// Draw the names of all the constellations
void ConstellationMgr::drawNames(StelRenderer* renderer, StelProjectorP projector, QFont& font) const
{
renderer->setBlendMode(BlendMode_Alpha);
vector < Constellation * >::const_iterator iter;
for (iter = asterisms.begin(); iter != asterisms.end(); iter++)
{
// Check if in the field of view
if (projector->projectCheck((*iter)->XYZname, (*iter)->XYname))
{
(*iter)->drawName(renderer, font);\
}
}
}
void Exoplanets::drawPointer(StelCore* core, StelRenderer* renderer, StelProjectorP projector)
{
const QList<StelObjectP> newSelected = GETSTELMODULE(StelObjectMgr)->getSelectedObject("Exoplanet");
if (!newSelected.empty())
{
const StelObjectP obj = newSelected[0];
Vec3d pos=obj->getJ2000EquatorialPos(core);
Vec3d screenpos;
// Compute 2D pos and return if outside screen
if (!projector->project(pos, screenpos))
return;
const Vec3f& c(obj->getInfoColor());
renderer->setGlobalColor(c[0],c[1],c[2]);
texPointer->bind();
renderer->setBlendMode(BlendMode_Alpha);
renderer->drawTexturedRect(screenpos[0] - 13.0f, screenpos[1] - 13.0f, 26.0f,
26.0f, StelApp::getInstance().getTotalRunTime() * 40.0f);
}
}
void Constellation::drawBoundaryOptim(StelRenderer* renderer, StelProjectorP projector) const
{
if (boundaryFader.getInterstate() < 0.001)
{
return;
}
renderer->setBlendMode(BlendMode_Alpha);
renderer->setGlobalColor(boundaryColor[0], boundaryColor[1],
boundaryColor[2], boundaryFader.getInterstate());
int size = singleSelected ? isolatedBoundarySegments.size()
: sharedBoundarySegments.size();
const SphericalCap& viewportHalfspace = projector->getBoundingCap();
for (int i = 0; i < size; i++)
{
std::vector<Vec3f>* points = singleSelected ? isolatedBoundarySegments[i]
: sharedBoundarySegments[i];
for (int j = 0; j < static_cast<int>(points->size()) - 1; j++)
{
const Vec3f pt1 = points->at(j) ;
const Vec3f pt2 = points->at(j +1);
if (pt1 * pt2 > 0.9999999f)
{
continue;
}
const Vec3d ptd1(pt1[0], pt1[1], pt1[2]);
const Vec3d ptd2(pt2[0], pt2[1], pt2[2]);
StelCircleArcRenderer(renderer, projector)
.drawGreatCircleArc(ptd1, ptd2, &viewportHalfspace);
}
}
}
// Draw constellations art textures
void ConstellationMgr::drawArt(StelRenderer* renderer, StelProjectorP projector) const
{
renderer->setBlendMode(BlendMode_Add);
vector < Constellation * >::const_iterator iter;
SphericalRegionP region = projector->getViewportConvexPolygon();
for (iter = asterisms.begin(); iter != asterisms.end(); ++iter)
{
Constellation* cons = *iter;
if(NULL == cons->artTexture && !cons->artTexturePath.isEmpty())
{
cons->artTexture = renderer->createTexture(cons->artTexturePath);
}
if(NULL == cons->artVertices)
{
// Tesselate on the plane assuming a tangential projection for the image
const int resolution = 5;
cons->generateArtVertices(renderer, resolution);
}
cons->drawArtOptim(renderer, projector, *region);
}
}
bool AngleMeasure::handleMouseMoves(int x, int y, Qt::MouseButtons)
{
if (dragging)
{
const StelProjectorP prj = StelApp::getInstance().getCore()->getProjection(StelCore::FrameEquinoxEqu);
prj->unProject(x,y,endPoint);
{ // Nick Fedoseev patch: improve click match
Vec3d win;
prj->project(endPoint,win);
float dx = x - win.v[0];
float dy = y - win.v[1];
prj->unProject(x+dx, y+dy, endPoint);
}
const StelProjectorP prjHor = StelApp::getInstance().getCore()->getProjection(StelCore::FrameAltAz, StelCore::RefractionOff);
prjHor->unProject(x,y,endPointHor);
calculateEnds();
lineVisible = true;
return true;
}
else
return false;
}
void AngleMeasure::handleMouseClicks(class QMouseEvent* event)
{
if (!flagShowAngleMeasure)
{
event->setAccepted(false);
return;
}
if (event->type()==QEvent::MouseButtonPress && event->button()==Qt::LeftButton)
{
const StelProjectorP prj = StelApp::getInstance().getCore()->getProjection(StelCore::FrameEquinoxEqu);
prj->unProject(event->x(),event->y(),startPoint);
{ // Nick Fedoseev patch: improve click match
Vec3d win;
prj->project(startPoint,win);
float dx = event->x() - win.v[0];
float dy = event->y() - win.v[1];
prj->unProject(event->x()+dx, event->y()+dy, startPoint);
}
const StelProjectorP prjHor = StelApp::getInstance().getCore()->getProjection(StelCore::FrameAltAz, StelCore::RefractionOff);
prjHor->unProject(event->x(),event->y(),startPointHor);
// first click reset the line... only draw it after we've dragged a little.
if (!dragging)
{
lineVisible = false;
endPoint = startPoint;
endPointHor=startPointHor;
}
else
lineVisible = true;
dragging = true;
calculateEnds();
event->setAccepted(true);
return;
}
else if (event->type()==QEvent::MouseButtonRelease && event->button()==Qt::LeftButton)
{
dragging = false;
calculateEnds();
event->setAccepted(true);
return;
}
else if (event->type()==QEvent::MouseButtonPress && event->button()==Qt::RightButton)
{
const StelProjectorP prj = StelApp::getInstance().getCore()->getProjection(StelCore::FrameEquinoxEqu);
prj->unProject(event->x(),event->y(),endPoint);
{ // Nick Fedoseev patch: improve click match
Vec3d win;
prj->project(endPoint,win);
float dx = event->x() - win.v[0];
float dy = event->y() - win.v[1];
prj->unProject(event->x()+dx, event->y()+dy, endPoint);
}
const StelProjectorP prjHor = StelApp::getInstance().getCore()->getProjection(StelCore::FrameAltAz, StelCore::RefractionOff);
prjHor->unProject(event->x(),event->y(),endPointHor);
calculateEnds();
event->setAccepted(true);
return;
}
event->setAccepted(false);
}
void AngleMeasure::drawOne(StelCore *core, const StelCore::FrameType frameType, const StelCore::RefractionMode refractionMode, const Vec3f txtColor, const Vec3f lineColor)
{
const StelProjectorP prj = core->getProjection(frameType, refractionMode);
StelPainter painter(prj);
painter.setFont(font);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
glEnable(GL_BLEND);
if (lineVisible.getInterstate() > 0.000001f)
{
Vec3d xy;
QString displayedText;
if (frameType==StelCore::FrameEquinoxEqu)
{
if (prj->project(perp1EndPoint,xy))
{
painter.setColor(txtColor[0], txtColor[1], txtColor[2], lineVisible.getInterstate());
if (flagShowPA)
displayedText = QString("%1 (%2%3)").arg(calculateAngle(), messagePA, calculatePositionAngle(startPoint, endPoint));
else
displayedText = calculateAngle();
painter.drawText(xy[0], xy[1], displayedText, 0, 15, 15);
}
}
else
{
if (prj->project(perp1EndPointHor,xy))
{
painter.setColor(txtColor[0], txtColor[1], txtColor[2], lineVisible.getInterstate());
if (flagShowHorizontalPA)
displayedText = QString("%1 (%2%3)").arg(calculateAngle(true), messagePA, calculatePositionAngle(startPointHor, endPointHor));
else
displayedText = calculateAngle(true);
painter.drawText(xy[0], xy[1], displayedText, 0, 15, -5);
}
}
glDisable(GL_TEXTURE_2D);
// OpenGL ES 2.0 doesn't have GL_LINE_SMOOTH. But it looks much better.
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glEnable(GL_LINE_SMOOTH);
#endif
// main line is a great circle
painter.setColor(lineColor[0], lineColor[1], lineColor[2], lineVisible.getInterstate());
if (frameType==StelCore::FrameEquinoxEqu)
{
painter.drawGreatCircleArc(startPoint, endPoint, NULL);
// End lines
painter.drawGreatCircleArc(perp1StartPoint, perp1EndPoint, NULL);
painter.drawGreatCircleArc(perp2StartPoint, perp2EndPoint, NULL);
}
else
{
painter.drawGreatCircleArc(startPointHor, endPointHor, NULL);
// End lines
painter.drawGreatCircleArc(perp1StartPointHor, perp1EndPointHor, NULL);
painter.drawGreatCircleArc(perp2StartPointHor, perp2EndPointHor, NULL);
}
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glDisable(GL_LINE_SMOOTH);
#endif
}
if (messageFader.getInterstate() > 0.000001f)
{
painter.setColor(txtColor[0], txtColor[1], txtColor[2], messageFader.getInterstate());
int x = 83;
int y = 120;
int ls = painter.getFontMetrics().lineSpacing();
painter.drawText(x, y, messageEnabled);
y -= ls;
painter.drawText(x, y, messageLeftButton);
y -= ls;
painter.drawText(x, y, messageRightButton);
}
glDisable(GL_BLEND);
}
bool SkyLabel::draw(StelCore* core, StelRenderer* renderer, StelProjectorP projector)
{
if(labelFader.getInterstate() <= 0.0)
return false;
Vec3d objectPos = labelObject->getJ2000EquatorialPos(core);
Vec3d labelXY;
projector->project(objectPos, labelXY);
renderer->setFont(labelFont);
double xOffset(0.);
double yOffset(0.);
char hJustify = 'c';
char vJustify = 'c';
if (labelSide.toUpper().contains("N"))
{
yOffset = 1.0;
vJustify = 'b'; // bottom justify text
}
else if (labelSide.toUpper().contains("S"))
{
yOffset = -1.0;
vJustify = 't'; // top justufy text
}
if (labelSide.toUpper().contains("E"))
{
xOffset = 1.0;
hJustify = 'l'; // right justify text
}
else if (labelSide.toUpper().contains("W"))
{
xOffset = -1.0;
hJustify = 'r'; // left justify text
}
if (labelDistance >= 0.0)
{
xOffset *= labelDistance;
yOffset *= labelDistance;
}
else
{
float shift = 4.0f + labelObject->getAngularSize(core) * M_PI / 180.0f *
projector->getPixelPerRadAtCenter() / 1.8f;
// use the object size
xOffset *= shift;
yOffset *= shift;
}
QFontMetrics fontMetrics(labelFont);
const float jxOffset = hJustify == 'r' ? fontMetrics.width(labelText) :
hJustify == 'c' ? fontMetrics.width(labelText) * 0.5 :
0.0;
const float jyOffset = vJustify == 't' ? fontMetrics.height() :
vJustify == 'c' ? fontMetrics.height() * 0.5 :
0.0;
renderer->setGlobalColor(labelColor[0], labelColor[1],
labelColor[2], labelFader.getInterstate());
renderer->drawText(TextParams(labelXY[0] + xOffset - jxOffset,
labelXY[1] + yOffset - jyOffset,
labelText).useGravity());
if (labelStyle == SkyLabel::Line)
{
renderer->setBlendMode(BlendMode_Alpha);
// screen coordinates of object
Vec3d objXY;
projector->project(objectPos, objXY);
double lineEndX = labelXY[0]+xOffset;
double lineEndY = labelXY[1]+yOffset;
if (vJustify == 'b')
lineEndY -= 5;
else if (vJustify == 't')
lineEndY += 5;
if (hJustify == 'l')
lineEndX -= 5;
else if (hJustify == 'r')
lineEndX += 5;
renderer->setGlobalColor(labelColor[0], labelColor[1], labelColor[2],
labelFader.getInterstate());
renderer->drawLine(lineEndX,lineEndY,objXY[0], objXY[1]);
}
return true;
}
void PointerCoordinates::draw(StelCore *core)
{
if (!isEnabled())
return;
const StelProjectorP prj = core->getProjection(StelCore::FrameJ2000, StelCore::RefractionAuto);
StelPainter sPainter(prj);
sPainter.setColor(textColor[0], textColor[1], textColor[2], 1.f);
font.setPixelSize(getFontSize());
sPainter.setFont(font);
QPoint p = StelMainView::getInstance().getMousePos(); // get screen coordinates of mouse cursor
Vec3d mousePosition;
float wh = prj->getViewportWidth()/2.; // get half of width of the screen
float hh = prj->getViewportHeight()/2.; // get half of height of the screen
float mx = p.x()-wh; // point 0 in center of the screen, axis X directed to right
float my = p.y()-hh; // point 0 in center of the screen, axis Y directed to bottom
// calculate position of mouse cursor via position of center of the screen (and invert axis Y)
// If coordinates are invalid, don't draw them.
bool coordsValid=false;
coordsValid = prj->unProject(prj->getViewportPosX()+wh+mx, prj->getViewportPosY()+hh+1-my, mousePosition);
{ // Nick Fedoseev patch
Vec3d win;
prj->project(mousePosition,win);
float dx = prj->getViewportPosX()+wh+mx - win.v[0];
float dy = prj->getViewportPosY()+hh+1-my - win.v[1];
coordsValid = prj->unProject(prj->getViewportPosX()+wh+mx+dx, prj->getViewportPosY()+hh+1-my+dy, mousePosition);
}
if (!coordsValid)
return;
bool withDecimalDegree = StelApp::getInstance().getFlagShowDecimalDegrees();
bool useSouthAzimuth = StelApp::getInstance().getFlagSouthAzimuthUsage();
QString coordsSystem, cxt, cyt;
double cx, cy;
switch (getCurrentCoordinateSystem())
{
case RaDecJ2000:
{
StelUtils::rectToSphe(&cx,&cy,mousePosition); // Calculate RA/DE (J2000.0) and show it...
coordsSystem = qc_("RA/Dec (J2000.0)", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(cx, 5, false, true);
cyt = StelUtils::radToDecDegStr(cy);
}
else
{
cxt = StelUtils::radToHmsStr(cx, true);
cyt = StelUtils::radToDmsStr(cy, true);
}
break;
}
case RaDec:
{
StelUtils::rectToSphe(&cx,&cy,core->j2000ToEquinoxEqu(mousePosition)); // Calculate RA/DE and show it...
coordsSystem = qc_("RA/Dec", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(cx, 5, false, true);
cyt = StelUtils::radToDecDegStr(cy);
}
else
{
cxt = StelUtils::radToHmsStr(cx, true);
cyt = StelUtils::radToDmsStr(cy, true);
}
break;
}
case AltAzi:
{
StelUtils::rectToSphe(&cy,&cx,core->j2000ToAltAz(mousePosition, StelCore::RefractionAuto));
float direction = 3.; // N is zero, E is 90 degrees
if (useSouthAzimuth)
direction = 2.;
cy = direction*M_PI - cy;
if (cy > M_PI*2)
cy -= M_PI*2;
coordsSystem = qc_("Az/Alt", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(cy);
cyt = StelUtils::radToDecDegStr(cx);
}
else
{
cxt = StelUtils::radToDmsStr(cy);
cyt = StelUtils::radToDmsStr(cx);
}
break;
}
case Galactic:
{
StelUtils::rectToSphe(&cx,&cy,core->j2000ToGalactic(mousePosition)); // Calculate galactic position and show it...
coordsSystem = qc_("Gal. Long/Lat", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(cx);
cyt = StelUtils::radToDecDegStr(cy);
}
else
{
cxt = StelUtils::radToDmsStr(cx, true);
cyt = StelUtils::radToDmsStr(cy, true);
}
break;
}
case Ecliptic:
{
double lambda, beta;
StelUtils::rectToSphe(&cx,&cy,core->j2000ToEquinoxEqu(mousePosition));
StelUtils::equToEcl(cx, cy, core->getCurrentPlanet()->getRotObliquity(core->getJDE()), &lambda, &beta); // Calculate ecliptic position and show it...
if (lambda<0) lambda+=2.0*M_PI;
coordsSystem = qc_("Ecl. Long/Lat", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(lambda);
cyt = StelUtils::radToDecDegStr(beta);
}
else
{
cxt = StelUtils::radToDmsStr(lambda, true);
cyt = StelUtils::radToDmsStr(beta, true);
}
break;
}
case EclipticJ2000:
{
double lambda, beta;
StelUtils::rectToSphe(&cx,&cy, mousePosition);
StelUtils::equToEcl(cx, cy, core->getCurrentPlanet()->getRotObliquity(2451545.0), &lambda, &beta); // Calculate ecliptic position and show it...
if (lambda<0) lambda+=2.0*M_PI;
coordsSystem = qc_("Ecl. Long/Lat (J2000.0)", "abbreviated in the plugin");
if (withDecimalDegree)
{
cxt = StelUtils::radToDecDegStr(lambda);
cyt = StelUtils::radToDecDegStr(beta);
}
else
{
cxt = StelUtils::radToDmsStr(lambda, true);
cyt = StelUtils::radToDmsStr(beta, true);
}
break;
}
case HourAngle:
{
Vec3d v = core->j2000ToAltAz(mousePosition, StelCore::RefractionAuto);
StelUtils::rectToSphe(&cx,&cy,Mat4d::zrotation(-core->getLocalSiderealTime())*core->altAzToEquinoxEqu(v, StelCore::RefractionOff));
cx = 2.*M_PI-cx;
coordsSystem = qc_("HA/Dec", "abbreviated in the plugin");
if (withDecimalDegree)
{
double ha_sidereal = cx*12/M_PI;
if (ha_sidereal>24.)
ha_sidereal -= 24.;
cxt = QString("%1h").arg(ha_sidereal, 0, 'f', 5);
cyt = StelUtils::radToDecDegStr(cy);
}
else
{
cxt = StelUtils::radToHmsStr(cx);
cyt = StelUtils::radToDmsStr(cy);
}
break;
}
}
QString coordsText = QString("%1: %2/%3").arg(coordsSystem).arg(cxt).arg(cyt);
sPainter.drawText(getCoordinatesPlace(coordsText).first, getCoordinatesPlace(coordsText).second, coordsText);
}
void SkyLine::draw(StelCore *core) const
{
if (!fader.getInterstate())
return;
StelProjectorP prj = core->getProjection(frameType, frameType!=StelCore::FrameAltAz ? StelCore::RefractionAuto : StelCore::RefractionOff);
// Get the bounding halfspace
const SphericalCap& viewPortSphericalCap = prj->getBoundingCap();
// Initialize a painter and set openGL state
StelPainter sPainter(prj);
sPainter.setColor(color[0], color[1], color[2], fader.getInterstate());
glEnable(GL_BLEND);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); // Normal transparency mode
Vec4f textColor(color[0], color[1], color[2], 0);
textColor[3]=fader.getInterstate();
ViewportEdgeIntersectCallbackData userData(&sPainter);
sPainter.setFont(font);
userData.textColor = textColor;
userData.text = label;
/////////////////////////////////////////////////
// Draw the line
SphericalCap meridianSphericalCap(Vec3d(0,0,1), 0);
Vec3d fpt(1,0,0);
if (line_type==MERIDIAN)
{
meridianSphericalCap.n.set(0,1,0);
}
Vec3d p1, p2;
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, meridianSphericalCap, p1, p2))
{
if ((viewPortSphericalCap.d<meridianSphericalCap.d && viewPortSphericalCap.contains(meridianSphericalCap.n))
|| (viewPortSphericalCap.d<-meridianSphericalCap.d && viewPortSphericalCap.contains(-meridianSphericalCap.n)))
{
// The meridian is fully included in the viewport, draw it in 3 sub-arcs to avoid length > 180.
const Mat4d& rotLon120 = Mat4d::rotation(meridianSphericalCap.n, 120.*M_PI/180.);
Vec3d rotFpt=fpt;
rotFpt.transfo4d(rotLon120);
Vec3d rotFpt2=rotFpt;
rotFpt2.transfo4d(rotLon120);
sPainter.drawGreatCircleArc(fpt, rotFpt, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt, rotFpt2, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt2, fpt, NULL, viewportEdgeIntersectCallback, &userData);
return;
}
else
return;
}
Vec3d middlePoint = p1+p2;
middlePoint.normalize();
if (!viewPortSphericalCap.contains(middlePoint))
middlePoint*=-1.;
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
sPainter.drawGreatCircleArc(p1, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(p2, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
// // Johannes: use a big radius as a dirty workaround for the bug that the
// // ecliptic line is not drawn around the observer, but around the sun:
// const Vec3d vv(1000000,0,0);
}
//! Draw the sky grid in the current frame
void SkyGrid::draw(const StelCore* core) const
{
const StelProjectorP prj = core->getProjection(frameType, frameType!=StelCore::FrameAltAz ? StelCore::RefractionAuto : StelCore::RefractionOff);
if (!fader.getInterstate())
return;
bool withDecimalDegree = dynamic_cast<StelGui*>(StelApp::getInstance().getGui())->getFlagShowDecimalDegrees();
// Look for all meridians and parallels intersecting with the disk bounding the viewport
// Check whether the pole are in the viewport
bool northPoleInViewport = false;
bool southPoleInViewport = false;
Vec3f win;
if (prj->project(Vec3f(0,0,1), win) && prj->checkInViewport(win))
northPoleInViewport = true;
if (prj->project(Vec3f(0,0,-1), win) && prj->checkInViewport(win))
southPoleInViewport = true;
// Get the longitude and latitude resolution at the center of the viewport
Vec3d centerV;
prj->unProject(prj->getViewportPosX()+prj->getViewportWidth()/2, prj->getViewportPosY()+prj->getViewportHeight()/2+1, centerV);
double lon2, lat2;
StelUtils::rectToSphe(&lon2, &lat2, centerV);
const double gridStepParallelRad = M_PI/180.*getClosestResolutionDMS(prj->getPixelPerRadAtCenter());
double gridStepMeridianRad;
if (northPoleInViewport || southPoleInViewport)
gridStepMeridianRad = (frameType==StelCore::FrameAltAz || frameType==StelCore::FrameGalactic) ? M_PI/180.* 10. : M_PI/180.* 15.;
else
{
const double closetResLon = (frameType==StelCore::FrameAltAz || frameType==StelCore::FrameGalactic) ? getClosestResolutionDMS(prj->getPixelPerRadAtCenter()*std::cos(lat2)) : getClosestResolutionHMS(prj->getPixelPerRadAtCenter()*std::cos(lat2));
gridStepMeridianRad = M_PI/180.* ((northPoleInViewport || southPoleInViewport) ? 15. : closetResLon);
}
// Get the bounding halfspace
const SphericalCap& viewPortSphericalCap = prj->getBoundingCap();
// Compute the first grid starting point. This point is close to the center of the screen
// and lays at the intersection of a meridien and a parallel
lon2 = gridStepMeridianRad*((int)(lon2/gridStepMeridianRad+0.5));
lat2 = gridStepParallelRad*((int)(lat2/gridStepParallelRad+0.5));
Vec3d firstPoint;
StelUtils::spheToRect(lon2, lat2, firstPoint);
firstPoint.normalize();
// Q_ASSERT(viewPortSphericalCap.contains(firstPoint));
// Initialize a painter and set openGL state
StelPainter sPainter(prj);
glEnable(GL_BLEND);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); // Normal transparency mode
Vec4f textColor(color[0], color[1], color[2], 0);
sPainter.setColor(color[0],color[1],color[2], fader.getInterstate());
textColor*=2;
textColor[3]=fader.getInterstate();
sPainter.setFont(font);
ViewportEdgeIntersectCallbackData userData(&sPainter);
userData.textColor = textColor;
userData.frameType = frameType;
/////////////////////////////////////////////////
// Draw all the meridians (great circles)
SphericalCap meridianSphericalCap(Vec3d(1,0,0), 0);
Mat4d rotLon = Mat4d::zrotation(gridStepMeridianRad);
Vec3d fpt = firstPoint;
Vec3d p1, p2;
int maxNbIter = (int)(M_PI/gridStepMeridianRad);
int i;
for (i=0; i<maxNbIter; ++i)
{
StelUtils::rectToSphe(&lon2, &lat2, fpt);
userData.raAngle = lon2;
meridianSphericalCap.n = fpt^Vec3d(0,0,1);
meridianSphericalCap.n.normalize();
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, meridianSphericalCap, p1, p2))
{
if (viewPortSphericalCap.d<meridianSphericalCap.d && viewPortSphericalCap.contains(meridianSphericalCap.n))
{
// The meridian is fully included in the viewport, draw it in 3 sub-arcs to avoid length > 180.
const Mat4d& rotLon120 = Mat4d::rotation(meridianSphericalCap.n, 120.*M_PI/180.);
Vec3d rotFpt=fpt;
rotFpt.transfo4d(rotLon120);
Vec3d rotFpt2=rotFpt;
rotFpt2.transfo4d(rotLon120);
sPainter.drawGreatCircleArc(fpt, rotFpt, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt, rotFpt2, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt2, fpt, NULL, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
continue;
}
else
break;
}
Vec3d middlePoint = p1+p2;
middlePoint.normalize();
if (!viewPortSphericalCap.contains(middlePoint))
middlePoint*=-1.;
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
sPainter.drawGreatCircleArc(p1, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(p2, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
}
if (i!=maxNbIter)
{
rotLon = Mat4d::zrotation(-gridStepMeridianRad);
fpt = firstPoint;
fpt.transfo4d(rotLon);
for (int j=0; j<maxNbIter-i; ++j)
{
StelUtils::rectToSphe(&lon2, &lat2, fpt);
userData.raAngle = lon2;
meridianSphericalCap.n = fpt^Vec3d(0,0,1);
meridianSphericalCap.n.normalize();
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, meridianSphericalCap, p1, p2))
break;
Vec3d middlePoint = p1+p2;
middlePoint.normalize();
if (!viewPortSphericalCap.contains(middlePoint))
middlePoint*=-1;
sPainter.drawGreatCircleArc(p1, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(p2, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
}
}
/////////////////////////////////////////////////
// Draw all the parallels (small circles)
SphericalCap parallelSphericalCap(Vec3d(0,0,1), 0);
rotLon = Mat4d::rotation(firstPoint^Vec3d(0,0,1), gridStepParallelRad);
fpt = firstPoint;
maxNbIter = (int)(M_PI/gridStepParallelRad)-1;
for (i=0; i<maxNbIter; ++i)
{
StelUtils::rectToSphe(&lon2, &lat2, fpt);
if (withDecimalDegree)
userData.text = StelUtils::radToDecDegStr(lat2);
else
userData.text = StelUtils::radToDmsStrAdapt(lat2);
parallelSphericalCap.d = fpt[2];
if (parallelSphericalCap.d>0.9999999)
break;
const Vec3d rotCenter(0,0,parallelSphericalCap.d);
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, parallelSphericalCap, p1, p2))
{
if ((viewPortSphericalCap.d<parallelSphericalCap.d && viewPortSphericalCap.contains(parallelSphericalCap.n))
|| (viewPortSphericalCap.d<-parallelSphericalCap.d && viewPortSphericalCap.contains(-parallelSphericalCap.n)))
{
// The parallel is fully included in the viewport, draw it in 3 sub-arcs to avoid lengths >= 180 deg
static const Mat4d rotLon120 = Mat4d::zrotation(120.*M_PI/180.);
Vec3d rotFpt=fpt;
rotFpt.transfo4d(rotLon120);
Vec3d rotFpt2=rotFpt;
rotFpt2.transfo4d(rotLon120);
sPainter.drawSmallCircleArc(fpt, rotFpt, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(rotFpt, rotFpt2, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(rotFpt2, fpt, rotCenter, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
continue;
}
else
break;
}
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
Vec3d middlePoint = p1-rotCenter+p2-rotCenter;
middlePoint.normalize();
middlePoint*=(p1-rotCenter).length();
middlePoint+=rotCenter;
if (!viewPortSphericalCap.contains(middlePoint))
{
middlePoint-=rotCenter;
middlePoint*=-1.;
middlePoint+=rotCenter;
}
sPainter.drawSmallCircleArc(p1, middlePoint, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(p2, middlePoint, rotCenter, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
}
if (i!=maxNbIter)
{
rotLon = Mat4d::rotation(firstPoint^Vec3d(0,0,1), -gridStepParallelRad);
fpt = firstPoint;
fpt.transfo4d(rotLon);
for (int j=0; j<maxNbIter-i; ++j)
{
StelUtils::rectToSphe(&lon2, &lat2, fpt);
if (withDecimalDegree)
userData.text = StelUtils::radToDecDegStr(lat2);
else
userData.text = StelUtils::radToDmsStrAdapt(lat2);
parallelSphericalCap.d = fpt[2];
const Vec3d rotCenter(0,0,parallelSphericalCap.d);
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, parallelSphericalCap, p1, p2))
{
if ((viewPortSphericalCap.d<parallelSphericalCap.d && viewPortSphericalCap.contains(parallelSphericalCap.n))
|| (viewPortSphericalCap.d<-parallelSphericalCap.d && viewPortSphericalCap.contains(-parallelSphericalCap.n)))
{
// The parallel is fully included in the viewport, draw it in 3 sub-arcs to avoid lengths >= 180 deg
static const Mat4d rotLon120 = Mat4d::zrotation(120.*M_PI/180.);
Vec3d rotFpt=fpt;
rotFpt.transfo4d(rotLon120);
Vec3d rotFpt2=rotFpt;
rotFpt2.transfo4d(rotLon120);
sPainter.drawSmallCircleArc(fpt, rotFpt, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(rotFpt, rotFpt2, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(rotFpt2, fpt, rotCenter, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
continue;
}
else
break;
}
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
Vec3d middlePoint = p1-rotCenter+p2-rotCenter;
middlePoint.normalize();
middlePoint*=(p1-rotCenter).length();
middlePoint+=rotCenter;
if (!viewPortSphericalCap.contains(middlePoint))
{
middlePoint-=rotCenter;
middlePoint*=-1.;
middlePoint+=rotCenter;
}
sPainter.drawSmallCircleArc(p1, middlePoint, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(p2, middlePoint, rotCenter, viewportEdgeIntersectCallback, &userData);
fpt.transfo4d(rotLon);
}
}
}
// Increment/decrement smoothly the vision field and position
void StelMovementMgr::updateMotion(double deltaTime)
{
updateVisionVector(deltaTime);
const StelProjectorP proj = core->getProjection(StelCore::FrameJ2000);
// the more it is zoomed, the lower the moving speed is (in angle)
double depl=keyMoveSpeed*deltaTime*1000*currentFov;
double deplzoom=keyZoomSpeed*deltaTime*1000*proj->deltaZoom(currentFov*(M_PI/360.0))*(360.0/M_PI);
if (flagMoveSlow)
{
depl *= 0.2;
deplzoom *= 0.2;
}
if (deltaAz<0)
{
deltaAz = -depl/30;
if (deltaAz<-0.2)
deltaAz = -0.2;
}
else if (deltaAz>0)
{
deltaAz = (depl/30);
if (deltaAz>0.2)
deltaAz = 0.2;
}
if (deltaAlt<0)
{
deltaAlt = -depl/30;
if (deltaAlt<-0.2)
deltaAlt = -0.2;
}
else if (deltaAlt>0)
{
deltaAlt = depl/30;
if (deltaAlt>0.2)
deltaAlt = 0.2;
}
if (deltaFov<0)
{
deltaFov = -deplzoom*5;
if (deltaFov<-0.15*currentFov)
deltaFov = -0.15*currentFov;
}
else if (deltaFov>0)
{
deltaFov = deplzoom*5;
if (deltaFov>20)
deltaFov = 20;
}
if (deltaFov != 0 )
{
changeFov(deltaFov);
}
panView(deltaAz, deltaAlt);
updateAutoZoom(deltaTime);
}
void SkyLine::draw(StelCore *core) const
{
if (!fader.getInterstate())
return;
StelProjectorP prj = core->getProjection(frameType, frameType!=StelCore::FrameAltAz ? StelCore::RefractionAuto : StelCore::RefractionOff);
// Get the bounding halfspace
const SphericalCap& viewPortSphericalCap = prj->getBoundingCap();
// Initialize a painter and set openGL state
StelPainter sPainter(prj);
sPainter.setColor(color[0], color[1], color[2], fader.getInterstate());
glEnable(GL_BLEND);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); // Normal transparency mode
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glEnable(GL_LINE_SMOOTH);
#endif
Vec4f textColor(color[0], color[1], color[2], 0);
textColor[3]=fader.getInterstate();
ViewportEdgeIntersectCallbackData userData(&sPainter);
sPainter.setFont(font);
userData.textColor = textColor;
userData.text = label;
/////////////////////////////////////////////////
// Draw the line
// Precession circles are Small Circles, all others are Great Circles.
if (line_type==PRECESSIONCIRCLE_N || line_type==PRECESSIONCIRCLE_S)
{
const double lat=(line_type==PRECESSIONCIRCLE_S ? -1.0 : 1.0) * (M_PI/2.0-getPrecessionAngleVondrakCurrentEpsilonA());
SphericalCap declinationCap(Vec3d(0,0,1), std::sin(lat));
const Vec3d rotCenter(0,0,declinationCap.d);
Vec3d p1, p2;
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, declinationCap, p1, p2))
{
if ((viewPortSphericalCap.d<declinationCap.d && viewPortSphericalCap.contains(declinationCap.n))
|| (viewPortSphericalCap.d<-declinationCap.d && viewPortSphericalCap.contains(-declinationCap.n)))
{
// The line is fully included in the viewport, draw it in 3 sub-arcs to avoid length > 180.
Vec3d pt1;
Vec3d pt2;
Vec3d pt3;
const double lon1=0.0;
const double lon2=120.0*M_PI/180.0;
const double lon3=240.0*M_PI/180.0;
StelUtils::spheToRect(lon1, lat, pt1); pt1.normalize();
StelUtils::spheToRect(lon2, lat, pt2); pt2.normalize();
StelUtils::spheToRect(lon3, lat, pt3); pt3.normalize();
sPainter.drawSmallCircleArc(pt1, pt2, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(pt2, pt3, rotCenter, viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(pt3, pt1, rotCenter, viewportEdgeIntersectCallback, &userData);
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glDisable(GL_LINE_SMOOTH);
#endif
glDisable(GL_BLEND);
return;
}
else
{
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glDisable(GL_LINE_SMOOTH);
#endif
glDisable(GL_BLEND);
return;
}
}
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
Vec3d middlePoint = p1-rotCenter+p2-rotCenter;
middlePoint.normalize();
middlePoint*=(p1-rotCenter).length();
middlePoint+=rotCenter;
if (!viewPortSphericalCap.contains(middlePoint))
{
middlePoint-=rotCenter;
middlePoint*=-1.;
middlePoint+=rotCenter;
}
sPainter.drawSmallCircleArc(p1, middlePoint, rotCenter,viewportEdgeIntersectCallback, &userData);
sPainter.drawSmallCircleArc(p2, middlePoint, rotCenter, viewportEdgeIntersectCallback, &userData);
// OpenGL ES 2.0 doesn't have GL_LINE_SMOOTH
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glDisable(GL_LINE_SMOOTH);
#endif
glDisable(GL_BLEND);
return;
}
// All the other "lines" are Great Circles
SphericalCap meridianSphericalCap(Vec3d(0,0,1), 0);
Vec3d fpt(1,0,0);
if ((line_type==MERIDIAN) || (line_type==COLURE_1))
{
meridianSphericalCap.n.set(0,1,0);
}
if ((line_type==PRIME_VERTICAL) || (line_type==COLURE_2))
{
meridianSphericalCap.n.set(1,0,0);
fpt.set(0,0,1);
}
if (line_type==LONGITUDE)
{
Vec3d coord;
double lambda, beta;
StelUtils::rectToSphe(&lambda, &beta, core->getCurrentPlanet()->getHeliocentricEclipticPos());
StelUtils::spheToRect(lambda + M_PI/2., 0., coord);
meridianSphericalCap.n.set(coord[0],coord[1],coord[2]);
fpt.set(0,0,1);
}
Vec3d p1, p2;
if (!SphericalCap::intersectionPoints(viewPortSphericalCap, meridianSphericalCap, p1, p2))
{
if ((viewPortSphericalCap.d<meridianSphericalCap.d && viewPortSphericalCap.contains(meridianSphericalCap.n))
|| (viewPortSphericalCap.d<-meridianSphericalCap.d && viewPortSphericalCap.contains(-meridianSphericalCap.n)))
{
// The meridian is fully included in the viewport, draw it in 3 sub-arcs to avoid length > 180.
const Mat4d& rotLon120 = Mat4d::rotation(meridianSphericalCap.n, 120.*M_PI/180.);
Vec3d rotFpt=fpt;
rotFpt.transfo4d(rotLon120);
Vec3d rotFpt2=rotFpt;
rotFpt2.transfo4d(rotLon120);
sPainter.drawGreatCircleArc(fpt, rotFpt, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt, rotFpt2, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(rotFpt2, fpt, NULL, viewportEdgeIntersectCallback, &userData);
return;
}
else
return;
}
Vec3d middlePoint = p1+p2;
middlePoint.normalize();
if (!viewPortSphericalCap.contains(middlePoint))
middlePoint*=-1.;
// Draw the arc in 2 sub-arcs to avoid lengths > 180 deg
sPainter.drawGreatCircleArc(p1, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
sPainter.drawGreatCircleArc(p2, middlePoint, NULL, viewportEdgeIntersectCallback, &userData);
// OpenGL ES 2.0 doesn't have GL_LINE_SMOOTH
#ifdef GL_LINE_SMOOTH
if (QOpenGLContext::currentContext()->format().renderableType()==QSurfaceFormat::OpenGL)
glDisable(GL_LINE_SMOOTH);
#endif
glDisable(GL_BLEND);
// // Johannes: use a big radius as a dirty workaround for the bug that the
// // ecliptic line is not drawn around the observer, but around the sun:
// const Vec3d vv(1000000,0,0);
}
void Atmosphere::updateGrid(const StelProjectorP projector)
{
viewport = projector->getViewport();
const float viewportWidth = projector->getViewportWidth();
const float viewportHeight = projector->getViewportHeight();
const float aspectRatio = viewportWidth / viewportHeight;
skyResolutionY = StelApp::getInstance()
.getSettings()
->value("landscape/atmosphereybin", 44)
.toInt();
const float resolutionX = skyResolutionY * 0.5 * sqrt(3.0) * aspectRatio;
skyResolutionX = static_cast<int>(floor(0.5 + resolutionX));
const float stepX = viewportWidth / (skyResolutionX - 0.5);
const float stepY = viewportHeight / skyResolutionY;
const float viewportLeft = projector->getViewportPosX();
const float viewportBottom = projector->getViewportPosY();
vertexGrid->unlock();
vertexGrid->clear();
// Construct the vertex grid.
for(int y = 0; y <= skyResolutionY; ++y)
{
const float yPos = viewportBottom + y * stepY;
for (int x = 0; x <= skyResolutionX; ++x)
{
const float offset = (x == 0) ? 0.0f :
(x == skyResolutionX) ? viewportWidth
: (x - 0.5 * (y & 1)) * stepX;
const float xPos = viewportLeft + offset;
vertexGrid->addVertex(Vertex(Vec2f(xPos, yPos), Vec4f()));
}
}
vertexGrid->lock();
// The grid is (resolutionX + 1) * (resolutionY + 1),
// so the rows are for 0 to resolutionY-1
// The last row includes vertices in row resolutionY
// Construct an index buffer for each row in the grid.
for(int row = 0; row < skyResolutionY; ++row)
{
StelIndexBuffer* buffer;
// Reuse previously used row index buffer.
if(rowIndices.size() > row)
{
buffer = rowIndices[row];
buffer->unlock();
buffer->clear();
}
// Add new row index buffer.
else
{
buffer = renderer->createIndexBuffer(IndexType_U16);
rowIndices.append(buffer);
}
uint g0 = row * (1 + skyResolutionX);
uint g1 = (row + 1) * (1 + skyResolutionX);
for (int col = 0; col <= skyResolutionX; ++col)
{
buffer->addIndex(g0++);
buffer->addIndex(g1++);
}
buffer->lock();
Q_ASSERT_X(buffer->length() == (skyResolutionX + 1) * 2, Q_FUNC_INFO,
"Unexpected grid row index buffer size");
}
Q_ASSERT_X(rowIndices.size() >= skyResolutionY, Q_FUNC_INFO,
"Not enough row index buffers");
}
// returns true if visible
// Assumes that we are in local frame
void Meteor::draw(const StelCore* core, StelPainter& sPainter)
{
if (!alive)
return;
const StelProjectorP proj = sPainter.getProjector();
Vec3d spos = position;
Vec3d epos = posTrain;
// convert to equ
spos.transfo4d(mmat);
epos.transfo4d(mmat);
// convert to local and correct for earth radius [since equ and local coordinates in stellarium use same 0 point!]
spos = core->equinoxEquToAltAz( spos );
epos = core->equinoxEquToAltAz( epos );
spos[2] -= EARTH_RADIUS;
epos[2] -= EARTH_RADIUS;
// 1216 is to scale down under 1 for desktop version
spos/=1216;
epos/=1216;
// qDebug("[%f %f %f] (%d, %d) (%d, %d)\n", position[0], position[1], position[2], (int)start[0], (int)start[1], (int)end[0], (int)end[1]);
if (train)
{
// connect this point with last drawn point
double tmag = mag*distMultiplier;
// compute an intermediate point so can curve slightly along projection distortions
Vec3d posi = posInternal;
posi[2] = position[2] + (posTrain[2] - position[2])/2;
posi.transfo4d(mmat);
posi = core->equinoxEquToAltAz( posi );
posi[2] -= EARTH_RADIUS;
posi/=1216;
// draw dark to light
Vec4f colorArray[3];
colorArray[0].set(0,0,0,0);
colorArray[1].set(1,1,1,tmag*0.5);
colorArray[2].set(1,1,1,tmag);
Vec3d vertexArray[3];
vertexArray[0]=epos;
vertexArray[1]=posi;
vertexArray[2]=spos;
sPainter.setColorPointer(4, GL_FLOAT, colorArray);
sPainter.setVertexPointer(3, GL_DOUBLE, vertexArray);
// TODO the crash doesn't appear when the last true is set to false
sPainter.enableClientStates(true, false, true);
sPainter.drawFromArray(StelPainter::LineStrip, 3, 0, true);
sPainter.enableClientStates(false);
}
else
{
sPainter.setPointSize(1.f);
Vec3d start;
proj->project(spos, start);
sPainter.drawPoint2d(start[0],start[1]);
}
train = 1;
}
void StelQGLRenderer::drawText(const TextParams& params)
{
statistics[TEXT_DRAWS] += 1.0;
StelQGLTextureBackend* currentTexture = currentlyBoundTextures[0];
if(params.string_.length() == 0)
{
return;
}
viewport.enablePainting();
if(currentFontSet)
{
viewport.setFont(currentFont);
}
QPainter* painter = viewport.getPainter();
Q_ASSERT_X(NULL != painter, Q_FUNC_INFO,
"Trying to draw text but painting is disabled");
QFontMetrics fontMetrics = painter->fontMetrics();
StelProjectorP projector = NULL == params.projector_
? StelApp::getInstance().getCore()->getProjection2d()
: params.projector_;
Vec3f win;
if(params.doNotProject_)
{
win = params.position_;
}
else if(!projector->project(params.position_, win))
{
viewport.disablePainting();
return;
}
const int x = win[0];
const int y = win[1];
// Avoid drawing if outside viewport.
// We do a worst-case approximation as getting exact text dimensions is expensive.
// We also account for rotation by assuming the worst case in bot X and Y
// (culling with a rotating rectangle would be expensive)
const int cullDistance =
std::max(fontMetrics.height(), params.string_.size() * fontMetrics.maxWidth());
const Vec4i viewXywh = projector->getViewportXywh();
const int viewMinX = viewXywh[0];
const int viewMinY = viewXywh[1];
const int viewMaxX = viewMinX + viewXywh[2];
const int viewMaxY = viewMinY + viewXywh[3];
if(y + cullDistance < viewMinY || y - cullDistance > viewMaxY ||
x + cullDistance < viewMinX || x - cullDistance > viewMaxX)
{
viewport.disablePainting();
return;
}
if(projector->useGravityLabels() && !params.noGravity_)
{
drawTextGravityHelper(params, *painter, x, y, projector);
return;
}
const int pixelSize = painter->font().pixelSize();
// Strings drawn by drawText() can differ by text, font size, or the font itself.
const QByteArray hash = params.string_.toUtf8() + QByteArray::number(pixelSize) +
painter->font().family().toUtf8();
StelQGLTextureBackend* textTexture = textTextureCache.object(hash);
// No texture in cache for this string, need to draw it.
if (NULL == textTexture)
{
const QRect extents = fontMetrics.boundingRect(params.string_);
// Width and height of the text.
// Texture width/height is required to be at least equal to this.
//
// Both X and Y need to be at least 1 so we don't create an empty image
// (doesn't work with textures)
const int requiredWidth = std::max(1, extents.width() + 1 + static_cast<int>(0.02f * extents.width()));
const int requiredHeight = std::max(1, extents.height());
// Create temporary image and render text into it
// QImage is used solely to reuse existing QGLTextureBackend constructor
// function. QPixmap could be used as well (not sure which is faster,
// needs profiling)
QImage image = areNonPowerOfTwoTexturesSupported()
? QImage(requiredWidth, requiredHeight, QImage::Format_ARGB32_Premultiplied)
: QImage(StelUtils::smallestPowerOfTwoGreaterOrEqualTo(requiredWidth),
StelUtils::smallestPowerOfTwoGreaterOrEqualTo(requiredHeight),
QImage::Format_ARGB32);
image.fill(Qt::transparent);
QPainter fontPainter(&image);
fontPainter.setFont(painter->font());
fontPainter.setRenderHints(QPainter::TextAntialiasing, true);
fontPainter.setPen(Qt::white);
// The second argument ensures the text is positioned correctly even if
// the image is enlarged to power-of-two.
fontPainter.drawText(-extents.x(),
image.height() - requiredHeight - extents.y(),
params.string_);
textTexture = StelQGLTextureBackend::constructFromImage
(this, QString(), TextureParams().filtering(TextureFiltering_Linear), image);
const QSize size = textTexture->getDimensions();
if(!textTexture->getStatus() == TextureStatus_Loaded)
{
qWarning() << "Texture error: " << textTexture->getErrorMessage();
Q_ASSERT_X(false, Q_FUNC_INFO, "Failed to construct a text texture");
}
textTextureCache.insert(hash, textTexture, 4 * size.width() * size.height());
}
// Even if NPOT textures are not supported, we always draw the full rectangle
// of the texture. The extra space is fully transparent, so it's not an issue.
// Shortcut variables to calculate the rectangle.
const QSize size = textTexture->getDimensions();
const float w = size.width();
const float h = size.height();
const float xShift = params.xShift_;
const float yShift = params.yShift_;
const float angleDegrees =
params.angleDegrees_ +
(params.noGravity_ ? 0.0f : projector->getDefaultAngleForGravityText());
// Zero out very small angles.
//
// (this could also be used to optimize the case with zero angled
// to avoid sin/cos if needed)
const bool angled = std::fabs(angleDegrees) >= 1.0f * M_PI / 180.f;
const float cosr = angled ? std::cos(angleDegrees * M_PI / 180.0) : 1.0f;
const float sinr = angled ? std::sin(angleDegrees * M_PI / 180.0) : 0.0f;
// Corners of the (possibly rotated) texture rectangle.
const Vec2f ne(round(x + cosr * xShift - sinr * yShift),
round(y + sinr * xShift + cosr * yShift));
const Vec2f nw(round(x + cosr * (w + xShift) - sinr * yShift),
round(y + sinr * (w + xShift) + cosr * yShift));
const Vec2f se(round(x + cosr * xShift - sinr * (h + yShift)),
round(y + sinr * xShift + cosr * (h + yShift)));
const Vec2f sw(round(x + cosr * (w + xShift) - sinr * (h + yShift)),
round(y + sinr * (w + xShift) + cosr * (h + yShift)));
// Construct the text vertex buffer if it doesn't exist yet, otherwise clear it.
if(NULL == textBuffer)
{
textBuffer = createVertexBuffer<TexturedVertex>(PrimitiveType_TriangleStrip);
}
else
{
textBuffer->unlock();
textBuffer->clear();
}
textBuffer->addVertex(TexturedVertex(ne, Vec2f(0.0f, 0.0f)));
textBuffer->addVertex(TexturedVertex(nw, Vec2f(1.0f, 0.0f)));
textBuffer->addVertex(TexturedVertex(se, Vec2f(0.0f, 1.0f)));
textBuffer->addVertex(TexturedVertex(sw, Vec2f(1.0f, 1.0f)));
textBuffer->lock();
// Draw.
const BlendMode oldBlendMode = blendMode;
setBlendMode(BlendMode_Alpha);
textTexture->bind(0);
drawVertexBuffer(textBuffer);
setBlendMode(oldBlendMode);
// Reset user-bound texture.
if(NULL != currentTexture)
{
currentTexture->bind(0);
}
viewport.disablePainting();
}
// Draw the Comet and all the related infos : name, circle etc... GZ: Taken from Planet.cpp 2013-11-05 and extended
void Comet::draw(StelCore* core, float maxMagLabels, const QFont& planetNameFont)
{
if (hidden)
return;
if (getEnglishName() == core->getCurrentLocation().planetName)
{ // GZ moved this up. Maybe even don't do that? E.g., draw tail while riding the comet? Decide later.
return;
}
// The CometOrbit is in fact available in userDataPtr!
CometOrbit* orbit=(CometOrbit*)userDataPtr;
Q_ASSERT(orbit);
if (!orbit->objectDateValid(core->getJDay())) return; // out of useful date range. This allows having hundreds of comet elements.
if (orbit->getUpdateTails()){
// Compute lengths and orientations from orbit object, but only if required.
// TODO: This part should possibly be moved to another thread to keep draw() free from too much computation.
Vec2f tailFactors=getComaDiameterAndTailLengthAU();
float gasTailEndRadius=qMax(tailFactors[0], 0.025f*tailFactors[1]) ; // This avoids too slim gas tails for bright comets like Hale-Bopp.
float gasparameter=gasTailEndRadius*gasTailEndRadius/(2.0f*tailFactors[1]); // parabola formula: z=r²/2p, so p=r²/2z
// The dust tail is thicker and usually shorter. The factors can be configured in the elements.
float dustparameter=gasTailEndRadius*gasTailEndRadius*dustTailWidthFactor*dustTailWidthFactor/(2.0f*dustTailLengthFactor*tailFactors[1]);
// Find valid parameters to create paraboloid vertex arrays: dustTail, gasTail.
computeParabola(gasparameter, gasTailEndRadius, -0.5f*gasparameter, gastailVertexArr, gastailTexCoordArr, gastailIndices);
// This was for a rotated straight parabola:
//computeParabola(dustparameter, 2.0f*tailFactors[0], -0.5f*dustparameter, dusttailVertexArr, dusttailTexCoordArr, dusttailIndices);
// Now we make a skewed parabola. Skew factor 15 (last arg) ad-hoc/empirical. TBD later: Find physically correct solution.
computeParabola(dustparameter, dustTailWidthFactor*gasTailEndRadius, -0.5f*dustparameter, dusttailVertexArr, gastailTexCoordArr, gastailIndices, 25.0f*orbit->getVelocity().length());
// Note that we use a diameter larger than what the formula returns. A scale factor of 1.2 is ad-hoc/empirical (GZ), but may look better.
computeComa(1.0f*tailFactors[0]);
orbit->setUpdateTails(false); // don't update until position has been recalculated elsewhere
}
Mat4d mat = Mat4d::translation(eclipticPos) * rotLocalToParent;
/* // We can remove that - a Comet has no parent except for the sun...
PlanetP p = parent;
while (p && p->parent)
{
mat = Mat4d::translation(p->eclipticPos) * mat * p->rotLocalToParent;
p = p->parent;
}
*/
// This removed totally the Planet shaking bug!!!
StelProjector::ModelViewTranformP transfo = core->getHeliocentricEclipticModelViewTransform();
transfo->combine(mat);
// Compute the 2D position and check if in the screen
const StelProjectorP prj = core->getProjection(transfo);
float screenSz = getAngularSize(core)*M_PI/180.*prj->getPixelPerRadAtCenter();
float viewport_left = prj->getViewportPosX();
float viewport_bottom = prj->getViewportPosY();
if (prj->project(Vec3d(0), screenPos)
&& screenPos[1]>viewport_bottom - screenSz && screenPos[1] < viewport_bottom + prj->getViewportHeight()+screenSz
&& screenPos[0]>viewport_left - screenSz && screenPos[0] < viewport_left + prj->getViewportWidth() + screenSz)
{
// Draw the name, and the circle if it's not too close from the body it's turning around
// this prevents name overlapping (ie for jupiter satellites)
float ang_dist = 300.f*atan(getEclipticPos().length()/getEquinoxEquatorialPos(core).length())/core->getMovementMgr()->getCurrentFov();
// if (ang_dist==0.f) ang_dist = 1.f; // if ang_dist == 0, the Planet is sun.. --> GZ: we can remove it.
// by putting here, only draw orbit if Comet is visible for clarity
drawOrbit(core); // TODO - fade in here also...
if (flagLabels && ang_dist>0.25 && maxMagLabels>getVMagnitude(core))
{
labelsFader=true;
}
else
{
labelsFader=false;
}
drawHints(core, planetNameFont);
draw3dModel(core,transfo,screenSz);
}
// tails should also be drawn if core is off-screen...
drawTail(core,transfo,true); // gas tail
drawTail(core,transfo,false); // dust tail
//Coma: this is just a fan disk tilted towards the observer;-)
drawComa(core, transfo);
return;
}
void StelViewportDistorterFisheyeToSphericMirror::generateDistortion
(const QSettings& conf, const StelProjectorP& proj,
const double distorterMaxFOV, StelRenderer* renderer)
{
double gamma;
loadGenerationParameters(conf, gamma);
const int cols = maxGridX + 1;
const int rows = maxGridY + 1;
const float viewScale = 0.5 * newProjectorParams.viewportFovDiameter /
proj->fovToViewScalingFactor(distorterMaxFOV*(M_PI/360.0));
texCoordGrid = new Vec2f[cols * rows];
float* heightGrid = new float[cols * rows];
float maxHeight = 0;
SphericMirrorCalculator calc(conf);
// Generate grid vertices/texcoords.
for (int row = 0; row <= maxGridY; row++)
{
for (int col = 0; col <= maxGridX; col++)
{
Vertex vertex;
float &height(heightGrid[row * cols + col]);
// Clamp to screen extents.
vertex.position[0] = (col == 0) ? 0.f :
(col == maxGridX) ? screenWidth :
(col - 0.5f * (row & 1)) * stepX;
vertex.position[1] = row * stepY;
Vec3f v,vX,vY;
bool rc = calc.retransform((vertex.position[0]-0.5f*screenWidth) / screenHeight,
(vertex.position[1]-0.5f*screenHeight) / screenHeight,
v,vX,vY);
rc &= proj->forward(v);
const float x = newProjectorParams.viewportCenter[0] + v[0] * viewScale;
const float y = newProjectorParams.viewportCenter[1] + v[1] * viewScale;
height = rc ? (vX^vY).length() : 0.0;
// sharp image up to the border of the fisheye image, at the cost of
// accepting clamping artefacts. You can get rid of the clamping
// artefacts by specifying a viewport size a little less then
// (1<<n)*(1<<n), for instance 1022*1022. With a viewport size of
// 512*512 and viewportFovDiameter=512 you will get clamping artefacts
// in the 3 otherwise black hills on the bottom of the image.
// if (x < 0.f) {x=0.f;height=0;}
// else if (x > newProjectorParams.viewportXywh[2])
// {x=newProjectorParams.viewportXywh[2];height=0;}
// if (y < 0.f) {y=0.f;height=0;}
// else if (y > newProjectorParams.viewportXywh[3])
// {y=newProjectorParams.viewportXywh[3];height=0;}
vertex.texCoord[0] = x / texture_w;
vertex.texCoord[1] = y / texture_h;
texCoordGrid[row * cols + col] = vertex.texCoord;
vertexGrid->addVertex(vertex);
maxHeight = qMax(height, maxHeight);
}
}
// Generate grid colors. (Separate from previous loop as we need max height)
for (int row = 0; row <= maxGridY; row++)
{
for (int col = 0; col <= maxGridX; col++)
{
const int cell = row * cols + col;
// Getting/setting each vertex is not that efficient, but we only do this
// at startup.
Vertex vertex = vertexGrid->getVertex(cell);
Vec4f &color(vertex.color);
const float height = heightGrid[cell];
const float gray = (height <= 0.0) ? 0.0 : exp(gamma * log(height / maxHeight));
color[0] = color[1] = color[2] = gray;
color[3] = 1.0f;
vertexGrid->setVertex(cell, vertex);
}
}
constructVertexBuffer(renderer);
delete[] heightGrid;
// FIXME: Comment out with /**/ after testing. --BM
qDebug() << "StelViewportDistorterFisheyeToSphericMirror():"
<< "screen_w:" << this->screenWidth
<< "screen_h:" << this->screenHeight << endl
<< "originalProjectorParams.viewportXywh:"
<< originalProjectorParams.viewportXywh[0]
<< originalProjectorParams.viewportXywh[1]
<< originalProjectorParams.viewportXywh[2]
<< originalProjectorParams.viewportXywh[3] << endl
<< "newProjectorParams.viewportXywh:"
<< newProjectorParams.viewportXywh[0]
<< newProjectorParams.viewportXywh[1]
<< newProjectorParams.viewportXywh[2]
<< newProjectorParams.viewportXywh[3] << endl
<< "originalProjectorParams.fov:"
<< originalProjectorParams.fov << endl
<< "newProjectorParams.fov:" << newProjectorParams.fov << endl
<< "originalProjectorParams.viewportCenter:"
<< originalProjectorParams.viewportCenter[0]
<< originalProjectorParams.viewportCenter[1] << endl
<< "newProjectorParams.viewportCenter:"
<< newProjectorParams.viewportCenter[0]
<< newProjectorParams.viewportCenter[1] << endl
<< "originalProjectorParams.viewportFovDiameter:"
<< originalProjectorParams.viewportFovDiameter << endl
<< "newProjectorParams.viewportFovDiameter:"
<< newProjectorParams.viewportFovDiameter << endl
<< "originalProjectorParams.zNear,zFar:"
<< originalProjectorParams.zNear
<< originalProjectorParams.zFar << endl
<< "newProjectorParams.zNear,zFar:"
<< newProjectorParams.zNear
<< newProjectorParams.zFar << endl
//<< "viewport_texture_offset:"
//<< viewport_texture_offset[0]
//<< viewport_texture_offset[1] << endl
<< "texture_w:" << texture_w << endl
<< "texture_h:" << texture_h << endl
<< "max_x:" << maxGridX << endl
<< "max_y:" << maxGridY;
}
void Atmosphere::computeColor
(double JD, Vec3d sunPos, Vec3d moonPos, float moonPhase, StelCore* core, float eclipseFac,
float latitude, float altitude, float temperature, float relativeHumidity)
{
// We lazily initialize vertex buffer at the first draw,
// so we can only call this after that.
// We also need a renderer reference (again lazily from draw()) to
// construct index buffers as they might change at every call to computeColor().
if(NULL == renderer) {return;}
const StelProjectorP prj = core->getProjection(StelCore::FrameAltAz, StelCore::RefractionOff);
if (viewport != prj->getViewport())
{
// The viewport changed: update the number of points in the grid
updateGrid(prj);
}
eclipseFactor = eclipseFac;
if(eclipseFac < 0.0001f)
eclipseFactor = 0.0001f;
// No need to calculate if not visible
if (!fader.getInterstate())
{
averageLuminance = 0.001f + lightPollutionLuminance;
return;
}
// Calculate the atmosphere RGB for each point of the grid
if (myisnan(sunPos.length()))
sunPos.set(0.,0.,-1.*AU);
if (myisnan(moonPos.length()))
moonPos.set(0.,0.,-1.*AU);
sunPos.normalize();
moonPos.normalize();
float sun_pos[3];
sun_pos[0] = sunPos[0];
sun_pos[1] = sunPos[1];
sun_pos[2] = sunPos[2];
float moon_pos[3];
moon_pos[0] = moonPos[0];
moon_pos[1] = moonPos[1];
moon_pos[2] = moonPos[2];
sky.setParamsv(sun_pos, 5.f);
skyb.setLocation(latitude * M_PI/180., altitude, temperature, relativeHumidity);
skyb.setSunMoon(moon_pos[2], sun_pos[2]);
// Calculate the date from the julian day.
int year, month, day;
StelUtils::getDateFromJulianDay(JD, &year, &month, &day);
skyb.setDate(year, month, moonPhase);
// Variables used to compute the average sky luminance
double sum_lum = 0.;
Vec3d point(1., 0., 0.);
skylightStruct2 b2;
float lumi;
vertexGrid->unlock();
// Compute the sky color for every point above the ground
for (int i=0; i<(1+skyResolutionX)*(1+skyResolutionY); ++i)
{
const Vec2f position = vertexGrid->getVertex(i).position;
prj->unProject(position[0], position[1], point);
Q_ASSERT(fabs(point.lengthSquared()-1.0) < 1e-10);
if (point[2]<=0)
{
point[2] = -point[2];
// The sky below the ground is the symmetric of the one above :
// it looks nice and gives proper values for brightness estimation
}
// Use the Skybright.cpp 's models for brightness which gives better results.
lumi = skyb.getLuminance(moon_pos[0]*point[0]+moon_pos[1]*point[1]+moon_pos[2]*point[2],
sun_pos[0]*point[0]+sun_pos[1]*point[1]+sun_pos[2]*point[2],
point[2]);
lumi *= eclipseFactor;
// Add star background luminance
lumi += 0.0001;
// Multiply by the input scale of the ToneConverter (is not done automatically by the xyYtoRGB method called later)
//lumi*=eye->getInputScale();
// Add the light pollution luminance AFTER the scaling to avoid scaling it because it is the cause
// of the scaling itself
lumi += lightPollutionLuminance;
// Store for later statistics
sum_lum+=lumi;
Q_ASSERT_X(NULL != vertexGrid, Q_FUNC_INFO,
"Vertex buffer not initialized when setting colors");
// Now need to compute the xy part of the color component
// This is done in a GLSL shader if possible
if(NULL != shader)
{
// Store the back projected position + luminance in the input color to the shader
const Vec4f color = Vec4f(point[0], point[1], point[2], lumi);
vertexGrid->setVertex(i, Vertex(position, color));
continue;
}
// Shaderless fallback
if (lumi > 0.01)
{
// Use the Skylight model for the color
b2.pos[0] = point[0];
b2.pos[1] = point[1];
b2.pos[2] = point[2];
sky.getxyYValuev(b2);
}
else
{
// Too dark to see atmosphere color, don't bother computing it
b2.color[0] = 0.25;
b2.color[1] = 0.25;
}
const Vec4f color = Vec4f(b2.color[0], b2.color[1], lumi, 1.0f);
vertexGrid->setVertex(i, Vertex(position, color));
}
vertexGrid->lock();
// Update average luminance
averageLuminance = sum_lum/((1+skyResolutionX)*(1+skyResolutionY));
}
void BookmarksDialog::goToBookmark(QString uuid)
{
if (!uuid.isEmpty())
{
bookmark bm = bookmarksCollection.value(uuid);
if (!bm.jd.isEmpty())
{
core->setJD(bm.jd.toDouble());
}
if (!bm.location.isEmpty())
{
StelLocationMgr* locationMgr = &StelApp::getInstance().getLocationMgr();
core->moveObserverTo(locationMgr->locationForString(bm.location));
}
StelMovementMgr* mvmgr = GETSTELMODULE(StelMovementMgr);
objectMgr->unSelect();
bool status = objectMgr->findAndSelect(bm.name);
float amd = mvmgr->getAutoMoveDuration();
if (!bm.ra.isEmpty() && !bm.dec.isEmpty() && !status)
{
Vec3d pos;
StelUtils::spheToRect(StelUtils::getDecAngle(bm.ra.trimmed()), StelUtils::getDecAngle(bm.dec.trimmed()), pos);
if (bm.name.contains("marker", Qt::CaseInsensitive))
{
// Add a custom object on the sky
GETSTELMODULE(CustomObjectMgr)->addCustomObject(bm.name, pos, bm.isVisibleMarker);
status = objectMgr->findAndSelect(bm.name);
}
else
{
// The unnamed stars
StelObjectP sobj;
const StelProjectorP prj = core->getProjection(StelCore::FrameJ2000);
double fov = 5.0;
if (bm.fov > 0.0)
fov = bm.fov;
mvmgr->zoomTo(fov, 0.0);
mvmgr->moveToJ2000(pos, mvmgr->mountFrameToJ2000(Vec3d(0., 0., 1.)), 0.0);
QList<StelObjectP> candidates = GETSTELMODULE(StarMgr)->searchAround(pos, 0.5, core);
if (candidates.empty()) // The FOV is too big, let's reduce it
{
mvmgr->zoomTo(0.5*fov, 0.0);
candidates = GETSTELMODULE(StarMgr)->searchAround(pos, 0.5, core);
}
Vec3d winpos;
prj->project(pos, winpos);
float xpos = winpos[0];
float ypos = winpos[1];
float best_object_value = 1000.f;
for (const auto& obj : candidates)
{
prj->project(obj->getJ2000EquatorialPos(core), winpos);
float distance = std::sqrt((xpos-winpos[0])*(xpos-winpos[0]) + (ypos-winpos[1])*(ypos-winpos[1]));
if (distance < best_object_value)
{
best_object_value = distance;
sobj = obj;
}
}
if (sobj)
status = objectMgr->setSelectedObject(sobj);
}
}
if (status)
{
const QList<StelObjectP> newSelected = objectMgr->getSelectedObject();
if (!newSelected.empty())
{
mvmgr->moveToObject(newSelected[0], amd);
mvmgr->setFlagTracking(true);
}
}
}
}
double StelGeodesicGridDrawer::draw(StelCore* core, int maxSearchLevel)
{
const StelProjectorP prj = core->getProjection();
StelPainter sPainter(prj);
StelGeodesicGrid* geodesicGrid = core->getGeodesicGrid();
const GeodesicSearchResult* geodesic_search_result = geodesicGrid->search(prj->unprojectViewport(), maxSearchLevel);
glDisable(GL_TEXTURE_2D);
glEnable(GL_BLEND);
glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA); // Normal transparency mode
core->setCurrentFrame(StelCore::FrameJ2000); // set 2D coordinate
sPainter.setColor(0.2,0.3,0.2);
int lev = (int)(7./pow(prj->getFov(), 0.4))+2;
if (lev>geodesicGrid->getMaxLevel())
lev = geodesicGrid->getMaxLevel();
lev = maxSearchLevel;
Vec3d win1, win2;
int index;
Vec3d v0, v1, v2;
{
GeodesicSearchInsideIterator it1(*geodesic_search_result, lev);
while((index = it1.next()) >= 0)
{
Vec3d center(0);
geodesicGrid->getTriangleCorners(lev, index, v0, v1, v2);
prj->project(v0, win1);
prj->project(v1, win2);
center += win1;
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
prj->project(v1, win1);
prj->project(v2, win2);
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
center += win1;
prj->project(v2, win1);
prj->project(v0, win2);
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
center += win1;
center*=0.33333;
QString str = QString("%1 (%2)").arg(index)
.arg(geodesicGrid->getPartnerTriangle(lev, index));
glEnable(GL_TEXTURE_2D);
prj->drawText(font,center[0]-6, center[1]+6, str);
glDisable(GL_TEXTURE_2D);
}
}
GeodesicSearchBorderIterator it1(*geodesic_search_result, lev);
while((index = it1.next()) >= 0)
{
Vec3d center(0);
geodesicGrid->getTriangleCorners(lev, index, v0, v1, v2);
prj->project(v0, win1);
prj->project(v1, win2);
center += win1;
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
prj->project(v1, win1);
prj->project(v2, win2);
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
center += win1;
prj->project(v2, win1);
prj->project(v0, win2);
sPainter.drawLine2d(win1[0],win1[1], win2[0],win2[1]);
center += win1;
center*=0.33333;
QString str = QString("%1 (%2)").arg(index)
.arg(geodesicGrid->getPartnerTriangle(lev, index));
glEnable(GL_TEXTURE_2D);
prj->drawText(font,center[0]-6, center[1]+6, str);
glDisable(GL_TEXTURE_2D);
}
return 0.;
}