Exemplo n.º 1
0
Base::Vector3d ProfileBased::getProfileNormal() const {

    Base::Vector3d SketchVector(0,0,1);
    auto obj = getVerifiedObject(true);
    if(!obj) 
        return SketchVector;

    // get the Sketch plane
    if(obj->isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
        Base::Placement SketchPos = obj->Placement.getValue();
        Base::Rotation SketchOrientation = SketchPos.getRotation();    
        SketchOrientation.multVec(SketchVector,SketchVector);
    }
    else {
        TopoDS_Shape shape = getVerifiedFace(true);
        if (shape == TopoDS_Shape())
            return SketchVector;

        if (shape.ShapeType() == TopAbs_FACE) {
            BRepAdaptor_Surface adapt(TopoDS::Face(shape));
            double u = adapt.FirstUParameter() + (adapt.LastUParameter() - adapt.FirstUParameter())/2.;
            double v = adapt.FirstVParameter() + (adapt.LastVParameter() - adapt.FirstVParameter())/2.;
            BRepLProp_SLProps prop(adapt,u,v,2,Precision::Confusion());
            if(prop.IsNormalDefined()) {
                gp_Pnt pnt; gp_Vec vec;
                // handles the orientation state of the shape
                BRepGProp_Face(TopoDS::Face(shape)).Normal(u,v,pnt,vec);
                SketchVector = Base::Vector3d(vec.X(), vec.Y(), vec.Z());
            }
        }
    }
    
    return SketchVector;
}
Exemplo n.º 2
0
double ProfileBased::getReversedAngle(const Base::Vector3d &b, const Base::Vector3d &v)
{
    try {
        Part::Feature* obj = getVerifiedObject();
        TopoDS_Shape sketchshape = getVerifiedFace();

        // get centre of gravity of the sketch face
        GProp_GProps props;
        BRepGProp::SurfaceProperties(sketchshape, props);
        gp_Pnt cog = props.CentreOfMass();
        Base::Vector3d p_cog(cog.X(), cog.Y(), cog.Z());
        // get direction to cog from its projection on the revolve axis
        Base::Vector3d perp_dir = p_cog - p_cog.Perpendicular(b, v);
        // get cross product of projection direction with revolve axis direction
        Base::Vector3d cross = v % perp_dir;
        // get sketch vector pointing away from support material
        Base::Placement SketchPos = obj->Placement.getValue();
        Base::Rotation SketchOrientation = SketchPos.getRotation();
        Base::Vector3d SketchNormal(0,0,1);
        SketchOrientation.multVec(SketchNormal,SketchNormal);

        return SketchNormal * cross;
    }
    catch (...) {
        return Reversed.getValue() ? 1 : 0;
    }
}
Exemplo n.º 3
0
gp_Pln Feature::makePlnFromPlane(const App::DocumentObject* obj)
{
    const App::GeoFeature* plane = static_cast<const App::GeoFeature*>(obj);
    if (plane == NULL)
        throw Base::Exception("Feature: Null object");

    Base::Vector3d pos = plane->Placement.getValue().getPosition();
    Base::Rotation rot = plane->Placement.getValue().getRotation();
    Base::Vector3d normal(0,0,1);
    rot.multVec(normal, normal);
    return gp_Pln(gp_Pnt(pos.x,pos.y,pos.z), gp_Dir(normal.x,normal.y,normal.z));
}
bool Revolution::suggestReversed(void)
{
    try {
        updateAxis();

        Part::Part2DObject* sketch = getVerifiedSketch();
        std::vector<TopoDS_Wire> wires = getSketchWires();
        TopoDS_Shape sketchshape = makeFace(wires);

        Base::Vector3d b = Base.getValue();
        Base::Vector3d v = Axis.getValue();

        // get centre of gravity of the sketch face
        GProp_GProps props;
        BRepGProp::SurfaceProperties(sketchshape, props);
        gp_Pnt cog = props.CentreOfMass();
        Base::Vector3d p_cog(cog.X(), cog.Y(), cog.Z());
        // get direction to cog from its projection on the revolve axis
        Base::Vector3d perp_dir = p_cog - p_cog.Perpendicular(b, v);
        // get cross product of projection direction with revolve axis direction
        Base::Vector3d cross = v % perp_dir;
        // get sketch vector pointing away from support material
        Base::Placement SketchPos = sketch->Placement.getValue();
        Base::Rotation SketchOrientation = SketchPos.getRotation();
        Base::Vector3d SketchNormal(0,0,1);
        SketchOrientation.multVec(SketchNormal,SketchNormal);
        // simply convert double to float
        Base::Vector3d norm(SketchNormal.x, SketchNormal.y, SketchNormal.z);

        // return true if the angle between norm and cross is obtuse
        return norm * cross < 0.f;
    }
    catch (...) {
        return Reversed.getValue();
    }
}
Exemplo n.º 5
0
void ProfileBased::getAxis(const App::DocumentObject *pcReferenceAxis, const std::vector<std::string> &subReferenceAxis,
                          Base::Vector3d& base, Base::Vector3d& dir)
{
    dir = Base::Vector3d(0,0,0); // If unchanged signals that no valid axis was found
    if (pcReferenceAxis == NULL)
        return;

    App::DocumentObject* profile = Profile.getValue();
    gp_Pln sketchplane;

    if (profile->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
        Part::Part2DObject* sketch = getVerifiedSketch();
        Base::Placement SketchPlm = sketch->Placement.getValue();
        Base::Vector3d SketchVector = Base::Vector3d(0, 0, 1);
        Base::Rotation SketchOrientation = SketchPlm.getRotation();
        SketchOrientation.multVec(SketchVector, SketchVector);
        Base::Vector3d SketchPos = SketchPlm.getPosition();
        sketchplane = gp_Pln(gp_Pnt(SketchPos.x, SketchPos.y, SketchPos.z), gp_Dir(SketchVector.x, SketchVector.y, SketchVector.z));

        if (pcReferenceAxis == profile) {
            bool hasValidAxis = false;
            Base::Axis axis;
            if (subReferenceAxis[0] == "V_Axis") {
                hasValidAxis = true;
                axis = sketch->getAxis(Part::Part2DObject::V_Axis);
            }
            else if (subReferenceAxis[0] == "H_Axis") {
                hasValidAxis = true;
                axis = sketch->getAxis(Part::Part2DObject::H_Axis);
            }
            else if (subReferenceAxis[0].size() > 4 && subReferenceAxis[0].substr(0, 4) == "Axis") {
                int AxId = std::atoi(subReferenceAxis[0].substr(4, 4000).c_str());
                if (AxId >= 0 && AxId < sketch->getAxisCount()) {
                    hasValidAxis = true;
                    axis = sketch->getAxis(AxId);
                }
            }
            if (hasValidAxis) {
                axis *= SketchPlm;
                base = axis.getBase();
                dir = axis.getDirection();
                return;
            } //else - an edge of the sketch was selected as an axis
        }

    }
    else if (profile->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
        Base::Placement SketchPlm = getVerifiedObject()->Placement.getValue();
        Base::Vector3d SketchVector = getProfileNormal();
        Base::Vector3d SketchPos = SketchPlm.getPosition();
        sketchplane = gp_Pln(gp_Pnt(SketchPos.x, SketchPos.y, SketchPos.z), gp_Dir(SketchVector.x, SketchVector.y, SketchVector.z));
    }

    // get reference axis
    if (pcReferenceAxis->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
        const PartDesign::Line* line = static_cast<const PartDesign::Line*>(pcReferenceAxis);
        base = line->getBasePoint();
        dir = line->getDirection();

        // Check that axis is perpendicular with sketch plane!
        if (sketchplane.Axis().Direction().IsParallel(gp_Dir(dir.x, dir.y, dir.z), Precision::Angular()))
            throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
        return;
    }

    if (pcReferenceAxis->getTypeId().isDerivedFrom(App::Line::getClassTypeId())) {
        const App::Line* line = static_cast<const App::Line*>(pcReferenceAxis);
        base = Base::Vector3d(0,0,0);
        line->Placement.getValue().multVec(Base::Vector3d (1,0,0), dir);

        // Check that axis is perpendicular with sketch plane!
        if (sketchplane.Axis().Direction().IsParallel(gp_Dir(dir.x, dir.y, dir.z), Precision::Angular()))
            throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
        return;
    }

    if (pcReferenceAxis->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
        if (subReferenceAxis.empty())
            throw Base::ValueError("No rotation axis reference specified");
        const Part::Feature* refFeature = static_cast<const Part::Feature*>(pcReferenceAxis);
        Part::TopoShape refShape = refFeature->Shape.getShape();
        TopoDS_Shape ref = refShape.getSubShape(subReferenceAxis[0].c_str());

        if (ref.ShapeType() == TopAbs_EDGE) {
            TopoDS_Edge refEdge = TopoDS::Edge(ref);
            if (refEdge.IsNull())
                throw Base::ValueError("Failed to extract rotation edge");
            BRepAdaptor_Curve adapt(refEdge);
            if (adapt.GetType() != GeomAbs_Line)
                throw Base::TypeError("Rotation edge must be a straight line");

            gp_Pnt b = adapt.Line().Location();
            base = Base::Vector3d(b.X(), b.Y(), b.Z());
            gp_Dir d = adapt.Line().Direction();
            dir = Base::Vector3d(d.X(), d.Y(), d.Z());
            // Check that axis is co-planar with sketch plane!
            // Check that axis is perpendicular with sketch plane!
            if (sketchplane.Axis().Direction().IsParallel(d, Precision::Angular()))
                throw Base::ValueError("Rotation axis must not be perpendicular with the sketch plane");
            return;
        } else {
            throw Base::TypeError("Rotation reference must be an edge");
        }
    }

    throw Base::TypeError("Rotation axis reference is invalid");
}
Exemplo n.º 6
0
App::DocumentObjectExecReturn *Pad::execute(void)
{
    // Validate parameters
    double L = Length.getValue();
    if ((std::string(Type.getValueAsString()) == "Length") && (L < Precision::Confusion()))
        return new App::DocumentObjectExecReturn("Length of pad too small");
    double L2 = Length2.getValue();
    if ((std::string(Type.getValueAsString()) == "TwoLengths") && (L < Precision::Confusion()))
        return new App::DocumentObjectExecReturn("Second length of pad too small");

    Part::Part2DObject* sketch = 0;
    std::vector<TopoDS_Wire> wires;
    try {
        sketch = getVerifiedSketch();
        wires = getSketchWires();
    } catch (const Base::Exception& e) {
        return new App::DocumentObjectExecReturn(e.what());
    }

    TopoDS_Shape support;
    try {
        support = getSupportShape();
    } catch (const Base::Exception&) {
        // ignore, because support isn't mandatory
        support = TopoDS_Shape();
    }

    // get the Sketch plane
    Base::Placement SketchPos = sketch->Placement.getValue();
    Base::Rotation SketchOrientation = SketchPos.getRotation();
    Base::Vector3d SketchVector(0,0,1);
    SketchOrientation.multVec(SketchVector,SketchVector);

    this->positionBySketch();
    TopLoc_Location invObjLoc = this->getLocation().Inverted();

    try {
        support.Move(invObjLoc);

        gp_Dir dir(SketchVector.x,SketchVector.y,SketchVector.z);
        dir.Transform(invObjLoc.Transformation());

        TopoDS_Shape sketchshape = makeFace(wires);
        if (sketchshape.IsNull())
            return new App::DocumentObjectExecReturn("Pad: Creating a face from sketch failed");
        sketchshape.Move(invObjLoc);

        TopoDS_Shape prism;
        std::string method(Type.getValueAsString());
        if (method == "UpToFirst" || method == "UpToLast" || method == "UpToFace") {
            TopoDS_Face supportface = getSupportFace();
            supportface.Move(invObjLoc);

            if (Reversed.getValue())
                dir.Reverse();

            // Find a valid face to extrude up to
            TopoDS_Face upToFace;
            if (method == "UpToFace") {
                getUpToFaceFromLinkSub(upToFace, UpToFace);
                upToFace.Move(invObjLoc);
            }
            getUpToFace(upToFace, support, supportface, sketchshape, method, dir);

            // A support object is always required and we need to use BRepFeat_MakePrism
            // Problem: For Pocket/UpToFirst (or an equivalent Pocket/UpToFace) the resulting shape is invalid
            // because the feature does not add any material. This only happens with the "2" option, though
            // Note: It might be possible to pass a shell or a compound containing multiple faces
            // as the Until parameter of Perform()
            BRepFeat_MakePrism PrismMaker;
            PrismMaker.Init(support, sketchshape, supportface, dir, 2, 1);
            PrismMaker.Perform(upToFace);

            if (!PrismMaker.IsDone())
                return new App::DocumentObjectExecReturn("Pad: Up to face: Could not extrude the sketch!");
            prism = PrismMaker.Shape();
        } else {
            generatePrism(prism, sketchshape, method, dir, L, L2,
                          Midplane.getValue(), Reversed.getValue());
        }

        if (prism.IsNull())
            return new App::DocumentObjectExecReturn("Pad: Resulting shape is empty");

        // set the additive shape property for later usage in e.g. pattern
        this->AddShape.setValue(prism);

        // if the sketch has a support fuse them to get one result object
        if (!support.IsNull()) {
            // Let's call algorithm computing a fuse operation:
            BRepAlgoAPI_Fuse mkFuse(support, prism);
            // Let's check if the fusion has been successful
            if (!mkFuse.IsDone())
                return new App::DocumentObjectExecReturn("Pad: Fusion with support failed");
            TopoDS_Shape result = mkFuse.Shape();
            // we have to get the solids (fuse sometimes creates compounds)
            TopoDS_Shape solRes = this->getSolid(result);
            // lets check if the result is a solid
            if (solRes.IsNull())
                return new App::DocumentObjectExecReturn("Pad: Resulting shape is not a solid");
            this->Shape.setValue(solRes);
        } else {
            this->Shape.setValue(prism);
        }

        return App::DocumentObject::StdReturn;
    }
    catch (Standard_Failure) {
        Handle_Standard_Failure e = Standard_Failure::Caught();
        if (std::string(e->GetMessageString()) == "TopoDS::Face")
            return new App::DocumentObjectExecReturn("Could not create face from sketch.\n"
                "Intersecting sketch entities or multiple faces in a sketch are not allowed.");
        else
            return new App::DocumentObjectExecReturn(e->GetMessageString());
    }
    catch (Base::Exception& e) {
        return new App::DocumentObjectExecReturn(e.what());
    }
}
Exemplo n.º 7
0
App::DocumentObjectExecReturn *Pocket::execute(void)
{
    // Handle legacy features, these typically have Type set to 3 (previously NULL, now UpToFace),
    // empty FaceName (because it didn't exist) and a value for Length
    if (std::string(Type.getValueAsString()) == "UpToFace" &&
        (UpToFace.getValue() == NULL && Length.getValue() > Precision::Confusion()))
        Type.setValue("Length");

    // Validate parameters
    double L = Length.getValue();
    if ((std::string(Type.getValueAsString()) == "Length") && (L < Precision::Confusion()))
        return new App::DocumentObjectExecReturn("Pocket: Length of pocket too small");

    Part::Part2DObject* sketch = 0;
    std::vector<TopoDS_Wire> wires;
    TopoDS_Shape support;
    try {
        sketch = getVerifiedSketch();
        wires = getSketchWires();
        support = getSupportShape();
    } catch (const Base::Exception& e) {
        return new App::DocumentObjectExecReturn(e.what());
    }

    // get the Sketch plane
    Base::Placement SketchPos = sketch->Placement.getValue();
    Base::Rotation SketchOrientation = SketchPos.getRotation();
    Base::Vector3d SketchVector(0,0,1);
    SketchOrientation.multVec(SketchVector,SketchVector);

    // turn around for pockets
    SketchVector *= -1;

    this->positionBySketch();
    TopLoc_Location invObjLoc = this->getLocation().Inverted();

    try {
        support.Move(invObjLoc);

        gp_Dir dir(SketchVector.x,SketchVector.y,SketchVector.z);
        dir.Transform(invObjLoc.Transformation());

        TopoDS_Shape sketchshape = makeFace(wires);
        if (sketchshape.IsNull())
            return new App::DocumentObjectExecReturn("Pocket: Creating a face from sketch failed");
        sketchshape.Move(invObjLoc);

        std::string method(Type.getValueAsString());
        if (method == "UpToFirst" || method == "UpToFace") {
            TopoDS_Face supportface = getSupportFace();
            supportface.Move(invObjLoc);

            // Find a valid face to extrude up to
            TopoDS_Face upToFace;
            if (method == "UpToFace") {
                getUpToFaceFromLinkSub(upToFace, UpToFace);
                upToFace.Move(invObjLoc);
            }
            getUpToFace(upToFace, support, supportface, sketchshape, method, dir);

            // Special treatment because often the created stand-alone prism is invalid (empty) because
            // BRepFeat_MakePrism(..., 2, 1) is buggy
            BRepFeat_MakePrism PrismMaker;
            PrismMaker.Init(support, sketchshape, supportface, dir, 0, 1);
            PrismMaker.Perform(upToFace);

            if (!PrismMaker.IsDone())
                return new App::DocumentObjectExecReturn("Pocket: Up to face: Could not extrude the sketch!");
            TopoDS_Shape prism = PrismMaker.Shape();
            prism = refineShapeIfActive(prism);

            // And the really expensive way to get the SubShape...
            BRepAlgoAPI_Cut mkCut(support, prism);
            if (!mkCut.IsDone())
                return new App::DocumentObjectExecReturn("Pocket: Up to face: Could not get SubShape!");
            // FIXME: In some cases this affects the Shape property: It is set to the same shape as the SubShape!!!!
            TopoDS_Shape result = refineShapeIfActive(mkCut.Shape());
            this->SubShape.setValue(result);
            this->Shape.setValue(prism);
        } else {
            TopoDS_Shape prism;
            generatePrism(prism, sketchshape, method, dir, L, 0.0,
                          Midplane.getValue(), Reversed.getValue());
            if (prism.IsNull())
                return new App::DocumentObjectExecReturn("Pocket: Resulting shape is empty");

            // set the subtractive shape property for later usage in e.g. pattern
            prism = refineShapeIfActive(prism);
            this->SubShape.setValue(prism);

            // Cut the SubShape out of the support
            BRepAlgoAPI_Cut mkCut(support, prism);
            if (!mkCut.IsDone())
                return new App::DocumentObjectExecReturn("Pocket: Cut out of support failed");
            TopoDS_Shape result = mkCut.Shape();
            // we have to get the solids (fuse sometimes creates compounds)
            TopoDS_Shape solRes = this->getSolid(result);
            if (solRes.IsNull())
                return new App::DocumentObjectExecReturn("Pocket: Resulting shape is not a solid");
            solRes = refineShapeIfActive(solRes);
            remapSupportShape(solRes);
            this->Shape.setValue(solRes);
        }

        return App::DocumentObject::StdReturn;
    }
    catch (Standard_Failure) {
        Handle_Standard_Failure e = Standard_Failure::Caught();
        if (std::string(e->GetMessageString()) == "TopoDS::Face" &&
            (std::string(Type.getValueAsString()) == "UpToFirst" || std::string(Type.getValueAsString()) == "UpToFace"))
            return new App::DocumentObjectExecReturn("Could not create face from sketch.\n"
                "Intersecting sketch entities or multiple faces in a sketch are not allowed "
                "for making a pocket up to a face.");
        else
            return new App::DocumentObjectExecReturn(e->GetMessageString());
    }
    catch (Base::Exception& e) {
        return new App::DocumentObjectExecReturn(e.what());
    }
}
Exemplo n.º 8
0
const std::list<gp_Trsf> LinearPattern::getTransformations(const std::vector<App::DocumentObject*>)
{
    double distance = Length.getValue();
    if (distance < Precision::Confusion())
        throw Base::Exception("Pattern length too small");
    int occurrences = Occurrences.getValue();
    if (occurrences < 2)
        throw Base::Exception("At least two occurrences required");
    bool reversed = Reversed.getValue();

    double offset = distance / (occurrences - 1);

    App::DocumentObject* refObject = Direction.getValue();
    if (refObject == NULL)
        throw Base::Exception("No direction reference specified");

    std::vector<std::string> subStrings = Direction.getSubValues();
    if (subStrings.empty())
        throw Base::Exception("No direction reference specified");

    gp_Dir dir;
    if (refObject->getTypeId().isDerivedFrom(Part::Part2DObject::getClassTypeId())) {
        Part::Part2DObject* refSketch = static_cast<Part::Part2DObject*>(refObject);
        Base::Axis axis;
        if (subStrings[0] == "H_Axis")
            axis = refSketch->getAxis(Part::Part2DObject::H_Axis);
        else if (subStrings[0] == "V_Axis")
            axis = refSketch->getAxis(Part::Part2DObject::V_Axis);
        else if (subStrings[0] == "N_Axis")
            axis = refSketch->getAxis(Part::Part2DObject::N_Axis);
        else if (subStrings[0].size() > 4 && subStrings[0].substr(0,4) == "Axis") {
            int AxId = std::atoi(subStrings[0].substr(4,4000).c_str());
            if (AxId >= 0 && AxId < refSketch->getAxisCount())
                axis = refSketch->getAxis(AxId);
        }
        axis *= refSketch->Placement.getValue();
        dir = gp_Dir(axis.getDirection().x, axis.getDirection().y, axis.getDirection().z);
    } else if (refObject->getTypeId().isDerivedFrom(PartDesign::Plane::getClassTypeId())) {
        PartDesign::Plane* plane = static_cast<PartDesign::Plane*>(refObject);
        Base::Vector3d d = plane->getNormal();
        dir = gp_Dir(d.x, d.y, d.z);
    } else if (refObject->getTypeId().isDerivedFrom(PartDesign::Line::getClassTypeId())) {
        PartDesign::Line* line = static_cast<PartDesign::Line*>(refObject);
        Base::Vector3d d = line->getDirection();
        dir = gp_Dir(d.x, d.y, d.z);
    } else if (refObject->getTypeId().isDerivedFrom(App::Line::getClassTypeId())) {
        App::Line* line = static_cast<App::Line*>(refObject);
        Base::Rotation rot = line->Placement.getValue().getRotation();
        Base::Vector3d d(1,0,0);
        rot.multVec(d, d);
        dir = gp_Dir(d.x, d.y, d.z);
    } else if (refObject->getTypeId().isDerivedFrom(Part::Feature::getClassTypeId())) {
        if (subStrings[0].empty())
            throw Base::Exception("No direction reference specified");
        Part::Feature* refFeature = static_cast<Part::Feature*>(refObject);
        Part::TopoShape refShape = refFeature->Shape.getShape();
        TopoDS_Shape ref = refShape.getSubShape(subStrings[0].c_str());

        if (ref.ShapeType() == TopAbs_FACE) {
            TopoDS_Face refFace = TopoDS::Face(ref);
            if (refFace.IsNull())
                throw Base::Exception("Failed to extract direction plane");
            BRepAdaptor_Surface adapt(refFace);
            if (adapt.GetType() != GeomAbs_Plane)
                throw Base::Exception("Direction face must be planar");

            dir = adapt.Plane().Axis().Direction();
        } else if (ref.ShapeType() == TopAbs_EDGE) {
            TopoDS_Edge refEdge = TopoDS::Edge(ref);
            if (refEdge.IsNull())
                throw Base::Exception("Failed to extract direction edge");
            BRepAdaptor_Curve adapt(refEdge);
            if (adapt.GetType() != GeomAbs_Line)
                throw Base::Exception("Direction edge must be a straight line");

            dir = adapt.Line().Direction();
        } else {
            throw Base::Exception("Direction reference must be edge or face");
        }
    } else {
        throw Base::Exception("Direction reference must be edge/face of a feature or a datum line/plane");
    }
    TopLoc_Location invObjLoc = this->getLocation().Inverted();
    dir.Transform(invObjLoc.Transformation());

    gp_Vec direction(dir.X(), dir.Y(), dir.Z());

    if (reversed)
        direction.Reverse();

    // Note: The original feature is NOT included in the list of transformations! Therefore
    // we start with occurrence number 1, not number 0
    std::list<gp_Trsf> transformations;
    gp_Trsf trans;
    transformations.push_back(trans); // identity transformation

    for (int i = 1; i < occurrences; i++) {
        trans.SetTranslation(direction * i * offset);
        transformations.push_back(trans);
    }

    return transformations;
}