bool Foam::meshTriangulation::isInternalFace
(
const primitiveMesh& mesh,
const boolList& includedCell,
const label faceI
)
{
if (mesh.isInternalFace(faceI))
{
label own = mesh.faceOwner()[faceI];
label nei = mesh.faceNeighbour()[faceI];
if (includedCell[own] && includedCell[nei])
{
// Neighbouring cell will get included in subset
// as well so face is internal.
return true;
}
else
{
return false;
}
}
else
{
return false;
}
}
void Foam::directions::writeOBJ
(
const fileName& fName,
const primitiveMesh& mesh,
const vectorField& dirs
)
{
Pout<< "Writing cell info to " << fName << " as vectors at the cellCentres"
<< endl << endl;
OFstream xDirStream(fName);
label vertI = 0;
forAll(dirs, celli)
{
const point& ctr = mesh.cellCentres()[celli];
// Calculate local length scale
scalar minDist = great;
const labelList& nbrs = mesh.cellCells()[celli];
forAll(nbrs, nbrI)
{
minDist = min(minDist, mag(mesh.cellCentres()[nbrs[nbrI]] - ctr));
}
scalar scale = 0.5*minDist;
writeOBJ(xDirStream, ctr, ctr + scale*dirs[celli], vertI);
}
void Foam::cuttingPlane::calcCutCells
(
const primitiveMesh& mesh,
const scalarField& dotProducts,
const labelUList& cellIdLabels
)
{
const labelListList& cellEdges = mesh.cellEdges();
const edgeList& edges = mesh.edges();
label listSize = cellEdges.size();
if (notNull(cellIdLabels))
{
listSize = cellIdLabels.size();
}
cutCells_.setSize(listSize);
label cutcellI(0);
// Find the cut cells by detecting any cell that uses points with
// opposing dotProducts.
for (label listI = 0; listI < listSize; ++listI)
{
label cellI = listI;
if (notNull(cellIdLabels))
{
cellI = cellIdLabels[listI];
}
const labelList& cEdges = cellEdges[cellI];
label nCutEdges = 0;
forAll(cEdges, i)
{
const edge& e = edges[cEdges[i]];
if
(
(dotProducts[e[0]] < zeroish && dotProducts[e[1]] > positive)
|| (dotProducts[e[1]] < zeroish && dotProducts[e[0]] > positive)
)
{
nCutEdges++;
if (nCutEdges > 2)
{
cutCells_[cutcellI++] = cellI;
break;
}
}
}
}
// Set correct list size
cutCells_.setSize(cutcellI);
}
// Determine for each edge the intersection point. Calculates
// - cutPoints_ : coordinates of all intersection points
// - edgePoint : per edge -1 or the index into cutPoints
void Foam::cuttingPlane::intersectEdges
(
const primitiveMesh& mesh,
const scalarField& dotProducts,
List<label>& edgePoint
)
{
// Use the dotProducts to find out the cut edges.
const edgeList& edges = mesh.edges();
const pointField& points = mesh.points();
// Per edge -1 or the label of the intersection point
edgePoint.setSize(edges.size());
DynamicList<point> dynCuttingPoints(4*cutCells_.size());
forAll(edges, edgeI)
{
const edge& e = edges[edgeI];
if
(
(dotProducts[e[0]] < zeroish && dotProducts[e[1]] > positive)
|| (dotProducts[e[1]] < zeroish && dotProducts[e[0]] > positive)
)
{
// Edge is cut
edgePoint[edgeI] = dynCuttingPoints.size();
const point& p0 = points[e[0]];
const point& p1 = points[e[1]];
scalar alpha = lineIntersect(linePointRef(p0, p1));
if (alpha < zeroish)
{
dynCuttingPoints.append(p0);
}
else if (alpha >= 1.0)
{
dynCuttingPoints.append(p1);
}
else
{
dynCuttingPoints.append((1-alpha)*p0 + alpha*p1);
}
}
else
{
edgePoint[edgeI] = -1;
}
}
this->storedPoints().transfer(dynCuttingPoints);
}
Foam::point Foam::directionInfo::eMid
(
const primitiveMesh& mesh,
const label edgeI
)
{
const edge& e = mesh.edges()[edgeI];
return
0.5
* (mesh.points()[e.start()] + mesh.points()[e.end()]);
}
// Find label of face.
label findFace(const primitiveMesh& mesh, const face& f)
{
const labelList& pFaces = mesh.pointFaces()[f[0]];
forAll(pFaces, i)
{
label faceI = pFaces[i];
if (mesh.faces()[faceI] == f)
{
return faceI;
}
}
// Step across point to other edge on face
Foam::label Foam::regionSide::otherEdge
(
const primitiveMesh& mesh,
const label faceI,
const label edgeI,
const label pointI
)
{
const edge& e = mesh.edges()[edgeI];
// Get other point on edge.
label freePointI = e.otherVertex(pointI);
const labelList& fEdges = mesh.faceEdges()[faceI];
forAll(fEdges, fEdgeI)
{
const label otherEdgeI = fEdges[fEdgeI];
const edge& otherE = mesh.edges()[otherEdgeI];
if
(
(
otherE.start() == pointI
&& otherE.end() != freePointI
)
|| (
otherE.end() == pointI
&& otherE.start() != freePointI
)
)
{
// otherE shares one (but not two) points with e.
return otherEdgeI;
}
}
FatalErrorIn
(
"regionSide::otherEdge(const primitiveMesh&, const label, const label"
", const label)"
) << "Cannot find other edge on face " << faceI << " that uses point "
<< pointI << " but not point " << freePointI << endl
<< "Edges on face:" << fEdges
<< " verts:" << UIndirectList<edge>(mesh.edges(), fEdges)()
<< " Vertices on face:"
<< mesh.faces()[faceI]
<< " Vertices on original edge:" << e << abort(FatalError);
return -1;
}
Foam::cellShape Foam::degenerateMatcher::match
(
const primitiveMesh& mesh,
const label cellI
)
{
return match
(
mesh.faces(),
mesh.faceOwner(),
cellI,
mesh.cells()[cellI]
);
}
// Find edge between points v0 and v1.
label findEdge(const primitiveMesh& mesh, const label v0, const label v1)
{
const labelList& pEdges = mesh.pointEdges()[v0];
forAll(pEdges, pEdgeI)
{
label edgeI = pEdges[pEdgeI];
const edge& e = mesh.edges()[edgeI];
if (e.otherVertex(v0) == v1)
{
return edgeI;
}
}
void Foam::multiDirRefinement::addCells
(
const primitiveMesh& mesh,
const Map<label>& splitMap
)
{
// Construct inverse addressing: from new to original cell.
labelList origCell(mesh.nCells(), -1);
forAll(addedCells_, cellI)
{
const labelList& added = addedCells_[cellI];
forAll(added, i)
{
label slave = added[i];
if (origCell[slave] == -1)
{
origCell[slave] = cellI;
}
else if (origCell[slave] != cellI)
{
FatalErrorIn
(
"multiDirRefinement::addCells(const primitiveMesh&"
", const Map<label>&"
) << "Added cell " << slave << " has two different masters:"
<< origCell[slave] << " , " << cellI
<< abort(FatalError);
}
}
}
Foam::scalar Foam::primitiveMeshTools::faceSkewness
(
const primitiveMesh& mesh,
const pointField& p,
const vectorField& fCtrs,
const vectorField& fAreas,
const label faceI,
const point& ownCc,
const point& neiCc
)
{
vector Cpf = fCtrs[faceI] - ownCc;
vector d = neiCc - ownCc;
// Skewness vector
vector sv =
Cpf
- ((fAreas[faceI] & Cpf)/((fAreas[faceI] & d) + ROOTVSMALL))*d;
vector svHat = sv/(mag(sv) + ROOTVSMALL);
// Normalisation distance calculated as the approximate distance
// from the face centre to the edge of the face in the direction
// of the skewness
scalar fd = 0.2*mag(d) + ROOTVSMALL;
const face& f = mesh.faces()[faceI];
forAll(f, pi)
{
fd = max(fd, mag(svHat & (p[f[pi]] - fCtrs[faceI])));
}
void Foam::cellSet::writeDebug
(
Ostream& os,
const primitiveMesh& mesh,
const label maxLen
) const
{
topoSet::writeDebug(os, mesh.cellCentres(), maxLen);
}
void Foam::meshTriangulation::getFaces
(
const primitiveMesh& mesh,
const boolList& includedCell,
boolList& faceIsCut,
label& nFaces,
label& nInternalFaces
)
{
// All faces to be triangulated.
faceIsCut.setSize(mesh.nFaces());
faceIsCut = false;
nFaces = 0;
nInternalFaces = 0;
forAll(includedCell, cellI)
{
// Include faces of cut cells only.
if (includedCell[cellI])
{
const labelList& cFaces = mesh.cells()[cellI];
forAll(cFaces, i)
{
label faceI = cFaces[i];
if (!faceIsCut[faceI])
{
// First visit of face.
nFaces++;
faceIsCut[faceI] = true;
// See if would become internal or external face
if (isInternalFace(mesh, includedCell, faceI))
{
nInternalFaces++;
}
}
}
}
}
// Step across point to other edge on face
Foam::label Foam::regionSide::otherEdge
(
const primitiveMesh& mesh,
const label faceI,
const label edgeI,
const label pointI
)
{
const edge& e = mesh.edges()[edgeI];
// Get other point on edge.
label freePointI = e.otherVertex(pointI);
const labelList& fEdges = mesh.faceEdges()[faceI];
forAll(fEdges, fEdgeI)
{
label otherEdgeI = fEdges[fEdgeI];
const edge& otherE = mesh.edges()[otherEdgeI];
if
(
(
otherE.start() == pointI
&& otherE.end() != freePointI
)
|| (
otherE.end() == pointI
&& otherE.start() != freePointI
)
)
{
// otherE shares one (but not two) points with e.
return otherEdgeI;
}
}
// Return true if any cells had to be split to keep a difference between
// neighbouring refinement levels < limitDiff. Puts cells into refCells and
// update refLevel to account for refinement.
bool limitRefinementLevel
(
const primitiveMesh& mesh,
labelList& refLevel,
cellSet& refCells
)
{
const labelListList& cellCells = mesh.cellCells();
label oldNCells = refCells.size();
forAll(cellCells, celli)
{
const labelList& cCells = cellCells[celli];
forAll(cCells, i)
{
if (refLevel[cCells[i]] > (refLevel[celli]+1))
{
// Found neighbour with >=2 difference in refLevel.
refCells.insert(celli);
refLevel[celli]++;
break;
}
}
}
if (refCells.size() > oldNCells)
{
Info<< "Added an additional " << refCells.size() - oldNCells
<< " cells to satisfy 1:2 refinement level"
<< endl;
return true;
}
else
{
return false;
}
}
// Coming from startEdgeI cross the edge to the other face
// across to the next cut edge.
bool Foam::cuttingPlane::walkCell
(
const primitiveMesh& mesh,
const UList<label>& edgePoint,
const label cellI,
const label startEdgeI,
DynamicList<label>& faceVerts
)
{
label faceI = -1;
label edgeI = startEdgeI;
label nIter = 0;
faceVerts.clear();
do
{
faceVerts.append(edgePoint[edgeI]);
// Cross edge to other face
faceI = meshTools::otherFace(mesh, cellI, faceI, edgeI);
// Find next cut edge on face.
const labelList& fEdges = mesh.faceEdges()[faceI];
label nextEdgeI = -1;
//Note: here is where we should check for whether there are more
// than 2 intersections with the face (warped/non-convex face).
// If so should e.g. decompose the cells on both faces and redo
// the calculation.
forAll(fEdges, i)
{
label edge2I = fEdges[i];
if (edge2I != edgeI && edgePoint[edge2I] != -1)
{
nextEdgeI = edge2I;
break;
}
}
if (nextEdgeI == -1)
{
// Did not find another cut edge on faceI. Do what?
WarningIn("Foam::cuttingPlane::walkCell")
<< "Did not find closed walk along surface of cell " << cellI
<< " starting from edge " << startEdgeI
<< " in " << nIter << " iterations." << nl
<< "Collected cutPoints so far:" << faceVerts
<< endl;
return false;
}
edgeI = nextEdgeI;
nIter++;
if (nIter > 1000)
{
WarningIn("Foam::cuttingPlane::walkCell")
<< "Did not find closed walk along surface of cell " << cellI
<< " starting from edge " << startEdgeI
<< " in " << nIter << " iterations." << nl
<< "Collected cutPoints so far:" << faceVerts
<< endl;
return false;
}
} while (edgeI != startEdgeI);
// Step from faceI (on side cellI) to connected face & cell without crossing
// fenceEdges.
void Foam::regionSide::visitConnectedFaces
(
const primitiveMesh& mesh,
const labelHashSet& region,
const labelHashSet& fenceEdges,
const label cellI,
const label faceI,
labelHashSet& visitedFace
)
{
if (!visitedFace.found(faceI))
{
if (debug)
{
Info<< "visitConnectedFaces : cellI:" << cellI << " faceI:"
<< faceI << " isOwner:" << (cellI == mesh.faceOwner()[faceI])
<< endl;
}
// Mark as visited
visitedFace.insert(faceI);
// Mark which side of face was visited.
if (cellI == mesh.faceOwner()[faceI])
{
sideOwner_.insert(faceI);
}
// Visit all neighbouring faces on faceSet. Stay on this 'side' of
// face by doing edge-face-cell walk.
const labelList& fEdges = mesh.faceEdges()[faceI];
forAll(fEdges, fEdgeI)
{
label edgeI = fEdges[fEdgeI];
if (!fenceEdges.found(edgeI))
{
// Step along faces on edge from cell to cell until
// we hit face on faceSet.
// Find face reachable from edge
label otherFaceI = otherFace(mesh, cellI, faceI, edgeI);
if (mesh.isInternalFace(otherFaceI))
{
label otherCellI = cellI;
// Keep on crossing faces/cells until back on face on
// surface
while (!region.found(otherFaceI))
{
visitedFace.insert(otherFaceI);
if (debug)
{
Info<< "visitConnectedFaces : cellI:" << cellI
<< " found insideEdgeFace:" << otherFaceI
<< endl;
}
// Cross otherFaceI into neighbouring cell
otherCellI =
meshTools::otherCell
(
mesh,
otherCellI,
otherFaceI
);
otherFaceI =
otherFace
(
mesh,
otherCellI,
otherFaceI,
edgeI
);
}
visitConnectedFaces
(
mesh,
region,
fenceEdges,
otherCellI,
otherFaceI,
visitedFace
);
}
}
}
}
// Given sin and cos of max angle between normals calculate whether f0 and f1
// on celli make larger angle. Uses sinAngle only for quadrant detection.
bool largerAngle
(
const primitiveMesh& mesh,
const scalar cosAngle,
const scalar sinAngle,
const label celli,
const label f0, // face label
const label f1,
const vector& n0, // normal at f0
const vector& n1
)
{
const labelList& own = mesh.faceOwner();
bool sameFaceOrder = !((own[f0] == celli) ^ (own[f1] == celli));
// Get cos between faceArea vectors. Correct so flat angle (180 degrees)
// gives -1.
scalar normalCosAngle = n0 & n1;
if (sameFaceOrder)
{
normalCosAngle = -normalCosAngle;
}
// Get cos between faceCentre and normal vector to determine in
// which quadrant angle is. (Is correct for unwarped faces only!)
// Correct for non-outwards pointing normal.
vector c1c0(mesh.faceCentres()[f1] - mesh.faceCentres()[f0]);
c1c0 /= mag(c1c0) + VSMALL;
scalar fcCosAngle = n0 & c1c0;
if (own[f0] != celli)
{
fcCosAngle = -fcCosAngle;
}
if (sinAngle < 0.0)
{
// Looking for concave angles (quadrant 3 or 4)
if (fcCosAngle <= 0)
{
// Angle is convex so smaller.
return false;
}
else
{
if (normalCosAngle < cosAngle)
{
return false;
}
else
{
return true;
}
}
}
else
{
// Looking for convex angles (quadrant 1 or 2)
if (fcCosAngle > 0)
{
// Concave angle
return true;
}
else
{
// Convex. Check cos of normal vectors.
if (normalCosAngle > cosAngle)
{
return false;
}
else
{
return true;
}
}
}
}
// Calculate some edge statistics on mesh.
void printEdgeStats(const primitiveMesh& mesh)
{
label nX = 0;
label nY = 0;
label nZ = 0;
scalar minX = GREAT;
scalar maxX = -GREAT;
vector x(1, 0, 0);
scalar minY = GREAT;
scalar maxY = -GREAT;
vector y(0, 1, 0);
scalar minZ = GREAT;
scalar maxZ = -GREAT;
vector z(0, 0, 1);
scalar minOther = GREAT;
scalar maxOther = -GREAT;
const edgeList& edges = mesh.edges();
forAll (edges, edgeI)
{
const edge& e = edges[edgeI];
vector eVec(e.vec(mesh.points()));
scalar eMag = mag(eVec);
eVec /= eMag;
if (mag(eVec & x) > 1 - edgeTol)
{
minX = min(minX, eMag);
maxX = max(maxX, eMag);
nX++;
}
else if (mag(eVec & y) > 1 - edgeTol)
{
minY = min(minY, eMag);
maxY = max(maxY, eMag);
nY++;
}
else if (mag(eVec & z) > 1 - edgeTol)
{
minZ = min(minZ, eMag);
maxZ = max(maxZ, eMag);
nZ++;
}
else
{
minOther = min(minOther, eMag);
maxOther = max(maxOther, eMag);
}
}
Pout<< "Mesh edge statistics:" << endl
<< " x aligned : number:" << nX << "\tminLen:" << minX
<< "\tmaxLen:" << maxX << endl
<< " y aligned : number:" << nY << "\tminLen:" << minY
<< "\tmaxLen:" << maxY << endl
<< " z aligned : number:" << nZ << "\tminLen:" << minZ
<< "\tmaxLen:" << maxZ << endl
<< " other : number:" << mesh.nEdges() - nX - nY - nZ
<< "\tminLen:" << minOther
<< "\tmaxLen:" << maxOther << endl << endl;
}
void writePointSet
(
const bool binary,
const primitiveMesh& mesh,
const topoSet& set,
const fileName& fileName
)
{
std::ofstream pStream(fileName.c_str());
pStream
<< "# vtk DataFile Version 2.0" << std::endl
<< set.name() << std::endl;
if (binary)
{
pStream << "BINARY" << std::endl;
}
else
{
pStream << "ASCII" << std::endl;
}
pStream << "DATASET POLYDATA" << std::endl;
//------------------------------------------------------------------
//
// Write topology
//
//------------------------------------------------------------------
labelList pointLabels(set.toc());
pointField setPoints(mesh.points(), pointLabels);
// Write points
pStream << "POINTS " << pointLabels.size() << " float" << std::endl;
DynamicList<floatScalar> ptField(3*pointLabels.size());
writeFuns::insert(setPoints, ptField);
writeFuns::write(pStream, binary, ptField);
//-----------------------------------------------------------------
//
// Write data
//
//-----------------------------------------------------------------
// Write pointID
pStream
<< "POINT_DATA " << pointLabels.size() << std::endl
<< "FIELD attributes 1" << std::endl;
// Cell ids first
pStream << "pointID 1 " << pointLabels.size() << " int" << std::endl;
writeFuns::write(pStream, binary, pointLabels);
}
// Calculate some edge statistics on mesh. Return min. edge length over all
// directions but exclude component (0=x, 1=y, 2=z, other=none)
scalar getEdgeStats(const primitiveMesh& mesh, const direction excludeCmpt)
{
label nX = 0;
label nY = 0;
label nZ = 0;
scalar minX = GREAT;
scalar maxX = -GREAT;
vector x(1, 0, 0);
scalar minY = GREAT;
scalar maxY = -GREAT;
vector y(0, 1, 0);
scalar minZ = GREAT;
scalar maxZ = -GREAT;
vector z(0, 0, 1);
scalar minOther = GREAT;
scalar maxOther = -GREAT;
const edgeList& edges = mesh.edges();
forAll(edges, edgeI)
{
const edge& e = edges[edgeI];
vector eVec(e.vec(mesh.points()));
scalar eMag = mag(eVec);
eVec /= eMag;
if (mag(eVec & x) > 1-edgeTol)
{
minX = min(minX, eMag);
maxX = max(maxX, eMag);
nX++;
}
else if (mag(eVec & y) > 1-edgeTol)
{
minY = min(minY, eMag);
maxY = max(maxY, eMag);
nY++;
}
else if (mag(eVec & z) > 1-edgeTol)
{
minZ = min(minZ, eMag);
maxZ = max(maxZ, eMag);
nZ++;
}
else
{
minOther = min(minOther, eMag);
maxOther = max(maxOther, eMag);
}
}
Info<< "Mesh bounding box:" << boundBox(mesh.points()) << nl << nl
<< "Mesh edge statistics:" << nl
<< " x aligned : number:" << nX << "\tminLen:" << minX
<< "\tmaxLen:" << maxX << nl
<< " y aligned : number:" << nY << "\tminLen:" << minY
<< "\tmaxLen:" << maxY << nl
<< " z aligned : number:" << nZ << "\tminLen:" << minZ
<< "\tmaxLen:" << maxZ << nl
<< " other : number:" << mesh.nEdges() - nX - nY - nZ
<< "\tminLen:" << minOther
<< "\tmaxLen:" << maxOther << nl << endl;
if (excludeCmpt == 0)
{
return min(minY, min(minZ, minOther));
}
else if (excludeCmpt == 1)
{
return min(minX, min(minZ, minOther));
}
else if (excludeCmpt == 2)
{
return min(minX, min(minY, minOther));
}
else
{
return min(minX, min(minY, min(minZ, minOther)));
}
}
