/**
* @brief SaveDialog save options into file after change in dialog.
*/
void VToolSpline::SaveDialog(QDomElement &domElement)
{
SCASSERT(dialog != nullptr);
DialogSpline *dialogTool = qobject_cast<DialogSpline*>(dialog);
SCASSERT(dialogTool != nullptr);
VPointF point1 = *VAbstractTool::data.GeometricObject<const VPointF *>(dialogTool->getP1());
VPointF point4 = *VAbstractTool::data.GeometricObject<const VPointF *>(dialogTool->getP4());
VSpline spl = VSpline (point1, point4, dialogTool->getAngle1(), dialogTool->getAngle2(),
dialogTool->getKAsm1(), dialogTool->getKAsm2(), dialogTool->getKCurve());
disconnect(controlPoints[0], &VControlPointSpline::ControlPointChangePosition, this,
&VToolSpline::ControlPointChangePosition);
disconnect(controlPoints[1], &VControlPointSpline::ControlPointChangePosition, this,
&VToolSpline::ControlPointChangePosition);
controlPoints[0]->setPos(spl.GetP2());
controlPoints[1]->setPos(spl.GetP3());
connect(controlPoints[0], &VControlPointSpline::ControlPointChangePosition, this,
&VToolSpline::ControlPointChangePosition);
connect(controlPoints[1], &VControlPointSpline::ControlPointChangePosition, this,
&VToolSpline::ControlPointChangePosition);
spl = VSpline (point1, controlPoints[0]->pos(), controlPoints[1]->pos(), point4, dialogTool->getKCurve());
doc->SetAttribute(domElement, AttrPoint1, spl.GetP1().id());
doc->SetAttribute(domElement, AttrPoint4, spl.GetP4().id());
doc->SetAttribute(domElement, AttrAngle1, spl.GetAngle1());
doc->SetAttribute(domElement, AttrAngle2, spl.GetAngle2());
doc->SetAttribute(domElement, AttrKAsm1, spl.GetKasm1());
doc->SetAttribute(domElement, AttrKAsm2, spl.GetKasm2());
doc->SetAttribute(domElement, AttrKCurve, spl.GetKcurve());
}
/**
* @brief UpdatePoints update data for united details.
* @param idDetail id united detail.
* @param data container with variables.
* @param det detail what we union.
* @param i index node in detail.
* @param idCount count updated or created objects.
* @param dx bias node x axis.
* @param dy bias node y axis.
* @param pRotate point rotation.
* @param angle angle rotation.
*/
void VToolUnionDetails::UpdatePoints(const quint32 &idDetail, VContainer *data, const VDetail &det, const int &i,
quint32 &idCount, const qreal &dx, const qreal &dy, const quint32 &pRotate,
const qreal &angle)
{
switch (det.at(i).getTypeTool())
{
case (Tool::NodePoint):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
VPointF *point = new VPointF(*data->GeometricObject<VPointF>(det.at(i).getId()));
point->setMode(Draw::Modeling);
BiasRotatePoint(point, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, point);
++idCount;
}
}
break;
case (Tool::NodeArc):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
const QSharedPointer<VArc> arc = data->GeometricObject<VArc>(det.at(i).getId());
VPointF p1 = VPointF(arc->GetP1());
BiasRotatePoint(&p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p2 = VPointF(arc->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *center = new VPointF(arc->GetCenter());
BiasRotatePoint(center, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
QLineF l1(center->toQPointF(), p1.toQPointF());
QLineF l2(center->toQPointF(), p2.toQPointF());
++idCount;
center->setMode(Draw::Modeling);
data->UpdateGObject(idDetail+idCount, center);
VArc *arc1 = new VArc(*center, arc->GetRadius(), arc->GetFormulaRadius(), l1.angle(),
QString().setNum(l1.angle()), l2.angle(), QString().setNum(l2.angle()));
arc1->setMode(Draw::Modeling);
++idCount;
data->UpdateGObject(idDetail+idCount, arc1);
++idCount;
}
}
break;
case (Tool::NodeSpline):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
const QSharedPointer<VSpline> spline = data->GeometricObject<VSpline>(det.at(i).getId());
VPointF *p1 = new VPointF(spline->GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p1);
VPointF p2 = VPointF(spline->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p3 = VPointF(spline->GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *p4 = new VPointF(spline->GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p4);
VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve(), 0,
Draw::Modeling);
++idCount;
data->UpdateGObject(idDetail+idCount, spl);
++idCount;
}
}
break;
case (Tool::NodeSplinePath):
{
if (qFuzzyCompare(dx+1, 1) == false || qFuzzyCompare(dy+1, 1) == false || pRotate != 0)
{
VSplinePath *path = new VSplinePath();
path->setMode(Draw::Modeling);
const QSharedPointer<VSplinePath> splinePath = data->GeometricObject<VSplinePath>(det.at(i).getId());
SCASSERT(splinePath != nullptr);
qint32 k = splinePath->getMaxCountPoints();
for (qint32 i = 1; i <= splinePath->Count(); ++i)
{
VSpline spline(splinePath->at(i-1).P(), splinePath->at(i).P(),
splinePath->at(i-1).Angle2(), splinePath->at(i).Angle1(), splinePath->at(i-1).KAsm2(),
splinePath->at(i).KAsm1(), splinePath->getKCurve());
VPointF *p1 = new VPointF(spline.GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p1);
--k;
VPointF p2 = VPointF(spline.GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF p3 = VPointF(spline.GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF *p4 = new VPointF(spline.GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
++idCount;
data->UpdateGObject(idDetail+idCount, p4);
--k;
VSpline spl = VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline.GetKcurve());
if (i==1)
{
path->append(VSplinePoint(*p1, splinePath->at(i-1).KAsm1(), spl.GetAngle1()+180,
splinePath->at(i-1).KAsm2(), spl.GetAngle1()));
}
path->append(VSplinePoint(*p4, splinePath->at(i).KAsm1(), spl.GetAngle2(),
splinePath->at(i).KAsm2(), spl.GetAngle2()+180));
}
while (k>=0)
{
data->getNextId();
--k;
++idCount;
}
++idCount;
data->UpdateGObject(idDetail+idCount, path);
++idCount;
}
}
break;
default:
qDebug()<<"May be wrong tool type!!! Ignoring."<<Q_FUNC_INFO;
break;
}
}
/**
* @brief AddToNewDetail create united detail adding one node per time.
* @param tool tool that make union.
* @param doc dom document container.
* @param data container with variables.
* @param newDetail united detail.
* @param det detail what we union.
* @param i index node in detail.
* @param idTool id tool union details.
* @param dx bias node x axis.
* @param dy bias node y axis.
* @param pRotate point rotation.
* @param angle angle rotation.
*/
void VToolUnionDetails::AddToNewDetail(QObject *tool, VPattern *doc, VContainer *data, VDetail &newDetail,
const VDetail &det, const int &i, const quint32 &idTool, const qreal &dx,
const qreal &dy, const quint32 &pRotate, const qreal &angle)
{
quint32 id = 0, idObject = 0;
switch (det.at(i).getTypeTool())
{
case (Tool::NodePoint):
{
if ( qFuzzyCompare(dx+1, 1) && qFuzzyCompare(dy+1, 1) && (pRotate == 0))
{
id = det.at(i).getId();
}
else
{
VPointF *point = new VPointF(*data->GeometricObject<VPointF>(det.at(i).getId()));
point->setMode(Draw::Modeling);
BiasRotatePoint(point, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
idObject = data->AddGObject(point);
VPointF *point1 = new VPointF(*point);
point1->setMode(Draw::Modeling);
id = data->AddGObject(point1);
VNodePoint::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
}
}
break;
case (Tool::NodeArc):
{
if (qFuzzyCompare(dx+1, 1) && qFuzzyCompare(dy+1, 1) && pRotate == 0)
{
id = det.at(i).getId();
}
else
{
const QSharedPointer<VArc> arc = data->GeometricObject<VArc>(det.at(i).getId());
VPointF p1 = VPointF(arc->GetP1(), "A", 0, 0);
BiasRotatePoint(&p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p2 = VPointF(arc->GetP2(), "A", 0, 0);
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *center = new VPointF(arc->GetCenter());
BiasRotatePoint(center, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
QLineF l1(center->toQPointF(), p1.toQPointF());
QLineF l2(center->toQPointF(), p2.toQPointF());
center->setMode(Draw::Modeling);
quint32 idCenter = data->AddGObject(center);
Q_UNUSED(idCenter);
VArc *arc1 = new VArc(*center, arc->GetRadius(), arc->GetFormulaRadius(),
l1.angle(), QString().setNum(l1.angle()), l2.angle(),
QString().setNum(l2.angle()));
arc1->setMode(Draw::Modeling);
idObject = data->AddGObject(arc1);
VArc *arc2 = new VArc(*arc1);
arc2->setMode(Draw::Modeling);
id = data->AddGObject(arc2);
VNodeArc::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
}
}
break;
case (Tool::NodeSpline):
{
if (qFuzzyCompare(dx+1, 1) && qFuzzyCompare(dy+1, 1) && pRotate == 0)
{
id = det.at(i).getId();
}
else
{
const QSharedPointer<VSpline> spline = data->GeometricObject<VSpline>(det.at(i).getId());
VPointF *p1 = new VPointF(spline->GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
//quint32 idP1 = data->AddGObject(p1);
VPointF p2 = VPointF(spline->GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF p3 = VPointF(spline->GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
VPointF *p4 = new VPointF(spline->GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(), angle);
//quint32 idP4 = data->AddGObject(p4);
VSpline *spl = new VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline->GetKcurve(), 0,
Draw::Modeling);
idObject = data->AddGObject(spl);
VSpline *spl1 = new VSpline(*spl);
spl1->setMode(Draw::Modeling);
id = data->AddGObject(spl1);
VNodeSpline::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
delete p4;
delete p1;
}
}
break;
case (Tool::NodeSplinePath):
{
if (qFuzzyCompare(dx+1, 1) && qFuzzyCompare(dy+1, 1) && pRotate == 0)
{
id = det.at(i).getId();
}
else
{
VSplinePath *path = new VSplinePath();
path->setMode(Draw::Modeling);
const QSharedPointer<VSplinePath> splinePath = data->GeometricObject<VSplinePath>(det.at(i).getId());
qint32 k = splinePath->getMaxCountPoints();
for (qint32 i = 1; i <= splinePath->Count(); ++i)
{
VSpline spline(splinePath->at(i-1).P(), splinePath->at(i).P(),
splinePath->at(i-1).Angle2(), splinePath->at(i).Angle1(), splinePath->at(i-1).KAsm2(),
splinePath->at(i).KAsm1(), splinePath->getKCurve());
VPointF *p1 = new VPointF(spline.GetP1());
BiasRotatePoint(p1, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
//quint32 idP1 = data->AddGObject(p1);
--k;
VPointF p2 = VPointF(spline.GetP2());
BiasRotatePoint(&p2, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF p3 = VPointF(spline.GetP3());
BiasRotatePoint(&p3, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
VPointF *p4 = new VPointF(spline.GetP4());
BiasRotatePoint(p4, dx, dy, data->GeometricObject<VPointF>(pRotate)->toQPointF(),
angle);
//quint32 idP4 = data->AddGObject(p4);
--k;
VSpline spl = VSpline(*p1, p2.toQPointF(), p3.toQPointF(), *p4, spline.GetKcurve());
if (i==1)
{
path->append(VSplinePoint(*p1, splinePath->at(i-1).KAsm1(), spl.GetAngle1()+180,
splinePath->at(i-1).KAsm2(), spl.GetAngle1()));
}
path->append(VSplinePoint(*p4, splinePath->at(i).KAsm1(), spl.GetAngle2(),
splinePath->at(i).KAsm2(), spl.GetAngle2()+180));
delete p4;
delete p1;
}
while (k>=0)
{
data->getNextId();
--k;
}
idObject = data->AddGObject(path);
VSplinePath *path1 = new VSplinePath(*path);
path1->setMode(Draw::Modeling);
id = data->AddGObject(path1);
VNodeSplinePath::Create(doc, data, id, idObject, Document::FullParse, Source::FromGui, idTool, tool);
}
}
break;
default:
qDebug()<<"May be wrong tool type!!! Ignoring."<<Q_FUNC_INFO;
break;
}
newDetail.append(VNodeDetail(id, det.at(i).getTypeTool(), NodeDetail::Contour));
}
/**
* @brief VSpline constructor.
* @param spline spline from which the copy.
*/
VSpline::VSpline ( const VSpline & spline )
:VAbstractCurve(spline), p1(spline.GetP1 ()), p2(spline.GetP2 ()), p3(spline.GetP3 ()), p4(spline.GetP4 ()),
angle1(spline.GetAngle1 ()), angle2(spline.GetAngle2 ()), kAsm1(spline.GetKasm1()), kAsm2(spline.GetKasm2()),
kCurve(spline.GetKcurve())
{}