Exemplo n.º 1
0
	virtual bool TransferDataFromWindow()
    {
		wxFileName fileName = m_filePicker->GetFileName();
		if (fileName.FileExists())
		{
			alertDlg("Project file is already exist.\nSelect other filename.", this);
			m_filePicker->SetFocus();
			return false;
		}

		if (!fileName.IsOk())
		{
			alertDlg("Project file name is empty or invalid.", this);
			m_filePicker->SetFocus();
			return false;
		}

		if (m_textName->GetLabelText().IsEmpty())
		{
			alertDlg("Project name is empty.", this);
			m_textName->SetFocus();
			return false;
		}

		return true;
	}
Exemplo n.º 2
0
    // Select the currently actively field.
    void HighlightCurrentField()
    {
        m_text->SetFocus();

        const CharRange range = GetFieldRange(m_currentField);

        m_text->SetSelection(range.from, range.to);
    }
void DIALOG_LABEL_EDITOR::InitDialog()
{
    wxString msg;
    bool multiLine = false;

    if( m_CurrentText->IsMultilineAllowed() )
    {
        m_textLabel = m_textLabelMultiLine;
        m_textLabelSingleLine->Show( false );
        multiLine = true;
    }
    else
    {
        m_textLabel = m_textLabelSingleLine;
        m_textLabelMultiLine->Show( false );
        wxTextValidator* validator = (wxTextValidator*) m_textLabel->GetValidator();
        wxArrayString excludes;

        // Add invalid label characters to this list.
        excludes.Add( wxT( " " ) );
        validator->SetExcludes( excludes );
    }

    m_textLabel->SetValue( m_CurrentText->GetText() );
    m_textLabel->SetFocus();

    switch( m_CurrentText->Type() )
    {
    case SCH_GLOBAL_LABEL_T:
        SetTitle( _( "Global Label Properties" ) );
        break;

    case SCH_HIERARCHICAL_LABEL_T:
        SetTitle( _( "Hierarchical Label Properties" ) );
        break;

    case SCH_LABEL_T:
        SetTitle( _( "Label Properties" ) );
        break;

    case SCH_SHEET_PIN_T:
        SetTitle( _( "Hierarchical Sheet Pin Properties." ) );
        break;

    default:
        SetTitle( _( "Text Properties" ) );
        break;
    }

    const int MINTEXTWIDTH = 40;    // M's are big characters, a few establish a lot of width

    int max_len = 0;

    if ( !multiLine )
    {
        max_len = m_CurrentText->GetText().Length();
    }
    else
    {
        // calculate the length of the biggest line
        // we cannot use the length of the entire text that has no meaning
        int curr_len = MINTEXTWIDTH;
        int imax = m_CurrentText->GetText().Length();

        for( int count = 0; count < imax; count++ )
        {
            if( m_CurrentText->GetText()[count] == '\n' ||
                m_CurrentText->GetText()[count] == '\r' ) // new line
            {
                curr_len = 0;
            }
            else
            {
                curr_len++;

                if ( max_len < curr_len )
                    max_len = curr_len;
            }
        }
    }

    if( max_len < MINTEXTWIDTH )
        max_len = MINTEXTWIDTH;

    wxString textWidth;
    textWidth.Append( 'M', MINTEXTWIDTH );
    EnsureTextCtrlWidth( m_textLabel, &textWidth );

    // Set validators
    m_TextOrient->SetSelection( m_CurrentText->GetOrientation() );
    m_TextShape->SetSelection( m_CurrentText->GetShape() );

    int style = 0;

    if( m_CurrentText->IsItalic() )
        style = 1;

    if( m_CurrentText->IsBold() )
        style += 2;

    m_TextStyle->SetSelection( style );

    wxString units = ReturnUnitSymbol( g_UserUnit, wxT( "(%s)" ) );
    msg.Printf( _( "H%s x W%s" ), GetChars( units ), GetChars( units ) );
    m_staticSizeUnits->SetLabel( msg );

    msg = StringFromValue( g_UserUnit, m_CurrentText->GetSize().x );
    m_TextSize->SetValue( msg );

    if( m_CurrentText->Type() != SCH_GLOBAL_LABEL_T
     && m_CurrentText->Type() != SCH_HIERARCHICAL_LABEL_T )
    {
        m_TextShape->Show( false );
    }

    m_sdbSizer1OK->SetDefault();
}
Exemplo n.º 4
0
void DIALOG_LABEL_EDITOR::InitDialog()
{
    wxString msg;
    bool multiLine = false;

    if( m_CurrentText->m_MultilineAllowed )
    {
        m_textLabel = m_textLabelMultiLine;
        m_textLabelSingleLine->Show(false);
        multiLine = true;
    }
    else
    {
        m_textLabel = m_textLabelSingleLine;
        m_textLabelMultiLine->Show(false);
    }

    m_textLabel->SetValue( m_CurrentText->m_Text );
    m_textLabel->SetFocus();

    switch( m_CurrentText->Type() )
    {
    case SCH_GLOBAL_LABEL_T:
        SetTitle( _( "Global Label Properties" ) );
        break;

    case SCH_HIERARCHICAL_LABEL_T:
        SetTitle( _( "Hierarchical Label Properties" ) );
        break;

    case SCH_LABEL_T:
        SetTitle( _( "Label Properties" ) );
        break;

    case SCH_SHEET_PIN_T:
        SetTitle( _( "Hierarchical Sheet Pin Properties." ) );
        break;

    default:
        SetTitle( _( "Text Properties" ) );
        m_textLabel->Disconnect( wxEVT_COMMAND_TEXT_ENTER,
                                 wxCommandEventHandler ( DIALOG_LABEL_EDITOR::OnEnterKey ),
                                 NULL, this );
        break;
    }

    int MINTEXTWIDTH = 40;    // M's are big characters, a few establish a lot of width

    int max_len = 0;

    if ( !multiLine )
    {
        max_len =m_CurrentText->m_Text.Length();
    }
    else
    {
        // calculate the length of the biggest line
        // we cannot use the length of the entire text that has no meaning
        int curr_len = MINTEXTWIDTH;
        int imax = m_CurrentText->m_Text.Len();

        for( int count = 0; count < imax; count++ )
        {
            if( m_CurrentText->m_Text[count] == '\n' ||
                m_CurrentText->m_Text[count] == '\r' ) // new line
            {
                curr_len = 0;
            }
            else
            {
                curr_len++;

                if ( max_len < curr_len )
                    max_len = curr_len;
            }
        }
    }

    if( max_len < MINTEXTWIDTH )
        max_len = MINTEXTWIDTH;

    wxString textWidth;
    textWidth.Append( 'M', MINTEXTWIDTH );
    EnsureTextCtrlWidth( m_textLabel, &textWidth );

    // Set validators
    m_TextOrient->SetSelection( m_CurrentText->GetOrientation() );
    m_TextShape->SetSelection( m_CurrentText->GetShape() );

    int style = 0;

    if( m_CurrentText->m_Italic )
        style = 1;

    if( m_CurrentText->m_Bold )
        style += 2;

    m_TextStyle->SetSelection( style );

    wxString units = ReturnUnitSymbol( g_UserUnit, wxT( "(%s)" ) );
    msg = _( "H" ) + units + _( " x W" ) + units;
    m_staticSizeUnits->SetLabel( msg );

    msg = ReturnStringFromValue( g_UserUnit, m_CurrentText->m_Size.x );
    m_TextSize->SetValue( msg );

    if( m_CurrentText->Type() != SCH_GLOBAL_LABEL_T
     && m_CurrentText->Type() != SCH_HIERARCHICAL_LABEL_T )
    {
        m_TextShape->Show( false );
    }

    m_sdbSizer1OK->SetDefault();
}
Exemplo n.º 5
0
void NumValidatorTestCase::Interactive()
{
    // FIXME: This test fails on MSW buildbot slaves although works fine on
    //        development machine, no idea why. It seems to be a problem with
    //        wxUIActionSimulator rather the wxListCtrl control itself however.
    if ( wxGetUserId().Lower().Matches("buildslave*") )
        return;

    // Set a locale using comma as thousands separator character.
    wxLocale loc(wxLANGUAGE_ENGLISH_UK, wxLOCALE_DONT_LOAD_DEFAULT);

    m_text->SetValidator(
        wxIntegerValidator<unsigned>(NULL, wxNUM_VAL_THOUSANDS_SEPARATOR));

    // Create a sibling text control to be able to switch focus and thus
    // trigger the control validation/normalization.
    wxTextCtrl * const text2 = new wxTextCtrl(m_text->GetParent(), wxID_ANY);
    text2->Move(10, 80); // Just to see it better while debugging...
    wxFloatingPointValidator<float> valFloat(3);
    valFloat.SetRange(-10., 10.);
    text2->SetValidator(valFloat);

    wxUIActionSimulator sim;

    // Entering '-' in a control with positive range is not allowed.
    m_text->SetFocus();
    sim.Char('-');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "", m_text->GetValue() );

    // Neither is entering '.' or any non-digit character.
    sim.Text(".a+/");
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "", m_text->GetValue() );

    // Entering digits should work though and after leaving the control the
    // contents should be normalized.
    sim.Text("1234567");
    wxYield();
    text2->SetFocus();
    wxYield();
    if ( loc.IsOk() )
        CPPUNIT_ASSERT_EQUAL( "1,234,567", m_text->GetValue() );
    else
        CPPUNIT_ASSERT_EQUAL( "1234567", m_text->GetValue() );


    // Entering both '-' and '.' in this control should work but only in the
    // correct order.
    sim.Char('-');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-", text2->GetValue() );

    text2->SetInsertionPoint(0);
    sim.Char('.');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-", text2->GetValue() );

    text2->SetInsertionPointEnd();
    sim.Char('.');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-.", text2->GetValue() );

    // Adding up to three digits after the point should work.
    sim.Text("987");
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-.987", text2->GetValue() );

    // But no more.
    sim.Text("654");
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-.987", text2->GetValue() );

    // We can remove one digit and another one though.
    sim.Char(WXK_BACK);
    sim.Char(WXK_BACK);
    sim.Char('6');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "-.96", text2->GetValue() );


    // Also test the range constraint.
    text2->Clear();

    sim.Char('9');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "9", text2->GetValue() );

    sim.Char('9');
    wxYield();
    CPPUNIT_ASSERT_EQUAL( "9", text2->GetValue() );
}