PxrUsdTranslators_InstancerWriter::PxrUsdTranslators_InstancerWriter(
const MFnDependencyNode& depNodeFn,
const SdfPath& usdPath,
UsdMayaWriteJobContext& jobCtx) :
UsdMayaTransformWriter(depNodeFn, usdPath, jobCtx),
_numPrototypes(0)
{
if (!TF_VERIFY(GetDagPath().isValid())) {
return;
}
UsdGeomPointInstancer primSchema =
UsdGeomPointInstancer::Define(GetUsdStage(), GetUsdPath());
if (!TF_VERIFY(
primSchema,
"Could not define UsdGeomPointInstancer at path '%s'\n",
GetUsdPath().GetText())) {
return;
}
_usdPrim = primSchema.GetPrim();
if (!TF_VERIFY(
_usdPrim,
"Could not get UsdPrim for UsdGeomPointInstancer at path '%s'\n",
primSchema.GetPath().GetText())) {
return;
}
// Note that the instancer is a model -- it's an assembly by default, though
// the model kind writer is allowed to "fix" this up.
UsdModelAPI(_usdPrim).SetKind(KindTokens->assembly);
_modelPaths.push_back(_usdPrim.GetPath());
}
void
PxrUsdKatanaReadPointInstancer(
const UsdGeomPointInstancer& instancer,
const PxrUsdKatanaUsdInPrivateData& data,
PxrUsdKatanaAttrMap& instancerAttrMap,
PxrUsdKatanaAttrMap& sourcesAttrMap,
PxrUsdKatanaAttrMap& instancesAttrMap,
PxrUsdKatanaAttrMap& inputAttrMap)
{
const double currentTime = data.GetCurrentTime();
PxrUsdKatanaReadXformable(instancer, data, instancerAttrMap);
// Get primvars for setting later. Unfortunatley, the only way to get them
// out of the attr map is to build it, which will cause its contents to be
// cleared. We'll need to restore its contents before continuing.
//
FnKat::GroupAttribute instancerAttrs = instancerAttrMap.build();
FnKat::GroupAttribute primvarAttrs =
instancerAttrs.getChildByName("geometry.arbitrary");
for (int64_t i = 0; i < instancerAttrs.getNumberOfChildren(); ++i)
{
instancerAttrMap.set(instancerAttrs.getChildName(i),
instancerAttrs.getChildByIndex(i));
}
instancerAttrMap.set("type", FnKat::StringAttribute("usd point instancer"));
const std::string fileName = data.GetUsdInArgs()->GetFileName();
instancerAttrMap.set("info.usd.fileName", FnKat::StringAttribute(fileName));
FnKat::GroupAttribute inputAttrs = inputAttrMap.build();
const std::string katOutputPath = FnKat::StringAttribute(
inputAttrs.getChildByName("outputLocationPath")).getValue("", false);
if (katOutputPath.empty())
{
_LogAndSetError(instancerAttrMap, "No output location path specified");
return;
}
//
// Validate instancer data.
//
const std::string instancerPath = instancer.GetPath().GetString();
UsdStageWeakPtr stage = instancer.GetPrim().GetStage();
// Prototypes (required)
//
SdfPathVector protoPaths;
instancer.GetPrototypesRel().GetTargets(&protoPaths);
if (protoPaths.empty())
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototypes");
return;
}
_PathToPrimMap primCache;
for (auto protoPath : protoPaths) {
const UsdPrim &protoPrim = stage->GetPrimAtPath(protoPath);
primCache[protoPath] = protoPrim;
}
// Indices (required)
//
VtIntArray protoIndices;
if (!instancer.GetProtoIndicesAttr().Get(&protoIndices, currentTime))
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototype indices");
return;
}
const size_t numInstances = protoIndices.size();
if (numInstances == 0)
{
_LogAndSetError(instancerAttrMap, "Instancer has no prototype indices");
return;
}
for (auto protoIndex : protoIndices)
{
if (protoIndex < 0 || static_cast<size_t>(protoIndex) >= protoPaths.size())
{
_LogAndSetError(instancerAttrMap, TfStringPrintf(
"Out of range prototype index %d", protoIndex));
return;
}
}
// Mask (optional)
//
std::vector<bool> pruneMaskValues =
instancer.ComputeMaskAtTime(currentTime);
if (!pruneMaskValues.empty() and pruneMaskValues.size() != numInstances)
{
_LogAndSetError(instancerAttrMap,
"Mismatch in length of indices and mask");
return;
}
// Positions (required)
//
UsdAttribute positionsAttr = instancer.GetPositionsAttr();
if (!positionsAttr.HasValue())
{
_LogAndSetError(instancerAttrMap, "Instancer has no positions");
return;
}
//
// Compute instance transform matrices.
//
const double timeCodesPerSecond = stage->GetTimeCodesPerSecond();
// Gather frame-relative sample times and add them to the current time to
// generate absolute sample times.
//
const std::vector<double> &motionSampleTimes =
data.GetMotionSampleTimes(positionsAttr);
const size_t sampleCount = motionSampleTimes.size();
std::vector<UsdTimeCode> sampleTimes(sampleCount);
for (size_t a = 0; a < sampleCount; ++a)
{
sampleTimes[a] = UsdTimeCode(currentTime + motionSampleTimes[a]);
}
// Get velocityScale from the opArgs.
//
float velocityScale = FnKat::FloatAttribute(
inputAttrs.getChildByName("opArgs.velocityScale")).getValue(1.0f, false);
// XXX Replace with UsdGeomPointInstancer::ComputeInstanceTransformsAtTime.
//
std::vector<std::vector<GfMatrix4d>> xformSamples(sampleCount);
const size_t numXformSamples =
_ComputeInstanceTransformsAtTime(xformSamples, instancer, sampleTimes,
UsdTimeCode(currentTime), timeCodesPerSecond, numInstances,
positionsAttr, velocityScale);
if (numXformSamples == 0) {
_LogAndSetError(instancerAttrMap, "Could not compute "
"sample/topology-invarying instance "
"transform matrix");
return;
}
//
// Compute prototype bounds.
//
bool aggregateBoundsValid = false;
std::vector<double> aggregateBounds;
// XXX Replace with UsdGeomPointInstancer::ComputeExtentAtTime.
//
VtVec3fArray aggregateExtent;
if (_ComputeExtentAtTime(
aggregateExtent, data.GetUsdInArgs(), xformSamples,
motionSampleTimes, protoIndices, protoPaths, primCache,
pruneMaskValues)) {
aggregateBoundsValid = true;
aggregateBounds.resize(6);
aggregateBounds[0] = aggregateExtent[0][0]; // min x
aggregateBounds[1] = aggregateExtent[1][0]; // max x
aggregateBounds[2] = aggregateExtent[0][1]; // min y
aggregateBounds[3] = aggregateExtent[1][1]; // max y
aggregateBounds[4] = aggregateExtent[0][2]; // min z
aggregateBounds[5] = aggregateExtent[1][2]; // max z
}
//
// Build sources. Keep track of which instances use them.
//
FnGeolibServices::StaticSceneCreateOpArgsBuilder sourcesBldr(false);
std::vector<int> instanceIndices;
instanceIndices.reserve(numInstances);
std::vector<std::string> instanceSources;
instanceSources.reserve(protoPaths.size());
std::map<std::string, int> instanceSourceIndexMap;
std::vector<int> omitList;
omitList.reserve(numInstances);
std::map<SdfPath, std::string> protoPathsToKatPaths;
for (size_t i = 0; i < numInstances; ++i)
{
int index = protoIndices[i];
// Check to see if we are pruned.
//
bool isPruned = (!pruneMaskValues.empty() and
pruneMaskValues[i] == false);
if (isPruned)
{
omitList.push_back(i);
}
const SdfPath &protoPath = protoPaths[index];
// Compute the full (Katana) path to this prototype.
//
std::string fullProtoPath;
std::map<SdfPath, std::string>::const_iterator pptkpIt =
protoPathsToKatPaths.find(protoPath);
if (pptkpIt != protoPathsToKatPaths.end())
{
fullProtoPath = pptkpIt->second;
}
else
{
_PathToPrimMap::const_iterator pcIt = primCache.find(protoPath);
const UsdPrim &protoPrim = pcIt->second;
if (!protoPrim) {
continue;
}
// Determine where (what path) to start building the prototype prim
// such that its material bindings will be preserved. This could be
// the prototype path itself or an ancestor path.
//
SdfPathVector commonPrefixes;
UsdRelationship materialBindingsRel =
UsdShadeMaterial::GetBindingRel(protoPrim);
auto assetAPI = UsdModelAPI(protoPrim);
std::string assetName;
bool isReferencedModelPrim =
assetAPI.IsModel() and assetAPI.GetAssetName(&assetName);
if (!materialBindingsRel or isReferencedModelPrim)
{
// The prim has no material bindings or is a referenced model
// prim (meaning that materials are defined below it); start
// building at the prototype path.
//
commonPrefixes.push_back(protoPath);
}
else
{
SdfPathVector materialPaths;
materialBindingsRel.GetForwardedTargets(&materialPaths);
for (auto materialPath : materialPaths)
{
const SdfPath &commonPrefix =
protoPath.GetCommonPrefix(materialPath);
if (commonPrefix.GetString() == "/")
{
// XXX Unhandled case.
// The prototype prim and its material are not under the
// same parent; start building at the prototype path
// (although it is likely that bindings will be broken).
//
commonPrefixes.push_back(protoPath);
}
else
{
// Start building at the common ancestor between the
// prototype prim and its material.
//
commonPrefixes.push_back(commonPrefix);
}
}
}
// XXX Unhandled case.
// We'll use the first common ancestor even if there is more than
// one (which shouldn't appen if the prototype prim and its bindings
// are under the same parent).
//
SdfPath::RemoveDescendentPaths(&commonPrefixes);
const std::string buildPath = commonPrefixes[0].GetString();
// See if the path is a child of the point instancer. If so, we'll
// match its hierarchy. If not, we'll put it under a 'prototypes'
// group.
//
std::string relBuildPath;
if (pystring::startswith(buildPath, instancerPath + "/"))
{
relBuildPath = pystring::replace(
buildPath, instancerPath + "/", "");
}
else
{
relBuildPath = "prototypes/" +
FnGeolibUtil::Path::GetLeafName(buildPath);
}
// Start generating the full path to the prototype.
//
fullProtoPath = katOutputPath + "/" + relBuildPath;
// Make the common ancestor our instance source.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"type", FnKat::StringAttribute("instance source"));
// Author a tracking attr.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"info.usd.sourceUsdPath",
FnKat::StringAttribute(buildPath));
// Tell the BuildIntermediate op to start building at the common
// ancestor.
//
sourcesBldr.setAttrAtLocation(relBuildPath,
"usdPrimPath", FnKat::StringAttribute(buildPath));
sourcesBldr.setAttrAtLocation(relBuildPath,
"usdPrimName", FnKat::StringAttribute("geo"));
if (protoPath.GetString() != buildPath)
{
// Finish generating the full path to the prototype.
//
fullProtoPath = fullProtoPath + "/geo" + pystring::replace(
protoPath.GetString(), buildPath, "");
}
// Create a mapping that will link the instance's index to its
// prototype's full path.
//
instanceSourceIndexMap[fullProtoPath] = instanceSources.size();
instanceSources.push_back(fullProtoPath);
// Finally, store the full path in the map so we won't have to do
// this work again.
//
protoPathsToKatPaths[protoPath] = fullProtoPath;
}
instanceIndices.push_back(instanceSourceIndexMap[fullProtoPath]);
}
//
// Build instances.
//
FnGeolibServices::StaticSceneCreateOpArgsBuilder instancesBldr(false);
instancesBldr.createEmptyLocation("instances", "instance array");
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceSource",
FnKat::StringAttribute(instanceSources, 1));
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceIndex",
FnKat::IntAttribute(&instanceIndices[0],
instanceIndices.size(), 1));
FnKat::DoubleBuilder instanceMatrixBldr(16);
for (size_t a = 0; a < numXformSamples; ++a) {
double relSampleTime = motionSampleTimes[a];
// Shove samples into the builder at the frame-relative sample time. If
// motion is backwards, make sure to reverse time samples.
std::vector<double> &matVec = instanceMatrixBldr.get(
data.IsMotionBackward()
? PxrUsdKatanaUtils::ReverseTimeSample(relSampleTime)
: relSampleTime);
matVec.reserve(16 * numInstances);
for (size_t i = 0; i < numInstances; ++i) {
GfMatrix4d instanceXform = xformSamples[a][i];
const double *matArray = instanceXform.GetArray();
for (int j = 0; j < 16; ++j) {
matVec.push_back(matArray[j]);
}
}
}
instancesBldr.setAttrAtLocation("instances",
"geometry.instanceMatrix", instanceMatrixBldr.build());
if (!omitList.empty())
{
instancesBldr.setAttrAtLocation("instances",
"geometry.omitList",
FnKat::IntAttribute(&omitList[0], omitList.size(), 1));
}
instancesBldr.setAttrAtLocation("instances",
"geometry.pointInstancerId",
FnKat::StringAttribute(katOutputPath));
//
// Transfer primvars.
//
FnKat::GroupBuilder instancerPrimvarsBldr;
FnKat::GroupBuilder instancesPrimvarsBldr;
for (int64_t i = 0; i < primvarAttrs.getNumberOfChildren(); ++i)
{
const std::string primvarName = primvarAttrs.getChildName(i);
// Use "point" scope for the instancer.
instancerPrimvarsBldr.set(primvarName, primvarAttrs.getChildByIndex(i));
instancerPrimvarsBldr.set(primvarName + ".scope",
FnKat::StringAttribute("point"));
// User "primitive" scope for the instances.
instancesPrimvarsBldr.set(primvarName, primvarAttrs.getChildByIndex(i));
instancesPrimvarsBldr.set(primvarName + ".scope",
FnKat::StringAttribute("primitive"));
}
instancerAttrMap.set("geometry.arbitrary", instancerPrimvarsBldr.build());
instancesBldr.setAttrAtLocation("instances",
"geometry.arbitrary", instancesPrimvarsBldr.build());
//
// Set the final aggregate bounds.
//
if (aggregateBoundsValid)
{
instancerAttrMap.set("bound", FnKat::DoubleAttribute(&aggregateBounds[0], 6, 2));
}
//
// Set proxy attrs.
//
instancerAttrMap.set("proxies", PxrUsdKatanaUtils::GetViewerProxyAttr(data));
//
// Transfer builder results to our attr maps.
//
FnKat::GroupAttribute sourcesAttrs = sourcesBldr.build();
for (int64_t i = 0; i < sourcesAttrs.getNumberOfChildren(); ++i)
{
sourcesAttrMap.set(
sourcesAttrs.getChildName(i),
sourcesAttrs.getChildByIndex(i));
}
FnKat::GroupAttribute instancesAttrs = instancesBldr.build();
for (int64_t i = 0; i < instancesAttrs.getNumberOfChildren(); ++i)
{
instancesAttrMap.set(
instancesAttrs.getChildName(i),
instancesAttrs.getChildByIndex(i));
}
}
bool
PxrUsdTranslators_InstancerWriter::writeInstancerAttrs(
const UsdTimeCode& usdTime,
const UsdGeomPointInstancer& instancer)
{
MStatus status = MS::kSuccess;
MFnDagNode dagNode(GetDagPath(), &status);
CHECK_MSTATUS_AND_RETURN(status, false);
// Note: In this function, we don't read instances using the provided
// MFnInstancer API. One reason is that it breaks up prototypes into their
// constituent shapes, and there's no way to figure out which hierarchy
// they came from. Another reason is that it only provides computed matrices
// and not separate position, rotation, scale attrs.
const SdfPath prototypesGroupPath =
instancer.GetPrim().GetPath().AppendChild(_tokens->Prototypes);
// At the default time, setup all the prototype instances.
if (usdTime.IsDefault()) {
const MPlug inputHierarchy = dagNode.findPlug("inputHierarchy", true,
&status);
CHECK_MSTATUS_AND_RETURN(status, false);
// Note that the "Prototypes" prim needs to be a model group to ensure
// contiguous model hierarchy.
const UsdPrim prototypesGroupPrim = GetUsdStage()->DefinePrim(
prototypesGroupPath);
UsdModelAPI(prototypesGroupPrim).SetKind(KindTokens->group);
_modelPaths.push_back(prototypesGroupPath);
UsdRelationship prototypesRel = instancer.CreatePrototypesRel();
const unsigned int numElements = inputHierarchy.numElements();
for (unsigned int i = 0; i < numElements; ++i) {
const MPlug plug = inputHierarchy[i];
const MPlug source(UsdMayaUtil::GetConnected(plug));
if (source.isNull()) {
TF_WARN("Cannot read prototype: the source plug %s was null",
plug.name().asChar());
return false;
}
MFnDagNode sourceNode(source.node(), &status);
CHECK_MSTATUS_AND_RETURN(status, false);
MDagPath prototypeDagPath;
sourceNode.getPath(prototypeDagPath);
// Prototype names are guaranteed unique by virtue of having a
// unique numerical suffix _# indicating the prototype index.
const TfToken prototypeName(
TfStringPrintf("%s_%d", sourceNode.name().asChar(), i));
const SdfPath prototypeUsdPath = prototypesGroupPrim.GetPath()
.AppendChild(prototypeName);
UsdPrim prototypePrim = GetUsdStage()->DefinePrim(
prototypeUsdPath);
_modelPaths.push_back(prototypeUsdPath);
// Try to be conservative and only create an intermediary xformOp
// with the instancerTranslate if we can ensure that we don't need
// to compensate for the translation on the prototype root.
//
// XXX: instancerTranslate does not behave well when added to a
// reference that has an existing transform on the far side of the
// reference. However, its behavior at least matches the
// behavior in UsdMayaTranslatorModelAssembly. If we fix the
// behavior there, we need to make sure that this is also
// fixed to match.
bool instancerTranslateAnimated = false;
if (_NeedsExtraInstancerTranslate(
prototypeDagPath, &instancerTranslateAnimated)) {
UsdGeomXformable xformable(prototypePrim);
UsdGeomXformOp newOp = xformable.AddTranslateOp(
UsdGeomXformOp::PrecisionDouble,
_tokens->instancerTranslate);
_instancerTranslateOps.push_back(
{prototypeDagPath, newOp, instancerTranslateAnimated});
}
// Two notes:
// (1) We don't un-instance here, because it's OK for the prototype
// to just be a reference to an instance master if the prototype
// participates in Maya native instancing.
// (2) The prototype root must be visible to match Maya's behavior,
// which always vis'es the prototype root, even if it is marked
// hidden.
_writeJobCtx.CreatePrimWriterHierarchy(
prototypeDagPath,
prototypeUsdPath,
/*forceUninstance*/ false,
/*exportRootVisibility*/ false,
&_prototypeWriters);
prototypesRel.AddTarget(prototypeUsdPath);
}
_numPrototypes = numElements;
}
// If there aren't any prototypes, fail and don't export on subsequent
// time-sampled exports.
if (_numPrototypes == 0) {
return false;
}
// Actual write of prototypes (@ both default time and animated time).
for (UsdMayaPrimWriterSharedPtr& writer : _prototypeWriters) {
writer->Write(usdTime);
if (usdTime.IsDefault()) {
// Prototype roots should have kind component or derived.
// Calling Write() above may have populated kinds, so don't stomp
// over existing component-derived kinds.
// (Note that ModelKindWriter's fix-up stage might change this.)
if (writer->GetUsdPath().GetParentPath() == prototypesGroupPath) {
if (const UsdPrim writerPrim = writer->GetUsdPrim()) {
UsdModelAPI primModelAPI(writerPrim);
TfToken kind;
primModelAPI.GetKind(&kind);
if (!KindRegistry::IsA(kind, KindTokens->component)) {
primModelAPI.SetKind(KindTokens->component);
}
}
}
}
}
// Write the instancerTranslate xformOp for all prims that need it.
// (This should happen @ default time or animated time depending on whether
// the xform is animated.)
for (const _TranslateOpData& opData : _instancerTranslateOps) {
if (opData.isAnimated != usdTime.IsDefault()) {
GfVec3d origin;
if (_GetTransformedOriginInLocalSpace(opData.mayaPath, &origin)) {
UsdGeomXformOp translateOp = opData.op;
_SetAttribute(translateOp.GetAttr(), -origin, usdTime);
}
}
}
// Grab the inputPoints data from the source plug.
// (This attribute's value must come from a source plug; it isn't
// directly writeable. Thus reading it directly may not give the right
// value depending on Maya's execution behavior.)
MPlug inputPointsDest = dagNode.findPlug("inputPoints", true, &status);
CHECK_MSTATUS_AND_RETURN(status, false);
MPlug inputPointsSrc = UsdMayaUtil::GetConnected(inputPointsDest);
if (inputPointsSrc.isNull()) {
TF_WARN("inputPoints not connected on instancer '%s'",
GetDagPath().fullPathName().asChar());
return false;
}
auto holder = UsdMayaUtil::GetPlugDataHandle(inputPointsSrc);
if (!holder) {
TF_WARN("Unable to read inputPoints data handle for instancer '%s'",
GetDagPath().fullPathName().asChar());
return false;
}
MFnArrayAttrsData inputPointsData(holder->GetDataHandle().data(),
&status);
CHECK_MSTATUS_AND_RETURN(status, false);
if (!UsdMayaWriteUtil::WriteArrayAttrsToInstancer(
inputPointsData, instancer, _numPrototypes, usdTime,
_GetSparseValueWriter())) {
return false;
}
// Load the completed point instancer to compute and set its extent.
instancer.GetPrim().GetStage()->Load(instancer.GetPath());
VtArray<GfVec3f> extent(2);
if (instancer.ComputeExtentAtTime(&extent, usdTime, usdTime)) {
_SetAttribute(instancer.CreateExtentAttr(), &extent, usdTime);
}
return true;
}
