void ECCalibrateScreen::highCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Calibrate now with the high side liquid", LEFT, 30);
myUTFT.print("Place the sensor in the 3,000Us ", LEFT, 42);
myUTFT.print("calibration liquid. This process", LEFT, 54);
myUTFT.print("will take 5 minutes to complete", LEFT, 66);
myUTFT.print("Wait for process to finish before ", LEFT, 78);
myUTFT.print("removing the sensor from the liquid", LEFT, 90);
myUTFT.print("", LEFT, 102);
myUTFT.print("************************************", LEFT, 114);
myUTFT.print("Touch screen to continue", CENTER, 162);
waitForTouch();
myUTFT.clrScr();
inputstring = "C\r"; //set in continious mode
myUTFT.clrScr();
String thisSt = String(iSeconds);
myUTFT.print("Calibration in Progress", CENTER, 30);
myUTFT.print("Seconds left until ready " + thisSt, CENTER, 42);
simpleTimer.setTimer(3000, updateWaitScreen, /*100*/ 4); //Update screen every 3 seconds for 5 minues.
}
void ECCalibrateScreen::SdrawScreen()
{
myUTFT.clrScr();
myUTFT.setBackColor(0, 0, 255);
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLUE);
myButtons.addButton( 10, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 10, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 64, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 116, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 10, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.addButton( 160, 170, MAIN_BUTTON_X, MAIN_BUTTON_Y, mainButton);
myButtons.drawButtons();
//Add text to buttons.
myUTFT.setBackColor (161,190,237);
myUTFT.print("Reset", 55, 30);
myUTFT.print("Info", 190, 30);
myUTFT.print("Read", 55, 90);
myUTFT.print("TRead", 190, 90);
myUTFT.print("Stop", 55, 146);
myUTFT.print("Start", 190, 146);
myUTFT.print("Back", 55, 195);
myUTFT.print("Calibrate", 185, 195);
}
void PlugScreen::drawPrepareScreen()
{
Serial.println("PlugScreen::handlePlugScreen SET LIGHTS ID \n");
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("Plug Setting", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Use the remote that came with your", LEFT, 30);
myUTFT.print("plugs to set which unit and address it", LEFT, 42);
myUTFT.print("uses.Just point the remote at the screen", LEFT, 54);
myUTFT.print("and press a button for the unit you want", LEFT, 66);
myUTFT.print("to use for the lights", LEFT, 78);
myUTFT.print("", LEFT, 90);
myUTFT.print("Please press a unit for the lights", LEFT, 102);
myUTFT.print("", LEFT, 114);
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Cancel", 55, 195);
myUTFT.setFont(BigFont);
}
void PlugScreen::drawScreen( )
{
//Clear What was there.
myUTFT.clrScr();
resetButtons();
myUTFT.setBackColor (0, 0, 0);
myUTFT.print("Plug Setup", CENTER, 1);
myUTFT.setBackColor(0, 0, 255);
//Draw Lights button
lightsButton = myButtons.addButton( 10, 54, 145, 53, mainButton);
myButtons.drawButton(lightsButton);
myUTFT.print("Lights", 35, 71);
heaterButton = myButtons.addButton( 10, 110, 145, 53, mainButton);
myButtons.drawButton(heaterButton);
myUTFT.print("Heater", 35, 135);
pumpButton = myButtons.addButton( 160, 54, 145, 53, mainButton);
myButtons.drawButton(pumpButton);
myUTFT.print("Pump", 190, 71);
settingsButton = myButtons.addButton( 160, 110, 145, 53, mainButton);
myButtons.drawButton(settingsButton);
myUTFT.print("Override", 175, 135);
//Draw back button
back2SetupButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(back2SetupButton);
myUTFT.print("Back", 55, 195);
}
void ECCalibrateScreen::dryCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Do NOT put sensor in any Liquid you are", LEFT, 30);
myUTFT.print("going to calibrate for a dry condition", LEFT, 42);
myUTFT.print("This is much like setting a TARE on a", LEFT, 54);
myUTFT.print("scale", LEFT, 66);
myUTFT.print("", LEFT, 78);
myUTFT.print("Please make sure that the EC sensor is", LEFT, 90);
myUTFT.print("connected to the BNC connector before", LEFT, 102);
myUTFT.print("you continue", LEFT, 114);
//myUTFT.print("crosshairs in sequence.", LEFT, 126);
myUTFT.print("Touch screen to continue", CENTER, 162);
waitForTouch();
myUTFT.clrScr();
inputstring = "Z0\r"; //Command to get info
Serial3.print(inputstring); //send command to sensor.
}
void PlugScreen::waitForReceiver(NewRemoteCode receivedCode)
{
//Clear What was there.
myUTFT.setFont(SmallFont);
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("ID Set", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
setAddresstoEEPROM(receivedCode.address);
if(plugDevice.lights)
{
EEPROM.write(EEPROM_LEARNED_LIGHTS_UNIT,receivedCode.unit);
plugDevice.lights = false;
}
if(plugDevice.pump)
{
EEPROM.write(EEPROM_LEARNED_PUMP_UNIT,receivedCode.unit);
plugDevice.pump = false;
}
if(plugDevice.heater)
{
EEPROM.write(EEPROM_LEARNED_HEATER_UNIT,receivedCode.unit);
plugDevice.heater = false;
}
//unsigned long add = getAddress();
String sAddress(receivedCode.address);
String slightID(receivedCode.unit);
myUTFT.print("The unit has been set to unit ", LEFT, 30);
myUTFT.print(slightID, LEFT, 42);
myUTFT.print("The Transmitting Address is", LEFT, 54);
myUTFT.print(sAddress, LEFT, 66);
myUTFT.print("You can now use the plug", LEFT, 78);
myUTFT.print("**********************************", LEFT, 90);
myButtons.deleteAllButtons();
exitButton = -1;
exitButton = myButtons.addButton( 10, 170, 145, 53, mainButton);
myButtons.drawButton(exitButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 55, 195);
myUTFT.setFont(BigFont);
}
void ECCalibrateScreen::endCalibration()
{
myUTFT.fillScr(VGA_BLUE);
myUTFT.setColor(VGA_RED);
myUTFT.fillRoundRect(80, 70, 239, 169);
myUTFT.setColor(VGA_WHITE);
myUTFT.setBackColor(VGA_RED);
myUTFT.print("! All Done !", CENTER, 93);
myUTFT.print("Touch Screen", CENTER, 119);
myUTFT.print("To Exit", CENTER, 132);
SwaitForTouch();
myUTFT.clrScr();
myUTFT.setFont(BigFont);
myButtons.enableButton( /*resetButton*/ 0);
myButtons.enableButton( /*infoButton*/ 1);
myButtons.enableButton( /*readButton*/ 2);
myButtons.enableButton( /*tempReadButton*/ 3);
myButtons.enableButton( /*stopButton*/ 4);
myButtons.enableButton( /*startButton*/ 5);
myButtons.enableButton( /*backButton*/6);
myButtons.enableButton( /*calibrateButton*/7);
SdrawScreen();
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doUpdate(TFTMenu* menu)
{
// тут обновляем внутреннее состояние
if (isActive())
{
DS3231Time tm = RealtimeClock.getTime();
if (oldsecond != tm.second)
{
oldsecond = tm.second;
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
// получаем компоненты даты в виде строк
String strDate = RealtimeClock.getDateStr(tm);
String strTime = RealtimeClock.getTimeStr(tm);
dc->setFont(SmallRusFont);
// печатаем их
dc->print(strDate, 5, 305);
dc->print(strTime, 160, 305);
//dc->printNumF(setupPin.power3V3, 1, 195, 1); //
//dc->printNumF(setupPin.power5V0, 1, 195, 15); //
//dc->printNumI(setupPin.power200, 195, 30); //
}
}
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1_0::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
dc->setFont(TFT_FONT);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("Настройки", 50, 0);
}
void ECCalibrateScreen::drawStoppingScreen()
{
myUTFT.clrScr();
resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC STOPPED", CENTER, 1);
myUTFT.print("All EC Readings", CENTER, 30);
myUTFT.print("Now Stopped", CENTER, 54);
myUTFT.print("Sensor Standby", CENTER, 78);
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void SoundLevelScreen::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
uint8_t* oldFont = dc->getFont();
dc->setFont(BigRusFont);
dc->setBackColor(VGA_BLACK);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("УРОВЕНЬ ЗВУКА", 105, 10);
dc->setFont(oldFont);
}
void ECCalibrateScreen::lowCalibration()
{
myUTFT.clrScr();
myUTFT.setColor(255, 0, 0);
myUTFT.fillRect(0, 0, 220, 13);
myUTFT.setColor(255, 255, 255);
myUTFT.setBackColor(255, 0, 0);
myUTFT.drawLine(0, 14, 320, 14);
myUTFT.print("EC Calibration", CENTER, 1);
myUTFT.setBackColor(0, 0, 0);
myUTFT.print("Calibrate now with the low side liquid", LEFT, 30);
myUTFT.print("Place the sensor in the 220Us", LEFT, 42);
myUTFT.print("calibration liquid. This process", LEFT, 54);
myUTFT.print("will take 5 mins to complete", LEFT, 66);
myUTFT.print("Wait for process to finish before ", LEFT, 78);
myUTFT.print("removing the sensor from the liquid", LEFT, 90);
myUTFT.print("", LEFT, 102);
myUTFT.print("************************************", LEFT, 114);
myUTFT.print("Touch screen to continue", CENTER, 162);
SwaitForTouch();
myUTFT.clrScr();
inputstring = "C\r"; //set in continious mode
String thisSt = String(12);
myUTFT.print("Calibration in Progress", CENTER, 30);
myUTFT.print("Seconds left until ready " + thisSt, CENTER, 42);
simpleTimer.setTimer(3000, updateLowWaitScreen, /*100*/ 4); //Update screen every 3 seconds for 5 minues.
//delay(2000); //Wait 2 seconds -- make 5mins
//Serial3.print(inputstring); //send command to sensor.
//inputstring = "Z2\r"; //set the sensor at this value.
//Serial3.print(inputstring); //need to send twice??
}
void Mixer::render(UTFT tft) {
tft.clrScr();
tft.setColor(255, 255, 255);
tft.fillRect(0, 0, tft.getDisplayXSize() - 1, 12);
tft.setBackColor(255, 255, 255);
tft.setColor(0, 0, 0);
tft.setFont(SmallFont);
tft.print("Mixer", 10, 0);
_tft = tft;
for(byte x=0;x<3; x++) {
renderedGains[x] = 0;
renderMute(x);
}
update();
}
/*
* Delivering this instruction will instruct the E.C. Circuit to transmit it device info.
Full proper syntax: i<cr> or I<CR>
The E.C. Circuit will respond: E,V3.0,4/11<CR>
Where:
E =E.C. Circuit
V3.1= Firmware version
5/13= Date firmware was written
*/
void ECCalibrateScreen::getInfo()
{
inputstring = "I\r"; //Command to get info
Serial3.print(inputstring); //send command to sensor.
//Draw part of the screen here and the info when we have it.
//info comes after the loop has iterated.
myUTFT.clrScr();
resetButtons();
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
waiting_for_info = true;
}
void ECCalibrateScreen::getTempSingleReading()
{
inputstring = ( waterTempString + "\r"); //"17.8\r"Command to get reading.
Serial3.print(inputstring); //send command to sensor.
delay(1000); //This takes 1000ms to complete.
//Draw part of the screen here and the info when we have it.
//info comes after the loop has iterated.
myUTFT.clrScr();
resetButtons();
//Draw back button
subBackButton = myButtons.addButton( 10, 168, 145, 53, mainButton);
myButtons.drawButton(subBackButton);
myUTFT.setBackColor (161,190,237);
myUTFT.print("Back", 45, 185);
waiting_for_single_reading = true;
}
void Keyboard::render(UTFT tft) {
tft.clrScr();
tft.setFont(BigFont);
tft.setBackColor(255, 255, 255);
tft.setColor(255, 255, 255);
tft.drawRoundRect(30, 30, tft.getDisplayXSize() - 111, 70);
tft.fillRect(tft.getDisplayXSize() - 106, 30, tft.getDisplayXSize() - 66, 70);
tft.setColor(0, 0, 0);
tft.print("<-", tft.getDisplayXSize() - 102, 43);
tft.setColor(255, 255, 255);
tft.fillRect(tft.getDisplayXSize() - 61, 30, tft.getDisplayXSize() - 21, 70);
tft.setColor(0, 0, 0);
tft.print("OK", tft.getDisplayXSize() - 57, 43);
byte br = 9,
nl = 0,
offset = 1;
int x = offset,
y = 120;
for(byte j=0; j<numKeys; j++) {
tft.setColor(255, 255, 255);
tft.fillRect(x, y, x + 30, y + 30);
tft.setColor(0, 0, 0);
String str = "";
str += keys[j]; //lame!
tft.print(str, x + 7, y + 8);
x += 32;
nl++;
if(nl > br) {
offset += 15;
x = offset;
nl = 0;
y += 32;
br -= 1;
}
}
_tft = tft;
}
void drawDryScreen()
{
String version = sensorstring.substring(3,6);
String date = sensorstring.substring(7,11);
sensorstring="";
//resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
//Indicate that we have changed screens.
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC HW Info", CENTER, 1);
myUTFT.print("Sensor Version", CENTER, 30);
myUTFT.print(version, CENTER, 54);
myUTFT.print("Firmware Date", CENTER, 78);
myUTFT.print(date, CENTER, 102);
}
//Static so can be used with the callback.
void drawReadingScreen()
{
String EC = sensorstring.substring(0,3);
String TDS = sensorstring.substring(4,6);
String SAL = sensorstring.substring(7,8);
sensorstring="";
//resetButtons();
myButtons.setButtonColors(VGA_WHITE, VGA_GRAY, VGA_BLACK, VGA_RED, VGA_BLACK);
//Indicate that we have changed screens.
myUTFT.setBackColor (VGA_BLACK);
myUTFT.print("EC Get Reading", CENTER, 1);
myUTFT.print("EC Level", CENTER, 30);
myUTFT.print(EC, CENTER, 54);
myUTFT.print("TDS Level", CENTER, 78);
myUTFT.print(TDS, CENTER, 102);
myUTFT.print(SAL, CENTER, 126);
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void Screen1::doDraw(TFTMenu* menu)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLACK);
dc->setFont(TFT_FONT);
// тут рисуем, что надо именно нам, кнопки прорисуются сами после того, как мы тут всё отрисуем
menu->print("Главный экран", 15, 0);
//// выводим число
//dc->setColor(VGA_BLUE);
//int number = 12345;
//dc->printNumI(number, 20,200);
//dc->setFont(SmallSymbolFont);
//// выводим спецсимвол
//dc->printChar(47,20,250);
// возвращает шрифт по умолчанию
dc->setFont(TFT_FONT);
/*RealXBeeMenu.XBee_status();
delay(300);*/
}
void ECCalibrateScreen::begin()
{
// Initial setup
myUTFT.InitLCD();
myUTFT.clrScr();
myTouch.InitTouch();
myTouch.setPrecision(PREC_MEDIUM);
myUTFT.setFont(BigFont);
myUTFT.setBackColor(0, 0, 255);
myButtons.setTextFont(BigFont);
resetButtons();
sensorstring = "";
sensorstring.reserve(30); //set aside some bytes for receiving data
inputstring = "";
waiting_for_info = false;
waiting_for_single_reading = false;
sensor_stringcomplete = false;
factReset = false;
inStopMode = false;
waiting_for_dry = false;
Serial3.begin(38400); //To communicate with the sensor.
Serial.begin(115200);
//Start Read straight away.
inputstring = ( waterTempString + ",C\r"); //Start based on temp.
Serial3.print(inputstring); //send command to sensor.
}
//------------------------------------------------------------------------------------------------------------------------------------------------------------------------
void SoundLevelScreen::onButtonPressed(TFTMenu* menu, int pressedButton)
{
UTFT* dc = menu->getDC();
dc->setColor(VGA_WHITE);
dc->setBackColor(VGA_BLUE);
int x_sound = 189;
int y_sound = 102;
if (pressedButton == backButton)
menu->switchToScreen("Settings");
else if (pressedButton == volumeLeftButton)
{
if (volumeSoundOff)
{
volumeSound -= 1;
if (volumeSound < 0)
{
volumeSound = 0;
}
Settings.setVolumeSound(volumeSound);
if (volumeSound < 10)
{
dc->printNumI(0, x_sound, y_sound);
dc->printNumI(volumeSound, x_sound + 16, y_sound);
}
else
{
dc->printNumI(volumeSound, x_sound, y_sound);
}
}
}
else if (pressedButton == volumeInfoButton)
{
volumeSoundStr = Settings.getVolumeSound();
volumeSoundOff = !volumeSoundOff;
if (!volumeSoundOff)
{
screenButtons->deleteButton(volumeInfoButton);
volumeInfoButton = screenButtons->addButton(165, 80, 80, 60, "m", BUTTON_SYMBOL); // кнопка
screenButtons->drawButton(volumeInfoButton);
}
else
{
screenButtons->deleteButton(volumeInfoButton);
volumeInfoButton = screenButtons->addButton(165, 80, 80, 60, volumeSoundStr.c_str()); // кнопка
screenButtons->drawButton(volumeInfoButton);
}
}
else if (pressedButton == volumeRightButton)
{
if (volumeSoundOff)
{
volumeSound += 1;
if (volumeSound > 30)
{
volumeSound = 30;
}
Settings.setVolumeSound(volumeSound);
if (volumeSound < 10)
{
dc->printNumI(0, x_sound, y_sound);
dc->printNumI(volumeSound, x_sound + 16, y_sound);
}
else
{
dc->printNumI(volumeSound, x_sound, y_sound);
}
}
}
}
