used to set the duration of the time slice.
                        double flux     = model->spectral()->flux(emin, emax);
                        double rate     = flux * m_area;
                        double duration = 1800.0;  // default: 1800 sec
                        if (rate > 0.0) {
                            duration = m_max_photons / rate;
                            if (duration < 1.0) {  // not <1 sec
                                duration = 1.0;
                            }
                            else if (duration > 180000.0) { // not >50 hr
                                duration = 180000.0;
                            }
                        }
                        GTime tslice(duration, "sec");

                        // To reduce memory requirements we split long time
                        // intervals into several slices.
                        GTime tstart = tmin;
                        GTime tstop  = tstart + tslice;

                        // Initialise cumulative photon counters
                        int nphotons = 0;

                        // Loop over time slices
                        while (tstart < tmax) {

                            // Make sure that tstop <= tmax
                            if (tstop > tmax) {
                                tstop = tmax;
                            }

                            // Dump time slice
                            if (logExplicit()) {
                                if (tmax - tmin > tslice) {
                                    indent++;
                                    wrklog->indent(indent);
                                }
                                *wrklog << gammalib::parformat("Time slice", indent);
                                *wrklog << tstart.convert(m_cta_ref);
                                *wrklog << " - ";
                                *wrklog << tstop.convert(m_cta_ref);
                                *wrklog << " s" << std::endl;
                            }

                            // Get photons
                            GPhotons photons = model->mc(m_area, dir, rad,
                                                         emin, emax,
                                                         tstart, tstop, ran);

                            // Dump number of simulated photons
                            if (logExplicit()) {
                                *wrklog << gammalib::parformat("MC source photons/slice", indent);
                                *wrklog << photons.size();
                                if (model->name().length() > 0) {
                                    *wrklog << " [" << model->name() << "]";
                                }
                                *wrklog << std::endl;
                            }

                            // Simulate events from photons
                            for (int i = 0; i < photons.size(); ++i) {

                                // Increment photon counter
                                nphotons++;

                                // Simulate event. Note that this method
                                // includes the deadtime correction.
                                GCTAEventAtom* event = rsp.mc(m_area,
                                                              photons[i],
                                                              *obs,
                                                              ran);
                                if (event != NULL) {

                                    // Use event only if it falls within ROI
                                    if (events->roi().contains(*event)) {
                                        event->event_id(m_event_id);
                                        events->append(*event);
                                        m_event_id++;
                                    }
                                    delete event;
                                }

                            } // endfor: looped over events

                            // Go to next time slice
                            tstart = tstop;
                            tstop  = tstart + tslice;

                            // Reset indentation
                            if (logExplicit()) {
                                if (tmax - tmin > tslice) {
                                    indent--;
                                    wrklog->indent(indent);
                                }
                            }

                        } // endwhile: looped over time slices

                        // Dump simulation results
                        if (logNormal()) {
                            *wrklog << gammalib::parformat("MC source photons", indent);
                            *wrklog << nphotons;
                            if (model->name().length() > 0) {
                                *wrklog << " [" << model->name() << "]";
                            }
                            *wrklog << std::endl;
                            *wrklog << gammalib::parformat("MC source events", indent);
                            *wrklog << events->size();
                            if (model->name().length() > 0) {
                                *wrklog << " [" << model->name() << "]";
                            }
                            *wrklog << std::endl;

                        }

                    } // endif: model was a sky model

                } // endfor: looped over models

                // Dump simulation results
                if (logNormal()) {
                    *wrklog << gammalib::parformat("MC source events", indent);
                    *wrklog << events->size();
                    *wrklog << " (all source models)";
                    *wrklog << std::endl;
                }

                // Reset indentation
                if (logNormal()) {
                    if (events->ebounds().size() > 1) {
                        indent--;
                        wrklog->indent(indent);

                    }
                }

            } // endfor: looped over all energy boundaries

            // Reset indentation
            if (logNormal()) {
                if (events->gti().size() > 1) {
                    indent--;
                    wrklog->indent(indent);
                }
            }

        } // endfor: looped over all time intervals

        // Reset indentation
        wrklog->indent(0);

    } // endif: observation pointer was valid

    // Return
    return;
}
Exemplo n.º 5
0
/***********************************************************************//**
 * @brief Set empty CTA event list
 *
 * @param[in] obs CTA observation.
 *
 * Attaches an empty event list to CTA observation. The method also sets the
 * pointing direction using the m_ra and m_dec members, the ROI based on
 * m_ra, m_dec and m_rad, a single GTI based on m_tmin and m_tmax, and a
 * single energy boundary based on m_emin and m_emax. The method furthermore
 * sets the ontime, livetime and deadtime correction factor.
 ***************************************************************************/
void ctobssim::set_list(GCTAObservation* obs)
{
    // Continue only if observation is valid
    if (obs != NULL) {

        // Get CTA observation parameters
        m_ra    = (*this)["ra"].real();
        m_dec   = (*this)["dec"].real();
        m_rad   = (*this)["rad"].real();
        m_tmin  = (*this)["tmin"].real();
        m_tmax  = (*this)["tmax"].real();
        m_emin  = (*this)["emin"].real();
        m_emax  = (*this)["emax"].real();
        m_deadc = (*this)["deadc"].real();

        // Allocate CTA event list
        GCTAEventList events;

        // Set pointing direction
        GCTAPointing pnt;
        GSkyDir      skydir;
        skydir.radec_deg(m_ra, m_dec);
        pnt.dir(skydir);

        // Set ROI
        GCTAInstDir instdir(skydir);
        GCTARoi     roi(instdir, m_rad);

        // Set GTI
        GGti  gti(m_cta_ref);
        GTime tstart;
        GTime tstop;
        tstart.set(m_tmin, m_cta_ref);
        tstop.set(m_tmax, m_cta_ref);
        gti.append(tstart, tstop);

        // Set energy boundaries
        GEbounds ebounds;
        GEnergy  emin;
        GEnergy  emax;
        emin.TeV(m_emin);
        emax.TeV(m_emax);
        ebounds.append(emin, emax);

        // Set CTA event list attributes
        events.roi(roi);
        events.gti(gti);
        events.ebounds(ebounds);

        // Attach event list to CTA observation
        obs->events(events);

        // Set observation ontime, livetime and deadtime correction factor
        obs->ontime(gti.ontime());
        obs->livetime(gti.ontime()*m_deadc);
        obs->deadc(m_deadc);

    } // endif: oberservation was valid

    // Return
    return;
}
Exemplo n.º 6
0
/***********************************************************************//**
 * @brief Return simulated list of events
 *
 * @param[in] obs Observation.
 * @param[in] ran Random number generator.
 * @return Pointer to list of simulated events (needs to be de-allocated by
 *         client)
 *
 * @exception GException::invalid_argument
 *            Specified observation is not a CTA observation.
 *
 * Draws a sample of events from the background model using a Monte
 * Carlo simulation. The region of interest, the energy boundaries and the
 * good time interval for the sampling will be extracted from the observation
 * argument that is passed to the method. The method also requires a random
 * number generator of type GRan which is passed by reference, hence the
 * state of the random number generator will be changed by the method.
 *
 * The method also applies a deadtime correction using a Monte Carlo process,
 * taking into account temporal deadtime variations. For this purpose, the
 * method makes use of the time dependent GObservation::deadc method.
 *
 * For each event in the returned event list, the sky direction, the nominal
 * coordinates (DETX and DETY), the energy and the time will be set.
 ***************************************************************************/
GCTAEventList* GCTAModelAeffBackground::mc(const GObservation& obs,
                                           GRan& ran) const
{
    // Initialise new event list
    GCTAEventList* list = new GCTAEventList;

    // Continue only if model is valid)
    if (valid_model()) {

        // Retrieve CTA observation
        const GCTAObservation* cta = dynamic_cast<const GCTAObservation*>(&obs);
        if (cta == NULL) {
            std::string msg = "Specified observation is not a CTA "
                              "observation.\n" + obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Get pointer on CTA IRF response
        const GCTAResponseIrf* rsp =
              dynamic_cast<const GCTAResponseIrf*>(cta->response());
        if (rsp == NULL) {
            std::string msg = "Specified observation does not contain"
                              " an IRF response.\n" + obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Retrieve CTA response and pointing
        const GCTAPointing& pnt = cta->pointing();

        // Get pointer to CTA effective area
        const GCTAAeff* aeff = rsp->aeff();
        if (aeff == NULL) {
            std::string msg = "Specified observation contains no effective area"
                              " information.\n" + obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Retrieve event list to access the ROI, energy boundaries and GTIs
        const GCTAEventList* events =
              dynamic_cast<const GCTAEventList*>(obs.events());
        if (events == NULL) {
            std::string msg = "No CTA event list found in observation.\n" +
                              obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Get simulation region
        const GCTARoi&  roi     = events->roi();
        const GEbounds& ebounds = events->ebounds();
        const GGti&     gti     = events->gti();

        // Get maximum offset value for simulations
        double max_theta     = pnt.dir().dist(roi.centre().dir()) +
                               roi.radius() * gammalib::deg2rad;
        double cos_max_theta = std::cos(max_theta);

        // Set simulation region for result event list
        list->roi(roi);
        list->ebounds(ebounds);
        list->gti(gti);

        // Set up spectral model to draw random energies from. Here we use
        // a fixed energy sampling for an instance of GModelSpectralNodes.
        // This is analogous to to the GCTAModelIrfBackground::mc method.
        // We make sure that only non-negative nodes get appended.
        GEbounds spectral_ebounds =
            GEbounds(m_n_mc_energies, ebounds.emin(), ebounds.emax(), true);
        GModelSpectralNodes spectral;
        for (int i = 0; i < spectral_ebounds.size(); ++i) {
            GEnergy energy    = spectral_ebounds.elogmean(i);
            double  intensity = aeff_integral(obs, energy.log10TeV());
            double  norm      = m_spectral->eval(energy, events->tstart());
            double  arg       = norm * intensity;
            if (arg > 0.0) {
                spectral.append(energy, arg);
            }
        }

        // Loop over all energy bins
        for (int ieng = 0; ieng < ebounds.size(); ++ieng) {

            // Compute the background rate in model within the energy
            // boundaries from spectral component (units: cts/s).
            // Note that the time here is ontime. Deadtime correction will
            // be done later.
            double rate = spectral.flux(ebounds.emin(ieng), ebounds.emax(ieng));

            // Debug option: dump rate
            #if defined(G_DUMP_MC)
            std::cout << "GCTAModelAeffBackground::mc(\"" << name() << "\": ";
            std::cout << "rate=" << rate << " cts/s)" << std::endl;
            #endif

            // If the rate is not positive then skip this energy bins
            if (rate <= 0.0) {
                continue;
            }

            // Loop over all good time intervals
            for (int itime = 0; itime < gti.size(); ++itime) {

                // Get Monte Carlo event arrival times from temporal model
                GTimes times = m_temporal->mc(rate,
                                              gti.tstart(itime),
                                              gti.tstop(itime),
                                              ran);

                // Get number of events
                int n_events = times.size();

                // Reserve space for events
                if (n_events > 0) {
                    list->reserve(n_events);
                }

                // Debug option: provide number of times and initialize
                // statisics
                #if defined(G_DUMP_MC)
                std::cout << " Interval " << itime;
                std::cout << " times=" << n_events << std::endl;
                int n_killed_by_deadtime = 0;
                int n_killed_by_roi      = 0;
                #endif

                // Loop over events
                for (int i = 0; i < n_events; ++i) {

                    // Apply deadtime correction
                    double deadc = obs.deadc(times[i]);
                    if (deadc < 1.0) {
                        if (ran.uniform() > deadc) {
                            #if defined(G_DUMP_MC)
                            n_killed_by_deadtime++;
                            #endif
                            continue;
                        }
                    }

                    // Get Monte Carlo event energy from spectral model
                    GEnergy energy = spectral.mc(ebounds.emin(ieng),
                                                 ebounds.emax(ieng),
                                                 times[i],
                                                 ran);

                    // Get maximum effective area for rejection method
                    double max_aeff = aeff->max(energy.log10TeV(), pnt.zenith(),
                                                pnt.azimuth(), false);

                    // Skip event if the maximum effective area is not positive
                    if (max_aeff <= 0.0) {
                        continue;
                    }

                    // Initialise randomised coordinates
                    double offset = 0.0;
                    double phi    = 0.0;

                    // Initialise acceptance fraction and counter of zeros for
                    // rejection method
                    double acceptance_fraction = 0.0;
                    int    zeros               = 0;

                    // Start rejection method loop
                    do {

                        // Throw random offset and azimuth angle in
                        // considered range
                        offset = std::acos(1.0 - ran.uniform() *
                                           (1.0 - cos_max_theta));
                        phi    = ran.uniform() * gammalib::twopi;

                        // Compute function value at this offset angle
                        double value = (*aeff)(energy.log10TeV(), offset, phi,
                                               pnt.zenith(), pnt.azimuth(),
                                               false);

                        // If the value is not positive then increment the
                        // zeros counter and fall through. The counter assures
                        // that this loop does not lock up.
                        if (value <= 0.0) {
                            zeros++;
                            continue;
                        }

                        // Value is non-zero so reset the zeros counter
                        zeros = 0;

                        // Compute acceptance fraction
                        acceptance_fraction = value / max_aeff;
			
                    } while ((ran.uniform() > acceptance_fraction) &&
                             (zeros < 1000));

                    // If the zeros counter is non-zero then the loop was
                    // exited due to exhaustion and the event is skipped
                    if (zeros > 0) {
                        continue;
                    }

                    // Convert CTA pointing direction in instrument system
                    GCTAInstDir mc_dir(pnt.dir());

                    // Rotate pointing direction by offset and azimuth angle
                    mc_dir.dir().rotate_deg(phi    * gammalib::rad2deg,
                                            offset * gammalib::rad2deg);

                    // Compute DETX and DETY coordinates
                    double detx(0.0);
                    double dety(0.0);
                    if (offset > 0.0 ) {
                        detx = offset * std::cos(phi);
                        dety = offset * std::sin(phi);
                    }

                    // Set DETX and DETY coordinates
                    mc_dir.detx(detx);
                    mc_dir.dety(dety);

                    // Allocate event
                    GCTAEventAtom event;

                    // Set event attributes
                    event.dir(mc_dir);
                    event.energy(energy);
                    event.time(times[i]);

                    // Append event to list if it falls in ROI
                    if (events->roi().contains(event)) {
                        list->append(event);
                    }
                    #if defined(G_DUMP_MC)
                    else {
                        n_killed_by_roi++;
                    }
                    #endif

                } // endfor: looped over all events

                // Debug option: provide  statisics
                #if defined(G_DUMP_MC)
                std::cout << " Killed by deadtime=";
                std::cout << n_killed_by_deadtime << std::endl;
                std::cout << " Killed by ROI=";
                std::cout << n_killed_by_roi << std::endl;
                #endif

            } // endfor: looped over all GTIs

        } // endfor: looped over all energy boundaries

    } // endif: model was valid

    // Return
    return list;
}
Exemplo n.º 7
0
/***********************************************************************//**
 * @brief Return simulated list of events
 *
 * @param[in] obs Observation.
 * @param[in] ran Random number generator.
 * @return Pointer to list of simulated events (needs to be de-allocated by
 *         client)
 *
 * @exception GException::invalid_argument
 *            Specified observation is not a CTA observation.
 *
 * Draws a sample of events from the background model using a Monte
 * Carlo simulation. The region of interest, the energy boundaries and the
 * good time interval for the sampling will be extracted from the observation
 * argument that is passed to the method. The method also requires a random
 * number generator of type GRan which is passed by reference, hence the
 * state of the random number generator will be changed by the method.
 *
 * The method also applies a deadtime correction using a Monte Carlo process,
 * taking into account temporal deadtime variations. For this purpose, the
 * method makes use of the time dependent GObservation::deadc method.
 *
 * For each event in the returned event list, the sky direction, the nominal
 * coordinates (DETX and DETY), the energy and the time will be set.
 ***************************************************************************/
GCTAEventList* GCTAModelIrfBackground::mc(const GObservation& obs, GRan& ran) const
{
    // Initialise new event list
    GCTAEventList* list = new GCTAEventList;

    // Continue only if model is valid)
    if (valid_model()) {

        // Retrieve CTA observation
        const GCTAObservation* cta = dynamic_cast<const GCTAObservation*>(&obs);
        if (cta == NULL) {
            std::string msg = "Specified observation is not a CTA observation.\n" +
                              obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Get pointer on CTA IRF response
        const GCTAResponseIrf* rsp = dynamic_cast<const GCTAResponseIrf*>(cta->response());
        if (rsp == NULL) {
            std::string msg = "Specified observation does not contain"
                              " an IRF response.\n" + obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Retrieve CTA response and pointing
        const GCTAPointing& pnt = cta->pointing();

        // Get pointer to CTA background
        const GCTABackground* bgd = rsp->background();
        if (bgd == NULL) {
            std::string msg = "Specified observation contains no background"
                              " information.\n" + obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Retrieve event list to access the ROI, energy boundaries and GTIs
        const GCTAEventList* events = dynamic_cast<const GCTAEventList*>(obs.events());
        if (events == NULL) {
            std::string msg = "No CTA event list found in observation.\n" +
                              obs.print();
            throw GException::invalid_argument(G_MC, msg);
        }

        // Get simulation region
        const GCTARoi&  roi     = events->roi();
        const GEbounds& ebounds = events->ebounds();
        const GGti&     gti     = events->gti();

        // Set simulation region for result event list
        list->roi(roi);
        list->ebounds(ebounds);
        list->gti(gti);

        // Create a spectral model that combines the information from the
        // background information and the spectrum provided by the model
        GModelSpectralNodes spectral(bgd->spectrum());
        for (int i = 0; i < spectral.nodes(); ++i) {
            GEnergy energy    = spectral.energy(i);
            double  intensity = spectral.intensity(i);
            double  norm      = m_spectral->eval(energy, events->tstart());
            spectral.intensity(i, norm*intensity);
        }

        // Loop over all energy boundaries
        for (int ieng = 0; ieng < ebounds.size(); ++ieng) {

            // Compute the background rate in model within the energy
            // boundaries from spectral component (units: cts/s).
            // Note that the time here is ontime. Deadtime correction will
            // be done later.
            double rate = spectral.flux(ebounds.emin(ieng), ebounds.emax(ieng));

            // Debug option: dump rate
#if defined(G_DUMP_MC)
            std::cout << "GCTAModelIrfBackground::mc(\"" << name() << "\": ";
            std::cout << "rate=" << rate << " cts/s)" << std::endl;
#endif

            // Loop over all good time intervals
            for (int itime = 0; itime < gti.size(); ++itime) {

                // Get Monte Carlo event arrival times from temporal model
                GTimes times = m_temporal->mc(rate,
                                              gti.tstart(itime),
                                              gti.tstop(itime),
                                              ran);

                // Get number of events
                int n_events = times.size();

                // Reserve space for events
                if (n_events > 0) {
                    list->reserve(n_events);
                }

                // Debug option: provide number of times and initialize
                // statisics
#if defined(G_DUMP_MC)
                std::cout << " Interval " << itime;
                std::cout << " times=" << n_events << std::endl;
                int n_killed_by_deadtime = 0;
                int n_killed_by_roi      = 0;
#endif

                // Loop over events
                for (int i = 0; i < n_events; ++i) {

                    // Apply deadtime correction
                    double deadc = obs.deadc(times[i]);
                    if (deadc < 1.0) {
                        if (ran.uniform() > deadc) {
#if defined(G_DUMP_MC)
                            n_killed_by_deadtime++;
#endif
                            continue;
                        }
                    }

                    // Get Monte Carlo event energy from spectral model
                    GEnergy energy = spectral.mc(ebounds.emin(ieng),
                                                 ebounds.emax(ieng),
                                                 times[i],
                                                 ran);

                    // Get Monte Carlo event direction from spatial model.
                    // This only will set the DETX and DETY coordinates.
                    GCTAInstDir instdir = bgd->mc(energy, times[i], ran);

                    // Derive sky direction from instrument coordinates
                    GSkyDir skydir = pnt.skydir(instdir);

                    // Set sky direction in GCTAInstDir object
                    instdir.dir(skydir);

                    // Allocate event
                    GCTAEventAtom event;

                    // Set event attributes
                    event.dir(instdir);
                    event.energy(energy);
                    event.time(times[i]);

                    // Append event to list if it falls in ROI
                    if (events->roi().contains(event)) {
                        list->append(event);
                    }
#if defined(G_DUMP_MC)
                    else {
                        n_killed_by_roi++;
                    }
#endif

                } // endfor: looped over all events

                // Debug option: provide  statisics
#if defined(G_DUMP_MC)
                std::cout << " Killed by deadtime=";
                std::cout << n_killed_by_deadtime << std::endl;
                std::cout << " Killed by ROI=";
                std::cout << n_killed_by_roi << std::endl;
#endif

            } // endfor: looped over all GTIs

        } // endfor: looped over all energy boundaries

    } // endif: model was valid

    // Return
    return list;
}
Exemplo n.º 8
0
/***********************************************************************//**
 * @brief Select events
 *
 * @param[in] obs CTA observation.
 * @param[in] filename File name.
 *
 * Select events from a FITS file by making use of the selection possibility
 * of the cfitsio library on loading a file. A selection string is created
 * from the specified criteria that is appended to the filename so that
 * cfitsio will automatically filter the event data. This selection string
 * is then applied when opening the FITS file. The opened FITS file is then
 * saved into a temporary file which is the loaded into the actual CTA
 * observation, overwriting the old CTA observation. The ROI, GTI and EBounds
 * of the CTA event list are then set accordingly to the specified selection.
 * Finally, the temporary file created during this process is removed.
 *
 * Good Time Intervals of the observation will be limited to the time
 * interval [m_tmin, m_tmax]. If m_tmin=m_tmax=0, no time selection is
 * performed.
 *
 * @todo Use INDEF instead of 0.0 for pointing as RA/DEC selection
 ***************************************************************************/
void ctselect::select_events(GCTAObservation* obs, const std::string& filename)
{
    // Allocate selection string
    std::string selection;
    char        cmin[80];
    char        cmax[80];
    char        cra[80];
    char        cdec[80];
    char        crad[80];

    // Set requested selections
    bool select_time = (m_tmin != 0.0 || m_tmax != 0.0);

    // Set RA/DEC selection
    double ra  = m_ra;
    double dec = m_dec;
    if (m_usepnt) {
        const GCTAPointing *pnt = obs->pointing();
        ra = pnt->dir().ra_deg();
        dec = pnt->dir().dec_deg();
    }

    // Set time selection interval. We make sure here that the time selection
    // interval cannot be wider than the GTIs covering the data. This is done
    // using GGti's reduce() method.
    if (select_time) {

        // Reduce GTIs to specified time interval. The complicated cast is
        // necessary here because the gti() method is declared const, so
        // we're not officially allowed to modify the GTIs.
        ((GGti*)(&obs->events()->gti()))->reduce(m_timemin, m_timemax);

    } // endif: time selection was required

    // Save GTI for later usage
    GGti gti = obs->events()->gti();

    // Make time selection
    if (select_time) {
    
        // Extract effective time interval in CTA reference time. We need
        // this reference for filtering.
        double tmin = gti.tstart().convert(m_cta_ref);
        double tmax = gti.tstop().convert(m_cta_ref);

        // Format time with sufficient accuracy and add to selection string
        sprintf(cmin, "%.8f", tmin);
        sprintf(cmax, "%.8f", tmax);
        selection = "TIME >= "+std::string(cmin)+" && TIME <= "+std::string(cmax);
        if (logTerse()) {
            log << parformat("Time range");
            log << tmin << " - " << tmax << " s" << std::endl;
        }
        if (selection.length() > 0) {
            selection += " && ";
        }
    }

    // Make energy selection
    sprintf(cmin, "%.8f", m_emin);
    sprintf(cmax, "%.8f", m_emax);
    selection += "ENERGY >= "+std::string(cmin)+" && ENERGY <= "+std::string(cmax);
    if (logTerse()) {
        log << parformat("Energy range");
        log << m_emin << " - " << m_emax << " TeV" << std::endl;
    }
    if (selection.length() > 0) {
        selection += " && ";
    }

    // Make ROI selection
    sprintf(cra,  "%.6f", ra);
    sprintf(cdec, "%.6f", dec);
    sprintf(crad, "%.6f", m_rad);
    selection += "ANGSEP("+std::string(cra)+"," +
                 std::string(cdec)+",RA,DEC) <= " +
                 std::string(crad);
    if (logTerse()) {
        log << parformat("Acceptance cone centre");
        log << "RA=" << ra << ", DEC=" << dec << " deg" << std::endl;
        log << parformat("Acceptance cone radius");
        log << m_rad << " deg" << std::endl;
    }
    if (logTerse()) {
        log << parformat("cfitsio selection");
        log << selection << std::endl;
    }

    // Add additional expression
    if (strip_whitespace(m_expr).length() > 0) {
        if (selection.length() > 0) {
            selection += " && ";
        }
        selection += "("+strip_whitespace(m_expr)+")";
    }

    // Build input filename including selection expression
    std::string expression = filename;
    if (selection.length() > 0)
        expression += "[EVENTS]["+selection+"]";
    if (logTerse()) {
        log << parformat("FITS filename");
        log << expression << std::endl;
    }

    // Open FITS file
    GFits file(expression);

    // Log selected FITS file
    if (logExplicit()) {
        log << std::endl;
        log.header1("FITS file content after selection");
        log << file << std::endl;
    }

    // Check if we have an EVENTS HDU
    if (!file.hashdu("EVENTS")) {
        std::string message = "No \"EVENTS\" extension found in FITS file "+
                              expression+".";
        throw GException::app_error(G_SELECT_EVENTS, message);
    }

    // Determine number of events in EVENTS HDU
    int nevents = file.table("EVENTS")->nrows();

    // If the selected event list is empty then append an empty event list
    // to the observation. Otherwise load the data from the temporary file.
    if (nevents < 1) {

        // Create empty event list
        GCTAEventList eventlist;

        // Append list to observation
        obs->events(&eventlist);

    }
    else {

        // Get temporary file name
        std::string tmpname = std::tmpnam(NULL);

        // Save FITS file to temporary file
        file.saveto(tmpname, true);

        // Load observation from temporary file
        obs->load_unbinned(tmpname);

        // Remove temporary file
        std::remove(tmpname.c_str());

    }

    // Get CTA event list pointer
    GCTAEventList* list =
        static_cast<GCTAEventList*>(const_cast<GEvents*>(obs->events()));

    // Set ROI
    GCTARoi     roi;
    GCTAInstDir instdir;
    instdir.radec_deg(ra, dec);
    roi.centre(instdir);
    roi.radius(m_rad);
    list->roi(roi);

    // Set GTI
    list->gti(gti);

    // Set energy boundaries
    GEbounds ebounds;
    GEnergy  emin;
    GEnergy  emax;
    emin.TeV(m_emin);
    emax.TeV(m_emax);
    ebounds.append(emin, emax);
    list->ebounds(ebounds);

    // Recompute ontime and livetime.
    GTime meantime = 0.5 * (gti.tstart() + gti.tstop());
    obs->ontime(gti.ontime());
    obs->livetime(gti.ontime() * obs->deadc(meantime));

    // Return
    return;
}