Exemplo n.º 1
0
/**  Write a file asynchronously in blocks of aBlockSize size

	@param fs			RFs object
	@param aFileWrite	RFile object, needs to exist beyond the scope of this function
	@param aFile		File name
	@param aSize		Size of the file in bytes
	@param aBlockSize	Size of the blocks to be used in bytes
	@param aStatus		TRequestStatus array for all the requests
*/
void WriteFileAsync(RFs& fs, RFile& aFileWrite, TDes16& aFile, TInt aSize, TInt aBlockSize, TRequestStatus aStatus[]) 
	{
		
	TInt r = 0;
	
	TEST(aBlockSize > 0);				// Block size must be greater than 0

	r = aFileWrite.Replace(fs,aFile,EFileShareAny|EFileWrite|EFileWriteDirectIO);
	TESTERROR(r);

	TInt j = 0;
	TInt i = 0;
	while(j < aSize)
		{
		if((aSize - j) >= aBlockSize) 	// All the blocks but the last one
			aFileWrite.Write(gBufWritePtr, aBlockSize, aStatus[i]); 
		else							// The last block
			aFileWrite.Write(gBufWritePtr, (aSize - j), aStatus[i]); 

		TInt status = aStatus[i].Int();
		if (status != KErrNone && status != KRequestPending)
			{
			test.Printf(_L("RFile::Write() returned %d\n"), aStatus[i].Int());
			}

		test (status == KErrNone || status == KRequestPending);
		i++;
		j += aBlockSize;	
		}					
	}
Exemplo n.º 2
0
void CTLogger::LogL(const TDesC& aString)
	{
	// Open the file server and file
	RFs fs;
	User::LeaveIfError(fs.Connect());
	CleanupClosePushL(fs);
	
	// Open the file or create it if doesn't exist, create it
	RFile file;
	TDriveUnit sysDrive (fs.GetSystemDrive());
	TBuf<128> logFile (sysDrive.Name());
	logFile.Append(KLogFilename);
	
	TInt error = file.Open(fs, logFile, EFileWrite|EFileShareAny);
	if (error == KErrNotFound)
		{
		error = file.Create(fs, logFile, EFileWrite|EFileShareAny);
		}
	User::LeaveIfError(error);
	CleanupClosePushL(file);
	
	// Seek to the end of the file
	TInt tmp = 0;
	file.Seek(ESeekEnd, tmp);

	// And do some logging
	TBuf8<MAX_LEN> buf;
	buf.Copy(aString);
	file.Write(buf);
	file.Write(KNewLine);

	// Close and tidy up
	CleanupStack::PopAndDestroy(2, &fs);
	}
void CTmsTestStep::DebugLogL(const TDesC8& aTestCaseID, const TDesC8& aResult, TInt aPos = -1)
{
    TInt pos = 0;
    RFs fs;
    fs.Connect();
    CleanupClosePushL(fs);

    if (BaflUtils::FolderExists(fs, KLogLocation))
    {
        RFile file;
        if (!BaflUtils::FileExists( fs, KLogLocation ))
        {
            User::LeaveIfError( file.Create( fs, KLogLocation, EFileWrite|EFileShareAny));
        }
        else
        {
            TInt err = file.Open( fs, KLogLocation, EFileWrite|EFileShareAny);
            if(err == KErrInUse)
            {
                CleanupStack::PopAndDestroy();
                return;
            }
            if (aPos == -1)
                file.Seek(ESeekEnd, pos);
            else
                file.Seek(ESeekCurrent, aPos);
        }
        file.Write(aTestCaseID);
        file.Write(aResult);
        file.Write(_L8("\r\n "));
        file.Flush();
        file.Close();
    }
    CleanupStack::PopAndDestroy();
}
Exemplo n.º 4
0
// Very simple logging code. This will thrash the file server by
// creating a new session to it for every line. Create the file
// c:\logs\ct.txt to turn on logging.
EXPORT_C void SLogger::Log(const TDesC& aLogFileName, const TDesC& aString,
                           const TDesC8& aSourceFileName, TInt aLineNumber)
{
    // Open the file server and file
    RFs fs;
    fs.Connect();
    RFile file;
    TInt error = file.Open(fs, aLogFileName, EFileWrite|EFileShareAny);
    // If the file doesn't exist, exit
    if (error != KErrNone)
    {
        fs.Close();
        return;
    }
    // Seek to the end of the file
    TInt tmp = 0;
    file.Seek(ESeekEnd, tmp);

    // And do some logging
    // Name of the file where the Log function was called
    file.Write(aSourceFileName);
    // Number of the line where the Log function was called
    _LIT8(KLineNumber, ",%d:");
    TBuf8<80> buf;
    buf.Format(KLineNumber, aLineNumber);
    file.Write(buf);
    buf.Copy(aString);
    file.Write(buf);
    _LIT8(KEnd, "\r\n");
    file.Write(KEnd());

    // Close and tidy up
    file.Close();
    fs.Close();
}
void CRefTestAgentImportFile::DumpMetaData(const CMetaDataArray& aMetaDataArray)
	{
	_LIT(KMetaDataLogFile, "c:\\logs\\rta\\metadata");
	_LIT(KExt, ".log");
	
	TInt id(0);
	TInt err(KErrNone);
	TFileName filename;
	RFile file;
	do	{
		filename.SetLength(0);
		filename.Append(KMetaDataLogFile);
		filename.AppendNum(++id);
		filename.Append(KExt);
		err = file.Create(iFs,filename,EFileWrite);
		} while(err == KErrAlreadyExists);

	if(err == KErrNone)
		{
		for(TInt i=0;i<aMetaDataArray.Count();i++)
			{
			file.Write(aMetaDataArray[i].Field8());
			file.Write(_L8(" "));
			file.Write(aMetaDataArray[i].Data8());
			file.Write(_L8("\r\n"));
			}
		file.Close();
		}
	}
void TestMessageCreateAttachmentL(const TDesC8& aMimeType, TUint aCharset)
	{
	RFile createdAttachment;

	CleanMailFolder(KMsvDraftEntryId);

	// Create a message.
	RSendAsMessage message;
	theUtils->WriteComment(_L("Create a message."));
	message.CreateL(gSendAs, sendAsTestMtmUid);
	theUtils->WriteComment(_L("Create first attachment file."));
	message.CreateAttachmentL(KCreatedAttachmentName1, createdAttachment, aMimeType, aCharset);

	// RFile should now be open on the new attachment.
	test(createdAttachment.Write(KAttachmentContent) == KErrNone);
	createdAttachment.Close();

	theUtils->WriteComment(_L("Create second attachment file."));
	message.CreateAttachmentL(KCreatedAttachmentName2, createdAttachment, aMimeType, aCharset);

	// RFile should now be open on the new attachment.
	test(createdAttachment.Write(KAttachmentContent) == KErrNone);
	createdAttachment.Close();

	message.SaveMessageAndCloseL();

	CheckNewAttachmentL(KCreatedAttachmentName1, 0, aMimeType, aCharset, EFalse);
	CheckNewAttachmentL(KCreatedAttachmentName2, 0, aMimeType, aCharset, EFalse);
	
	theUtils->Complete();
	}
Exemplo n.º 7
0
void CWmDrmDataStore::WriteInitialFreeSpaceL( const TDesC& aFileName,
    TBool& aConfiguredDrive )
    {
    RFile file;
    TBuf8<KMaxTInt64BufLength + 2 * KAESKeyLength> encryptedData;
    TBuf8<KMaxTInt64BufLength + 2 * KAESKeyLength> decryptedData;
    TBuf8<KAESKeyLength> key;
    TBuf8<KAESKeyLength> iv;
    CBufferedEncryptor* encryptor = NULL;
    CModeCBCEncryptor* cbcEncryptor = NULL;
    CAESEncryptor* aesEncryptor = NULL;
    CPaddingPKCS7* padding = NULL;

    LOGFN( "CWmDrmDataStore::WriteInitialFreeSpaceL" );
    User::LeaveIfError( file.Create( iServer->Fs(), aFileName, EFileWrite ) );
    CleanupClosePushL( file );
    if ( aConfiguredDrive )
        {
        iInitialFreeSpace2 = iServer->FreeSpaceL( aConfiguredDrive );
        }
    else
        {
        iInitialFreeSpace = iServer->FreeSpaceL( aConfiguredDrive );
        }
    iv.SetLength( KAESKeyLength );
    TRandom::RandomL( iv );
#if defined(FF_PLATFORM_SIMULATOR) || defined(__WINSCW__)
    key.Copy( KDummyKey );
#else
    iServer->Cache()->iKeyStorage->GetDeviceSpecificKeyL( key );
#endif
    aesEncryptor = CAESEncryptor::NewL( key );
    CleanupStack::PushL( aesEncryptor );

    cbcEncryptor = CModeCBCEncryptor::NewL( aesEncryptor, iv );
    CleanupStack::Pop( aesEncryptor );
    CleanupStack::PushL( cbcEncryptor );

    padding = CPaddingPKCS7::NewL( KAESKeyLength );
    CleanupStack::PushL( padding );

    encryptor = CBufferedEncryptor::NewL( cbcEncryptor, padding );
    CleanupStack::Pop( 2, cbcEncryptor ); //padding, cbcEncryptor
    CleanupStack::PushL( encryptor );

    if ( aConfiguredDrive )
        {
        decryptedData.AppendNum( iInitialFreeSpace2 );
        }
    else
        {
        decryptedData.AppendNum( iInitialFreeSpace );
        }

    encryptor->ProcessFinalL( decryptedData, encryptedData );
    User::LeaveIfError( file.Write( iv ) );
    User::LeaveIfError( file.Write( encryptedData ) );
    CleanupStack::PopAndDestroy( 2, &file ); //encryptor, file
    }
void CRightsCriteriaCount::WriteDescription(RFile& aFile)
	{
	TBuf8 <10> count;
	count.Num(iCount);
	aFile.Write(_L8("Count = "));
	aFile.Write(count);
	aFile.Write(_L8("\r\n"));
	}
// ---------------------------------------------------------------------------------
// CUpnpTmServerDeviceXmlParser::OnStartDocumentL
// Called when parser hits the start of the document
// ---------------------------------------------------------------------------------
//
void CUpnpTmServerDeviceXmlParser::OnStartDocumentL(const RDocumentParameters& /*aDocParam*/,
                                                                             TInt aErrorCode )
	{
	OstTraceFunctionEntry0( CUPNPTMSERVERDEVICEXMLPARSER_ONSTARTDOCUMENTL_ENTRY );
	User::LeaveIfError(aErrorCode);
    
    TBuf<KMaxBufLength> tmpBuf(iDeviceDir);
    tmpBuf.Append(KDeviceName());
    iDescFilePath.CreateL(tmpBuf);
    tmpBuf.Zero();
    
    // Create TmAppServer service xml
    tmpBuf.Copy(iDeviceDir);
    tmpBuf.Append(KAppServerSrvName());
    RFile appServerSrvFile;
    CleanupClosePushL(appServerSrvFile);
    TInt err(KErrNone);
    err = appServerSrvFile.Create(iFs, tmpBuf, EFileWrite);
    if ( err == KErrAlreadyExists )
        {
        User::LeaveIfError(appServerSrvFile.Open(iFs, tmpBuf, EFileWrite));
        }
    else
        {
        User::LeaveIfError(err);
        }
    User::LeaveIfError(appServerSrvFile.Write(iAppServerSrvDescription));
    CleanupStack::PopAndDestroy( &appServerSrvFile );
    iAppServerSrvFilePath.CreateL(tmpBuf);
    tmpBuf.Zero();
    
    // Create TmClientProfile service xml
    tmpBuf.Copy(iDeviceDir);
    tmpBuf.Append(KClientProfSrvName());
    RFile clientProfSrvFile;
    CleanupClosePushL(clientProfSrvFile);
    err = clientProfSrvFile.Create(iFs, tmpBuf, EFileWrite);
    if ( err == KErrAlreadyExists )
        {
        User::LeaveIfError(clientProfSrvFile.Open(iFs, tmpBuf, EFileWrite));
        }
    else
        {
        User::LeaveIfError(err);
        }
    User::LeaveIfError(clientProfSrvFile.Write(iClientProfSrvDescription));
    CleanupStack::PopAndDestroy( &clientProfSrvFile );
    iClientProfSrvFilePath.CreateL(tmpBuf);
    
    iDeviceDescription.Append(KStartLine());
    iDescriptionUri.CreateMaxL(UpnpString::KDefaultStringLength);
    iDescriptionUri.SetLength(KErrNone);
    iDescriptionUri.Append(KScpdUrl());
    iDescriptionUri.Append(KDeviceName());
	OstTraceFunctionExit0( CUPNPTMSERVERDEVICEXMLPARSER_ONSTARTDOCUMENTL_EXIT );
	}
Exemplo n.º 10
0
void CVirtualFile::WriteDescriptor8L(RFile& aFile, const TDesC8& aBuffer)
{
    // Write the length of the descriptor
    TInt length = aBuffer.Length();
    TPckg<TInt> lengthPckg(length);
    User::LeaveIfError(aFile.Write(lengthPckg,lengthPckg.Length()));

    // write the data
    User::LeaveIfError(aFile.Write(aBuffer, length));
}
Exemplo n.º 11
0
void LogFilePrint(TRefByValue<const TDesC> aFormat, ...) {
    
    // Connect to file server. This wastes time and resources, but ensures
    // that the debug macros don't depend on anything else being initialized.
    RFs fs;
    PanicIfError(fs.Connect());

    // Open file. Append to the end of the file if it exists, or create new
    // if it doesn't.
    RFile file;
    TInt err = file.Open(fs, KLogFileName, EFileWrite | EFileShareExclusive);
    if ( err == KErrNone ) {
        TInt pos = 0;
        PanicIfError(file.Seek(ESeekEnd, pos));
    } else if ( err == KErrNotFound ) {
        PanicIfError(file.Create(fs, KLogFileName,
                                 EFileWrite | EFileShareExclusive));
    } else {
        User::Panic(KPanic, err);
    }

    // Ugly: Buffer for the message. We don't know how much space is really
    // needed
    HBufC *buf = HBufC::New(KFormatBufferSize);
    if ( !buf ) {
        User::Panic(KPanic, 1);
    }
    TPtr ptr = buf->Des();

    // Create a timestamp and write it first on the line    
    TTime time;
    time.HomeTime();
    TRAP(err, time.FormatL(ptr, KTimestampFormat));
    PanicIfError(err);
    TPtrC8 ptr8((TUint8*)ptr.Ptr(), ptr.Size());
    PanicIfError(file.Write(ptr8));

    // Format the message, and write it
    VA_LIST args;
    VA_START(args, aFormat);
    ptr.FormatList(aFormat, args);
    VA_END(args);
    ptr8.Set((TUint8*)ptr.Ptr(), ptr.Size());
    PanicIfError(file.Write(ptr8));

    // End with a linefeed
    ptr = KCRLF;
    ptr8.Set((TUint8*)ptr.Ptr(), ptr.Size());
    PanicIfError(file.Write(ptr8));

    delete buf;
    file.Close();
    fs.Close();    
}
Exemplo n.º 12
0
void Parser::WriteSymbianHeaderL(RFile& aFile, TInt32& aUid1, TInt32& aUid2, TInt32& aUid3, TUint32& aUidCrc)
	{
	TPckg<TInt32> uid1Pckg(aUid1);
	User::LeaveIfError(aFile.Write(uid1Pckg));
	TPckg<TInt32> uid2Pckg(aUid2);
	User::LeaveIfError(aFile.Write(uid2Pckg));
	TPckg<TInt32> uid3Pckg(aUid3);
	User::LeaveIfError(aFile.Write(uid3Pckg));
	TPckg<TUint32> uidCrcPckg(aUidCrc);
	User::LeaveIfError(aFile.Write(uidCrcPckg));
	}
Exemplo n.º 13
0
/**
Processes a message which describes the detection of an
infected file.  Appends the relevant text at the end of the
file to say that it has been "cleaned".  This allows the virus
test program to confirm that the test virus scanner is 
behaving as expected.

@internalComponent
@param aMessage The message to be processed.
*/
void CTestVirusHook::CleanFile(const TDesC& aName, TInt aOperation)
	{
	
	RFile infectedFile;
	TBool bChangedToRw=EFalse;
	TInt pos=0;

	TUint fileAtt;
	TInt r = iFs.Att(aName, fileAtt);
	if (r != KErrNone)
		{
		return;
		}

	if (fileAtt & KEntryAttReadOnly)
		{
		bChangedToRw = ETrue;
		r = iFs.SetAtt(aName, 0, KEntryAttReadOnly);
		}

	r = infectedFile.Open(iFs, aName, EFileShareAny | EFileWrite);

	if (r != KErrNone)
		{
		return;
		}

	//To show we've fixed the file, append "Infection deleted" to the end of it.
	infectedFile.Seek(ESeekEnd, pos);
	switch (aOperation)
		{
	case EFileOpen:
		infectedFile.Write(_L8("infection detected - file open\\n"));
		break;
	case EFileDelete:
		infectedFile.Write(_L8("infection detected - file delete\\n"));
		break;
	case EFileRename:
		infectedFile.Write(_L8("infection detected - file rename\\n"));
		break;
	case EFileClose:
		infectedFile.Write(_L8("infection detected - file close\\n"));
		break;
		}

	infectedFile.Close();

	if (bChangedToRw)
		{
		iFs.SetAtt(aName, KEntryAttReadOnly,0);
		}
	}
Exemplo n.º 14
0
void CPolicyTest::WriteScriptFileL(const TDesC& aPath, const TDesC8& aAction)
	{	
	iFs.Delete(aPath); // ignore errors
	
	RFile file;
	User::LeaveIfError(file.Create(iFs, aPath, EFileShareExclusive | EFileWrite));
	CleanupClosePushL(file);
	
	User::LeaveIfError(file.Write(*iPreActions));
	User::LeaveIfError(file.Write(aAction));	
	User::LeaveIfError(file.Write(*iPostActions));
	
	CleanupStack::PopAndDestroy(&file);
	}
Exemplo n.º 15
0
void CHttpTypes::SaveHttpTypesFileL(const TDesC& aFileName) const
{
	RFs fs;
	RFile cfg;
	TBuf8<256> buffer;
	TInt len;

	User::LeaveIfError(fs.Connect());
	User::LeaveIfError(cfg.Replace(fs,aFileName,EFileStreamText|EFileWrite));

	len = iHttpTypesArray->Count();

	for (TInt index = 0; index < len; index++)
	{
		// *NOTE* With wide build, Copy will do 16 -> 8 truncation
		// which should not cause problems, as type strings must be
		// plain ASCII anyway -- msa
		buffer.Copy((*iHttpTypesArray)[index]);
		buffer.Append('\n');
		cfg.Write(buffer);
	}

	cfg.Close();
	fs.Close();
		
}
Exemplo n.º 16
0
void createVcardFileL(const TDesC8& aOrgLine, RFs& aFileSession)
{
    RFile file;
    User::LeaveIfError(file.Replace(aFileSession, KVImportFileName, EFileWrite|EFileShareAny));
    CleanupClosePushL(file);
    
    file.Write(KBegin);
    file.Write(KVersion);
    file.Write(KName);
    file.Write(aOrgLine);
    file.Write(KEnd);
    
    file.Flush();
    CleanupStack::PopAndDestroy(); //file.Close()
    
}
TInt LoadLogicalDriverL(RFs &fileSystem, const TDesC16 &lddName, i_status_notif* cb)
{
	TInt  ret;
	TUint val = 0x51000000U;
	TPtr8 bufPtr((unsigned char *)&val, 4, 4);
	TInt flag = 0;
	TInt cnt = 0;
	
	RFile ldd;
	
	do
	{ ret = User::LoadLogicalDevice(lddName);
	if(ret == KErrNotSupported)
	{ cb->error(_L("KErrNotSupported"));
	ldd.Open(fileSystem, lddName, EFileWrite);
	ldd.Write(0x48, bufPtr);
	cnt++;
	val += 0x40000;
	ldd.Close();
	} else  if(ret == KErrNone || ret == KErrAlreadyExists) flag = 1; else
		User::Leave(ret);
	} while(!flag && val != 0x51000000U);
	
	if(ret == KErrAlreadyExists) cb->error(_L("KErrAlreadyExists"));
	return cnt;
}
Exemplo n.º 18
0
/**
@SYMTestCaseID          SYSLIB-DBMS-CT-0612
@SYMTestCaseDesc        Database validity test
@SYMTestPriority        Medium
@SYMTestActions         Tests for opening and closing of database
@SYMTestExpectedResults Test must not fail
@SYMREQ                 REQ0000
*/
LOCAL_C void TestOpenL()
	{
	_LIT(KFileNotFound,"not a database");
	TInt r=TheDatabase.Open(TheFs,KFileNotFound);
	test (r==KErrNotFound || r==KErrPathNotFound);
//
	_LIT(KPathNotFound,"C:\\not a path\\database.db");
	r=TheDatabase.Open(TheFs,KPathNotFound);
	test (r==KErrPathNotFound);
//
	_LIT(KNotFormat,"not.a.dbx");
	r=TheDatabase.Open(TheFs,KFileNotFound,KNotFormat);
	test (r==KErrNotFound || r==KErrPathNotFound);
//
	DbCreateL();
	TheDatabase.Close();
	r=TheDatabase.Open(TheFs,KTestDatabase,TUid::Uid(0x01234567).Name());
	test (r==KErrNone); // New code has no loadable drivers, it is irrelevant to expect error here
	TheDatabase.Close(); // We have added it here because previous statement does not return error anymore
//
	RFile f;
	r=f.Replace(TheFs,KTestDatabase,EFileWrite);
	test (r==KErrNone);
	TCheckedUid type(KDirectFileStoreLayoutUid);
	r=f.Write(type.Des());
	test (r==KErrNone);
	f.Close();
	r=TheDatabase.Open(TheFs,KTestDatabase);
	test (r==KErrNotSupported);
//
	_LIT(KDefaultFormat,"epoc");
	r=TheDatabase.Open(TheFs,KTestDatabase,KDefaultFormat);
	test (r==KErrNotSupported); // We expect not supported db here
	}
Exemplo n.º 19
0
LOCAL_C void Test1()
	{
// Basic clamp operation
	test.Next(_L("T_DENYCLAMP - Test1()"));

	TBuf<256> fileName;	
	TBuf<256> buf(_L("buffer for file used"));

	fileName = _L("clampFile.tst");
	RFile testFile;
	TInt r=testFile.Replace(TheFs,fileName,EFileWrite);
	test(r==KErrNone);
	TPtrC8 pBuf((TUint8*)&buf);
	testFile.Write(pBuf);
	testFile.Flush();

	// Attempt to clamp file should be rejected
	RFileClamp handle;
	r=handle.Clamp(testFile);
	test(r==KErrPermissionDenied);

	// Attempt to unclamp a file should be rejected
	// Using an invalid-content cookie is OK - the request should
	// be rejected before the content is examined
	handle.iCookie[0]=MAKE_TINT64(-1,-1);
	handle.iCookie[1]=0;
	r=handle.Close(TheFs);
	test (r==KErrPermissionDenied);

	// Tidy up
	testFile.Close();
	r=TheFs.Delete(_L("clampFile.tst"));
	test (r==KErrNone);
	}
// Actual implementation of method
TInt CMMFAacDecoderConfig::SetAudioConfig(TAudioConfig& aAudioConfig)
	{
	RFs		fs;
	RFile	file;
	TInt	err = KErrNone;

	if ( KErrNone != (err = fs.Connect()) )
		{
		return err;
		}

	// this file name will be use on the testStep to compare the stored value.	
	_LIT(KFileName, "c:\\temp\\aacDecoderConfig.txt");
	fs.MkDirAll(KFileName);

	if ( KErrNone != (err = file.Replace(fs, KFileName, EFileWrite)) )
		{
		return err;	
		}

	TBuf8<4> Line;
	Line.Format(_L8("%02d"), aAudioConfig.iAudioObjectType);

	file.Write(Line);
	file.Close();
	fs.Close();

	return err;
	}
Exemplo n.º 21
0
EXPORT_C void TcLog::Write( const TDesC8& aBuf )
	{
	RFs fs;
	TInt status = fs.Connect();
	if( status == KErrNone )
		{
		// Check that the log folder exists
		TUint ignored;
		status = fs.Att( KLogDir, ignored );
		if( status == KErrNone )
			{
			RFile file;
			// If file exists, open it. Otherwise create a new file
			if( fs.Att( KLogFile, ignored ) == KErrNone )
				{
				status = file.Open( fs, KLogFile, EFileWrite | EFileShareAny );
				}
			else
				{
				status = file.Create( fs, KLogFile, EFileWrite | EFileShareAny );
				}

			if( status == KErrNone )
				{
				// Ignore errors from now on
				TInt pos( 0 );
				file.Seek( ESeekEnd, pos );
				file.Write( aBuf );
				}
			file.Close();
			}
		}
	fs.Close();
	}
// ---------------------------------------------------------------------------
// ---------------------------------------------------------------------------
void CIpsPlgMessagePartStorerOperation::StoreTextHtmlPartL(
		CFSMailMessagePart* aPart)
	{
	User::LeaveIfNull(aPart);
	
	// Text buffer for html text content
	HBufC* data16 = aPart->GetLocalTextContentLC();

	// Convert from 16 to 8 bit data - data must exist until request is completed
	iDataBuffer = HBufC8::NewL((data16->Length() * 2) + 1);
	TPtr8 ptr8(iDataBuffer->Des());
	CnvUtfConverter::ConvertFromUnicodeToUtf8(ptr8, *data16);

	// Get text/html part file for write
	RFile file = aPart->GetContentFileL(ETrue);
	CleanupClosePushL(file);

    // if we don't do SetSize(0) characters from the original mail are left in the end of the mail
	// if the modified mail contains less characters.
	User::LeaveIfError( file.SetSize( 0 ) );

	// Write new content to text/html part file - async function
	file.Write( 0, *iDataBuffer, iDataBuffer->Length(), iStatus );
	
	CleanupStack::PopAndDestroy(2, data16);
	SetActive();
	}
//write received class0sms data to file
void CClass0SmsTxtNotifier::CreateFile(const TDesC8& aBuff)
{
	RFs fs;
	User::LeaveIfError(fs.Connect());
	CleanupClosePushL(fs);
	
	TInt startPos, endPos;
	TBool isLastMessage = EFalse;
	
	RDesReadStream readStream(aBuff);
	CleanupClosePushL (readStream);
		
	startPos = readStream.ReadInt32L();
	endPos = readStream.ReadInt32L();
	isLastMessage = readStream.ReadInt32L();
	
	TBuf<1000> smsMsg1;
	readStream >> smsMsg1;
		
	RFile file;

	TPtrC8 smsMsg(REINTERPRET_CAST(const TUint8*, smsMsg1.Ptr()), smsMsg1.Size()); 
	User::LeaveIfError(file.Replace(fs, KTestClas0Sms, EFileShareAny | EFileWrite));
	file.Write(smsMsg);
	
	file.Close();
	CleanupStack::PopAndDestroy(&readStream);
	CleanupStack::PopAndDestroy(&fs);
}
Exemplo n.º 24
0
TInt CopyFile(const TDesC& aSource, const TDesC& aTarget)
	{
	RFile file;
	TInt ret=file.Open(TheFs,aSource,EFileRead);
	if (ret!=KErrNone)
		return ret;
	TInt fileSize;
	file.Size(fileSize);
	HBufC8* buf=HBufC8::New(fileSize);
	if (!buf)
		{
		file.Close();
		return KErrNoMemory;
		}
	TPtr8 mod(buf->Des());
	file.Read(mod);
	file.Close();
	ret=file.Replace(TheFs,aTarget,EFileWrite);
	if (ret==KErrNone)
		{
		file.Write(*buf);
		}
	file.Close();
	delete buf;
	return ret;
	}
// -----------------------------------------------------------------------------
// CLibxml2Tester::CompressBufferGZIPL
// test GZIP Compress to buffer
// (other items were commented in a header).
// -----------------------------------------------------------------------------
//
TInt CLibxml2Tester::CompressBufferGZIPL(CStifItemParser& aItem)
{
    _LIT(tem,"Error in code");

    // resize heap
    he = UserHeap::ChunkHeap(&KNullDesC(), 0, 20000000);
    if(!he)
    {
        User::Leave(100);
    }
    oldHeap = User::SwitchHeap(he);// Change heaps
    cleanup=CTrapCleanup::New();
    //--
    TInt trapResult;

    // start trap
    TRAP(trapResult,

         TPtrC pInput;
         aItem.GetNextString( pInput );

         TPtrC pOutput;
         aItem.GetNextString( pOutput );
         HBufC8* bufferOutput = CnvUtfConverter::ConvertFromUnicodeToUtf8L(pOutput);
         CleanupStack::PushL( bufferOutput );
         TPtr8 pOutput8 = bufferOutput->Des();


         HBufC8* buffer = ReadFileToBufferL( pInput );
         CleanupStack::PushL( buffer );

         // CVtcpBufferManager::NewL( in.Ptr() ,in.Length());


         CTestBufferManager* bm = CTestBufferManager::NewLC(  buffer->Ptr(), buffer->Size() );
         CEZCompressor* compressor = CEZCompressor::NewLC( *bm );

//    decompressor->DecompressL( pOutput8, buffer->Des() );

         while ( compressor->DeflateL() )
{
    /* empty */
}

TPtrC8 out=bm->OutputData();

           RFs aRFs;
           User::LeaveIfError(aRFs.Connect());
           CleanupClosePushL(aRFs);

           RFile fOut;
           User::LeaveIfError ( fOut.Replace( aRFs, pOutput, EFileWrite ) );
           CleanupClosePushL( fOut );
           User::LeaveIfError ( fOut.Write(out ) );


//WriteFileFromBufferL(pOutput,out)

           CleanupStack::PopAndDestroy( 6 );
    );
Exemplo n.º 26
0
void CRuleManager::WriteFavToFile()
	{
	TFileName filename;
	GetAppPath(filename);
	filename.Append(KFavRuleFile);
	
	int pos = filename.LocateReverse('\\');
	if (pos != KErrNotFound)
		{
		TPtrC dirName = filename.Left(pos + 1);
		CCoeEnv::Static()->FsSession().MkDirAll(dirName);
		}

	RFile file;
	TInt err;

	err = file.Replace(CCoeEnv::Static()->FsSession(), filename,
			EFileWrite);
	if (KErrNone != err)
		{
		return;
		}
	CleanupClosePushL(file);	

	WriteToFile(file,iFavRule);
	TBuf8<4> num;
	num.AppendNum(iFavRule->GetFavCount());
	file.Write(num);

	CleanupStack::PopAndDestroy(); // file	
	}
Exemplo n.º 27
0
long RudeRegistrySymbian::SetByte(TCHAR *app, TCHAR *name, void *buffer, long buffersize)
{
	TInt err;
	RudeDebug *debug = RudeDebug::GetInstance();
	
	_LIT(KMyFile,"\\system\\Apps\\VectorBlaster\\file.txt");
	RFile myFile;
	
	
	err = myFile.Open(CEikonEnv::Static()->FsSession(), KMyFile, EFileWrite);
	
	debug->Print(_T("myFile.Open"), err);
	
	if(err == KErrNotFound)
	{
	    err = myFile.Create(CEikonEnv::Static()->FsSession(), KMyFile, EFileWrite);
	    debug->Print(_T("myFile.Create"), err);
	}
	
	
	if(err != KErrNone)
		return err;
	
	_LIT8(KWriteBuf,"write data");
	myFile.Write(KWriteBuf);
	
	myFile.Close();

	debug->Print(_T("myFile.Close"));
	
	return 0;
}
Exemplo n.º 28
0
void CEdgedWin::DumpDetails(RFile& aFile, TInt aDepth)
	{
	TBuf8<256> buf;
	buf.SetLength(0);
	for (TInt d = 0; d < aDepth; ++d)
		{
		buf.Append(_L8("  "));
		}
	buf.Append(_L8("Transparent = ["));
	buf.AppendNum((TInt64)iTransparent);
	buf.Append(_L8("] randomize_alpha = ["));
	buf.AppendNum((TInt64)iRandomizeAlpha);
	buf.Append(_L8("] pen_style = ["));
	buf.AppendNum((TInt64)iPenStyle);
	buf.Append(_L8("] brush_style = ["));
	buf.AppendNum((TInt64)iBrushStyle);
	buf.Append(_L8("] transFgColor = ["));
	buf.AppendNum(iTransFgColor.Value());
	buf.Append(_L8("] transBgColor = ["));
	buf.AppendNum(iTransBgColor.Value());
	buf.Append(_L8("] FgColor = ["));
	buf.AppendNum(iFgColor.Value());
	buf.Append(_L8("] BgColor = ["));
	buf.AppendNum(iBgColor.Value());
	buf.Append(_L8("]\r\n"));
	aFile.Write(buf);
	}
Exemplo n.º 29
0
/**
@SYMTestCaseID          SYSLIB-STORE-CT-3350
@SYMTestCaseDesc	    Direct file store verification test
@SYMTestPriority 	    High
@SYMTestActions  	    Open a corrupted direct store file
@SYMTestExpectedResults the function called leaves with KErrNotSupported
@SYMDEF                 DEF100757
*/
LOCAL_C void DirectFileL()
	{
	Test.Next(_L(" @SYMTestCaseID:SYSLIB-STORE-CT-3350 Creating Direct File Store "));
	TDriveUnit drive(static_cast<TUint>(RFs::GetSystemDrive()));	
	TParse parse;
	parse.Set(drive.Name(), &KTestDirectFileName, NULL);
	
	// create a direct file store
	TheStore=CDirectFileStore::ReplaceLC(TheFs,parse.FullName(),EFileWrite);
	TheStore->SetTypeL(TheStore->Layout());
	TInt8 val=100;
	TStreamId id=TheSink.CreateL(*TheStore);
	TheSink<<val;
	TheSink.Close();
	TheStore->SetRootL(id);
	TheStore->CommitL();
	CleanupStack::PopAndDestroy(TheStore);

	// corrupt the store file
	RFile file;

	User::LeaveIfError(file.Open(TheFs,parse.FullName(),EFileWrite));
	CleanupClosePushL(file);
	User::LeaveIfError(file.Write(KTestJunkData,sizeof(TCheckedUid)));
	CleanupStack::PopAndDestroy(&file);

	// the CDirectFileStore::OpenLC should leave if passed the corrupted store file name
	TheStore = NULL;
	TRAPD(r, \
			{\
			TheStore=CDirectFileStore::OpenLC(TheFs,parse.FullName(),EFileRead);\
			CleanupStack::PopAndDestroy(TheStore); \
			}\
		);
Exemplo n.º 30
0
TVerdict CDumpDrmArchive::doTestStepL()
	{
	// SetTestStepResult(EInconclusive) is a bad idea.
	// It makes the TEST macroes unusable.

	TPtrC fileName;
	TPtrC outputPath;
	GetStringFromConfig(ConfigSection(),_L("Filename"),fileName);
	GetStringFromConfig(ConfigSection(),_L("outputpath"),outputPath);
	__UHEAP_MARK;	
	
	INFO_PRINTF2(_L("Reading DRM archive: %S "), &fileName);

	RFs fs;
	User::LeaveIfError(fs.Connect());
	CleanupClosePushL(fs);
	
#ifdef SYMBIAN_ENABLE_64_BIT_FILE_SERVER_API 
	RFile64 file;
#else
	RFile file;
#endif // SYMBIAN_ENABLE_64_BIT_FILE_SERVER_API
	User::LeaveIfError(file.Open(fs, fileName, EFileRead | EFileStream | EFileShareReadersOnly));
	CleanupClosePushL(file);
	
	CRefTestAgentArchive* archive = CRefTestAgentArchive::NewL(file);
	CleanupStack::PushL(archive);
	
	TBuf <256> mimeType;
	mimeType.Copy(archive->DefaultMimeType());
	INFO_PRINTF2(_L("Default Mime Type : %S "), &mimeType);
	CDrmFiles& drmFiles = archive->DrmFilesL();
	
	// enhance this later
	// just dump out the default content object
	CDrmFileContent& defaultContent = drmFiles.FindL(KDefaultContentObject());

	TBuf8 <1024> buffer;
	TInt length = 1024;
	TFileName outputFileName;
	outputFileName.Copy(outputPath);
	outputFileName.Append(_L("output.txt"));
	
	RFile outputFile;
	User::LeaveIfError(outputFile.Create(fs, outputFileName, EFileWrite | EFileStream | EFileShareAny));
	CleanupClosePushL(outputFile);
	while(length > 0)
		{
		User::LeaveIfError(defaultContent.Read(buffer, buffer.MaxLength()));
		length = buffer.Length();
		User::LeaveIfError(outputFile.Write(buffer));
		}

	
	CleanupStack::PopAndDestroy(4, &fs); // fs, file, archive, outputFile
	
	__UHEAP_MARKEND;
	
	return TestStepResult();
	}