Exemplo n.º 1
0
/* Analyze a single interpretation a block at a time */
static void
analyze_interp(SgAsmInterpretation *interp)
{
    /* Get the set of all instructions except instructions that are part of left-over blocks. */
    struct AllInstructions: public SgSimpleProcessing, public std::map<rose_addr_t, SgAsmX86Instruction*> {
        void visit(SgNode *node) {
            SgAsmX86Instruction *insn = isSgAsmX86Instruction(node);
            SgAsmFunction *func = SageInterface::getEnclosingNode<SgAsmFunction>(insn);
            if (func && 0==(func->get_reason() & SgAsmFunction::FUNC_LEFTOVERS))
                insert(std::make_pair(insn->get_address(), insn));
        }
    } insns;
    insns.traverse(interp, postorder);

    while (!insns.empty()) {
        std::cout <<"=====================================================================================\n"
                  <<"=== Starting a new basic block                                                    ===\n"
                  <<"=====================================================================================\n";
        AllInstructions::iterator si = insns.begin();
        SgAsmX86Instruction *insn = si->second;
        insns.erase(si);

        BaseSemantics::RiscOperatorsPtr operators = make_ops();
        BaseSemantics::Formatter formatter;
        formatter.set_suppress_initial_values();
        formatter.set_show_latest_writers(do_usedef);
        BaseSemantics::DispatcherPtr dispatcher;
        if (do_trace) {
            // Enable RiscOperators tracing, but turn off a bunch of info that makes comparisons with a known good answer
            // difficult.
            Sawyer::Message::PrefixPtr prefix = Sawyer::Message::Prefix::instance();
            prefix->showProgramName(false);
            prefix->showThreadId(false);
            prefix->showElapsedTime(false);
            prefix->showFacilityName(Sawyer::Message::Prefix::NEVER);
            prefix->showImportance(false);
            Sawyer::Message::UnformattedSinkPtr sink = Sawyer::Message::StreamSink::instance(std::cout);
            sink->prefix(prefix);
            sink->defaultPropertiesNS().useColor = false;
            TraceSemantics::RiscOperatorsPtr trace = TraceSemantics::RiscOperators::instance(operators);
            trace->stream().destination(sink);
            trace->stream().enable();
            dispatcher = DispatcherX86::instance(trace, 32);
        } else {
            dispatcher = DispatcherX86::instance(operators, 32);
        }
        operators->set_solver(make_solver());

        // The fpstatus_top register must have a concrete value if we'll use the x86 floating-point stack (e.g., st(0))
        if (const RegisterDescriptor *REG_FPSTATUS_TOP = regdict->lookup("fpstatus_top")) {
            BaseSemantics::SValuePtr st_top = operators->number_(REG_FPSTATUS_TOP->get_nbits(), 0);
            operators->writeRegister(*REG_FPSTATUS_TOP, st_top);
        }

#if SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN
        BaseSemantics::SValuePtr orig_esp;
        if (do_test_subst) {
            // Only request the orig_esp if we're going to use it later because it causes an esp value to be instantiated
            // in the state, which is printed in the output, and thus changes the answer.
            BaseSemantics::RegisterStateGeneric::promote(operators->get_state()->get_register_state())->initialize_large();
            orig_esp = operators->readRegister(*regdict->lookup("esp"));
            std::cout <<"Original state:\n" <<*operators;
        }
#endif

        /* Perform semantic analysis for each instruction in this block. The block ends when we no longer know the value of
         * the instruction pointer or the instruction pointer refers to an instruction that doesn't exist or which has already
         * been processed. */
        while (1) {
            /* Analyze current instruction */
            std::cout <<"\n" <<unparseInstructionWithAddress(insn) <<"\n";
            try {
                dispatcher->processInstruction(insn);
#   if 0 /*DEBUGGING [Robb P. Matzke 2013-05-01]*/
                show_state(operators); // for comparing RegisterStateGeneric with the old RegisterStateX86 output
#   else
                std::cout <<(*operators + formatter);
#   endif
            } catch (const BaseSemantics::Exception &e) {
                std::cout <<e <<"\n";
            }

            /* Never follow CALL instructions */
            if (insn->get_kind()==x86_call || insn->get_kind()==x86_farcall)
                break;

            /* Get next instruction of this block */
            BaseSemantics::SValuePtr ip = operators->readRegister(dispatcher->findRegister("eip"));
            if (!ip->is_number())
                break;
            rose_addr_t next_addr = ip->get_number();
            si = insns.find(next_addr);
            if (si==insns.end()) break;
            insn = si->second;
            insns.erase(si);
        }

        // Test substitution on the symbolic state.
#if SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN
        if (do_test_subst) {
            SymbolicSemantics::SValuePtr from = SymbolicSemantics::SValue::promote(orig_esp);
            BaseSemantics::SValuePtr newvar = operators->undefined_(32);
            newvar->set_comment("frame_pointer");
            SymbolicSemantics::SValuePtr to =
                SymbolicSemantics::SValue::promote(operators->add(newvar, operators->number_(32, 4)));
            std::cout <<"Substituting from " <<*from <<" to " <<*to <<"\n";
            SymbolicSemantics::RiscOperators::promote(operators)->substitute(from, to);
            std::cout <<"Substituted state:\n" <<(*operators+formatter);
        }
#endif
    }
}
Exemplo n.º 2
0
// see base class
bool
SgAsmX86Instruction::isFunctionCallSlow(const std::vector<SgAsmInstruction*>& insns, rose_addr_t *target, rose_addr_t *return_va)
{
    if (isFunctionCallFast(insns, target, return_va))
        return true;

    // The following stuff works only if we have a relatively complete AST.
    static const size_t EXECUTION_LIMIT = 10; // max size of basic blocks for expensive analyses
    if (insns.empty())
        return false;
    SgAsmX86Instruction *last = isSgAsmX86Instruction(insns.back());
    if (!last)
        return false;
    SgAsmFunction *func = SageInterface::getEnclosingNode<SgAsmFunction>(last);
    SgAsmInterpretation *interp = SageInterface::getEnclosingNode<SgAsmInterpretation>(func);

    // Slow method: Emulate the instructions and then look at the EIP and stack.  If the EIP points outside the current
    // function and the top of the stack holds an address of an instruction within the current function, then this must be a
    // function call.
    if (interp && insns.size()<=EXECUTION_LIMIT) {
        using namespace Rose::BinaryAnalysis;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2::SymbolicSemantics;
        const InstructionMap &imap = interp->get_instruction_map();
        const RegisterDictionary *regdict = RegisterDictionary::dictionary_for_isa(interp);
        SmtSolverPtr solver = SmtSolver::instance(Rose::CommandLine::genericSwitchArgs.smtSolver);
        BaseSemantics::RiscOperatorsPtr ops = RiscOperators::instance(regdict, solver);
        ASSERT_not_null(ops);
        const RegisterDescriptor SP = regdict->findLargestRegister(x86_regclass_gpr, x86_gpr_sp);
        DispatcherX86Ptr dispatcher = DispatcherX86::instance(ops, SP.get_nbits());
        SValuePtr orig_esp = SValue::promote(ops->readRegister(dispatcher->REG_anySP));
        try {
            for (size_t i=0; i<insns.size(); ++i)
                dispatcher->processInstruction(insns[i]);
        } catch (const BaseSemantics::Exception &e) {
            return false;
        }

        // If the next instruction address is concrete but does not point to a function entry point, then this is not a call.
        SValuePtr eip = SValue::promote(ops->readRegister(dispatcher->REG_anyIP));
        if (eip->is_number()) {
            rose_addr_t target_va = eip->get_number();
            SgAsmFunction *target_func = SageInterface::getEnclosingNode<SgAsmFunction>(imap.get_value_or(target_va, NULL));
            if (!target_func || target_va!=target_func->get_entry_va())
                return false;
        }

        // If nothing was pushed onto the stack, then this isn't a function call.
        const size_t spWidth = dispatcher->REG_anySP.get_nbits();
        SValuePtr esp = SValue::promote(ops->readRegister(dispatcher->REG_anySP));
        SValuePtr stack_delta = SValue::promote(ops->add(esp, ops->negate(orig_esp)));
        SValuePtr stack_delta_sign = SValue::promote(ops->extract(stack_delta, spWidth-1, spWidth));
        if (stack_delta_sign->is_number() && 0==stack_delta_sign->get_number())
            return false;

        // If the top of the stack does not contain a concrete value or the top of the stack does not point to an instruction
        // in this basic block's function, then this is not a function call.
        const size_t ipWidth = dispatcher->REG_anyIP.get_nbits();
        SValuePtr top = SValue::promote(ops->readMemory(dispatcher->REG_SS, esp, esp->undefined_(ipWidth), esp->boolean_(true)));
        if (top->is_number()) {
            rose_addr_t va = top->get_number();
            SgAsmFunction *return_func = SageInterface::getEnclosingNode<SgAsmFunction>(imap.get_value_or(va, NULL));
            if (!return_func || return_func!=func) {
                return false;
            }
        } else {
            return false;
        }

        // Since EIP might point to a function entry address and since the top of the stack contains a pointer to an
        // instruction in this function, we assume that this is a function call.
        if (target && eip->is_number())
            *target = eip->get_number();
        if (return_va && top->is_number())
            *return_va = top->get_number();
        return true;
    }

    // Similar to the above method, but works when all we have is the basic block (e.g., this case gets hit quite a bit from
    // the Partitioner).  Returns true if, after executing the basic block, the top of the stack contains the fall-through
    // address of the basic block. We depend on our caller to figure out if EIP is reasonably a function entry address.
    if (!interp && insns.size()<=EXECUTION_LIMIT) {
        using namespace Rose::BinaryAnalysis;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2::SymbolicSemantics;
        SmtSolverPtr solver = SmtSolver::instance(Rose::CommandLine::genericSwitchArgs.smtSolver);
        SgAsmX86Instruction *x86insn = isSgAsmX86Instruction(insns.front());
        ASSERT_not_null(x86insn);
#if 1 // [Robb P. Matzke 2015-03-03]: FIXME[Robb P. Matzke 2015-03-03]: not ready yet; x86-64 semantics still under construction
        if (x86insn->get_addressSize() != x86_insnsize_32)
            return false;
#endif
        const RegisterDictionary *regdict = registersForInstructionSize(x86insn->get_addressSize());
        const RegisterDescriptor SP = regdict->findLargestRegister(x86_regclass_gpr, x86_gpr_sp);
        BaseSemantics::RiscOperatorsPtr ops = RiscOperators::instance(regdict, solver);
        DispatcherX86Ptr dispatcher = DispatcherX86::instance(ops, SP.get_nbits());
        try {
            for (size_t i=0; i<insns.size(); ++i)
                dispatcher->processInstruction(insns[i]);
        } catch (const BaseSemantics::Exception &e) {
            return false;
        }

        // Look at the top of the stack
        const size_t ipWidth = dispatcher->REG_anyIP.get_nbits();
        SValuePtr top = SValue::promote(ops->readMemory(dispatcher->REG_SS, ops->readRegister(SP),
                                                        ops->protoval()->undefined_(ipWidth),
                                                        ops->protoval()->boolean_(true)));
        if (top->is_number() && top->get_number() == last->get_address()+last->get_size()) {
            if (target) {
                SValuePtr eip = SValue::promote(ops->readRegister(dispatcher->REG_anyIP));
                if (eip->is_number())
                    *target = eip->get_number();
            }
            if (return_va)
                *return_va = top->get_number();
            return true;
        }
    }

    return false;
}
Exemplo n.º 3
0
/* Analyze a single interpretation a block at a time */
static void
analyze_interp(SgAsmInterpretation *interp)
{
    /* Get the set of all instructions except instructions that are part of left-over blocks. */
    struct AllInstructions: public SgSimpleProcessing, public std::map<rose_addr_t, SgAsmx86Instruction*> {
        void visit(SgNode *node) {
            SgAsmx86Instruction *insn = isSgAsmx86Instruction(node);
            SgAsmFunction *func = SageInterface::getEnclosingNode<SgAsmFunction>(insn);
            if (func && 0==(func->get_reason() & SgAsmFunction::FUNC_LEFTOVERS))
                insert(std::make_pair(insn->get_address(), insn));
        }
    } insns;
    insns.traverse(interp, postorder);

    while (!insns.empty()) {
        std::cout <<"=====================================================================================\n"
                  <<"=== Starting a new basic block                                                    ===\n"
                  <<"=====================================================================================\n";
        AllInstructions::iterator si = insns.begin();
        SgAsmx86Instruction *insn = si->second;
        insns.erase(si);

#if SEMANTIC_API == NEW_API
        BaseSemantics::RiscOperatorsPtr operators = make_ops();
        BaseSemantics::Formatter formatter;
        formatter.set_suppress_initial_values();
        BaseSemantics::DispatcherPtr dispatcher;
        if (do_trace) {
            TraceSemantics::RiscOperatorsPtr trace = TraceSemantics::RiscOperators::instance(operators);
            trace->set_stream(stdout);
            dispatcher = DispatcherX86::instance(trace);
        } else {
            dispatcher = DispatcherX86::instance(operators);
        }
        operators->set_solver(make_solver());
#else   // OLD_API
        typedef X86InstructionSemantics<MyPolicy, MyValueType> MyDispatcher;
        MyPolicy operators;
        MyDispatcher dispatcher(operators);
#   if SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN
        operators.set_solver(make_solver());
        SymbolicSemantics::Formatter formatter;
        formatter.expr_formatter.do_rename = true;
        formatter.expr_formatter.add_renames = true;
#   elif SEMANTIC_DOMAIN != FINDCONST_DOMAIN && SEMANTIC_DOMAIN != FINDCONSTABI_DOMAIN
        BaseSemantics::Formatter formatter;
#   endif
#endif

#if SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN && SEMANTIC_API == NEW_API
        BaseSemantics::SValuePtr orig_esp;
        if (do_test_subst) {
            // Only request the orig_esp if we're going to use it later because it causes an esp value to be instantiated
            // in the state, which is printed in the output, and thus changes the answer.
            BaseSemantics::RegisterStateGeneric::promote(operators->get_state()->get_register_state())->initialize_large();
            orig_esp = operators->readRegister(*regdict->lookup("esp"));
            std::cout <<"Original state:\n" <<*operators;
        }
#endif

        /* Perform semantic analysis for each instruction in this block. The block ends when we no longer know the value of
         * the instruction pointer or the instruction pointer refers to an instruction that doesn't exist or which has already
         * been processed. */
        while (1) {
            /* Analyze current instruction */
            std::cout <<"\n" <<unparseInstructionWithAddress(insn) <<"\n";
#if SEMANTIC_API == NEW_API
            try {
                dispatcher->processInstruction(insn);
#   if 0 /*DEBUGGING [Robb P. Matzke 2013-05-01]*/
                show_state(operators); // for comparing RegisterStateGeneric with the old RegisterStateX86 output
#   else
                std::cout <<(*operators + formatter);
#   endif
            } catch (const BaseSemantics::Exception &e) {
                std::cout <<e <<"\n";
            }
#else       // OLD API
            try {
                dispatcher.processInstruction(insn);
#   if SEMANTIC_DOMAIN == FINDCONST_DOMAIN || SEMANTIC_DOMAIN == FINDCONSTABI_DOMAIN
                operators.print(std::cout);
#   else
                operators.print(std::cout, formatter);
#   endif
            } catch (const MyDispatcher::Exception &e) {
                std::cout <<e <<"\n";
                break;
#   if SEMANTIC_DOMAIN == PARTSYM_DOMAIN
            } catch (const MyPolicy::Exception &e) {
                std::cout <<e <<"\n";
                break;
#   endif
            } catch (const SMTSolver::Exception &e) {
                std::cout <<e <<" [ "<<unparseInstructionWithAddress(insn) <<"]\n";
                break;
            }
#endif

            /* Never follow CALL instructions */
            if (insn->get_kind()==x86_call || insn->get_kind()==x86_farcall)
                break;

            /* Get next instruction of this block */
#if SEMANTIC_API == NEW_API
            BaseSemantics::SValuePtr ip = operators->readRegister(dispatcher->findRegister("eip"));
            if (!ip->is_number())
                break;
            rose_addr_t next_addr = ip->get_number();
#else       // OLD_API
#   if SEMANTIC_DOMAIN == PARTSYM_DOMAIN || SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN
            MyValueType<32> ip = operators.get_ip();
            if (!ip.is_known()) break;
            rose_addr_t next_addr = ip.known_value();
#   elif SEMANTIC_DOMAIN == NULL_DOMAIN || SEMANTIC_DOMAIN == INTERVAL_DOMAIN
            MyValueType<32> ip = operators.readRegister<32>(dispatcher.REG_EIP);
            if (!ip.is_known()) break;
            rose_addr_t next_addr = ip.known_value();
#   elif SEMANTIC_DOMAIN == MULTI_DOMAIN
            PartialSymbolicSemantics::ValueType<32> ip = operators.readRegister<32>(dispatcher.REG_EIP)
                                                         .get_subvalue(MyMultiSemanticsClass::SP0());
            if (!ip.is_known()) break;
            rose_addr_t next_addr = ip.known_value();
#   else
            if (operators.newIp->get().name) break;
            rose_addr_t next_addr = operators.newIp->get().offset;
#   endif
#endif
            si = insns.find(next_addr);
            if (si==insns.end()) break;
            insn = si->second;
            insns.erase(si);
        }

        // Test substitution on the symbolic state.
#if SEMANTIC_DOMAIN == SYMBOLIC_DOMAIN && SEMANTIC_API == NEW_API
        if (do_test_subst) {
            SymbolicSemantics::SValuePtr from = SymbolicSemantics::SValue::promote(orig_esp);
            BaseSemantics::SValuePtr newvar = operators->undefined_(32);
            newvar->set_comment("frame_pointer");
            SymbolicSemantics::SValuePtr to =
                SymbolicSemantics::SValue::promote(operators->add(newvar, operators->number_(32, 4)));
            std::cout <<"Substituting from " <<*from <<" to " <<*to <<"\n";
            SymbolicSemantics::RiscOperators::promote(operators)->substitute(from, to);
            std::cout <<"Substituted state:\n" <<(*operators+formatter);
        }
#endif
    }
}
Exemplo n.º 4
0
// see base class; don't modify target_va or return_va if they are not known
bool
SgAsmM68kInstruction::isFunctionCallSlow(const std::vector<SgAsmInstruction*>& insns, rose_addr_t *target_va,
                                         rose_addr_t *return_va)
{
    if (isFunctionCallFast(insns, target_va, return_va))
        return true;

    static const size_t EXECUTION_LIMIT = 25; // max size of basic blocks for expensive analyses
    if (insns.empty())
        return false;
    SgAsmM68kInstruction *last = isSgAsmM68kInstruction(insns.back());
    if (!last)
        return false;
    SgAsmFunction *func = SageInterface::getEnclosingNode<SgAsmFunction>(last);
    SgAsmInterpretation *interp = SageInterface::getEnclosingNode<SgAsmInterpretation>(func);

    // Slow method: Emulate the instructions and then look at the program counter (PC) and stack (A7).  If the PC points
    // outside the current function and the top of the stack holds an address of an instruction within the current function,
    // then this must be a function call.
    if (interp && insns.size()<=EXECUTION_LIMIT) {
        using namespace Rose::BinaryAnalysis;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2::SymbolicSemantics;
        const InstructionMap &imap = interp->get_instruction_map();
        const RegisterDictionary *regdict = RegisterDictionary::dictionary_for_isa(interp);
        SmtSolverPtr solver = SmtSolver::instance(Rose::CommandLine::genericSwitchArgs.smtSolver);
        BaseSemantics::RiscOperatorsPtr ops = RiscOperators::instance(regdict, solver);
        DispatcherM68kPtr dispatcher = DispatcherM68k::instance(ops, 32);
        SValuePtr orig_sp = SValue::promote(ops->readRegister(dispatcher->REG_A[7]));
        try {
            for (size_t i=0; i<insns.size(); ++i)
                dispatcher->processInstruction(insns[i]);
        } catch (const BaseSemantics::Exception &e) {
            return false;
        }

        // If the next instruction address is concrete but does not point to a function entry point, then this is not a call.
        SValuePtr ip = SValue::promote(ops->readRegister(dispatcher->REG_PC));
        if (ip->is_number()) {
            rose_addr_t target_va = ip->get_number();
            SgAsmFunction *target_func = SageInterface::getEnclosingNode<SgAsmFunction>(imap.get_value_or(target_va, NULL));
            if (!target_func || target_va!=target_func->get_entry_va())
                return false;
        }

        // If nothing was pushed onto the stack, then this isn't a function call.
        SValuePtr sp = SValue::promote(ops->readRegister(dispatcher->REG_A[7]));
        SValuePtr stack_delta = SValue::promote(ops->add(sp, ops->negate(orig_sp)));
        SValuePtr stack_delta_sign = SValue::promote(ops->extract(stack_delta, 31, 32));
        if (stack_delta_sign->is_number() && 0==stack_delta_sign->get_number())
            return false;

        // If the top of the stack does not contain a concrete value or the top of the stack does not point to an instruction
        // in this basic block's function, then this is not a function call.
        SValuePtr top = SValue::promote(ops->readMemory(RegisterDescriptor(), sp, sp->undefined_(32), sp->boolean_(true)));
        if (top->is_number()) {
            rose_addr_t va = top->get_number();
            SgAsmFunction *return_func = SageInterface::getEnclosingNode<SgAsmFunction>(imap.get_value_or(va, NULL));
            if (!return_func || return_func!=func) {
                return false;
            }
        } else {
            return false;
        }

        // Since the instruction pointer might point to a function entry address and since the top of the stack contains a
        // pointer to an instruction in this function, we assume that this is a function call.
        if (target_va && ip->is_number())
            *target_va = ip->get_number();
        if (return_va && top->is_number())
            *return_va = top->get_number();
        return true;
    }

    // Similar to the above method, but works when all we have is the basic block (e.g., this case gets hit quite a bit from
    // the Partitioner).  Returns true if, after executing the basic block, the top of the stack contains the fall-through
    // address of the basic block. We depend on our caller to figure out if the instruction pointer is reasonably a function
    // entry address.
    if (!interp && insns.size()<=EXECUTION_LIMIT) {
        using namespace Rose::BinaryAnalysis;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2;
        using namespace Rose::BinaryAnalysis::InstructionSemantics2::SymbolicSemantics;
        const RegisterDictionary *regdict = RegisterDictionary::dictionary_coldfire_emac();
        SmtSolverPtr solver = SmtSolver::instance(Rose::CommandLine::genericSwitchArgs.smtSolver);
        BaseSemantics::RiscOperatorsPtr ops = RiscOperators::instance(regdict, solver);
        DispatcherM68kPtr dispatcher = DispatcherM68k::instance(ops, 32);
        try {
            for (size_t i=0; i<insns.size(); ++i)
                dispatcher->processInstruction(insns[i]);
        } catch (const BaseSemantics::Exception &e) {
            return false;
        }

        // Look at the top of the stack
        SValuePtr top = SValue::promote(ops->readMemory(RegisterDescriptor(), ops->readRegister(dispatcher->REG_A[7]),
                                                        ops->protoval()->undefined_(32),
                                                        ops->protoval()->boolean_(true)));
        if (top->is_number() && top->get_number() == last->get_address()+last->get_size()) {
            if (target_va) {
                SValuePtr ip = SValue::promote(ops->readRegister(dispatcher->REG_PC));
                if (ip->is_number())
                    *target_va = ip->get_number();
            }
            if (return_va)
                *return_va = top->get_number();
            return true;
        }
    }

    return false;
}