/** Open a new plotfile using the options (and especially the format)
* specified in the options and prepare the page for plotting.
* Return the plotter object if OK, NULL if the file is not created
* (or has a problem)
*/
PLOTTER* StartPlotBoard( BOARD *aBoard, PCB_PLOT_PARAMS *aPlotOpts,
const wxString& aFullFileName,
const wxString& aSheetDesc )
{
// Create the plotter driver and set the few plotter specific
// options
PLOTTER* plotter = NULL;
switch( aPlotOpts->GetFormat() )
{
case PLOT_FORMAT_DXF:
plotter = new DXF_PLOTTER();
break;
case PLOT_FORMAT_POST:
PS_PLOTTER* PS_plotter;
PS_plotter = new PS_PLOTTER();
PS_plotter->SetScaleAdjust( aPlotOpts->GetFineScaleAdjustX(),
aPlotOpts->GetFineScaleAdjustY() );
plotter = PS_plotter;
break;
case PLOT_FORMAT_PDF:
plotter = new PDF_PLOTTER();
break;
case PLOT_FORMAT_HPGL:
HPGL_PLOTTER* HPGL_plotter;
HPGL_plotter = new HPGL_PLOTTER();
/* HPGL options are a little more convoluted to compute, so
they're split in an other function */
ConfigureHPGLPenSizes( HPGL_plotter, aPlotOpts );
plotter = HPGL_plotter;
break;
case PLOT_FORMAT_GERBER:
plotter = new GERBER_PLOTTER();
break;
case PLOT_FORMAT_SVG:
plotter = new SVG_PLOTTER();
break;
default:
wxASSERT( false );
return NULL;
}
// Compute the viewport and set the other options
// page layout is not mirrored, so temporary change mirror option
// just to plot the page layout
PCB_PLOT_PARAMS plotOpts = *aPlotOpts;
if( plotOpts.GetPlotFrameRef() && plotOpts.GetMirror() )
plotOpts.SetMirror( false );
initializePlotter( plotter, aBoard, &plotOpts );
if( plotter->OpenFile( aFullFileName ) )
{
plotter->StartPlot();
// Plot the frame reference if requested
if( aPlotOpts->GetPlotFrameRef() )
{
PlotWorkSheet( plotter, aBoard->GetTitleBlock(),
aBoard->GetPageSettings(),
1, 1, // Only one page
aSheetDesc, aBoard->GetFileName() );
if( aPlotOpts->GetMirror() )
initializePlotter( plotter, aBoard, aPlotOpts );
}
/* When plotting a negative board: draw a black rectangle
* (background for plot board in white) and switch the current
* color to WHITE; note the color inversion is actually done
* in the driver (if supported) */
if( aPlotOpts->GetNegative() )
{
EDA_RECT bbox = aBoard->ComputeBoundingBox();
FillNegativeKnockout( plotter, bbox );
}
return plotter;
}
delete plotter;
return NULL;
}
bool GENDRILL_WRITER_BASE::genDrillMapFile( const wxString& aFullFileName,
PlotFormat aFormat )
{
// Remark:
// Hole list must be created before calling this function, by buildHolesList(),
// for the right holes set (PTH, NPTH, buried/blind vias ...)
double scale = 1.0;
wxPoint offset;
PLOTTER* plotter = NULL;
PAGE_INFO dummy( PAGE_INFO::A4, false );
PCB_PLOT_PARAMS plot_opts; // starts plotting with default options
LOCALE_IO toggle; // use standard C notation for float numbers
const PAGE_INFO& page_info = m_pageInfo ? *m_pageInfo : dummy;
// Calculate dimensions and center of PCB
EDA_RECT bbbox = m_pcb->GetBoardEdgesBoundingBox();
// Calculate the scale for the format type, scale 1 in HPGL, drawing on
// an A4 sheet in PS, + text description of symbols
switch( aFormat )
{
case PLOT_FORMAT_GERBER:
offset = GetOffset();
plotter = new GERBER_PLOTTER();
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
plotter->SetGerberCoordinatesFormat( 5 ); // format x.5 unit = mm
break;
case PLOT_FORMAT_HPGL: // Scale for HPGL format.
{
HPGL_PLOTTER* hpgl_plotter = new HPGL_PLOTTER;
plotter = hpgl_plotter;
hpgl_plotter->SetPenNumber( plot_opts.GetHPGLPenNum() );
hpgl_plotter->SetPenSpeed( plot_opts.GetHPGLPenSpeed() );
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
default:
wxASSERT( false );
// fall through
case PLOT_FORMAT_PDF:
case PLOT_FORMAT_POST:
{
PAGE_INFO pageA4( wxT( "A4" ) );
wxSize pageSizeIU = pageA4.GetSizeIU();
// Reserve a margin around the page.
int margin = KiROUND( 20 * IU_PER_MM );
// Calculate a scaling factor to print the board on the sheet
double Xscale = double( pageSizeIU.x - ( 2 * margin ) ) / bbbox.GetWidth();
// We should print the list of drill sizes, so reserve room for it
// 60% height for board 40% height for list
int ypagesize_for_board = KiROUND( pageSizeIU.y * 0.6 );
double Yscale = double( ypagesize_for_board - margin ) / bbbox.GetHeight();
scale = std::min( Xscale, Yscale );
// Experience shows the scale should not to large, because texts
// create problem (can be to big or too small).
// So the scale is clipped at 3.0;
scale = std::min( scale, 3.0 );
offset.x = KiROUND( double( bbbox.Centre().x ) -
( pageSizeIU.x / 2.0 ) / scale );
offset.y = KiROUND( double( bbbox.Centre().y ) -
( ypagesize_for_board / 2.0 ) / scale );
if( aFormat == PLOT_FORMAT_PDF )
plotter = new PDF_PLOTTER;
else
plotter = new PS_PLOTTER;
plotter->SetPageSettings( pageA4 );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_DXF:
{
DXF_PLOTTER* dxf_plotter = new DXF_PLOTTER;
plotter = dxf_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
case PLOT_FORMAT_SVG:
{
SVG_PLOTTER* svg_plotter = new SVG_PLOTTER;
plotter = svg_plotter;
plotter->SetPageSettings( page_info );
plotter->SetViewport( offset, IU_PER_MILS/10, scale, false );
}
break;
}
plotter->SetCreator( wxT( "PCBNEW" ) );
plotter->SetDefaultLineWidth( 5 * IU_PER_MILS );
plotter->SetColorMode( false );
if( ! plotter->OpenFile( aFullFileName ) )
{
delete plotter;
return false;
}
plotter->StartPlot();
// Draw items on edge layer (not all, only items useful for drill map
BRDITEMS_PLOTTER itemplotter( plotter, m_pcb, plot_opts );
itemplotter.SetLayerSet( Edge_Cuts );
for( auto PtStruct : m_pcb->Drawings() )
{
switch( PtStruct->Type() )
{
case PCB_LINE_T:
itemplotter.PlotDrawSegment( (DRAWSEGMENT*) PtStruct );
break;
case PCB_TEXT_T:
itemplotter.PlotTextePcb( (TEXTE_PCB*) PtStruct );
break;
case PCB_DIMENSION_T:
case PCB_TARGET_T:
case PCB_MARKER_T: // do not draw
default:
break;
}
}
int x, y;
int plotX, plotY, TextWidth;
int intervalle = 0;
char line[1024];
wxString msg;
int textmarginaftersymbol = KiROUND( 2 * IU_PER_MM );
// Set Drill Symbols width
plotter->SetDefaultLineWidth( 0.2 * IU_PER_MM / scale );
plotter->SetCurrentLineWidth( -1 );
// Plot board outlines and drill map
plotDrillMarks( plotter );
// Print a list of symbols used.
int charSize = 3 * IU_PER_MM; // text size in IUs
double charScale = 1.0 / scale; // real scale will be 1/scale,
// because the global plot scale is scale
TextWidth = KiROUND( (charSize * charScale) / 10.0 ); // Set text width (thickness)
intervalle = KiROUND( charSize * charScale ) + TextWidth;
// Trace information.
plotX = KiROUND( bbbox.GetX() + textmarginaftersymbol * charScale );
plotY = bbbox.GetBottom() + intervalle;
// Plot title "Info"
wxString Text = wxT( "Drill Map:" );
plotter->Text( wxPoint( plotX, plotY ), COLOR4D::UNSPECIFIED, Text, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
for( unsigned ii = 0; ii < m_toolListBuffer.size(); ii++ )
{
DRILL_TOOL& tool = m_toolListBuffer[ii];
if( tool.m_TotalCount == 0 )
continue;
plotY += intervalle;
int plot_diam = KiROUND( tool.m_Diameter );
x = KiROUND( plotX - textmarginaftersymbol * charScale - plot_diam / 2.0 );
y = KiROUND( plotY + charSize * charScale );
plotter->Marker( wxPoint( x, y ), plot_diam, ii );
// List the diameter of each drill in mm and inches.
sprintf( line, "%2.2fmm / %2.3f\" ",
diameter_in_mm( tool.m_Diameter ),
diameter_in_inches( tool.m_Diameter ) );
msg = FROM_UTF8( line );
// Now list how many holes and ovals are associated with each drill.
if( ( tool.m_TotalCount == 1 )
&& ( tool.m_OvalCount == 0 ) )
sprintf( line, "(1 hole)" );
else if( tool.m_TotalCount == 1 ) // && ( toolm_OvalCount == 1 )
sprintf( line, "(1 slot)" );
else if( tool.m_OvalCount == 0 )
sprintf( line, "(%d holes)", tool.m_TotalCount );
else if( tool.m_OvalCount == 1 )
sprintf( line, "(%d holes + 1 slot)", tool.m_TotalCount - 1 );
else // if ( toolm_OvalCount > 1 )
sprintf( line, "(%d holes + %d slots)",
tool.m_TotalCount - tool.m_OvalCount,
tool.m_OvalCount );
msg += FROM_UTF8( line );
if( tool.m_Hole_NotPlated )
msg += wxT( " (not plated)" );
plotter->Text( wxPoint( plotX, y ), COLOR4D::UNSPECIFIED, msg, 0,
wxSize( KiROUND( charSize * charScale ),
KiROUND( charSize * charScale ) ),
GR_TEXT_HJUSTIFY_LEFT, GR_TEXT_VJUSTIFY_CENTER,
TextWidth, false, false );
intervalle = KiROUND( ( ( charSize * charScale ) + TextWidth ) * 1.2 );
if( intervalle < ( plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth ) )
intervalle = plot_diam + ( 1 * IU_PER_MM / scale ) + TextWidth;
}
plotter->EndPlot();
delete plotter;
return true;
}
