/*!
* \brief GLWidget::mousePressEvent
* Pobiera pozycję kursora na ekranie. Jeśli dodatkowo jest włączony tryb PointMode, dodaje
* do okna dialogowa współrzędne wskazanego punktu.
* \param event
*/
void GLWidget::mousePressEvent(QMouseEvent *event)
{
point_ = event->pos();
if (addPointMode) {
QVector3D pos = getPos(point_.x(), point_.y());
d_->addPoint(pos.x(), pos.y());
addPointMode = false;
}
}
void OgreLightNode::setPosition(QVector3D p)
{
m_position.x = p.x();
m_position.y = p.y();
m_position.z = p.z();
//m_node->resetOrientation();
m_light->setPosition(m_position);// * (1 / m_zoom));
updateRotation();
}
void QSoundSourcePrivate::setPosition(const QVector3D& position)
{
if (!m_alSource)
return;
alSource3f(m_alSource, AL_POSITION, position.x(), position.y(), position.z());
#ifdef DEBUG_AUDIOENGINE
QAudioEnginePrivate::checkNoError("source set position");
#endif
}
PXCPoint3DF32 IRSHandlerBase::convertQtIRS(const QVector3D &qtVector)
{
PXCPoint3DF32 irsVector;
irsVector.x = qtVector.x();
irsVector.y = qtVector.y();
irsVector.z = qtVector.z();
return irsVector;
}
Ogre::String toString(const QVector3D &v)
{
Ogre::String s="<QVector3D ";
s+="x="+Ogre::StringConverter::toString((float)v.x())+", ";
s+="y="+Ogre::StringConverter::toString((float)v.y())+", ";
s+="z="+Ogre::StringConverter::toString((float)v.z());
s+=">";
return s;
}
void QSoundSourcePrivate::setVelocity(const QVector3D& velocity)
{
if (!m_alSource)
return;
alSource3f(m_alSource, AL_VELOCITY, velocity.x(), velocity.y(), velocity.z());
#ifdef DEBUG_AUDIOENGINE
QAudioEnginePrivate::checkNoError("source set velocity");
#endif
}
void QSoundSourcePrivate::setDirection(const QVector3D& direction)
{
if (!m_alSource)
return;
alSource3f(m_alSource, AL_DIRECTION, direction.x(), direction.y(), direction.z());
#ifdef DEBUG_AUDIOENGINE
QAudioEnginePrivate::checkNoError("source set direction");
#endif
}
void SS3DWidget::camMoveCenter(const QVector3D& tt)
{
QVector3D xv = QVector3D::crossProduct((m_cam_center - m_cam_eye), m_cam_up).normalized();
QVector3D yv = QVector3D::crossProduct(xv, (m_cam_center - m_cam_eye)).normalized();
QVector3D zv = (m_cam_center - m_cam_eye).normalized();
QVector3D trans = xv * tt.x() + yv * tt.y() + zv * tt.z();
m_cam_eye += trans;
m_cam_center += trans;
}
void SurfaceSet::paintROI(){
glColor3f(0,0,0);
glPointSize(15);
glBegin(GL_POINTS);
for (int i = 0; i < afnis.at(0)->nodes.length(); i++){
QVector3D p = afnis.at(cs)->nodes.at(i);
if (roi->contains(i)) glVertex3f(p.x(),p.y(),p.z());
}
glEnd();
}
/* render particle system */
void Quiddiards::renderPS(){
glDisable(GL_LIGHTING);
for (vector<Particle>::iterator it = ps->getParticles().begin(); it != ps->getParticles().end(); it++){
float alpha = 1 - it->age / it->life; //calculate alpha according to particle age
if (alpha <= 0){
continue;
}
QVector3D pos = it->getCenter();
QVector3D color = it->color;
glColor4f(color.x(), color.y(), color.z(), alpha);
//glColor3f(color.x(), color.y(), color.z());
glPushMatrix();
glTranslatef(pos.x(), pos.y(), pos.z());
gluSphere(quad, it->size, 6, 6);
glPopMatrix();
}
glColor3f(1.0f, 1.0f, 1.0f);
glEnable(GL_LIGHTING);
}
float Quality::distancePointToRay(const QVector3D& origin, const QVector3D& dir, const QVector3D& point)
{
QVector3D dirToPoint = QVector3D(point.x() - origin.x(), point.y() - origin.y(), point.z() - origin.z());
float scalarP = dir.x() * dirToPoint.x() + dir.y() * dirToPoint.y() + dir.z() * dirToPoint.z();
float norm = sqrt(dir.x() * dir.x() + dir.y() * dir.y() + dir.z() * dir.z()) *
sqrt(dirToPoint.x() * dirToPoint.x() + dirToPoint.y() * dirToPoint.y() + dirToPoint.z() * dirToPoint.z());
float angle = acos(scalarP / norm);
return sin(angle) * Quality::distancePointToPoint(origin, point);
}
bool REIXSSpectrometer::gratingInPosition() const
{
if(currentGrating_ < 0 || currentGrating_ >= gratingCount())
return false;
QVector3D xyz = calibration_.hexapodXYZ(currentGrating_);
QVector3D rst = calibration_.hexapodRST(currentGrating_);
QVector3D uvw = calibration_.hexapodUVW(currentGrating_);
return hexapod_->x()->withinTolerance(xyz.x()) &&
hexapod_->y()->withinTolerance(xyz.y()) &&
hexapod_->z()->withinTolerance(xyz.z()) &&
hexapod_->r()->withinTolerance(rst.x()) &&
hexapod_->s()->withinTolerance(rst.y()) &&
hexapod_->t()->withinTolerance(rst.z()) &&
hexapod_->u()->withinTolerance(uvw.x()) &&
hexapod_->v()->withinTolerance(uvw.y()) &&
hexapod_->w()->withinTolerance(uvw.z());
}
/* Build a unit quaternion representing the rotation
* from u to v. The input vectors need not be normalised. */
QQuaternion fromTwoVectors(QVector3D u, QVector3D v)
{
float norm_u_norm_v = sqrt(QVector3D::dotProduct(u, u) * QVector3D::dotProduct(v, v));
float real_part = norm_u_norm_v + QVector3D::dotProduct(u, v);
QVector3D w;
if (real_part < 1.e-6f * norm_u_norm_v)
{
/* If u and v are exactly opposite, rotate 180 degrees
* around an arbitrary orthogonal axis. Axis normalisation
* can happen later, when we normalise the quaternion. */
real_part = 0.0f;
w = fabs(u.x()) > fabs(u.z()) ? QVector3D(-u.y(), u.x(), 0.f)
: QVector3D(0.f, -u.z(), u.y());
} else {
/* Otherwise, build quaternion the standard way. */
w = QVector3D::crossProduct(u, v);
}
return QQuaternion(real_part, w).normalized();
}
void GLRasterTexture::add(const QVector3D &v, const QVector2D &tc)
{
GLfloat *p = m_data.data() + m_count;
*p++ = v.x();
*p++ = v.y();
*p++ = v.z();
*p++ = tc.x();
*p++ = tc.y();
m_count += DATA_DIMENSIONS;
}
/**
* Get polygon oriented bounding box
**/
void Polygon3D::getLoopOBB(Loop3D &pin, QVector3D &size, QMatrix4x4 &xformMat){
float alpha = 0.0f;
float deltaAlpha = 0.05*3.14159265359f;
float bestAlpha;
Loop3D rotLoop;
QMatrix4x4 rotMat;
QVector3D minPt, maxPt;
QVector3D origMidPt;
QVector3D boxSz;
QVector3D bestBoxSz;
float curArea;
float minArea = FLT_MAX;
rotLoop = pin;
Polygon3D::getLoopAABB(rotLoop, minPt, maxPt);
origMidPt = 0.5f*(minPt + maxPt);
//while(alpha < 0.5f*_PI){
int cSz = pin.size();
QVector3D difVec;
for(int i=0; i<pin.size(); ++i){
difVec = (pin.at((i+1)%cSz) - pin.at(i)).normalized();
alpha = atan2(difVec.x(), difVec.y());
rotMat.setToIdentity();
rotMat.rotate(57.2957795f*(alpha), 0.0f, 0.0f, 1.0f);//57.2957795 rad2degree
transformLoop(pin, rotLoop, rotMat);
boxSz = Polygon3D::getLoopAABB(rotLoop, minPt, maxPt);
curArea = boxSz.x() * boxSz.y();
if(curArea < minArea){
minArea = curArea;
bestAlpha = alpha;
bestBoxSz = boxSz;
}
//alpha += deltaAlpha;
}
xformMat.setToIdentity();
xformMat.rotate(57.2957795f*(bestAlpha), 0.0f, 0.0f, 1.0f);//57.2957795 rad2degree
xformMat.setRow(3, QVector4D(origMidPt.x(), origMidPt.y(), origMidPt.z(), 1.0f));
size = bestBoxSz;
}//
void ViewportViewPlan::initializeViewport(const QVector3D& min, const QVector3D& max, int width, int height)
{
float breadth = max.y() - min.y();
// calculate the midpoint of the bounding box
_midpoint = 0.5 * (min + max);
QVector3D panpoint(_midpoint);
panpoint.setX(panpoint.x() + _panX);
panpoint.setY(panpoint.y() + _panY);
float aspect_ratio = 1.0;
if (height != 0)
aspect_ratio = width / static_cast<float>(height);
float hi, margin;
_proj = QMatrix4x4();
// find view extents using aspect ratio
if (_midpoint.x() / aspect_ratio >= breadth) {
margin = _midpoint.x() * .01 * _margin;
hi = (_midpoint.x() / aspect_ratio + margin) / _zoom;
float x = (_midpoint.x() + margin) / _zoom;
_proj.ortho(-x, x, -hi, hi, 0.1f, 40.0f);
}
else {
margin = breadth * .01 * _margin;
hi = (breadth * aspect_ratio + margin) / _zoom;
float y = (breadth + margin) / _zoom;
_proj.ortho(-hi, hi, -y, y, 0.1f, 40.0f);
}
// find the camera location
_camera_location = QVector3D(panpoint.x(), panpoint.y(), max.z() + 20);
// view matrix
QMatrix4x4 view;
view.lookAt(_camera_location, QVector3D(panpoint.x(), panpoint.y(), 0), QVector3D(0,1,0));
_view = view;
finishSetup();
}
void ctMatrix4::Scale(QVector3D t_scl)
{
QMatrix4x4 tmp;
tmp.setToIdentity();
tmp(0, 0) = t_scl.x();
tmp(1, 1) = t_scl.y();
tmp(2, 2) = t_scl.z();
m_matrix *= tmp;
}
void MainView2D::setGridSize(QVector3D sz)
{
switch(m_monProps->pointOfView())
{
case MonitorProperties::TopView:
m_gridSize = QSize(sz.x(), sz.z());
break;
case MonitorProperties::LeftSideView:
case MonitorProperties::RightSideView:
m_gridSize = QSize(sz.z(), sz.y());
break;
//case MonitorProperties::Undefined:
//case MonitorProperties::FrontView:
default:
m_gridSize = QSize(sz.x(), sz.y());
break;
}
emit gridSizeChanged();
}
float PerlinGenerator::noise(QVector3D& point)
{
int ix = MathHelper::toInt(floor(point.x()));
float fx0 = point.x() - ix;
float fx1 = fx0 - 1.0f;
float wx = smooth(fx0);
int iy = MathHelper::toInt(floor(point.y()));
float fy0 = point.y() - iy;
float fy1 = fy0 - 1.0f;
float wy = smooth(fy0);
int iz = MathHelper::toInt(floor(point.z()));
float fz0 = point.z() - iz;
float fz1 = fz0 - 1.0f;
float wz = smooth(fz0);
float vx0 = lattice(ix, iy, iz, QVector3D(fx0, fy0, fz0));
float vx1 = lattice(ix + 1, iy, iz, QVector3D(fx1, fy0, fz0));
float vy0 = lerp(QVector3D(wx, vx0, vx1));
vx0 = lattice(ix, iy + 1, iz, QVector3D(fx0, fy1, fz0));
vx1 = lattice(ix + 1, iy + 1, iz, QVector3D(fx1, fy1, fz0));
float vy1 = lerp(QVector3D(wx, vx0, vx1));
float vz0 = lerp(QVector3D(wy, vy0, vy1));
vx0 = lattice(ix, iy, iz + 1, QVector3D(fx0, fy0, fz1));
vx1 = lattice(ix + 1, iy, iz + 1, QVector3D(fx1, fy0, fz1));
vy0 = lerp(QVector3D(wx, vx0, vx1));
vx0 = lattice(ix, iy + 1, iz + 1, QVector3D(fx0, fy1, fz1));
vx1 = lattice(ix + 1, iy + 1, iz + 1, QVector3D(fx1, fy1, fz1));
vy1 = lerp(QVector3D(wx, vx0, vx1));
float vz1 = lerp(QVector3D(wy, vy0, vy1));
return lerp(QVector3D(wz, vz0, vz1));
}
/*
multLookAt -- Create a matrix to make an object, such as
a camera, "look at" another object or location, from
a specified position.
Algorithm:
The desired transformation is obtained with this 4x4 matrix:
| [xaxis] 0 |
| [up] 0 |
| [-at] 0 |
| [eye] 1 |
Where 'xaxis', 'up' and 'at' are the new X, Y, and Z axes of
the transforned object, respectively, and 'eye' is the input
new location of the transformed object.
Assumptions:
The camera geometry is defined to be facing
the negative Z axis.
Usage:
multLookAt creates a matrix and multiplies it onto the
current matrix stack. Typical usage would be as follows:
glMatrixMode (GL_MODELVIEW);
// Define the usual view transformation here using
// gluLookAt or whatever.
glPushMatrix();
multLookAt (orig[0], orig[1], orig[2],
at[0], at[1], at[2],
up[0], up[1], up[2]);
// Define "camera" object geometry here
glPopMatrix();
Warning: Results become undefined as (at-eye) approaches
coincidence with (up).
*/
void multLookAt (float m[],
const QVector3D & ieye,
const QVector3D & iat,
const QVector3D & iup)
{
// Compute our new look at vector, which will be
// the new negative Z axis of our transformed object.
QVector3D atVec;
atVec = ieye-iat;
atVec.normalize();
QVector3D xVec = QVector3D::crossProduct(atVec, iup);
xVec.normalize();
// Calculate the new up vector, which will be the
// positive Y axis of our transformed object. Note
// that it will lie in the same plane as the new
// look at vector and the old up vector.
QVector3D upVec = QVector3D::crossProduct(xVec, atVec);
// Account for the fact that the geometry will be defined to
// point along the negative Z axis.
atVec *= -1.f;
// Fill out the rest of the 4x4 matrix
m[0] = xVec.x();
m[1] = xVec.y();
m[2] = xVec.z();
m[3] = 0.f; // xaxis is m[0..2]
m[4] = upVec.x();
m[5] = upVec.y();
m[6] = upVec.z();
m[7] = 0.f; // up is m[4..6]
m[8] = atVec.x();
m[9] = atVec.y();
m[10] = atVec.z();
m[11] = 0.f; // -at is m[8..10]
m[12] = ieye.x();
m[13] = ieye.y();
m[14] = ieye.z();
m[15] = 1.f;
}
void AxisRenderer::drawCamLine(QVector3D from, QVector3D to, QGLShaderProgram &program, const AxisCamera &camera)
{
const GLfloat color[] ={1.0f, 0.0f, 0.0f, 1.0f}; //default red color
//temp vector to hold line verticies
std::vector<GLfloat> bufferData;
//from verticies
bufferData.push_back(from.x());
bufferData.push_back(from.y());
bufferData.push_back(from.z());
bufferData.push_back(1.0f);
//to verticies
bufferData.push_back(to.x());
bufferData.push_back(to.y());
bufferData.push_back(to.z());
bufferData.push_back(1.0f);
program.bind();
//create and fill line buffer with verticies
QGLBuffer line(QGLBuffer::VertexBuffer);
line.create();
line.bind();
line.allocate(bufferData.data(), sizeof(GLfloat) * 8);
//get locations
GLuint colorLoc = program.uniformLocation("color");
Q_ASSERT(colorLoc != -1);
GLuint mvpLoc = program.uniformLocation("modelToCamera");
Q_ASSERT(mvpLoc != -1);
//setup line for drawing
line.bind();
program.enableAttributeArray("vertex");
program.setAttributeBuffer("vertex", GL_FLOAT, 0, 4);
program.setUniformValueArray(colorLoc, color, 1, 4);
program.setUniformValueArray(mvpLoc, &(camera.getProjMatrix()), 1);
glDrawArrays(GL_LINES, 0, 2);
}
void Box3D::includePoint(QVector3D p)
{
const float EPS = 0.00001;
if (_valid) {
_min = Point3(std::min(_min.x(), p.x() - EPS),
std::min(_min.y(), p.y() - EPS),
std::min(_min.z(), p.z() - EPS));
_max = Point3(std::max(_max.x(), p.x() + EPS),
std::max(_max.y(), p.y() + EPS),
std::max(_max.z(), p.z() + EPS));
} else {
_min = Point3(p.x() - EPS,
p.y() - EPS,
p.z() - EPS);
_max = Point3(p.x() + EPS,
p.y() + EPS,
p.z() + EPS);
_valid = true;
}
}
bool QQuickVector3DValueType::fuzzyEquals(const QVector3D &vec, qreal epsilon) const
{
qreal absEps = qAbs(epsilon);
if (qAbs(v.x() - vec.x()) > absEps)
return false;
if (qAbs(v.y() - vec.y()) > absEps)
return false;
if (qAbs(v.z() - vec.z()) > absEps)
return false;
return true;
}
static void _normalVectorToXYVectors( const QVector3D &pNormal, QVector3D &pXVector, QVector3D &pYVector )
{
// Here we define the two perpendicular vectors that define the local
// 2D space on the plane. They will act as axis for which we will
// calculate the projection coordinates of a 3D point to the plane.
if ( pNormal.z() > 0.001 || pNormal.z() < -0.001 )
{
pXVector = QVector3D( 1, 0, -pNormal.x() / pNormal.z() );
}
else if ( pNormal.y() > 0.001 || pNormal.y() < -0.001 )
{
pXVector = QVector3D( 1, -pNormal.x() / pNormal.y(), 0 );
}
else
{
pXVector = QVector3D( -pNormal.y() / pNormal.x(), 1, 0 );
}
pXVector.normalize();
pYVector = QVector3D::normal( pNormal, pXVector );
}
void Camera::shift(const QVector3D &shift)
{
qreal k = (m_cameraPos - m_targetCamera).length() * 0.01;
m_cameraPos += -k*shift.x()* m_right +
k*shift.y()* m_up;
if(!m_isFreeMode)
calcCameraAxis();
matrixByAxisCamera(m_cameraMatrix, m_cameraPos, m_right, m_up);
}
void Camera::lookAt(QVector3D lookPos)
{
// Reconstruct pitch/yaw from the look direction
const QVector3D lookDir= (lookPos - _position).normalized();
const float theta= acosf(lookDir.y());
const float phi= atan2f(lookDir.z(), lookDir.x());
setPitch(90.0f - (theta * 180.0f / M_PI));
setYaw (90.0f - (phi * 180.0f / M_PI));
}
Connection::Connection( QVector3D fn, QVector3D diff, float v ) :
fn( fn ),
diff( diff ),
v( v )
{
QVector3D diffn = diff.normalized();
r=qAbs(diffn.x());
g=qAbs(diffn.y());
b=qAbs(diffn.z());
}
void QtGLComponent::updateBoundingBox(const QVector3D& vert)
{
if (vert.x() < m_boundMinus.x())
m_boundMinus.setX(vert.x());
if (vert.y() < m_boundMinus.y())
m_boundMinus.setY(vert.y());
if (vert.z() < m_boundMinus.z())
m_boundMinus.setZ(vert.z());
if (vert.x() > m_boundPlus.x())
m_boundPlus.setX(vert.x());
if (vert.y() > m_boundPlus.y())
m_boundPlus.setY(vert.y());
if (vert.z() > m_boundPlus.z())
m_boundPlus.setZ(vert.z());
}
void ModelInterface::initialize(const aiScene* scene)
{
QVector<QVector3D> vertices;
QVector<QVector3D> _bones;
/// Vertices
for(int i = 0; i < scene->mNumMeshes; ++i)
{
for(int j = 0; j < scene->mMeshes[i]->mNumVertices; ++j)
vertices.append(QVector3D(scene->mMeshes[i]->mVertices[j].x, scene->mMeshes[i]->mVertices[j].y, scene->mMeshes[i]->mVertices[j].z));
}
// find min and max
QVector3D minVertex;
QVector3D maxVertex;
for(int i = 0; i < vertices.count(); ++i)
{
if(vertices[i].x() < minVertex.x()) // min X
minVertex.setX(vertices[i].x());
if(vertices[i].y() < minVertex.y()) // min Y
minVertex.setY(vertices[i].y());
if(vertices[i].z() < minVertex.z()) // min Z
minVertex.setZ(vertices[i].z());
if(vertices[i].x() > maxVertex.x()) // max X
maxVertex.setX(vertices[i].x());
if(vertices[i].y() > maxVertex.y()) // max Y
maxVertex.setY(vertices[i].y());
if(vertices[i].z() > maxVertex.z()) // max Z
maxVertex.setZ(vertices[i].z());
}
header.boundingBoxMin = minVertex;
header.boundingBoxMax = maxVertex;
header.center = (maxVertex + minVertex) / 2;
}
/*!
Creates a normalized quaternion that corresponds to rotating through
\a angle degrees about the specified 3D \a axis.
*/
QQuaternion QQuaternion::fromAxisAndAngle(const QVector3D& axis, qreal angle)
{
// Algorithm from:
// http://www.j3d.org/matrix_faq/matrfaq_latest.html#Q56
// We normalize the result just in case the values are close
// to zero, as suggested in the above FAQ.
qreal a = (angle / 2.0f) * M_PI / 180.0f;
qreal s = qSin(a);
qreal c = qCos(a);
QVector3D ax = axis.normalized();
return QQuaternion(c, ax.x() * s, ax.y() * s, ax.z() * s).normalized();
}