Exemplo n.º 1
0
void sdError_P(const char* str) {
  cout << pstr("error: ");
  cout << pgm(str) << endl;
  if (card.errorCode()) {
    cout << pstr("SD error: ") << hex << int(card.errorCode());
    cout << ',' << int(card.errorData()) << dec << endl;
  }
  while (1);
}
Exemplo n.º 2
0
void error_P(const char* str) {
  PgmPrint("error: ");
  SerialPrintln_P(str);
  if (card.errorCode()) {
    PgmPrint("SD error: ");
    Serial.print(card.errorCode(), HEX);
    Serial.print(',');
    Serial.println(card.errorData(), HEX);
  }
  while(1);
}
Exemplo n.º 3
0
void error(const char* str)
{
  Serial.print("error: ");
  Serial.println(str);
  if (card.errorCode()) {
    Serial.print("SD error: ");
    Serial.print(card.errorCode(), HEX);
    Serial.print(',');
    Serial.println(card.errorData(), HEX);
  }
  while(1) {
    SPARK_WLAN_Loop();
  };
}
Exemplo n.º 4
0
// ----------------------------------------------------------------------------
//	Scan the SD card and open the volume
//	Set reg[STATUS] to FDC_ST_NOTREADY if no card present
// ----------------------------------------------------------------------------
void scanSD()
{
	if (!card.init(SPI_FULL_SPEED, SD_CHIP_SELECT_PIN))
	{
		Serial.print("Init failed, error:");
		Serial.println(card.errorCode());
		mb8877.reg[STATUS] = FDC_ST_NOTREADY;
		return;
	}

#ifdef SD_DEBUG
	Serial.print("\nCard type: ");
	switch(card.type()) {
		case SD_CARD_TYPE_SD1: Serial.println("SD1"); break;
		case SD_CARD_TYPE_SD2: Serial.println("SD2"); break;
		case SD_CARD_TYPE_SDHC: Serial.println("SDHC"); break;
		default: Serial.println("Unknown");
	}
#endif

	if (!volume.init(card)) {
#ifdef SD_DEBUG
		Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
#endif
		mb8877.reg[STATUS] = FDC_ST_NOTREADY;
		return;
	}

#ifdef SD_DEBUG
	// ----- Print the type and size of the first FAT-type volume
	Serial.print("\nVolume type is FAT");
	Serial.println(volume.fatType(), DEC);
	Serial.println();

	long volumesize;
	volumesize = volume.blocksPerCluster();    // clusters are collections of blocks
	volumesize *= volume.clusterCount();       // we'll have a lot of clusters
	volumesize *= 512;                            // SD card blocks are always 512 bytes
	Serial.print("Volume size (bytes): ");
	Serial.println(volumesize);
#endif
	root.openRoot(volume);
	mb8877.reg[STATUS]=0x00;
}