Exemplo n.º 1
0
Arquivo: main.cpp Projeto: vagran/adk
        /** Drawing event handler. */
        virtual bool
        on_draw(const Cairo::RefPtr<Cairo::Context>& cr)
        {
            switch (_curShape) {
            case SHAPE_RECTANGLE:
                cr->rectangle(20, 20, 200, 100);
                cr->set_source_rgb(0, 0.8, 0);
                cr->fill_preserve();
                break;
            case SHAPE_ELLIPSE:
                cr->arc(150, 100, 90, 0, 2 * 3.14);
                cr->set_source_rgb(0.8, 0, 0);
                cr->fill_preserve();
                break;
            case SHAPE_TRIANGLE:
                cr->move_to(40, 40);
                cr->line_to(200, 40);
                cr->line_to(120, 160);
                cr->line_to(40, 40);
                cr->set_source_rgb(0.8, 0, 0.8);
                cr->fill_preserve();
                cr->set_line_cap(Cairo::LINE_CAP_ROUND);
                cr->set_line_join(Cairo::LINE_JOIN_ROUND);
                break;
            }

            cr->set_line_width(3);
            cr->set_source_rgb(0, 0, 0);
            cr->stroke();
            return true;
        }
Exemplo n.º 2
0
bool
ButtonWidget::on_expose_event(GdkEventExpose* event)
{
  Gtk::DrawingArea::on_expose_event(event);
  Glib::RefPtr<Gdk::Window> window = get_window();
  if(window)
    {
      Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();

      int w  = get_allocation().get_width()  - 10;
      int h  = get_allocation().get_height() - 10;

      cr->set_source_rgb(0.0, 0.0, 0.0);
      cr->set_line_width(1.0);
      cr->translate(5, 5);
      cr->rectangle(0, 0, w, h);
      
      if (down)
        cr->fill_preserve();

      cr->stroke();

      if (down)
        cr->set_source_rgb(1.0, 1.0, 1.0);

      // FIXME: There are better ways to center text
      if (name.size() == 2)
        cr->move_to(w/2-6, h/2+3);
      else
        cr->move_to(w/2-4, h/2+3);
      cr->show_text(name);
    }

  return true;
}
Exemplo n.º 3
0
void GraphicalItem::drawRoundedRectangle(
    const Cairo::RefPtr<Cairo::Context>& context,
    int x, int y,
    int width, int height,
    double aspect,
    double corner_radius,
    double red, double green, double blue)
{
    double radius = corner_radius / aspect;
    double degrees = M_PI / 180.0;

    context->begin_new_sub_path();
    context->arc(x + width - radius, y + radius, radius,
        -90 * degrees, 0 * degrees);
    context->arc(x + width - radius, y + height - radius,
        radius, 0 * degrees, 90 * degrees);
    context->arc(x + radius, y + height - radius, radius,
        90 * degrees, 180 * degrees);
    context->arc(x + radius, y + radius, radius,
        180 * degrees, 270 * degrees);
    context->close_path();

    context->set_source_rgb(red, green, blue);
    context->fill_preserve();
    setColor(Settings::settings().getForegroundColor(), context);
    context->stroke();
}
Exemplo n.º 4
0
static void
skillgui_cairo_render_bezier(GVJ_t * job, pointf * A, int n, int arrow_at_start,
		int arrow_at_end, int filled)
{
#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_start(__ttc_bezier);
  ++__num_bezier;
#endif
  //printf("Bezier\n");
  SkillGuiCairoRenderInstructor *cri = (SkillGuiCairoRenderInstructor *)job->context;
  Cairo::RefPtr<Cairo::Context> cairo = cri->get_cairo();
  obj_state_t *obj = job->obj;

  skillgui_cairo_set_penstyle(cairo, job);

  cairo->move_to(A[0].x, -A[0].y);
  for (int i = 1; i < n; i += 3)
    cairo->curve_to(A[i].x, -A[i].y, A[i + 1].x, -A[i + 1].y,
		    A[i + 2].x, -A[i + 2].y);
  if (filled) {
    skillgui_cairo_set_color(cairo, &(obj->fillcolor));
    cairo->fill_preserve();
  }
  skillgui_cairo_set_color(cairo, &(obj->pencolor));
  cairo->stroke();

#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_end(__ttc_bezier);
#endif
}
Exemplo n.º 5
0
		bool on_expose_event(GdkEventExpose* ev) {
			Glib::RefPtr< Gdk::Window > window = get_window();
			if (window) {
				Cairo::RefPtr< Cairo::Context > ctx = window->create_cairo_context();
				Gtk::Allocation alloc = get_allocation();
				const int height = alloc.get_height();
				const int width = alloc.get_width();

				ctx->scale(width, height); //escala para que ocupe siempre toda la pantalla. Notar que es ancho y después alto.
				ctx->set_line_width(ANCHO_LINEA);
				
				// contorno
				ctx->move_to(0.0, 1.0); // muevo hacia el punto inicial, que arbitrariamente elegí que fuera el de la izquierda abajo
				ctx->line_to(0.0, 0.0); // línea hacia el punto de arriba a la izquierda
				ctx->line_to(1.0, 0.0); // línea hacia el punto de arriba a la derecha
				ctx->line_to(1.0, 1.0); // línea hacia el punto de abajo a la derecha
				ctx->close_path(); // cierro el camino
				ctx->save(); // salvo porque voy a cambiar el color
					ctx->set_source_rgb(1.0, 1.0, 1.0); // seteo el color al blanco
					ctx->fill_preserve(); // relleno todo el cuadrado, preservando el camino para dibujar el contorno
				ctx->restore();
				ctx->stroke(); // pinto el camino en negro

				// triángulo azul de abajo
				ctx->move_to(0.0, 1.0); // muevo hacia el punto inicial, que arbitrariamente elegí que fuera el de la izquierda
				ctx->line_to(0.5, 0.5); // línea hacia el punto del medio
				ctx->line_to(1.0, 1.0); // línea hacia el punto de abajo a la derecha
				ctx->close_path(); // cierro el camino
				ctx->save(); // salvo porque voy a cambiar el color
					ctx->set_source_rgb(0.0, 0.0, 1.0); // seteo el color al azul
					ctx->fill_preserve(); // relleno todo triángulo, preservando el camino para dibujar el contorno
				ctx->restore();
				ctx->stroke(); // pinto el camino en negro

				// triángulo azul de arriba
				ctx->move_to(0.0, 0.0); // muevo hacia el punto inicial, que arbitrariamente elegí que fuera el de la izquierda
				ctx->line_to(0.5, 0.5); // línea hacia el punto del medio
				ctx->line_to(1.0, 0.0); // línea hacia el punto de arriba a la derecha
				ctx->close_path(); // cierro el camino
				ctx->save(); // salvo porque voy a cambiar el color
					ctx->set_source_rgb(0.0, 0.0, 1.0); // seteo el color al azul
					ctx->fill_preserve(); // relleno todo triángulo, preservando el camino para dibujar el contorno
				ctx->restore();
				ctx->stroke(); // pinto el camino en negro				
			}
			return true;			
		}
Exemplo n.º 6
0
		virtual bool on_draw(const Cairo::RefPtr<Cairo::Context>& cr)
		{
			Gtk::Allocation allocation = get_allocation();
			const int width = allocation.get_width();
			const int height = allocation.get_height();
			
			if(!drawing)
			{
				sort(objects.begin(), objects.end(), PlaneObjectColection::compare);
			}
			
			drawing=1;
			
			unsigned int i;
			unsigned int j;
			
			cr->set_line_width(2);
			
			Coordenate temp;
			
			for(i=0; i<objects.size(); i++)
			{
				if(objects[i].get_num_nodos()<2 || objects[i].z>=camera.z) continue;
				
				cr->save();
				
				temp=get_draw_location(objects[i].get_nodo_position(0), width, height, 26.5/M_PI);
					
				cr->line_to(temp.x, temp.y);
				
				cr->move_to(temp.x, temp.y);
				
				for(j=1; j<objects[i].get_num_nodos(); j++)
				{
					temp=get_draw_location(objects[i].get_nodo_position(j), width, height, 26.5/M_PI);
					
					cr->line_to(temp.x, temp.y);
				}
				
				temp=get_draw_location(objects[i].get_nodo_position(0), width, height, 26.5/M_PI);
				cr->line_to(temp.x, temp.y);
				
				temp=get_draw_location(objects[i].get_nodo_position(1), width, height, 26.5/M_PI);
				cr->line_to(temp.x, temp.y);
				
				cr->set_source_rgba(double(objects[i].fill_color.red)/255, double(objects[i].fill_color.green)/255, double(objects[i].fill_color.blue)/255, double(objects[i].fill_color.alpha)/255);
				cr->fill_preserve();
				cr->set_source_rgba(double(objects[i].line_color.red)/255, double(objects[i].line_color.green)/255, double(objects[i].line_color.blue)/255, double(objects[i].line_color.alpha)/255);
				cr->stroke();
				cr->restore();
			}
			
			return 1;
		}
Exemplo n.º 7
0
// ----------------------------------------------------------------------------
// -- Function    : draw_bar(cr)
// --
// -- Takes       : cr = point to a cairo reference
// --
// -- Purpose     : Assumes value is already between 1 and 0!  Draws the bar
//                  on the provided cairo reference.
void BarWidget::draw_bar(Cairo::RefPtr<Cairo::Context> cr)
{
    // Get our bar coords
    Size size = get_avail_rect();
    Size* s = &size;

    // Draw the bg first
    cr->set_line_width(bar_bg_border_width);
    cr->rectangle(s->x, s->y, s->width, s->height);

    // -- bg border
    if (draw_bar_bg_border)
    {
        bar_bg_border_color->set_source(cr);
        cr->stroke_preserve();
    }
    // -- bg
    if (draw_bar_bg)
    {
        bar_bg_color->set_source(cr);
        cr->fill_preserve();
    }

    // Clear the path
    cr->begin_new_path();

    // -- Now we're drawing the value bar
    // Modify the size by our value / percent
    // If we're horz, modify the width.
    // If we're vert, modify the height.
    if (vertical)
        s->height = s->height * m_value;
    else
        s->width = s->width * m_value;

    // New path, draw!
    cr->set_line_width(bar_border_width);
    cr->rectangle(s->x, s->y, s->width, s->height);

    // -- bar border
    if (draw_bar_border)
    {
        bar_border_color->set_source(cr);
        cr->stroke_preserve();
    }

    // -- Draw the bar
    bar_color->set_source(cr);
    cr->fill();

    // clean up
    cr->begin_new_path();
    s = nullptr;
}
Exemplo n.º 8
0
//! Only renders the shield background, the text is rendered in renderLabels
void Renderer::renderShields(const Cairo::RefPtr<Cairo::Context>& cr,
							 std::vector<shared_ptr<Shield> >& shields) const
{
	cr->save();

	cr->set_line_join(Cairo::LINE_JOIN_ROUND);

	for (auto& shield : shields)
	{
		const Style* s = shield->style;

		double x0, y0, height, width;
		double border = ceil(s->shield_frame_width/2.0 + s->shield_casing_width);
		x0 = shield->shield.minX + border;
		y0 = shield->shield.minY + border;
		width = shield->shield.getWidth() - 2*border;
		height = shield->shield.getHeight() - 2*border;
		if ((int) s->shield_frame_width % 2 == 1) {
			x0 -= 0.5;
			y0 -= 0.5;
		}
		if (s->shield_shape == Style::ShieldShape::ROUNDED) {
			cr->arc(x0 + height/2.0, y0 + height/2.0,
					height/2.0, boost::math::constants::pi<double>()/2.0, 3.0*boost::math::constants::pi<double>()/2.0);
			cr->arc(x0 + width - height/2.0, y0 + height/2.0,
					height/2.0, 3.0*boost::math::constants::pi<double>()/2.0, boost::math::constants::pi<double>()/2.0);
			cr->close_path();
		} else
			cr->rectangle(x0, y0, width, height);

		// shield casing
		if (s->shield_casing_width > 0) {
			cr->set_source_color(s->shield_casing_color),
			cr->set_line_width(s->shield_frame_width + s->shield_casing_width * 2.0);
			cr->stroke_preserve();
		}

		// shield background
		cr->set_source_color(s->shield_color),
		cr->fill_preserve();

		// shield frame
		cr->set_source_color(s->shield_frame_color),
		cr->set_line_width(s->shield_frame_width);
		cr->stroke();
	}

	cr->restore();
}
Exemplo n.º 9
0
void BezierPath::Invocation::draw(const Cairo::RefPtr<Cairo::Context> & cr)
{
	if (!path) return;	
	
	//Execute the bezier path.
	path->execute(cr);
	
	//Stroke, fill or do both.
	if (stroke && fill) {
		cr->fill_preserve();
		cr->stroke();
	}
	else if (stroke) cr->stroke();
	else if (fill)   cr->fill();
}
Exemplo n.º 10
0
    void NodeSurface::DrawRoundedRectangle( 
        Cairo::RefPtr<Cairo::Context> refCairo, 
        double x, 
        double y, 
        double width, 
        double height, 
        double radius,
        double red,
        double green,
        double blue,
        bool selected )
    {
        refCairo->save();

        if ( (radius > height/2.0) || (radius > width/2.0) )
        {
            radius = std::min<double>(height / 2, width / 2);
        }

        refCairo->move_to( x, y + radius );
        refCairo->arc( x + radius, y + radius, radius, sk_pi, -sk_pi / 2.0 );
        refCairo->line_to( x + width - radius, y );
        refCairo->arc( x + width - radius, y + radius, radius, -sk_pi / 2.0, 0 );
        refCairo->line_to( x + width, y + height - radius );
        refCairo->arc( x + width - radius, y + height - radius, radius, 0, sk_pi / 2.0 );
        refCairo->line_to( x + radius, y + height );
        refCairo->arc( x + radius, y + height - radius, radius, sk_pi / 2.0, sk_pi );
        refCairo->close_path();

        refCairo->set_source_rgb( red, green, blue );
        refCairo->fill_preserve();

        if ( selected == true )
        {
            refCairo->set_source_rgb( 1.0, 0.0, 0.0 );
            refCairo->set_line_width( 2 );
            refCairo->stroke();   
        }
        else
        {
            refCairo->set_source_rgb( 0.0, 0.0, 0.0 );
            refCairo->set_line_width( 1 );
            refCairo->stroke();   
        }            

        refCairo->restore();
    }
Exemplo n.º 11
0
void enigma_rotor_window::draw_wheel_pos(Cairo::RefPtr<Cairo::Context> cr, gunichar new_pos)
{
    wheel_pos = new_pos; 
    const char *trans_2 = "00000000011111111112222222";
    const char *trans_1 = "12345678901234567890123456";
    int win_size = ((int)(padded_size)) - 1;
    
    cr->save();
        
        // Draw background of rotor window as a rectangle filled with the rotor background colour
        cr->set_source_rgb(rotor_r, rotor_g, rotor_b);
        cr->rectangle(x - win_size / 2, y - win_size / 2, win_size, win_size); // Set path
        cr->fill_preserve(); // Fill everyting inside the path and preserve the path
        
        // Draw black border around the path, i.e. the rectangle that represents the rotor window        
        cr->set_line_width(1.0);
        cr->set_source_rgb(BLACK);
        cr->stroke();
    
    cr->restore();
    
    cr->save();
        
        // Set colour in which to draw the rotor position
        if (!is_greek)
            cr->set_source_rgb(BLACK); // Default is black
        else
            cr->set_source_rgb(RED); // The greek wheel on M4 has red markings
        
        if (!is_numeric)
        {
            // rotor position is displayed as character A-Z
            print_char(cr, x, y, new_pos, font_size_char);
        }
        else
        {
            // rotor position is displayed as a number 01, 02, ..., 26
            print_char(cr, x - char_width_numeric / 2, y, trans_2[new_pos - 'A'], font_size_numeric);
            print_char(cr, x + char_width_numeric / 2, y, trans_1[new_pos - 'A'], font_size_numeric);   
        }
    
    cr->restore();    
}
Exemplo n.º 12
0
void GraphicalItem::drawRectangle(const Cairo::RefPtr<Cairo::Context>& context,
    int x, int y,
    int width, int height,
    double red, double green, double blue)
{
    context->begin_new_sub_path();

    context->move_to(x, y);
    context->line_to(x + width, y);
    context->line_to(x + width, y + height);
    context->line_to(x, y + height);
    context->line_to(x, y);

    context->close_path();

    context->set_source_rgb(red, green, blue);
    context->fill_preserve();
    setColor(Settings::settings().getForegroundColor(), context);
    context->stroke();
}
Exemplo n.º 13
0
static void
skillgui_cairo_render_ellipse(GVJ_t *job, pointf *A, int filled)
{
#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_start(__ttc_ellipse);
  ++__num_ellipse;
#endif
  //printf("Render ellipse\n");
  SkillGuiCairoRenderInstructor *cri = (SkillGuiCairoRenderInstructor *)job->context;
  Cairo::RefPtr<Cairo::Context> cairo = cri->get_cairo();
  obj_state_t *obj = job->obj;

  Cairo::Matrix old_matrix;
  cairo->get_matrix(old_matrix);

  skillgui_cairo_set_penstyle(cairo, job);

  cairo->translate(A[0].x, -A[0].y);

  double rx = A[1].x - A[0].x;
  double ry = A[1].y - A[0].y;
  cairo->scale(1, ry / rx);
  cairo->move_to(rx, 0);
  cairo->arc(0, 0, rx, 0, 2 * M_PI);
  cairo->close_path();

  cairo->set_matrix(old_matrix);

  if (filled) {
    skillgui_cairo_set_color(cairo, &(obj->fillcolor));
    cairo->fill_preserve();
  }
  skillgui_cairo_set_color(cairo, &(obj->pencolor));
  cairo->stroke();

#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_end(__ttc_ellipse);
#endif
}
Exemplo n.º 14
0
static void
skillgui_cairo_render_polygon(GVJ_t *job, pointf *A, int n, int filled)
{
#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_start(__ttc_polygon);
  ++__num_polygon;
#endif
  //printf("Polygon\n");
  SkillGuiCairoRenderInstructor *cri = (SkillGuiCairoRenderInstructor *)job->context;
  Cairo::RefPtr<Cairo::Context> cairo = cri->get_cairo();
  obj_state_t *obj = job->obj;

  skillgui_cairo_set_penstyle(cairo, job);

  cairo->move_to(A[0].x, -A[0].y);
  for (int i = 1; i < n; ++i) {
    cairo->line_to(A[i].x, -A[i].y);
  }
  cairo->close_path();

  if (filled) {
    skillgui_cairo_set_color(cairo, &(obj->fillcolor));
    cairo->fill_preserve();
  }

  // HACK to workaround graphviz bug any get the Tim style...
  if ( obj->type == CLUSTER_OBJTYPE ) {
    obj->pencolor.u.RGBA[0] = 0.666;
    obj->pencolor.u.RGBA[1] = 0.666;
    obj->pencolor.u.RGBA[2] = 1.0;
    obj->pencolor.u.RGBA[3] = 1.0;
  }
  skillgui_cairo_set_color(cairo, &(obj->pencolor));
  cairo->stroke();

#ifdef USE_GVPLUGIN_TIMETRACKER
  __tt.ping_end(__ttc_polygon);
#endif
}
Exemplo n.º 15
0
bool CPagePreview::on_expose_event(GdkEventExpose *event)
	{
	std::cout << "Fired!\n";
			
	Glib::RefPtr<Gdk::Window> window = get_window();
	if(window)
		{
		// get the cairo context amd allocation
		Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
		Gtk::Allocation allocation = get_allocation();
		const int width = allocation.get_width();
		const int height = allocation.get_height();
		
		// coordinates for the center of the window
		int xc, yc;
		xc = width / 2;
		yc = height / 2;

		
		// clip to the area indicated by the expose event so that we only redraw
		// the portion of the window that needs to be redrawn
		cr->rectangle(event->area.x, event->area.y,
				event->area.width, event->area.height);
		cr->clip();
		
		double border = 0.05;
		double offset = 2.0;
		
		// draw a neat shadow
		cr->set_source_rgba(0.0,0.0,0.0,0.4);
		cr->begin_new_path();
		cr->move_to( width*border+offset,height*border+offset );
		cr->line_to( width*(1.0-border)+offset,height*border+offset );
		cr->line_to( width*(1.0-border)+offset,height*(1.0-border)+offset );
		cr->line_to( width*border+offset,height*(1.0-border)+offset );
		cr->close_path();
		cr->fill();

		// draw the page outline
		cr->set_source_rgb(0.0,0.0,0.0); // black
		cr->set_line_width( 1.0 );
		cr->begin_new_sub_path();
		cr->move_to( width*border-offset,height*border-offset );
		cr->line_to( width*(1.0-border)-offset,height*border-offset );
		cr->line_to( width*(1.0-border)-offset,height*(1.0-border)-offset );
		cr->line_to( width*border-offset,height*(1.0-border)-offset );
		cr->close_path();
		cr->stroke_preserve();
		
		// fill the page with white
		cr->save();
		cr->set_source_rgb(1.0,1.0,1.0); // white
		cr->fill_preserve();
		cr->restore();

		// and the image preview
		ImagePixbuf->render_to_drawable( get_window(),
									get_style()->get_black_gc(),
									0,
									0,
									(width-ImagePixbuf->get_width())/2,
									(height-ImagePixbuf->get_height())/2,
									ImagePixbuf->get_width(), //image->get_width(),
									ImagePixbuf->get_height(), //image->get_height(),
									Gdk::RGB_DITHER_NONE,0,0 ); // */
									
		return true;
		}
	}
Exemplo n.º 16
0
/** Draw laser segments as produced by leg tracker application.
 * @param itf either Laser360Interface or Laser720Interface
 * @param window Gdk window
 * @param cr Cairo context to draw to. It is assumed that possible transformations
 * have been setup before.
 */
void
LaserDrawingArea::draw_segments(const fawkes::Interface* itf,
                                Glib::RefPtr<Gdk::Window> &window,
				const Cairo::RefPtr<Cairo::Context> &cr)
{
  size_t nd = __laser_segmentation_if->maxlenof_distances();
  const float nd_factor = 360.0 / nd;

  float *distances;
  const fawkes::Laser360Interface* itf360 = NULL;
  const fawkes::Laser720Interface* itf720 = NULL;
  if ((itf360 = dynamic_cast<const fawkes::Laser360Interface*>(itf))) {
    distances = itf360->distances();
  } else if ((itf720 = dynamic_cast<const fawkes::Laser720Interface*>(itf))) {
    distances = itf720->distances();
  } else {
    throw fawkes::Exception("Interface is neither Laser360Interface nor Laser720Interface");
  }

  cr->save();
  /* DRAW SEGMENTS (draw the segment interiors again with other color*/
  if( __laser_segmentation_if && __laser_segmentation_if->has_writer()){
    if(!__break_drawing)
      __laser_segmentation_if->read();
    float * segmentations = __laser_segmentation_if->distances();
    size_t nd = __laser_segmentation_if->maxlenof_distances();
    //	cr->set_source_rgba(0,0,0,0.5);
    cr->set_source_rgb(1,1,0);

    if ( __draw_mode == MODE_POINTS ) {
      for (size_t i = 0; i < nd; i += __resolution) {
	if( segmentations[i]==0) continue;  // dont draw the segment borders
	if ( distances[i] == 0 || ! std::isfinite(distances[i]))  continue;
	float anglerad = deg2rad(i * nd_factor);
	cr->move_to(0, 0);
	cr->line_to(distances[i] *  sin(anglerad),
		    distances[i] * -cos(anglerad));
      }
      cr->stroke();
    } else {//if ( __draw_mode == MODE_LINES ) {
      float radius = 4 / __zoom_factor;
      for (size_t i = 0; i < nd; i += __resolution) {
	if( segmentations[i]==0) continue;  // dont draw the segment borders
	if ( distances[i] == 0 )  continue;
	float anglerad = deg2rad(i * nd_factor);
	float x = distances[i] *  sin(anglerad);
	float y = distances[i] * -cos(anglerad);
	// circles replaced by rectangles, they are a *lot* faster
	//cr->move_to(x, y);
	//cr->arc(x, y, radius, 0, 2*M_PI);
	cr->rectangle(x, y, radius, radius);
      }
      cr->fill_preserve();
      cr->stroke();
    } 
    /*else {
      cr->move_to(0, - distances[0]);
      for (size_t i = __resolution; i <= nd + __resolution; i += __resolution) {
      if ( distances[i] == 0 )  continue;
      float anglerad    = deg2rad(i % 360);
      cr->line_to(distances[i % 360] *  sin(anglerad),
      distances[i % 360] * -cos(anglerad));
      }
      cr->stroke();
      }
    */
  }
  cr->restore();
}
Exemplo n.º 17
0
/** Draw Beams of an interface.
 * Draws the beams as lines, circles or hull, depending on draw mode.
 * @param itf either Laser360Interface or Laser720Interface
 * @param window Gdk window
 * @param cr Cairo context to draw to. It is assumed that possible transformations
 * have been setup before.
 */
void
LaserDrawingArea::draw_beams(const fawkes::Interface *itf,
                             Glib::RefPtr<Gdk::Window> &window,
			     const Cairo::RefPtr<Cairo::Context> &cr)
{
  float *distances;
  size_t nd;
  bool clockwise;
  const fawkes::Laser360Interface* itf360 = NULL;
  const fawkes::Laser720Interface* itf720 = NULL;
  if ((itf360 = dynamic_cast<const fawkes::Laser360Interface*>(itf))) {
    distances = itf360->distances();
    nd = itf360->maxlenof_distances();
    clockwise = itf360->is_clockwise_angle();
  } else if ((itf720 = dynamic_cast<const fawkes::Laser720Interface*>(itf))) {
    distances = itf720->distances();
    nd = itf720->maxlenof_distances();
    clockwise = itf720->is_clockwise_angle();
  } else {
    throw fawkes::Exception("Interface is neither Laser360Interface nor Laser720Interface");
  }

  const float nd_factor = 360.0 / nd;


  float *revdists = NULL;
  if (! clockwise) {
    // re-arrange to clockwise
    revdists = (float *)new float[nd];
    for (size_t i = 0; i < nd; ++i) {
      revdists[nd - i] = distances[i];
    }
    distances = revdists;
  }

  cr->scale(__zoom_factor, __zoom_factor);
  cr->rotate(__rotation);
  cr->set_line_width(1. / __zoom_factor);

  draw_scalebox(window, cr);

  if ( __draw_mode == MODE_LINES ) {
    for (size_t i = 0; i < nd; i += __resolution) {
      if ( distances[i] == 0 || ! std::isfinite(distances[i]) )  continue;
      const float anglerad = deg2rad(i * nd_factor);
      cr->move_to(0, 0);
      cr->line_to(distances[i] *  sin(anglerad),
		  distances[i] * -cos(anglerad));
    }
    cr->stroke();
  } else if ( __draw_mode == MODE_POINTS ) {
    const float radius = 4 / __zoom_factor;
    for (size_t i = 0; i < nd; i += __resolution) {
      if ( distances[i] == 0 )  continue;
      float anglerad = deg2rad(i * nd_factor);
      float x = distances[i] *  sin(anglerad);
      float y = distances[i] * -cos(anglerad);
      // circles replaced by rectangles, they are a *lot* faster
      //cr->move_to(x, y);
      //cr->arc(x, y, radius, 0, 2*M_PI);
      cr->rectangle(x, y, radius, radius);
    }
    cr->fill_preserve();
    cr->stroke();
  } else {
    cr->move_to(0, - distances[0]);
    for (size_t i = __resolution; i <= nd + __resolution; i += __resolution) {
      if ( distances[i] == 0 )  continue;
      const float anglerad    = normalize_rad(deg2rad(i * nd_factor));
      cr->line_to(distances[i % nd] *  sin(anglerad),
		  distances[i % nd] * -cos(anglerad));
    }
    cr->stroke();
  }

  if (revdists) delete[] revdists;
}
Exemplo n.º 18
0
/** Expose event handler.
 * @param event event info structure.
 * @return signal return value
 */
bool
LaserDrawingArea::on_expose_event(GdkEventExpose* event)
#endif
{
  // This is where we draw on the window
  Glib::RefPtr<Gdk::Window> window = get_window();
  if(window) {
    Gtk::Allocation allocation = get_allocation();

    if(__first_draw)
    {
      __first_draw = false;
      const int width = allocation.get_width();
      const int height = allocation.get_height();
    
      // coordinates for the center of the window
      __xc = width / 2;
      __yc = height / 2;
    }
#if GTK_VERSION_LT(3,0)
    Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
#endif
    cr->set_line_width(1.0);

    cr->set_source_rgb(1, 1, 1);
#if GTK_VERSION_LT(3,0)
    // clip to the area indicated by the expose event so that we only
    // redraw the portion of the window that needs to be redrawn
    cr->rectangle(event->area.x, event->area.y,
		  event->area.width, event->area.height);
    cr->fill_preserve();
    cr->clip();
#else
    cr->paint();
#endif
    cr->set_source_rgb(0, 0, 0);
    //cr->set_source_rgba(0,0,0,1);

    //    __last_xc += __translation_x;
    //    __last_yc += __translation_y;
    cr->translate(__xc, __yc);
  
    cr->save();
    if (! __connected) {
      Cairo::TextExtents te;
      std::string t = "Not connected to BlackBoard";
      cr->set_source_rgb(1, 0, 0);
      cr->set_font_size(20);
      cr->get_text_extents(t, te);
      cr->move_to(- te.width / 2, -te.height / 2);
      cr->show_text(t);
    } else if ( __laser_ifs.empty() ) {
      Cairo::TextExtents te;
      std::string t = "No interface opened";
      cr->set_source_rgb(1, 0, 0);
      cr->set_font_size(20);
      cr->get_text_extents(t, te);
      cr->move_to(- te.width / 2, -te.height / 2);
      cr->show_text(t);
    } else if (! all_laser_ifs_have_writer() ) {
      Cairo::TextExtents te;
      std::string t = "No writer for ";
      for (std::list<InterfaceColorPair>::const_iterator it = __laser_ifs.begin();
           it != __laser_ifs.end(); ++it) {
        fawkes::Interface* itf = it->first;
        if (!itf->has_writer()) {
          t += itf->uid();
          t += ' ';
        }
      }
      cr->set_source_rgb(1, 0, 0);
      cr->set_font_size(20);
      cr->get_text_extents(t, te);
      cr->move_to(- te.width / 2, -te.height / 2);
      cr->show_text(t);
    } else {
      if (! __break_drawing) {
        for (std::list<InterfaceColorPair>::const_iterator it = __laser_ifs.begin();
             it != __laser_ifs.end(); ++it) {
          fawkes::Interface* laser_if = it->first;
          laser_if->read();
        }
      }

      for (std::list<InterfaceColorPair>::const_iterator it = __laser_ifs.begin();
           it != __laser_ifs.end(); ++it) {
        const fawkes::Interface* laser_if = it->first;
        const Color& color = it->second;
        cr->save();
        cr->set_source_rgb(color.r, color.g, color.b);
        draw_beams(laser_if, window, cr);
        cr->restore();
      }
      if (__robot_drawer)  __robot_drawer->draw_robot(window, cr);
      for (std::list<InterfaceColorPair>::const_iterator it = __laser_ifs.begin();
           it != __laser_ifs.end(); ++it) {
        const fawkes::Interface* laser_if = it->first;
        const Color& color = it->second;
        cr->save();
        cr->set_source_rgb(color.r, color.g, color.b);
        draw_segments(laser_if, window, cr);
        cr->restore();
      }
      draw_persons_legs(window, cr);

      if(__switch_if != NULL && __switch_if->has_writer()){
	SwitchInterface::EnableSwitchMessage *esm = new SwitchInterface::EnableSwitchMessage();
	__switch_if->msgq_enqueue(esm);
      }
    }
    cr->restore();

    cr->save();
    cr->rotate(0.5 * M_PI + __rotation);
    cr->scale(-__zoom_factor, __zoom_factor);
    cr->set_line_width(1. / __zoom_factor);
    if (__visdisp_if) {
      __visdisp->process_messages();
      __visdisp->draw(cr);
    }

    const float radius = 0.01;
    if (__line_if) {
      __line_if->read();
      if (__line_if->has_writer() &&
	  __line_if->is_valid() && __line_if->is_visible()) {

	cr->set_source_rgb(1, 0, 0);
	/*
	std::vector<double> dashes(1);
	dashes[0] = 0.1;
	cr->set_dash(dashes, 0);
	*/
	cr->rectangle(__line_if->world_x() - radius * 0.5, __line_if->world_y() - radius * 0.5, radius, radius);
	cr->rectangle(__line_if->relative_x() - radius * 0.5, __line_if->relative_y() - radius * 0.5, radius, radius);
	cr->fill_preserve();
	cr->stroke();
	cr->move_to(__line_if->world_x(), __line_if->world_y());
	cr->line_to(__line_if->relative_x(), __line_if->relative_y());
	cr->stroke();
      }
    }
    cr->restore();
  }

  return true;
}
Exemplo n.º 19
0
bool CalibrationArea::on_expose_event(GdkEventExpose *event)
{
    // check that screensize did not change
    if (display_width != get_width() ||
         display_height != get_height()) {
        set_display_size(get_width(), get_height());
    }

    Glib::RefPtr<Gdk::Window> window = get_window();
    if (window) {
        Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
        cr->save();

        cr->rectangle(event->area.x, event->area.y, event->area.width, event->area.height);
        cr->clip();

        // Print the text
        cr->set_font_size(font_size);
        double text_height = -1;
        double text_width = -1;
        Cairo::TextExtents extent;
        for (int i = 0; i != help_lines; i++) {
            cr->get_text_extents(help_text[i], extent);
            text_width = std::max(text_width, extent.width);
            text_height = std::max(text_height, extent.height);
        }
        text_height += 2;

        double x = (display_width - text_width) / 2;
        double y = (display_height - text_height) / 2 - 60;
        cr->set_line_width(2);
        cr->rectangle(x - 10, y - (help_lines*text_height) - 10,
                text_width + 20, (help_lines*text_height) + 20);

        // Print help lines
        y -= 3;
        for (int i = help_lines-1; i != -1; i--) {
            cr->get_text_extents(help_text[i], extent);
            cr->move_to(x + (text_width-extent.width)/2, y);
            cr->show_text(help_text[i]);
            y -= text_height;
        }
        cr->stroke();

        // Draw the points
        for (int i = 0; i <= calibrator->get_numclicks(); i++) {
            // set color: already clicked or not
            if (i < calibrator->get_numclicks())
                cr->set_source_rgb(1.0, 1.0, 1.0);
            else
                cr->set_source_rgb(0.8, 0.0, 0.0);

            cr->set_line_width(1);
            cr->move_to(X[i] - cross_lines, Y[i]);
            cr->rel_line_to(cross_lines*2, 0);
            cr->move_to(X[i], Y[i] - cross_lines);
            cr->rel_line_to(0, cross_lines*2);
            cr->stroke();

            cr->arc(X[i], Y[i], cross_circle, 0.0, 2.0 * M_PI);
            cr->stroke();
        }

        // Draw the clock background
        cr->arc(display_width/2, display_height/2, clock_radius/2, 0.0, 2.0 * M_PI);
        cr->set_source_rgb(0.5, 0.5, 0.5);
        cr->fill_preserve();
        cr->stroke();

        cr->set_line_width(clock_line_width);
        cr->arc(display_width/2, display_height/2, (clock_radius - clock_line_width)/2,
             3/2.0*M_PI, (3/2.0*M_PI) + ((double)time_elapsed/(double)max_time) * 2*M_PI);
        cr->set_source_rgb(0.0, 0.0, 0.0);
        cr->stroke();


        // Draw the message (if any)
        if (message != NULL) {
            // Frame the message
            cr->set_font_size(font_size);
            Cairo::TextExtents extent;
            cr->get_text_extents(this->message, extent);
            text_width = extent.width;
            text_height = extent.height;

            x = (display_width - text_width) / 2;
            y = (display_height - text_height + clock_radius) / 2 + 60;
            cr->set_line_width(2);
            cr->rectangle(x - 10, y - text_height - 10,
                    text_width + 20, text_height + 25);

            // Print the message
            cr->move_to(x, y);
            cr->show_text(this->message);
            cr->stroke();
        }

        cr->restore();
    }

    return true;
}
Exemplo n.º 20
0
 void Fader(Cairo::RefPtr<Cairo::Context> cr, float x, float y, float value, float rms, float falloff)
 {
   // draw invisible from the last widget
   cr->set_source_rgba(0,0,0,0);
   cr->move_to( x, y );
   cr->stroke();
   
   x = x + 4; // global move widget relative to positioning
   
   // Create the linear gradient diagonal
   //Cairo::RefPtr< Cairo::LinearGradient > linGrad = Cairo::LinearGradient::create (x, y, 100, 100);
   
   // Set grandient colors
   //linGrad->add_color_stop_rgb (0, 10 / 255.f, 246 / 255.f, 98 / 255.f );
   //linGrad->add_color_stop_rgb (1, 192 / 255.f, 246 / 255.f, 98 / 255.f );
   
   // Draw rectangle and fill with gradient
   cairo_pattern_t *pat;
   pat = cairo_pattern_create_linear (0.0, 0.0,  0.0, 400.0);
   cairo_pattern_add_color_stop_rgb(pat, 0,   0 / 255.f, 153 / 255.f, 255 / 255.f );
   cairo_pattern_add_color_stop_rgb(pat, 1,  26 / 255.f,  26 / 255.f,  26 / 255.f );
   cr->rectangle   (x, y, 12, 94);
   cairo_set_source(cr->cobj(), pat);
   cairo_fill      (cr->cobj());
   cairo_pattern_destroy (pat);
   
   // red area on top of fader graphic
   cr->rectangle ( x, y, 12, 25 );
   setColour(cr, COLOUR_ORANGE_1 );
   cr->fill();
   
   float tmpRms = (1-rms);
   
   //std::cout << "Falloff: " << falloff << " RMS " << rms << std::endl;
   
   if ( falloff > rms )
   {
     //std::cout << "Falloff > RMS" << std::endl;
     tmpRms = (1-falloff);
     falloff -= 0.1;
   }
   else
   {
     falloff = rms;
   }
   
   //std::cout << " tmpRms " << tmpRms << "  drawPx:  " << tmpRms * 94 << std::endl;
   
   cr->rectangle ( x, y, 12, 94 * tmpRms );
   setColour(cr, COLOUR_GREY_2 );
   cr->fill();
   
   // draw fader  <|
   float playheadX = x + 12;
   float playheadY = y + (92 * ( 1.f - value));
   
   setColour(cr, COLOUR_ORANGE_1 );
   cr->set_line_width(0.8);
   cr->move_to( playheadX, playheadY );
   cr->line_to( playheadX + 10, playheadY + 5.5 );
   cr->line_to( playheadX + 10, playheadY - 5.5 );
   cr->close_path();
   cr->fill_preserve();
   
   // draw fader |>
   cr->move_to( x, playheadY );
   cr->line_to( x - 10, playheadY + 5.5 );
   cr->line_to( x - 10, playheadY - 5.5 );
   cr->close_path();
   cr->fill_preserve();
   cr->stroke();
   
   // line between fader markers |> --- <|
   setColour(cr, COLOUR_GREY_4 );
   cr->set_line_width(2);
   cr->move_to( x, playheadY );
   cr->line_to( x + 12, playheadY );
   cr->stroke();
 }
bool SamplerWidget::on_expose_event(GdkEventExpose* event)
{
	// This is where we draw on the window
	Glib::RefPtr<Gdk::Window> window = get_window();
	
	if(window)    // Only run if Window does exist
	{
		allocation = get_allocation();
		int width = allocation.get_width();
		int height = allocation.get_height();
		
		//std::cout << "Width: " << width << std::endl;
		//std::cout << "Height: " << height << std::endl;
		//std::cout << "Height / 12: " << height /12.0 << std::endl;
		
		// coordinates for the center of the window
		int xc, yc;
		xc = width / 2;
		yc = height / 2;
		
		Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
		
		// clip to the area indicated by the expose event so that we only redraw
		// the portion of the window that needs to be redrawn
		//cr -> set_source_rgba(0 , 0, 0 , 1);
		cr->rectangle(event->area.x, event->area.y,
		        event->area.width, event->area.height);
		//cr->rectangle(0,0,event->area.x,event->area.y);
		//cr->stroke_preserve();
		cr->clip();
		
		cr -> set_line_join (Cairo::LINE_JOIN_ROUND);
		
		cr -> move_to( 7, 7);
		cr -> line_to( width-7, 7);
		cr -> line_to( width-7, height-7);
		cr -> line_to( 7, height-7);
		cr -> close_path();
		
		// Draw outline shape
		cr -> set_source_rgb (0.1,0.1,0.1);
		cr -> fill_preserve();
		
		if (!padOnBool)
		{
			cr->set_source_rgba( 0.6, 0.6, 0.6, 0.5);
			cr->set_line_width ( 10.0);
			cr->stroke();
		}
		else
		{
			cr->set_source_rgba( 1.0,0.4,0.0, 0.8);
			cr->set_line_width ( 10.4);
			cr->stroke();
		}
		
		/* Pan functionality Not yet implemented in sampler.
		
		// Draw Pan line: pixel pan = width * pan
		cr -> set_line_cap (Cairo::LINE_CAP_ROUND);
		cr -> set_line_width ( 4.8);
		cr -> set_source_rgba( 1.0,0.8,0.8,0.8);
		cr -> move_to ( width/2 + ((width*pan)/2) , height - (height*volume) + 20);
		cr -> line_to ( width/2 + ((width*pan)/2) , height - (height*volume) - 20);
		cr -> stroke();
		*/
		
		// Draw Volume line: pixel vol = height * volume
		cr -> set_line_width ( 5.1);
		cr -> set_source_rgb( 0.2,0.2,0.2);
		cr -> move_to ( 10      , (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, height-10);
		cr -> line_to ( 10, height-10);
		cr -> close_path();
		cr -> fill();
		
		// Draw Mode: Loop/Hit
		
		if ( !loopSampleBool)
		{
			cr->set_line_width ( 2.2);
			cr->set_source_rgb(0.2,0.2,0.2);
			cr->move_to(width/5,(height/5)*2);
			cr->line_to((width/5)*3,(height/5)*2);
			cr->line_to((width/5)*3,(height/5)*1);
			cr->line_to((width/5)*4,height/2);		// point of arrow
			cr->line_to((width/5)*3,(height/5)*4);
			cr->line_to((width/5)*3,(height/5)*3);
			cr->line_to(width/5,(height/5)*3);
			cr->close_path();
			cr->fill_preserve();
			
			cr->set_source_rgb(0.0,0.9,0.0);
			cr->stroke();
		}
		else // Loop Sample
		{
			cr -> set_source_rgb(0.2,0.2,0.2);
			cr -> arc_negative	(width/2, height/2, ((height  + width)/8)-5 , 6.0, 0.6); 	// inner curve
			cr -> arc			(width/2, height/2, ((height  + width)/6)-5 , 0.5, 6.1); 	// outer curve
			
			cr -> line_to		((width-width/3.5) + width/8  ,	height/2 - height/18 ); 	// right point of arrow
			cr -> line_to		( width-width/3.5,				height/2 + height/18 ); 	// point of arrow
			cr -> line_to		((width-width/3.5) - width/8  ,	height/2 - height/18 ); 	// left point of arrow
			cr -> close_path();
			cr -> fill_preserve();
			cr -> set_line_width(1.9);
			cr -> set_source_rgb(0.0,0.9,0.0);
			cr -> stroke();
		}
		
		// Impose orange volume line (over SampleLoop/Play)
		cr -> move_to ( 10      , (height - ((height-20)*volume))-8 );
		cr -> line_to ( width-10, (height - ((height-20)*volume))-8 );
		cr -> set_source_rgb(1.0,0.4,0.0);
		cr -> stroke();
		
		// Draw Text in center. Audio Clip name.
		cr -> set_source_rgb( 1.0,0.4,0.0);
		cr -> select_font_face ("Impact" , Cairo::FONT_SLANT_NORMAL,Cairo::FONT_WEIGHT_NORMAL);
		cr -> set_font_size ( 3 + xc/4 );
		Cairo::TextExtents extents;
		std::transform(sampleName.begin(), sampleName.end(), sampleName.begin(), toupper);
		cr -> get_text_extents(sampleName, extents);
		cr -> move_to ( xc - extents.width/2 , height/2+height/18);
		cr -> show_text (sampleName); // sampleName defined in hpp as std::string
	} 
	return true;
}
Exemplo n.º 22
0
void area___::test__(){
	int width, height;
	width=da_->get_allocation().get_width();
	height=da_->get_allocation().get_height();

	double m_radius=0.42;
	double m_line_width=0.05;

	// scale to unit square and translate (0, 0) to be (0.5, 0.5), i.e.
	// the center of the window
	cr_->scale(width, height);
	cr_->translate(0.5, 0.5);
	cr_->set_line_width(m_line_width);

	cr_->save();
	cr_->set_source_rgba(0.337, 0.612, 0.117, 0.9);   // green
	cr_->paint();
	cr_->restore();
	cr_->arc(0, 0, m_radius, 0, 2 * M_PI);
	cr_->save();
	cr_->set_source_rgba(1.0, 1.0, 1.0, 0.8);
	cr_->fill_preserve();
	cr_->restore();
	cr_->stroke_preserve();
	cr_->clip();

	//clock ticks
	for (int i = 0; i < 12; i++)
	{
		double inset = 0.05;

		cr_->save();
		cr_->set_line_cap(Cairo::LINE_CAP_ROUND);

		if(i % 3 != 0)
		{
			inset *= 0.8;
			cr_->set_line_width(0.03);
		}

		cr_->move_to(
				(m_radius - inset) * cos (i * M_PI / 6),
				(m_radius - inset) * sin (i * M_PI / 6));
		cr_->line_to (
				m_radius * cos (i * M_PI / 6),
				m_radius * sin (i * M_PI / 6));
		cr_->stroke();
		cr_->restore(); // stack-pen-size
	}

	// store the current time
	time_t rawtime;
	time(&rawtime);
	struct tm * timeinfo = localtime (&rawtime);

	// compute the angles of the indicators of our clock
	double minutes = timeinfo->tm_min * M_PI / 30;
	double hours = timeinfo->tm_hour * M_PI / 6;
	double seconds= timeinfo->tm_sec * M_PI / 30;
	cout<<timeinfo->tm_min<<","<<timeinfo->tm_hour<<","<<timeinfo->tm_sec<<endl;

	cr_->save();
	cr_->set_line_cap(Cairo::LINE_CAP_ROUND);

	// draw the seconds hand
	cr_->save();
	cr_->set_line_width(m_line_width / 3);
	cr_->set_source_rgba(0.7, 0.7, 0.7, 0.8); // gray
	cr_->move_to(0, 0);
	cr_->line_to(sin(seconds) * (m_radius * 0.9),
			-cos(seconds) * (m_radius * 0.9));
	cr_->stroke();
	cr_->restore();

	// draw the minutes hand
	cr_->set_source_rgba(0.117, 0.337, 0.612, 0.9);   // blue
	cr_->move_to(0, 0);
	cr_->line_to(sin(minutes + seconds / 60) * (m_radius * 0.8),
			-cos(minutes + seconds / 60) * (m_radius * 0.8));
	cr_->stroke();

	// draw the hours hand
	cr_->set_source_rgba(0.337, 0.612, 0.117, 0.9);   // green
	cr_->move_to(0, 0);
	cr_->line_to(sin(hours + minutes / 12.0) * (m_radius * 0.5),
			-cos(hours + minutes / 12.0) * (m_radius * 0.5));
	cr_->stroke();
	cr_->restore();

	// draw a little dot in the middle
	cr_->arc(0, 0, m_line_width / 3.0, 0, 2 * M_PI);
	cr_->fill();
}
Exemplo n.º 23
0
	void fill_preserve__(){
		cr_->fill_preserve();
	}
Exemplo n.º 24
0
void
Renderer_Ducks::render_vfunc(
	const Glib::RefPtr<Gdk::Drawable>& drawable,
	const Gdk::Rectangle& /*expose_area*/
)
{
	assert(get_work_area());
	if(!get_work_area())
		return;

	const synfig::Point window_start(get_work_area()->get_window_tl());
	const float pw(get_pw()),ph(get_ph());

	const bool solid_lines(get_work_area()->solid_lines);
	bool alternative = get_work_area()->get_alternative_mode();

	const std::list<etl::handle<Duckmatic::Bezier> >& bezier_list(get_work_area()->bezier_list());
	const std::list<handle<Duckmatic::Stroke> >& stroke_list(get_work_area()->stroke_list());
	Glib::RefPtr<Pango::Layout> layout(Pango::Layout::create(get_work_area()->get_pango_context()));

	Cairo::RefPtr<Cairo::Context> cr = drawable->create_cairo_context();

	cr->save();
	cr->set_line_cap(Cairo::LINE_CAP_BUTT);
	cr->set_line_join(Cairo::LINE_JOIN_MITER);

	// Render the strokes
	for(std::list<handle<Duckmatic::Stroke> >::const_iterator iter=stroke_list.begin();iter!=stroke_list.end();++iter)
	{
		cr->save();

		std::list<synfig::Point>::iterator iter2;
		for(iter2=(*iter)->stroke_data->begin();iter2!=(*iter)->stroke_data->end();++iter2)
		{
			cr->line_to(
				((*iter2)[0]-window_start[0])/pw,
				((*iter2)[1]-window_start[1])/ph
				);
		}

		cr->set_line_width(1.0);
		cr->set_source_rgb(
			colorconv_synfig2gdk((*iter)->color).get_red_p(),
			colorconv_synfig2gdk((*iter)->color).get_green_p(),
			colorconv_synfig2gdk((*iter)->color).get_blue_p()
			);
		cr->stroke();

		cr->restore();
	}



	// Render the beziers
	for(std::list<handle<Duckmatic::Bezier> >::const_iterator iter=bezier_list.begin();iter!=bezier_list.end();++iter)
	{
		Point p1((*iter)->p1->get_trans_point()-window_start);
		Point p2((*iter)->p2->get_trans_point()-window_start);
		Point c1((*iter)->c1->get_trans_point()-window_start);
		Point c2((*iter)->c2->get_trans_point()-window_start);
		p1[0]/=pw;p1[1]/=ph;
		p2[0]/=pw;p2[1]/=ph;
		c1[0]/=pw;c1[1]/=ph;
		c2[0]/=pw;c2[1]/=ph;

		cr->save();

		cr->move_to(p1[0], p1[1]);
		cr->curve_to(c1[0], c1[1], c2[0], c2[1], p2[0], p2[1]);

/*
		if (solid_lines)
		{
			cr->set_source_rgb(0,0,0); // DUCK_COLOR_BEZIER_1
			cr->set_line_width(3.0);
			cr->stroke_preserve();

			cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0); //DUCK_COLOR_BEZIER_2
			cr->set_line_width(1.0);
			cr->stroke();
		}
		else
*/
		{
			//Solid line background
			cr->set_line_width(1.0);
			cr->set_source_rgb(0,0,0); // DUCK_COLOR_BEZIER_1
			cr->stroke_preserve();

			//Dashes
			cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0); //DUCK_COLOR_BEZIER_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();
		}
		cr->restore();
	}


	const DuckList duck_list(get_work_area()->get_duck_list());

	std::list<ScreenDuck> screen_duck_list;
	const float radius((abs(pw)+abs(ph))*4);

	etl::handle<Duck> hover_duck(get_work_area()->find_duck(get_work_area()->get_cursor_pos(),radius, get_work_area()->get_type_mask()));

	// Render the ducks
	for(std::list<handle<Duck> >::const_iterator iter=duck_list.begin();iter!=duck_list.end();++iter)
	{

		// If this type of duck has been masked, then skip it
		if(!(*iter)->get_type() || (!(get_work_area()->get_type_mask() & (*iter)->get_type())))
			continue;

		Point sub_trans_point((*iter)->get_sub_trans_point());
		Point sub_trans_origin((*iter)->get_sub_trans_origin());

		if (App::restrict_radius_ducks &&
			(*iter)->is_radius())
		{
			if (sub_trans_point[0] < sub_trans_origin[0])
				sub_trans_point[0] = sub_trans_origin[0];
			if (sub_trans_point[1] < sub_trans_origin[1])
				sub_trans_point[1] = sub_trans_origin[1];
		}

		Point point((*iter)->get_transform_stack().perform(sub_trans_point));
		Point origin((*iter)->get_transform_stack().perform(sub_trans_origin));

		point[0]=(point[0]-window_start[0])/pw;
		point[1]=(point[1]-window_start[1])/ph;

		bool has_connect = (*iter)->get_tangent()
		                || ((*iter)->get_type()&( Duck::TYPE_ANGLE
		                					   | Duck::TYPE_SKEW
		        		                       | Duck::TYPE_SCALE_X
		        		                       | Duck::TYPE_SCALE_Y ));
		if((*iter)->get_connect_duck())
		{
			has_connect=true;
			origin=(*iter)->get_connect_duck()->get_trans_point();
		}

		origin[0]=(origin[0]-window_start[0])/pw;
		origin[1]=(origin[1]-window_start[1])/ph;

		bool selected(get_work_area()->duck_is_selected(*iter));
		bool hover(*iter==hover_duck || (*iter)->get_hover());

		if(get_work_area()->get_selected_value_node())
		{
			synfigapp::ValueDesc value_desc((*iter)->get_value_desc());
			if (value_desc.is_valid() &&
				((value_desc.is_value_node()		&& get_work_area()->get_selected_value_node() == value_desc.get_value_node()) ||
				 (value_desc.parent_is_value_node()	&& get_work_area()->get_selected_value_node() == value_desc.get_parent_value_node())))
			{
				cr->save();

				cr->rectangle(
					round_to_int(point[0]-5),
					round_to_int(point[1]-5),
					10,
					10
					);

				cr->set_line_width(2.0);
				cr->set_source_rgb(1, 0, 0); //DUCK_COLOR_SELECTED
				cr->stroke();

				cr->restore();
			}

		}

		if((*iter)->get_box_duck())
		{
			Point boxpoint((*iter)->get_box_duck()->get_trans_point());
			boxpoint[0]=(boxpoint[0]-window_start[0])/pw;
			boxpoint[1]=(boxpoint[1]-window_start[1])/ph;
			Point tl(min(point[0],boxpoint[0]),min(point[1],boxpoint[1]));

			cr->save();

			cr->rectangle(
				round_to_int(tl[0]),
				round_to_int(tl[1]),
				round_to_int(abs(boxpoint[0]-point[0])),
				round_to_int(abs(boxpoint[1]-point[1]))
				);

			// Solid white box
			cr->set_line_width(1.0);
			cr->set_source_rgb(1,1,1); //DUCK_COLOR_BOX_1
			cr->stroke_preserve();

			// Dashes
			cr->set_source_rgb(0,0,0); //DUCK_COLOR_BOX_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();

			cr->restore();
		}

		if((*iter)->is_axes_tracks())
		{
			Point pos((*iter)->get_point());
			Point points[] = {
				(*iter)->get_sub_trans_origin(),
				(*iter)->get_sub_trans_point(Point(pos[0],0)),
				(*iter)->get_sub_trans_point(),
				(*iter)->get_sub_trans_point(Point(0,pos[1])),
				(*iter)->get_sub_trans_origin()
			};

			cr->save();

			for(int i = 0; i < 5; i++) {
				Point p((*iter)->get_transform_stack().perform(points[i]));
				Real x = (p[0]-window_start[0])/pw;
				Real y = (p[1]-window_start[1])/ph;
				if (i == 0) cr->move_to(x, y); else cr->line_to(x, y);
			}

			// Solid white box
			cr->set_line_width(1.0);
			cr->set_source_rgb(1,1,1); //DUCK_COLOR_BOX_1
			cr->stroke_preserve();

			// Dashes
			cr->set_source_rgb(0,0,0); //DUCK_COLOR_BOX_2
			std::valarray<double> dashes(2);
			dashes[0]=5.0;
			dashes[1]=5.0;
			cr->set_dash(dashes, 0);
			cr->stroke();

			cr->restore();
		}

		ScreenDuck screen_duck;
		screen_duck.pos=point;
		screen_duck.selected=selected;
		screen_duck.hover=hover;
		screen_duck.has_alternative=(*iter)->get_alternative_value_desc().is_valid();

		if(!(*iter)->get_editable(alternative))
			screen_duck.color=(DUCK_COLOR_NOT_EDITABLE);
		else if((*iter)->get_tangent())
			if(0){
				// Tangents have different color depending on the split state (disabled for now)
				//
				// Check if we can reach the canvas and set the time to
				// evaluate the split value accordingly
				synfig::Canvas::Handle canvas_h(get_work_area()->get_canvas());
				synfig::Time time(canvas_h?canvas_h->get_time():synfig::Time(0));
				// Retrieve the split value of the bline point.
				const synfigapp::ValueDesc& v_d((*iter)->get_value_desc());
				synfig::LinkableValueNode::Handle parent;
				if(v_d.parent_is_linkable_value_node())
				{
					parent=v_d.get_parent_value_node();
					bool split;
					synfig::ValueNode::Handle child(parent->get_link("split"));
					if(synfig::ValueNode_Animated::Handle::cast_dynamic(child))
					{
						synfig::ValueNode_Animated::Handle animated_child(synfig::ValueNode_Animated::Handle::cast_dynamic(child));
						split=animated_child->new_waypoint_at_time(time).get_value(time).get(split);
					}
					else if(synfig::ValueNode_Const::Handle::cast_dynamic(child))
					{
						synfig::ValueNode_Const::Handle const_child(synfig::ValueNode_Const::Handle::cast_dynamic(child));
						split=(const_child->get_value()).get(split);
					}
					screen_duck.color=(split? DUCK_COLOR_TANGENT_2 : DUCK_COLOR_TANGENT_1);
				}
				else
					screen_duck.color=DUCK_COLOR_TANGENT_1;
			} else {
				// All tangents are the same color
				screen_duck.color=((*iter)->get_scalar()<0 ? DUCK_COLOR_TANGENT_1 : DUCK_COLOR_TANGENT_1);
			}
		else if((*iter)->get_type()&Duck::TYPE_VERTEX)
			screen_duck.color=DUCK_COLOR_VERTEX;
		else if((*iter)->get_type()&Duck::TYPE_RADIUS)
			screen_duck.color=((*iter)->is_linear() ? DUCK_COLOR_LINEAR : DUCK_COLOR_RADIUS);
		else if((*iter)->get_type()&Duck::TYPE_WIDTH)
			screen_duck.color=DUCK_COLOR_WIDTH;
		else if((*iter)->get_type()&Duck::TYPE_ANGLE)
			screen_duck.color=(DUCK_COLOR_ANGLE);
		else if((*iter)->get_type()&Duck::TYPE_WIDTHPOINT_POSITION)
			screen_duck.color=(DUCK_COLOR_WIDTHPOINT_POSITION);
		else
			screen_duck.color=DUCK_COLOR_OTHER;

		screen_duck_list.push_front(screen_duck);

		if(has_connect)
		{
			cr->save();

			cr->move_to(origin[0], origin[1]);
			cr->line_to(point[0], point[1]);

			if(solid_lines)
			{
				// Outside
				cr->set_line_width(3.0);
				cr->set_source_rgb(0,0,0); //DUCK_COLOR_CONNECT_OUTSIDE
				cr->stroke_preserve();

				// Inside
				cr->set_line_width(1.0);
				cr->set_source_rgb(159.0/255,239.0/255,239.0/255); //DUCK_COLOR_CONNECT_INSIDE
				cr->stroke();
			}
			else
			{
				// White background
				cr->set_line_width(1.0);
				cr->set_source_rgb(0,0,0); //DUCK_COLOR_CONNECT_OUTSIDE
				cr->stroke_preserve();

				// Dashes on top of the background
				cr->set_source_rgb(159.0/255,239.0/255,239.0/255); //DUCK_COLOR_CONNECT_INSIDE
				std::valarray<double> dashes(2);
				dashes[0]=5.0;
				dashes[1]=5.0;
				cr->set_dash(dashes, 0);
				cr->stroke();
			}

			cr->restore();
		}

		if((*iter)->is_radius())
		{
			if (!(*iter)->is_linear())
			{
				const Real mag((point-origin).mag());

				cr->save();

				cr->arc(
					origin[0],
					origin[1],
					mag,
					0,
					M_PI*2
					);

				if(solid_lines)
				{
					cr->set_line_width(3.0);
					cr->set_source_rgb(0,0,0);
					cr->stroke_preserve();

					cr->set_source_rgb(175.0/255.0,175.0/255.0,175.0/255.0);
				}
				else
				{
					cr->set_source_rgb(1.0,1.0,1.0);

					// Operator difference was added in Cairo 1.9.4
					// It currently isn't supported by Cairomm
	#if CAIRO_VERSION >= 10904
					cairo_set_operator(cr->cobj(), CAIRO_OPERATOR_DIFFERENCE);
	#else
					// Fallback: set color to black
					cr->set_source_rgb(0,0,0);
	#endif

				}

				cr->set_line_width(1.0);
				cr->stroke();

				cr->restore();
			}

			if(hover)
			{
				Real mag;
				if ((*iter)->get_exponential()){
					mag = log((*iter)->get_point().mag());
				}
				else if (App::restrict_radius_ducks)
				{
					Point sub_trans_point((*iter)->get_sub_trans_point());
					Point sub_trans_origin((*iter)->get_sub_trans_origin());

					if (sub_trans_point[0] < sub_trans_origin[0])
						sub_trans_point[0] = sub_trans_origin[0];
					if (sub_trans_point[1] < sub_trans_origin[1])
						sub_trans_point[1] = sub_trans_origin[1];

					Point point((*iter)->get_transform_stack().perform(sub_trans_point));
					Point origin((*iter)->get_transform_stack().perform(sub_trans_origin));

					mag = (point-origin).mag();
				}
				else
					mag = ((*iter)->get_trans_point()-(*iter)->get_trans_origin()).mag();

				Distance real_mag(mag, Distance::SYSTEM_UNITS);
				if (!(*iter)->get_exponential())
					real_mag.convert(App::distance_system,get_work_area()->get_rend_desc());

				cr->save();

				layout->set_text(real_mag.get_string());

				cr->set_source_rgb(0,0,0); // DUCK_COLOR_WIDTH_TEXT_1
				cr->move_to(
					point[0]+1+6,
					point[1]+1-8
					);
				layout->show_in_cairo_context(cr);
				cr->stroke();


				cr->set_source_rgb(1,0,1); // DUCK_COLOR_WIDTH_TEXT_2
				cr->move_to(
					point[0]+6,
					point[1]-8
					);
				layout->show_in_cairo_context(cr);
				cr->stroke();

				cr->restore();
			}

		}

		if((*iter)->get_type()&&Duck::TYPE_WIDTHPOINT_POSITION)
		{
			if(hover)
			{
				synfig::Canvas::Handle canvas_h(get_work_area()->get_canvas());
				synfig::Time time(canvas_h?canvas_h->get_time():synfig::Time(0));
				synfigapp::ValueDesc value_desc((*iter)->get_value_desc());
				synfig::ValueNode_WPList::Handle wplist=NULL;
				ValueNode_Composite::Handle wpoint_composite=NULL;
				Real radius=0.0;
				Real new_value;
				Point p(sub_trans_point-sub_trans_origin);
				if(value_desc.parent_is_value_node())
					wplist=synfig::ValueNode_WPList::Handle::cast_dynamic(value_desc.get_parent_value_node());
				if(wplist)
				{
					bool wplistloop(wplist->get_loop());
					synfig::ValueNode_BLine::Handle bline(synfig::ValueNode_BLine::Handle::cast_dynamic(wplist->get_bline()));
					wpoint_composite=ValueNode_Composite::Handle::cast_dynamic(value_desc.get_value_node());
					if(bline && wpoint_composite)
					{
						bool blineloop(bline->get_loop());
						bool homogeneous=false;
						// Retrieve the homogeneous layer parameter
						std::set<Node*>::iterator iter;
						for(iter=wplist->parent_set.begin();iter!=wplist->parent_set.end();++iter)
							{
								Layer::Handle layer;
								layer=Layer::Handle::cast_dynamic(*iter);
								if(layer && layer->get_name() == "advanced_outline")
								{
									homogeneous=layer->get_param("homogeneous").get(bool());
									break;
								}
							}
						WidthPoint wp((*wpoint_composite)(time).get(WidthPoint()));
						if(wplistloop)
						{
							// The wplist is looped. This may require a position parameter
							// outside the range of 0-1, so make sure that the position doesn't
							// change drastically.
							// First normalise the current position
							Real value_old(wp.get_norm_position(wplistloop));
							Real value_old_b(wp.get_bound_position(wplistloop));
							// If it is homogeneous then convert it to standard
							value_old=homogeneous?hom_to_std((*bline)(time), value_old, wplistloop, blineloop):value_old;
							// grab a new position given by duck's position on the bline
							Real value_new = synfig::find_closest_point((*bline)(time), p , radius, blineloop);
							// calculate the difference between old and new positions
							Real difference = fmod( fmod(value_new - value_old, 1.0) + 1.0 , 1.0);
							//fmod is called twice to avoid negative values
							if (difference > 0.5)
								difference=difference-1.0;
							// calculate a new value for the position
							new_value=value_old+difference;
							// restore the homogeneous value if needed
							new_value = homogeneous?std_to_hom((*bline)(time), new_value, wplistloop, blineloop):new_value;
							// this is the difference between the new value and the old value inside the boundaries
							Real bound_diff((wp.get_lower_bound() + new_value*(wp.get_upper_bound()-wp.get_lower_bound()))-value_old_b);
							// add the new diff to the current value
							new_value = wp.get_position() + bound_diff;
						}
						else
						{
							// grab a new position given by duck's position on the bline
							new_value = synfig::find_closest_point((*bline)(time), p , radius, blineloop);
							// if it is homogeneous then convert to it
							new_value=homogeneous?std_to_hom((*bline)(time), new_value, wplistloop, blineloop):new_value;
							// convert the value inside the boundaries
							new_value = wp.get_lower_bound()+new_value*(wp.get_upper_bound()-wp.get_lower_bound());
						}
						cr->save();
						layout->set_text(strprintf("%2.3f", new_value));

						cr->set_source_rgb(0,0,0); // DUCK_COLOR_WIDTH_TEXT_1
						cr->move_to(
							point[0]+1+6,
							point[1]+1-18
							);
						layout->show_in_cairo_context(cr);
						cr->stroke();


						cr->set_source_rgb(1,0,1); // DUCK_COLOR_WIDTH_TEXT_2
						cr->move_to(
							point[0]+6,
							point[1]-18
							);
						layout->show_in_cairo_context(cr);
						cr->stroke();

						cr->restore();
					}
				}
			}
		}

	}

	for(;screen_duck_list.size();screen_duck_list.pop_front())
	{
		Gdk::Color color(screen_duck_list.front().color);
		double radius = 4;
		double outline = 1;
		bool duck_alternative = alternative && screen_duck_list.front().has_alternative;

		// Draw the hovered duck last (on top of everything)
		if(screen_duck_list.front().hover && !screen_duck_list.back().hover && screen_duck_list.size()>1)
		{
			screen_duck_list.push_back(screen_duck_list.front());
			continue;
		}

		cr->save();

		if(!screen_duck_list.front().selected)
		{
			color.set_red(color.get_red()*2/3);
			color.set_green(color.get_green()*2/3);
			color.set_blue(color.get_blue()*2/3);
		}

		if(screen_duck_list.front().hover)
		{
			radius += 1;
			outline += 1;
		}

		cr->arc(
			screen_duck_list.front().pos[0],
			screen_duck_list.front().pos[1],
			radius,
			0,
			M_PI*2
			);

		cr->set_source_rgba(
			color.get_red_p(),
			color.get_green_p(),
			color.get_blue_p(),
			duck_alternative ? 0.5 : 1.0
			);
		cr->fill_preserve();

		cr->set_line_width(outline);
		cr->set_source_rgba(0,0,0,1); //DUCK_COLOR_OUTLINE
		cr->stroke();

		cr->restore();
	}
}
Exemplo n.º 25
0
void FrequencyGraph( Cairo::RefPtr<Cairo::Context> cr, bool active, float x, float y, float xS, float yS, EqualizerState state)
{
    cr->set_line_cap( Cairo::LINE_CAP_ROUND );
    cr->set_line_join( Cairo::LINE_JOIN_ROUND);

    int xSize = xS;
    int ySize = yS;

    // works but a bit simple
    cr -> move_to( x        , y         );
    cr -> line_to( x + xSize, y         );
    cr -> line_to( x + xSize, y + ySize );
    cr -> line_to( x        , y + ySize );
    cr -> close_path();

    // Draw outline shape
    cr -> set_source_rgb (0.1,0.1,0.1);
    cr -> fill();

    // draw "frequency guides"
    std::valarray< double > dashes(2);
    dashes[0] = 2.0;
    dashes[1] = 2.0;
    cr->set_dash (dashes, 0.0);
    cr->set_line_width(1.0);
    cr->set_source_rgb (0.4,0.4,0.4);
    for ( int i = 0; i < 4; i++ )
    {
        cr->move_to( x + ((xSize / 4.f)*i), y );
        cr->line_to( x + ((xSize / 4.f)*i), y + ySize );
    }
    for ( int i = 0; i < 4; i++ )
    {
        cr->move_to( x       , y + ((ySize / 4.f)*i) );
        cr->line_to( x +xSize, y + ((ySize / 4.f)*i) );
    }
    cr->stroke();
    cr->unset_dash();

    // set colour based on active or not
    if ( active )
        setColour(cr, COLOUR_BLUE_1, 0.2 );
    else
        setColour(cr, COLOUR_GREY_1, 0.2 );

    int tmpX = x;
    int tmpY = y;

    // precalculate some variables
    float oldGainPix = (ySize / 60.f) * (state.gain[0] - 0.5 ) * 40;
    float oldXLoc = 0;
    float qPix = ((xSize * 0.2) / 3.f );
    //float oldCutoff = 0;

    // move to bottom left, draw line to middle left
    cr->move_to( tmpX, tmpY + ySize         );
    cr->line_to( tmpX, tmpY + (ySize * 0.5) - oldGainPix );


    for ( int i = 0; i < 4; i++ )
    {
        //float cutoff = state.cutoffFreq[i] / 20000;


        float gainPix = (ySize / 60.f) * (state.gain[i] - 0.5 ) * 40;

        float xLoc = xSize * 0.2 * (i+1);

        //std::cout << "I: " << i << "  GainPix: " << gainPix << "  tmpY - gainPix" << tmpY - gainPix << std::endl;


        cr->curve_to( tmpX + oldXLoc + qPix, tmpY + (ySize * 0.5) - oldGainPix ,// control point 1
                      tmpX + xLoc - qPix   , tmpY + (ySize * 0.5) - gainPix ,   // control point 2
                      tmpX + xLoc          , tmpY + (ySize * 0.5) - gainPix );  // end of curve

        // update variables for next iter
        oldGainPix = gainPix;
        oldXLoc = xLoc;
        //oldCutoff = cutoff;
    }

    // last bit of curve to the right edge
    cr->curve_to( tmpX + oldXLoc + qPix, tmpY + (ySize * 0.5) - oldGainPix,   // control point 1
                  tmpX + xSize   - qPix, tmpY + (ySize * 0.5) - oldGainPix,   // control point 2
                  tmpX + xSize         , tmpY + (ySize * 0.5) - oldGainPix);  // end of curve


    cr->line_to( tmpX + xSize , tmpY + ySize );
    cr->close_path();
    cr->fill_preserve();

    cr->set_line_width(2.5);
    if ( active )
        setColour(cr, COLOUR_BLUE_1 );
    else
        setColour(cr, COLOUR_GREY_1 );
    cr->stroke();

    // outline
    cr->rectangle( x, y , xS, yS );
    cr->set_line_width(3);
    if ( active )
        setColour(cr, COLOUR_GREY_2 );
    else
        setColour(cr, COLOUR_GREY_3 );
    cr->stroke();

    //std::cout << "LupppWidget::FrequencyGraph() called!" << std::endl;
}
Exemplo n.º 26
0
bool ClockDrawArea::on_draw(const Cairo::RefPtr<Cairo::Context>& context){
	//Get the drawing area
	auto allocation = get_allocation();
	const int width = allocation.get_width();
	const int height = allocation.get_height();

	//Set the scale to a unit square
	context->scale(width, height);

	//Set (0.5, 0.5) to (0, 0). convenient to draw with arc.
	context->translate(0.5, 0.5);

	//Paint the background of the window;
	context->save();
	context->set_source_rgba(0.337, 0.612, 0.117, 0.9);
	context->paint();
	context->restore();

	//Draw the outer edge of the clock
	context->set_line_width(3 * m_LineWidth);
	context->arc(0, 0, m_Radius, 0, 2 * M_PI);

	//Paint the background color of the clock
	context->save();
	context->set_source_rgba(1.0, 1.0, 1.0, 0.8);
	context->fill_preserve();
	context->restore();

	//Draw a center point for good looking
	context->stroke();
	context->arc(0, 0, 0.05 * m_Radius, 0, 2 * M_PI);
	context->stroke();

	//Draw ticks
	context->save();
	double l = 1;

	for(int i = 0; i <= 11; i++){

		if((i % 3) == 0) {
			l = m_Radius * 0.8;
		}else{
			l = m_Radius * 0.9;
		}

		context->move_to(l * cos(i * 2* M_PI /12), l * sin(i * 2 * M_PI /12));
		context->line_to(m_Radius * cos(i * 2 * M_PI /12), m_Radius * sin(i * 2 * M_PI /12));

	}
	context->stroke();
	context->restore();

	//Get the current time from system and save info to a timeinfo struct
	time_t rawTime;
	time(&rawTime);

	struct tm * timeinfo = localtime(&rawTime);

	//Calculate the angle of hands of the clock
	auto radSeconds = (timeinfo->tm_sec * 2 * M_PI /60) - M_PI/2;
	auto radMinutes = (timeinfo->tm_min * 2 * M_PI /60) - M_PI/2;
	auto radHours = (timeinfo->tm_hour * 2 * M_PI /12) - M_PI/2  + timeinfo->tm_min * 2 * M_PI /(60 * 12);

	//Draw the hands of the clock
	context->save();

	//The hand of seconds
	context->set_source_rgba(0.823, 0.322, 0.155, 0.9);
	context->set_line_width(m_LineWidth);
	l = 0.9 * m_Radius;
	context->move_to(0,0);
	context->line_to(l * cos(radSeconds), l * sin(radSeconds));
	context->stroke();

	//The hand of minutes
	context->set_source_rgba(0.632, 0.802, 0.266, 0.9);
	context->set_line_width(2 * m_LineWidth);
	l = 0.8 * m_Radius;
	context->move_to(0,0);
	context->line_to(l * cos(radMinutes), l * sin(radMinutes));
	context->stroke();

	//The hand of hours
	context->set_source_rgba(0.104, 0.582, 0.723, 0.9);
	context->set_line_width(3 * m_LineWidth);
	l = 0.65 * m_Radius;
	context->move_to(0,0);
	context->line_to(l * cos(radHours), l * sin(radHours));
	context->stroke();

	context->restore();


	return true;
}
Exemplo n.º 27
0
void MyWidget::drawWidget()
{
    Painter p(this);

    if (m_color) {
        p.setSourceRGB(1.0, 0, 0);
    } else {
        p.setSourceRGB(0, 0, 0);
    }

    p.translate(minimumSize().width() / 2.0, minimumSize().height() / 2.0);
    p.setLineWidth(m_lineWidth);
    p.arc(0, 0, m_radius, 0, 2 * M_PI);
    p.save();

    p.setSourceRGBA(1.0, 1.0, 1.0, 0.8);
    p.fillPreserve();
    p.restore();
    p.strokePreserve();
    p.clip();

    for (int i = 0; i < 12; ++i) {
        double inset = 30;

        p.save();
        p.setLineCap(Painter::RoundLineCap);

        if(i % 3 != 0) {
            inset *= 0.8;
            p.setLineWidth(1.0);
        }

        p.moveTo((m_radius - inset) * cos (i * M_PI / 6.0),
                 (m_radius - inset) * sin (i * M_PI / 6.0));
        p.lineTo(m_radius * cos (i * M_PI / 6.0),
                 m_radius * sin (i * M_PI / 6.0));
        p.stroke();
        p.restore();
    }

    // store the current time
    time_t rawtime;
    time(&rawtime);
    struct tm * timeinfo = localtime (&rawtime);

    // compute the angles of the indicators of our clock
    double minutes = timeinfo->tm_min * M_PI / 30;
    double hours = timeinfo->tm_hour * M_PI / 6;
    double seconds= timeinfo->tm_sec * M_PI / 30;

    p.save();
    p.setLineCap(Painter::RoundLineCap);

    // draw the seconds hand
    p.save();
    p.setLineWidth(m_lineWidth);
    p.setSourceRGBA(0.7, 0.7, 0.7, 0.8);
    p.moveTo(0, 0);
    p.lineTo(sin(seconds) * (m_radius * 0.9),
             -cos(seconds) * (m_radius * 0.9));
    p.stroke();
    p.restore();

    // draw the minutes hand
    p.setSourceRGBA(0.117, 0.337, 0.612, 0.9);
    p.moveTo(0, 0);
    p.lineTo(sin(minutes + seconds / 60.0) * (m_radius * 0.8),
             -cos(minutes + seconds / 60.0) * (m_radius * 0.8));
    p.stroke();

    // draw the hours hand
    p.setSourceRGBA(0.337, 0.612, 0.117, 0.9);
    p.moveTo(0, 0);
    p.lineTo(sin(hours + minutes / 12.0) * (m_radius * 0.5),
             -cos(hours + minutes / 12.0) * (m_radius * 0.5));
    p.stroke();
    p.restore();

    p.setSourceRGBA(1, 0, 0, 0.5);
    p.arc(0, 0, m_lineWidth * 2.0, 0, 2.0 * M_PI);
    p.fill();

#if 0
  // This is where we draw on the window
  Glib::RefPtr<Gdk::Window> window = get_window();
  if(window)
  {
    Gtk::Allocation allocation = get_allocation();
    const int width = allocation.get_width();
    const int height = allocation.get_height();

    Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();

    if(event)
    {
        // clip to the area indicated by the expose event so that we only
        // redraw the portion of the window that needs to be redrawn
        cr->rectangle(event->area.x, event->area.y,
                event->area.width, event->area.height);
        cr->clip();
    }

    // background gradient
    {
        Cairo::RefPtr<Cairo::LinearGradient> pat = Cairo::LinearGradient::create(0.0, 0.0, 0.0, height);
        pat->add_color_stop_rgb(1.0, 1.0, 1.0, 1.0);
        pat->add_color_stop_rgb(0.0, 0.0, 0.0, 0.0);
        cr->rectangle(0, 0, width, height);
        cr->set_source(pat);
        cr->fill();
    }

    // scale to unit square and translate (0, 0) to be (0.5, 0.5), i.e.
    // the center of the window
    cr->scale(width, height);
    cr->translate(0.5, 0.5);
    cr->set_line_width(m_line_width);

    cr->arc(0, 0, m_radius, 0, 2 * M_PI);
    cr->save();
    cr->set_source_rgba(1.0, 1.0, 1.0, 0.8);
    cr->fill_preserve();
    cr->restore();
    cr->stroke_preserve();
    cr->clip();

    //clock ticks
    for (int i = 0; i < 12; i++)
    {
        double inset = 0.05;

        cr->save();
        cr->set_line_cap(Cairo::LINE_CAP_ROUND);

        if(i % 3 != 0)
        {
            inset *= 0.8;
            cr->set_line_width(0.03);
        }

        cr->move_to(
                (m_radius - inset) * cos (i * M_PI / 6),
                (m_radius - inset) * sin (i * M_PI / 6));
        cr->line_to (
                m_radius * cos (i * M_PI / 6),
                m_radius * sin (i * M_PI / 6));
        cr->stroke();
        cr->restore(); /* stack-pen-size */
    }

    // store the current time
    time_t rawtime;
    time(&rawtime);
    struct tm * timeinfo = localtime (&rawtime);

    // compute the angles of the indicators of our clock
    double minutes = timeinfo->tm_min * M_PI / 30;
    double hours = timeinfo->tm_hour * M_PI / 6;
    double seconds= timeinfo->tm_sec * M_PI / 30;

    cr->save();
    cr->set_line_cap(Cairo::LINE_CAP_ROUND);

    // draw the seconds hand
    cr->save();
    cr->set_line_width(m_line_width / 3);
    cr->set_source_rgba(0.7, 0.7, 0.7, 0.8); // gray
    cr->move_to(0, 0);
    cr->line_to(sin(seconds) * (m_radius * 0.9), 
            -cos(seconds) * (m_radius * 0.9));
    cr->stroke();
    cr->restore();

    // draw the minutes hand
    cr->set_source_rgba(0.117, 0.337, 0.612, 0.9);   // blue
    cr->move_to(0, 0);
    cr->line_to(sin(minutes + seconds / 60) * (m_radius * 0.8),
            -cos(minutes + seconds / 60) * (m_radius * 0.8));
    cr->stroke();

    // draw the hours hand
    cr->set_source_rgba(0.337, 0.612, 0.117, 0.9);   // green
    cr->move_to(0, 0);
    cr->line_to(sin(hours + minutes / 12.0) * (m_radius * 0.5),
            -cos(hours + minutes / 12.0) * (m_radius * 0.5));
    cr->stroke();
    cr->restore();

    // draw a little dot in the middle
    cr->arc(0, 0, m_line_width / 3.0, 0, 2 * M_PI);
    cr->fill();
  }
#endif
}
Exemplo n.º 28
0
bool GHighPass::on_expose_event(GdkEventExpose* event)
{
  // This is where we draw on the window
  Glib::RefPtr<Gdk::Window> window = get_window();
  
  if(window)    // Only run if Window does exist
  {
    Gtk::Allocation allocation = get_allocation();
    int width = allocation.get_width();
    int height = allocation.get_height();
    
    // clip to the area indicated by the expose event so that we only redraw
    // the portion of the window that needs to be redrawn
    Cairo::RefPtr<Cairo::Context> cr = window->create_cairo_context();
    cr->rectangle(event->area.x, event->area.y,
            event->area.width, event->area.height);
    cr->clip();
    
    cr->rectangle(event->area.x, event->area.y,
        event->area.width, event->area.height);
    setColour(cr, COLOUR_GREY_3 );
    cr->fill();
    
    //cout << "HighPass getting state ID " << ID << endl; 
    float cutoffRangeZeroOne = stateStore->effectState.at(ID).values[0];
    
    cutoff = cutoffRangeZeroOne;
    
    bool active = stateStore->effectState.at(ID).active;
    bool globalUnit = stateStore->effectState.at(ID).globalUnit;
    
    int x = 0;
    int y = 0;
    xSize = 73;
    ySize = 37;
    
    // works but a bit simple
    cr -> move_to( x        , y         );
    cr -> line_to( x + xSize, y         );
    cr -> line_to( x + xSize, y + ySize );
    cr -> line_to( x        , y + ySize );
    cr -> close_path();
    
    // Draw outline shape
    cr -> set_source_rgb (0.1,0.1,0.1);
    cr -> fill();
    
    // draw "frequency guides"
    std::valarray< double > dashes(2);
    dashes[0] = 2.0;
    dashes[1] = 2.0;
    cr->set_dash (dashes, 0.0);
    cr->set_line_width(1.0);
    cr->set_source_rgb (0.4,0.4,0.4);
    for ( int i = 0; i < 3; i++ )
    {
      cr->move_to( x + ((xSize / 3.f)*i), y );
      cr->line_to( x + ((xSize / 3.f)*i), y + ySize );
    }
    for ( int i = 0; i < 3; i++ )
    {
      cr->move_to( x       , y + ((ySize / 3.f)*i) );
      cr->line_to( x +xSize, y + ((ySize / 3.f)*i) );
    }
    cr->stroke();
    cr->unset_dash();
    
    // move to bottom left, draw line to middle left
    cr->move_to( x + xSize-2 , y + ySize );
    cr->line_to( x + xSize-2 , y + (ySize/2));
    
    
    int startHorizontalLine = xSize* (cutoff + 0.4);
    if ( startHorizontalLine > 75 )
      startHorizontalLine = 75;
      
    cr->line_to( startHorizontalLine, y + (ySize/2) ); // horizontal line to start of curve
    
    int xSize1CP1 = xSize* (cutoff +0.1);
    int xSize1CP2 = xSize* (cutoff +0.08);
    int xSize1End = xSize* cutoff;
    
    if ( xSize1CP1 > 75 )
      xSize1CP1 = 75;
    if ( xSize1CP2 > 75 )
      xSize1CP2 = 75;
    if ( xSize1End > 75 )
      xSize1End = 75;
    
    cr->curve_to( xSize1CP1, y+(ySize*0.5),   // control point 1
                  xSize1CP2, y+(ySize*0.3),   // control point 2
                  xSize1End, y+(ySize*0.3));  // end of curve 1, start curve 2
    
    int xSize2CP1 = xSize* (cutoff - 0.03);
    int xSize2CP2 = xSize* (cutoff - 0.08);
    int xSize2End = xSize* (cutoff - 0.15);
    
    if ( xSize2CP1 > 75 )
      xSize2CP1 = 75;
    if ( xSize2CP2 > 75 )
      xSize2CP2 = 75;
    if ( xSize2End > 75 )
      xSize2End = 75;
    
    cr->curve_to( xSize2CP1, y+(ySize*0.3),  // control point 1
                  xSize2CP2, y+(ySize*0.3), // control point 2
                  xSize2End, y+(ySize)   ); // end of curve on floor
    
    if (active)
      setColour(cr, COLOUR_BLUE_1, 0.2 );
    else
      setColour(cr, COLOUR_GREY_1, 0.2 );
    cr->close_path();
    cr->fill_preserve();
    
    // stroke cutoff line
    cr->set_line_width(2.5);
    if ( active )
      setColour(cr, COLOUR_BLUE_1 );
    else
      setColour(cr, COLOUR_GREY_1 );
    cr->stroke();
    
    // click center
    if ( globalUnit )
    {
      if ( active )
        setColour(cr, COLOUR_GREEN_1, 0.9 );
      else
        setColour(cr, COLOUR_GREY_1,0.9 );
      cr->move_to( xSize * cutoff - 5, ySize*q - 5 );
      cr->line_to( xSize * cutoff + 5, ySize*q + 5 );
      cr->move_to( xSize * cutoff - 5, ySize*q + 5 );
      cr->line_to( xSize * cutoff + 5, ySize*q - 5 );
      cr->stroke();
    }
    else
    {
      if ( active )
        setColour(cr, COLOUR_ORANGE_1, 0.9 );
      else
        setColour(cr, COLOUR_GREY_1, 0.9 );
      cr->arc( xSize*cutoff, ySize*q, 7, 0, 6.2830 );
      cr->stroke();
    }
    
    // dials
    Dial(cr, active, 70, 140, cutoffRangeZeroOne, DIAL_MODE_NORMAL);
    Dial(cr, active, 150,140, q                 , DIAL_MODE_NORMAL);
    
    // outline
    setColour(cr, COLOUR_GREY_3 );
    cr->rectangle( x, y , xSize, ySize );
    cr->set_line_width(3);
    
    setColour(cr, COLOUR_GREY_2 );
    cr->stroke();
    
    /*
    if ( state.selected )
    {
      cr->rectangle(0, 0, 74, 216);
      setColour( cr, COLOUR_PURPLE_1 );
      cr->set_line_width(1);
      cr->stroke();
    }
    */
    
  }
  return true;
}