ExceptionInfo* EvalExecutable::reparseExceptionInfo(AJGlobalData* globalData, ScopeChainNode* scopeChainNode, CodeBlock* codeBlock)
{
RefPtr<EvalNode> newEvalBody = globalData->parser->parse<EvalNode>(globalData, 0, 0, m_source);
ScopeChain scopeChain(scopeChainNode);
AJGlobalObject* globalObject = scopeChain.globalObject();
OwnPtr<EvalCodeBlock> newCodeBlock(new EvalCodeBlock(this, globalObject, source().provider(), scopeChain.localDepth()));
OwnPtr<BytecodeGenerator> generator(new BytecodeGenerator(newEvalBody.get(), globalObject->debugger(), scopeChain, newCodeBlock->symbolTable(), newCodeBlock.get()));
generator->setRegeneratingForExceptionInfo(static_cast<EvalCodeBlock*>(codeBlock));
generator->generate();
ASSERT(newCodeBlock->instructionCount() == codeBlock->instructionCount());
#if ENABLE(JIT)
#if ENABLE(INTERPRETER)
if (globalData->canUseJIT())
#endif
{
JITCode newJITCode = JIT::compile(globalData, newCodeBlock.get(), generatedJITCode().start());
ASSERT(newJITCode.size() == generatedJITCode().size());
}
#endif
return newCodeBlock->extractExceptionInfo();
}
ExceptionInfo* FunctionExecutable::reparseExceptionInfo(AJGlobalData* globalData, ScopeChainNode* scopeChainNode, CodeBlock* codeBlock)
{
RefPtr<FunctionBodyNode> newFunctionBody = globalData->parser->parse<FunctionBodyNode>(globalData, 0, 0, m_source);
if (m_forceUsesArguments)
newFunctionBody->setUsesArguments();
newFunctionBody->finishParsing(m_parameters, m_name);
ScopeChain scopeChain(scopeChainNode);
AJGlobalObject* globalObject = scopeChain.globalObject();
OwnPtr<CodeBlock> newCodeBlock(new FunctionCodeBlock(this, FunctionCode, source().provider(), source().startOffset()));
globalData->functionCodeBlockBeingReparsed = newCodeBlock.get();
OwnPtr<BytecodeGenerator> generator(new BytecodeGenerator(newFunctionBody.get(), globalObject->debugger(), scopeChain, newCodeBlock->symbolTable(), newCodeBlock.get()));
generator->setRegeneratingForExceptionInfo(static_cast<FunctionCodeBlock*>(codeBlock));
generator->generate();
ASSERT(newCodeBlock->instructionCount() == codeBlock->instructionCount());
#if ENABLE(JIT)
#if ENABLE(INTERPRETER)
if (globalData->canUseJIT())
#endif
{
JITCode newJITCode = JIT::compile(globalData, newCodeBlock.get(), generatedJITCode().start());
ASSERT(newJITCode.size() == generatedJITCode().size());
}
#endif
globalData->functionCodeBlockBeingReparsed = 0;
return newCodeBlock->extractExceptionInfo();
}
void StackIterator::Frame::print(int indentLevel)
{
int i = indentLevel;
if (!this->callFrame()) {
printif(i, "frame 0x0\n");
return;
}
CodeBlock* codeBlock = this->codeBlock();
printif(i, "frame %p {\n", this->callFrame());
CallFrame* callFrame = m_callFrame;
CallFrame* callerFrame = this->callerFrame();
void* returnPC = callFrame->hasReturnPC() ? callFrame->returnPC().value() : 0;
printif(i, " name '%s'\n", functionName().utf8().data());
printif(i, " sourceURL '%s'\n", sourceURL().utf8().data());
printif(i, " hostFlag %d\n", callerFrame->hasHostCallFrameFlag());
#if ENABLE(DFG_JIT)
printif(i, " isInlinedFrame %d\n", isInlinedFrame());
if (isInlinedFrame())
printif(i, " InlineCallFrame %p\n", m_inlineCallFrame);
#endif
printif(i, " callee %p\n", callee());
printif(i, " returnPC %p\n", returnPC);
printif(i, " callerFrame %p\n", callerFrame->removeHostCallFrameFlag());
unsigned locationRawBits = callFrame->locationAsRawBits();
printif(i, " rawLocationBits %u 0x%x\n", locationRawBits, locationRawBits);
printif(i, " codeBlock %p\n", codeBlock);
if (codeBlock) {
JITCode::JITType jitType = codeBlock->jitType();
if (callFrame->hasLocationAsBytecodeOffset()) {
unsigned bytecodeOffset = callFrame->locationAsBytecodeOffset();
printif(i, " bytecodeOffset %u %p / %zu\n", bytecodeOffset, reinterpret_cast<void*>(bytecodeOffset), codeBlock->instructions().size());
#if ENABLE(DFG_JIT)
} else {
unsigned codeOriginIndex = callFrame->locationAsCodeOriginIndex();
printif(i, " codeOriginIdex %u %p / %zu\n", codeOriginIndex, reinterpret_cast<void*>(codeOriginIndex), codeBlock->codeOrigins().size());
#endif
}
unsigned line = 0;
unsigned column = 0;
computeLineAndColumn(line, column);
printif(i, " line %d\n", line);
printif(i, " column %d\n", column);
printif(i, " jitType %d <%s> isOptimizingJIT %d\n", jitType, jitTypeName(jitType), JITCode::isOptimizingJIT(jitType));
#if ENABLE(DFG_JIT)
printif(i, " hasCodeOrigins %d\n", codeBlock->hasCodeOrigins());
if (codeBlock->hasCodeOrigins()) {
JITCode* jitCode = codeBlock->jitCode().get();
printif(i, " jitCode %p start %p end %p\n", jitCode, jitCode->start(), jitCode->end());
}
#endif
}
printif(i, "}\n");
}
char* JIT_OPERATION triggerOSREntryNow(
ExecState* exec, int32_t bytecodeIndex, int32_t streamIndex)
{
VM* vm = &exec->vm();
NativeCallFrameTracer tracer(vm, exec);
DeferGC deferGC(vm->heap);
CodeBlock* codeBlock = exec->codeBlock();
if (codeBlock->jitType() != JITCode::DFGJIT) {
dataLog("Unexpected code block in DFG->FTL tier-up: ", *codeBlock, "\n");
RELEASE_ASSERT_NOT_REACHED();
}
JITCode* jitCode = codeBlock->jitCode()->dfg();
if (Options::verboseOSR()) {
dataLog(
*codeBlock, ": Entered triggerOSREntryNow with executeCounter = ",
jitCode->tierUpCounter, "\n");
}
// - If we don't have an FTL code block, then try to compile one.
// - If we do have an FTL code block, then try to enter for a while.
// - If we couldn't enter for a while, then trigger OSR entry.
triggerFTLReplacementCompile(vm, codeBlock, jitCode);
if (!codeBlock->hasOptimizedReplacement())
return 0;
if (jitCode->osrEntryRetry < Options::ftlOSREntryRetryThreshold()) {
jitCode->osrEntryRetry++;
return 0;
}
// It's time to try to compile code for OSR entry.
Worklist::State worklistState;
if (Worklist* worklist = existingGlobalFTLWorklistOrNull()) {
worklistState = worklist->completeAllReadyPlansForVM(
*vm, CompilationKey(codeBlock->baselineVersion(), FTLForOSREntryMode));
} else
worklistState = Worklist::NotKnown;
if (worklistState == Worklist::Compiling)
return 0;
if (CodeBlock* entryBlock = jitCode->osrEntryBlock.get()) {
void* address = FTL::prepareOSREntry(
exec, codeBlock, entryBlock, bytecodeIndex, streamIndex);
if (address)
return static_cast<char*>(address);
FTL::ForOSREntryJITCode* entryCode = entryBlock->jitCode()->ftlForOSREntry();
entryCode->countEntryFailure();
if (entryCode->entryFailureCount() <
Options::ftlOSREntryFailureCountForReoptimization())
return 0;
// OSR entry failed. Oh no! This implies that we need to retry. We retry
// without exponential backoff and we only do this for the entry code block.
jitCode->osrEntryBlock.clear();
jitCode->osrEntryRetry = 0;
return 0;
}
if (worklistState == Worklist::Compiled) {
// This means that compilation failed and we already set the thresholds.
if (Options::verboseOSR())
dataLog("Code block ", *codeBlock, " was compiled but it doesn't have an optimized replacement.\n");
return 0;
}
// We aren't compiling and haven't compiled anything for OSR entry. So, try to compile
// something.
Operands<JSValue> mustHandleValues;
jitCode->reconstruct(
exec, codeBlock, CodeOrigin(bytecodeIndex), streamIndex, mustHandleValues);
RefPtr<CodeBlock> replacementCodeBlock = codeBlock->newReplacement();
CompilationResult forEntryResult = compile(
*vm, replacementCodeBlock.get(), codeBlock, FTLForOSREntryMode, bytecodeIndex,
mustHandleValues, ToFTLForOSREntryDeferredCompilationCallback::create(codeBlock));
if (forEntryResult != CompilationSuccessful) {
ASSERT(forEntryResult == CompilationDeferred || replacementCodeBlock->hasOneRef());
return 0;
}
// It's possible that the for-entry compile already succeeded. In that case OSR
// entry will succeed unless we ran out of stack. It's not clear what we should do.
// We signal to try again after a while if that happens.
void* address = FTL::prepareOSREntry(
exec, codeBlock, jitCode->osrEntryBlock.get(), bytecodeIndex, streamIndex);
return static_cast<char*>(address);
}
SUPPRESS_ASAN
void* prepareOSREntry(ExecState* exec, CodeBlock* codeBlock, unsigned bytecodeIndex)
{
ASSERT(JITCode::isOptimizingJIT(codeBlock->jitType()));
ASSERT(codeBlock->alternative());
ASSERT(codeBlock->alternative()->jitType() == JITCode::BaselineJIT);
ASSERT(!codeBlock->jitCodeMap());
if (!Options::useOSREntryToDFG())
return 0;
if (Options::verboseOSR()) {
dataLog(
"DFG OSR in ", *codeBlock->alternative(), " -> ", *codeBlock,
" from bc#", bytecodeIndex, "\n");
}
VM* vm = &exec->vm();
sanitizeStackForVM(vm);
if (bytecodeIndex)
codeBlock->ownerScriptExecutable()->setDidTryToEnterInLoop(true);
if (codeBlock->jitType() != JITCode::DFGJIT) {
RELEASE_ASSERT(codeBlock->jitType() == JITCode::FTLJIT);
// When will this happen? We could have:
//
// - An exit from the FTL JIT into the baseline JIT followed by an attempt
// to reenter. We're fine with allowing this to fail. If it happens
// enough we'll just reoptimize. It basically means that the OSR exit cost
// us dearly and so reoptimizing is the right thing to do.
//
// - We have recursive code with hot loops. Consider that foo has a hot loop
// that calls itself. We have two foo's on the stack, lets call them foo1
// and foo2, with foo1 having called foo2 from foo's hot loop. foo2 gets
// optimized all the way into the FTL. Then it returns into foo1, and then
// foo1 wants to get optimized. It might reach this conclusion from its
// hot loop and attempt to OSR enter. And we'll tell it that it can't. It
// might be worth addressing this case, but I just think this case will
// be super rare. For now, if it does happen, it'll cause some compilation
// thrashing.
if (Options::verboseOSR())
dataLog(" OSR failed because the target code block is not DFG.\n");
return 0;
}
JITCode* jitCode = codeBlock->jitCode()->dfg();
OSREntryData* entry = jitCode->osrEntryDataForBytecodeIndex(bytecodeIndex);
if (!entry) {
if (Options::verboseOSR())
dataLogF(" OSR failed because the entrypoint was optimized out.\n");
return 0;
}
ASSERT(entry->m_bytecodeIndex == bytecodeIndex);
// The code below checks if it is safe to perform OSR entry. It may find
// that it is unsafe to do so, for any number of reasons, which are documented
// below. If the code decides not to OSR then it returns 0, and it's the caller's
// responsibility to patch up the state in such a way as to ensure that it's
// both safe and efficient to continue executing baseline code for now. This
// should almost certainly include calling either codeBlock->optimizeAfterWarmUp()
// or codeBlock->dontOptimizeAnytimeSoon().
// 1) Verify predictions. If the predictions are inconsistent with the actual
// values, then OSR entry is not possible at this time. It's tempting to
// assume that we could somehow avoid this case. We can certainly avoid it
// for first-time loop OSR - that is, OSR into a CodeBlock that we have just
// compiled. Then we are almost guaranteed that all of the predictions will
// check out. It would be pretty easy to make that a hard guarantee. But
// then there would still be the case where two call frames with the same
// baseline CodeBlock are on the stack at the same time. The top one
// triggers compilation and OSR. In that case, we may no longer have
// accurate value profiles for the one deeper in the stack. Hence, when we
// pop into the CodeBlock that is deeper on the stack, we might OSR and
// realize that the predictions are wrong. Probably, in most cases, this is
// just an anomaly in the sense that the older CodeBlock simply went off
// into a less-likely path. So, the wisest course of action is to simply not
// OSR at this time.
for (size_t argument = 0; argument < entry->m_expectedValues.numberOfArguments(); ++argument) {
if (argument >= exec->argumentCountIncludingThis()) {
if (Options::verboseOSR()) {
dataLogF(" OSR failed because argument %zu was not passed, expected ", argument);
entry->m_expectedValues.argument(argument).dump(WTF::dataFile());
dataLogF(".\n");
}
return 0;
}
JSValue value;
if (!argument)
value = exec->thisValue();
else
value = exec->argument(argument - 1);
if (!entry->m_expectedValues.argument(argument).validate(value)) {
if (Options::verboseOSR()) {
dataLog(
" OSR failed because argument ", argument, " is ", value,
", expected ", entry->m_expectedValues.argument(argument), ".\n");
}
return 0;
}
}
for (size_t local = 0; local < entry->m_expectedValues.numberOfLocals(); ++local) {
int localOffset = virtualRegisterForLocal(local).offset();
if (entry->m_localsForcedDouble.get(local)) {
if (!exec->registers()[localOffset].asanUnsafeJSValue().isNumber()) {
if (Options::verboseOSR()) {
dataLog(
" OSR failed because variable ", localOffset, " is ",
exec->registers()[localOffset].asanUnsafeJSValue(), ", expected number.\n");
}
return 0;
}
continue;
}
if (entry->m_localsForcedAnyInt.get(local)) {
if (!exec->registers()[localOffset].asanUnsafeJSValue().isAnyInt()) {
if (Options::verboseOSR()) {
dataLog(
" OSR failed because variable ", localOffset, " is ",
exec->registers()[localOffset].asanUnsafeJSValue(), ", expected ",
"machine int.\n");
}
return 0;
}
continue;
}
if (!entry->m_expectedValues.local(local).validate(exec->registers()[localOffset].asanUnsafeJSValue())) {
if (Options::verboseOSR()) {
dataLog(
" OSR failed because variable ", localOffset, " is ",
exec->registers()[localOffset].asanUnsafeJSValue(), ", expected ",
entry->m_expectedValues.local(local), ".\n");
}
return 0;
}
}
// 2) Check the stack height. The DFG JIT may require a taller stack than the
// baseline JIT, in some cases. If we can't grow the stack, then don't do
// OSR right now. That's the only option we have unless we want basic block
// boundaries to start throwing RangeErrors. Although that would be possible,
// it seems silly: you'd be diverting the program to error handling when it
// would have otherwise just kept running albeit less quickly.
unsigned frameSizeForCheck = jitCode->common.requiredRegisterCountForExecutionAndExit();
if (!vm->interpreter->stack().ensureCapacityFor(&exec->registers()[virtualRegisterForLocal(frameSizeForCheck - 1).offset()])) {
if (Options::verboseOSR())
dataLogF(" OSR failed because stack growth failed.\n");
return 0;
}
if (Options::verboseOSR())
dataLogF(" OSR should succeed.\n");
// At this point we're committed to entering. We will do some work to set things up,
// but we also rely on our caller recognizing that when we return a non-null pointer,
// that means that we're already past the point of no return and we must succeed at
// entering.
// 3) Set up the data in the scratch buffer and perform data format conversions.
unsigned frameSize = jitCode->common.frameRegisterCount;
unsigned baselineFrameSize = entry->m_expectedValues.numberOfLocals();
unsigned maxFrameSize = std::max(frameSize, baselineFrameSize);
Register* scratch = bitwise_cast<Register*>(vm->scratchBufferForSize(sizeof(Register) * (2 + JSStack::CallFrameHeaderSize + maxFrameSize))->dataBuffer());
*bitwise_cast<size_t*>(scratch + 0) = frameSize;
void* targetPC = codeBlock->jitCode()->executableAddressAtOffset(entry->m_machineCodeOffset);
if (Options::verboseOSR())
dataLogF(" OSR using target PC %p.\n", targetPC);
RELEASE_ASSERT(targetPC);
*bitwise_cast<void**>(scratch + 1) = targetPC;
Register* pivot = scratch + 2 + JSStack::CallFrameHeaderSize;
for (int index = -JSStack::CallFrameHeaderSize; index < static_cast<int>(baselineFrameSize); ++index) {
VirtualRegister reg(-1 - index);
if (reg.isLocal()) {
if (entry->m_localsForcedDouble.get(reg.toLocal())) {
*bitwise_cast<double*>(pivot + index) = exec->registers()[reg.offset()].asanUnsafeJSValue().asNumber();
continue;
}
if (entry->m_localsForcedAnyInt.get(reg.toLocal())) {
*bitwise_cast<int64_t*>(pivot + index) = exec->registers()[reg.offset()].asanUnsafeJSValue().asAnyInt() << JSValue::int52ShiftAmount;
continue;
}
}
pivot[index] = exec->registers()[reg.offset()].asanUnsafeJSValue();
}
// 4) Reshuffle those registers that need reshuffling.
Vector<JSValue> temporaryLocals(entry->m_reshufflings.size());
for (unsigned i = entry->m_reshufflings.size(); i--;)
temporaryLocals[i] = pivot[VirtualRegister(entry->m_reshufflings[i].fromOffset).toLocal()].asanUnsafeJSValue();
for (unsigned i = entry->m_reshufflings.size(); i--;)
pivot[VirtualRegister(entry->m_reshufflings[i].toOffset).toLocal()] = temporaryLocals[i];
// 5) Clear those parts of the call frame that the DFG ain't using. This helps GC on
// some programs by eliminating some stale pointer pathologies.
for (unsigned i = frameSize; i--;) {
if (entry->m_machineStackUsed.get(i))
continue;
pivot[i] = JSValue();
}
// 6) Copy our callee saves to buffer.
#if NUMBER_OF_CALLEE_SAVES_REGISTERS > 0
RegisterAtOffsetList* registerSaveLocations = codeBlock->calleeSaveRegisters();
RegisterAtOffsetList* allCalleeSaves = vm->getAllCalleeSaveRegisterOffsets();
RegisterSet dontSaveRegisters = RegisterSet(RegisterSet::stackRegisters(), RegisterSet::allFPRs());
unsigned registerCount = registerSaveLocations->size();
VMEntryRecord* record = vmEntryRecord(vm->topVMEntryFrame);
for (unsigned i = 0; i < registerCount; i++) {
RegisterAtOffset currentEntry = registerSaveLocations->at(i);
if (dontSaveRegisters.get(currentEntry.reg()))
continue;
RegisterAtOffset* calleeSavesEntry = allCalleeSaves->find(currentEntry.reg());
*(bitwise_cast<intptr_t*>(pivot - 1) - currentEntry.offsetAsIndex()) = record->calleeSaveRegistersBuffer[calleeSavesEntry->offsetAsIndex()];
}
#endif
// 7) Fix the call frame to have the right code block.
*bitwise_cast<CodeBlock**>(pivot - 1 - JSStack::CodeBlock) = codeBlock;
if (Options::verboseOSR())
dataLogF(" OSR returning data buffer %p.\n", scratch);
return scratch;
}
void StackVisitor::Frame::dump(PrintStream& out, Indenter indent, WTF::Function<void(PrintStream&)> prefix) const
{
if (!this->callFrame()) {
out.print(indent, "frame 0x0\n");
return;
}
CodeBlock* codeBlock = this->codeBlock();
out.print(indent);
prefix(out);
out.print("frame ", RawPointer(this->callFrame()), " {\n");
{
indent++;
CallFrame* callFrame = m_callFrame;
CallFrame* callerFrame = this->callerFrame();
const void* returnPC = callFrame->hasReturnPC() ? callFrame->returnPC().value() : nullptr;
out.print(indent, "name: ", functionName(), "\n");
out.print(indent, "sourceURL: ", sourceURL(), "\n");
bool isInlined = false;
#if ENABLE(DFG_JIT)
isInlined = isInlinedFrame();
out.print(indent, "isInlinedFrame: ", isInlinedFrame(), "\n");
if (isInlinedFrame())
out.print(indent, "InlineCallFrame: ", RawPointer(m_inlineCallFrame), "\n");
#endif
out.print(indent, "callee: ", RawPointer(callee().rawPtr()), "\n");
out.print(indent, "returnPC: ", RawPointer(returnPC), "\n");
out.print(indent, "callerFrame: ", RawPointer(callerFrame), "\n");
uintptr_t locationRawBits = callFrame->callSiteAsRawBits();
out.print(indent, "rawLocationBits: ", locationRawBits,
" ", RawPointer(reinterpret_cast<void*>(locationRawBits)), "\n");
out.print(indent, "codeBlock: ", RawPointer(codeBlock));
if (codeBlock)
out.print(" ", *codeBlock);
out.print("\n");
if (codeBlock && !isInlined) {
indent++;
if (callFrame->callSiteBitsAreBytecodeOffset()) {
unsigned bytecodeOffset = callFrame->bytecodeOffset();
out.print(indent, "bytecodeOffset: ", bytecodeOffset, " of ", codeBlock->instructions().size(), "\n");
#if ENABLE(DFG_JIT)
} else {
out.print(indent, "hasCodeOrigins: ", codeBlock->hasCodeOrigins(), "\n");
if (codeBlock->hasCodeOrigins()) {
CallSiteIndex callSiteIndex = callFrame->callSiteIndex();
out.print(indent, "callSiteIndex: ", callSiteIndex.bits(), " of ", codeBlock->codeOrigins().size(), "\n");
JITCode::JITType jitType = codeBlock->jitType();
if (jitType != JITCode::FTLJIT) {
JITCode* jitCode = codeBlock->jitCode().get();
out.print(indent, "jitCode: ", RawPointer(jitCode),
" start ", RawPointer(jitCode->start()),
" end ", RawPointer(jitCode->end()), "\n");
}
}
#endif
}
unsigned line = 0;
unsigned column = 0;
computeLineAndColumn(line, column);
out.print(indent, "line: ", line, "\n");
out.print(indent, "column: ", column, "\n");
indent--;
}
out.print(indent, "EntryFrame: ", RawPointer(m_entryFrame), "\n");
indent--;
}
out.print(indent, "}\n");
}
void StackVisitor::Frame::print(int indent)
{
if (!this->callFrame()) {
log(indent, "frame 0x0\n");
return;
}
CodeBlock* codeBlock = this->codeBlock();
logF(indent, "frame %p {\n", this->callFrame());
{
indent++;
CallFrame* callFrame = m_callFrame;
CallFrame* callerFrame = this->callerFrame();
void* returnPC = callFrame->hasReturnPC() ? callFrame->returnPC().value() : nullptr;
log(indent, "name: ", functionName(), "\n");
log(indent, "sourceURL: ", sourceURL(), "\n");
bool isInlined = false;
#if ENABLE(DFG_JIT)
isInlined = isInlinedFrame();
log(indent, "isInlinedFrame: ", isInlinedFrame(), "\n");
if (isInlinedFrame())
logF(indent, "InlineCallFrame: %p\n", m_inlineCallFrame);
#endif
logF(indent, "callee: %p\n", callee());
logF(indent, "returnPC: %p\n", returnPC);
logF(indent, "callerFrame: %p\n", callerFrame);
unsigned locationRawBits = callFrame->callSiteAsRawBits();
logF(indent, "rawLocationBits: %u 0x%x\n", locationRawBits, locationRawBits);
logF(indent, "codeBlock: %p ", codeBlock);
if (codeBlock)
dataLog(*codeBlock);
dataLog("\n");
if (codeBlock && !isInlined) {
indent++;
if (callFrame->callSiteBitsAreBytecodeOffset()) {
unsigned bytecodeOffset = callFrame->bytecodeOffset();
log(indent, "bytecodeOffset: ", bytecodeOffset, " of ", codeBlock->instructions().size(), "\n");
#if ENABLE(DFG_JIT)
} else {
log(indent, "hasCodeOrigins: ", codeBlock->hasCodeOrigins(), "\n");
if (codeBlock->hasCodeOrigins()) {
CallSiteIndex callSiteIndex = callFrame->callSiteIndex();
log(indent, "callSiteIndex: ", callSiteIndex.bits(), " of ", codeBlock->codeOrigins().size(), "\n");
JITCode::JITType jitType = codeBlock->jitType();
if (jitType != JITCode::FTLJIT) {
JITCode* jitCode = codeBlock->jitCode().get();
logF(indent, "jitCode: %p start %p end %p\n", jitCode, jitCode->start(), jitCode->end());
}
}
#endif
}
unsigned line = 0;
unsigned column = 0;
computeLineAndColumn(line, column);
log(indent, "line: ", line, "\n");
log(indent, "column: ", column, "\n");
indent--;
}
indent--;
}
log(indent, "}\n");
}
