// . slot should be auto-nuked upon transmission or error
// . TODO: ensure if this sendReply() fails does it really nuke the slot?
void gotListWrapper ( void *state , RdbList *listb , Msg5 *msg5xx ) {
logTrace( g_conf.m_logTraceMsg0, "BEGIN" );
// get the state
State00 *st0 = (State00 *)state;
// extract the udp slot and list and msg5
UdpSlot *slot = st0->m_slot;
RdbList *list = &st0->m_list;
Msg5 *msg5 = &st0->m_msg5;
UdpServer *us = st0->m_us;
// timing debug
if ( g_conf.m_logTimingNet || g_conf.m_logDebugNet ) {
//log("Msg0:hndled request %" PRIu64,gettimeofdayInMilliseconds());
int32_t size = -1;
if ( list ) size = list->getListSize();
log(LOG_TIMING|LOG_DEBUG,
"net: msg0: Handled request for data. "
"Now sending data termId=%" PRIu64" size=%" PRId32
" transId=%" PRId32" ip=%s port=%i took=%" PRId64" "
"(niceness=%" PRId32").",
g_posdb.getTermId(msg5->m_startKey),
size,slot->m_transId,
iptoa(slot->m_ip),slot->m_port,
gettimeofdayInMilliseconds() - st0->m_startTime ,
st0->m_niceness );
}
// on error nuke the list and it's data
if ( g_errno ) {
mdelete ( st0 , sizeof(State00) , "Msg0" );
delete (st0);
// TODO: free "slot" if this send fails
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply.", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot , g_errno );
return;
}
QUICKPOLL(st0->m_niceness);
// point to the serialized list in "list"
char *data = list->getList();
int32_t dataSize = list->getListSize();
char *alloc = list->getAlloc();
int32_t allocSize = list->getAllocSize();
// tell list not to free the data since it is a reply so UdpServer
// will free it when it destroys the slot
list->setOwnData ( false );
// keep track of stats
Rdb *rdb = getRdbFromId ( st0->m_rdbId );
if ( rdb ) rdb->sentReplyGet ( dataSize );
// TODO: can we free any memory here???
// keep track of how long it takes to complete the send
st0->m_startTime = gettimeofdayInMilliseconds();
// debug point
int32_t oldSize = msg5->m_minRecSizes;
int32_t newSize = msg5->m_minRecSizes + 20;
// watch for wrap around
if ( newSize < oldSize ) newSize = 0x7fffffff;
if ( dataSize > newSize && list->getFixedDataSize() == 0 &&
// do not annoy me with these linkdb msgs
dataSize > newSize+100 )
log(LOG_LOGIC,"net: msg0: Sending more data than what was "
"requested. Ineffcient. Bad engineer. dataSize=%" PRId32" "
"minRecSizes=%" PRId32".",dataSize,oldSize);
//
// for linkdb lists, remove all the keys that have the same IP32
// and store a count of what we removed somewhere
//
if ( st0->m_rdbId == RDB_LINKDB ) {
// store compressed list on itself
char *dst = list->m_list;
// keep stats
int32_t totalOrigLinks = 0;
int32_t ipDups = 0;
int32_t lastIp32 = 0;
char *listEnd = list->getListEnd();
// compress the list
for ( ; ! list->isExhausted() ; list->skipCurrentRecord() ) {
// breathe
QUICKPOLL ( st0->m_niceness );
// count it
totalOrigLinks++;
// get rec
char *rec = list->getCurrentRec();
int32_t ip32 = g_linkdb.getLinkerIp_uk((key224_t *)rec );
// same as one before?
if ( ip32 == lastIp32 &&
// are we the last rec? include that for
// advancing the m_nextKey in Linkdb more
// efficiently.
rec + LDBKS < listEnd ) {
ipDups++;
continue;
}
// store it
gbmemcpy (dst , rec , LDBKS );
dst += LDBKS;
// update it
lastIp32 = ip32;
}
// . if we removed one key, store the stats
// . caller should recognize reply is not a multiple of
// the linkdb key size LDBKS and no its there!
if ( ipDups ) {
//*(int32_t *)dst = totalOrigLinks;
//dst += 4;
//*(int32_t *)dst = ipDups;
//dst += 4;
}
// update list parms
list->m_listSize = dst - list->m_list;
list->m_listEnd = list->m_list + list->m_listSize;
data = list->getList();
dataSize = list->getListSize();
}
//log("sending replySize=%" PRId32" min=%" PRId32,dataSize,msg5->m_minRecSizes);
// . TODO: dataSize may not equal list->getListMaxSize() so
// Mem class may show an imblanace
// . now g_udpServer is responsible for freeing data/dataSize
// . the "true" means to call doneSending_ass() from the signal handler
// if need be
st0->m_us->sendReply_ass( data, dataSize, alloc, allocSize, slot, st0, doneSending_ass, -1, -1, true );
logTrace( g_conf.m_logTraceMsg0, "END" );
}
// . THIS Msg0 class must be alloc'd, i.e. not on the stack, etc.
// . if list is stored locally this tries to get it locally
// . otherwise tries to get the list from the network
// . returns false if blocked, true otherwise
// . sets g_errno on error
// . NOTE: i was having problems with queries being cached too long, you
// see the cache here is a NETWORK cache, so when the machines that owns
// the list updates it on disk it can't flush our cache... so use a small
// maxCacheAge of like , 30 seconds or so...
bool Msg0::getList ( int64_t hostId , // host to ask (-1 if none)
int32_t ip , // info on hostId
int16_t port ,
int32_t maxCacheAge , // max cached age in seconds
bool addToCache , // add net recv'd list to cache?
char rdbId , // specifies the rdb
collnum_t collnum ,
RdbList *list ,
const char *startKey ,
const char *endKey ,
int32_t minRecSizes , // use -1 for no max
void *state ,
void (* callback)(void *state ),//, RdbList *list ) ,
int32_t niceness ,
bool doErrorCorrection ,
bool includeTree ,
bool doMerge ,
int32_t firstHostId ,
int32_t startFileNum ,
int32_t numFiles ,
int64_t timeout ,
int64_t syncPoint ,
int32_t preferLocalReads ,
Msg5 *msg5 ,
bool isRealMerge ,
bool allowPageCache ,
bool forceLocalIndexdb ,
bool noSplit ,
int32_t forceParitySplit ) {
logTrace( g_conf.m_logTraceMsg0, "BEGIN. hostId: %" PRId64", rdbId: %d", hostId, (int)rdbId );
// warning
if ( collnum < 0 ) log(LOG_LOGIC,"net: NULL collection. msg0.");
// reset the list they passed us
list->reset();
// get keySize of rdb
m_ks = getKeySizeFromRdbId ( rdbId );
// if( g_conf.m_logTraceMsg0 )
// {
// log("%s:%s:%d: rdbId. [%d]", __FILE__,__func__,__LINE__, (int)rdbId);
// log("%s:%s:%d: m_ks.. [%d]", __FILE__,__func__,__LINE__, (int)m_ks);
// log("%s:%s:%d: hostId [%" PRId64"]", __FILE__,__func__,__LINE__, hostId);
// }
// if startKey > endKey, don't read anything
//if ( startKey > endKey ) return true;
if ( KEYCMP(startKey,endKey,m_ks)>0 ) { char *xx=NULL;*xx=0; }//rettrue
// . reset hostid if it is dead
// . this is causing UOR queries to take forever when we have a dead
if ( hostId >= 0 && g_hostdb.isDead ( hostId ) ) hostId = -1;
// no longer accept negative minrecsize
if ( minRecSizes < 0 ) {
g_errno = EBADENGINEER;
logTrace( g_conf.m_logTraceMsg0, "END" );
log(LOG_LOGIC, "net: msg0: Negative minRecSizes no longer supported.");
char *xx=NULL;*xx=0;
}
// remember these
m_state = state;
m_callback = callback;
m_list = list;
m_hostId = hostId;
m_niceness = niceness;
m_addToCache = addToCache;
// . these define our request 100%
KEYSET(m_startKey,startKey,m_ks);
KEYSET(m_endKey,endKey,m_ks);
m_minRecSizes = minRecSizes;
m_rdbId = rdbId;
m_collnum = collnum;// = coll;
m_isRealMerge = isRealMerge;
m_allowPageCache = allowPageCache;
// . group to ask is based on the first key
// . we only do 1 group per call right now
// . groupMask must turn on higher bits first (count downwards kinda)
// . titledb and spiderdb use special masks to get groupId
// if diffbot.cpp is reading spiderdb from each shard we have to
// get groupid from hostid here lest we core in getGroupId() below.
// it does that for dumping spiderdb to the client browser. they
// can download the whole enchilada.
if ( hostId >= 0 && m_rdbId == RDB_SPIDERDB )
m_shardNum = 0;
// did they force it? core until i figure out what this is
else if ( forceParitySplit >= 0 )
//m_groupId = g_hostdb.getGroupId ( forceParitySplit );
m_shardNum = forceParitySplit;
else
//m_groupId = getGroupId ( m_rdbId , startKey , ! noSplit );
m_shardNum = getShardNum ( m_rdbId , startKey );
// if we are looking up a termlist in posdb that is split by termid and
// not the usual docid then we have to set this posdb key bit that tells
// us that ...
if ( noSplit && m_rdbId == RDB_POSDB )
m_shardNum = g_hostdb.getShardNumByTermId ( startKey );
// how is this used?
if ( forceLocalIndexdb ) m_shardNum = getMyShardNum();
// if( g_conf.m_logTraceMsg0 ) log("%s:%s:%d: shardNum [%" PRId32"]", __FILE__,__func__, __LINE__, m_shardNum);
// . store these parameters
// . get a handle to the rdb in case we can satisfy locally
// . returns NULL and sets g_errno on error
QUICKPOLL((m_niceness));
Rdb *rdb = getRdbFromId ( m_rdbId );
if ( ! rdb ) return true;
// we need the fixedDataSize
m_fixedDataSize = rdb->getFixedDataSize();
m_useHalfKeys = rdb->useHalfKeys();
// . debug msg
// . Msg2 does this when checking for a cached compound list.
// compound lists do not actually exist, they are merges of smaller
// UOR'd lists.
if ( maxCacheAge != 0 && ! addToCache && (numFiles > 0 || includeTree)) {
log( LOG_LOGIC, "net: msg0: Weird. check but don't add... rdbid=%" PRId32".", ( int32_t ) m_rdbId );
}
// set this here since we may not call msg5 if list not local
//m_list->setFixedDataSize ( m_fixedDataSize );
// . now that we do load balancing we don't want to do a disk lookup
// even if local if we are merging or dumping
// . UNLESS g_conf.m_preferLocalReads is true
if ( preferLocalReads == -1 )
preferLocalReads = g_conf.m_preferLocalReads;
// . always prefer local for full split clusterdb
// . and keep the tfndb/titledb lookups in the same stripe
// . so basically we can't do biased caches if fully split
//if ( g_conf.m_fullSplit ) preferLocalReads = true;
preferLocalReads = true;
// it it stored locally?
bool isLocal = ( m_hostId == -1 && //g_hostdb.m_groupId == m_groupId );
m_shardNum == getMyShardNum() );
// only do local lookups if this is true
if ( ! preferLocalReads ) isLocal = false;
/*
int64_t singleDocIdQuery = 0LL;
if ( rdbId == RDB_POSDB ) {
int64_t d1 = g_posdb.getDocId(m_startKey);
int64_t d2 = g_posdb.getDocId(m_endKey);
if ( d1+1 == d2 ) singleDocIdQuery = d1;
}
// . try the LOCAL termlist cache
// . so when msg2 is evaluating a gbdocid:| query and it has to
// use msg0 to go across the network to get the same damn termlist
// over and over again for the same docid, this will help alot.
// . ideally it'd be nice if the seo pipe in xmldoc.cpp can try to
// send the same gbdocid:xxxx docids to the same hosts. maybe hash
// based on docid into the list of hosts and if that host is busy
// just chain until we find someone not busy.
if ( singleDocIdQuery &&
getListFromTermListCache ( coll,
m_startKey,
m_endKey,
maxCacheAge,
list ) )
// found!
return true;
*/
// but always local if only one host
if ( g_hostdb.getNumHosts() == 1 ) isLocal = true;
// . if the group is local then do it locally
// . Msg5::getList() returns false if blocked, true otherwise
// . Msg5::getList() sets g_errno on error
// . don't do this if m_hostId was specified
if ( isLocal ) {
logTrace( g_conf.m_logTraceMsg0, "isLocal" );
if ( msg5 ) {
m_msg5 = msg5;
m_deleteMsg5 = false;
}
else {
try { m_msg5 = new ( Msg5 ); }
catch ( ... ) {
g_errno = ENOMEM;
log("net: Local alloc for disk read failed "
"while tring to read data for %s. "
"Trying remote request.",
getDbnameFromId(m_rdbId));
goto skip;
}
mnew ( m_msg5 , sizeof(Msg5) , "Msg0::Msg5" );
m_deleteMsg5 = true;
}
QUICKPOLL(m_niceness);
if ( ! m_msg5->getList ( rdbId,
m_collnum ,
m_list ,
m_startKey ,
m_endKey ,
m_minRecSizes ,
includeTree , // include Tree?
addToCache , // addToCache?
maxCacheAge ,
startFileNum ,
numFiles ,
this ,
gotListWrapper2 ,
niceness ,
doErrorCorrection ,
NULL , // cacheKeyPtr
0 , // retryNum
-1 , // maxRetries
true , // compensateForMerge
syncPoint ,
m_isRealMerge ,
m_allowPageCache ) ) {
logTrace( g_conf.m_logTraceMsg0, "END, return false" );
return false;
}
// nuke it
reset();
logTrace( g_conf.m_logTraceMsg0, "END, return true" );
return true;
}
skip:
// debug msg
if ( g_conf.m_logDebugQuery )
log(LOG_DEBUG,"net: msg0: Sending request for data to "
"shard=%" PRIu32" "
"listPtr=%" PTRFMT" minRecSizes=%" PRId32" termId=%" PRIu64" "
//"startKey.n1=%" PRIx32",n0=%" PRIx64" (niceness=%" PRId32")",
"startKey.n1=%" PRIx64",n0=%" PRIx64" (niceness=%" PRId32")",
//g_hostdb.makeHostId ( m_groupId ) ,
m_shardNum,
(PTRTYPE)m_list,
m_minRecSizes, g_posdb.getTermId(m_startKey) ,
//m_startKey.n1,m_startKey.n0 , (int32_t)m_niceness);
KEY1(m_startKey,m_ks),KEY0(m_startKey),
(int32_t)m_niceness);
char *replyBuf = NULL;
int32_t replyBufMaxSize = 0;
bool freeReply = true;
// . make a request with the info above (note: not in network order)
// . IMPORTANT!!!!! if you change this change
// Multicast.cpp::sleepWrapper1 too!!!!!!!!!!!!
// no, not anymore, we commented out that request peeking code
char *p = m_request;
*(int64_t *) p = syncPoint ; p += 8;
//*(key_t *) p = m_startKey ; p += sizeof(key_t);
//*(key_t *) p = m_endKey ; p += sizeof(key_t);
*(int32_t *) p = m_minRecSizes ; p += 4;
*(int32_t *) p = startFileNum ; p += 4;
*(int32_t *) p = numFiles ; p += 4;
*(int32_t *) p = maxCacheAge ; p += 4;
if ( p - m_request != RDBIDOFFSET ) { char *xx=NULL;*xx=0; }
*p = m_rdbId ; p++;
*p = addToCache ; p++;
*p = doErrorCorrection; p++;
*p = includeTree ; p++;
*p = (char)niceness ; p++;
*p = (char)m_allowPageCache; p++;
KEYSET(p,m_startKey,m_ks); ; p+=m_ks;
KEYSET(p,m_endKey,m_ks); ; p+=m_ks;
// NULL terminated collection name
//strcpy ( p , coll ); p += gbstrlen ( coll ); *p++ = '\0';
*(collnum_t *)p = m_collnum; p += sizeof(collnum_t);
m_requestSize = p - m_request;
// ask an individual host for this list if hostId is NOT -1
if ( m_hostId != -1 ) {
// get Host
Host *h = g_hostdb.getHost ( m_hostId );
if ( ! h ) {
g_errno = EBADHOSTID;
log(LOG_LOGIC,"net: msg0: Bad hostId of %" PRId64".", m_hostId);
logTrace( g_conf.m_logTraceMsg0, "END, return true. Bad hostId" );
return true;
}
// if niceness is 0, use the higher priority udpServer
UdpServer *us ;
uint16_t port;
QUICKPOLL(m_niceness);
us = &g_udpServer ; port = h->m_port ;
// . returns false on error and sets g_errno, true otherwise
// . calls callback when reply is received (or error)
// . we return true if it returns false
if ( ! us->sendRequest ( m_request ,
m_requestSize ,
0x00 , // msgType
h->m_ip ,
port ,
m_hostId ,
NULL , // the slotPtr
this ,
gotSingleReplyWrapper ,
timeout ,
-1 , // backoff
-1 , // maxwait
replyBuf ,
replyBufMaxSize ,
m_niceness ) ) { // cback niceness
logTrace( g_conf.m_logTraceMsg0, "END, return true. Request sent" );
return true;
}
// return false cuz it blocked
logTrace( g_conf.m_logTraceMsg0, "END, return false. sendRequest blocked" );
return false;
}
// timing debug
if ( g_conf.m_logTimingNet )
m_startTime = gettimeofdayInMilliseconds();
else
m_startTime = 0;
// . get the top int32_t of the key
// . i guess this will work for 128 bit keys... hmmmmm
int32_t keyTop = hash32 ( (char *)startKey , m_ks );
// . otherwise, multicast to a host in group "groupId"
// . returns false and sets g_errno on error
// . calls callback on completion
// . select first host to send to in group based on upper 32 bits
// of termId (m_startKey.n1)
// . need to send out to all the indexdb split hosts
m_numRequests = 0;
m_numReplies = 0;
//for ( int32_t i = 0; i < m_numSplit; i++ ) {
QUICKPOLL(m_niceness);
//int32_t gr;
char *buf;
buf = replyBuf;
// get the multicast
Multicast *m = &m_mcast;
if ( ! m->send ( m_request ,
m_requestSize,
0x00 , // msgType 0x00
false , // does multicast own request?
m_shardNum ,
false , // send to whole group?
//m_startKey.n1, // key is passed on startKey
keyTop , // key is passed on startKey
this , // state data
NULL , // state data
gotMulticastReplyWrapper0 ,
timeout*1000 , // timeout
niceness ,
firstHostId ,
buf ,
replyBufMaxSize ,
freeReply , // free reply buf?
true , // do disk load balancing?
maxCacheAge ,
//(key_t *)cacheKey ,
// multicast uses it for determining the best
// host to send the request to when doing
// disk load balancing. if the host has our
// data cached, then it will probably get to
// handle the request. for now let's just assume
// this is a 96-bit key. TODO: fix...
0 , // *(key_t *)cacheKey ,
rdbId ,
minRecSizes ) )
{
log(LOG_ERROR, "net: Failed to send request for data from %s in shard "
"#%" PRIu32" over network: %s.",
getDbnameFromId(m_rdbId),m_shardNum, mstrerror(g_errno));
// but speed it up
m_errno = g_errno;
m->reset();
if ( m_numRequests > 0 ) {
logTrace( g_conf.m_logTraceMsg0, "END - returning false" );
return false;
}
logTrace( g_conf.m_logTraceMsg0, "END - returning true" );
return true;
}
m_numRequests++;
// we blocked
logTrace( g_conf.m_logTraceMsg0, "END - returning false, blocked" );
return false;
}
// . THIS Msg0 class must be alloc'd, i.e. not on the stack, etc.
// . if list is stored locally this tries to get it locally
// . otherwise tries to get the list from the network
// . returns false if blocked, true otherwise
// . sets g_errno on error
// . NOTE: i was having problems with queries being cached too long, you
// see the cache here is a NETWORK cache, so when the machines that owns
// the list updates it on disk it can't flush our cache... so use a small
// maxCacheAge of like , 30 seconds or so...
bool Msg0::getList ( int64_t hostId , // host to ask (-1 if none)
int32_t ip , // info on hostId
int16_t port ,
int32_t maxCacheAge , // max cached age in seconds
bool addToCache , // add net recv'd list to cache?
char rdbId , // specifies the rdb
//char *coll ,
collnum_t collnum ,
RdbList *list ,
//key_t startKey ,
//key_t endKey ,
char *startKey ,
char *endKey ,
int32_t minRecSizes , // use -1 for no max
void *state ,
void (* callback)(void *state ),//, RdbList *list ) ,
int32_t niceness ,
bool doErrorCorrection ,
bool includeTree ,
bool doMerge ,
int32_t firstHostId ,
int32_t startFileNum ,
int32_t numFiles ,
int32_t timeout ,
int64_t syncPoint ,
int32_t preferLocalReads ,
Msg5 *msg5 ,
Msg5 *msg5b ,
bool isRealMerge ,
//#ifdef SPLIT_INDEXDB
bool allowPageCache ,
bool forceLocalIndexdb ,
bool noSplit , // doIndexdbSplit ,
int32_t forceParitySplit ) {
//#else
// bool allowPageCache ) {
//#endif
// this is obsolete! mostly, but we need it for PageIndexdb.cpp to
// show a "termlist" for a given query term in its entirety so you
// don't have to check each machine in the network. if this is true it
// means to query each split and merge the results together into a
// single unified termlist. only applies to indexdb/datedb.
//if ( doIndexdbSplit ) { char *xx = NULL; *xx = 0; }
// note this because if caller is wrong it hurts performance major!!
//if ( doIndexdbSplit )
// logf(LOG_DEBUG,"net: doing msg0 with indexdb split true");
// warning
if ( collnum < 0 ) log(LOG_LOGIC,"net: NULL collection. msg0.");
//if ( doIndexdbSplit ) { char *xx=NULL;*xx=0; }
// reset the list they passed us
list->reset();
// get keySize of rdb
m_ks = getKeySizeFromRdbId ( rdbId );
// if startKey > endKey, don't read anything
//if ( startKey > endKey ) return true;
if ( KEYCMP(startKey,endKey,m_ks)>0 ) { char *xx=NULL;*xx=0; }//rettrue
// . reset hostid if it is dead
// . this is causing UOR queries to take forever when we have a dead
if ( hostId >= 0 && g_hostdb.isDead ( hostId ) ) hostId = -1;
// no longer accept negative minrecsize
if ( minRecSizes < 0 ) {
g_errno = EBADENGINEER;
log(LOG_LOGIC,
"net: msg0: Negative minRecSizes no longer supported.");
char *xx=NULL;*xx=0;
return true;
}
// debug msg
//if ( niceness != 0 ) log("HEY start");
// ensure startKey last bit clear, endKey last bit set
//if ( (startKey.n0 & 0x01) == 0x01 )
// log("Msg0::getList: warning startKey lastbit set");
//if ( (endKey.n0 & 0x01) == 0x00 )
// log("Msg0::getList: warning endKey lastbit clear");
// remember these
m_state = state;
m_callback = callback;
m_list = list;
m_hostId = hostId;
m_niceness = niceness;
//m_ip = ip;
//m_port = port;
m_addToCache = addToCache;
// . these define our request 100%
//m_startKey = startKey;
//m_endKey = endKey;
KEYSET(m_startKey,startKey,m_ks);
KEYSET(m_endKey,endKey,m_ks);
m_minRecSizes = minRecSizes;
m_rdbId = rdbId;
m_collnum = collnum;// = coll;
m_isRealMerge = isRealMerge;
m_allowPageCache = allowPageCache;
// . group to ask is based on the first key
// . we only do 1 group per call right now
// . groupMask must turn on higher bits first (count downwards kinda)
// . titledb and spiderdb use special masks to get groupId
// if diffbot.cpp is reading spiderdb from each shard we have to
// get groupid from hostid here lest we core in getGroupId() below.
// it does that for dumping spiderdb to the client browser. they
// can download the whole enchilada.
if ( hostId >= 0 && m_rdbId == RDB_SPIDERDB )
m_shardNum = 0;
// did they force it? core until i figure out what this is
else if ( forceParitySplit >= 0 )
//m_groupId = g_hostdb.getGroupId ( forceParitySplit );
m_shardNum = forceParitySplit;
else
//m_groupId = getGroupId ( m_rdbId , startKey , ! noSplit );
m_shardNum = getShardNum ( m_rdbId , startKey );
// if we are looking up a termlist in posdb that is split by termid and
// not the usual docid then we have to set this posdb key bit that tells
// us that ...
if ( noSplit && m_rdbId == RDB_POSDB )
m_shardNum = g_hostdb.getShardNumByTermId ( startKey );
// how is this used?
//if ( forceLocalIndexdb ) m_groupId = g_hostdb.m_groupId;
if ( forceLocalIndexdb ) m_shardNum = getMyShardNum();
// . store these parameters
// . get a handle to the rdb in case we can satisfy locally
// . returns NULL and sets g_errno on error
QUICKPOLL((m_niceness));
Rdb *rdb = getRdbFromId ( m_rdbId );
if ( ! rdb ) return true;
// we need the fixedDataSize
m_fixedDataSize = rdb->getFixedDataSize();
m_useHalfKeys = rdb->useHalfKeys();
// . debug msg
// . Msg2 does this when checking for a cached compound list.
// compound lists do not actually exist, they are merges of smaller
// UOR'd lists.
if ( maxCacheAge != 0 && ! addToCache && (numFiles > 0 || includeTree))
log(LOG_LOGIC,"net: msg0: "
"Weird. check but don't add... rdbid=%"INT32".",(int32_t)m_rdbId);
// set this here since we may not call msg5 if list not local
//m_list->setFixedDataSize ( m_fixedDataSize );
// . now that we do load balancing we don't want to do a disk lookup
// even if local if we are merging or dumping
// . UNLESS g_conf.m_preferLocalReads is true
if ( preferLocalReads == -1 )
preferLocalReads = g_conf.m_preferLocalReads;
// . always prefer local for full split clusterdb
// . and keep the tfndb/titledb lookups in the same stripe
// . so basically we can't do biased caches if fully split
//if ( g_conf.m_fullSplit ) preferLocalReads = true;
preferLocalReads = true;
// it it stored locally?
bool isLocal = ( m_hostId == -1 && //g_hostdb.m_groupId == m_groupId );
m_shardNum == getMyShardNum() );
// only do local lookups if this is true
if ( ! preferLocalReads ) isLocal = false;
/*
m_numSplit = 1;
if ( g_hostdb.m_indexSplits > 1 &&
( rdbId == RDB_POSDB || rdbId==RDB_DATEDB)&&
! forceLocalIndexdb && doIndexdbSplit ) {
isLocal = false;
//m_numSplit = INDEXDB_SPLIT;
m_numSplit = g_hostdb.m_indexSplits;
char *xx=NULL;*xx=0;
}
*/
/*
int64_t singleDocIdQuery = 0LL;
if ( rdbId == RDB_POSDB ) {
int64_t d1 = g_posdb.getDocId(m_startKey);
int64_t d2 = g_posdb.getDocId(m_endKey);
if ( d1+1 == d2 ) singleDocIdQuery = d1;
}
// . try the LOCAL termlist cache
// . so when msg2 is evaluating a gbdocid:| query and it has to
// use msg0 to go across the network to get the same damn termlist
// over and over again for the same docid, this will help alot.
// . ideally it'd be nice if the seo pipe in xmldoc.cpp can try to
// send the same gbdocid:xxxx docids to the same hosts. maybe hash
// based on docid into the list of hosts and if that host is busy
// just chain until we find someone not busy.
if ( singleDocIdQuery &&
getListFromTermListCache ( coll,
m_startKey,
m_endKey,
maxCacheAge,
list ) )
// found!
return true;
*/
// but always local if only one host
if ( g_hostdb.getNumHosts() == 1 ) isLocal = true;
// force a msg0 if doing a docid restrictive query like
// gbdocid:xxxx|<query> so we call cacheTermLists()
//if ( singleDocIdQuery ) isLocal = false;
// . if the group is local then do it locally
// . Msg5::getList() returns false if blocked, true otherwise
// . Msg5::getList() sets g_errno on error
// . don't do this if m_hostId was specified
if ( isLocal ) { // && !g_conf.m_interfaceMachine ) {
if ( msg5 ) {
m_msg5 = msg5;
m_deleteMsg5 = false;
}
else {
try { m_msg5 = new ( Msg5 ); }
catch ( ... ) {
g_errno = ENOMEM;
log("net: Local alloc for disk read failed "
"while tring to read data for %s. "
"Trying remote request.",
getDbnameFromId(m_rdbId));
goto skip;
}
mnew ( m_msg5 , sizeof(Msg5) , "Msg0" );
m_deleteMsg5 = true;
}
QUICKPOLL(m_niceness);
// same for msg5b
if ( msg5b ) {
m_msg5b = msg5b;
m_deleteMsg5b = false;
}
/*
else if ( m_rdbId == RDB_TITLEDB ) {
try { m_msg5b = new ( Msg5 ); }
catch ( ... ) {
g_errno = ENOMEM;
log("net: Local alloc for disk read failed "
"while tring to read data for %s. "
"Trying remote request. 2.",
getDbnameFromId(m_rdbId));
goto skip;
}
mnew ( m_msg5b , sizeof(Msg5) , "Msg0b" );
m_deleteMsg5b = true;
}
*/
QUICKPOLL(m_niceness);
if ( ! m_msg5->getList ( rdbId,
m_collnum ,
m_list ,
m_startKey ,
m_endKey ,
m_minRecSizes ,
includeTree , // include Tree?
addToCache , // addToCache?
maxCacheAge ,
startFileNum ,
numFiles ,
this ,
gotListWrapper2 ,
niceness ,
doErrorCorrection ,
NULL , // cacheKeyPtr
0 , // retryNum
-1 , // maxRetries
true , // compensateForMerge
syncPoint ,
NULL,//m_msg5b ,
m_isRealMerge ,
m_allowPageCache ) ) return false;
// nuke it
reset();
return true;
}
skip:
// debug msg
if ( g_conf.m_logDebugQuery )
log(LOG_DEBUG,"net: msg0: Sending request for data to "
"shard=%"UINT32" "
"listPtr=%"PTRFMT" minRecSizes=%"INT32" termId=%"UINT64" "
//"startKey.n1=%"XINT32",n0=%"XINT64" (niceness=%"INT32")",
"startKey.n1=%"XINT64",n0=%"XINT64" (niceness=%"INT32")",
//g_hostdb.makeHostId ( m_groupId ) ,
m_shardNum,
(PTRTYPE)m_list,
m_minRecSizes, g_posdb.getTermId(m_startKey) ,
//m_startKey.n1,m_startKey.n0 , (int32_t)m_niceness);
KEY1(m_startKey,m_ks),KEY0(m_startKey),
(int32_t)m_niceness);
char *replyBuf = NULL;
int32_t replyBufMaxSize = 0;
bool freeReply = true;
// adjust niceness for net transmission
bool realtime = false;
//if ( minRecSizes + 32 < TMPBUFSIZE ) realtime = true;
// if we're niceness 0 we need to pre-allocate for reply since it
// might be received within the asynchronous signal handler which
// cannot call mmalloc()
if ( realtime ) { // niceness <= 0 || netnice == 0 ) {
// . we should not get back more than minRecSizes bytes since
// we are now performing merges
// . it should not slow things down too much since the hashing
// is 10 times slower than merging anyhow...
// . CAUTION: if rdb is not fixed-datasize then this will
// not work for us! it can exceed m_minRecSizes.
replyBufMaxSize = m_minRecSizes ;
// . get a little extra to fix the error where we ask for 64
// but get 72
// . where is that coming from?
// . when getting titleRecs we often exceed the minRecSizes
// . ?Msg8? was having trouble. was int16_t 32 bytes sometimes.
replyBufMaxSize += 36;
// why add ten percent?
//replyBufMaxSize *= 110 ;
//replyBufMaxSize /= 100 ;
// make a buffer to hold the reply
//#ifdef SPLIT_INDEXDB
/*
if ( m_numSplit > 1 ) {
m_replyBufSize = replyBufMaxSize * m_numSplit;
replyBuf = (char *) mmalloc(m_replyBufSize, "Msg0");
m_replyBuf = replyBuf;
freeReply = false;
}
else
*/
//#endif
replyBuf = (char *) mmalloc(replyBufMaxSize , "Msg0");
// g_errno is set and we return true if it failed
if ( ! replyBuf ) {
log("net: Failed to pre-allocate %"INT32" bytes to hold "
"data read remotely from %s: %s.",
replyBufMaxSize,getDbnameFromId(m_rdbId),
mstrerror(g_errno));
return true;
}
}
// . make a request with the info above (note: not in network order)
// . IMPORTANT!!!!! if you change this change
// Multicast.cpp::sleepWrapper1 too!!!!!!!!!!!!
// no, not anymore, we commented out that request peeking code
char *p = m_request;
*(int64_t *) p = syncPoint ; p += 8;
//*(key_t *) p = m_startKey ; p += sizeof(key_t);
//*(key_t *) p = m_endKey ; p += sizeof(key_t);
*(int32_t *) p = m_minRecSizes ; p += 4;
*(int32_t *) p = startFileNum ; p += 4;
*(int32_t *) p = numFiles ; p += 4;
*(int32_t *) p = maxCacheAge ; p += 4;
if ( p - m_request != RDBIDOFFSET ) { char *xx=NULL;*xx=0; }
*p = m_rdbId ; p++;
*p = addToCache ; p++;
*p = doErrorCorrection; p++;
*p = includeTree ; p++;
*p = (char)niceness ; p++;
*p = (char)m_allowPageCache; p++;
KEYSET(p,m_startKey,m_ks); ; p+=m_ks;
KEYSET(p,m_endKey,m_ks); ; p+=m_ks;
// NULL terminated collection name
//strcpy ( p , coll ); p += gbstrlen ( coll ); *p++ = '\0';
*(collnum_t *)p = m_collnum; p += sizeof(collnum_t);
m_requestSize = p - m_request;
// ask an individual host for this list if hostId is NOT -1
if ( m_hostId != -1 ) {
// get Host
Host *h = g_hostdb.getHost ( m_hostId );
if ( ! h ) {
g_errno = EBADHOSTID;
log(LOG_LOGIC,"net: msg0: Bad hostId of %"INT64".",
m_hostId);
return true;
}
// if niceness is 0, use the higher priority udpServer
UdpServer *us ;
uint16_t port;
QUICKPOLL(m_niceness);
//if ( niceness <= 0 || netnice == 0 ) {
//if ( realtime ) {
// us = &g_udpServer2; port = h->m_port2; }
//else {
us = &g_udpServer ; port = h->m_port ;
// . returns false on error and sets g_errno, true otherwise
// . calls callback when reply is received (or error)
// . we return true if it returns false
if ( ! us->sendRequest ( m_request ,
m_requestSize ,
0x00 , // msgType
h->m_ip ,
port ,
m_hostId ,
NULL , // the slotPtr
this ,
gotSingleReplyWrapper ,
timeout ,
-1 , // backoff
-1 , // maxwait
replyBuf ,
replyBufMaxSize ,
m_niceness ) ) // cback niceness
return true;
// return false cuz it blocked
return false;
}
// timing debug
if ( g_conf.m_logTimingNet )
m_startTime = gettimeofdayInMilliseconds();
else
m_startTime = 0;
//if ( m_rdbId == RDB_INDEXDB ) log("Msg0:: getting remote indexlist. "
// "termId=%"UINT64", "
// "groupNum=%"UINT32"",
// g_indexdb.getTermId(m_startKey) ,
// g_hostdb.makeHostId ( m_groupId ) );
/*
// make the cache key so we can see what remote host cached it, if any
char cacheKey[MAX_KEY_BYTES];
//key_t cacheKey = makeCacheKey ( startKey ,
makeCacheKey ( startKey ,
endKey ,
includeTree ,
minRecSizes ,
startFileNum ,
numFiles ,
cacheKey ,
m_ks );
*/
// . get the top int32_t of the key
// . i guess this will work for 128 bit keys... hmmmmm
int32_t keyTop = hash32 ( (char *)startKey , m_ks );
/*
// allocate space
if ( m_numSplit > 1 ) {
int32_t need = m_numSplit * sizeof(Multicast) ;
char *buf = (char *)mmalloc ( need,"msg0mcast" );
if ( ! buf ) return true;
m_mcasts = (Multicast *)buf;
for ( int32_t i = 0; i < m_numSplit ; i++ )
m_mcasts[i].constructor();
}
*/
// . otherwise, multicast to a host in group "groupId"
// . returns false and sets g_errno on error
// . calls callback on completion
// . select first host to send to in group based on upper 32 bits
// of termId (m_startKey.n1)
//#ifdef SPLIT_INDEXDB
// . need to send out to all the indexdb split hosts
m_numRequests = 0;
m_numReplies = 0;
//for ( int32_t i = 0; i < m_numSplit; i++ ) {
QUICKPOLL(m_niceness);
//int32_t gr;
char *buf;
/*
if ( m_numSplit > 1 ) {
gr = g_indexdb.getSplitGroupId ( baseGroupId, i );
buf = &replyBuf[i*replyBufMaxSize];
}
else {
*/
//gr = m_groupId;
buf = replyBuf;
//}
// get the multicast
Multicast *m = &m_mcast;
//if ( m_numSplit > 1 ) m = &m_mcasts[i];
if ( ! m->send ( m_request ,
//#else
// if ( ! m_mcast.send ( m_request ,
//#endif
m_requestSize,
0x00 , // msgType 0x00
false , // does multicast own request?
m_shardNum ,
//#ifdef SPLIT_INDEXDB
// gr , // group + offset
//#else
// m_groupId , // group to send to (groupKey)
//#endif
false , // send to whole group?
//m_startKey.n1, // key is passed on startKey
keyTop , // key is passed on startKey
this , // state data
NULL , // state data
gotMulticastReplyWrapper0 ,
timeout , // timeout in seconds (was 30)
niceness ,
realtime ,
firstHostId ,
//#ifdef SPLIT_INDEXDB
// &replyBuf[i*replyBufMaxSize] ,
//#else
// replyBuf ,
//#endif
buf ,
replyBufMaxSize ,
freeReply , // free reply buf?
true , // do disk load balancing?
maxCacheAge ,
//(key_t *)cacheKey ,
// multicast uses it for determining the best
// host to send the request to when doing
// disk load balancing. if the host has our
// data cached, then it will probably get to
// handle the request. for now let's just assume
// this is a 96-bit key. TODO: fix...
0 , // *(key_t *)cacheKey ,
rdbId ,
minRecSizes ) ) {
log("net: Failed to send request for data from %s in shard "
"#%"UINT32" over network: %s.",
getDbnameFromId(m_rdbId),m_shardNum, mstrerror(g_errno));
// no, multicast will free this when it is destroyed
//if (replyBuf) mfree ( replyBuf , replyBufMaxSize , "Msg22" );
// but speed it up
//#ifdef SPLIT_INDEXDB
m_errno = g_errno;
m->reset();
if ( m_numRequests > 0 )
return false;
//#else
// m_mcast.reset();
//#endif
return true;
}
//#ifdef SPLIT_INDEXDB
m_numRequests++;
//#endif
// we blocked
return false;
}
// . reply to a request for an RdbList
// . MUST call g_udpServer::sendReply or sendErrorReply() so slot can
// be destroyed
void handleRequest0 ( UdpSlot *slot , int32_t netnice ) {
logTrace( g_conf.m_logTraceMsg0, "BEGIN. Got request for an RdbList" );
// if niceness is 0, use the higher priority udpServer
UdpServer *us = &g_udpServer;
//if ( netnice == 0 ) us = &g_udpServer2;
// get the request
char *request = slot->m_readBuf;
int32_t requestSize = slot->m_readBufSize;
// collection is now stored in the request, so i commented this out
//if ( requestSize != MSG0_REQ_SIZE ) {
// log("net: Received bad data request size of %" PRId32" bytes. "
// "Should be %" PRId32".", requestSize ,(int32_t)MSG0_REQ_SIZE);
// us->sendErrorReply ( slot , EBADREQUESTSIZE );
// return;
//}
// parse the request
char *p = request;
int64_t syncPoint = *(int64_t *)p ; p += 8;
//key_t startKey = *(key_t *)p ; p += sizeof(key_t);
//key_t endKey = *(key_t *)p ; p += sizeof(key_t);
int32_t minRecSizes = *(int32_t *)p ; p += 4;
int32_t startFileNum = *(int32_t *)p ; p += 4;
int32_t numFiles = *(int32_t *)p ; p += 4;
int32_t maxCacheAge = *(int32_t *)p ; p += 4;
char rdbId = *p++;
char addToCache = *p++;
char doErrorCorrection = *p++;
char includeTree = *p++;
// this was messing up our niceness conversion logic
int32_t niceness = slot->m_niceness;//(int32_t)(*p++);
// still need to skip it though!
p++;
bool allowPageCache = (bool)(*p++);
char ks = getKeySizeFromRdbId ( rdbId );
char *startKey = p; p+=ks;
char *endKey = p; p+=ks;
collnum_t collnum = *(collnum_t *)p; p += sizeof(collnum_t);
CollectionRec *xcr = g_collectiondb.getRec ( collnum );
if ( ! xcr ) g_errno = ENOCOLLREC;
if( g_conf.m_logTraceMsg0 ) {
logTrace( g_conf.m_logTraceMsg0, "rdbId....... %d", (int)rdbId );
logTrace( g_conf.m_logTraceMsg0, "key size.... %d", (int)ks );
logTrace( g_conf.m_logTraceMsg0, "startFileNum %" PRId32, startFileNum );
logTrace( g_conf.m_logTraceMsg0, "numFiles.... %" PRId32, numFiles );
}
// error set from XmlDoc::cacheTermLists()?
if ( g_errno ) {
logTrace( g_conf.m_logTraceMsg0, "END. Invalid collection" );
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply.", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot , EBADRDBID );
return;
}
// . get the rdb we need to get the RdbList from
// . returns NULL and sets g_errno on error
//Msg0 msg0;
//Rdb *rdb = msg0.getRdb ( rdbId );
Rdb *rdb = getRdbFromId ( rdbId );
if ( ! rdb ) {
logTrace( g_conf.m_logTraceMsg0, "END. Invalid rdbId" );
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply.", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot , EBADRDBID );
return;
}
// keep track of stats
rdb->readRequestGet ( requestSize );
// . do a local get
// . create a msg5 to get the list
State00 *st0 ;
try { st0 = new (State00); }
catch ( ... ) {
g_errno = ENOMEM;
log("Msg0: new(%" PRId32"): %s",
(int32_t)sizeof(State00),mstrerror(g_errno));
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply.", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot , g_errno );
return;
}
mnew ( st0 , sizeof(State00) , "State00" );
// timing debug
if ( g_conf.m_logTimingNet )
st0->m_startTime = gettimeofdayInMilliseconds();
// save slot in state
st0->m_slot = slot;
// save udp server to send back reply on
st0->m_us = us;
// init this one
st0->m_niceness = niceness;
st0->m_rdbId = rdbId;
QUICKPOLL(niceness);
// debug msg
if ( maxCacheAge != 0 && ! addToCache ) {
log( LOG_LOGIC, "net: msg0: check but don't add... rdbid=%" PRId32".", ( int32_t ) rdbId );
}
// . if this request came over on the high priority udp server
// make sure the priority gets passed along
// . return if this blocks
// . we'll call sendReply later
if ( ! st0->m_msg5.getList ( rdbId ,
collnum ,
&st0->m_list ,
startKey ,
endKey ,
minRecSizes ,
includeTree , // include tree?
addToCache , // addToCache?
maxCacheAge ,
startFileNum ,
numFiles ,
st0 ,
gotListWrapper ,
niceness ,
doErrorCorrection ,
NULL , // cacheKeyPtr
0 , // retryNum
2 , // maxRetries
true , // compensateForMerge
syncPoint ,
false,
allowPageCache ) ) {
logTrace( g_conf.m_logTraceMsg0, "END. m_msg5.getList returned false" );
return;
}
// call wrapper ouselves
logTrace( g_conf.m_logTraceMsg0, "Calling gotListWrapper" );
gotListWrapper ( st0 , NULL , NULL );
logTrace( g_conf.m_logTraceMsg0, "END" );
}
// . reply to a request for an RdbList
// . MUST call g_udpServer::sendReply or sendErrorReply() so slot can
// be destroyed
void handleRequest0 ( UdpSlot *slot , int32_t netnice ) {
// if niceness is 0, use the higher priority udpServer
UdpServer *us = &g_udpServer;
//if ( netnice == 0 ) us = &g_udpServer2;
// get the request
char *request = slot->m_readBuf;
int32_t requestSize = slot->m_readBufSize;
// collection is now stored in the request, so i commented this out
//if ( requestSize != MSG0_REQ_SIZE ) {
// log("net: Received bad data request size of %"INT32" bytes. "
// "Should be %"INT32".", requestSize ,(int32_t)MSG0_REQ_SIZE);
// us->sendErrorReply ( slot , EBADREQUESTSIZE );
// return;
//}
// parse the request
char *p = request;
int64_t syncPoint = *(int64_t *)p ; p += 8;
//key_t startKey = *(key_t *)p ; p += sizeof(key_t);
//key_t endKey = *(key_t *)p ; p += sizeof(key_t);
int32_t minRecSizes = *(int32_t *)p ; p += 4;
int32_t startFileNum = *(int32_t *)p ; p += 4;
int32_t numFiles = *(int32_t *)p ; p += 4;
int32_t maxCacheAge = *(int32_t *)p ; p += 4;
char rdbId = *p++;
char addToCache = *p++;
char doErrorCorrection = *p++;
char includeTree = *p++;
// this was messing up our niceness conversion logic
int32_t niceness = slot->m_niceness;//(int32_t)(*p++);
// still need to skip it though!
p++;
bool allowPageCache = (bool)(*p++);
char ks = getKeySizeFromRdbId ( rdbId );
char *startKey = p; p+=ks;
char *endKey = p; p+=ks;
// then null terminated collection
//char *coll = p;
collnum_t collnum = *(collnum_t *)p; p += sizeof(collnum_t);
CollectionRec *xcr = g_collectiondb.getRec ( collnum );
if ( ! xcr ) g_errno = ENOCOLLREC;
// error set from XmlDoc::cacheTermLists()?
if ( g_errno ) {
us->sendErrorReply ( slot , EBADRDBID ); return;}
// is this being called from callWaitingHandlers()
//bool isRecall = (netnice == 99);
// . get the rdb we need to get the RdbList from
// . returns NULL and sets g_errno on error
//Msg0 msg0;
//Rdb *rdb = msg0.getRdb ( rdbId );
Rdb *rdb = getRdbFromId ( rdbId );
if ( ! rdb ) {
us->sendErrorReply ( slot , EBADRDBID ); return;}
// keep track of stats
rdb->readRequestGet ( requestSize );
/*
// keep track of stats
if ( ! isRecall ) rdb->readRequestGet ( requestSize );
int64_t singleDocId2 = 0LL;
if ( rdbId == RDB_POSDB && maxCacheAge ) {
int64_t d1 = g_posdb.getDocId(startKey);
int64_t d2 = g_posdb.getDocId(endKey);
if ( d1+1 == d2 ) singleDocId2 = d1;
}
// have we parsed this docid and cached its termlists?
bool shouldBeCached2 = false;
if ( singleDocId2 &&
isDocIdInTermListCache ( singleDocId2 , coll ) )
shouldBeCached2 = true;
// if in the termlist cache, send it back right away
char *trec;
int32_t trecSize;
if ( singleDocId2 &&
getRecFromTermListCache(coll,
startKey,
endKey,
maxCacheAge,
&trec,
&trecSize) ) {
// if in cache send it back!
us->sendReply_ass(trec,trecSize,trec,trecSize,slot);
return;
}
// if should be cached but was not found then it's probably a
// synonym form not in the doc content. make an empty list then.
if ( shouldBeCached2 ) {
// send back an empty termlist
us->sendReply_ass(NULL,0,NULL,0,slot);
return;
}
// MUST be in termlist cache! if not in there it is a probably
// a synonym term termlist of a word in the doc.
if ( isRecall ) {
// send back an empty termlist
us->sendReply_ass(NULL,0,NULL,0,slot);
return;
}
// init waiting table?
static bool s_waitInit = false;
if ( ! s_waitInit ) {
// do not repeat
s_waitInit = true;
// niceness = 0
if ( ! g_waitingTable.set(8,4,2048,NULL,0,true,0,"m5wtbl")){
log("msg5: failed to init waiting table");
// error kills us!
us->sendErrorReply ( slot , EBADRDBID );
return;
}
}
// wait in waiting table?
if ( singleDocId2 && g_waitingTable.isInTable ( &singleDocId2 ) ) {
g_waitingTable.addKey ( &singleDocId2 , &slot );
return;
}
// if it's for a special gbdocid: query then cache ALL termlists
// for this docid into g_termListCache right now
if ( singleDocId2 ) {
// have all further incoming requests for this docid
// wait in the waiting table
g_waitingTable.addKey ( &singleDocId2 , &slot );
// load the title rec and store its posdb termlists in cache
XmlDoc *xd;
try { xd = new ( XmlDoc ); }
catch ( ... ) {
g_errno = ENOMEM;
us->sendErrorReply ( slot , g_errno );
return;
}
mnew ( xd, sizeof(XmlDoc),"msg0xd");
// always use niceness 1 now even though we use niceness 0
// to make the cache hits fast
//niceness = 1;
// . load the old title rec first and just recycle all
// . typically there might be a few hundred related docids
// each with 50,000 matching queries on average to evaluate
// with the gbdocid:xxxx| restriction?
if ( ! xd->set3 ( singleDocId2 , coll , niceness ) ) {
us->sendErrorReply ( slot , g_errno ); return;}
// init the new xmldoc
xd->m_callback1 = callWaitingHandlers;
xd->m_state = xd;
// . if this blocks then return
// . should call loadOldTitleRec() and get JUST the posdb recs
// by setting m_useTitledb, etc. to false. then it should
// make posdb termlists with the compression using
// RdbList::addRecord() and add those lists to
// g_termListCache
if ( ! xd->cacheTermLists ( ) ) return;
// otherwise, it completed right away!
callWaitingHandlers ( xd );
return;
}
*/
/*
// init special sectiondb cache?
if ( rdbId == RDB_SECTIONDB && ! s_initCache ) {
// try to init cache
if ( ! s_sectiondbCache.init ( 20000000 , // 20MB max mem
-1 , // fixed data size
false , // support lists?
20000 , // 20k max recs
false , // use half keys?
"secdbche", // dbname
false, // load from disk?
sizeof(key128_t), //cachekeysize
0 , // data key size
20000 )) // numPtrs max
log("msg0: failed to init sectiondb cache: %s",
mstrerror(g_errno));
else
s_initCache = true;
}
// check the sectiondb cache
if ( rdbId == RDB_SECTIONDB ) {
//int64_t sh48 = g_datedb.getTermId((key128_t *)startKey);
// use the start key now!!!
char *data;
int32_t dataSize;
if (s_sectiondbCache.getRecord ( coll,
startKey,//&sh48,
&data,
&dataSize,
true, // docopy?
600, // maxage (10 mins)
true, // inc counts?
NULL, // cachedtime
true // promoteRec?
)){
// debug
//log("msg0: got sectiondblist in cache datasize=%"INT32"",
// dataSize);
// send that back
g_udpServer.sendReply_ass ( data ,
dataSize ,
data ,
dataSize ,
slot ,
60 ,
NULL ,
doneSending_ass ,
-1 ,
-1 ,
true );
return;
}
}
*/
// . do a local get
// . create a msg5 to get the list
State00 *st0 ;
try { st0 = new (State00); }
catch ( ... ) {
g_errno = ENOMEM;
log("Msg0: new(%"INT32"): %s",
(int32_t)sizeof(State00),mstrerror(g_errno));
us->sendErrorReply ( slot , g_errno );
return;
}
mnew ( st0 , sizeof(State00) , "State00" );
// timing debug
if ( g_conf.m_logTimingNet )
st0->m_startTime = gettimeofdayInMilliseconds();
// save slot in state
st0->m_slot = slot;
// save udp server to send back reply on
st0->m_us = us;
// init this one
st0->m_niceness = niceness;
st0->m_rdbId = rdbId;
QUICKPOLL(niceness);
// debug msg
if ( maxCacheAge != 0 && ! addToCache )
log(LOG_LOGIC,"net: msg0: check but don't add... rdbid=%"INT32".",
(int32_t)rdbId);
// . if this request came over on the high priority udp server
// make sure the priority gets passed along
// . return if this blocks
// . we'll call sendReply later
if ( ! st0->m_msg5.getList ( rdbId ,
collnum ,
&st0->m_list ,
startKey ,
endKey ,
minRecSizes ,
includeTree , // include tree?
addToCache , // addToCache?
maxCacheAge ,
startFileNum ,
numFiles ,
st0 ,
gotListWrapper ,
niceness ,
doErrorCorrection ,
NULL , // cacheKeyPtr
0 , // retryNum
2 , // maxRetries
true , // compensateForMerge
syncPoint ,
NULL,//&st0->m_msg5b ,
false,
allowPageCache ) )
return;
// call wrapper ouselves
gotListWrapper ( st0 , NULL , NULL );
}
// . slot should be auto-nuked upon transmission or error
// . TODO: ensure if this sendReply() fails does it really nuke the slot?
void gotListWrapper ( void *state , RdbList *listb , Msg5 *msg5xx ) {
// get the state
State00 *st0 = (State00 *)state;
// extract the udp slot and list and msg5
UdpSlot *slot = st0->m_slot;
RdbList *list = &st0->m_list;
Msg5 *msg5 = &st0->m_msg5;
UdpServer *us = st0->m_us;
// sanity check -- ensure they match
//if ( niceness != st0->m_niceness )
// log("Msg0: niceness mismatch");
// debug msg
//if ( niceness != 0 )
// log("HEY! niceness is not 0");
// timing debug
if ( g_conf.m_logTimingNet || g_conf.m_logDebugNet ) {
//log("Msg0:hndled request %"UINT64"",gettimeofdayInMilliseconds());
int32_t size = -1;
if ( list ) size = list->getListSize();
log(LOG_TIMING|LOG_DEBUG,
"net: msg0: Handled request for data. "
"Now sending data termId=%"UINT64" size=%"INT32""
" transId=%"INT32" ip=%s port=%i took=%"INT64" "
"(niceness=%"INT32").",
g_posdb.getTermId(msg5->m_startKey),
size,slot->m_transId,
iptoa(slot->m_ip),slot->m_port,
gettimeofdayInMilliseconds() - st0->m_startTime ,
st0->m_niceness );
}
// debug
//if ( ! msg5->m_includeTree )
// log("hotit\n");
// on error nuke the list and it's data
if ( g_errno ) {
mdelete ( st0 , sizeof(State00) , "Msg0" );
delete (st0);
// TODO: free "slot" if this send fails
us->sendErrorReply ( slot , g_errno );
return;
}
QUICKPOLL(st0->m_niceness);
// point to the serialized list in "list"
char *data = list->getList();
int32_t dataSize = list->getListSize();
char *alloc = list->getAlloc();
int32_t allocSize = list->getAllocSize();
// tell list not to free the data since it is a reply so UdpServer
// will free it when it destroys the slot
list->setOwnData ( false );
// keep track of stats
Rdb *rdb = getRdbFromId ( st0->m_rdbId );
if ( rdb ) rdb->sentReplyGet ( dataSize );
// TODO: can we free any memory here???
// keep track of how long it takes to complete the send
st0->m_startTime = gettimeofdayInMilliseconds();
// debug point
int32_t oldSize = msg5->m_minRecSizes;
int32_t newSize = msg5->m_minRecSizes + 20;
// watch for wrap around
if ( newSize < oldSize ) newSize = 0x7fffffff;
if ( dataSize > newSize && list->getFixedDataSize() == 0 &&
// do not annoy me with these linkdb msgs
dataSize > newSize+100 )
log(LOG_LOGIC,"net: msg0: Sending more data than what was "
"requested. Ineffcient. Bad engineer. dataSize=%"INT32" "
"minRecSizes=%"INT32".",dataSize,oldSize);
/*
// always compress these lists
if ( st0->m_rdbId == RDB_SECTIONDB ) { // && 1 == 3) {
// get sh48, the sitehash
key128_t *startKey = (key128_t *)msg5->m_startKey ;
int64_t sh48 = g_datedb.getTermId(startKey);
// debug
//log("msg0: got sectiondblist from disk listsize=%"INT32"",
// list->getListSize());
if ( dataSize > 50000 )
log("msg0: sending back list rdb=%"INT32" "
"listsize=%"INT32" sh48=0x%"XINT64"",
(int32_t)st0->m_rdbId,
dataSize,
sh48);
// save it
int32_t origDataSize = dataSize;
// store compressed list on itself
char *dst = list->m_list;
// warn if niceness is 0!
if ( st0->m_niceness == 0 )
log("msg0: compressing sectiondb list at niceness 0!");
// compress the list
uint32_t lastVoteHash32 = 0LL;
SectionVote *lastVote = NULL;
for ( ; ! list->isExhausted() ; list->skipCurrentRecord() ) {
// breathe
QUICKPOLL ( st0->m_niceness );
// get rec
char *rec = list->getCurrentRec();
// for ehre
key128_t *key = (key128_t *)rec;
// the score is the bit which is was set in
// Section::m_flags for that docid
int32_t secType = g_indexdb.getScore ( (char *)key );
// 0 means it probably used to count # of voters
// from this site, so i don't think xmldoc uses
// that any more
if ( secType == SV_SITE_VOTER ) continue;
// treat key like a datedb key and get the taghash
uint32_t h32 = g_datedb.getDate ( key );
// get data/vote from the current record in the
// sectiondb list
SectionVote *sv=(SectionVote *)list->getCurrentData ();
// get the average score for this doc
float avg = sv->m_score ;
if ( sv->m_numSampled > 0.0 ) avg /= sv->m_numSampled;
// if same as last guy, add to it
if ( lastVoteHash32 == h32 && lastVote ) {
// turn possible multi-vote into single docid
// into a single vote, with the score averaged.
lastVote->m_score += avg;
lastVote->m_numSampled++;
continue;
}
// otherwise, add in a new guy!
*(key128_t *)dst = *key;
dst += sizeof(key128_t);
// the new vote
SectionVote *dsv = (SectionVote *)dst;
dsv->m_score = avg;
dsv->m_numSampled = 1;
// set this
lastVote = dsv;
lastVoteHash32 = h32;
// skip over
dst += sizeof(SectionVote);
}
// update the list size now for sending back
dataSize = dst - data;
// if the list was over the requested minrecsizes we need
// to set a flag so that the caller will do a re-call.
// so making the entire odd, will be the flag.
if ( origDataSize > msg5->m_minRecSizes &&
dataSize < origDataSize ) {
*dst++ = '\0';
dataSize++;
}
// debug
//log("msg0: compressed sectiondblist from disk "
// "newlistsize=%"INT32"", dataSize);
// use this timestamp
int32_t now = getTimeLocal();//Global();
// finally, cache this sucker
s_sectiondbCache.addRecord ( msg5->m_coll,
(char *)startKey,//(char *)&sh48
data,
dataSize ,
now );
// ignore errors
g_errno = 0;
}
*/
//
// for linkdb lists, remove all the keys that have the same IP32
// and store a count of what we removed somewhere
//
if ( st0->m_rdbId == RDB_LINKDB ) {
// store compressed list on itself
char *dst = list->m_list;
// keep stats
int32_t totalOrigLinks = 0;
int32_t ipDups = 0;
int32_t lastIp32 = 0;
char *listEnd = list->getListEnd();
// compress the list
for ( ; ! list->isExhausted() ; list->skipCurrentRecord() ) {
// breathe
QUICKPOLL ( st0->m_niceness );
// count it
totalOrigLinks++;
// get rec
char *rec = list->getCurrentRec();
int32_t ip32 = g_linkdb.getLinkerIp_uk((key224_t *)rec );
// same as one before?
if ( ip32 == lastIp32 &&
// are we the last rec? include that for
// advancing the m_nextKey in Linkdb more
// efficiently.
rec + LDBKS < listEnd ) {
ipDups++;
continue;
}
// store it
gbmemcpy (dst , rec , LDBKS );
dst += LDBKS;
// update it
lastIp32 = ip32;
}
// . if we removed one key, store the stats
// . caller should recognize reply is not a multiple of
// the linkdb key size LDBKS and no its there!
if ( ipDups ) {
//*(int32_t *)dst = totalOrigLinks;
//dst += 4;
//*(int32_t *)dst = ipDups;
//dst += 4;
}
// update list parms
list->m_listSize = dst - list->m_list;
list->m_listEnd = list->m_list + list->m_listSize;
data = list->getList();
dataSize = list->getListSize();
}
//log("sending replySize=%"INT32" min=%"INT32"",dataSize,msg5->m_minRecSizes);
// . TODO: dataSize may not equal list->getListMaxSize() so
// Mem class may show an imblanace
// . now g_udpServer is responsible for freeing data/dataSize
// . the "true" means to call doneSending_ass() from the signal handler
// if need be
st0->m_us->sendReply_ass ( data ,
dataSize ,
alloc , // alloc
allocSize , // alloc size
slot ,
60 ,
st0 ,
doneSending_ass ,
-1 ,
-1 ,
true );
}
void Syncdb::syncStart_r ( bool amThread ) {
// turn this off
g_process.m_suspendAutoSave = true;
char cmd[1024];
// get synchost best ip
char *ips = iptoa ( g_hostdb.getAliveIp ( g_hostdb.m_syncHost ) );
// his dir
char *dir = g_hostdb.m_syncHost->m_dir;
// use
Host *me = g_hostdb.m_myHost;
// ours
char *mydir = me->m_dir;
// generic
long err;
// loop over every rdb and every data and map file in each rdb
for ( long i = 0 ; i < RDB_END ; i++ ) {
// skip SYNCDB
if ( i == RDB_SYNCDB ) continue;
// get that rdb
Rdb *rdb = getRdbFromId ( i );
// skip if none
if ( ! rdb ) continue;
// get coll
for ( long j = 0 ; j < rdb->getNumBases() ; j++ ) {
// get that base
RdbBase *base = rdb->getBase(j);//m_bases[j];
if ( ! base ) continue;
// get coll
char *coll = base->m_coll;
// and num
long collnum = base->m_collnum;
// make the dir
sprintf ( cmd , "ssh %s 'mkdir %scoll.%s.%li'",
ips,dir,coll,collnum);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
//int err = my_system_r ( cmd, 3600*24 );
//if ( err != 0 ) goto hadError;
// copy the files
for ( long k = 0 ; k < base->m_numFiles ; k++ ) {
// sleep while dumping. we are in a thread.
if ( base->isDumping() ) sleep ( 1 );
// get map
RdbMap *map = base->m_maps[k];
// copy the map file
sprintf ( cmd , "rcp %s %s:%scoll.%s.%li/'",
map->getFilename(),ips,dir,coll,collnum);
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
// get the file
BigFile *f = base->m_files[k];
// loop over each little part file
for ( long m = 0 ; m < f->m_numParts ; m++ ) {
// get part file
File *p = f->m_files[m];
// copy that
sprintf ( cmd , "rcp %s %s:%scoll.%s.%li/'",
p->m_filename,ips,dir,coll,collnum);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
}
}
}
}
// make the dirs
sprintf ( cmd , "ssh %s '"
"mkdir %s/dict/ ;"
"mkdir %s/dict/en/ ;"
"mkdir %s/ucdata/ ;"
"mkdir %s/.antiword/ ;"
"'" ,
ips,
dir,
dir,
dir,
dir
);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
// loop over the files in Process.cpp
for ( long i = 0 ; i < 99999 ; i++ ) {
// null means end
if ( ! g_files[i] ) break;
sprintf ( cmd , "rcp %s%s %s:%s",
mydir,g_files[i],ips,dir);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
}
// new guy is NOT in sync
sprintf ( cmd , "ssh %s 'echo 0 > %sinsync.dat", ips,dir);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
// saved files
sprintf ( cmd , "rcp %s*-saved.dat %s:%sinsync.dat",
mydir,ips,dir);
// excecute
log ( LOG_INFO, "sync: %s", cmd );
if ( ( err = my_system_r ( cmd, 3600*24 ) ) ) goto hadError;
// completed!
return;
hadError:
log ( "sync: Call to system(\"%s\") had error %s.",cmd,strerror(err));
g_hostdb.m_syncHost->m_doingSync = 0;
g_hostdb.m_syncHost = NULL;
return;
}
// . destroys the slot if false is returned
// . this is registered in Msg1::set() to handle add rdb record msgs
// . seems like we should always send back a reply so we don't leave the
// requester's slot hanging, unless he can kill it after transmit success???
// . TODO: need we send a reply back on success????
// . NOTE: Must always call g_udpServer::sendReply or sendErrorReply() so
// read/send bufs can be freed
void handleRequest1 ( UdpSlot *slot , int32_t netnice ) {
// extract what we read
char *readBuf = slot->m_readBuf;
int32_t readBufSize = slot->m_readBufSize;
int32_t niceness = slot->m_niceness;
// select udp server based on niceness
UdpServer *us = &g_udpServer;
// must at least have an rdbId
if ( readBufSize <= 4 ) {
g_errno = EREQUESTTOOSHORT;
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply. Request too short", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot , g_errno );
return;
}
char *p = readBuf;
char *pend = readBuf + readBufSize;
// extract rdbId
char rdbId = *p++;
// get the rdb to which it belongs, use Msg0::getRdb()
Rdb *rdb = getRdbFromId ( (char) rdbId );
if ( ! rdb ) {
log(LOG_ERROR,"%s:%s:%d: call sendErrorReply. Bad rdbid", __FILE__, __func__, __LINE__);
us->sendErrorReply ( slot, EBADRDBID );
return;
}
// keep track of stats
rdb->readRequestAdd ( readBufSize );
// reset g_errno
g_errno = 0;
// are we injecting some title recs?
bool injecting;
if ( *p & 0x80 ) injecting = true;
else injecting = false;
p++;
// then collection
//char *coll = p;
//p += strlen (p) + 1;
collnum_t collnum = *(collnum_t *)p;
p += sizeof(collnum_t);
// . make a list from this data
// . skip over the first 4 bytes which is the rdbId
// . TODO: embed the rdbId in the msgtype or something...
RdbList list;
// set the list
list.set ( p , // readBuf + 4 ,
pend - p , // readBufSize - 4 ,
p , // readBuf + 4 ,
pend - p , // readBufSize - 4 ,
rdb->getFixedDataSize() ,
false , // ownData?
rdb->useHalfKeys() ,
rdb->getKeySize () );
// note it
//log("msg1: handlerequest1 calling addlist niceness=%" PRId32,niceness);
//log("msg1: handleRequest1 niceness=%" PRId32,niceness);
// this returns false and sets g_errno on error
rdb->addList ( collnum , &list , niceness);
// if titledb, add tfndb recs to map the title recs
//if ( ! g_errno && rdb == g_titledb.getRdb() && injecting )
// updateTfndb ( coll , &list , true, 0);
// but if deleting a "new" and unforced record from spiderdb
// then only delete tfndb record if it was tfn=255
//if ( ! g_errno && rdb == g_spiderdb.getRdb() )
// updateTfndb2 ( coll , &list , false );
// retry on some errors
addedList ( slot , rdb );
}
// . return false if blocked, true otherwise
// . sets g_errno on error
bool Msg1::sendData ( unsigned long shardNum, char *listData , long listSize) {
// debug msg
//log("sendData: mcast=%lu listSize=%li",
// (long)&m_mcast,(long)listSize);
// bail if this is an interface machine, don't write to the main
if ( g_conf.m_interfaceMachine ) return true;
// return true if no data
if ( listSize == 0 ) return true;
// how many hosts in this group
//long numHosts = g_hostdb.getNumHostsPerShard();
// . NOTE: for now i'm removing this until I handle ETRYAGAIN errors
// properly... by waiting and retrying...
// . if this is local data just for us just do an addList to OUR rdb
/*
if ( groupId == g_hostdb.m_groupId && numHosts == 1 ) {
// this sets g_errno on error
Msg0 msg0;
Rdb *rdb = msg0.getRdb ( (char) m_rdbId );
if ( ! rdb ) return true;
// make a list from this data
RdbList list;
list.set (listData,listSize,listSize,rdb->getFixedDataSize(),
false) ; // ownData?
// this returns false and sets g_errno on error
rdb->addList ( &list );
// . if we got a ETRYAGAIN cuz the buffer we add to was full
// then we should sleep and try again!
// . return false cuz this blocks for a period of time
// before trying again
if ( g_errno == ETRYAGAIN ) {
// try adding again in 1 second
registerSleepCallback ( 1000, slot, tryAgainWrapper1 );
// return now
return false;
}
// . always return true cuz we did not block
// . g_errno may be set
return true;
}
*/
// if the data is being added to our group, don't send ourselves
// a msg1, if we can add it right now
bool sendToSelf = true;
if ( shardNum == getMyShardNum() &&
! g_conf.m_interfaceMachine ) {
// get the rdb to which it belongs, use Msg0::getRdb()
Rdb *rdb = getRdbFromId ( (char) m_rdbId );
if ( ! rdb ) goto skip;
// key size
long ks = getKeySizeFromRdbId ( m_rdbId );
// reset g_errno
g_errno = 0;
// . make a list from this data
// . skip over the first 4 bytes which is the rdbId
// . TODO: embed the rdbId in the msgtype or something...
RdbList list;
// set the list
list.set ( listData ,
listSize ,
listData ,
listSize ,
rdb->getFixedDataSize() ,
false , // ownData?
rdb->useHalfKeys() ,
ks );
// note that
//log("msg1: local addlist niceness=%li",m_niceness);
// this returns false and sets g_errno on error
rdb->addList ( m_coll , &list , m_niceness );
// if titledb, add tfndb recs to map the title recs
//if ( ! g_errno && rdb == g_titledb.getRdb() && m_injecting )
// // this returns false and sets g_errno on error
// updateTfndb ( m_coll , &list , true , m_niceness);
// if no error, no need to use a Msg1 UdpSlot for ourselves
if ( ! g_errno ) sendToSelf = false;
else {
log("rdb: msg1 had error: %s",mstrerror(g_errno));
// this is messing up generate catdb's huge rdblist add
// why did we put it in there??? from msg9b.cpp
//return true;
}
QUICKPOLL(m_niceness);
// if we're the only one in the group, bail, we're done
if ( ! sendToSelf &&
g_hostdb.getNumHostsPerShard() == 1 ) return true;
}
skip:
// . make an add record request to multicast to a bunch of machines
// . this will alloc new space, returns NULL on failure
//char *request = makeRequest ( listData, listSize, groupId ,
//m_rdbId , &requestLen );
long collLen = gbstrlen ( m_coll );
// . returns NULL and sets g_errno on error
// . calculate total size of the record
// . 1 byte for rdbId, 1 byte for flags,
// then collection NULL terminated, then list
long requestLen = 1 + 1 + collLen + 1 + listSize ;
// make the request
char *request = (char *) mmalloc ( requestLen ,"Msg1" );
if ( ! request ) return true;
char *p = request;
// store the rdbId at top of request
*p++ = m_rdbId;
// then the flags
*p = 0;
if ( m_injecting ) *p |= 0x80;
p++;
// then collection name
memcpy ( p , m_coll , collLen );
p += collLen;
*p++ = '\0';
// sanity check
if ( collLen <= 0 ) {
log(LOG_LOGIC,"net: No collection specified for list add.");
//char *xx = NULL; *xx = 0;
g_errno = ENOCOLLREC;
return true;
}
//if ( m_deleteRecs ) request[1] |= 0x80;
//if ( m_overwriteRecs ) request[1] |= 0x40;
// store the list after coll
memcpy ( p , listData , listSize );
QUICKPOLL(m_niceness);
// debug msg
//if ( ! m_waitForReply ) // (m_rdbId == RDB_SPIDERDB ||
//m_rdbId == RDB_TFNDB) )
// // if we don't get here we lose it!!!!!!!!!!!!!!!!!!!!!
// log("using mcast=%lu rdbId=%li listData=%lu listSize=%lu "
// "gid=%lu",
// (long)&m_mcast,(long)m_rdbId,(long)listData,(long)listSize,
// groupId);
// for small packets
//long niceness = 2;
//if ( requestLen < TMPBUFSIZE - 32 ) niceness = 0;
//log("msg1: sending mcast niceness=%li",m_niceness);
// . multicast to all hosts in group "groupId"
// . multicast::send() returns false and sets g_errno on error
// . we return false if we block, true otherwise
// . will loop indefinitely if a host in this group is down
key_t k; k.setMin();
if ( m_mcast.send ( request , // sets mcast->m_msg to this
requestLen , // sets mcast->m_msgLen to this
0x01 , // msgType for add rdb record
true , // does multicast own msg?
shardNum , // group to send to (groupKey)
true , // send to whole group?
0 , // key is useless for us
this , // state data
NULL , // state data
gotReplyWrapper1 ,
60 , // timeout in secs
m_niceness , // niceness
false , // realtime
-1 , // first host to try
NULL , // replyBuf = NULL ,
0 , // replyBufMaxSize = 0 ,
true , // freeReplyBuf = true ,
false , // doDiskLoadBalancing = false ,
-1 , // no max cache age limit
//(key_t)0 , // cache key
k , // cache key
RDB_NONE , // bogus rdbId
-1 , // unknown minRecSizes read size
sendToSelf ))
return false;
QUICKPOLL(m_niceness);
// g_errno should be set
log("net: Had error when sending request to add data to %s in shard "
"#%lu: %s.", getDbnameFromId(m_rdbId),shardNum,mstrerror(g_errno));
return true;
}
