Exemplo n.º 1
0
void FreeRegionGrabber::grabRect()
{
    QPolygon pol = selection;
    if ( !pol.isEmpty() )
    {
	grabbing = true;

        int xOffset = pixmap.rect().x() - pol.boundingRect().x();
        int yOffset = pixmap.rect().y() - pol.boundingRect().y();
        QPolygon translatedPol = pol.translated(xOffset, yOffset);

        QPixmap pixmap2(pol.boundingRect().size());
        pixmap2.fill(Qt::transparent);

        QPainter pt;
        pt.begin(&pixmap2);
        if (pt.paintEngine()->hasFeature(QPaintEngine::PorterDuff)) {
            pt.setRenderHints(QPainter::Antialiasing | QPainter::HighQualityAntialiasing | QPainter::SmoothPixmapTransform, true);
            pt.setBrush(Qt::black);
            pt.setPen(QPen(QBrush(Qt::black), 0.5));
            pt.drawPolygon(translatedPol);
            pt.setCompositionMode(QPainter::CompositionMode_SourceIn);
        } else {
            pt.setClipRegion(QRegion(translatedPol));
            pt.setCompositionMode(QPainter::CompositionMode_Source);
        }

        pt.drawPixmap(pixmap2.rect(), pixmap, pol.boundingRect());
        pt.end();

        emit freeRegionUpdated(pol);
        emit freeRegionGrabbed(pixmap2);
    }
}
Exemplo n.º 2
0
    void paintEvent( QPaintEvent* pe ) override
    {
      Q_UNUSED( pe );

      QPainter p;
      p.begin( this );
      p.setPen( Qt::red );
      QPolygonF t = mPoly.translated( -mPoly.boundingRect().left(), -mPoly.boundingRect().top() );
      p.drawConvexPolygon( t );
      p.end();
    }
Exemplo n.º 3
0
QSize KDChart::TextLayoutItem::calcSizeHint(
        QFont fnt, QPoint& topLeftPt, QPoint& topRightPt, QPoint& bottomRightPt, QPoint& bottomLeftPt ) const
{
    const QSize siz( unrotatedSizeHint( fnt ));
    //qDebug() << "-------- siz: "<<siz;
    if( ! mAttributes.rotation() ){
        topLeftPt     = QPoint(0,0);
        topRightPt    = QPoint(siz.width(),0);
        bottomRightPt = QPoint(siz.width(),siz.height());
        bottomLeftPt  = QPoint(0,siz.height());
        return siz;
    }

    const QRect rect(QPoint(0, 0), siz + QSize(4,4));
    const qreal angle = PI * mAttributes.rotation() / 180.0;
    const qreal cosAngle = cos( angle );
    const qreal sinAngle = sin( angle );
    QMatrix rotationMatrix(cosAngle, sinAngle, -sinAngle, cosAngle, 0, 0);
    QPolygon rotPts;
    rotPts << rotationMatrix.map(rect.topLeft())
           << rotationMatrix.map(rect.topRight())
           << rotationMatrix.map(rect.bottomRight())
           << rotationMatrix.map(rect.bottomLeft());
    QSize rotSiz( rotPts.boundingRect().size() );
    //qDebug() << "-------- KDChart::TextLayoutItem::calcSizeHint() returns:"<<rotSiz<<rotPts;
    topLeftPt     = rotPts[0];
    topRightPt    = rotPts[1];
    bottomRightPt = rotPts[2];
    bottomLeftPt  = rotPts[3];
    return rotSiz;
}
Exemplo n.º 4
0
QRectF rotatedRect( const QRectF& oldRect, qreal angleInt, const QPointF& center )
{
    const QRect rect( oldRect.translated( center ).toRect() );
    const qreal angle = PI * angleInt / 180.0;
    const qreal cosAngle = cos( angle );
    const qreal sinAngle = sin( angle );
    QMatrix rotationMatrix(cosAngle, sinAngle, -sinAngle, cosAngle, 0, 0);
    QPolygon rotPts;
    rotPts <<  rotationMatrix.map(rect.topLeft()) //QPoint(0,0)
            << rotationMatrix.map(rect.topRight())
            << rotationMatrix.map(rect.bottomRight())
            << rotationMatrix.map(rect.bottomLeft());
            //<< rotatedPoint(rect.topRight(), angleInt, center).toPoint()
            //<< rotatedPoint(rect.bottomRight(), angleInt, center).toPoint()
            //<< rotatedPoint(rect.bottomLeft(), angleInt, center).toPoint();
    return rotPts.boundingRect();
/*
    const QPointF topLeft( rotatedPoint( oldRect.topLeft(), angle, center ) );
    const QPointF topRight( rotatedPoint( oldRect.topRight(), angle, center ) );
    const QPointF bottomLeft( rotatedPoint( oldRect.bottomLeft(), angle, center ) );
    const QPointF bottomRight( rotatedPoint( oldRect.bottomRight(), angle, center ) );

    const qreal x = qMin( qMin( topLeft.x(), topRight.x() ), qMin( bottomLeft.x(), topLeft.x() ) );
    const qreal y = qMin( qMin( topLeft.y(), topRight.y() ), qMin( bottomLeft.y(), topLeft.y() ) );
    const qreal width = qMax( qMax( topLeft.x(), topRight.x() ), qMax( bottomLeft.x(), topLeft.x() ) ) - x;
    const qreal height = qMax( qMax( topLeft.y(), topRight.y() ), qMax( bottomLeft.y(), topLeft.y() ) ) - y;

    return QRectF( x, y, width, height );
*/
}
Exemplo n.º 5
0
void QgsPanningWidget::setPolygon( const QPolygon& p )
{
  if ( p == mPoly ) return;
  mPoly = p;
  setGeometry( p.boundingRect() );
  update();
}
Exemplo n.º 6
0
QPolygon sdraw::normalizePolygon(const QPolygon &polygon, int offset)
{
   QPolygon ret = polygon;
   QRect boundingRect = ret.boundingRect();
   QPoint transPt(-boundingRect.topLeft().x() + offset,
      -boundingRect.topLeft().y() + offset);
   ret.translate(transPt);
   return ret;
}
QVariant PdfFrameHandle::itemChange (GraphicsItemChange change,
                                     const QVariant &value)
{
  QVariant valueFiltered = value;

  if (change == ItemPositionChange && scene()) {

    QPointF sizeAsPointF (boundingRect().size().width(),
                          boundingRect().size().height());

    // New position is in the value argument
    QPointF newPos = valueFiltered.toPointF();
    QPointF oldPos = pos ();

    // This sequence is from http://www.qtcentre.org/threads/47248-How-to-efficiently-get-position-of-a-QGraphicsItem-in-view-coordinates
    QRectF newRectItem (newPos,
                        QSize (boundingRect().size().width(),
                               boundingRect().size().height()));
    QPolygonF newRectScene = mapToScene (newRectItem);
    QPolygon newRectView = m_view.mapFromScene (newRectScene.boundingRect());

    // Skip moving of this handle if it will go outside of the window
    QRectF rectWindow = m_scene.sceneRect();
    if (!rectWindow.contains (newRectView.boundingRect())) {

      // Keep the item inside the scene rectangle
      newPos.setX (qMin (rectWindow.right(), qMax (newPos.x(), rectWindow.left())));
      newPos.setY (qMin (rectWindow.bottom(), qMax (newPos.y(), rectWindow.top())));

      valueFiltered = (newPos);

    }

    // Skip moving of other handles, in response to the move of this handle, if event handling is (temporarily) off,
    // to prevent an infinite loop
    if (!m_disableEventsWhileMovingAutomatically) {

      bool left   = ((m_orientationFlags & PdfCropping::PDF_CROPPING_LEFT  ) != 0);
      bool right  = ((m_orientationFlags & PdfCropping::PDF_CROPPING_RIGHT ) != 0);
      bool top    = ((m_orientationFlags & PdfCropping::PDF_CROPPING_TOP   ) != 0);
      bool bottom = ((m_orientationFlags & PdfCropping::PDF_CROPPING_BOTTOM) != 0);

      if (left && top) {
        m_pdfCropping.moveTL (newPos, oldPos);
      } else if (right && top) {
        m_pdfCropping.moveTR (newPos, oldPos);
      } else if (right && bottom) {
        m_pdfCropping.moveBR (newPos, oldPos);
      } else if (left && bottom) {
        m_pdfCropping.moveBL (newPos, oldPos);
      }
    }
  }

  return QGraphicsItem::itemChange(change, valueFiltered);
}
Exemplo n.º 8
0
/** Save a QPolygon to a stream in a shorter form. */
void ShortSave(QDataStream & s, const QPolygon& a)
{
  //first, check if we _can_ do this the short way...
  QRect bBox = a.boundingRect();

  if (bBox.width() <= 254 && bBox.height() <= 254)
    {
      //qDebug("using  8 bits format");
      //ok, we can do our own saving in 8 bits format to save space
      s << (qint8) 1; //set flag to say we used this format :-)
      QPoint topLeft = bBox.topLeft(); //get the coordinates of the top left of the box
      s << topLeft;
      QPolygon ca(a);
      ca.translate(-topLeft.x(), -topLeft.y()); // translate the box so it's top left on (0,0)
      //now, all points in the array fit into 16 bits!
      s << (quint32) ca.count();

      for (int i = 0; i < ca.count(); i++)
        {
          s << (quint8) ca.at(i).x();
          s << (quint8) ca.at(i).y();
        }
    }
  else if (bBox.width() < 65500 && bBox.height() < 65500)
    {
      //qDebug("using 16 bits format");
      //ok, we can do our own saving in 16 bits format to save space
      s << (qint8) 2; //set flag to say we used this format :-)
      QPoint topLeft = bBox.topLeft(); //get the coordinates of the top left of the box
      s << topLeft;
      QPolygon ca(a);
      ca.translate(-topLeft.x(), -topLeft.y()); // translate the box so it's top left on (0,0)
      //now, all points in the array fit into 32 bits!
      s << (quint32) ca.count();

      for (int i = 0; i < ca.count(); i++)
        {
          s << (quint16) ca.at(i).x();
          s << (quint16) ca.at(i).y();
        }
    }
  else
    {
      //qDebug("using long 32 bits format.");
      //too big. We need to use the normal 2x32 bits format :-(
      s << (qint8) 4; //we need to set a flag that we use the normal format
      s << a;
    }
}
Exemplo n.º 9
0
//! Sutherland-Hodgman polygon clipping
QPolygon GraphPolygonClipper::clipPolygon(const QPolygon &pa) const
{
    if ( contains( pa.boundingRect() ) )
        return pa;

    QPolygon cpa(pa.size());

    clipEdge((Edge)0, pa, cpa);

    for ( uint edge = 1; edge < NEdges; edge++ ) 
    {
        const QPolygon rpa = cpa;
        clipEdge((Edge)edge, rpa, cpa);
    }

    return cpa;
}
Exemplo n.º 10
0
LineElement::LineElement( const QString& name,
                          const BaseMapElement::objectType t,
                          const QPolygon& pP,
                          const bool isV,
                          const unsigned short secID,
                          const QString& country )
  : BaseMapElement(name, t, secID, country),
    projPolygon(pP),
    bBox(pP.boundingRect()),
    valley(isV),
    closed(false)
{
  if( typeID == BaseMapElement::Lake ||
      typeID == BaseMapElement::City ||
      typeID == BaseMapElement::Forest )
    {
      closed = true;
    }
}
Exemplo n.º 11
0
void QGVPage::drawBackground(QPainter *p, const QRectF &)
{
//Note: Background is not part of scene()
    if(!drawBkg)
        return;

    if (!m_vpPage->getDrawPage()) {
        //Base::Console().Log("TROUBLE - QGVP::drawBackground - no Page Object!\n");
        return;
    }

    p->save();
    p->resetTransform();


    p->setBrush(*bkgBrush);
    p->drawRect(viewport()->rect().adjusted(-2,-2,2,2));   //just bigger than viewport to prevent artifacts

    if(!m_vpPage) {
        return;
    }

    // Default to A3 landscape, though this is currently relevant
    // only for opening corrupt docs, etc.
    float pageWidth = 420,
          pageHeight = 297;

    if ( m_vpPage->getDrawPage()->hasValidTemplate() ) {
        pageWidth = Rez::guiX(m_vpPage->getDrawPage()->getPageWidth());
        pageHeight = Rez::guiX(m_vpPage->getDrawPage()->getPageHeight());
    }

    // Draw the white page
    QRectF paperRect(0, -pageHeight, pageWidth, pageHeight);
    QPolygon poly = mapFromScene(paperRect);

    QBrush pageBrush(Qt::white);
    p->setBrush(pageBrush);

    p->drawRect(poly.boundingRect());

    p->restore();
}
Exemplo n.º 12
0
void
QStyleRangeSlider::paintFilling(QPainter& p, const QRect& bbox,
                                const QPair<int, int>& range,
                                const QPair<int, int>& cutoffRange) const
{

  QRect paintBox;

  int x = getPosMin(bbox, range.first, cutoffRange);
  int width = getPosMax(bbox, range.second, cutoffRange) - x;

  paintBox.setX(x);
  paintBox.setY(getGrooveY(bbox));
  paintBox.setWidth(width);
  paintBox.setHeight(getGrooveHeight(bbox));

  QPolygon paintArea = QPolygon(paintBox, true);

  QRectF pbbox = paintArea.boundingRect();

  QPointF p1 = pbbox.topLeft();
  QPointF p2 = pbbox.bottomRight();
  p2.setX(p1.x());

  QLinearGradient grad(p1, p2);
  grad.setColorAt(0, Qt::black);
  grad.setColorAt(0.15, Qt::red);
  grad.setColorAt(0.85, Qt::red);
  grad.setColorAt(1.0, Qt::white);

  p.save();
  //p.setRenderHint(QPainter::Antialiasing, true);
  p.setRenderHint(QPainter::HighQualityAntialiasing, true);
  p.setPen(Qt::NoPen);
  //p.drawPoints(paintArea);
  p.setBrush(QBrush(grad));
  p.drawPolygon(paintArea);
  p.restore();

}
Exemplo n.º 13
0
void SaxsviewMask::Private::setValue(SaxsviewMask *mask, const QPolygonF& p, double value) {
  if (SaxsviewFrameData *d = (SaxsviewFrameData*)(mask->data())) {
    // QPolygonF::toPolygon() internally uses toPoint() rounding, see above.
    QPolygon polygon;
    foreach (QPointF pt, p)
      polygon << QPoint((int)pt.x(), (int)pt.y());

    const QRect r = polygon.boundingRect();

    if (polygon.size() > 2) {
      for (int x = r.x(); x <= r.x() + r.width(); ++x)
        for (int y = r.y(); y <= r.y() + r.height(); ++y)
          if (polygon.containsPoint(QPoint(x, y), Qt::OddEvenFill))
            d->setValue(x, y, value);

    } else
      bresenham(polygon[0].x(), polygon[0].y(),
                polygon[1].x(), polygon[1].y(),
                d, value);

    modified = true;
    mask->plot()->replot();
  }
}
Exemplo n.º 14
0
/*
 * This implementation is from QWindowsStyle (Qt 7.2)
 *
 * It is licensed under the GPL 3:
 * Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
 * Contact: Nokia Corporation ([email protected])
 */
void StyleHelper::drawArrow( QStyle::PrimitiveElement element, QPainter* p, const QStyleOption* opt )
{
    if ( opt->rect.width() <= 1 || opt->rect.height() <= 1 )
        return;

    QRect r = opt->rect;
    int size = qMin( r.height(), r.width() );
    QPixmap pixmap;
    QString pixmapName;

    pixmapName.sprintf( "arrow-%s-%d-%d-%d-%lld", "$qt_ia", uint(opt->state), element, size, opt->palette.cacheKey() );
    if ( !QPixmapCache::find( pixmapName, pixmap) )
    {
        int border = size / 5;
        int sqsize = 2 * ( size / 2 );

        QImage image( sqsize, sqsize, QImage::Format_ARGB32 );
        image.fill( 0 );
        QPainter imagePainter( &image );
        imagePainter.setRenderHint( QPainter::Antialiasing, true );
        QPolygon a;

        switch ( element )
        {
            case QStyle::PE_IndicatorArrowUp:
                a.setPoints( 3, border, sqsize / 2, sqsize / 2, border, sqsize - border, sqsize / 2 );
                break;

            case QStyle::PE_IndicatorArrowDown:
                a.setPoints( 3, border, sqsize / 2, sqsize / 2, sqsize - border,  sqsize - border, sqsize / 2 );
                break;

            case QStyle::PE_IndicatorArrowRight:
                a.setPoints( 3, sqsize - border, sqsize / 2, sqsize / 2, border, sqsize / 2, sqsize - border );
                break;

            case QStyle::PE_IndicatorArrowLeft:
                a.setPoints( 3, border, sqsize / 2, sqsize / 2, border, sqsize / 2, sqsize - border );
                break;

            default:
                break;
        }

        int bsx = 0;
        int bsy = 0;

        if ( opt->state & QStyle::State_Sunken )
        {
            bsx = qApp->style()->pixelMetric( QStyle::PM_ButtonShiftHorizontal );
            bsy = qApp->style()->pixelMetric( QStyle::PM_ButtonShiftVertical );
        }

        QRect bounds = a.boundingRect();
        int sx = sqsize / 2 - bounds.center().x() - 1;
        int sy = sqsize / 2 - bounds.center().y() - 1;
        imagePainter.translate( sx + bsx, sy + bsy );
        imagePainter.setPen( opt->palette.buttonText().color() );
        imagePainter.setBrush( opt->palette.buttonText() );

        if ( !( opt->state & QStyle::State_Enabled ) )
        {
            QColor foreGround( 150, 150, 150, 150 );
            imagePainter.setBrush( opt->palette.mid().color() );
            imagePainter.setPen( opt->palette.mid().color() );
        }
        else
        {
            QColor shadow( 0, 0, 0, 100 );
            imagePainter.translate( 0, 1 );
            imagePainter.setPen( shadow );
            imagePainter.setBrush( shadow );
            QColor foreGround( 255, 255, 255, 210 );
            imagePainter.drawPolygon( a );
            imagePainter.translate( 0, -1 );
            imagePainter.setPen( foreGround );
            imagePainter.setBrush( foreGround );
        }

        imagePainter.drawPolygon( a );
        imagePainter.end();

        pixmap = QPixmap::fromImage( image );
        QPixmapCache::insert( pixmapName, pixmap );
    }

    int xOffset = r.x() + ( r.width() - size ) / 2;
    int yOffset = r.y() + ( r.height() - size ) / 2;
    p->drawPixmap( xOffset, yOffset, pixmap );
}
Exemplo n.º 15
0
bool DataManager::readDetectionAreaFile(bool clipToCamera) {
    QFile areaFile(m_config->detectionAreaFile());
    QDomDocument doc;
    QDomElement root;
    int x = 0;
    int y = 0;
    int cameraId = m_config->cameraIndex();
    int cameraWidth = m_config->cameraWidth();
    int cameraHeight = m_config->cameraHeight();
    QPolygon cameraRectangle;
    bool polygonsClipped = false;
    bool polygonWasClosed = false;

    if(!areaFile.open(QIODevice::ReadOnly | QIODevice::Text)) {
        QString errorMsg = tr("Failed to open the detection area file %1. Please create it in Settings dialog or manually.").arg(areaFile.fileName());
        emit messageBroadcasted(errorMsg);
        return false;
    }

    if(!doc.setContent(&areaFile)) {
        QString errorMsg = tr("Error reading the detection area file %1").arg(areaFile.fileName());
        areaFile.close();
        emit messageBroadcasted(errorMsg);
        return false;
    }

    areaFile.close();
    root = doc.documentElement();
    if (root.nodeName() != "detectionarealist") {
        QString errorMsg = tr("Expected <detectionarealist> tag in detection area file but not found");
        emit messageBroadcasted(errorMsg);
        return false;
    }
    QDomNodeList areaList = root.childNodes();

    if (areaList.count() > 1) {
        QString errorMsg = tr("More than one detection areas defined, combining all together");
        emit messageBroadcasted(errorMsg);
    }

    for (int i = 0; i < areaList.count(); i++) {
        QDomNode area = areaList.at(i);
        QDomNodeList areaNodes = area.childNodes();

        if (area.nodeName() != "detectionarea") {
            QString errorMsg = tr("Expected <detectionarea> tag in detection area file but not found.");
            emit messageBroadcasted(errorMsg);
            return false;
        }

        QDomNodeList cameraList = area.toElement().elementsByTagName("camera");

        if (cameraList.count() != 1) {
            QString errorMsg = tr("Expected single <camera> tag in detection area. Assuming camera index 0.");
            emit messageBroadcasted(errorMsg);
        }
        for (int c = 0; c < cameraList.count(); c++) {
            QDomElement cameraElement = cameraList.at(c).toElement();
            cameraId = cameraElement.attribute("id").toInt();
            cameraWidth = cameraElement.attribute("width").toInt();
            cameraHeight = cameraElement.attribute("height").toInt();
            if (cameraId == m_config->cameraIndex()) {
                break;
            }
        }

        cameraRectangle << QPoint(0, 0) << QPoint(0, cameraHeight - 1)
                        << QPoint(cameraWidth - 1, cameraHeight - 1) << QPoint(cameraWidth - 1, 0);

        while (!m_detectionAreaPolygons.isEmpty()) {
            QPolygon* polygon = m_detectionAreaPolygons.takeLast();
            delete polygon;
        }

        for (int a = 0; a < areaNodes.count(); a++) {
            QDomNode areaSubNode = areaNodes.at(a);

            if (areaSubNode.nodeName() == "polygon") {
                QDomNodeList pointList = areaSubNode.childNodes();
                QPolygon* polygon = new QPolygon();

                for (int p = 0; p < pointList.count(); p++) {
                    QDomElement pointElement = pointList.at(p).toElement();
                    if (pointElement.nodeName() == "point") {
                        x = pointElement.attribute("x").toInt();
                        y = pointElement.attribute("y").toInt();
                        polygon->append(QPoint(x, y));
                    }
                }
                if (clipToCamera && polygon->size() &&
                    !cameraRectangle.boundingRect().contains(polygon->boundingRect()))
                {
                    if (polygon->first() == polygon->last()) {
                        polygonWasClosed = true;
                    }
                    *polygon = polygon->intersected(cameraRectangle);
                    polygonsClipped = true;
                    if (!polygonWasClosed) {
                        // intersected() treats polygon as implicitly closed
                        // so extra node is added: remove it
                        if (polygon->first() == polygon->last()) {
                            polygon->removeLast();
                        }
                    }
                }
                m_detectionAreaPolygons.append(polygon);
            }
        }
    }
    if (polygonsClipped) {
        QString warningMsg = tr("Detection area was clipped in order to fit the camera size.");
        emit messageBroadcasted(warningMsg);
    }
    return true;
}
Exemplo n.º 16
0
C2DPixmapSegment* CDraw2D::doFill(QPoint pt)
{
   if(!hasRegisteredBuffer())
   {
      return 0;
   }

   QImage img = m_buffer->toImage();
   blankAidBuffer();

   if (!checkGradientPoints())
   {
      return 0;
   }

   

   QPainterPath paintPath;
   QPolygon polygon = algorithm->polygonizeBorder(pt, *m_buffer).toPolygon();
   QRect boundingRect = polygon.boundingRect();

   QPointF normalizedCenter = CDrawSettings_2D::getInstance()->brushSettings().gradientCenterPoint();
   normalizedCenter.setX(normalizedCenter.x() - boundingRect.topLeft().x());
   normalizedCenter.setY(normalizedCenter.y() - boundingRect.topLeft().y());
   if (normalizedCenter.y() < 0)
   {
      normalizedCenter.setY(0);
   }
   if (normalizedCenter.y() > boundingRect.height())
   {
      normalizedCenter.setY(boundingRect.height());
   }
   if (normalizedCenter.x() < 0)
   {
      normalizedCenter.setX(0);
   }
   if (normalizedCenter.x() > boundingRect.width())
   {
      normalizedCenter.setX(boundingRect.width());
   }

   CBrushSettings brs = CDrawSettings_2D::getInstance()->brushSettings();
   brs.setGradientCenter(normalizedCenter);

   QPointF normalizedFocal = CDrawSettings_2D::getInstance()->brushSettings().gradientFocalPoint();
   normalizedFocal.setX(normalizedFocal.x() - boundingRect.topLeft().x());
   normalizedFocal.setY(normalizedFocal.y() - boundingRect.topLeft().y());
   if (normalizedFocal.y() < 0)
   {
      normalizedFocal.setY(0);
   }
   if (normalizedFocal.y() > boundingRect.height())
   {
      normalizedFocal.setY(boundingRect.height());
   }
   if (normalizedFocal.x() < 0)
   {
      normalizedFocal.setX(0);
   }
   if (normalizedFocal.x() > boundingRect.width())
   {
      normalizedFocal.setX(boundingRect.width());
   }

   brs.setGradientFocal(normalizedFocal);
   CDrawSettings_2D::getInstance()->setBrushSettings(brs);

   QPolygon normalizedPolygon = normalizePolygon(polygon, 0);
   if (normalizedPolygon.size() > 1)
   {
      paintPath.addPolygon(normalizedPolygon);
   }
   else
   {
      paintPath.addRect(0, 0, m_buffer->width(), m_buffer->height());
   }
   paintPath.closeSubpath();

   QSize segmentSize(boundingRect.size().width(), boundingRect.size().height());
   QPixmap segmentContent(segmentSize);
   segmentContent.fill(Qt::transparent);
   QPainter segmentPainter(&segmentContent);
   segmentPainter.setRenderHint(QPainter::Antialiasing, _settings.getAntialiasing());

   QBrush brush = CDrawSettings_2D::getInstance()->brushSettings().getBrush();
   QString summ = explainBrush(brush);
   //segmentPainter.fillRect(paintPath.boundingRect(), brush);
   segmentPainter.setPen(CDrawSettings_2D::getInstance()->penSettings().getPen());
   segmentPainter.setBrush(brush);

   segmentPainter.drawPath(paintPath);
   segmentPainter.end();

   //DebugImageDialog DBG(segmentContent);
   //DBG.exec();

   C2DPixmapSegment *segment = new C2DPixmapSegment(&segmentContent, &boundingRect, 1, 0);
   return segment;
}
Exemplo n.º 17
0
C2DPixmapSegment* CDraw2D::createSubpixmapFromPolygon(QPolygon &polygon, EPolygonConversion conv)
{
   if(polygon.size() < 2)
   {
      return 0;
   }

   

   int sizeOffset = qFloor(static_cast<qreal>(CDrawSettings_2D::getInstance()->penSettings().getWidth())/2.);

   // get the polygons relative to its bounding rectangle
   QPolygon normalizedPolygon = normalizePolygon(polygon, sizeOffset);
   QRect boundingRect = polygon.boundingRect();
   QRect normalizedBoundingRect = normalizedPolygon.boundingRect();
   QSize segmentSize(
      boundingRect.size().width() +  2 * sizeOffset + 1, 
      boundingRect.size().height() + 2 * sizeOffset + 1
      );

   // create segment
   QPixmap segmentContent(segmentSize);
   segmentContent.fill(Qt::transparent);
   QPainter segmentPainter(&segmentContent);
   segmentPainter.setPen(CDrawSettings_2D::getInstance()->penSettings().getPen());
   segmentPainter.setRenderHint(QPainter::Antialiasing,_settings.getAntialiasing());
   
   QPoint firstPt;
   QPoint secondPt;
   switch(conv)
   {
   case(NO_CONVERSION):
      segmentPainter.drawPolyline(normalizedPolygon);
      break;

   case(TO_LINES):
      firstPt = normalizedPolygon.at(0);
      for (int i = 1; i<normalizedPolygon.size(); i++)
      {
         secondPt = normalizedPolygon.at(i);
         if(firstPt == secondPt)
         {
            continue;
         }
         segmentPainter.drawLine(firstPt, secondPt);
         firstPt = secondPt;
      }
      break;

   case(TO_RECT):
      segmentPainter.drawRect(normalizedBoundingRect);
      break;

   case(TO_ROUNDED_RECT):
      segmentPainter.drawRoundedRect(
      normalizedBoundingRect,
      CDrawSettings_2D::getInstance()->getRoundedRectRadius_X(),
      CDrawSettings_2D::getInstance()->getRoundedRectRadius_Y()
      );
      break;

   case(TO_ELLIPSE):
      segmentPainter.drawEllipse(normalizedBoundingRect);
      break;

   case(TO_PIE):
      segmentPainter.drawPie(normalizedBoundingRect, alphaDegrees * 16, betaDegrees * 16);
      break;

   case(TO_ARC):
      segmentPainter.drawArc(normalizedBoundingRect, alphaDegrees * 16, betaDegrees * 16);
      break;

   case(TO_CHORD):
      segmentPainter.drawChord(normalizedBoundingRect, alphaDegrees * 16, betaDegrees * 16);
      break;

   default:
      segmentPainter.drawPolyline(normalizedPolygon);
      break;
   }

   segmentPainter.end();

   //DebugImageDialog DBG(segmentContent);
   //DBG.exec();

   C2DPixmapSegment *segment = new C2DPixmapSegment(&segmentContent, &boundingRect, 1, sizeOffset);
   return segment;
}
Exemplo n.º 18
0
/*!
 * parameters of polygons may vary depending on whether poly is selected or not or
 * whether it's label is main or not.
 */
void
ImageHolder::drawPolygons(
	QPainter *aPainter,
	QPen *aPen
) const
{
	if (0 == list_polygon_)
	{
		return;
		/* NOTREACHED */
	}

	Qt::PenStyle penStyle = Qt::SolidLine;
	/* default width is hardcoded */
	int width = 2;
	/* drawing all the polygons */
	for (int i = 0; i < list_polygon_->size(); i++) {
		penStyle = Qt::SolidLine;
		int labelID = list_polygon_->at(i)->label_ID_;

		/* setting color for the label of current bbox */
		if (labelID < list_label_color_->count())
			aPen->setColor(QColor(list_label_color_->at(labelID)));
		/* in case there is no color for such label */
		else
			aPen->setColor(QColor(Qt::white));

		/* checking whether labeled area is of main object or not */
		if (labelID == *main_label_)
			width = 3;
		else
			width = 2;

		/* changing the line style and width if current area is selected(focused) */
		if (PolyFigure == focused_selection_type_ &&
			focused_selection_ == i) {
			penStyle = Qt::DotLine;
			width = 3;
		}

		QPoint point;
		QPolygon poly = list_polygon_->at(i)->poly;
		for (int j = 0; j < poly.size(); j++) {
			point.setX(poly.at(j).x());
			point.setY(poly.at(j).y());
			/* scaling */
			point *= scale_;
			poly.remove(j);
			poly.insert(j, point);

			/* in case if it's focused */
			if (focused_selection_ == i &&
				focused_selection_type_ == PolyFigure) {
				QPen circPen;
				circPen.setWidth(2);
				circPen.setStyle(Qt::SolidLine);
				circPen.setColor(aPen->color());
				aPainter->setPen(circPen);
				/* filling the point if it is hovered */
				if ((j == hovered_point_.pointID &&
					i == hovered_point_.figureID &&
					PolyFigure == hovered_point_.figure) ||
					j == selected_point_) {
					QBrush brush;
					brush.setColor(aPen->color());
					brush.setStyle(Qt::SolidPattern);
					aPainter->setBrush(brush);
				}
				aPainter->drawEllipse(point, point_radius_, point_radius_);
				aPainter->setBrush(Qt::NoBrush);
			}
		}

		aPen->setWidth(width);
		aPen->setStyle(penStyle);
		aPainter->setPen(*aPen);

		aPainter->drawPolygon(poly);
		/* drawing label IDs of these polygons */
		QString labelIDText =
			QString("%1").arg(labelID);
		QRect rect = poly.boundingRect();
		int x = rect.center().x();
		int y = rect.center().y();

		aPainter->drawText(
			x,
			y,
			20,
			20,
			Qt::AlignHCenter,
			labelIDText
			);
	}

}
Exemplo n.º 19
0
void FreeRegionGrabber::paintEvent( QPaintEvent* e )
{
    Q_UNUSED( e );
    if ( grabbing ) // grabWindow() should just get the background
        return;

    QPainter painter( this );

    QPalette pal(QToolTip::palette());
    QFont font = QToolTip::font();

    QColor handleColor = pal.color( QPalette::Active, QPalette::Highlight );
    handleColor.setAlpha( 160 );
    QColor overlayColor( 0, 0, 0, 160 );
    QColor textColor = pal.color( QPalette::Active, QPalette::Text );
    QColor textBackgroundColor = pal.color( QPalette::Active, QPalette::Base );
    painter.drawPixmap(0, 0, pixmap);
    painter.setFont(font);

    QPolygon pol = selection;
    if ( !selection.boundingRect().isNull() )
    {
        // Draw outline around selection.
        // Important: the 1px-wide outline is *also* part of the captured free-region because
        // I found no way to draw the outline *around* the selection because I found no way
        // to create a QPolygon which is smaller than the selection by 1px (QPolygon::translated
        // is NOT equivalent to QRect::adjusted)
        QPen pen(handleColor, 1, Qt::SolidLine, Qt::SquareCap, Qt::BevelJoin);
        painter.setPen(pen);
        painter.drawPolygon( pol );

        // Draw the grey area around the selection
        QRegion grey( rect() );
        grey = grey - pol;
        painter.setClipRegion( grey );
        painter.setPen( Qt::NoPen );
        painter.setBrush( overlayColor );
        painter.drawRect( rect() );
        painter.setClipRect( rect() );
        drawPolygon( &painter, pol, handleColor);
    }

    if ( showHelp )
    {
        painter.setPen( textColor );
        painter.setBrush( textBackgroundColor );
        QString helpText = i18n( "Select a region using the mouse. To take the snapshot, press the Enter key or double click. Press Esc to quit." );
        helpTextRect = painter.boundingRect( rect().adjusted( 2, 2, -2, -2 ), Qt::TextWordWrap, helpText );
        helpTextRect.adjust( -2, -2, 4, 2 );
        drawPolygon( &painter, helpTextRect, textColor, textBackgroundColor );
        painter.drawText( helpTextRect.adjusted( 3, 3, -3, -3 ), helpText );
    }

    if ( selection.isEmpty() )
    {
        return;
    }

    // The grabbed region is everything which is covered by the drawn
    // rectangles (border included). This means that there is no 0px
    // selection, since a 0px wide rectangle will always be drawn as a line.
    QString txt = QString( "%1x%2" ).arg( selection.boundingRect().width() )
                  .arg( selection.boundingRect().height() );
    QRect textRect = painter.boundingRect( rect(), Qt::AlignLeft, txt );
    QRect boundingRect = textRect.adjusted( -4, 0, 0, 0);

    if ( textRect.width() < pol.boundingRect().width() - 2*handleSize &&
         textRect.height() < pol.boundingRect().height() - 2*handleSize &&
         ( pol.boundingRect().width() > 100 && pol.boundingRect().height() > 100 ) ) // center, unsuitable for small selections
    {
        boundingRect.moveCenter( pol.boundingRect().center() );
        textRect.moveCenter( pol.boundingRect().center() );
    }
    else if ( pol.boundingRect().y() - 3 > textRect.height() &&
              pol.boundingRect().x() + textRect.width() < rect().right() ) // on top, left aligned
    {
        boundingRect.moveBottomLeft( QPoint( pol.boundingRect().x(), pol.boundingRect().y() - 3 ) );
        textRect.moveBottomLeft( QPoint( pol.boundingRect().x() + 2, pol.boundingRect().y() - 3 ) );
    }
    else if ( pol.boundingRect().x() - 3 > textRect.width() ) // left, top aligned
    {
        boundingRect.moveTopRight( QPoint( pol.boundingRect().x() - 3, pol.boundingRect().y() ) );
        textRect.moveTopRight( QPoint( pol.boundingRect().x() - 5, pol.boundingRect().y() ) );
    }
    else if ( pol.boundingRect().bottom() + 3 + textRect.height() < rect().bottom() &&
              pol.boundingRect().right() > textRect.width() ) // at bottom, right aligned
    {
        boundingRect.moveTopRight( QPoint( pol.boundingRect().right(), pol.boundingRect().bottom() + 3 ) );
        textRect.moveTopRight( QPoint( pol.boundingRect().right() - 2, pol.boundingRect().bottom() + 3 ) );
    }
    else if ( pol.boundingRect().right() + textRect.width() + 3 < rect().width() ) // right, bottom aligned
    {
        boundingRect.moveBottomLeft( QPoint( pol.boundingRect().right() + 3, pol.boundingRect().bottom() ) );
        textRect.moveBottomLeft( QPoint( pol.boundingRect().right() + 5, pol.boundingRect().bottom() ) );
    }
    // if the above didn't catch it, you are running on a very tiny screen...
    drawPolygon( &painter, boundingRect, textColor, textBackgroundColor );

    painter.drawText( textRect, txt );

    if ( ( pol.boundingRect().height() > handleSize*2 && pol.boundingRect().width() > handleSize*2 )
         || !mouseDown )
    {
        painter.setBrush(QBrush(Qt::transparent));
        painter.setClipRegion( QRegion(pol));
        painter.drawPolygon( rect() );
    }
}
Exemplo n.º 20
0
void ManhattanStyle::drawPrimitive(PrimitiveElement element, const QStyleOption *option,
                                   QPainter *painter, const QWidget *widget) const {
    if (!panelWidget(widget))
        return d->style->drawPrimitive(element, option, painter, widget);

    bool animating = (option->state & State_Animating);
    int state = option->state;
    QRect rect = option->rect;
    QRect oldRect;
    QRect newRect;
    if (widget && (element == PE_PanelButtonTool) && !animating) {
        QWidget *w = const_cast<QWidget *> (widget);
        int oldState = w->property("_q_stylestate").toInt();
        oldRect = w->property("_q_stylerect").toRect();
        newRect = w->rect();
        w->setProperty("_q_stylestate", (int)option->state);
        w->setProperty("_q_stylerect", w->rect());

        // Determine the animated transition
        bool doTransition = ((state & State_On)         != (oldState & State_On)     ||
                             (state & State_MouseOver)  != (oldState & State_MouseOver));
        if (oldRect != newRect) {
            doTransition = false;
            d->animator.stopAnimation(widget);
        }

        if (doTransition) {
            QImage startImage(option->rect.size(), QImage::Format_ARGB32_Premultiplied);
            QImage endImage(option->rect.size(), QImage::Format_ARGB32_Premultiplied);
            Animation *anim = d->animator.widgetAnimation(widget);
            QStyleOption opt = *option;
            opt.state = (QStyle::State)oldState;
            opt.state |= (State)State_Animating;
            startImage.fill(0);
            Transition *t = new Transition;
            t->setWidget(w);
            QPainter startPainter(&startImage);
            if (!anim) {
                drawPrimitive(element, &opt, &startPainter, widget);
            } else {
                anim->paint(&startPainter, &opt);
                d->animator.stopAnimation(widget);
            }
            QStyleOption endOpt = *option;
            endOpt.state |= (State)State_Animating;
            t->setStartImage(startImage);
            d->animator.startAnimation(t);
            endImage.fill(0);
            QPainter endPainter(&endImage);
            drawPrimitive(element, &endOpt, &endPainter, widget);
            t->setEndImage(endImage);
            t->setDuration(130);
            t->setStartTime(QTime::currentTime());
        }
    }

    switch (element) {
    case PE_PanelLineEdit: {
        painter->save();
        if (option->state & State_Enabled)
            drawCornerImage(d->lineeditImage, painter, option->rect, 2, 2, 2, 2);
        else
            drawCornerImage(d->lineeditImage_disabled, painter, option->rect, 2, 2, 2, 2);

        if (option->state & State_HasFocus || option->state & State_MouseOver) {
            QColor hover = StyleHelper::baseColor();
            if (state & State_HasFocus)
                hover.setAlpha(100);
            else
                hover.setAlpha(50);

            painter->setPen(QPen(hover, 1));
            painter->drawRect(option->rect.adjusted(1, 1, -2 ,-2));
        }
        painter->restore();
    }
    break;

    case PE_FrameStatusBarItem:
        break;

    case PE_PanelButtonTool: {
        Animation *anim = d->animator.widgetAnimation(widget);
        if (!animating && anim) {
            anim->paint(painter, option);
        } else {
            bool pressed = option->state & State_Sunken || option->state & State_On;
            QColor shadow(0, 0, 0, 30);
            painter->setPen(shadow);
            if (pressed) {
                QColor shade(0, 0, 0, 40);
                painter->fillRect(rect, shade);
                painter->drawLine(rect.topLeft() + QPoint(1, 0), rect.topRight() - QPoint(1, 0));
                painter->drawLine(rect.topLeft(), rect.bottomLeft());
                painter->drawLine(rect.topRight(), rect.bottomRight());
                // painter->drawLine(rect.bottomLeft()  + QPoint(1, 0), rect.bottomRight()  - QPoint(1, 0));
                QColor highlight(255, 255, 255, 30);
                painter->setPen(highlight);
            } else if (option->state & State_Enabled &&
                       option->state & State_MouseOver) {
                QColor lighter(255, 255, 255, 37);
                painter->fillRect(rect, lighter);
            }
        }
    }
    break;

    case PE_PanelStatusBar: {
        painter->save();
        QLinearGradient grad(option->rect.topLeft(), QPoint(rect.center().x(), rect.bottom()));
        QColor startColor = StyleHelper::shadowColor().darker(164);
        QColor endColor = StyleHelper::baseColor().darker(130);
        grad.setColorAt(0, endColor);
        grad.setColorAt(1, endColor);
        painter->fillRect(option->rect, grad);
        painter->setPen(QColor(255, 255, 255, 60));
        painter->drawLine(rect.topLeft() + QPoint(0,1),
                          rect.topRight()+ QPoint(0,1));
        painter->setPen(StyleHelper::borderColor().darker(110));
        painter->drawLine(rect.topLeft(), rect.topRight());
        painter->restore();
    }
    break;

    case PE_IndicatorToolBarSeparator: {
        QColor separatorColor = StyleHelper::borderColor();
        separatorColor.setAlpha(100);
        painter->setPen(separatorColor);
        const int margin = 3;
        if (option->state & State_Horizontal) {
            const int offset = rect.width()/2;
            painter->drawLine(rect.bottomLeft().x() + offset,
                              rect.bottomLeft().y() - margin,
                              rect.topLeft().x() + offset,
                              rect.topLeft().y() + margin);
        } else { //Draw vertical separator
            const int offset = rect.height()/2;
            painter->setPen(QPen(option->palette.background().color().darker(110)));
            painter->drawLine(rect.topLeft().x() + margin ,
                              rect.topLeft().y() + offset,
                              rect.topRight().x() - margin,
                              rect.topRight().y() + offset);
        }
    }
    break;

    case PE_IndicatorToolBarHandle: {
        bool horizontal = option->state & State_Horizontal;
        painter->save();
        QPainterPath path;
        int x = option->rect.x() + horizontal ? 2 : 6;
        int y = option->rect.y() + horizontal ? 6 : 2;
        static const int RectHeight = 2;
        if (horizontal) {
            while (y < option->rect.height() - RectHeight - 6) {
                path.moveTo(x, y);
                path.addRect(x, y, RectHeight, RectHeight);
                y += 6;
            }
        } else {
            while (x < option->rect.width() - RectHeight - 6) {
                path.moveTo(x, y);
                path.addRect(x, y, RectHeight, RectHeight);
                x += 6;
            }
        }

        painter->setPen(Qt::NoPen);
        QColor dark = StyleHelper::borderColor();
        dark.setAlphaF(0.4);

        QColor light = StyleHelper::baseColor();
        light.setAlphaF(0.4);

        painter->fillPath(path, light);
        painter->save();
        painter->translate(1, 1);
        painter->fillPath(path, dark);
        painter->restore();
        painter->translate(3, 3);
        painter->fillPath(path, light);
        painter->translate(1, 1);
        painter->fillPath(path, dark);
        painter->restore();
    }
    break;
    case PE_IndicatorArrowUp:
    case PE_IndicatorArrowDown:
    case PE_IndicatorArrowRight:
    case PE_IndicatorArrowLeft: {
        // From windowsstyle but modified to enable AA
        if (option->rect.width() <= 1 || option->rect.height() <= 1)
            break;

        QRect r = option->rect;
        int size = qMin(r.height(), r.width());
        QPixmap pixmap;
        QString pixmapName;
        pixmapName.sprintf("%s-%s-%d-%d-%d-%lld",
                           "$qt_ia", metaObject()->className(),
                           uint(option->state), element,
                           size, option->palette.cacheKey());
        if (!QPixmapCache::find(pixmapName, pixmap)) {
            int border = size/5;
            int sqsize = 2*(size/2);
            QImage image(sqsize, sqsize, QImage::Format_ARGB32);
            image.fill(Qt::transparent);
            QPainter imagePainter(&image);
            imagePainter.setRenderHint(QPainter::Antialiasing, true);
            imagePainter.translate(0.5, 0.5);
            QPolygon a;
            switch (element) {
            case PE_IndicatorArrowUp:
                a.setPoints(3, border, sqsize/2,  sqsize/2, border,  sqsize - border, sqsize/2);
                break;
            case PE_IndicatorArrowDown:
                a.setPoints(3, border, sqsize/2,  sqsize/2, sqsize - border,  sqsize - border, sqsize/2);
                break;
            case PE_IndicatorArrowRight:
                a.setPoints(3, sqsize - border, sqsize/2,  sqsize/2, border,  sqsize/2, sqsize - border);
                break;
            case PE_IndicatorArrowLeft:
                a.setPoints(3, border, sqsize/2,  sqsize/2, border,  sqsize/2, sqsize - border);
                break;
            default:
                break;
            }

            int bsx = 0;
            int bsy = 0;

            if (option->state & State_Sunken) {
                bsx = pixelMetric(PM_ButtonShiftHorizontal);
                bsy = pixelMetric(PM_ButtonShiftVertical);
            }

            QRect bounds = a.boundingRect();
            int sx = sqsize / 2 - bounds.center().x() - 1;
            int sy = sqsize / 2 - bounds.center().y() - 1;
            imagePainter.translate(sx + bsx, sy + bsy);

            if (!(option->state & State_Enabled)) {
                QColor foreGround(150, 150, 150, 150);
                imagePainter.setBrush(option->palette.mid().color());
                imagePainter.setPen(option->palette.mid().color());
            } else {
                QColor shadow(0, 0, 0, 100);
                imagePainter.translate(0, 1);
                imagePainter.setPen(shadow);
                imagePainter.setBrush(shadow);
                QColor foreGround(255, 255, 255, 210);
                imagePainter.drawPolygon(a);
                imagePainter.translate(0, -1);
                imagePainter.setPen(foreGround);
                imagePainter.setBrush(foreGround);
            }
            imagePainter.drawPolygon(a);
            imagePainter.end();
            pixmap = QPixmap::fromImage(image);
            QPixmapCache::insert(pixmapName, pixmap);
        }
        int xOffset = r.x() + (r.width() - size)/2;
        int yOffset = r.y() + (r.height() - size)/2;
        painter->drawPixmap(xOffset, yOffset, pixmap);
    }
    break;

    default:
        d->style->drawPrimitive(element, option, painter, widget);
        break;
    }
}
Exemplo n.º 21
0
/*!
  Calculate the mask for the rubber band overlay

  \return Region for the mask
  \sa QWidget::setMask()
 */
QRegion QwtPicker::rubberBandMask() const
{
    QRegion mask;

    if ( !isActive() || rubberBand() == NoRubberBand ||
        rubberBandPen().style() == Qt::NoPen )
    {
        return mask;
    }

    const QPolygon pa = adjustedPoints( d_data->pickedPoints );

    QwtPickerMachine::SelectionType selectionType =
        QwtPickerMachine::NoSelection;

    if ( d_data->stateMachine )
        selectionType = d_data->stateMachine->selectionType();

    switch ( selectionType )
    {
        case QwtPickerMachine::NoSelection:
        case QwtPickerMachine::PointSelection:
        {
            if ( pa.count() < 1 )
                return mask;

            const QPoint pos = pa[0];
            const int pw = rubberBandPen().width();

            const QRect pRect = pickArea().boundingRect().toRect();
            switch ( rubberBand() )
            {
                case VLineRubberBand:
                {
                    mask += qwtMaskRegion( QLine( pos.x(), pRect.top(),
                        pos.x(), pRect.bottom() ), pw );
                    break;
                }
                case HLineRubberBand:
                {
                    mask += qwtMaskRegion( QLine( pRect.left(), pos.y(),
                        pRect.right(), pos.y() ), pw );
                    break;
                }
                case CrossRubberBand:
                {
                    mask += qwtMaskRegion( QLine( pos.x(), pRect.top(),
                        pos.x(), pRect.bottom() ), pw );
                    mask += qwtMaskRegion( QLine( pRect.left(), pos.y(),
                        pRect.right(), pos.y() ), pw );
                    break;
                }
                default:
                    break;
            }
            break;
        }
        case QwtPickerMachine::RectSelection:
        {
            if ( pa.count() < 2 )
                return mask;

            const int pw = rubberBandPen().width();

            switch ( rubberBand() )
            {
                case RectRubberBand:
                {
                    const QRect r = QRect( pa.first(), pa.last() );
                    mask = qwtMaskRegion( r.normalized(), pw );
                    break;
                }
                case EllipseRubberBand:
                {
                    const QRect r = QRect( pa.first(), pa.last() );
                    mask += r.adjusted( -pw, -pw, pw, pw );
                    break;
                }
                default:
                    break;
            }
            break;
        }
        case QwtPickerMachine::PolygonSelection:
        {
            const int pw = rubberBandPen().width();
            if ( pw <= 1 )
            {
                // because of the join style we better
                // return a mask for a pen width <= 1 only

                const int off = 2 * pw;
                const QRect r = pa.boundingRect();
                mask += r.adjusted( -off, -off, off, off );
            }
            break;
        }
        default:
            break;
    }

    return mask;
}