FileInfo*
PieView::_FileAt(const BPoint& where)
{
BRect b = Bounds();
float cx = b.left + b.Width() / 2.0;
float cy = b.top + b.Height() / 2.0;
float dx = where.x - cx;
float dy = where.y - cy;
float dist = sqrt(dx*dx + dy*dy);
int level;
if (dist < kPieCenterSize)
level = 0;
else
level = 1 + (int)((dist - kPieCenterSize) / kPieRingSize);
float angle = rad2deg(atan(dy / dx));
angle = ((dx < 0.0) ? 180.0 : (dy < 0.0) ? 0.0 : 360.0) - angle;
if (fMouseOverInfo.find(level) == fMouseOverInfo.end()) {
// No files in this level (ring) of the pie.
return NULL;
}
SegmentList s = fMouseOverInfo[level];
SegmentList::iterator i = s.begin();
while (i != s.end() && (angle < (*i).begin || (*i).end < angle))
i++;
if (i == s.end()) {
// Nothing at this angle.
return NULL;
}
return (*i).info;
}
static void
bufferLinesToLines( const GeoShape& input, double b, GeoShape& output )
{
// buffering lines turns them into polygons
for( GeoPartList::const_iterator i = input.getParts().begin(); i != input.getParts().end(); i++ )
{
const GeoPointList& part = *i;
if ( part.size() < 2 ) continue;
GeoPointList new_part;
// collect all the shifted segments:
SegmentList segments;
for( GeoPointList::const_iterator j = part.begin(); j != part.end()-1; j++ )
{
const osg::Vec3d& p0 = *j;
const osg::Vec3d& p1 = *(j+1);
osg::Vec3d d = p1-p0; d.normalize();
osg::Vec3d b0( p0.x() + b*d.y(), p0.y() - b*d.x(), p1.z() );
osg::Vec3d b1( p1.x() + b*d.y(), p1.y() - b*d.x(), p1.z() );
segments.push_back( Segment( b0, b1 ) );
}
// then intersect each pair of shifted segments to find the new verts:
for( SegmentList::iterator k = segments.begin(); k != segments.end()-1; k++ )
{
Segment& s0 = *k;
Segment& s1 = *(k+1); //(k+1) != segments.end()? *(k+1) : *segments.begin();
if ( k == segments.begin() )
{
GeoPoint first( s0.p0, part[0].getSRS() );
first.setDim( part[0].getDim() );
new_part.push_back( first );
}
osg::Vec3d isect;
if ( getLineIntersection( s0, s1, isect ) )
{
GeoPoint r( isect, part[0].getSRS() );
r.setDim( part[0].getDim() );
new_part.push_back( r );
}
if ( k == segments.end()-2 )
{
GeoPoint last( s1.p1, part[0].getSRS() );
last.setDim( part[0].getDim() );
new_part.push_back( last );
}
}
if ( new_part.size() > 1 )
output.getParts().push_back( new_part );
}
}
void QSegmentWidget::DrawSegments(QPainter *painter,
const SegmentList &s, qreal radius)
{
for (SegmentList::const_iterator i = s.begin(); i != s.end(); i++) {
painter->setRenderHint(QPainter::Antialiasing);
painter->setRenderHint(QPainter::SmoothPixmapTransform);
QBrush b(i->color);
painter->setBrush(b);
QBrush c(i->color.darker(200));
painter->setPen(QPen(c, 0));
int startAngle = qRound(i->first * 16.0);
qreal dAngle = i->second - i->first;
if (dAngle < 0.0)
dAngle += 360.0;
int spanAngle = qRound(dAngle * 16.0);
QRectF r(-radius, -radius, radius * 2.0, radius * 2.0);
if (spanAngle >= 360 * 16) {
// qDebug() << QString("DrawSegments drawEllipse (%1, %2)").arg(-radius).arg(radius * 2.0);
painter->drawEllipse(r);
} else {
// qDebug() << QString("DrawSegments drawPie (%1, %2, %3, %4)").arg(-radius).arg(radius * 2.0).arg(startAngle).arg(spanAngle);
painter->drawPie(r, startAngle, spanAngle);
}
}
}
static void
bufferPolygons( const GeoShape& shape, double b, GeoPartList& output )
{
for( GeoPartList::const_iterator i = shape.getParts().begin(); i != shape.getParts().end(); i++ )
{
const GeoPointList& part = *i;
if ( part.size() < 3 )
continue;
GeoPointList new_part;
// first build the buffered line segments:
SegmentList segments;
for( GeoPointList::const_iterator j = part.begin(); j != part.end(); j++ )
{
const osg::Vec3d& p0 = *j;
const osg::Vec3d& p1 = (j+1) != part.end()? *(j+1) : *part.begin();
osg::Vec3d d = p1-p0;
d.normalize();
osg::Vec3d b0( p0.x() + b*d.y(), p0.y() - b*d.x(), p1.z() );
osg::Vec3d b1( p1.x() + b*d.y(), p1.y() - b*d.x(), p1.z() );
segments.push_back( Segment( b0, b1 ) );
}
// then intersect each pair of segments to find the new verts:
for( SegmentList::iterator k = segments.begin(); k != segments.end(); k++ )
{
Segment& s0 = *k;
Segment& s1 = (k+1) != segments.end()? *(k+1) : *segments.begin();
osg::Vec3d isect;
if ( getLineIntersection( s0, s1, isect ) )
{
GeoPoint r( isect, part[0].getSRS() );
r.setDim( part[0].getDim() );
new_part.push_back( r );
}
}
if ( new_part.size() > 2 )
output.push_back( new_part );
}
}
void Tessellation::generateExtrusionContour()
{
for( auto& pos : positions )
extrusionContourVertices.push_back( pos );
extrusionContourIndices = segments;
SegmentList additionalSegments;
Vector n;
int originalSegments = extrusionContourIndices.size();
for( auto& segment : extrusionContourIndices )
{
auto& a = positions[ segment.i1 ];
auto& b = positions[ segment.i2 ];
n.x = (float)(a.y - b.y);
n.y = (float)(b.x - a.x);
n = n.normalized();
_assignNormal( n, segment, 0, additionalSegments );
_assignNormal( n, segment, 1, additionalSegments );
}
//add the created segments to the extrusion segments
extrusionContourIndices.insert( extrusionContourIndices.end(), additionalSegments.begin(), additionalSegments.end() );
}
void BlobImageProcessorYUV::processImage(/*const*/ Image &image) {
#else
void BlobImageProcessorYUV::processImage(const Image &image) {
#endif
blobs.clear();
int y;
BlobList activeblobs;
for (y=0; y<image.getHeight(); y++) { // for each row
SegmentList segments = getSegments(y, image); // find all the segments
for (SegmentList::iterator segment = segments.begin(); segment != segments.end(); ++segment) { // for each segment
BlobList::iterator mainblob = matchSegment(*segment, activeblobs.begin(), activeblobs.end());
if (mainblob != activeblobs.end()) { // if the segment matches a blob
mainblob->h = y - mainblob->y; // extend its height down to the current row
if (segment->start < mainblob->x) { // if the segment starts before the current blob
mainblob->w += mainblob->x - segment->start; // extend the current blob
mainblob->x = segment->start; // shift it to match the new segment
}
if (segment->end > mainblob->x + mainblob->w) // if the new segment ends after our current blob
mainblob->w = segment->end - mainblob->x; // extend the current blob
BlobList::iterator mergeblob = mainblob+1;
while ((mergeblob = matchSegment(*segment, mergeblob, activeblobs.end())) != activeblobs.end()) { // continue looking for more blobs
// if we match another blob
if (mainblob->x > mergeblob->x) { // and it starts before our current blob
mainblob->w += mainblob->x - mergeblob->x; // preserve our mergeblob's end point
mainblob->x = mergeblob->x; // move our current blob's start position
}
if (mainblob->x + mainblob->w < mergeblob->x + mergeblob->w) // and it is wider than our main blob
mainblob->w = mergeblob->x + mergeblob->w - mainblob->x; // extend our main blob
mergeblob = activeblobs.erase(mergeblob); // remove the merged blob
}
} else { // segment doesn't match a blob
Blob newblob; // make a new one
newblob.x = segment->start;
newblob.w = segment->end - segment->start;
newblob.y = y;
newblob.h = 1;
activeblobs.push_back(newblob);
}
}
for (BlobList::iterator blob = activeblobs.begin(); blob != activeblobs.end();) { // go through all of the active blobs
if (blob->y + blob->h + maxgapdist < y) { // if there is too large of a gap
if (blob->h > minblobheight) // if they're tall enough
blobs.push_back(*blob); // keep it, copy it to the main blob list
blob = activeblobs.erase(blob); // remove them from the active blob list
} else
++blob;
}
}
blobs.insert(blobs.end(), activeblobs.begin(), activeblobs.end()); // copy all blobs that reached the bottom of the screen to the main blob list
if (debug) {
for (BlobList::iterator i = blobs.begin(); i != blobs.end(); ++i) {
cout << "Blob at (" << i->x << "," << i->y << ") size " << i->w << "x" << i->h << endl;
}
}
}
static void filter_self_intersection( const GeometrySet<Dim>& input, GeometrySet<Dim>& output )
{
{
typedef std::list< CollectionElement<typename Point_d<Dim>::Type> > PointList;
PointList points;
std::copy( input.points().begin(), input.points().end(), std::back_inserter( points ) );
typename PointList::iterator it = points.begin();
while ( it != points.end() ) {
bool intersectsA = false;
for ( typename PointList::iterator it2 = points.begin(); it2 != points.end(); ++it2 ) {
if ( it == it2 ) {
continue;
}
PrimitiveHandle<Dim> pa1( &it->primitive() );
PrimitiveHandle<Dim> pa2( &it2->primitive() );
if ( CGAL::do_overlap( it->primitive().bbox(), it2->primitive().bbox() ) &&
algorithm::intersects( pa1, pa2 ) ) {
intersectsA = true;
GeometrySet<Dim> temp;
algorithm::intersection( pa1, pa2, temp );
std::copy( temp.points().begin(), temp.points().end(), std::back_inserter( points ) );
// erase it2
points.erase( it2 );
break;
}
}
if ( ! intersectsA ) {
output.addPrimitive( it->primitive() );
}
// suppress A
it = points.erase( it );
}
}
{
typedef std::list< CollectionElement<typename Segment_d<Dim>::Type> > SegmentList;
SegmentList segments;
std::copy( input.segments().begin(), input.segments().end(), std::back_inserter( segments ) );
typename SegmentList::iterator it = segments.begin();
while ( it != segments.end() ) {
bool intersectsA = false;
for ( typename SegmentList::iterator it2 = segments.begin(); it2 != segments.end(); ++it2 ) {
if ( it == it2 ) {
continue;
}
PrimitiveHandle<Dim> pa1( &it->primitive() );
PrimitiveHandle<Dim> pa2( &it2->primitive() );
if ( CGAL::do_overlap( it->primitive().bbox(), it2->primitive().bbox() ) &&
algorithm::intersects( pa1, pa2 ) ) {
intersectsA = true;
GeometrySet<Dim> temp;
algorithm::intersection( pa1, pa2, temp );
std::copy( temp.segments().begin(), temp.segments().end(), std::back_inserter( segments ) );
// erase it2
segments.erase( it2 );
break;
}
}
if ( ! intersectsA ) {
output.addPrimitive( it->primitive() );
}
// suppress A
it = segments.erase( it );
}
}
}
static void
bufferLinesToPolygons( const GeoShape& input, double b, GeoShape& output )
{
// buffering lines turns them into polygons
for( GeoPartList::const_iterator i = input.getParts().begin(); i != input.getParts().end(); i++ )
{
const GeoPointList& part = *i;
if ( part.size() < 2 ) continue;
GeoPointList new_part;
// collect segments in one direction and then the other.
SegmentList segments;
for( GeoPointList::const_iterator j = part.begin(); j != part.end()-1; j++ )
{
const osg::Vec3d& p0 = *j;
const osg::Vec3d& p1 = *(j+1);
osg::Vec3d d = p1-p0;
d.normalize();
osg::Vec3d b0( p0.x() + b*d.y(), p0.y() - b*d.x(), p1.z() );
osg::Vec3d b1( p1.x() + b*d.y(), p1.y() - b*d.x(), p1.z() );
segments.push_back( Segment( b0, b1 ) );
// after the last seg, add an end-cap:
if ( j == part.end()-2 )
{
osg::Vec3d b2( p1.x() - b*d.y(), p1.y() + b*d.x(), p1.z() );
segments.push_back( Segment( b1, b2 ) );
}
}
// now back the other way:
for( GeoPointList::const_reverse_iterator j = part.rbegin(); j != part.rend()-1; j++ )
{
const osg::Vec3d& p0 = *j;
const osg::Vec3d& p1 = *(j+1);
osg::Vec3d d = p1-p0;
d.normalize();
osg::Vec3d b0( p0.x() + b*d.y(), p0.y() - b*d.x(), p1.z() );
osg::Vec3d b1( p1.x() + b*d.y(), p1.y() - b*d.x(), p1.z() );
segments.push_back( Segment( b0, b1 ) );
// after the last seg, add an end-cap:
if ( j == part.rend()-2 )
{
osg::Vec3d b2( p1.x() - b*d.y(), p1.y() + b*d.x(), p1.z() );
segments.push_back( Segment( b1, b2 ) );
}
}
// then intersect each pair of segments to find the new verts:
for( SegmentList::iterator k = segments.begin(); k != segments.end(); k++ )
{
Segment& s0 = *k;
Segment& s1 = (k+1) != segments.end()? *(k+1) : *segments.begin();
osg::Vec3d isect;
if ( getLineIntersection( s0, s1, isect ) )
{
GeoPoint r( isect, part[0].getSRS() );
r.setDim( part[0].getDim() );
new_part.push_back( r );
}
}
if ( new_part.size() > 2 )
output.getParts().push_back( new_part );
}
}