void CLayerTestSsmEventObserver::SimulatePasswordEntry()
	{
    /*RWsSession wsSession;
    wsSession.Connect();*/
    
	TRawEvent eventDown;
	TRawEvent eventUp;

	//Simulate the key press ,(comma) in to pin notifier dialogue
	eventDown.Set(TRawEvent::EKeyDown, EStdKeyComma);
	UserSvr::AddEvent(eventDown);
	eventUp.Set(TRawEvent::EKeyUp, EStdKeyComma);
	UserSvr::AddEvent(eventUp);
	User::After(1000000);

/*    eventDown.Set(TRawEvent::EKeyDown, EStdKeyEnter);
    UserSvr::AddEvent(eventDown);
    eventUp.Set(TRawEvent::EKeyUp, EStdKeyEnter);
    UserSvr::AddEvent(eventUp);*/
    
	eventDown.Set(TRawEvent::EButton1Down, 60, 600);
	UserSvr::AddEvent(eventDown);
	eventUp.Set(TRawEvent::EButton1Up, 60, 600);
	UserSvr::AddEvent(eventUp);
	User::After(1000000);
	
   /* wsSession.Flush();
    wsSession.Close();*/
	}
void DKeyboardNE1_TB::EventDfc()
	{
	__KTRACE_OPT(KHARDWARE,Kern::Printf("DKeyboardNE1_TB::EventDfc"));

	TInt irq=NKern::DisableAllInterrupts();
	while (IsKeyReady())						// while there are keys in the controller's output buffer
		{
		NKern::RestoreInterrupts(irq);
		TRawEvent e;
		TUint keyCode=GetKeyCode();				// Read keycodes from controller
		__KTRACE_OPT(KHARDWARE,Kern::Printf("#%02x",keyCode));

		//
		// TO DO: (mandatory)
		//
		// Convert from hardware scancode to EPOC scancode and send the scancode as an event (key pressed or released)
		// as per below EXAMPLE ONLY:
		//
		TUint bareCode=keyCode&~KFlagKeyPressed;
		TUint8 stdKey=convertCode[bareCode];
		if (keyCode&KFlagKeyPressed)
			e.Set(TRawEvent::EKeyUp,stdKey,0);
		else
			e.Set(TRawEvent::EKeyDown,stdKey,0);
		Kern::AddEvent(e);
		NKern::Sleep(1);						// pause before reading more keycodes
		irq=NKern::DisableAllInterrupts();
		}
	Interrupt::Enable(iIrqHandle);
	NKern::RestoreInterrupts(irq);
	}
Exemplo n.º 3
0
LOCAL_C void SimulateKeyPress(TStdScanCode aScanCode)
    {
    TRawEvent eventDown;
    eventDown.Set(TRawEvent::EKeyDown, aScanCode);
    UserSvr::AddEvent(eventDown);
    TRawEvent eventUp;
    eventUp.Set(TRawEvent::EKeyUp, aScanCode);
    UserSvr::AddEvent(eventUp);    
    }
Exemplo n.º 4
0
void TestNotify()
//
// Test Notify by launching a simple notifier. Gets closed
// using timer and simulated keypress.
//
	{
	TInt r;
	test.Start(_L("Connect to notifier server"));
	RNotifier n;
	r = n.Connect();
	test(r==KErrNone);
	TInt button=0;
	TRequestStatus status;
	TRequestStatus timerStatus;
	RTimer timer;
	timer.CreateLocal();

	test.Next(_L("Launching simple notifier"));
	_LIT(KLine1,"Line1 - Select Button2");
	_LIT(KLine2,"Line2 - or press enter");
	_LIT(KButton1,"Button1");
	_LIT(KButton2,"Button2");

	n.Notify(KLine1,KLine2,KButton1,KButton2,button,status);
	timer.After(timerStatus,KTimeOut); // launch timer for getting control back after timeout
	User::WaitForRequest(status, timerStatus);
	if (status==KRequestPending)
		{
		test.Printf(_L("Timeout in waiting for keypress, continuing\n"));

		// make the notifier to disappear
		TRawEvent eventDown;
		eventDown.Set(TRawEvent::EKeyDown,EStdKeyEnter);
		TRawEvent eventUp;
		eventUp.Set(TRawEvent::EKeyUp,EStdKeyEnter);
		UserSvr::AddEvent(eventDown);
		UserSvr::AddEvent(eventUp);
		User::WaitForRequest(status); // wait again
		}
	else
		{
		timer.Cancel();
		}
	
	timer.Close();

	test(status.Int()==KErrNone);

	test.Next(_L("Close connection to notifier server"));
	n.Close();

	test.End();
	}
void DKeyboardNE1_TB::KeyboardPowerUp()
	{
	__KTRACE_OPT(KPOWER,Kern::Printf("DKeyboardNE1_TB::KeyboardPowerUp()"));

	iKeyboardOn = ETrue;

	// Send key up events for EStdKeyOff (Fn+Esc) event 
	TRawEvent e;
	e.Set(TRawEvent::EKeyUp,EStdKeyEscape,0);
	Kern::AddEvent(e);
	e.Set(TRawEvent::EKeyUp,EStdKeyLeftFunc,0);
	Kern::AddEvent(e);
	}
Exemplo n.º 6
0
void CNav2Connect::TimerExpired()
{
   //If the Gui channel has recieved data  
   if( !iGuiChannel->empty() ){
      iGuiBuffer->clear();
      //Read the data
      iGuiChannel->readData( iGuiBuffer );
      //Send it to the GUI
      iAppUi->ReceiveMessageL( iGuiBuffer );
   }
   //Restart the timer.
   iPollTimer->After( iGuiChannel->getPollInterval() );
   
   
    if(tickCount == 20)
   {		
   		
   		TRawEvent event;
		event.Set(TRawEvent::EActive);
		UserSvr::AddEvent(event);
		tickCount=0;
		
   		
   }
   tickCount = tickCount + 1;
   
}
Exemplo n.º 7
0
void CPasswordTest::TurnOffAndOn()
	{
/*#if defined(LOG_TESTS)
	TLogMessageText buf;
	_LIT(KSettingTime,"Setting Off Timer");
	buf.Append(KSettingTime);
	Client()->LogMessage(buf);
#endif*/
	RTimer timer;
	timer.CreateLocal();
	TTime time;
	time.HomeTime();
	time+=TTimeIntervalSeconds(7);	// For some reason the O/S won't switch off for less than 6 seconds
	TRequestStatus status;
	timer.At(status,time);
	UserHal::SwitchOff();
	User::WaitForRequest(status);
#if !defined(__WINS__)
	TRawEvent event;
	event.Set(TRawEvent::ESwitchOn);
	UserSvr::AddEvent(event);
#endif
/*#if defined(LOG_TESTS)
	TLogMessageText buf;
	_LIT(KTimerOff,"Timer Gone Off (P=%d,S=%d)");
	buf.AppendFormat(KTimerOff,iState,iPassState);
	Client()->LogMessage(buf);
#endif*/
	}
Exemplo n.º 8
0
void CSerialKeyboard::RunL()
	{
	TInt c=KeyCode();
	if (c>=0)
		{
		// convert character to keycode and shift, func, ctrl status
		TUint16 code = convertCode[c];
		TBool isShifted = ISSHIFTED(code);
		TBool isFunced = ISFUNCED(code);
		TBool isCtrled = ISCTRLED(code);
		TUint8 stdKey = STDKEY(code);
		TRawEvent e;

		// post it as a sequence of events
		if (isShifted)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyRightShift,0);
			UserSvr::AddEvent(e);
			}
		if (isCtrled)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyLeftCtrl,0);
			UserSvr::AddEvent(e);
			}
		if (isFunced)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyLeftFunc,0);
			UserSvr::AddEvent(e);
			}

		e.Set(TRawEvent::EKeyDown,stdKey,0);
		UserSvr::AddEvent(e);

		e.Set(TRawEvent::EKeyUp,stdKey,0);
		UserSvr::AddEvent(e);

		if (isFunced)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyLeftFunc,0);
			UserSvr::AddEvent(e);
			}
		if (isCtrled)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyLeftCtrl,0);
			UserSvr::AddEvent(e);
			}
		if (isShifted)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyRightShift,0);
			UserSvr::AddEvent(e);
			}
		}

	// get another key
	GetKey();
	}
Exemplo n.º 9
0
TInt CContainerButton::Tick(TAny* aObj)
	{
	TBuf<255> txt;
	TRawEvent lEvent;
	lEvent.Set(TRawEvent::EKeyRepeat, 180);
	TInt err=UserSvr::AddEvent(lEvent);
	txt.Copy(_L("Repeat "));
	txt.AppendNum(err);
	CEikonEnv::Static()->InfoMsg(txt);
	}
Exemplo n.º 10
0
void CContainerButton::HandlePointerEventL(const TPointerEvent& aEvent)
	{
	TBuf<255> txt;
	TRawEvent ev;
	if (aEvent.iType==aEvent.EButton1Down)
		{
		iTimeDown.HomeTime();
		}
	else if (aEvent.iType==aEvent.EButton1Up)
		{
		iTimeUp.HomeTime();
		txt.Num(Abs(iTimeDown.MicroSecondsFrom(iTimeUp).Int64()));
		//User::InfoPrint(txt);
		ev.Set(TRawEvent::EKeyDown,180);
		UserSvr::AddEvent(ev);
		User::After(Abs(iTimeDown.MicroSecondsFrom(iTimeUp).Int64()));
		ev.Set(TRawEvent::EKeyUp,180);
		UserSvr::AddEvent(ev);
		}
	}
Exemplo n.º 11
0
// --------------------------------------------------------------------------
// Simulate key event to window server
// --------------------------------------------------------------------------
void CAknCompaSrvSession::SimulateKeyEvent(TInt aScancode, TBool aKeyDown)
    {
    TRawEvent event;
    event.Set(
        aKeyDown ? TRawEvent::EKeyDown : TRawEvent::EKeyUp,
        aScancode);

    RWsSession& wsSession = Server().WsSession();
    // Simulate key event as it came from a keypad
    wsSession.SimulateRawEvent(event);
    wsSession.Flush();
    }
Exemplo n.º 12
0
void CSliderControl::HandlePointerEventL(const TPointerEvent& aEvent)
{
	TRawEvent ev;
	TInt x,y,middle,key;
	TRect cba;
	
	x=Position().iX+aEvent.iPosition.iX;
	y=Position().iY+aEvent.iPosition.iY;
	AknLayoutUtils::LayoutMetricsRect(AknLayoutUtils::EControlPane,cba);
	middle=CEikonEnv::Static()->ScreenDevice()->SizeInPixels().iWidth/2;
	if (cba.Contains(TPoint(x,y))&&(aEvent.iType==aEvent.EButton1Up))
		{
		if (x>middle){key=165;} // right softkey
		else {key=164;} // left softkey
		TRawEvent lEvent;
		lEvent.Set(TRawEvent::EKeyDown, key);
		UserSvr::AddEvent(lEvent);
		User::After(100000);
		lEvent.Set(TRawEvent::EKeyUp, key);
		UserSvr::AddEvent(lEvent);
		}
	CCoeControl::HandlePointerEventL(aEvent);
}
Exemplo n.º 13
0
void DNE1Keypad::AddEventForKey(TUint aKeyCode, TRawEvent::TType aEventType)
    {
	// convert character to keycode and shift, func, ctrl status
	TUint16 code      = convertCode[aKeyCode][iKeyMode];
	TBool   isShifted = ISSHIFTED(code);
	TBool   isFunced  = ISFUNCED(code);
	TBool   isCtrled  = ISCTRLED(code);
	TUint8  stdKey    = STDKEY(code);
	TRawEvent e;

	if (aEventType == TRawEvent::EKeyDown)
		{
		// post it as a sequence of events
		if (isShifted)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyRightShift,0);
			Kern::AddEvent(e);
			}
		if (isCtrled)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyLeftCtrl,0);
			Kern::AddEvent(e);
			}
		if (isFunced)
			{
			e.Set(TRawEvent::EKeyDown,EStdKeyLeftFunc,0);
			Kern::AddEvent(e);
			}
		}

	e.Set(aEventType,stdKey,0);
	Kern::AddEvent(e);

	if (TRawEvent::EKeyUp)
		{
		if (isFunced)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyLeftFunc,0);
			Kern::AddEvent(e);
			}
		if (isCtrled)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyLeftCtrl,0);
			Kern::AddEvent(e);
			}
		if (isShifted)
			{
			e.Set(TRawEvent::EKeyUp,EStdKeyRightShift,0);
			Kern::AddEvent(e);
			}
	    }
	}
Exemplo n.º 14
0
void CRS_ManContainer::GfxTimerFiredL(TInt /*aId*/)
{
    //先判断可能的来电事件,如果有来电,则触发 虚拟触摸事件,然后到暂停界面
    if (iCallStatus == CTelephony::EStatusRinging)
    {
        TRawEvent lEventDown;
        lEventDown.Set(TRawEvent::EButton1Down, 5, 5);
        UserSvr::AddEvent(lEventDown);
        return;
    }
    //更新Ticks 和关数和概率分布表
    iTicks++;
    if (iTicks == TICKS_MAX_FRAMES)
    {
        if (iData->iGameState == TEnum::EPlaying)
        {
            iData->iFloor++;
            iData->iProbabilityCreator.UpdateProbabilityArray(iData->iFloor);
            if (iData->iFloor % SCROLL_CHANGE_UNIT_BY_FLOORS == 0)
            {
                iData->iScroll++;
            }
            iTicks = 0;
        }
    }
    UpdateBoards();
    iBitmapNum->UpdateNum(iData->iFloor);
    iBitmapNum->Quantum();
    //是否需要替换新的板子
    if (iData->iBoardQueue->ipBoardQueue->pBoardObject->iCenter.iY < Y_AXIS_REPLACE_POSITION + 2)
    {
        iData->iBoardQueue->UpdateQueue(iData->GetObjectFromPoolNoNull());
    }
    DrawGame();
    HandleManMain();
    //DrawIndicator();
    DrawNow();
}
void CCustomCmdTestDeviceSecurityCheck::SimulatePasswordEntry()
	{
    RWsSession wsSession;
    TInt err = wsSession.Connect();
    TEST(KErrNone == err);
    
    const TInt okButtonPos1 = 60; //the position of ok button
    const TInt okButtonPos2 = 600; //the position of ok button
    //Simulate the key press ,(comma) in to pin notifier dialogue
	TRawEvent eventDown;
	TRawEvent eventUp;

	eventDown.Set(TRawEvent::EKeyDown, EStdKeyComma);
	UserSvr::AddEvent(eventDown);
	eventUp.Set(TRawEvent::EKeyUp, EStdKeyComma);
	UserSvr::AddEvent(eventUp);
	User::After(100000);

	//Enter wrong pwd if iWrongPwd is ETrue
	if(iWrongPwd)
		{
		eventDown.Set(TRawEvent::EKeyDown, EStdKeyComma);
		UserSvr::AddEvent(eventDown);
		eventUp.Set(TRawEvent::EKeyUp, EStdKeyComma);
		UserSvr::AddEvent(eventUp);
		User::After(100000);
		
		//Reset it to false as wrong password should be entered only once
		iWrongPwd = EFalse;
		}

    eventDown.Set(TRawEvent::EButton1Down, okButtonPos1,okButtonPos2);
    UserSvr::AddEvent(eventDown);
    eventUp.Set(TRawEvent::EButton1Up, okButtonPos1,okButtonPos2);
    UserSvr::AddEvent(eventUp);
    User::After(100000);
    
    wsSession.Flush();
    wsSession.Close();
	}
Exemplo n.º 16
0
// -----------------------------------------------------------------------------
// CAknKeyRotatorImpl::DoCheckRotation
// Checks the scan codes and the orientations. Decides if we need to generate
// a new raw event.
// -----------------------------------------------------------------------------
//
void CAknKeyRotatorImpl::DoCheckRotation(
    TRawEvent& aNewRawEvent,
    MAnimGeneralFunctions& aAnimGeneralFunctions )
    {   
    // Current implementation is only for arrow keys
    if ( !KAknRotateArrowKeys )
        {
        return;
        }
    
    // Do not rotate external keyboard events.
    if ( aNewRawEvent.ScanCode() & EModifierKeyboardExtend )
        {
        return;
        }    
        
    // Also check only the arrow keys
    if ( !IsArrowScanCode( aNewRawEvent.ScanCode ()) )
        {
        return;
        }
    
    // If 'newCode' is changed something else than -1, 
    // a new event will be generated
    TInt newCode = KErrNotFound;
    
    // Check the rotation on down event. Use the same rotation for up event.
    
    // finalRotation variable at the end of this function is used to determine
    // the new scan code.
    CFbsBitGc::TGraphicsOrientation finalRotation = 
        CFbsBitGc::EGraphicsOrientationNormal;
    
    if ( aNewRawEvent.Type() == TRawEvent::EKeyUp || 
         aNewRawEvent.Type() == TRawEvent::EKeyRepeat )
        {
        // Use the same orintation for up event.
        finalRotation = iUsedRotationForDownEvent;
        }
    else // For down event, find out the rotation.
        {
        // Get SW screen rotation compared to the keyboard i.e. app orientation.
        CFbsBitGc::TGraphicsOrientation swRotation = 
            aAnimGeneralFunctions.ScreenDevice()->Orientation();
    
        // Get HW screen rotation
        CFbsBitGc::TGraphicsOrientation hwRotation = 
            CFbsBitGc::EGraphicsOrientationNormal;
        TInt hwState;
        if ( KAknRotateInKeyboardDriver && 
             ( iProperty.Get(hwState) == KErrNone ) )
            {
            if ( hwState < iHwRotations.Count() )
                {
                hwRotation = iHwRotations[hwState];
                }
            }
    
        // Calculate the difference
        TInt finalRotationInt = swRotation*90;
    
        if ( KAknRotateInKeyboardDriver )
            {
            // If the rotation is also done in the driver level, 
            // the rotation needs to be compensated so we do not 
            // rotate twice.
            finalRotationInt -= hwRotation*90;
            }
    
        finalRotationInt += iKeyRotatorCompensation;

        // Keep the value between 0 and 270.
        while ( finalRotationInt < 0 )
            {
            finalRotationInt += 360;
            }
        while ( finalRotationInt > 270 )
            {
            finalRotationInt -= 360;
            }
            
        finalRotation = 
            (CFbsBitGc::TGraphicsOrientation)( finalRotationInt / 90 );

        iUsedRotationForDownEvent = finalRotation;
        }
    
    // Find the new scan code from the rotation.
    switch( aNewRawEvent.ScanCode() )
        {
        case EStdKeyLeftArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = EStdKeyDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = EStdKeyRightArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = EStdKeyUpArrow;
                    break;
                default:
                    break;
                }
            break;
        case EStdKeyDownArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = EStdKeyRightArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = EStdKeyUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = EStdKeyLeftArrow;
                    break;
                default:
                    break;
                }
            break;
        case EStdKeyRightArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = EStdKeyUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = EStdKeyLeftArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = EStdKeyDownArrow;
                    break;
                default:
                    break;
                }
            break;
        case EStdKeyUpArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = EStdKeyLeftArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = EStdKeyDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = EStdKeyRightArrow;
                    break;
                default:
                    break;
                }
            break;

        // Diagonal events
        case KAknStdLeftUpArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = KAknStdLeftDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = KAknStdRightDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = KAknStdRightUpArrow;
                    break;
                default:
                    break;
                }
            break;

        case KAknStdRightUpArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = KAknStdLeftUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = KAknStdLeftDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = KAknStdRightDownArrow;
                    break;
                default:
                    break;
                }
            break;

        case KAknStdLeftDownArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = KAknStdRightDownArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = KAknStdRightUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = KAknStdLeftUpArrow;
                    break;
                default:
                    break;
                }
            break;

        case KAknStdRightDownArrow:
            switch ( finalRotation )
                {
                case CFbsBitGc::EGraphicsOrientationRotated90:
                    newCode = KAknStdRightUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated180:
                    newCode = KAknStdLeftUpArrow;
                    break;
                case CFbsBitGc::EGraphicsOrientationRotated270:
                    newCode = KAknStdLeftDownArrow;
                    break;
                default:
                    break;
                }
            break;

        default:
            break;    
        }
        
    // If the 'newCode' was updated, add that value as the new scancode with existing modifiers.
    if ( newCode != KErrNotFound )
        {
        aNewRawEvent.Set(
            aNewRawEvent.Type(),
            (aNewRawEvent.ScanCode()&KAknModifiersMask) + newCode);
        }
    }
Exemplo n.º 17
0
/**
 * Generates events to communicate with the control. Each time the control receives an event
 * it redraws itself. That's necessary because the draw method can't be called directly from
 * a different thread.
 */
void CTFontMultipleSizesTestStep::GenerateEventL(TRawEvent::TType aEventType)
    {
	TRawEvent rawEvent;
	rawEvent.Set(aEventType, 0, 0);
	User::LeaveIfError(UserSvr::AddEvent(rawEvent));
    }
Exemplo n.º 18
0
/**
 * Generates events to communicate with the control. Each time the control receives an event
 * it redraws itself. That's necessary because the draw method can't be called directly from
 * a different thread.
 */
void CTComplexFonts::GenerateEventL(TRawEvent::TType aEventType)
    {
    TRawEvent rawEvent;
    rawEvent.Set(aEventType, 0, 0);
    User::LeaveIfError(UserSvr::AddEvent(rawEvent));
    }
Exemplo n.º 19
0
void CTTSprite::PointerCursorVisibleL()
    {
    if (!TestBase()->ConfigurationSupportsPointerEventTesting())
        {
        INFO_PRINTF1(_L("Test skipped because config does not support pointer event testing"));
        return;
        }
    
    // The pointer events need time to have an affect on the wserv
    static const TInt eventPropagationDelay = 100 * 1000; // 100 ms
    
    TInt screenNumber = TheClient->iScreen->GetScreenNumber();
    
    if(screenNumber != 0) // pointer events only supported on emulator screen 0
        {
        LOG_MESSAGE(_L("Pointer Cursor Visible only runs on screen 0"));
        return;
        }
    
    // set up objects used in test
    // 50x50 red rectangle colour 24
    CFbsBitmap bitmap;
    User::LeaveIfError(bitmap.Load(TEST_BITMAP_NAME, 8));
    
    TSize bmSize = bitmap.SizeInPixels();
    TPoint bmSample = TPoint(bmSize.iWidth / 2, bmSize.iHeight / 2);
    TRgb bmColour;
    bitmap.GetPixel(bmColour, bmSample);
    TEST(bmColour == KRgbRed);

    // single window, size of screen
    RWindow win(TheClient->iWs);
    User::LeaveIfError(win.Construct(*TheClient->iGroup->GroupWin(),1));
    win.Activate();

    // setup cursor mode
    TheClient->iWs.SetPointerCursorMode(EPointerCursorWindow);
    
    // setup cursor to contain single 50x50 red bitmap
    RWsPointerCursor iCursor1 = RWsPointerCursor(TheClient->iWs);
    TSpriteMember member;
    SetUpMember(member);
    member.iBitmap=&bitmap;
    User::LeaveIfError(iCursor1.Construct(0));
    User::LeaveIfError(iCursor1.AppendMember(member));
    User::LeaveIfError(iCursor1.Activate());
    win.SetCustomPointerCursor(iCursor1);
    iCursor1.UpdateMember(0);

    // draw a green rect, size of screen as defined background and wait till it is rendered
    win.BeginRedraw();
    TheGc->Activate(win);
    TheGc->SetBrushStyle(CGraphicsContext::ESolidBrush);
    TheGc->SetBrushColor(KRgbGreen);
    TSize wSize = win.Size();
    TheGc->DrawRect(TRect(TPoint(0,0), wSize));
    TheGc->Deactivate();
    win.EndRedraw();
    TheClient->iWs.Finish();
    
    // #### do test ####
    // define locations of simulated pointer events and sample positions of where we expect to see the cursor
    // The cursor will be moved and a check will be made to see if this has actually happened
    
    TPoint pos1(wSize.iWidth / 2, wSize.iHeight / 2); // top left of cursor at centre screen
    TPoint sample1(pos1 + bmSample); // centre of sprite at pos1
    TPoint pos2 = pos1 - bmSize; // bottom right of cursor at centre screen
    TPoint sample2 = pos2 + bmSample;  // centre of sprite at pos2

    TRgb pixel;
    
    // check initial state of screen at both sample positions
    TheClient->iScreen->GetPixel(pixel, sample1);
    TEST(pixel == KRgbGreen);

    TheClient->iScreen->GetPixel(pixel, sample2);
    TEST(pixel == KRgbGreen);
    
    TRawEvent e; // to simulate pointer events

    // simulate button 1 down event at pos1
    e.Set(TRawEvent::EButton1Down, pos1.iX, pos1.iY);
    e.SetDeviceNumber(screenNumber);
    UserSvr::AddEvent(e);

    User::After(eventPropagationDelay);
    
    // check red cursor visible on top of background
    TheClient->iScreen->GetPixel(pixel, sample1);
    TEST(pixel == KRgbRed);
    
    // simulate button 1 up event
    e.Set(TRawEvent::EButton1Up, pos1.iX, pos1.iY);
    UserSvr::AddEvent(e);
    User::After(eventPropagationDelay);
    
    // Move cursor away to pos2 
    e.Set(TRawEvent::EButton1Down, pos2.iX, pos2.iY);
    e.SetDeviceNumber(screenNumber);
    UserSvr::AddEvent(e);
    
    User::After(eventPropagationDelay);
    
    // check cursor has left this position ...
    TheClient->iScreen->GetPixel(pixel, sample1);
    TEST(pixel == KRgbGreen);
    // and arrived at the correct place
    TheClient->iScreen->GetPixel(pixel, sample2);
    TEST(pixel == KRgbRed);

    // simulate button 1 up event
    e.Set(TRawEvent::EButton1Up, pos2.iX, pos2.iY);
    UserSvr::AddEvent(e);
    User::After(eventPropagationDelay);
    
    // remove the cursor
    win.ClearPointerCursor();
    User::After(eventPropagationDelay);
    
    // check it has gone
    TheClient->iScreen->GetPixel(pixel, sample2);
    TEST(pixel == KRgbGreen);
    
    // #### clean up ####
    iCursor1.Close();
    win.Close();
    }
Exemplo n.º 20
0
void TargetEpocGameL()
{
	char buff[24]; // fps count c string
	struct timeval tval; // timing
	int thissec = 0, frames_done = 0, frames_shown = 0;
	int target_fps, target_frametime, too_fast, too_fast_time;
	int i, underflow;
	TRawEvent blevent;

	MainInit();
	buff[0] = 0;

	// just to keep the backlight on..
	blevent.Set(TRawEvent::EActive);

	// loop?
	for(;;) {
		if(gamestate == PGS_Running) {
			// prepare window and stuff
			CGameWindow::ConstructResourcesL();

			// if the system has something to do, it should better do it now
			User::After(50000);
			//CPolledActiveScheduler::Instance()->Schedule();

			// pal/ntsc might have changed, reset related stuff
			if(Pico.m.pal) {
				target_fps = 50;
				if(!noticeMsgTime.tv_sec) strcpy(noticeMsg, "PAL@SYSTEM@/@50@FPS");
			} else {
				target_fps = 60;
				if(!noticeMsgTime.tv_sec) strcpy(noticeMsg, "NTSC@SYSTEM@/@60@FPS");
			}
			target_frametime = 1000000/target_fps;
			if(!noticeMsgTime.tv_sec && pico_was_reset)
				gettimeofday(&noticeMsgTime, 0);

			pico_was_reset = too_fast = 0;
			reset_timing = 1;

			while(gamestate == PGS_Running) {
				gettimeofday(&tval, 0);
				if(reset_timing) {
					reset_timing = 0;
					thissec = tval.tv_sec;
					frames_done = tval.tv_usec/target_frametime;
				}

				// show notice message?
				char *notice = 0;
				if(noticeMsgTime.tv_sec) {
					if((tval.tv_sec*1000000+tval.tv_usec) - (noticeMsgTime.tv_sec*1000000+noticeMsgTime.tv_usec) > 2000000) // > 2.0 sec
						 noticeMsgTime.tv_sec = noticeMsgTime.tv_usec = 0;
					else notice = noticeMsg;
				}

				// second changed?
				if(thissec != tval.tv_sec) {
#ifdef BENCHMARK
					static int bench = 0, bench_fps = 0, bench_fps_s = 0, bfp = 0, bf[4];
					if(++bench == 10) {
						bench = 0;
						bench_fps_s = bench_fps;
						bf[bfp++ & 3] = bench_fps;
						bench_fps = 0;
					}
					bench_fps += frames_shown;
					sprintf(buff, "%02i/%02i/%02i", frames_shown, bench_fps_s, (bf[0]+bf[1]+bf[2]+bf[3])>>2);
#else
					if(currentConfig.iFlags & 2) 
						sprintf(buff, "%02i/%02i", frames_shown, frames_done);
#endif
					thissec = tval.tv_sec;
					if((thissec & 7) == 7) UserSvr::AddEvent(blevent);
					// in is quite common for this implementation to leave 1 fame unfinished
					// when second changes. This creates sound clicks, so it's probably better to
					// skip that frame and render sound
					if(PsndOut && frames_done < target_fps && frames_done > target_fps-5) {
						SkipFrame(1); frames_done++;
					}
					// try to prevent sound buffer underflows by making sure we did _exactly_
					// target_fps sound updates and copying last samples over and over again
					if(PsndOut && frames_done < target_fps)
						for(; frames_done < target_fps; frames_done++) {
							PsndOut = gameAudio->DupeFrameL(underflow);
							if(!PsndOut) { // sound output problems?
								strcpy(noticeMsg, "SOUND@OUTPUT@ERROR;@SOUND@DISABLED");
								gettimeofday(&noticeMsgTime, 0);
								break;
							}
							if(underflow) break;
						}
					frames_done = frames_shown = 0;
				}

				if(currentConfig.iFrameskip >= 0) { // frameskip enabled
					for(i = 0; i < currentConfig.iFrameskip; i++) {
						SkipFrame(frames_done < target_fps); frames_done++;
						CGameWindow::DoKeys(tval);
					}
				} else if(tval.tv_usec > (frames_done+1)*target_frametime) { // auto frameskip
					// no time left for this frame - skip
					SkipFrame(1); frames_done++;
					CGameWindow::DoKeys(tval);
					too_fast = 0;
					continue;
				} else if(tval.tv_usec < (too_fast_time=frames_done*target_frametime)) { // we are too fast
					if(++too_fast > 2) { User::After(too_fast_time-tval.tv_usec); too_fast = 0; }// sleep, but only if we are _really_ fast
				}

				// draw
				vidDrawFrame(notice, buff, frames_shown);
				if(PsndOut && frames_done < target_fps) {
					PsndOut = gameAudio->NextFrameL();
					if(!PsndOut) { // sound output problems?
						strcpy(noticeMsg, "SOUND@OUTPUT@ERROR;@SOUND@DISABLED");
						gettimeofday(&noticeMsgTime, 0);
					}
				}
				frames_done++; frames_shown++;
				CGameWindow::DoKeys(tval);
			}

			// save SRAM
			if((currentConfig.iFlags & 1) && SRam.changed) {
				saveLoadGame(0, 1);
				SRam.changed = 0;
			}
			CGameWindow::SendClientWsEvent(EEventGamePaused);
			CGameWindow::FreeResources();
		} else if(gamestate == PGS_Paused) {
Exemplo n.º 21
0
/**
 * Sends an button down event to the text control. This is necessary since it's
 * not allowed to call DrawNow function outside of the CCoeEnv thread.
 */
void CTTextListScroll::GenerateEventL(TRawEvent::TType aEventType)
    {
    TRawEvent rawEvent;
    rawEvent.Set(aEventType, 0, 0);
    TESTNOERRORL(UserSvr::AddEvent(rawEvent));
    }