void btMultiBodyConstraintSolver::setupMultiBodyContactConstraint(btMultiBodySolverConstraint& solverConstraint,
const btVector3& contactNormal,
btManifoldPoint& cp, const btContactSolverInfo& infoGlobal,
btScalar& relaxation,
bool isFriction, btScalar desiredVelocity, btScalar cfmSlip)
{
BT_PROFILE("setupMultiBodyContactConstraint");
btVector3 rel_pos1;
btVector3 rel_pos2;
btMultiBody* multiBodyA = solverConstraint.m_multiBodyA;
btMultiBody* multiBodyB = solverConstraint.m_multiBodyB;
const btVector3& pos1 = cp.getPositionWorldOnA();
const btVector3& pos2 = cp.getPositionWorldOnB();
btSolverBody* bodyA = multiBodyA ? 0 : &m_tmpSolverBodyPool[solverConstraint.m_solverBodyIdA];
btSolverBody* bodyB = multiBodyB ? 0 : &m_tmpSolverBodyPool[solverConstraint.m_solverBodyIdB];
btRigidBody* rb0 = multiBodyA ? 0 : bodyA->m_originalBody;
btRigidBody* rb1 = multiBodyB ? 0 : bodyB->m_originalBody;
if (bodyA)
rel_pos1 = pos1 - bodyA->getWorldTransform().getOrigin();
if (bodyB)
rel_pos2 = pos2 - bodyB->getWorldTransform().getOrigin();
relaxation = 1.f;
if (multiBodyA)
{
if (solverConstraint.m_linkA<0)
{
rel_pos1 = pos1 - multiBodyA->getBasePos();
} else
{
rel_pos1 = pos1 - multiBodyA->getLink(solverConstraint.m_linkA).m_cachedWorldTransform.getOrigin();
}
const int ndofA = (multiBodyA->isMultiDof() ? multiBodyA->getNumDofs() : multiBodyA->getNumLinks()) + 6;
solverConstraint.m_deltaVelAindex = multiBodyA->getCompanionId();
if (solverConstraint.m_deltaVelAindex <0)
{
solverConstraint.m_deltaVelAindex = m_data.m_deltaVelocities.size();
multiBodyA->setCompanionId(solverConstraint.m_deltaVelAindex);
m_data.m_deltaVelocities.resize(m_data.m_deltaVelocities.size()+ndofA);
} else
{
btAssert(m_data.m_deltaVelocities.size() >= solverConstraint.m_deltaVelAindex+ndofA);
}
solverConstraint.m_jacAindex = m_data.m_jacobians.size();
m_data.m_jacobians.resize(m_data.m_jacobians.size()+ndofA);
m_data.m_deltaVelocitiesUnitImpulse.resize(m_data.m_deltaVelocitiesUnitImpulse.size()+ndofA);
btAssert(m_data.m_jacobians.size() == m_data.m_deltaVelocitiesUnitImpulse.size());
btScalar* jac1=&m_data.m_jacobians[solverConstraint.m_jacAindex];
if(multiBodyA->isMultiDof())
multiBodyA->fillContactJacobianMultiDof(solverConstraint.m_linkA, cp.getPositionWorldOnA(), contactNormal, jac1, m_data.scratch_r, m_data.scratch_v, m_data.scratch_m);
else
multiBodyA->fillContactJacobian(solverConstraint.m_linkA, cp.getPositionWorldOnA(), contactNormal, jac1, m_data.scratch_r, m_data.scratch_v, m_data.scratch_m);
btScalar* delta = &m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
if(multiBodyA->isMultiDof())
multiBodyA->calcAccelerationDeltasMultiDof(&m_data.m_jacobians[solverConstraint.m_jacAindex],delta,m_data.scratch_r, m_data.scratch_v);
else
multiBodyA->calcAccelerationDeltas(&m_data.m_jacobians[solverConstraint.m_jacAindex],delta,m_data.scratch_r, m_data.scratch_v);
btVector3 torqueAxis0 = rel_pos1.cross(contactNormal);
solverConstraint.m_relpos1CrossNormal = torqueAxis0;
solverConstraint.m_contactNormal1 = contactNormal;
} else
{
btVector3 torqueAxis0 = rel_pos1.cross(contactNormal);
solverConstraint.m_relpos1CrossNormal = torqueAxis0;
solverConstraint.m_contactNormal1 = contactNormal;
solverConstraint.m_angularComponentA = rb0 ? rb0->getInvInertiaTensorWorld()*torqueAxis0*rb0->getAngularFactor() : btVector3(0,0,0);
}
if (multiBodyB)
{
if (solverConstraint.m_linkB<0)
{
rel_pos2 = pos2 - multiBodyB->getBasePos();
} else
{
rel_pos2 = pos2 - multiBodyB->getLink(solverConstraint.m_linkB).m_cachedWorldTransform.getOrigin();
}
const int ndofB = (multiBodyB->isMultiDof() ? multiBodyB->getNumDofs() : multiBodyB->getNumLinks()) + 6;
solverConstraint.m_deltaVelBindex = multiBodyB->getCompanionId();
if (solverConstraint.m_deltaVelBindex <0)
{
solverConstraint.m_deltaVelBindex = m_data.m_deltaVelocities.size();
multiBodyB->setCompanionId(solverConstraint.m_deltaVelBindex);
m_data.m_deltaVelocities.resize(m_data.m_deltaVelocities.size()+ndofB);
}
solverConstraint.m_jacBindex = m_data.m_jacobians.size();
m_data.m_jacobians.resize(m_data.m_jacobians.size()+ndofB);
m_data.m_deltaVelocitiesUnitImpulse.resize(m_data.m_deltaVelocitiesUnitImpulse.size()+ndofB);
btAssert(m_data.m_jacobians.size() == m_data.m_deltaVelocitiesUnitImpulse.size());
if(multiBodyB->isMultiDof())
multiBodyB->fillContactJacobianMultiDof(solverConstraint.m_linkB, cp.getPositionWorldOnB(), -contactNormal, &m_data.m_jacobians[solverConstraint.m_jacBindex], m_data.scratch_r, m_data.scratch_v, m_data.scratch_m);
else
multiBodyB->fillContactJacobian(solverConstraint.m_linkB, cp.getPositionWorldOnB(), -contactNormal, &m_data.m_jacobians[solverConstraint.m_jacBindex], m_data.scratch_r, m_data.scratch_v, m_data.scratch_m);
if(multiBodyB->isMultiDof())
multiBodyB->calcAccelerationDeltasMultiDof(&m_data.m_jacobians[solverConstraint.m_jacBindex],&m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex],m_data.scratch_r, m_data.scratch_v);
else
multiBodyB->calcAccelerationDeltas(&m_data.m_jacobians[solverConstraint.m_jacBindex],&m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex],m_data.scratch_r, m_data.scratch_v);
btVector3 torqueAxis1 = rel_pos2.cross(contactNormal);
solverConstraint.m_relpos2CrossNormal = -torqueAxis1;
solverConstraint.m_contactNormal2 = -contactNormal;
} else
{
btVector3 torqueAxis1 = rel_pos2.cross(contactNormal);
solverConstraint.m_relpos2CrossNormal = -torqueAxis1;
solverConstraint.m_contactNormal2 = -contactNormal;
solverConstraint.m_angularComponentB = rb1 ? rb1->getInvInertiaTensorWorld()*-torqueAxis1*rb1->getAngularFactor() : btVector3(0,0,0);
}
{
btVector3 vec;
btScalar denom0 = 0.f;
btScalar denom1 = 0.f;
btScalar* jacB = 0;
btScalar* jacA = 0;
btScalar* lambdaA =0;
btScalar* lambdaB =0;
int ndofA = 0;
if (multiBodyA)
{
ndofA = (multiBodyA->isMultiDof() ? multiBodyA->getNumDofs() : multiBodyA->getNumLinks()) + 6;
jacA = &m_data.m_jacobians[solverConstraint.m_jacAindex];
lambdaA = &m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
for (int i = 0; i < ndofA; ++i)
{
btScalar j = jacA[i] ;
btScalar l =lambdaA[i];
denom0 += j*l;
}
} else
{
if (rb0)
{
vec = ( solverConstraint.m_angularComponentA).cross(rel_pos1);
denom0 = rb0->getInvMass() + contactNormal.dot(vec);
}
}
if (multiBodyB)
{
const int ndofB = (multiBodyB->isMultiDof() ? multiBodyB->getNumDofs() : multiBodyB->getNumLinks()) + 6;
jacB = &m_data.m_jacobians[solverConstraint.m_jacBindex];
lambdaB = &m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex];
for (int i = 0; i < ndofB; ++i)
{
btScalar j = jacB[i] ;
btScalar l =lambdaB[i];
denom1 += j*l;
}
} else
{
if (rb1)
{
vec = ( -solverConstraint.m_angularComponentB).cross(rel_pos2);
denom1 = rb1->getInvMass() + contactNormal.dot(vec);
}
}
btScalar d = denom0+denom1;
if (d>SIMD_EPSILON)
{
solverConstraint.m_jacDiagABInv = relaxation/(d);
} else
{
//disable the constraint row to handle singularity/redundant constraint
solverConstraint.m_jacDiagABInv = 0.f;
}
}
//compute rhs and remaining solverConstraint fields
btScalar restitution = 0.f;
btScalar penetration = isFriction? 0 : cp.getDistance()+infoGlobal.m_linearSlop;
btScalar rel_vel = 0.f;
int ndofA = 0;
int ndofB = 0;
{
btVector3 vel1,vel2;
if (multiBodyA)
{
ndofA = (multiBodyA->isMultiDof() ? multiBodyA->getNumDofs() : multiBodyA->getNumLinks()) + 6;
btScalar* jacA = &m_data.m_jacobians[solverConstraint.m_jacAindex];
for (int i = 0; i < ndofA ; ++i)
rel_vel += multiBodyA->getVelocityVector()[i] * jacA[i];
} else
{
if (rb0)
{
rel_vel += rb0->getVelocityInLocalPoint(rel_pos1).dot(solverConstraint.m_contactNormal1);
}
}
if (multiBodyB)
{
ndofB = (multiBodyB->isMultiDof() ? multiBodyB->getNumDofs() : multiBodyB->getNumLinks()) + 6;
btScalar* jacB = &m_data.m_jacobians[solverConstraint.m_jacBindex];
for (int i = 0; i < ndofB ; ++i)
rel_vel += multiBodyB->getVelocityVector()[i] * jacB[i];
} else
{
if (rb1)
{
rel_vel += rb1->getVelocityInLocalPoint(rel_pos2).dot(solverConstraint.m_contactNormal2);
}
}
solverConstraint.m_friction = cp.m_combinedFriction;
if(!isFriction)
{
restitution = restitutionCurve(rel_vel, cp.m_combinedRestitution);
if (restitution <= btScalar(0.))
{
restitution = 0.f;
}
}
}
///warm starting (or zero if disabled)
//disable warmstarting for btMultiBody, it has issues gaining energy (==explosion)
if (0)//infoGlobal.m_solverMode & SOLVER_USE_WARMSTARTING)
{
solverConstraint.m_appliedImpulse = isFriction ? 0 : cp.m_appliedImpulse * infoGlobal.m_warmstartingFactor;
if (solverConstraint.m_appliedImpulse)
{
if (multiBodyA)
{
btScalar impulse = solverConstraint.m_appliedImpulse;
btScalar* deltaV = &m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacAindex];
if(multiBodyA->isMultiDof())
multiBodyA->applyDeltaVeeMultiDof(deltaV,impulse);
else
multiBodyA->applyDeltaVee(deltaV,impulse);
applyDeltaVee(deltaV,impulse,solverConstraint.m_deltaVelAindex,ndofA);
} else
{
if (rb0)
bodyA->internalApplyImpulse(solverConstraint.m_contactNormal1*bodyA->internalGetInvMass()*rb0->getLinearFactor(),solverConstraint.m_angularComponentA,solverConstraint.m_appliedImpulse);
}
if (multiBodyB)
{
btScalar impulse = solverConstraint.m_appliedImpulse;
btScalar* deltaV = &m_data.m_deltaVelocitiesUnitImpulse[solverConstraint.m_jacBindex];
if(multiBodyB->isMultiDof())
multiBodyB->applyDeltaVeeMultiDof(deltaV,impulse);
else
multiBodyB->applyDeltaVee(deltaV,impulse);
applyDeltaVee(deltaV,impulse,solverConstraint.m_deltaVelBindex,ndofB);
} else
{
if (rb1)
bodyB->internalApplyImpulse(-solverConstraint.m_contactNormal2*bodyB->internalGetInvMass()*rb1->getLinearFactor(),-solverConstraint.m_angularComponentB,-(btScalar)solverConstraint.m_appliedImpulse);
}
}
} else
{
solverConstraint.m_appliedImpulse = 0.f;
}
solverConstraint.m_appliedPushImpulse = 0.f;
{
btScalar positionalError = 0.f;
btScalar velocityError = restitution - rel_vel;// * damping; //note for friction restitution is always set to 0 (check above) so it is acutally velocityError = -rel_vel for friction
btScalar erp = infoGlobal.m_erp2;
if (!infoGlobal.m_splitImpulse || (penetration > infoGlobal.m_splitImpulsePenetrationThreshold))
{
erp = infoGlobal.m_erp;
}
if (penetration>0)
{
positionalError = 0;
velocityError -= penetration / infoGlobal.m_timeStep;
} else
{
positionalError = -penetration * erp/infoGlobal.m_timeStep;
}
btScalar penetrationImpulse = positionalError*solverConstraint.m_jacDiagABInv;
btScalar velocityImpulse = velocityError *solverConstraint.m_jacDiagABInv;
if(!isFriction)
{
if (!infoGlobal.m_splitImpulse || (penetration > infoGlobal.m_splitImpulsePenetrationThreshold))
{
//combine position and velocity into rhs
solverConstraint.m_rhs = penetrationImpulse+velocityImpulse;
solverConstraint.m_rhsPenetration = 0.f;
} else
{
//split position and velocity into rhs and m_rhsPenetration
solverConstraint.m_rhs = velocityImpulse;
solverConstraint.m_rhsPenetration = penetrationImpulse;
}
solverConstraint.m_lowerLimit = 0;
solverConstraint.m_upperLimit = 1e10f;
}
else
{
solverConstraint.m_rhs = velocityImpulse;
solverConstraint.m_rhsPenetration = 0.f;
solverConstraint.m_lowerLimit = -solverConstraint.m_friction;
solverConstraint.m_upperLimit = solverConstraint.m_friction;
}
solverConstraint.m_cfm = 0.f; //why not use cfmSlip?
}
}
/// Changes a btManifoldPoint collision normal to the normal from the mesh.
void btAdjustInternalEdgeContacts(btManifoldPoint& cp, const btCollisionObjectWrapper* colObj0Wrap,const btCollisionObjectWrapper* colObj1Wrap, int partId0, int index0, int normalAdjustFlags)
{
//btAssert(colObj0->getCollisionShape()->getShapeType() == TRIANGLE_SHAPE_PROXYTYPE);
if (colObj0Wrap->getCollisionShape()->getShapeType() != TRIANGLE_SHAPE_PROXYTYPE)
return;
btBvhTriangleMeshShape* trimesh = 0;
if( colObj0Wrap->getCollisionObject()->getCollisionShape()->getShapeType() == SCALED_TRIANGLE_MESH_SHAPE_PROXYTYPE )
trimesh = ((btScaledBvhTriangleMeshShape*)colObj0Wrap->getCollisionObject()->getCollisionShape())->getChildShape();
else
trimesh = (btBvhTriangleMeshShape*)colObj0Wrap->getCollisionObject()->getCollisionShape();
btTriangleInfoMap* triangleInfoMapPtr = (btTriangleInfoMap*) trimesh->getTriangleInfoMap();
if (!triangleInfoMapPtr)
return;
int hash = btGetHash(partId0,index0);
btTriangleInfo* info = triangleInfoMapPtr->find(hash);
if (!info)
return;
btScalar frontFacing = (normalAdjustFlags & BT_TRIANGLE_CONVEX_BACKFACE_MODE)==0? 1.f : -1.f;
const btTriangleShape* tri_shape = static_cast<const btTriangleShape*>(colObj0Wrap->getCollisionShape());
btVector3 v0,v1,v2;
tri_shape->getVertex(0,v0);
tri_shape->getVertex(1,v1);
tri_shape->getVertex(2,v2);
//btVector3 center = (v0+v1+v2)*btScalar(1./3.);
btVector3 red(1,0,0), green(0,1,0),blue(0,0,1),white(1,1,1),black(0,0,0);
btVector3 tri_normal;
tri_shape->calcNormal(tri_normal);
//btScalar dot = tri_normal.dot(cp.m_normalWorldOnB);
btVector3 nearest;
btNearestPointInLineSegment(cp.m_localPointB,v0,v1,nearest);
btVector3 contact = cp.m_localPointB;
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
const btTransform& tr = colObj0->getWorldTransform();
btDebugDrawLine(tr*nearest,tr*cp.m_localPointB,red);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
bool isNearEdge = false;
int numConcaveEdgeHits = 0;
int numConvexEdgeHits = 0;
btVector3 localContactNormalOnB = colObj0Wrap->getWorldTransform().getBasis().transpose() * cp.m_normalWorldOnB;
localContactNormalOnB.normalize();//is this necessary?
// Get closest edge
int bestedge=-1;
btScalar disttobestedge=BT_LARGE_FLOAT;
//
// Edge 0 -> 1
if (btFabs(info->m_edgeV0V1Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
btVector3 nearest;
btNearestPointInLineSegment( cp.m_localPointB, v0, v1, nearest );
btScalar len=(contact-nearest).length();
//
if( len < disttobestedge )
{
bestedge=0;
disttobestedge=len;
}
}
// Edge 1 -> 2
if (btFabs(info->m_edgeV1V2Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
btVector3 nearest;
btNearestPointInLineSegment( cp.m_localPointB, v1, v2, nearest );
btScalar len=(contact-nearest).length();
//
if( len < disttobestedge )
{
bestedge=1;
disttobestedge=len;
}
}
// Edge 2 -> 0
if (btFabs(info->m_edgeV2V0Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
btVector3 nearest;
btNearestPointInLineSegment( cp.m_localPointB, v2, v0, nearest );
btScalar len=(contact-nearest).length();
//
if( len < disttobestedge )
{
bestedge=2;
disttobestedge=len;
}
}
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 upfix=tri_normal * btVector3(0.1f,0.1f,0.1f);
btDebugDrawLine(tr * v0 + upfix, tr * v1 + upfix, red );
#endif
if (btFabs(info->m_edgeV0V1Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*contact,tr*(contact+cp.m_normalWorldOnB*10),black);
#endif
btScalar len = (contact-nearest).length();
if(len<triangleInfoMapPtr->m_edgeDistanceThreshold)
if( bestedge==0 )
{
btVector3 edge(v0-v1);
isNearEdge = true;
if (info->m_edgeV0V1Angle==btScalar(0))
{
numConcaveEdgeHits++;
} else
{
bool isEdgeConvex = (info->m_flags & TRI_INFO_V0V1_CONVEX);
btScalar swapFactor = isEdgeConvex ? btScalar(1) : btScalar(-1);
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*(nearest+swapFactor*tri_normal*10),white);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 nA = swapFactor * tri_normal;
btQuaternion orn(edge,info->m_edgeV0V1Angle);
btVector3 computedNormalB = quatRotate(orn,tri_normal);
if (info->m_flags & TRI_INFO_V0V1_SWAP_NORMALB)
computedNormalB*=-1;
btVector3 nB = swapFactor*computedNormalB;
btScalar NdotA = localContactNormalOnB.dot(nA);
btScalar NdotB = localContactNormalOnB.dot(nB);
bool backFacingNormal = (NdotA< triangleInfoMapPtr->m_convexEpsilon) && (NdotB<triangleInfoMapPtr->m_convexEpsilon);
#ifdef DEBUG_INTERNAL_EDGE
{
btDebugDrawLine(cp.getPositionWorldOnB(),cp.getPositionWorldOnB()+tr.getBasis()*(nB*20),red);
}
#endif //DEBUG_INTERNAL_EDGE
if (backFacingNormal)
{
numConcaveEdgeHits++;
}
else
{
numConvexEdgeHits++;
btVector3 clampedLocalNormal;
bool isClamped = btClampNormal(edge,swapFactor*tri_normal,localContactNormalOnB, info->m_edgeV0V1Angle,clampedLocalNormal);
if (isClamped)
{
if (((normalAdjustFlags & BT_TRIANGLE_CONVEX_DOUBLE_SIDED)!=0) || (clampedLocalNormal.dot(frontFacing*tri_normal)>0))
{
btVector3 newNormal = colObj0Wrap->getWorldTransform().getBasis() * clampedLocalNormal;
// cp.m_distance1 = cp.m_distance1 * newNormal.dot(cp.m_normalWorldOnB);
cp.m_normalWorldOnB = newNormal;
// Reproject collision point along normal. (what about cp.m_distance1?)
cp.m_positionWorldOnB = cp.m_positionWorldOnA - cp.m_normalWorldOnB * cp.m_distance1;
cp.m_localPointB = colObj0Wrap->getWorldTransform().invXform(cp.m_positionWorldOnB);
}
}
}
}
}
}
btNearestPointInLineSegment(contact,v1,v2,nearest);
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*cp.m_localPointB,green);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr * v1 + upfix, tr * v2 + upfix , green );
#endif
if (btFabs(info->m_edgeV1V2Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*contact,tr*(contact+cp.m_normalWorldOnB*10),black);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btScalar len = (contact-nearest).length();
if(len<triangleInfoMapPtr->m_edgeDistanceThreshold)
if( bestedge==1 )
{
isNearEdge = true;
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*(nearest+tri_normal*10),white);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 edge(v1-v2);
isNearEdge = true;
if (info->m_edgeV1V2Angle == btScalar(0))
{
numConcaveEdgeHits++;
} else
{
bool isEdgeConvex = (info->m_flags & TRI_INFO_V1V2_CONVEX)!=0;
btScalar swapFactor = isEdgeConvex ? btScalar(1) : btScalar(-1);
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*(nearest+swapFactor*tri_normal*10),white);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 nA = swapFactor * tri_normal;
btQuaternion orn(edge,info->m_edgeV1V2Angle);
btVector3 computedNormalB = quatRotate(orn,tri_normal);
if (info->m_flags & TRI_INFO_V1V2_SWAP_NORMALB)
computedNormalB*=-1;
btVector3 nB = swapFactor*computedNormalB;
#ifdef DEBUG_INTERNAL_EDGE
{
btDebugDrawLine(cp.getPositionWorldOnB(),cp.getPositionWorldOnB()+tr.getBasis()*(nB*20),red);
}
#endif //DEBUG_INTERNAL_EDGE
btScalar NdotA = localContactNormalOnB.dot(nA);
btScalar NdotB = localContactNormalOnB.dot(nB);
bool backFacingNormal = (NdotA< triangleInfoMapPtr->m_convexEpsilon) && (NdotB<triangleInfoMapPtr->m_convexEpsilon);
if (backFacingNormal)
{
numConcaveEdgeHits++;
}
else
{
numConvexEdgeHits++;
btVector3 localContactNormalOnB = colObj0Wrap->getWorldTransform().getBasis().transpose() * cp.m_normalWorldOnB;
btVector3 clampedLocalNormal;
bool isClamped = btClampNormal(edge,swapFactor*tri_normal,localContactNormalOnB, info->m_edgeV1V2Angle,clampedLocalNormal);
if (isClamped)
{
if (((normalAdjustFlags & BT_TRIANGLE_CONVEX_DOUBLE_SIDED)!=0) || (clampedLocalNormal.dot(frontFacing*tri_normal)>0))
{
btVector3 newNormal = colObj0Wrap->getWorldTransform().getBasis() * clampedLocalNormal;
// cp.m_distance1 = cp.m_distance1 * newNormal.dot(cp.m_normalWorldOnB);
cp.m_normalWorldOnB = newNormal;
// Reproject collision point along normal.
cp.m_positionWorldOnB = cp.m_positionWorldOnA - cp.m_normalWorldOnB * cp.m_distance1;
cp.m_localPointB = colObj0Wrap->getWorldTransform().invXform(cp.m_positionWorldOnB);
}
}
}
}
}
}
btNearestPointInLineSegment(contact,v2,v0,nearest);
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*cp.m_localPointB,blue);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr * v2 + upfix, tr * v0 + upfix , blue );
#endif
if (btFabs(info->m_edgeV2V0Angle)< triangleInfoMapPtr->m_maxEdgeAngleThreshold)
{
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*contact,tr*(contact+cp.m_normalWorldOnB*10),black);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btScalar len = (contact-nearest).length();
if(len<triangleInfoMapPtr->m_edgeDistanceThreshold)
if( bestedge==2 )
{
isNearEdge = true;
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*(nearest+tri_normal*10),white);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 edge(v2-v0);
if (info->m_edgeV2V0Angle==btScalar(0))
{
numConcaveEdgeHits++;
} else
{
bool isEdgeConvex = (info->m_flags & TRI_INFO_V2V0_CONVEX)!=0;
btScalar swapFactor = isEdgeConvex ? btScalar(1) : btScalar(-1);
#ifdef BT_INTERNAL_EDGE_DEBUG_DRAW
btDebugDrawLine(tr*nearest,tr*(nearest+swapFactor*tri_normal*10),white);
#endif //BT_INTERNAL_EDGE_DEBUG_DRAW
btVector3 nA = swapFactor * tri_normal;
btQuaternion orn(edge,info->m_edgeV2V0Angle);
btVector3 computedNormalB = quatRotate(orn,tri_normal);
if (info->m_flags & TRI_INFO_V2V0_SWAP_NORMALB)
computedNormalB*=-1;
btVector3 nB = swapFactor*computedNormalB;
#ifdef DEBUG_INTERNAL_EDGE
{
btDebugDrawLine(cp.getPositionWorldOnB(),cp.getPositionWorldOnB()+tr.getBasis()*(nB*20),red);
}
#endif //DEBUG_INTERNAL_EDGE
btScalar NdotA = localContactNormalOnB.dot(nA);
btScalar NdotB = localContactNormalOnB.dot(nB);
bool backFacingNormal = (NdotA< triangleInfoMapPtr->m_convexEpsilon) && (NdotB<triangleInfoMapPtr->m_convexEpsilon);
if (backFacingNormal)
{
numConcaveEdgeHits++;
}
else
{
numConvexEdgeHits++;
// printf("hitting convex edge\n");
btVector3 localContactNormalOnB = colObj0Wrap->getWorldTransform().getBasis().transpose() * cp.m_normalWorldOnB;
btVector3 clampedLocalNormal;
bool isClamped = btClampNormal(edge,swapFactor*tri_normal,localContactNormalOnB,info->m_edgeV2V0Angle,clampedLocalNormal);
if (isClamped)
{
if (((normalAdjustFlags & BT_TRIANGLE_CONVEX_DOUBLE_SIDED)!=0) || (clampedLocalNormal.dot(frontFacing*tri_normal)>0))
{
btVector3 newNormal = colObj0Wrap->getWorldTransform().getBasis() * clampedLocalNormal;
// cp.m_distance1 = cp.m_distance1 * newNormal.dot(cp.m_normalWorldOnB);
cp.m_normalWorldOnB = newNormal;
// Reproject collision point along normal.
cp.m_positionWorldOnB = cp.m_positionWorldOnA - cp.m_normalWorldOnB * cp.m_distance1;
cp.m_localPointB = colObj0Wrap->getWorldTransform().invXform(cp.m_positionWorldOnB);
}
}
}
}
}
}
#ifdef DEBUG_INTERNAL_EDGE
{
btVector3 color(0,1,1);
btDebugDrawLine(cp.getPositionWorldOnB(),cp.getPositionWorldOnB()+cp.m_normalWorldOnB*10,color);
}
#endif //DEBUG_INTERNAL_EDGE
if (isNearEdge)
{
if (numConcaveEdgeHits>0)
{
if ((normalAdjustFlags & BT_TRIANGLE_CONCAVE_DOUBLE_SIDED)!=0)
{
//fix tri_normal so it pointing the same direction as the current local contact normal
if (tri_normal.dot(localContactNormalOnB) < 0)
{
tri_normal *= -1;
}
cp.m_normalWorldOnB = colObj0Wrap->getWorldTransform().getBasis()*tri_normal;
} else
{
btVector3 newNormal = tri_normal *frontFacing;
//if the tri_normal is pointing opposite direction as the current local contact normal, skip it
btScalar d = newNormal.dot(localContactNormalOnB) ;
if (d< 0)
{
return;
}
//modify the normal to be the triangle normal (or backfacing normal)
cp.m_normalWorldOnB = colObj0Wrap->getWorldTransform().getBasis() *newNormal;
}
// Reproject collision point along normal.
cp.m_positionWorldOnB = cp.m_positionWorldOnA - cp.m_normalWorldOnB * cp.m_distance1;
cp.m_localPointB = colObj0Wrap->getWorldTransform().invXform(cp.m_positionWorldOnB);
}
}
}
bool GameWorld::ContactProcessedCallback(btManifoldPoint &mp, void *body0, void *body1)
{
auto obA = static_cast<btCollisionObject*>(body0);
auto obB = static_cast<btCollisionObject*>(body1);
if( !( obA->getUserPointer() && obB->getUserPointer() ) ) {
return false;
}
GameObject* a = static_cast<GameObject*>(obA->getUserPointer());
GameObject* b = static_cast<GameObject*>(obB->getUserPointer());
bool valA = a && a->type() == GameObject::Instance;
bool valB = b && b->type() == GameObject::Instance;
if( ! (valA && valB) && (valB || valA) ) {
// Figure out which is the dynamic instance.
InstanceObject* dynInst = nullptr;
const btRigidBody* instBody = nullptr, * otherBody = nullptr;
btVector3 src, dmg;
if( valA ) {
dynInst = static_cast<InstanceObject*>(a);
instBody = static_cast<const btRigidBody*>(obA);
otherBody = static_cast<const btRigidBody*>(obB);
src = mp.getPositionWorldOnB();
dmg = mp.getPositionWorldOnA();
}
else {
dynInst = static_cast<InstanceObject*>(b);
instBody = static_cast<const btRigidBody*>(obB);
otherBody = static_cast<const btRigidBody*>(obA);
src = mp.getPositionWorldOnA();
dmg = mp.getPositionWorldOnB();
}
if( dynInst->dynamics != nullptr && instBody->isStaticObject() ) {
// Attempt to determine relative velocity.
auto dV = (otherBody->getLinearVelocity());
auto impulse = dV.length()/ (otherBody->getInvMass());
if( dynInst->dynamics->uprootForce <= impulse ) {
dynInst->takeDamage({
{dmg.x(), dmg.y(), dmg.z()},
{src.x(), src.y(), src.z()},
0.f,
GameObject::DamageInfo::Physics,
impulse
});
}
}
}
// Handle vehicles
if(a) handleVehicleResponse(a, mp, true);
if(b) handleVehicleResponse(b, mp, false);
return true;
}
