/**
3.1 Create a skeletonization of the segmentation and try to find a nice cut
3.1.1 Call a ipSegmentation algorithm to create a nice cut
3.1.2 Set the result of this algorithm as the feedback contour
*/
bool mitk::RegionGrowingTool::OnMousePressedInside(Action* itkNotUsed( action ), const StateEvent* stateEvent, mitkIpPicDescriptor* workingPicSlice, int initialWorkingOffset)
{
const PositionEvent* positionEvent = dynamic_cast<const PositionEvent*>(stateEvent->GetEvent()); // checked in OnMousePressed
// 3.1.1. Create a skeletonization of the segmentation and try to find a nice cut
// apply the skeletonization-and-cut algorithm
// generate contour to remove
// set m_ReferenceSlice = NULL so nothing will happen during mouse move
// remember to fill the contour with 0 in mouserelease
mitkIpPicDescriptor* segmentationHistory = ipMITKSegmentationCreateGrowerHistory( workingPicSlice, m_LastWorkingSeed, NULL ); // free again
if (segmentationHistory)
{
tCutResult cutContour = ipMITKSegmentationGetCutPoints( workingPicSlice, segmentationHistory, initialWorkingOffset ); // tCutResult is a ipSegmentation type
mitkIpPicFree( segmentationHistory );
if (cutContour.cutIt)
{
// 3.1.2 copy point from float* to mitk::Contour
Contour::Pointer contourInImageIndexCoordinates = Contour::New();
contourInImageIndexCoordinates->Initialize();
Point3D newPoint;
for (int index = 0; index < cutContour.deleteSize; ++index)
{
newPoint[0] = cutContour.deleteCurve[ 2 * index + 0 ];
newPoint[1] = cutContour.deleteCurve[ 2 * index + 1 ];
newPoint[2] = 0.0;
contourInImageIndexCoordinates->AddVertex( newPoint - 0.5 );
}
free(cutContour.traceline);
free(cutContour.deleteCurve); // perhaps visualize this for fun?
free(cutContour.onGradient);
Contour::Pointer contourInWorldCoordinates = FeedbackContourTool::BackProjectContourFrom2DSlice( m_WorkingSlice->GetGeometry(), contourInImageIndexCoordinates, true ); // true: sub 0.5 for ipSegmentation correction
FeedbackContourTool::SetFeedbackContour( *contourInWorldCoordinates );
FeedbackContourTool::SetFeedbackContourVisible(true);
mitk::RenderingManager::GetInstance()->RequestUpdate( positionEvent->GetSender()->GetRenderWindow() );
m_FillFeedbackContour = true;
}
else
{
m_FillFeedbackContour = false;
}
}
else
{
m_FillFeedbackContour = false;
}
m_ReferenceSlice = NULL;
return true;
}
/**
If the feedback contour should be filled, then it is done here. (Contour is NOT filled, when skeletonization is done but no nice cut was found)
*/
bool mitk::RegionGrowingTool::OnMouseReleased(Action* action, const StateEvent* stateEvent)
{
if ( FeedbackContourTool::CanHandleEvent(stateEvent) > 0.0 )
{
// 1. If we have a working slice, use the contour to fill a new piece on segmentation on it (or erase a piece that was selected by ipMITKSegmentationGetCutPoints)
if ( m_WorkingSlice.IsNotNull() && m_OriginalPicSlice )
{
const PositionEvent* positionEvent = dynamic_cast<const PositionEvent*>(stateEvent->GetEvent());
if (positionEvent)
{
// remember parameters for next time
m_InitialLowerThreshold = m_LowerThreshold;
m_InitialUpperThreshold = m_UpperThreshold;
if (m_FillFeedbackContour)
{
// 3. use contour to fill a region in our working slice
Contour* feedbackContour( FeedbackContourTool::GetFeedbackContour() );
if (feedbackContour)
{
Contour::Pointer projectedContour = FeedbackContourTool::ProjectContourTo2DSlice( m_WorkingSlice, feedbackContour, false, false ); // false: don't add any 0.5
// false: don't constrain the contour to the image's inside
if (projectedContour.IsNotNull())
{
FeedbackContourTool::FillContourInSlice( projectedContour, m_WorkingSlice, m_PaintingPixelValue );
const PlaneGeometry* planeGeometry( dynamic_cast<const PlaneGeometry*> (positionEvent->GetSender()->GetCurrentWorldGeometry2D() ) );
//MITK_DEBUG << "OnMouseReleased: writing back to dimension " << affectedDimension << ", slice " << affectedSlice << " in working image" << std::endl;
// 4. write working slice back into image volume
this->WriteBackSegmentationResult(positionEvent, m_WorkingSlice);
}
}
}
FeedbackContourTool::SetFeedbackContourVisible(false);
mitk::RenderingManager::GetInstance()->RequestUpdate( positionEvent->GetSender()->GetRenderWindow() );
}
}
}
m_ReferenceSlice = NULL; // don't leak
m_WorkingSlice = NULL;
m_OriginalPicSlice = NULL;
return true;
}
bool mitk::SetRegionTool::OnMouseReleased(Action* action, const StateEvent* stateEvent)
{
// 1. Hide the feedback contour, find out which slice the user clicked, find out which slice of the toolmanager's working image corresponds to that
FeedbackContourTool::SetFeedbackContourVisible(false);
const PositionEvent* positionEvent = dynamic_cast<const PositionEvent*>(stateEvent->GetEvent());
if (!positionEvent) return false;
assert( positionEvent->GetSender()->GetRenderWindow() );
mitk::RenderingManager::GetInstance()->RequestUpdate(positionEvent->GetSender()->GetRenderWindow());
if (!m_FillContour && !m_StatusFillWholeSlice) return true;
if ( FeedbackContourTool::CanHandleEvent(stateEvent) < 1.0 ) return false;
DataNode* workingNode( m_ToolManager->GetWorkingData(0) );
if (!workingNode) return false;
Image* image = dynamic_cast<Image*>(workingNode->GetData());
const PlaneGeometry* planeGeometry( dynamic_cast<const PlaneGeometry*> (positionEvent->GetSender()->GetCurrentWorldGeometry2D() ) );
if ( !image || !planeGeometry ) return false;
Image::Pointer slice = FeedbackContourTool::GetAffectedImageSliceAs2DImage( positionEvent, image );
if ( slice.IsNull() )
{
MITK_ERROR << "Unable to extract slice." << std::endl;
return false;
}
Contour* feedbackContour( FeedbackContourTool::GetFeedbackContour() );
Contour::Pointer projectedContour = FeedbackContourTool::ProjectContourTo2DSlice( slice, feedbackContour, false, false ); // false: don't add 0.5 (done by FillContourInSlice)
// false: don't constrain the contour to the image's inside
if (projectedContour.IsNull()) return false;
FeedbackContourTool::FillContourInSlice( projectedContour, slice, m_PaintingPixelValue );
this->WriteBackSegmentationResult(positionEvent, slice);
m_WholeImageContourInWorldCoordinates = NULL;
m_SegmentationContourInWorldCoordinates = NULL;
return true;
}
void mitk::CorrectorAlgorithm::TobiasHeimannCorrectionAlgorithm(mitkIpPicDescriptor* pic)
{
/*!
Some documentation (not by the original author)
TobiasHeimannCorrectionAlgorithm will be called, when the user has finished drawing a freehand line.
There should be different results, depending on the line's properties:
1. Without any prior segmentation, the start point and the end point of the drawn line will be
connected to a contour and the area enclosed by the contour will be marked as segmentation.
2. When the whole line is inside a segmentation, start and end point will be connected to
a contour and the area of this contour will be subtracted from the segmentation.
3. When the line starts inside a segmentation and ends outside with only a single
transition from segmentation to no-segmentation, nothing will happen.
4. When there are multiple transitions between inside-segmentation and
outside-segmentation, the line will be divided in so called segments. Each segment is
either fully inside or fully outside a segmentation. When it is inside a segmentation, its
enclosed area will be subtracted from the segmentation. When the segment is outside a
segmentation, its enclosed area it will be added to the segmentation.
The algorithm is described in full length in Tobias Heimann's diploma thesis
(MBI Technical Report 145, p. 37 - 40).
*/
int oaSize = 1000000; // if we need a fixed number, then let it be big
int* _ofsArray = new int[ oaSize ];
for (int i=0; i<oaSize; i++) _ofsArray[i] = 0;
std::vector<TSegData> segData;
segData.reserve( 16 );
Contour* contour3D = const_cast<Contour*>(m_Contour.GetPointer());
ContourUtils::Pointer contourUtils = ContourUtils::New();
Contour::Pointer projectedContour = contourUtils->ProjectContourTo2DSlice( m_WorkingImage, contour3D, true, false );
if (projectedContour.IsNull())
{
delete[] _ofsArray;
return;
}
if (projectedContour->GetNumberOfPoints() < 2)
{
delete[] _ofsArray;
return;
}
// convert the projected contour into a ipSegmentation format
mitkIpInt4_t* _points = new mitkIpInt4_t[2 * projectedContour->GetNumberOfPoints()];
const Contour::PathType::VertexListType* pointsIn2D = projectedContour->GetContourPath()->GetVertexList();
unsigned int index(0);
for ( Contour::PathType::VertexListType::const_iterator iter = pointsIn2D->begin();
iter != pointsIn2D->end();
++iter, ++index )
{
_points[ 2 * index + 0 ] = static_cast<mitkIpInt4_t>( (*iter)[0] + 0.5 );
_points[ 2 * index + 1 ] = static_cast<mitkIpInt4_t>( (*iter)[1] + 0.5 );
}
// store ofsets of the drawn line in array
int _ofsNum = 0;
unsigned int num = projectedContour->GetNumberOfPoints();
int lastOfs = -1;
for (unsigned int i=0; i<num-1; i++)
{
float x = _points [2*i] + 0.5;
float y = _points [2*i+1] + 0.5;
float difX = _points [2*i+2] - x + 0.5;
float difY = _points [2*i+3] - y + 0.5;
float length = sqrt( difX*difX + difY*difY );
float dx = difX / length;
float dy = difY / length;
for (int p=0; ((float)p)<length; p++)
{
// if ofs is out of bounds, very nasty things will happen, so better check coordinates:
if (x<0) x=0.5;
else if (x>=pic->n[0]) x = pic->n[0]-0.5;
if (y<0) y=0.5;
else if (y>=pic->n[1]) y = pic->n[1]-0.5;
// ok, now store safe ofs
int ofs = (int)(x) + pic->n[0]*((int)(y));
x += dx;
y += dy;
if (ofs != lastOfs)
{
_ofsArray[_ofsNum++] = ofs;
lastOfs = ofs;
}
}
}
if (_ofsNum == 0)
{
// contour was completely outside the binary image
delete[] _ofsArray;
delete[] _points;
return;
}
ipMITKSegmentationTYPE* picdata = static_cast<ipMITKSegmentationTYPE*>(pic->data);
// divide line in logical segments:
int numSegments = 0;
ipMITKSegmentationTYPE state = *(picdata + _ofsArray[0]);
int ofsP = 1;
int modifyStart, modifyEnd; // start of first and end of last segment
bool nextSegment;
segData.clear();
do
{
nextSegment = false;
while (ofsP<_ofsNum && *(picdata + _ofsArray[ofsP])==state) ofsP++;
if (ofsP<_ofsNum)
{
int lineStart = ofsP-1;
if (numSegments==0) modifyStart = ofsP;
state = *(picdata + _ofsArray[ofsP]);
while (ofsP<_ofsNum && *(picdata + _ofsArray[ofsP])==state) ofsP++;
if (ofsP<_ofsNum)
{
int lineEnd = ofsP;
modifyEnd = lineEnd;
nextSegment = true;
// now we've got a valid segment from lineStart to lineEnd
TSegData thisSegData;
thisSegData.lineStart = lineStart;
thisSegData.lineEnd = lineEnd;
thisSegData.modified = modifySegment( lineStart, lineEnd, state, pic, _ofsArray );
segData.push_back( thisSegData );
numSegments++;
}
}
} while (nextSegment);
for (int segNr=0; segNr < numSegments; segNr++)
{
// draw line if modified:
if ( segData[segNr].modified )
{
for (int i=segData[segNr].lineStart+1; i<segData[segNr].lineEnd; i++)
{
*(picdata + _ofsArray[i]) = 1;
}
}
}
if (numSegments == 0)
{
if (num <= 1)
{ // only a single pixel. _ofsArray[_ofsNum-1] in else statement would crash, so don't do anything
// no movement: delete operation
// This behaviour would probably confuse users when they use the correction
// tool to change a segmentation and it deletes much more than selected
// if (state == 1) ipMITKSegmentationReplaceRegion4N( pic, _ofsArray[0], 0 );
}
else if ( *(picdata + _ofsArray[_ofsNum-1]) == *(picdata + _ofsArray[0]))
{
// start point and end point both inside or both outside any segmentation
// normal paint operation
mitkIpInt4_t* p = new mitkIpInt4_t[2 * num];
for (unsigned int i = 0; i < num; i++)
{
p[2 * i] = (mitkIpInt4_t) _points [2 * i];
p[2 * i + 1] = (mitkIpInt4_t) _points [2 * i + 1];
}
if (state == 0) ipMITKSegmentationCombineRegion (pic, p, num, 0, IPSEGMENTATION_OR, 1);
else ipMITKSegmentationCombineRegion (pic, p, num, 0, IPSEGMENTATION_AND, 0);
delete[] p;
}
}
int numberOfContourPoints( 0 );
int oneContourOffset( 0 );
int newBufferSize( 0 );
int imageSize = pic->n[0]*pic->n[1];
for (oneContourOffset = 0; oneContourOffset < imageSize; oneContourOffset++)
if ( ((ipMITKSegmentationTYPE*) pic->data)[oneContourOffset]> 0) break;
float* contourPoints = ipMITKSegmentationGetContour8N( pic, oneContourOffset, numberOfContourPoints, newBufferSize ); // memory allocated with malloc
if (contourPoints)
{
// copy point from float* to mitk::Contour
Contour::Pointer contourInImageIndexCoordinates = Contour::New();
contourInImageIndexCoordinates->Initialize();
Point3D newPoint;
for (int index = 0; index < numberOfContourPoints; ++index)
{
newPoint[0] = contourPoints[ 2 * index + 0 ];
newPoint[1] = contourPoints[ 2 * index + 1];
newPoint[2] = 0;
contourInImageIndexCoordinates->AddVertex( newPoint );
}
free(contourPoints);
ContourUtils::Pointer contourUtils = ContourUtils::New();
contourUtils->FillContourInSlice( contourInImageIndexCoordinates, m_WorkingImage );
}
delete[] _ofsArray;
delete[] _points;
}
/**
Uses ipSegmentation algorithms to do the actual region growing. The result (binary image) is first smoothed by a 5x5 circle mask, then
its contour is extracted and converted to MITK coordinates.
*/
mitkIpPicDescriptor* mitk::RegionGrowingTool::PerformRegionGrowingAndUpdateContour()
{
// 1. m_OriginalPicSlice and m_SeedPointMemoryOffset are set to sensitive values, as well as m_LowerThreshold and m_UpperThreshold
assert (m_OriginalPicSlice);
if (m_OriginalPicSlice->n[0] != 256 || m_OriginalPicSlice->n[1] != 256) // ???
assert( (m_SeedPointMemoryOffset < static_cast<int>( m_OriginalPicSlice->n[0] * m_OriginalPicSlice->n[1] )) && (m_SeedPointMemoryOffset >= 0) ); // inside the image
// 2. ipSegmentation is used to perform region growing
float ignored;
int oneContourOffset( 0 );
mitkIpPicDescriptor* regionGrowerResult = ipMITKSegmentationGrowRegion4N( m_OriginalPicSlice,
m_SeedPointMemoryOffset, // seed point
true, // grayvalue interval relative to seed point gray value?
m_LowerThreshold,
m_UpperThreshold,
0, // continue until done (maxIterations == 0)
NULL, // allocate new memory (only this time, on mouse move we'll reuse the old buffer)
oneContourOffset, // a pixel that is near the resulting contour
ignored // ignored by us
);
if (!regionGrowerResult || oneContourOffset == -1)
{
Contour::Pointer dummyContour = Contour::New();
dummyContour->Initialize();
FeedbackContourTool::SetFeedbackContour( *dummyContour );
if (regionGrowerResult) ipMITKSegmentationFree(regionGrowerResult);
return NULL;
}
// 3. We smooth the result a little to reduce contour complexity
bool smoothResult( true ); // currently fixed, perhaps remove else block
mitkIpPicDescriptor* smoothedRegionGrowerResult;
if (smoothResult)
{
// Smooth the result (otherwise very detailed contour)
smoothedRegionGrowerResult = SmoothIPPicBinaryImage( regionGrowerResult, oneContourOffset );
ipMITKSegmentationFree( regionGrowerResult );
}
else
{
smoothedRegionGrowerResult = regionGrowerResult;
}
// 4. convert the result of region growing into a mitk::Contour
// At this point oneContourOffset could be useless, if smoothing destroyed a thin bridge. In these
// cases, we have two or more unconnected segmentation regions, and we don't know, which one is touched by oneContourOffset.
// In the bad case, the contour is not the one around our seedpoint, so the result looks very strange to the user.
// -> we remove the point where the contour started so far. Then we look from the bottom of the image for the first segmentation pixel
// and start another contour extraction from there. This is done, until the seedpoint is inside the contour
int numberOfContourPoints( 0 );
int newBufferSize( 0 );
float* contourPoints = ipMITKSegmentationGetContour8N( smoothedRegionGrowerResult, oneContourOffset, numberOfContourPoints, newBufferSize ); // memory allocated with malloc
if (contourPoints)
{
while ( !ipMITKSegmentationIsInsideContour( contourPoints, // contour
numberOfContourPoints, // points in contour
m_SeedPointMemoryOffset % smoothedRegionGrowerResult->n[0], // test point x
m_SeedPointMemoryOffset / smoothedRegionGrowerResult->n[0] // test point y
) )
{
// we decide that this cannot be part of the segmentation because the seedpoint is not contained in the contour (fill the 4-neighborhood with 0)
ipMITKSegmentationReplaceRegion4N( smoothedRegionGrowerResult, oneContourOffset, 0 );
// move the contour offset to the last row (x position of the seed point)
int rowLength = smoothedRegionGrowerResult->n[0]; // number of pixels in a row
oneContourOffset = m_SeedPointMemoryOffset % smoothedRegionGrowerResult->n[0] // x of seed point
+ rowLength*(smoothedRegionGrowerResult->n[1]-1); // y of last row
while ( oneContourOffset >=0
&& (*(static_cast<ipMITKSegmentationTYPE*>(smoothedRegionGrowerResult->data) + oneContourOffset) == 0) )
{
oneContourOffset -= rowLength; // if pixel at data+oneContourOffset is 0, then move up one row
}
if ( oneContourOffset < 0 )
{
break; // just use the last contour we found
}
free(contourPoints); // release contour memory
contourPoints = ipMITKSegmentationGetContour8N( smoothedRegionGrowerResult, oneContourOffset, numberOfContourPoints, newBufferSize ); // memory allocated with malloc
}
// copy point from float* to mitk::Contour
Contour::Pointer contourInImageIndexCoordinates = Contour::New();
contourInImageIndexCoordinates->Initialize();
Point3D newPoint;
for (int index = 0; index < numberOfContourPoints; ++index)
{
newPoint[0] = contourPoints[ 2 * index + 0 ];
newPoint[1] = contourPoints[ 2 * index + 1 ];
newPoint[2] = 0;
contourInImageIndexCoordinates->AddVertex( newPoint - 0.5);
}
free(contourPoints);
Contour::Pointer contourInWorldCoordinates = FeedbackContourTool::BackProjectContourFrom2DSlice( m_ReferenceSlice->GetGeometry(), contourInImageIndexCoordinates, true ); // true: sub 0.5 for ipSegmentation correctio
FeedbackContourTool::SetFeedbackContour( *contourInWorldCoordinates );
}
// 5. Result HAS TO BE freed by caller, contains the binary region growing result
return smoothedRegionGrowerResult;
}
bool mitk::SetRegionTool::OnMousePressed (Action* action, const StateEvent* stateEvent)
{
const PositionEvent* positionEvent = dynamic_cast<const PositionEvent*>(stateEvent->GetEvent());
if (!positionEvent) return false;
m_LastEventSender = positionEvent->GetSender();
m_LastEventSlice = m_LastEventSender->GetSlice();
if ( FeedbackContourTool::CanHandleEvent(stateEvent) < 1.0 ) return false;
// 1. Get the working image
Image::Pointer workingSlice = FeedbackContourTool::GetAffectedWorkingSlice( positionEvent );
if ( workingSlice.IsNull() ) return false; // can't do anything without the segmentation
// if click was outside the image, don't continue
const Geometry3D* sliceGeometry = workingSlice->GetGeometry();
itk::Index<2> projectedPointIn2D;
sliceGeometry->WorldToIndex( positionEvent->GetWorldPosition(), projectedPointIn2D );
if ( !sliceGeometry->IsIndexInside( projectedPointIn2D ) )
{
MITK_ERROR << "point apparently not inside segmentation slice" << std::endl;
return false; // can't use that as a seed point
}
// Convert to ipMITKSegmentationTYPE (because ipMITKSegmentationGetContour8N relys on that data type)
itk::Image< ipMITKSegmentationTYPE, 2 >::Pointer correctPixelTypeImage;
CastToItkImage( workingSlice, correctPixelTypeImage );
assert (correctPixelTypeImage.IsNotNull() );
// possible bug in CastToItkImage ?
// direction maxtrix is wrong/broken/not working after CastToItkImage, leading to a failed assertion in
// mitk/Core/DataStructures/mitkSlicedGeometry3D.cpp, 479:
// virtual void mitk::SlicedGeometry3D::SetSpacing(const mitk::Vector3D&): Assertion `aSpacing[0]>0 && aSpacing[1]>0 && aSpacing[2]>0' failed
// solution here: we overwrite it with an unity matrix
itk::Image< ipMITKSegmentationTYPE, 2 >::DirectionType imageDirection;
imageDirection.SetIdentity();
correctPixelTypeImage->SetDirection(imageDirection);
Image::Pointer temporarySlice = Image::New();
// temporarySlice = ImportItkImage( correctPixelTypeImage );
CastToMitkImage( correctPixelTypeImage, temporarySlice );
// check index positions
mitkIpPicDescriptor* originalPicSlice = mitkIpPicNew();
CastToIpPicDescriptor( temporarySlice, originalPicSlice );
int m_SeedPointMemoryOffset = projectedPointIn2D[1] * originalPicSlice->n[0] + projectedPointIn2D[0];
if ( m_SeedPointMemoryOffset >= static_cast<int>( originalPicSlice->n[0] * originalPicSlice->n[1] ) ||
m_SeedPointMemoryOffset < 0 )
{
MITK_ERROR << "Memory offset calculation if mitk::SetRegionTool has some serious flaw! Aborting.." << std::endl;
return false;
}
// 2. Determine the contour that surronds the selected "piece of the image"
// find a contour seed point
unsigned int oneContourOffset = static_cast<unsigned int>( m_SeedPointMemoryOffset ); // safe because of earlier check if m_SeedPointMemoryOffset < 0
/**
* The logic of finding a starting point for the contour is the following:
*
* - If the initial seed point is 0, we are either inside a hole or outside of every segmentation.
* We move to the right until we hit a 1, which must be part of a contour.
*
* - If the initial seed point is 1, then ...
* we now do the same (running to the right) until we hit a 1
*
* In both cases the found contour point is used to extract a contour and
* then a test is applied to find out if the initial seed point is contained
* in the contour. If this is the case, filling should be applied, otherwise
* nothing is done.
*/
unsigned int size = originalPicSlice->n[0] * originalPicSlice->n[1];
/*
unsigned int rowSize = originalPicSlice->n[0];
*/
ipMITKSegmentationTYPE* data = static_cast<ipMITKSegmentationTYPE*>(originalPicSlice->data);
if ( data[oneContourOffset] == 0 ) // initial seed 0
{
for ( ; oneContourOffset < size; ++oneContourOffset )
{
if ( data[oneContourOffset] > 0 ) break;
}
}
else if ( data[oneContourOffset] == 1 ) // initial seed 1
{
unsigned int lastValidPixel = size-1; // initialization, will be changed lateron
bool inSeg = true; // inside segmentation?
for ( ; oneContourOffset < size; ++oneContourOffset )
{
if ( ( data[oneContourOffset] == 0 ) && inSeg ) // pixel 0 and inside-flag set: this happens at the first pixel outside a filled region
{
inSeg = false;
lastValidPixel = oneContourOffset - 1; // store the last pixel position inside a filled region
break;
}
else // pixel 1, inside-flag doesn't matter: this happens while we are inside a filled region
{
inSeg = true; // first iteration lands here
}
}
oneContourOffset = lastValidPixel;
}
else
{
MITK_ERROR << "Fill/Erase was never intended to work with other than binary images." << std::endl;
m_FillContour = false;
return false;
}
if (oneContourOffset == size) // nothing found until end of slice
{
m_FillContour = false;
return false;
}
int numberOfContourPoints( 0 );
int newBufferSize( 0 );
//MITK_INFO << "getting contour from offset " << oneContourOffset << " ("<<oneContourOffset%originalPicSlice->n[0]<<","<<oneContourOffset/originalPicSlice->n[0]<<")"<<std::endl;
float* contourPoints = ipMITKSegmentationGetContour8N( originalPicSlice, oneContourOffset, numberOfContourPoints, newBufferSize ); // memory allocated with malloc
//MITK_INFO << "contourPoints " << contourPoints << " (N="<<numberOfContourPoints<<")"<<std::endl;
assert(contourPoints == NULL || numberOfContourPoints > 0);
bool cursorInsideContour = ipMITKSegmentationIsInsideContour( contourPoints, numberOfContourPoints, projectedPointIn2D[0], projectedPointIn2D[1]);
// decide if contour should be filled or not
m_FillContour = cursorInsideContour;
if (m_FillContour)
{
// copy point from float* to mitk::Contour
Contour::Pointer contourInImageIndexCoordinates = Contour::New();
contourInImageIndexCoordinates->Initialize();
Point3D newPoint;
for (int index = 0; index < numberOfContourPoints; ++index)
{
newPoint[0] = contourPoints[ 2 * index + 0 ];
newPoint[1] = contourPoints[ 2 * index + 1];
newPoint[2] = 0;
contourInImageIndexCoordinates->AddVertex( newPoint - 0.5 );
}
m_SegmentationContourInWorldCoordinates = FeedbackContourTool::BackProjectContourFrom2DSlice( workingSlice->GetGeometry(), contourInImageIndexCoordinates, true ); // true, correct the result from ipMITKSegmentationGetContour8N
// 3. Show the contour
FeedbackContourTool::SetFeedbackContour( *m_SegmentationContourInWorldCoordinates );
FeedbackContourTool::SetFeedbackContourVisible(true);
mitk::RenderingManager::GetInstance()->RequestUpdate(positionEvent->GetSender()->GetRenderWindow());
}
// always generate a second contour, containing the whole image (used when CTRL is pressed)
{
// copy point from float* to mitk::Contour
Contour::Pointer contourInImageIndexCoordinates = Contour::New();
contourInImageIndexCoordinates->Initialize();
Point3D newPoint;
newPoint[0] = 0; newPoint[1] = 0; newPoint[2] = 0.0;
contourInImageIndexCoordinates->AddVertex( newPoint );
newPoint[0] = originalPicSlice->n[0]; newPoint[1] = 0; newPoint[2] = 0.0;
contourInImageIndexCoordinates->AddVertex( newPoint );
newPoint[0] = originalPicSlice->n[0]; newPoint[1] = originalPicSlice->n[1]; newPoint[2] = 0.0;
contourInImageIndexCoordinates->AddVertex( newPoint );
newPoint[0] = 0; newPoint[1] = originalPicSlice->n[1]; newPoint[2] = 0.0;
contourInImageIndexCoordinates->AddVertex( newPoint );
m_WholeImageContourInWorldCoordinates = FeedbackContourTool::BackProjectContourFrom2DSlice( workingSlice->GetGeometry(), contourInImageIndexCoordinates, true ); // true, correct the result from ipMITKSegmentationGetContour8N
// 3. Show the contour
FeedbackContourTool::SetFeedbackContour( *m_SegmentationContourInWorldCoordinates );
FeedbackContourTool::SetFeedbackContourVisible(true);
mitk::RenderingManager::GetInstance()->RequestUpdate(positionEvent->GetSender()->GetRenderWindow());
}
free(contourPoints);
return true;
}