Exemplo n.º 1
0
errlHndl_t main( ATTENTION_VALUE_TYPE i_attentionType,
                 const AttnList & i_attnList )
{
    PRDF_ENTER( "PRDF::main() Global attnType=%04X", i_attentionType );

    // will unlock when going out of scope
    PRDF_SYSTEM_SCOPELOCK;

    g_prd_errlHndl = NULL;

    uint32_t rc =  SUCCESS;
    // clears all the chips saved to stack during last analysis
    ServiceDataCollector::clearChipStack();

    if(( g_initialized == false)&&(NULL ==systemPtr))
    {
        g_prd_errlHndl = noLock_initialize();
        if(g_prd_errlHndl != NULL) rc = PRD_NOT_INITIALIZED;
    }

    ServiceDataCollector serviceData;
    STEP_CODE_DATA_STRUCT sdc;
    sdc.service_data = &serviceData;
    SYSTEM_DEBUG_CLASS sysdebug;

    sysdebug.Reinitialize(i_attnList); //Refresh sysdebug with latest Attn data

    ////////////////////////////////////////////////////////////////////////////
    // Normalize global attn type (ie 11,12,13,....) to (CHECKSTOP, RECOVERED,
    // SPECIAL..)
    ////////////////////////////////////////////////////////////////////////////

    if ( i_attentionType == INVALID_ATTENTION_TYPE ||
         i_attentionType >= END_ATTENTION_TYPE )
    {
        rc = PRD_INVALID_ATTENTION_TYPE;
        PRDF_ERR( "PrdMain: Invalid attention type! Global:%x",
                  i_attentionType );
        i_attentionType = RECOVERABLE; // This will prevent RAS service problems
    }

    // link to the right service Generator
    ServiceGeneratorClass & serviceGenerator =
        ServiceGeneratorClass::ThisServiceGenerator();

    // Initialize the SDC error log. Required for GenerateSrcPfa() call below.
    serviceGenerator.createInitialErrl( i_attentionType );

    // check for something wrong
    if ( g_initialized == false || rc != SUCCESS || systemPtr == NULL )
    {
        if(rc == SUCCESS)
        {
            rc = PRD_NOT_INITIALIZED;
        }
        PRDF_ERR("PrdMain: PRD failed. RC=%x",rc );
        // we are not going to do an analysis - so fill out the Service Data
        (serviceData.GetErrorSignature())->setSigId(rc);
        serviceData.SetCallout(SP_CODE);
        serviceData.SetThresholdMaskId(0); // Sets AT_THRESHOLD, DEGRADED,
                                           // SERVICE_CALL
    }
    else  // do the analysis
    {
        // flush Cache so that SCR reads access hardware
        RegDataCache::getCachedRegisters().flush();

        serviceData.SetAttentionType(i_attentionType);

        // capture time of day
        serviceGenerator.SetErrorTod( i_attentionType, serviceData );

        if(serviceGenerator.QueryLoggingBufferFull())
        {
            serviceData.SetFlooding();
        }

        int32_t analyzeRc = systemPtr->Analyze(sdc, i_attentionType);
        // flush Cache to free up the memory
        RegDataCache::getCachedRegisters().flush();
        ScanFacility      & l_scanFac = ScanFacility::Access();
        //delete all the wrapper register objects since these were created
        //just for plugin code
        l_scanFac.ResetPluginRegister();
        SystemSpecific::postAnalysisWorkarounds(sdc);
        if(analyzeRc != SUCCESS && g_prd_errlHndl == NULL)
        {
            // We have a bad RC, but no error log - Fill out SDC and have
            // service generator make one
            (serviceData.GetErrorSignature())->setErrCode(
                                                    (uint16_t)analyzeRc );
            serviceData.SetCallout(SP_CODE);
            serviceData.SetServiceCall();
            // We don't want to gard unless we have a good
            // return code
            serviceData.Gard(GardAction::NoGard);
        }
    }

    if(g_prd_errlHndl != NULL)
    {
        PRDF_INF("PRDTRACE: PrdMain: g_prd_errlHndl != NULL");
        PRDF_ADD_PROCEDURE_CALLOUT( g_prd_errlHndl, SRCI_PRIORITY_MED,
                                    EPUB_PRC_SP_CODE );

        // This forces any previous errls to be committed
        g_prd_errlHndl = NULL;

        // pw 597903 -- Don't GARD if we got a global error.
        serviceData.Gard(GardAction::NoGard);
    }

    g_prd_errlHndl = serviceGenerator.GenerateSrcPfa( i_attentionType,
                                                      serviceData );

    // Sleep for 20msec to let attention lines settle if we are at threshold.
    if ( (g_prd_errlHndl == NULL) && serviceData.IsAtThreshold() )
    {
        PlatServices::milliSleep( 0, 20 );
    }

    RasServices::SetTerminateOnCheckstop(true);

    PRDF_EXIT( "PRDF::main()" );

    return(g_prd_errlHndl.release());
}
Exemplo n.º 2
0
errlHndl_t main( ATTENTION_VALUE_TYPE i_attentionType,
                 const AttnList & i_attnList )
{
    PRDF_ENTER( "PRDF::main() Global attnType=%04X", i_attentionType );

    // These have to be outside of system scope lock
    errlHndl_t retErrl = NULL;
    bool initiateHwudump = false;
    TARGETING::TargetHandle_t dumpTrgt = NULL;
    errlHndl_t dumpErrl = NULL;
    uint32_t dumpErrlActions = 0;

    { // system scope lock starts ------------------------------------------

    // will unlock when going out of scope
    PRDF_SYSTEM_SCOPELOCK;

    g_prd_errlHndl = NULL;

    uint32_t rc =  SUCCESS;
    // clears all the chips saved to stack during last analysis
    ServiceDataCollector::clearChipStack();

    if(( g_initialized == false)&&(NULL ==systemPtr))
    {
        g_prd_errlHndl = noLock_initialize();
        if(g_prd_errlHndl != NULL) rc = PRD_NOT_INITIALIZED;
    }

    ServiceDataCollector serviceData;
    STEP_CODE_DATA_STRUCT sdc;
    sdc.service_data = &serviceData;
    SYSTEM_DEBUG_CLASS sysdebug;

    sysdebug.Reinitialize(i_attnList); //Refresh sysdebug with latest Attn data

    ////////////////////////////////////////////////////////////////////////////
    // Normalize global attn type (ie 11,12,13,....) to (CHECKSTOP, RECOVERED,
    // SPECIAL..)
    ////////////////////////////////////////////////////////////////////////////

    if ( i_attentionType == INVALID_ATTENTION_TYPE ||
         i_attentionType >= END_ATTENTION_TYPE )
    {
        rc = PRD_INVALID_ATTENTION_TYPE;
        PRDF_ERR( "PrdMain: Invalid attention type! Global:%x",
                  i_attentionType );
        i_attentionType = RECOVERABLE; // This will prevent RAS service problems
    }

    // link to the right service Generator
    ServiceGeneratorClass & serviceGenerator =
        ServiceGeneratorClass::ThisServiceGenerator();

    // Initialize the SDC error log. Required for GenerateSrcPfa() call below.
    serviceGenerator.createInitialErrl( i_attentionType );

    // check for something wrong
    if ( g_initialized == false || rc != SUCCESS || systemPtr == NULL )
    {
        if(rc == SUCCESS)
        {
            rc = PRD_NOT_INITIALIZED;
        }
        PRDF_ERR("PrdMain: PRD failed. RC=%x",rc );
        // we are not going to do an analysis - so fill out the Service Data
        (serviceData.GetErrorSignature())->setSigId(rc);
        serviceData.SetCallout(SP_CODE);
        serviceData.SetCallout( NextLevelSupport_ENUM, MRU_LOW );
        serviceData.SetThresholdMaskId(0); // Sets AT_THRESHOLD, DEGRADED,
                                           // SERVICE_CALL
    }
    else  // do the analysis
    {
        // flush Cache so that SCR reads access hardware
        RegDataCache::getCachedRegisters().flush();

        serviceData.setPrimaryAttnType(i_attentionType);

        // Set the time in which PRD handled the error.
        Timer timeOfError;
        PlatServices::getCurrentTime( timeOfError );
        serviceData.SetTOE( timeOfError );

        ServiceDataCollector l_tempSdc = serviceData;
        l_tempSdc.setPrimaryPass();
        sdc.service_data = &l_tempSdc;

        int32_t analyzeRc = systemPtr->Analyze( sdc, i_attentionType );

        if( PRD_SCAN_COMM_REGISTER_ZERO == analyzeRc )
        {
            // So, the first pass has failed. Hence, there are no primary
            // bits set. We must start second pass to see if there are any
            //secondary bits set.
            sdc.service_data = &serviceData;

            #if !defined(__HOSTBOOT_MODULE) && !defined(__HOSTBOOT_RUNTIME)
            ForceSyncAnalysis( l_tempSdc ); // save SDC till end of primary pass
            #endif

            // starting the second pass
            PRDF_INF( "PRDF::main() No bits found set in first pass,"
                      " starting second pass" );
            sysdebug.initAttnPendingtatus( ); //for the second  pass

            if( l_tempSdc.isSecondaryErrFound() )
            {
                sdc.service_data->setSecondaryErrFlag();
            }

            analyzeRc = systemPtr->Analyze( sdc, i_attentionType );

            // merging capture data of primary pass with capture data of
            // secondary pass for better FFDC.
            serviceData.GetCaptureData().mergeData(
                                    l_tempSdc.GetCaptureData());

            #if !defined(__HOSTBOOT_MODULE) && !defined(__HOSTBOOT_RUNTIME)
            // save SDC till end of secondary pass
            ForceSyncAnalysis( serviceData );
            #endif
        }
        else
        {
            serviceData = l_tempSdc;
            sdc.service_data = &serviceData;
        }

        // flush Cache to free up the memory
        RegDataCache::getCachedRegisters().flush();
        ScanFacility      & l_scanFac = ScanFacility::Access();
        //delete all the wrapper register objects since these were created
        //just for plugin code
        l_scanFac.ResetPluginRegister();
        if(analyzeRc != SUCCESS && g_prd_errlHndl == NULL)
        {
            (serviceData.GetErrorSignature())->setErrCode(
                                                    (uint16_t)analyzeRc );
            serviceData.SetCallout(SP_CODE);
            serviceData.SetCallout( NextLevelSupport_ENUM, MRU_LOW );
            serviceData.SetServiceCall();
            // We don't want to gard unless we have a good
            // return code
            serviceData.Gard(GardAction::NoGard);
        }
    }

    if(g_prd_errlHndl != NULL)
    {
        PRDF_INF("PRDTRACE: PrdMain: g_prd_errlHndl != NULL");
        PRDF_ADD_PROCEDURE_CALLOUT( g_prd_errlHndl, SRCI_PRIORITY_MED,
                                    EPUB_PRC_SP_CODE );
        // This is a precautionary step. There is a possibilty that if
        // severity for g_prd_errlHndl is Predictve and there is only
        // EPUB_PRC_SP_CODE callout than it will be changed to tracing event.
        // So adding EPUB_PRC_LVL_SUPP to avoid this.
        PRDF_ADD_PROCEDURE_CALLOUT( g_prd_errlHndl, SRCI_PRIORITY_LOW,
                                    EPUB_PRC_LVL_SUPP );

        // This forces any previous errls to be committed
        g_prd_errlHndl = NULL;

        // pw 597903 -- Don't GARD if we got a global error.
        serviceData.Gard(GardAction::NoGard);
    }

    g_prd_errlHndl = serviceGenerator.GenerateSrcPfa( i_attentionType,
                                                      serviceData,
                                                      initiateHwudump,
                                                      dumpTrgt,
                                                      dumpErrl,
                                                      dumpErrlActions);

    // Sleep for 20msec to let attention lines settle if we are at threshold.
    if ( (g_prd_errlHndl == NULL) && serviceData.IsAtThreshold() )
    {
        PlatServices::milliSleep( 0, 20 );
    }

    retErrl = g_prd_errlHndl.release();

    } // system scope lock ends ------------------------------------------


    if ( true == initiateHwudump )
    {
        PlatServices::initiateUnitDump( dumpTrgt, dumpErrl, dumpErrlActions );
    }

    PRDF_EXIT( "PRDF::main()" );

    return retErrl;
}