QT_BEGIN_NAMESPACE

QList<QNetworkProxy> QNetworkProxyFactory::systemProxyForQuery(const QNetworkProxyQuery &)
{
    QList<QNetworkProxy> proxyList;

    QByteArray proxy_env = qgetenv("http_proxy");
    if (!proxy_env.isEmpty()) {
        QUrl url = QUrl(QString::fromLocal8Bit(proxy_env));
        if (url.scheme() == QLatin1String("socks5")) {
            QNetworkProxy proxy(QNetworkProxy::Socks5Proxy, url.host(),
                    url.port() ? url.port() : 1080, url.userName(), url.password());
            proxyList << proxy;
        } else if (url.scheme() == QLatin1String("socks5h")) {
            QNetworkProxy proxy(QNetworkProxy::Socks5Proxy, url.host(),
                    url.port() ? url.port() : 1080, url.userName(), url.password());
            proxy.setCapabilities(QNetworkProxy::HostNameLookupCapability);
            proxyList << proxy;
        } else if (url.scheme() == QLatin1String("http") || url.scheme().isEmpty()) {
            QNetworkProxy proxy(QNetworkProxy::HttpProxy, url.host(),
                    url.port() ? url.port() : 8080, url.userName(), url.password());
            proxyList << proxy;
        }
    }
    if (proxyList.isEmpty())
        proxyList << QNetworkProxy::NoProxy;

    return proxyList;
}
Exemplo n.º 2
0
void OwncloudHttpCredsPage::initializePage()
{
    WizardCommon::initErrorLabel(_ui.errorLabel);

    OwncloudWizard* ocWizard = qobject_cast< OwncloudWizard* >(wizard());
    AbstractCredentials *cred = ocWizard->account()->credentials();
    HttpCredentials *httpCreds = qobject_cast<HttpCredentials*>(cred);
    if (httpCreds) {
        const QString user = httpCreds->fetchUser();
        if (!user.isEmpty()) {
            _ui.leUsername->setText(user);
        }
    } else {
        QUrl url = ocWizard->account()->url();

        // If the final url does not have a username, check the
        // user specified url too. Sometimes redirects can lose
        // the user:pw information.
        if (url.userName().isEmpty()) {
            url = ocWizard->ocUrl();
        }

        const QString user = url.userName();
        const QString password = url.password();

        if(!user.isEmpty()) {
            _ui.leUsername->setText(user);
        }
        if(!password.isEmpty()) {
            _ui.lePassword->setText(password);
        }
    }
    _ui.leUsername->setFocus();
}
Exemplo n.º 3
0
void FileDownloader::download(QUrl url) {
	QHttp::ConnectionMode mode = url.scheme().toLower() == "https" ? QHttp::ConnectionModeHttps : QHttp::ConnectionModeHttp;
	http->setHost(url.host(), mode, url.port() == -1 ? 0 : url.port());
    
	if (!url.userName().isEmpty())
		http->setUser(url.userName(), url.password());

	http_request_aborted = false;
	http_get_id = http->get(url.path(), &buffer);

	setLabelText(tr("Downloading %1").arg(url.toString()));
}
Exemplo n.º 4
0
bool db_open(QUrl dburl)
{
    QSqlDatabase db;
    db.removeDatabase("vengeance");



    if(dburl.scheme().isEmpty())
       db=QSqlDatabase::addDatabase("QMYSQL","vengeance");
    else
       db=QSqlDatabase::addDatabase(dburl.scheme(),"vengeance");


    if(dburl.host().isEmpty())
        db.setHostName("localhost");
    else
        db.setHostName(dburl.host());

    db.setDatabaseName(dburl.path().replace("/",""));

    db.setUserName(dburl.userName());
    db.setPassword(dburl.password());



    bool w=db.open();

    if(!w)
    {
        qDebug()<<db.lastError ();
    }

    return w;
}
Exemplo n.º 5
0
QString QUrlProto::userName() const
{
  QUrl *item = qscriptvalue_cast<QUrl*>(thisObject());
  if (item)
    return item->userName();
  return QString();
}
Exemplo n.º 6
0
/*!
  \a url points to the new WAP gateway.

  \sa gateway()
*/
void QWapAccount::setGateway( const QUrl& url )
{
    d->conf->setValue( QLatin1String("Wap/Gateway"), url.host() );
    d->conf->setValue( QLatin1String("Wap/UserName"), url.userName() );
    d->conf->setValue( QLatin1String("Wap/Password"), url.password() );
    d->conf->setValue( QLatin1String("Wap/Port"), url.port() );
}
void QNetworkAccessAuthenticationManager::cacheCredentials(const QUrl &url,
                                                  const QAuthenticator *authenticator)
{
    Q_ASSERT(authenticator);
    QString domain = QString::fromLatin1("/"); // FIXME: make QAuthenticator return the domain
    QString realm = authenticator->realm();

    QMutexLocker mutexLocker(&mutex);

    // Set two credentials actually: one with and one without the username in the URL
    QUrl copy = url;
    copy.setUserName(authenticator->user());
    do {
        QByteArray cacheKey = authenticationKey(copy, realm);
        if (authenticationCache.hasEntry(cacheKey)) {
            QNetworkAuthenticationCache *auth =
                static_cast<QNetworkAuthenticationCache *>(authenticationCache.requestEntryNow(cacheKey));
            auth->insert(domain, authenticator->user(), authenticator->password());
            authenticationCache.releaseEntry(cacheKey);
        } else {
            QNetworkAuthenticationCache *auth = new QNetworkAuthenticationCache;
            auth->insert(domain, authenticator->user(), authenticator->password());
            authenticationCache.addEntry(cacheKey, auth);
        }

        if (copy.userName().isEmpty()) {
            break;
        } else {
            copy.setUserName(QString());
        }
    } while (true);
}
Exemplo n.º 8
0
void DrawpileApp::openUrl(QUrl url)
{
    // See if there is an existing replacable window
    MainWindow *win = nullptr;
    for(QWidget *widget : topLevelWidgets()) {
        MainWindow *mw = qobject_cast<MainWindow*>(widget);
        if(mw && mw->canReplace()) {
            win = mw;
            break;
        }
    }

    // No? Create a new one
    if(!win)
        win = new MainWindow;

    if(url.scheme() == "drawpile") {
        // Our own protocol: connect to a session

        if(url.userName().isEmpty()) {
            // Set username if not specified
            QSettings cfg;
            url.setUserName(cfg.value("history/username").toString());
        }
        win->joinSession(url);

    } else {
        // Other protocols: load image
        win->openUrl(url);
    }
}
Exemplo n.º 9
0
QList<QNetworkProxy> PackageManagerProxyFactory::queryProxy(const QNetworkProxyQuery &query)
{
    const Settings &settings = m_core->settings();
    QList<QNetworkProxy> list;

    if (settings.proxyType() == Settings::SystemProxy) {
#if defined(Q_OS_UNIX) && !defined(Q_OS_OSX)
        QUrl proxyUrl = QUrl::fromUserInput(QString::fromUtf8(qgetenv("http_proxy")));
        if (proxyUrl.isValid()) {
            return list << QNetworkProxy(QNetworkProxy::HttpProxy, proxyUrl.host(), proxyUrl.port(),
                proxyUrl.userName(), proxyUrl.password());
        }
#endif
        return QNetworkProxyFactory::systemProxyForQuery(query);
    }

    if ((settings.proxyType() == Settings::NoProxy))
        return list << QNetworkProxy(QNetworkProxy::NoProxy);

    if (query.queryType() == QNetworkProxyQuery::UrlRequest) {
        if (query.url().scheme() == QLatin1String("ftp"))
            return list << settings.ftpProxy();

        if ((query.url().scheme() == QLatin1String("http"))
            || (query.url().scheme() == QLatin1String("https"))) {
                return list << settings.httpProxy();
            }
    }
    return list << QNetworkProxy(QNetworkProxy::DefaultProxy);
}
Exemplo n.º 10
0
void Transfers::dropSlsk(const QList<QUrl>& l) {
	QList<QUrl>::const_iterator it = l.begin();
	for(; it != l.end(); ++it) {
		QUrl url = *it;
		if(url.scheme() == "slsk" && !url.host().isEmpty() && !url.path().isEmpty()) {
            // Try to find a size
			qint64 size = 0;
            bool ok;
            size = url.password().toLongLong(&ok);
            if(! ok)
				size = 0;

            // Find the user name
            QString user = url.userName();
			if (user.isEmpty())
                user = url.host();

            // Find the path (folder or file)
			QString path = url.path().replace("/", "\\");

			if(path.right(1) == "\\")
				museeq->downloadFolder(user, QString(path));
			else
				museeq->downloadFile(user, QString(path), size);
		}
	}
}
Exemplo n.º 11
0
static void setApplicationProxy(QUrl url)
{
    if (!url.isEmpty())
    {
        if (url.port() == -1)
            url.setPort(8080);
        QNetworkProxy proxy(QNetworkProxy::HttpProxy, url.host(), url.port(), url.userName(), url.password());
        QNetworkProxy::setApplicationProxy(proxy);
    }
}
Exemplo n.º 12
0
Arquivo: amqp.cpp Projeto: d---/QAMQP
void ClientPrivate::parseCnnString(const QUrl &con) {
	P_Q(QAMQP::Client);
	if (con.scheme() == AMQPSCHEME || con.scheme() == AMQPSSCHEME) 	{
		q->setSsl(con.scheme() == AMQPSSCHEME);
		q->setPassword(con.password());
		q->setUser(con.userName());
		q->setPort(con.port());
		q->setHost(con.host());				
		q->setVirtualHost(con.path());
	}
}
Exemplo n.º 13
0
void QNetworkAccessManagerPrivate::authenticationRequired(QNetworkAccessBackend *backend,
                                                          QAuthenticator *authenticator)
{
    Q_Q(QNetworkAccessManager);

    // FIXME: Add support for domains (i.e., the leading path)
    QUrl url = backend->reply->url;

    // don't try the cache for the same URL twice in a row
    // being called twice for the same URL means the authentication failed
    // also called when last URL is empty, e.g. on first call
    if (backend->reply->urlForLastAuthentication.isEmpty()
            || url != backend->reply->urlForLastAuthentication) {
        // if credentials are included in the url, then use them
        if (!url.userName().isEmpty()
            && !url.password().isEmpty()) {
            authenticator->setUser(url.userName());
            authenticator->setPassword(url.password());
            backend->reply->urlForLastAuthentication = url;
            authenticationManager->cacheCredentials(url, authenticator);
            return;
        }

        QNetworkAuthenticationCredential cred = authenticationManager->fetchCachedCredentials(url, authenticator);
        if (!cred.isNull()) {
            authenticator->setUser(cred.user);
            authenticator->setPassword(cred.password);
            backend->reply->urlForLastAuthentication = url;
            return;
        }
    }

    // if we emit a signal here in synchronous mode, the user might spin
    // an event loop, which might recurse and lead to problems
    if (backend->isSynchronous())
        return;

    backend->reply->urlForLastAuthentication = url;
    emit q->authenticationRequired(backend->reply->q_func(), authenticator);
    authenticationManager->cacheCredentials(url, authenticator);
}
Exemplo n.º 14
0
QString SFtpConnectionCache::getKey(const QUrl &url) const
{
    QString key;

    key.append(url.userName());
    key.append("@");
    key.append(url.host());
    key.append(":");
    key.append(QString::number(url.port()));

    return key;
}
Exemplo n.º 15
0
    void setUrl(const QUrl &url)
    {
        QString hdr;
        hdr = QString("GET %PATH% HTTP/1.1\r\n"
                      "Host: %HOST%\r\n"
                      "User-Agent: MythMusic/%VERSION%\r\n"
                      "Accept: */*\r\n");

        QString path = url.path();
        QString host = url.host();

        if (path.isEmpty())
            path = "/";

        if (url.hasQuery())
            path += '?' + url.encodedQuery();

        if (url.port() != -1)
            host += QString(":%1").arg(url.port());

        hdr.replace("%PATH%", path);
        hdr.replace("%HOST%", host);
        hdr.replace("%VERSION%", MYTH_BINARY_VERSION);

        if (!url.userName().isEmpty() && !url.password().isEmpty()) 
        {
            QString authstring = url.userName() + ":" + url.password();
            QString auth = QCodecs::base64Encode(authstring.toLocal8Bit());

            hdr += "Authorization: Basic " + auth + "\r\n";
        }

        hdr += QString("TE: trailers\r\n"
                       "Icy-Metadata: 1\r\n"
                       "\r\n");

        LOG(VB_NETWORK, LOG_INFO, QString("ShoutCastRequest: '%1'").arg(hdr));

        m_data = hdr.toAscii();
    }
Exemplo n.º 16
0
void Config::setSystemProxy(bool checked)
{
    ui.proxyPort->setEnabled(!checked);
    ui.proxyHost->setEnabled(!checked);
    ui.proxyUser->setEnabled(!checked);
    ui.proxyPass->setEnabled(!checked);
    if(checked) {
        // save values in input box
        proxy.setScheme("http");
        proxy.setUserName(ui.proxyUser->text());
        proxy.setPassword(ui.proxyPass->text());
        proxy.setHost(ui.proxyHost->text());
        proxy.setPort(ui.proxyPort->text().toInt());
        // show system values in input box
        QUrl envproxy = System::systemProxy();
        qDebug() << "[Config] setting system proxy" << envproxy;

        ui.proxyHost->setText(envproxy.host());
        ui.proxyPort->setText(QString("%1").arg(envproxy.port()));
        ui.proxyUser->setText(envproxy.userName());
        ui.proxyPass->setText(envproxy.password());

        if(envproxy.host().isEmpty() || envproxy.port() == -1) {
            qDebug() << "[Config] sytem proxy is invalid.";
            QMessageBox::warning(this, tr("Proxy Detection"),
                    tr("The System Proxy settings are invalid!\n"
                        "Rockbox Utility can't work with this proxy settings. "
                        "Make sure the system proxy is set correctly. Note that "
                        "\"proxy auto-config (PAC)\" scripts are not supported by "
                        "Rockbox Utility. If your system uses this you need "
                        "to use manual proxy settings."),
                    QMessageBox::Ok ,QMessageBox::Ok);
            // the current proxy settings are invalid. Check the saved proxy
            // type again.
            if(RbSettings::value(RbSettings::ProxyType).toString() == "manual")
                ui.radioManualProxy->setChecked(true);
            else
                ui.radioNoProxy->setChecked(true);
        }

    }
    else {
        ui.proxyHost->setText(proxy.host());
        if(proxy.port() > 0)
            ui.proxyPort->setText(QString("%1").arg(proxy.port()));
        else ui.proxyPort->setText("");
        ui.proxyUser->setText(proxy.userName());
        ui.proxyPass->setText(proxy.password());
    }

}
Exemplo n.º 17
0
void IgnoreList::slotDropSlsk(const QList<QUrl>& l) {
	QList<QUrl>::const_iterator it = l.begin();
	for(; it != l.end(); ++it) {
		QUrl url = QUrl(*it);
		if(url.scheme() == "slsk" && !url.host().isEmpty()) {
			QString user = url.userName();
			if (user.isEmpty())
                user = url.host();

			if (!mUserList->findItem(user))
                editComments(user);
		}
	}
}
Exemplo n.º 18
0
void
IrcAbstractChannel::Link (const QUrl & url)
{
#if 0
  if (url.scheme () == "ircsender") {
    QString msg = ui.textEnter->text ();
    msg.append (url.userName());
    msg.append (": ");
    ui.textEnter->setText (msg);
  } else {
    QDesktopServices::openUrl (url);
  }
#endif
}
Exemplo n.º 19
0
    void setUrl(const QUrl &url)
    {
        QString hdr;
        hdr = QString("GET %1 HTTP/1.1\r\n"
                      "Host: %2\r\n"
                      "User-Agent: mythmusic/svn\r\n"
                      "Keep-Alive:\r\n"
                      "Connection: TE, Keep-Alive\r\n").arg(url.path()).arg(url.host());

        if (!url.userName().isEmpty() && !url.password().isEmpty()) 
        {
            QString authstring = url.userName() + ":" + url.password();
            QString auth = QCodecs::base64Encode(authstring.toLocal8Bit());

            hdr += "Authorization: Basic " + auth;
        }

        hdr += QString("TE: trailers\r\n"
                       "icy-metadata:1\r\n"
                       "\r\n");

        m_data = hdr;
    }
Exemplo n.º 20
0
//-----------------------------------------------------------------------------
bool CloneDialog::run(QWidget *parent, QUrl &url, QString &repository)
{
	CloneDialog dlg(parent);

	// Try to parse a url from the clipboard
	QClipboard *clipboard = QApplication::clipboard();
	if(clipboard)
	{
		QUrl nurl = QUrl::fromUserInput(clipboard->text());

		// If we have a valid url
		if(nurl.isValid() && !nurl.isEmpty())
		{
			// Fill in dialog
			dlg.ui->lineUserName->setText(nurl.userName());
			dlg.ui->linePassword->setText(nurl.password());
			nurl.setUserName("");
			nurl.setPassword("");
			dlg.ui->lineURL->setText(nurl.toString());
		}
	}

	if(dlg.exec() != QDialog::Accepted)
		return false;

	url.setUrl(dlg.ui->lineURL->text());
	if(url.isEmpty() || !url.isValid())
	{
		QMessageBox::critical(parent, tr("Error"), tr("Invalid URL."), QMessageBox::Ok );
		return false;
	}

	url.setUserName(dlg.ui->lineUserName->text());
	url.setPassword(dlg.ui->linePassword->text());

	if(dlg.ui->lineRepository->text().isEmpty() )
	{
		QMessageBox::critical(parent, tr("Error"), tr("Invalid Repository File."), QMessageBox::Ok );
		return false;
	}

	repository = dlg.ui->lineRepository->text();
	return true;
}
Exemplo n.º 21
0
void
IrcAbstractChannel::ActivatedCookedLink (const QString & link)
{
  QUrl url (link);
  if (url.scheme () == "ircsender") {
    if (qmlItem) {
      QVariant msgVar;
      QMetaObject::invokeMethod (qmlItem, "userData",
         Q_RETURN_ARG (QVariant, msgVar));
      QString msg (msgVar.toString());
      msg.append (url.userName());
      msg.append (": ");
      QMetaObject::invokeMethod (qmlItem, "writeUserData",
         Q_ARG (QVariant, msg));
    }
  } else {
    QDesktopServices::openUrl (url);
  }
}
Exemplo n.º 22
0
bool QHttpNetworkConnectionChannel::sendRequest()
{
    if (!reply) {
        // heh, how should that happen!
        qWarning() << "QHttpNetworkConnectionChannel::sendRequest() called without QHttpNetworkReply";
        state = QHttpNetworkConnectionChannel::IdleState;
        return false;
    }

    switch (state) {
    case QHttpNetworkConnectionChannel::IdleState: { // write the header
        if (!ensureConnection()) {
            // wait for the connection (and encryption) to be done
            // sendRequest will be called again from either
            // _q_connected or _q_encrypted
            return false;
        }
        written = 0; // excluding the header
        bytesTotal = 0;

        QHttpNetworkReplyPrivate *replyPrivate = reply->d_func();
        replyPrivate->clear();
        replyPrivate->connection = connection;
        replyPrivate->connectionChannel = this;
        replyPrivate->autoDecompress = request.d->autoDecompress;
        replyPrivate->pipeliningUsed = false;

        // if the url contains authentication parameters, use the new ones
        // both channels will use the new authentication parameters
        if (!request.url().userInfo().isEmpty() && request.withCredentials()) {
            QUrl url = request.url();
            QAuthenticator &auth = authenticator;
            if (url.userName() != auth.user()
                || (!url.password().isEmpty() && url.password() != auth.password())) {
                auth.setUser(url.userName());
                auth.setPassword(url.password());
                connection->d_func()->copyCredentials(connection->d_func()->indexOf(socket), &auth, false);
            }
            // clear the userinfo,  since we use the same request for resending
            // userinfo in url can conflict with the one in the authenticator
            url.setUserInfo(QString());
            request.setUrl(url);
        }
        // Will only be false if QtWebKit is performing a cross-origin XMLHttpRequest
        // and withCredentials has not been set to true.
        if (request.withCredentials())
            connection->d_func()->createAuthorization(socket, request);
#ifndef QT_NO_NETWORKPROXY
        QByteArray header = QHttpNetworkRequestPrivate::header(request,
            (connection->d_func()->networkProxy.type() != QNetworkProxy::NoProxy));
#else
        QByteArray header = QHttpNetworkRequestPrivate::header(request, false);
#endif
        socket->write(header);
        // flushing is dangerous (QSslSocket calls transmit which might read or error)
//        socket->flush();
        QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice();
        if (uploadByteDevice) {
            // connect the signals so this function gets called again
            QObject::connect(uploadByteDevice, SIGNAL(readyRead()),this, SLOT(_q_uploadDataReadyRead()));

            bytesTotal = request.contentLength();

            state = QHttpNetworkConnectionChannel::WritingState; // start writing data
            sendRequest(); //recurse
        } else {
            state = QHttpNetworkConnectionChannel::WaitingState; // now wait for response
            sendRequest(); //recurse
        }

        break;
    }
    case QHttpNetworkConnectionChannel::WritingState:
    {
        // write the data
        QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice();
        if (!uploadByteDevice || bytesTotal == written) {
            if (uploadByteDevice)
                emit reply->dataSendProgress(written, bytesTotal);
            state = QHttpNetworkConnectionChannel::WaitingState; // now wait for response
            sendRequest(); // recurse
            break;
        }

        // only feed the QTcpSocket buffer when there is less than 32 kB in it
        const qint64 socketBufferFill = 32*1024;
        const qint64 socketWriteMaxSize = 16*1024;


#ifndef QT_NO_OPENSSL
        QSslSocket *sslSocket = qobject_cast<QSslSocket*>(socket);
        // if it is really an ssl socket, check more than just bytesToWrite()
        while ((socket->bytesToWrite() + (sslSocket ? sslSocket->encryptedBytesToWrite() : 0))
                <= socketBufferFill && bytesTotal != written)
#else
        while (socket->bytesToWrite() <= socketBufferFill
               && bytesTotal != written)
#endif
        {
            // get pointer to upload data
            qint64 currentReadSize = 0;
            qint64 desiredReadSize = qMin(socketWriteMaxSize, bytesTotal - written);
            const char *readPointer = uploadByteDevice->readPointer(desiredReadSize, currentReadSize);

            if (currentReadSize == -1) {
                // premature eof happened
                connection->d_func()->emitReplyError(socket, reply, QNetworkReply::UnknownNetworkError);
                return false;
                break;
            } else if (readPointer == 0 || currentReadSize == 0) {
                // nothing to read currently, break the loop
                break;
            } else {
                qint64 currentWriteSize = socket->write(readPointer, currentReadSize);
                if (currentWriteSize == -1 || currentWriteSize != currentReadSize) {
                    // socket broke down
                    connection->d_func()->emitReplyError(socket, reply, QNetworkReply::UnknownNetworkError);
                    return false;
                } else {
                    written += currentWriteSize;
                    uploadByteDevice->advanceReadPointer(currentWriteSize);

                    emit reply->dataSendProgress(written, bytesTotal);

                    if (written == bytesTotal) {
                        // make sure this function is called once again
                        state = QHttpNetworkConnectionChannel::WaitingState;
                        sendRequest();
                        break;
                    }
                }
            }
        }
        break;
    }

    case QHttpNetworkConnectionChannel::WaitingState:
    {
        QNonContiguousByteDevice* uploadByteDevice = request.uploadByteDevice();
        if (uploadByteDevice) {
            QObject::disconnect(uploadByteDevice, SIGNAL(readyRead()), this, SLOT(_q_uploadDataReadyRead()));
        }

        // HTTP pipelining
        //connection->d_func()->fillPipeline(socket);
        //socket->flush();

        // ensure we try to receive a reply in all cases, even if _q_readyRead_ hat not been called
        // this is needed if the sends an reply before we have finished sending the request. In that
        // case receiveReply had been called before but ignored the server reply
        if (socket->bytesAvailable())
            QMetaObject::invokeMethod(this, "_q_receiveReply", Qt::QueuedConnection);
        break;
    }
    case QHttpNetworkConnectionChannel::ReadingState:
        // ignore _q_bytesWritten in these states
        // fall through
    default:
        break;
    }
    return true;
}
Exemplo n.º 23
0
ServerItem *ServerItem::fromMimeData(const QMimeData *mime, bool default_name, QWidget *p) {
	if (mime->hasFormat(QLatin1String("OriginatedInMumble")))
		return NULL;

	QUrl url;
	if (mime->hasUrls() && ! mime->urls().isEmpty())
		url = mime->urls().at(0);
	else if (mime->hasText())
		url = QUrl::fromEncoded(mime->text().toUtf8());

	QString qsFile = url.toLocalFile();
	if (! qsFile.isEmpty()) {
		QFile f(qsFile);
		// Make sure we don't accidently read something big the user
		// happened to have in his clipboard. We only want to look
		// at small link files.
		if (f.open(QIODevice::ReadOnly) && f.size() < 10240) {
			QByteArray qba = f.readAll();
			f.close();

			url = QUrl::fromEncoded(qba, QUrl::StrictMode);
			if (! url.isValid()) {
				QSettings qs(qsFile, QSettings::IniFormat);
				url = QUrl::fromEncoded(qs.value(QLatin1String("InternetShortcut/URL")).toByteArray(), QUrl::StrictMode);
			}
		}
	}

#if QT_VERSION >= 0x050000
	QUrlQuery query(url);
#endif

	if (! url.isValid() || (url.scheme() != QLatin1String("mumble")))
		return NULL;

	if (url.userName().isEmpty()) {
		if (g.s.qsUsername.isEmpty()) {
			bool ok;
			QString defUserName = QInputDialog::getText(p, ConnectDialog::tr("Adding host %1").arg(url.host()), ConnectDialog::tr("Enter username"), QLineEdit::Normal, g.s.qsUsername, &ok).trimmed();
			if (! ok)
				return NULL;
			if (defUserName.isEmpty())
				return NULL;
			g.s.qsUsername = defUserName;
		}
		url.setUserName(g.s.qsUsername);
	}

#if QT_VERSION >= 0x050000
	if (! query.hasQueryItem(QLatin1String("title")) && default_name)
		query.addQueryItem(QLatin1String("title"), url.host());

	ServerItem *si = new ServerItem(query.queryItemValue(QLatin1String("title")), url.host(), static_cast<unsigned short>(url.port(DEFAULT_MUMBLE_PORT)), url.userName(), url.password());

	if (query.hasQueryItem(QLatin1String("url")))
		si->qsUrl = query.queryItemValue(QLatin1String("url"));
#else
	if (! url.hasQueryItem(QLatin1String("title")) && default_name)
		url.addQueryItem(QLatin1String("title"), url.host());

	ServerItem *si = new ServerItem(url.queryItemValue(QLatin1String("title")), url.host(), static_cast<unsigned short>(url.port(DEFAULT_MUMBLE_PORT)), url.userName(), url.password());

	if (url.hasQueryItem(QLatin1String("url")))
		si->qsUrl = url.queryItemValue(QLatin1String("url"));
#endif

	return si;
}
Exemplo n.º 24
0
int main(int argc, char *argv[])
{
#ifdef MINEFLAYER_GUI_ON
    QApplication a(argc, argv);
#else
    QCoreApplication a(argc, argv);
#endif

    // parse arguments
    bool script_debug = false;
    bool headless = true;
    QString script_filename;
    QStringList script_args;
    QUrl url = QUrl::fromUserInput("mineflayer@localhost:25565");
    QString password;

    // set up lib path
    QStringList lib_path;
    lib_path << QDir::currentPath();

    QString env_path = QString::fromAscii(std::getenv("MINEFLAYER_LIB"));
    if (! env_path.isNull()) {
        lib_path << env_path.split(":");
    }

    QStringList args = a.arguments();
    for (int i = 1; i < args.size(); i++) {
        QString arg = args.at(i);
        if (arg == "--debug") {
            script_debug = true;
        } else if (arg == "--3d") {
            headless = false;
        } else if (arg.startsWith("-I")) {
            lib_path.append(arg.mid(2));
        } else if (arg == "--url") {
            if (i+1 >= args.size()) {
                qWarning() << "Need url parameter after --url option.";
                printUsage(args.at(0));
                return -1;
            }
            QUrl new_url = QUrl::fromUserInput(args.at(++i));
            if (new_url.userName().isEmpty())
                new_url.setUserName(url.userName());
            if (new_url.host().isEmpty())
                new_url.setHost(url.host());
            new_url.setPort(new_url.port(url.port()));
            if (! new_url.password().isEmpty())
                password = new_url.password();
            url = new_url;
        } else if (arg == "--password") {
            if (i+1 >= args.size()) {
                qWarning() << "Need password parameter after --password option.";
                printUsage(args.at(0));
                return -1;
            }
            password = args.at(++i);
        } else if (arg.startsWith("--")) {
            qWarning() << "Unrecognized option: " << arg;
            printUsage(args.at(0));
            return -1;
        } else {
            script_filename = arg;
            // all the rest of the args get exposed to the script api
            script_args.append(args.mid(i + 1));
            break;
        }
    }

    lib_path.prepend(QFileInfo(script_filename).dir().absolutePath());
    if (env_path.isNull()) {
       // default lib path
       lib_path << "/usr/lib/mineflayer"; // linux
       lib_path << a.applicationDirPath() + "/lib"; // windows
   }

    url.setPassword(password);

    MetaTypes::registerMetaTypes();
    Item::initializeStaticData();

#ifndef MINEFLAYER_3D_ON
    if (! headless)
        qWarning() << "3D support was not compiled in. You cannot use the 3D client.";
#endif
#ifndef MINEFLAYER_GUI_ON
    if (script_debug) {
        qWarning() << "Gui support was not compiled in. You cannot use the debugger.";
        script_debug = false;
    }
#endif

    if (! script_filename.isEmpty()) {
        ScriptRunner runner(url, script_filename, script_args, script_debug, headless, lib_path);
        runner.bootstrap();
        if (headless)
            return a.exec();
    }

#ifdef MINEFLAYER_3D_ON
    MainWindow w(url);
    return w.exec();
#else
    printUsage(args.at(0));
    return 1;
#endif
}
Exemplo n.º 25
0
int Url::userName ( lua_State * L )// const : QString
{
	QUrl* lhs = ValueInstaller2<QUrl>::check( L, 1 );
	lua_pushstring(L, lhs->userName().toLatin1() );
	return 1;
}
Exemplo n.º 26
0
int main(int argc, char* argv[])
{
    terrama2::core::initializeTerraMA();

    std::cout << "NOT WORKING" << std::endl;
    return 1;

    {
        QUrl uri;
        uri.setScheme("postgis");
        uri.setHost(QString::fromStdString(TERRAMA2_DATABASE_HOST));
        uri.setPort(std::stoi(TERRAMA2_DATABASE_PORT));
        uri.setUserName(QString::fromStdString(TERRAMA2_DATABASE_USERNAME));
        uri.setPassword(QString::fromStdString(TERRAMA2_DATABASE_PASSWORD));
        uri.setPath(QString::fromStdString("/"+TERRAMA2_DATABASE_DBNAME));

        //DataProvider information
        terrama2::core::DataProvider* dataProvider = new terrama2::core::DataProvider();
        terrama2::core::DataProviderPtr dataProviderPtr(dataProvider);
        dataProvider->uri = uri.url().toStdString();
        dataProvider->intent = terrama2::core::DataProviderIntent::COLLECTOR_INTENT;
        dataProvider->dataProviderType = "POSTGIS";
        dataProvider->active = true;

        //DataSeries information
        terrama2::core::DataSeries* dataSeries = new terrama2::core::DataSeries();
        terrama2::core::DataSeriesPtr dataSeriesPtr(dataSeries);
        auto& semanticsManager = terrama2::core::SemanticsManager::getInstance();
        dataSeries->semantics = semanticsManager.getSemantics("DCP-postgis");

        //DataSet information
        terrama2::core::DataSetDcp* dataSet = new terrama2::core::DataSetDcp();
        dataSet->active = true;
        dataSet->format.emplace("table_name", "inpe");
        dataSet->format.emplace("timestamp_property", "datetime");

        dataSeries->datasetList.emplace_back(dataSet);

        //accessing data
        terrama2::core::DataAccessorDcpPostGIS accessor(dataProviderPtr, dataSeriesPtr);
        //empty filter
        terrama2::core::Filter filter;
        filter.lastValue = true;
        terrama2::core::DcpSeriesPtr dcpSeries = accessor.getDcpSeries(filter);
        std::cout << "\nLast data timestamp: " << accessor.lastDateTime()->toString() << std::endl;

        assert(dcpSeries->dcpSeriesMap().size() == 1);

        auto datasetSeries = (*dcpSeries->dcpSeriesMap().begin()).second;
        std::shared_ptr<te::da::DataSet> teDataSet = datasetSeries.syncDataSet->dataset();



        std::string tableName = dataSet->format["table_name"];

        // creates a DataSource to the data and filters the dataset,
        // also joins if the DCP comes from separated files
        std::shared_ptr<te::da::DataSource> datasource(te::da::DataSourceFactory::make("POSTGIS"));

        std::map<std::string, std::string> connInfo {{"PG_HOST", uri.host().toStdString()},
            {"PG_PORT", std::to_string(uri.port())},
            {"PG_USER", uri.userName().toStdString()},
            {"PG_PASSWORD", uri.password().toStdString()},
            {"PG_DB_NAME", uri.path().section("/", 1, 1).toStdString()},
            {"PG_CONNECT_TIMEOUT", "4"},
            {"PG_CLIENT_ENCODING", "UTF-8"}
        };

        datasource->setConnectionInfo(connInfo);

        // RAII for open/closing the datasource
        terrama2::core::OpenClose<std::shared_ptr<te::da::DataSource>> openClose(datasource);

        // get a transactor to interact to the data source
        std::shared_ptr<te::da::DataSourceTransactor> transactor(datasource->getTransactor());

        auto primaryKey = datasetSeries.teDataSetType->getPrimaryKey();
        assert(primaryKey);
        assert(!teDataSet->isEmpty());

        auto pkName = primaryKey->getName();
        std::string sql("DELETE FROM " +tableName+" WHERE "+pkName+" NOT IN (");

        auto pos = datasetSeries.teDataSetType->getPropertyPosition(pkName);

        teDataSet->moveBeforeFirst();
        while (teDataSet->moveNext())
        {
            sql+=std::to_string(teDataSet->getInt32(pos))+",";
        }
        sql.pop_back();
        sql+=")";

        transactor->execute(sql);


        std::cout << "dataset size: " << teDataSet->size() << std::endl;
    }

    terrama2::core::finalizeTerraMA();

    return 0;
}
Exemplo n.º 27
0
int main(int argc, char **argv) {
    QCoreApplication app(argc, argv);

    CmdOptions options;
    options.silent = false;
    options.trustSSL = false;
    options.useNetrc = false;
    options.interactive = true;
    ClientProxy clientProxy;

    parseOptions( app.arguments(), &options );


    QUrl url = QUrl::fromUserInput(options.target_url);    

    // Fetch username and password. If empty, try to retrieve
    // from URL and strip URL
    QString user;
    QString password;

    if (options.useNetrc) {
        NetrcParser parser;
        if (parser.parse()) {
            NetrcParser::LoginPair pair = parser.find(url.host());
            user = pair.first;
            password = pair.second;
        }
    } else {
        user = options.user;
        if (user.isEmpty()) {
            user = url.userName();
        }
        password = options.password;
        if (password.isEmpty()) {
            password = url.password();
        }

        if (options.interactive) {
            if (user.isEmpty()) {
                std::cout << "Please enter user name: ";
                std::string s;
                std::getline(std::cin, s);
                user = QString::fromStdString(s);
            }
            if (password.isEmpty()) {
                password = queryPassword(user);
            }
        }
    }

    // ### ensure URL is free of credentials
    if (url.userName().isEmpty()) {
        url.setUserName(user);
    }
    if (url.password().isEmpty()) {
        url.setPassword(password);
    }

    Account account;

    // Find the folder and the original owncloud url
    QStringList splitted = url.path().split(account.davPath());
    url.setPath(splitted.value(0));
    url.setScheme(url.scheme().replace("owncloud", "http"));
    QString folder = splitted.value(1);

    SimpleSslErrorHandler *sslErrorHandler = new SimpleSslErrorHandler;

    HttpCredentials *cred = new HttpCredentialsText(user, password);

    account.setUrl(url);
    account.setCredentials(cred);
    account.setSslErrorHandler(sslErrorHandler);

    AccountManager::instance()->setAccount(&account);

restart_sync:

    CSYNC *_csync_ctx;
    if( csync_create( &_csync_ctx, options.source_dir.toUtf8(),
                      url.toEncoded().constData()) < 0 ) {
        qFatal("Unable to create csync-context!");
        return EXIT_FAILURE;
    }
    int rc = ne_sock_init();
    if (rc < 0) {
        qFatal("ne_sock_init failed!");
    }

    csync_set_log_level(options.silent ? 1 : 11);

    opts = &options;
    cred->syncContextPreInit(_csync_ctx);

    if( csync_init( _csync_ctx ) < 0 ) {
        qFatal("Could not initialize csync!");
        return EXIT_FAILURE;
    }

    csync_set_module_property(_csync_ctx, "csync_context", _csync_ctx);
    if( !options.proxy.isNull() ) {
        QString host;
        int port = 0;
        bool ok;

        // Set as default and let overwrite later
        csync_set_module_property(_csync_ctx, "proxy_type", (void*) "NoProxy");

        QStringList pList = options.proxy.split(':');
        if(pList.count() == 3) {
            // http: //192.168.178.23 : 8080
            //  0            1            2
            host = pList.at(1);
            if( host.startsWith("//") ) host.remove(0, 2);

            port = pList.at(2).toInt(&ok);

            if( !host.isNull() ) {
                csync_set_module_property(_csync_ctx, "proxy_type", (void*) "HttpProxy");
                csync_set_module_property(_csync_ctx, "proxy_host", host.toUtf8().data());
                if( ok && port ) {
                    csync_set_module_property(_csync_ctx, "proxy_port", (void*) &port);
                }
            }
        }
    } else {
        clientProxy.setupQtProxyFromConfig();
        QString url( options.target_url );
        if( url.startsWith("owncloud")) {
            url.remove(0, 8);
            url = QString("http%1").arg(url);
        }
        clientProxy.setCSyncProxy(QUrl(url), _csync_ctx);
    }

    if (!options.exclude.isEmpty()) {
        csync_add_exclude_list(_csync_ctx, options.exclude.toLocal8Bit());
    }

    cred->syncContextPreStart(_csync_ctx);

    Cmd cmd;
    SyncJournalDb db(options.source_dir);
    SyncEngine engine(_csync_ctx, options.source_dir, QUrl(options.target_url).path(), folder, &db);
    QObject::connect(&engine, SIGNAL(finished()), &app, SLOT(quit()));
    QObject::connect(&engine, SIGNAL(transmissionProgress(Progress::Info)), &cmd, SLOT(transmissionProgressSlot()));

    // Have to be done async, else, an error before exec() does not terminate the event loop.
    QMetaObject::invokeMethod(&engine, "startSync", Qt::QueuedConnection);

    app.exec();

    csync_destroy(_csync_ctx);

    ne_sock_exit();

    if (engine.isAnotherSyncNeeded()) {
        qDebug() << "Restarting Sync, because another sync is needed";
        goto restart_sync;
    }

    return 0;
}