bool QgsGeometryEditUtils::deleteRing( QgsAbstractGeometryV2* geom, int ringNum, int partNum )
{
if ( !geom || partNum < 0 )
{
return false;
}
if ( ringNum < 1 ) //cannot remove exterior ring
{
return false;
}
QgsAbstractGeometryV2* g = geom;
QgsGeometryCollectionV2* c = dynamic_cast<QgsGeometryCollectionV2*>( geom );
if ( c )
{
g = c->geometryN( partNum );
}
else if ( partNum > 0 )
{
//part num specified, but not a multi part geometry type
return false;
}
QgsCurvePolygonV2* cpoly = dynamic_cast<QgsCurvePolygonV2*>( g );
if ( !cpoly )
{
return false;
}
return cpoly->removeInteriorRing( ringNum - 1 );
}
void QgsMapToolAddCircularString::updateCenterPointRubberBand( const QgsPointV2& pt )
{
if ( !mShowCenterPointRubberBand || !mCenterPointRubberBand || mPoints.size() < 2 )
{
return;
}
if (( mPoints.size() ) % 2 != 0 )
{
return;
}
//create circular string
QgsCircularStringV2* cs = new QgsCircularStringV2();
QgsPointSequenceV2 csPoints;
csPoints.append( mPoints.at( mPoints.size() - 2 ) );
csPoints.append( mPoints.at( mPoints.size() - 1 ) );
csPoints.append( pt );
cs->setPoints( csPoints );
QgsPointV2 center;
double radius;
QgsGeometryUtils::circleCenterRadius( csPoints.at( 0 ), csPoints.at( 1 ), csPoints.at( 2 ), radius, center.rx(), center.ry() );
QgsLineStringV2* segment1 = new QgsLineStringV2();
segment1->addVertex( center );
segment1->addVertex( csPoints.at( 0 ) );
QgsLineStringV2* segment2 = new QgsLineStringV2();
segment2->addVertex( csPoints.at( 2 ) );
segment2->addVertex( center );
QgsCompoundCurveV2* cc = new QgsCompoundCurveV2();
cc->addCurve( segment1 );
cc->addCurve( cs );
cc->addCurve( segment2 );
QgsCurvePolygonV2* cp = new QgsCurvePolygonV2();
cp->setExteriorRing( cc );
mCenterPointRubberBand->setGeometry( cp );
mCenterPointRubberBand->show();
}
int QgsGeometryEditUtils::addPart( QgsAbstractGeometryV2* geom, QgsAbstractGeometryV2* part )
{
if ( !geom )
{
return 1;
}
if ( !part )
{
return 2;
}
//multitype?
QgsGeometryCollectionV2* geomCollection = dynamic_cast<QgsGeometryCollectionV2*>( geom );
if ( !geomCollection )
{
return 1;
}
bool added = false;
if ( QgsWKBTypes::flatType( geom->wkbType() ) == QgsWKBTypes::MultiSurface
|| QgsWKBTypes::flatType( geom->wkbType() ) == QgsWKBTypes::MultiPolygon )
{
QgsCurveV2* curve = dynamic_cast<QgsCurveV2*>( part );
if ( curve && curve->isClosed() && curve->numPoints() >= 4 )
{
QgsCurvePolygonV2 *poly = nullptr;
if ( QgsWKBTypes::flatType( curve->wkbType() ) == QgsWKBTypes::LineString )
{
poly = new QgsPolygonV2();
}
else
{
poly = new QgsCurvePolygonV2();
}
poly->setExteriorRing( curve );
added = geomCollection->addGeometry( poly );
}
else if ( QgsWKBTypes::flatType( part->wkbType() ) == QgsWKBTypes::Polygon )
{
added = geomCollection->addGeometry( part );
}
else if ( QgsWKBTypes::flatType( part->wkbType() ) == QgsWKBTypes::MultiPolygon )
{
QgsGeometryCollectionV2 *parts = static_cast<QgsGeometryCollectionV2*>( part );
int i;
int n = geomCollection->numGeometries();
for ( i = 0; i < parts->numGeometries() && geomCollection->addGeometry( parts->geometryN( i )->clone() ); i++ )
;
added = i == parts->numGeometries();
if ( !added )
{
while ( geomCollection->numGeometries() > n )
geomCollection->removeGeometry( n );
delete part;
return 2;
}
delete part;
}
else
{
delete part;
return 2;
}
}
else
{
added = geomCollection->addGeometry( part );
}
return added ? 0 : 2;
}
void QgsMapToolAddFeature::cadCanvasReleaseEvent( QgsMapMouseEvent* e )
{
QgsVectorLayer* vlayer = currentVectorLayer();
if ( !vlayer )
{
notifyNotVectorLayer();
return;
}
QGis::WkbType layerWKBType = vlayer->wkbType();
QgsVectorDataProvider* provider = vlayer->dataProvider();
if ( !( provider->capabilities() & QgsVectorDataProvider::AddFeatures ) )
{
emit messageEmitted( tr( "The data provider for this layer does not support the addition of features." ), QgsMessageBar::WARNING );
return;
}
if ( !vlayer->isEditable() )
{
notifyNotEditableLayer();
return;
}
// POINT CAPTURING
if ( mode() == CapturePoint )
{
if ( e->button() != Qt::LeftButton )
return;
//check we only use this tool for point/multipoint layers
if ( vlayer->geometryType() != QGis::Point && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture point' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
QgsPoint savePoint; //point in layer coordinates
try
{
savePoint = toLayerCoordinates( vlayer, e->mapPoint() );
QgsDebugMsg( "savePoint = " + savePoint.toString() );
}
catch ( QgsCsException &cse )
{
Q_UNUSED( cse );
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
//only do the rest for provider with feature addition support
//note that for the grass provider, this will return false since
//grass provider has its own mechanism of feature addition
if ( provider->capabilities() & QgsVectorDataProvider::AddFeatures )
{
QgsFeature f( vlayer->fields(), 0 );
QgsGeometry *g = 0;
if ( layerWKBType == QGis::WKBPoint || layerWKBType == QGis::WKBPoint25D )
{
g = QgsGeometry::fromPoint( savePoint );
}
else if ( layerWKBType == QGis::WKBMultiPoint || layerWKBType == QGis::WKBMultiPoint25D )
{
g = QgsGeometry::fromMultiPoint( QgsMultiPoint() << savePoint );
}
else
{
// if layer supports more types (mCheckGeometryType is false)
g = QgsGeometry::fromPoint( savePoint );
}
f.setGeometry( g );
f.setValid( true );
addFeature( vlayer, &f, false );
mCanvas->refresh();
}
}
// LINE AND POLYGON CAPTURING
else if ( mode() == CaptureLine || mode() == CapturePolygon )
{
//check we only use the line tool for line/multiline layers
if ( mode() == CaptureLine && vlayer->geometryType() != QGis::Line && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture line' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//check we only use the polygon tool for polygon/multipolygon layers
if ( mode() == CapturePolygon && vlayer->geometryType() != QGis::Polygon && mCheckGeometryType )
{
emit messageEmitted( tr( "Wrong editing tool, cannot apply the 'capture polygon' tool on this vector layer" ), QgsMessageBar::WARNING );
return;
}
//add point to list and to rubber band
if ( e->button() == Qt::LeftButton )
{
int error = addVertex( e->mapPoint() );
if ( error == 1 )
{
//current layer is not a vector layer
return;
}
else if ( error == 2 )
{
//problem with coordinate transformation
emit messageEmitted( tr( "Cannot transform the point to the layers coordinate system" ), QgsMessageBar::WARNING );
return;
}
startCapturing();
}
else if ( e->button() == Qt::RightButton )
{
// End of string
deleteTempRubberBand();
//lines: bail out if there are not at least two vertices
if ( mode() == CaptureLine && size() < 2 )
{
stopCapturing();
return;
}
//polygons: bail out if there are not at least two vertices
if ( mode() == CapturePolygon && size() < 3 )
{
stopCapturing();
return;
}
if ( mode() == CapturePolygon )
{
closePolygon();
}
//create QgsFeature with wkb representation
QScopedPointer< QgsFeature > f( new QgsFeature( vlayer->fields(), 0 ) );
//does compoundcurve contain circular strings?
//does provider support circular strings?
bool hasCurvedSegments = captureCurve()->hasCurvedSegments();
bool providerSupportsCurvedSegments = vlayer->dataProvider()->capabilities() & QgsVectorDataProvider::CircularGeometries;
QgsCurveV2* curveToAdd = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
curveToAdd = captureCurve()->clone();
}
else
{
curveToAdd = captureCurve()->curveToLine();
}
if ( mode() == CaptureLine )
{
f->setGeometry( new QgsGeometry( curveToAdd ) );
}
else
{
QgsCurvePolygonV2* poly = 0;
if ( hasCurvedSegments && providerSupportsCurvedSegments )
{
poly = new QgsCurvePolygonV2();
}
else
{
poly = new QgsPolygonV2();
}
poly->setExteriorRing( curveToAdd );
f->setGeometry( new QgsGeometry( poly ) );
int avoidIntersectionsReturn = f->geometry()->avoidIntersections();
if ( avoidIntersectionsReturn == 1 )
{
//not a polygon type. Impossible to get there
}
#if 0
else if ( avoidIntersectionsReturn == 2 ) //MH120131: disable this error message until there is a better way to cope with the single type / multi type problem
{
//bail out...
emit messageEmitted( tr( "The feature could not be added because removing the polygon intersections would change the geometry type" ), QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
#endif
else if ( avoidIntersectionsReturn == 3 )
{
emit messageEmitted( tr( "An error was reported during intersection removal" ), QgsMessageBar::CRITICAL );
}
if ( !f->constGeometry()->asWkb() ) //avoid intersection might have removed the whole geometry
{
QString reason;
if ( avoidIntersectionsReturn != 2 )
{
reason = tr( "The feature cannot be added because it's geometry is empty" );
}
else
{
reason = tr( "The feature cannot be added because it's geometry collapsed due to intersection avoidance" );
}
emit messageEmitted( reason, QgsMessageBar::CRITICAL );
stopCapturing();
return;
}
}
if ( addFeature( vlayer, f.data(), false ) )
{
//add points to other features to keep topology up-to-date
int topologicalEditing = QgsProject::instance()->readNumEntry( "Digitizing", "/TopologicalEditing", 0 );
//use always topological editing for avoidIntersection.
//Otherwise, no way to guarantee the geometries don't have a small gap in between.
QStringList intersectionLayers = QgsProject::instance()->readListEntry( "Digitizing", "/AvoidIntersectionsList" );
bool avoidIntersection = !intersectionLayers.isEmpty();
if ( avoidIntersection ) //try to add topological points also to background layers
{
QStringList::const_iterator lIt = intersectionLayers.constBegin();
for ( ; lIt != intersectionLayers.constEnd(); ++lIt )
{
QgsMapLayer* ml = QgsMapLayerRegistry::instance()->mapLayer( *lIt );
QgsVectorLayer* vl = qobject_cast<QgsVectorLayer*>( ml );
//can only add topological points if background layer is editable...
if ( vl && vl->geometryType() == QGis::Polygon && vl->isEditable() )
{
vl->addTopologicalPoints( f->constGeometry() );
}
}
}
else if ( topologicalEditing )
{
vlayer->addTopologicalPoints( f->constGeometry() );
}
}
stopCapturing();
}
}
}
