void CalibrationRecorder::processImage () {
lastMarkerValid=false;
double sensitivity = (static_cast<double>(panel->sensitivity)+100.0)/100.0;
RGBTuple red = { 255,0,0 };
RGBTuple green = { 0,255,0 };
RGBTuple yellow = { 255,255,0 };
RGBTuple blue = { 0,0,255 };
Painter paint (*image);
switch (mode) {
case redScreen:
setPixelsetAll (*regionBefore, image->getWidth(), image->getHeight());
regionAfter->clear();
findReddishPixels (*regionAfter, *image, sensitivity);
drawPixelset (*image, *regionAfter, yellow);
break;
case greenScreen:
regionWork->clear();
regionAfter->clear();
findGreenishPixels (*regionWork, *image, sensitivity);
intersectSortedSets (*regionAfter, *regionBefore, *regionWork);
drawPixelset (*image, *regionAfter, yellow);
break;
case blueScreen:
regionWork->clear();
regionAfter->clear();
findBluishPixels (*regionWork, *image, sensitivity);
intersectSortedSets (*regionAfter, *regionBefore, *regionWork);
drawPixelset (*image, *regionAfter, yellow);
break;
case redMarker:
regionWork->clear();
regionAfter->clear();
findReddishPixels (*regionWork, *image, sensitivity);
intersectSortedSets (*regionAfter, *regionBefore, *regionWork);
drawPixelset (*image, *regionAfter, yellow);
gravityCenter = centerOfGravity (*regionAfter);
if (gravityCenter.x==0 && gravityCenter.y==0)
gravityCenter=Vec(-1000,-1000); // fuer den Fall dass kein roter Bereich gefunden wurde
paint.setColor (blue);
paint.markCrosshair (static_cast<int>(gravityCenter.x+0.5), static_cast<int>(gravityCenter.y+0.5), 10);
break;
case blackMarker:
{
GrayLevelImage ggsrc (*image);
std::deque<std::deque<ImageCoordinate> > lines;
std::deque<std::deque<ImageCoordinate> > linesC;
canny (lines, ggsrc, 5, 6, 20);
for (unsigned int i=0; i<lines.size(); i++) {
deque<unsigned int> breakpoints;
breakLine (breakpoints, lines[i]);
deque<deque<ImageCoordinate> > lines2;
splitLineSorted (lines2, lines[i], breakpoints);
for (unsigned int j=0; j<lines2.size(); j++) {
if (lines2[j].size()>5) {
deque<ImageCoordinate>::iterator it1=lines2[j].begin();
deque<ImageCoordinate>::iterator it2=lines2[j].end();
if (isAround (gravityCenter, 50, it1, it2)) {
deque<ImageCoordinate> nl;
linesC.push_back (nl);
linesC.back().assign (it1, it2);
}
}
}
}
if (linesC.size()>=4) {
sort (linesC.begin(), linesC.end(), linelencomp);
// beste Kombination der 4 Linien suchen
unsigned int linesNum = (linesC.size()<8 ? linesC.size() : 8);
Vec orientation [8];
for (unsigned int i=0; i<linesNum; i++)
orientation[i]=(linesC[i].front().toVec()-linesC[i].back().toVec()).normalize();
unsigned int b1=99, b2=99, b3=99, b4=99;
unsigned bestSolution = 1000;
Vec intersection;
for (unsigned int i1=0; i1<linesNum; i1++) {
for (unsigned int i2=i1+1; i2<linesNum; i2++) {
double orientationMatch1 = abs(orientation[i1]*orientation[i2]);
if (orientationMatch1<0.5)
continue; // Kanten sind mehr als 60Grad auseinander
double minimalDistance1 = minDist (linesC[i1], linesC[i2], orientation[i1]*orientation[i2]);
if (minimalDistance1>20)
continue; // Kanten sind zu weit voneinander entfernt
std::deque<ImageCoordinate> pxl1 = linesC[i1];
pxl1.insert (pxl1.end(), linesC[i2].begin(), linesC[i2].end());
LineSegment ls1 = estimateLineSegment (pxl1.begin(), pxl1.end());
Line l1 (ls1.getStart(), ls1.getEnd());
Vec dir1 = (ls1.getStart()-ls1.getEnd()).normalize();
for (unsigned int i3=0; i3<linesNum; i3++) if (i3!=i1 && i3!=i2) {
for (unsigned int i4=i3+1; i4<linesNum; i4++) if (i4!=i1 && i4!=i2) {
try{
double orientationMatch2 = abs(orientation[i3]*orientation[i4]);
if (orientationMatch1+orientationMatch2<1.5)
continue; // Kanten sind zu weit auseinander
double minimalDistance2 = minDist (linesC[i3], linesC[i4], orientation[i1]*orientation[i2]);
if (minimalDistance1+minimalDistance2>30)
continue; // Kanten sind zu weit voneinander entfernt
std::deque<ImageCoordinate> pxl2 = linesC[i3];
pxl2.insert (pxl2.end(), linesC[i4].begin(), linesC[i4].end());
LineSegment ls2 = estimateLineSegment (pxl2.begin(), pxl2.end());
Line l2 (ls2.getStart(), ls2.getEnd());
Vec norm2 = (ls2.getStart()-ls2.getEnd()).normalize().rotate_quarter();
double mm = dir1*norm2;
if (mm<0.5)
continue; // Kanten bilden kein Kreuz
Vec pi = intersect (l1, l2);
double md=1e300;
for (unsigned int i=0; i<regionAfter->size(); i++) {
double d=((*regionAfter)[i].toVec()-pi).length();
if (d<md)
md=d;
}
if (md>5)
continue; // Punkt ausserhalb des roten Kreises
if (i1+i2+i3+i4<bestSolution) {
bestSolution=i1+i2+i3+i4;
intersection=pi;
b1=i1;
b2=i2;
b3=i3;
b4=i4;
}
}catch(invalid_argument&){;}
}
}
}
}
for (unsigned int i=0; i<linesC.size(); i++) {
LineSegment ls = estimateLineSegment (linesC[i].begin(), linesC[i].end());
bool sel = (i==b1 || i==b2 || i==b3 || i==b4);
drawLine (*image, ls.getStart(), ls.getEnd(), (sel ? red : green), yellow);
}
if (bestSolution<1000) {
cerr << "Schnittpunkt: " << intersection << endl;
paint.setColor (blue);
paint.markRect (static_cast<int>(intersection.x+0.5), static_cast<int>(intersection.y+0.5), 5);
CalibrationMarker mk;
mk.truePosition=trueMarkerPosition;
mk.imagePosition=intersection;
mk.imageNumber=imageNumber;
markers.push_back (mk);
} else {
cerr << "Problem: die laengsten Linienstuecke bilden kein Kreuz\n";
}
} else {
cerr << "Problem: nur " << linesC.size() << " Linienstuecke gefunden\n";
}
break;
}
default: // nothing, just display image
break;
}
}
LineSegment<T, N> getReverse(const LineSegment<T, N>& line)
{
return LineSegment<T, N>(line.getEnd(), line.getStart());
}