// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
DoubleArrayType::Pointer ModifiedLambertProjection::createStereographicProjection(int dim)
{
DoubleArrayType::Pointer stereoIntensity = DoubleArrayType::CreateArray(dim * dim, 1, "ModifiedLambertProjection_StereographicProjection");
stereoIntensity->initializeWithZeros();
createStereographicProjection(dim, stereoIntensity.get());
return stereoIntensity;
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void QuadGeom::findDerivatives(DoubleArrayType::Pointer field, DoubleArrayType::Pointer derivatives)
{
int64_t numQuads = getNumberOfQuads();
int cDims = field->getNumberOfComponents();
double* fieldPtr = field->getPointer(0);
double* derivsPtr = derivatives->getPointer(0);
double values[4];
double derivs[3];
int64_t verts[4];
for (int64_t i = 0; i < numQuads; i++)
{
getVertsAtQuad(i, verts);
for (int j = 0; j < cDims; j++)
{
for (size_t k = 0; k < 4; k++)
{
values[k] = fieldPtr[cDims * verts[k] + j];
}
DerivativeHelpers::QuadDeriv()(this, i, values, derivs);
derivsPtr[i * 3 * cDims + j * 3] = derivs[0];
derivsPtr[i * 3 * cDims + j * 3 + 1] = derivs[1];
derivsPtr[i * 3 * cDims + j * 3 + 2] = derivs[2];
}
}
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void ConvertOrientations::execute()
{
setErrorCondition(0);
dataCheck();
if(getErrorCondition() < 0) { return; }
IDataArray::Pointer iDataArrayPtr = getDataContainerArray()->getPrereqIDataArrayFromPath<IDataArray, AbstractFilter>(this, getInputOrientationArrayPath());
DataArrayPath outputArrayPath = getInputOrientationArrayPath();
outputArrayPath.setDataArrayName(getOutputOrientationArrayName());
FloatArrayType::Pointer fArray = std::dynamic_pointer_cast<FloatArrayType>(iDataArrayPtr);
if(NULL != fArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<float>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
FloatArrayType::Pointer outData = getDataContainerArray()->getPrereqArrayFromPath<DataArray<float>, AbstractFilter>(this, outputArrayPath, outputCDims);
generateRepresentation<float>(this, fArray, outData);
}
DoubleArrayType::Pointer dArray = std::dynamic_pointer_cast<DoubleArrayType>(iDataArrayPtr);
if(NULL != dArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<double>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
DoubleArrayType::Pointer outData = getDataContainerArray()->getPrereqArrayFromPath<DataArray<double>, AbstractFilter>(this, outputArrayPath, outputCDims);
generateRepresentation<double>(this, dArray, outData);
}
notifyStatusMessage(getHumanLabel(), "Complete");
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
DoubleArrayType::Pointer ModifiedLambertProjection::createStereographicProjection(int dim)
{
QVector<size_t> tDims(2, dim);
QVector<size_t> cDims(1, 1);
DoubleArrayType::Pointer stereoIntensity = DoubleArrayType::CreateArray(tDims, cDims, "ModifiedLambertProjection_StereographicProjection");
stereoIntensity->initializeWithZeros();
createStereographicProjection(dim, stereoIntensity.get());
return stereoIntensity;
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void GoldfeatherReader::dataCheck(bool preflight, size_t voxels, size_t fields, size_t ensembles)
{
setErrorCondition(0);
std::stringstream ss;
SurfaceMeshDataContainer* sm = getSurfaceMeshDataContainer();
if (getInputFile().empty() == true)
{
ss << ClassName() << " needs the Input File Set and it was not.";
setErrorCondition(-387);
addErrorMessage(getHumanLabel(), ss.str(), getErrorCondition());
}
else if (MXAFileInfo::exists(getInputFile()) == false)
{
ss << "The input file does not exist.";
setErrorCondition(-388);
addErrorMessage(getHumanLabel(), ss.str(), getErrorCondition());
}
DREAM3D::SurfaceMesh::VertListPointer_t vertices = DREAM3D::SurfaceMesh::VertList_t::CreateArray(1, DREAM3D::VertexData::SurfaceMeshNodes);
DREAM3D::SurfaceMesh::FaceListPointer_t triangles = DREAM3D::SurfaceMesh::FaceList_t::CreateArray(1, DREAM3D::FaceData::SurfaceMeshFaces);
sm->setVertices(vertices);
sm->setFaces(triangles);
DoubleArrayType::Pointer normalsPtr = DoubleArrayType::CreateArray(1, 3, DREAM3D::VertexData::SurfaceMeshNodeNormals);
//addCreatedCellData( normalsPtr->GetName());
sm->addVertexData(normalsPtr->GetName(), normalsPtr);
DoubleArrayType::Pointer pcurv1Ptr = DoubleArrayType::CreateArray(1, 1, "Principal_Curvature_1");
//addCreatedCellData( pcurv1Ptr->GetName());
sm->addVertexData(pcurv1Ptr->GetName(), pcurv1Ptr);
DoubleArrayType::Pointer pcurv2Ptr = DoubleArrayType::CreateArray(1, 1, "Principal_Curvature_2");
// addCreatedCellData( pcurv2Ptr->GetName());
sm->addVertexData(pcurv2Ptr->GetName(), pcurv2Ptr);
DoubleArrayType::Pointer pDirection1Ptr = DoubleArrayType::CreateArray(1, 3, "Principal_Direction_1");
// addCreatedCellData( pDirection1Ptr->GetName());
sm->addVertexData(pDirection1Ptr->GetName(), pDirection1Ptr);
DoubleArrayType::Pointer pDirection2Ptr = DoubleArrayType::CreateArray(1, 3, "Principal_Direction_2");
// addCreatedCellData( pDirection2Ptr->GetName());
sm->addVertexData(pDirection2Ptr->GetName(), pDirection2Ptr);
DataArray<int32_t>::Pointer faceLabelPtr = DataArray<int32_t>::CreateArray(1, 2, DREAM3D::FaceData::SurfaceMeshFaceLabels);
// addCreatedFieldData( faceLabelPtr->GetName());
sm->addFaceData(faceLabelPtr->GetName(), faceLabelPtr);
DoubleArrayType::Pointer triNormalsPtr = DoubleArrayType::CreateArray(1, 3, DREAM3D::FaceData::SurfaceMeshFaceNormals);
// addCreatedFieldData( triNormalsPtr->GetName());
sm->addFaceData(triNormalsPtr->GetName(), triNormalsPtr);
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void ConvertOrientations::dataCheck()
{
setErrorCondition(0);
if(getInputType() == getOutputType())
{
QString ss = QObject::tr("Input and output orientation representation types must be different");
setErrorCondition(-1000);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
if( getInputType() < OrientationConverter<float>::GetMinIndex() || getInputType() > OrientationConverter<float>::GetMaxIndex() )
{
QString ss = QObject::tr("There was an error with teh selection of the input orientation type. The valid values range from 0 to %1").arg(OrientationConverter<float>::GetMaxIndex());
setErrorCondition(-1001);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
if( getOutputType() < OrientationConverter<float>::GetMinIndex() || getOutputType() > OrientationConverter<float>::GetMaxIndex() )
{
QString ss = QObject::tr("There was an error with the selection of the output orientation type. The valid values range from 0 to %1").arg(OrientationConverter<float>::GetMaxIndex());
setErrorCondition(-1002);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
// We need to return NOW because the next lines assume we have and index that is within
// the valid bounds
if(getErrorCondition() < 0) { return; }
// Figure out what kind of Array the user selected
// Get the input data and create the output Data appropriately
IDataArray::Pointer iDataArrayPtr = getDataContainerArray()->getPrereqIDataArrayFromPath<IDataArray, AbstractFilter>(this, getInputOrientationArrayPath());
DataArrayPath outputArrayPath = getInputOrientationArrayPath();
outputArrayPath.setDataArrayName(getOutputOrientationArrayName());
FloatArrayType::Pointer fArray = std::dynamic_pointer_cast<FloatArrayType>(iDataArrayPtr);
if(NULL != fArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<float>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
getDataContainerArray()->createNonPrereqArrayFromPath<DataArray<float>, AbstractFilter, float>(this, outputArrayPath, 0, outputCDims);
}
DoubleArrayType::Pointer dArray = std::dynamic_pointer_cast<DoubleArrayType>(iDataArrayPtr);
if(NULL != dArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<double>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
getDataContainerArray()->createNonPrereqArrayFromPath<DataArray<double>, AbstractFilter, double>(this, outputArrayPath, 0, outputCDims);
}
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void VertexGeom::findDerivatives(DoubleArrayType::Pointer field, DoubleArrayType::Pointer derivatives)
{
int64_t numVerts = getNumberOfVertices();
int cDims = field->getNumberOfComponents();
double* derivsPtr = derivatives->getPointer(0);
for (int64_t i = 0; i < numVerts; i++)
{
for (int j = 0; j < cDims; j++)
{
derivsPtr[i * 3 * cDims + j * 3] = 0.0;
derivsPtr[i * 3 * cDims + j * 3 + 1] = 0.0;
derivsPtr[i * 3 * cDims + j * 3 + 2] = 0.0;
}
}
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void GoldfeatherReader::execute()
{
int err = 0;
std::stringstream ss;
setErrorCondition(err);
SurfaceMeshDataContainer* m = getSurfaceMeshDataContainer();
if(NULL == m)
{
setErrorCondition(-999);
notifyErrorMessage("The Voxel DataContainer Object was NULL", -999);
return;
}
setErrorCondition(0);
FILE* f = fopen(m_InputFile.c_str(), "r");
if (NULL == f)
{
setErrorCondition(-999);
notifyErrorMessage("Error opening Input file", getErrorCondition());
return;
}
ScopedFileMonitor fileMonitor(f);
int nNodes = 0;
fscanf(f, "%d\n", &nNodes);
dataCheck(false, nNodes, 1, 1);
// Allocate the Nodes, Normals, curvatures and principal direction vectors
DREAM3D::SurfaceMesh::VertListPointer_t nodesPtr = DREAM3D::SurfaceMesh::VertList_t::CreateArray(nNodes, DREAM3D::VertexData::SurfaceMeshNodes);
nodesPtr->initializeWithZeros();
DREAM3D::SurfaceMesh::Vert_t* nodes = nodesPtr->GetPointer(0);
DoubleArrayType::Pointer normalsPtr = DoubleArrayType::CreateArray(nNodes, 3, DREAM3D::VertexData::SurfaceMeshNodeNormals);
double* normals = normalsPtr->GetPointer(0);
DoubleArrayType::Pointer pcurv1Ptr = DoubleArrayType::CreateArray(nNodes, 1, "Principal_Curvature_1");
double* pcurv1 = pcurv1Ptr->GetPointer(0);
DoubleArrayType::Pointer pcurv2Ptr = DoubleArrayType::CreateArray(nNodes, 1, "Principal_Curvature_2");
double* pcurv2 = pcurv2Ptr->GetPointer(0);
DoubleArrayType::Pointer pDirection1Ptr = DoubleArrayType::CreateArray(nNodes, 3, "Principal_Direction_1");
double* pDirection1 = pDirection1Ptr->GetPointer(0);
DoubleArrayType::Pointer pDirection2Ptr = DoubleArrayType::CreateArray(nNodes, 3, "Principal_Direction_2");
double* pDirection2 = pDirection2Ptr->GetPointer(0);
float x, y, z, n0, n1, n2, p1, p2;
for(int n = 0; n < nNodes; ++n)
{
fscanf(f, "%f %f %f %f %f %f %f %f\n", &x, &y, &z, &n0, &n1, &n2, &p1, &p2);
nodes[n].pos[0] = x;
nodes[n].pos[1] = y;
nodes[n].pos[2] = z;
normals[n*3+0] = n0;
normals[n*3+1] = n1;
normals[n*3+2] = n2;
pcurv1[n] = p1;
pcurv2[n] = p2;
// Read the next line of the data which is the principal direction vectors
fscanf(f, "%f %f %f %f %f %f\n", &x, &y, &z, &n0, &n1, &n2);
pDirection1[n*3+0] = x;
pDirection1[n*3+1] = y;
pDirection1[n*3+2] = z;
pDirection2[n*3+0] = n0;
pDirection2[n*3+1] = n1;
pDirection2[n*3+2] = n2;
}
m->setVertices(nodesPtr);
m->addVertexData(normalsPtr->GetName(), normalsPtr);
m->addVertexData(pcurv1Ptr->GetName(), pcurv1Ptr);
m->addVertexData(pcurv2Ptr->GetName(), pcurv2Ptr);
m->addVertexData(pDirection1Ptr->GetName(), pDirection1Ptr);
m->addVertexData(pDirection2Ptr->GetName(), pDirection2Ptr);
int nTriangles = 0;
err = fscanf(f, "%d\n", &nTriangles);
if (err < 0)
{
off_t fpos;
fpos = ftell(f);
setErrorCondition(-876);
notifyErrorMessage("Error Reading the number of Triangles from the file", getErrorCondition());
return;
}
DREAM3D::SurfaceMesh::FaceListPointer_t trianglesPtr = DREAM3D::SurfaceMesh::FaceList_t::CreateArray(nTriangles, DREAM3D::FaceData::SurfaceMeshFaces);
trianglesPtr->initializeWithZeros();
DREAM3D::SurfaceMesh::Face_t* triangles = trianglesPtr->GetPointer(0);
DataArray<int32_t>::Pointer faceLabelPtr = DataArray<int32_t>::CreateArray(nTriangles, 2, DREAM3D::FaceData::SurfaceMeshFaceLabels);
faceLabelPtr->initializeWithZeros();
int32_t* faceLabels = faceLabelPtr->GetPointer(0);
DoubleArrayType::Pointer triNormalsPtr = DoubleArrayType::CreateArray(nTriangles, 3, DREAM3D::FaceData::SurfaceMeshFaceNormals);
double* triNormals = triNormalsPtr->GetPointer(0);
for(int t = 0; t < nTriangles; ++t)
{
fscanf(f, "%f %f %f %f %f %f", &x, &y, &z, &n0, &n1, &n2);
triangles[t].verts[0] = x;
triangles[t].verts[1] = y;
triangles[t].verts[2] = z;
// triangles[t].tIndex = t;
faceLabels[t*2] = 0;
faceLabels[t*2+1] = 1;
triNormals[t*3+0] = n0;
triNormals[t*3+1] = n1;
triNormals[t*3+2] = n2;
}
m->setFaces(trianglesPtr);
m->addFaceData(faceLabelPtr->GetName(), faceLabelPtr);
m->addFaceData(triNormalsPtr->GetName(), triNormalsPtr);
/* Let the GUI know we are done with this filter */
notifyStatusMessage("Complete");
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void VisualizeGBCDPoleFigure::execute()
{
setErrorCondition(0);
dataCheck();
if(getErrorCondition() < 0) { return; }
// Make sure any directory path is also available as the user may have just typed
// in a path without actually creating the full path
QFileInfo fi(getOutputFile());
QDir dir(fi.path());
if(!dir.mkpath("."))
{
QString ss;
ss = QObject::tr("Error creating parent path '%1'").arg(dir.path());
setErrorCondition(-1);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
return;
}
QFile file(getOutputFile());
if (!file.open(QIODevice::WriteOnly | QIODevice::Text))
{
QString ss = QObject::tr("Error opening output file '%1'").arg(getOutputFile());
setErrorCondition(-100);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
return;
}
FloatArrayType::Pointer gbcdDeltasArray = FloatArrayType::CreateArray(5, "GBCDDeltas");
gbcdDeltasArray->initializeWithZeros();
FloatArrayType::Pointer gbcdLimitsArray = FloatArrayType::CreateArray(10, "GBCDLimits");
gbcdLimitsArray->initializeWithZeros();
Int32ArrayType::Pointer gbcdSizesArray = Int32ArrayType::CreateArray(5, "GBCDSizes");
gbcdSizesArray->initializeWithZeros();
float* gbcdDeltas = gbcdDeltasArray->getPointer(0);
int* gbcdSizes = gbcdSizesArray->getPointer(0);
float* gbcdLimits = gbcdLimitsArray->getPointer(0);
// Original Ranges from Dave R.
//m_GBCDlimits[0] = 0.0f;
//m_GBCDlimits[1] = cosf(1.0f*m_pi);
//m_GBCDlimits[2] = 0.0f;
//m_GBCDlimits[3] = 0.0f;
//m_GBCDlimits[4] = cosf(1.0f*m_pi);
//m_GBCDlimits[5] = 2.0f*m_pi;
//m_GBCDlimits[6] = cosf(0.0f);
//m_GBCDlimits[7] = 2.0f*m_pi;
//m_GBCDlimits[8] = 2.0f*m_pi;
//m_GBCDlimits[9] = cosf(0.0f);
// Greg R. Ranges
gbcdLimits[0] = 0.0f;
gbcdLimits[1] = 0.0f;
gbcdLimits[2] = 0.0f;
gbcdLimits[3] = 0.0f;
gbcdLimits[4] = 0.0f;
gbcdLimits[5] = SIMPLib::Constants::k_PiOver2;
gbcdLimits[6] = 1.0f;
gbcdLimits[7] = SIMPLib::Constants::k_PiOver2;
gbcdLimits[8] = 1.0f;
gbcdLimits[9] = SIMPLib::Constants::k_2Pi;
// reset the 3rd and 4th dimensions using the square grid approach
gbcdLimits[3] = -sqrtf(SIMPLib::Constants::k_PiOver2);
gbcdLimits[4] = -sqrtf(SIMPLib::Constants::k_PiOver2);
gbcdLimits[8] = sqrtf(SIMPLib::Constants::k_PiOver2);
gbcdLimits[9] = sqrtf(SIMPLib::Constants::k_PiOver2);
// get num components of GBCD
QVector<size_t> cDims = m_GBCDPtr.lock()->getComponentDimensions();
gbcdSizes[0] = cDims[0];
gbcdSizes[1] = cDims[1];
gbcdSizes[2] = cDims[2];
gbcdSizes[3] = cDims[3];
gbcdSizes[4] = cDims[4];
gbcdDeltas[0] = (gbcdLimits[5] - gbcdLimits[0]) / float(gbcdSizes[0]);
gbcdDeltas[1] = (gbcdLimits[6] - gbcdLimits[1]) / float(gbcdSizes[1]);
gbcdDeltas[2] = (gbcdLimits[7] - gbcdLimits[2]) / float(gbcdSizes[2]);
gbcdDeltas[3] = (gbcdLimits[8] - gbcdLimits[3]) / float(gbcdSizes[3]);
gbcdDeltas[4] = (gbcdLimits[9] - gbcdLimits[4]) / float(gbcdSizes[4]);
float vec[3] = { 0.0f, 0.0f, 0.0f };
float vec2[3] = { 0.0f, 0.0f, 0.0f };
float rotNormal[3] = { 0.0f, 0.0f, 0.0f };
float rotNormal2[3] = { 0.0f, 0.0f, 0.0f };
float sqCoord[2] = { 0.0f, 0.0f };
float dg[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float dgt[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float dg1[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float dg2[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float sym1[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float sym2[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float sym2t[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float mis_euler1[3] = { 0.0f, 0.0f, 0.0f };
float misAngle = m_MisorientationRotation.angle * SIMPLib::Constants::k_PiOver180;
float normAxis[3] = { m_MisorientationRotation.h, m_MisorientationRotation.k, m_MisorientationRotation.l };
MatrixMath::Normalize3x1(normAxis);
// convert axis angle to matrix representation of misorientation
FOrientArrayType om(9, 0.0f);
FOrientTransformsType::ax2om(FOrientArrayType(normAxis[0], normAxis[1], normAxis[2], misAngle), om);
om.toGMatrix(dg);
// take inverse of misorientation variable to use for switching symmetry
MatrixMath::Transpose3x3(dg, dgt);
// Get our SpaceGroupOps pointer for the selected crystal structure
SpaceGroupOps::Pointer orientOps = m_OrientationOps[m_CrystalStructures[m_PhaseOfInterest]];
// get number of symmetry operators
int32_t n_sym = orientOps->getNumSymOps();
int32_t xpoints = 100;
int32_t ypoints = 100;
int32_t zpoints = 1;
int32_t xpointshalf = xpoints / 2;
int32_t ypointshalf = ypoints / 2;
float xres = 2.0f / float(xpoints);
float yres = 2.0f / float(ypoints);
float zres = (xres + yres) / 2.0;
float x = 0.0f, y = 0.0f;
float sum = 0;
int32_t count = 0;
bool nhCheck = false;
int32_t hemisphere = 0;
int32_t shift1 = gbcdSizes[0];
int32_t shift2 = gbcdSizes[0] * gbcdSizes[1];
int32_t shift3 = gbcdSizes[0] * gbcdSizes[1] * gbcdSizes[2];
int32_t shift4 = gbcdSizes[0] * gbcdSizes[1] * gbcdSizes[2] * gbcdSizes[3];
int64_t totalGBCDBins = gbcdSizes[0] * gbcdSizes[1] * gbcdSizes[2] * gbcdSizes[3] * gbcdSizes[4] * 2;
QVector<size_t> dims(1, 1);
DoubleArrayType::Pointer poleFigureArray = DoubleArrayType::NullPointer();
poleFigureArray = DoubleArrayType::CreateArray(xpoints * ypoints, dims, "PoleFigure");
poleFigureArray->initializeWithZeros();
double* poleFigure = poleFigureArray->getPointer(0);
for (int32_t k = 0; k < ypoints; k++)
{
for (int32_t l = 0; l < xpoints; l++)
{
// get (x,y) for stereographic projection pixel
x = float(l - xpointshalf) * xres + (xres / 2.0);
y = float(k - ypointshalf) * yres + (yres / 2.0);
if ((x * x + y * y) <= 1.0)
{
sum = 0.0f;
count = 0;
vec[2] = -((x * x + y * y) - 1) / ((x * x + y * y) + 1);
vec[0] = x * (1 + vec[2]);
vec[1] = y * (1 + vec[2]);
MatrixMath::Multiply3x3with3x1(dgt, vec, vec2);
// Loop over all the symetry operators in the given cystal symmetry
for (int32_t i = 0; i < n_sym; i++)
{
//get symmetry operator1
orientOps->getMatSymOp(i, sym1);
for (int32_t j = 0; j < n_sym; j++)
{
// get symmetry operator2
orientOps->getMatSymOp(j, sym2);
MatrixMath::Transpose3x3(sym2, sym2t);
// calculate symmetric misorientation
MatrixMath::Multiply3x3with3x3(dg, sym2t, dg1);
MatrixMath::Multiply3x3with3x3(sym1, dg1, dg2);
// convert to euler angle
FOrientArrayType eu(mis_euler1, 3);
FOrientTransformsType::om2eu(FOrientArrayType(dg2), eu);
if (mis_euler1[0] < SIMPLib::Constants::k_PiOver2 && mis_euler1[1] < SIMPLib::Constants::k_PiOver2 && mis_euler1[2] < SIMPLib::Constants::k_PiOver2)
{
mis_euler1[1] = cosf(mis_euler1[1]);
// find bins in GBCD
int32_t location1 = int32_t((mis_euler1[0] - gbcdLimits[0]) / gbcdDeltas[0]);
int32_t location2 = int32_t((mis_euler1[1] - gbcdLimits[1]) / gbcdDeltas[1]);
int32_t location3 = int32_t((mis_euler1[2] - gbcdLimits[2]) / gbcdDeltas[2]);
//find symmetric poles using the first symmetry operator
MatrixMath::Multiply3x3with3x1(sym1, vec, rotNormal);
//get coordinates in square projection of crystal normal parallel to boundary normal
nhCheck = getSquareCoord(rotNormal, sqCoord);
// Note the switch to have theta in the 4 slot and cos(Phi) int he 3 slot
int32_t location4 = int32_t((sqCoord[0] - gbcdLimits[3]) / gbcdDeltas[3]);
int32_t location5 = int32_t((sqCoord[1] - gbcdLimits[4]) / gbcdDeltas[4]);
if (location1 >= 0 && location2 >= 0 && location3 >= 0 && location4 >= 0 && location5 >= 0 &&
location1 < gbcdSizes[0] && location2 < gbcdSizes[1] && location3 < gbcdSizes[2] && location4 < gbcdSizes[3] && location5 < gbcdSizes[4])
{
hemisphere = 0;
if (nhCheck == false) { hemisphere = 1; }
sum += m_GBCD[(m_PhaseOfInterest * totalGBCDBins) + 2 * ((location5 * shift4) + (location4 * shift3) + (location3 * shift2) + (location2 * shift1) + location1) + hemisphere];
count++;
}
}
// again in second crystal reference frame
// calculate symmetric misorientation
MatrixMath::Multiply3x3with3x3(dgt, sym2, dg1);
MatrixMath::Multiply3x3with3x3(sym1, dg1, dg2);
// convert to euler angle
FOrientTransformsType::om2eu(FOrientArrayType(dg2), eu);
if (mis_euler1[0] < SIMPLib::Constants::k_PiOver2 && mis_euler1[1] < SIMPLib::Constants::k_PiOver2 && mis_euler1[2] < SIMPLib::Constants::k_PiOver2)
{
mis_euler1[1] = cosf(mis_euler1[1]);
// find bins in GBCD
int32_t location1 = int32_t((mis_euler1[0] - gbcdLimits[0]) / gbcdDeltas[0]);
int32_t location2 = int32_t((mis_euler1[1] - gbcdLimits[1]) / gbcdDeltas[1]);
int32_t location3 = int32_t((mis_euler1[2] - gbcdLimits[2]) / gbcdDeltas[2]);
// find symmetric poles using the first symmetry operator
MatrixMath::Multiply3x3with3x1(sym1, vec2, rotNormal2);
// get coordinates in square projection of crystal normal parallel to boundary normal
nhCheck = getSquareCoord(rotNormal2, sqCoord);
// Note the switch to have theta in the 4 slot and cos(Phi) int he 3 slot
int32_t location4 = int32_t((sqCoord[0] - gbcdLimits[3]) / gbcdDeltas[3]);
int32_t location5 = int32_t((sqCoord[1] - gbcdLimits[4]) / gbcdDeltas[4]);
if (location1 >= 0 && location2 >= 0 && location3 >= 0 && location4 >= 0 && location5 >= 0 &&
location1 < gbcdSizes[0] && location2 < gbcdSizes[1] && location3 < gbcdSizes[2] && location4 < gbcdSizes[3] && location5 < gbcdSizes[4])
{
hemisphere = 0;
if (nhCheck == false) { hemisphere = 1; }
sum += m_GBCD[(m_PhaseOfInterest * totalGBCDBins) + 2 * ((location5 * shift4) + (location4 * shift3) + (location3 * shift2) + (location2 * shift1) + location1) + hemisphere];
count++;
}
}
}
}
if (count > 0)
{
poleFigure[(k * xpoints) + l] = sum / float(count);
}
}
}
}
FILE* f = NULL;
f = fopen(m_OutputFile.toLatin1().data(), "wb");
if (NULL == f)
{
QString ss = QObject::tr("Error opening output file '%1'").arg(m_OutputFile);
setErrorCondition(-1);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
return;
}
// Write the correct header
fprintf(f, "# vtk DataFile Version 2.0\n");
fprintf(f, "data set from DREAM3D\n");
fprintf(f, "BINARY");
fprintf(f, "\n");
fprintf(f, "DATASET RECTILINEAR_GRID\n");
fprintf(f, "DIMENSIONS %d %d %d\n", xpoints + 1, ypoints + 1, zpoints + 1);
// Write the Coords
writeCoords(f, "X_COORDINATES", "float", xpoints + 1, (-float(xpoints)*xres / 2.0f), xres);
writeCoords(f, "Y_COORDINATES", "float", ypoints + 1, (-float(ypoints)*yres / 2.0f), yres);
writeCoords(f, "Z_COORDINATES", "float", zpoints + 1, (-float(zpoints)*zres / 2.0f), zres);
int32_t total = xpoints * ypoints * zpoints;
fprintf(f, "CELL_DATA %d\n", total);
fprintf(f, "SCALARS %s %s 1\n", "Intensity", "float");
fprintf(f, "LOOKUP_TABLE default\n");
{
float* gn = new float[total];
float t;
count = 0;
for (int32_t j = 0; j < ypoints; j++)
{
for (int32_t i = 0; i < xpoints; i++)
{
t = float(poleFigure[(j * xpoints) + i]);
SIMPLib::Endian::FromSystemToBig::convert(t);
gn[count] = t;
count++;
}
}
size_t totalWritten = fwrite(gn, sizeof(float), (total), f);
delete[] gn;
if (totalWritten != (total))
{
QString ss = QObject::tr("Error writing binary VTK data to file '%1'").arg(m_OutputFile);
setErrorCondition(-1);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
fclose(f);
return;
}
}
fclose(f);
/* Let the GUI know we are done with this filter */
notifyStatusMessage(getHumanLabel(), "Complete");
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void FindGBCD::execute()
{
setErrorCondition(0);
dataCheckVoxel();
if(getErrorCondition() < 0) { return; }
// order here matters...because we are going to use the size of the crystal structures out of the dataCheckVoxel to size the faceAttrMat in dataCheckSurfaceMesh
dataCheckSurfaceMesh();
if(getErrorCondition() < 0) { return; }
#ifdef SIMPLib_USE_PARALLEL_ALGORITHMS
tbb::task_scheduler_init init;
bool doParallel = true;
#endif
size_t totalPhases = m_CrystalStructuresPtr.lock()->getNumberOfTuples();
size_t totalFaces = m_SurfaceMeshFaceLabelsPtr.lock()->getNumberOfTuples();
size_t faceChunkSize = 50000;
size_t numMisoReps = 576 * 4;
if (totalFaces < faceChunkSize) { faceChunkSize = totalFaces; }
// call the sizeGBCD function with proper chunkSize and numMisoReps to get Bins array set up properly
sizeGBCD(faceChunkSize, numMisoReps);
int32_t totalGBCDBins = m_GbcdSizes[0] * m_GbcdSizes[1] * m_GbcdSizes[2] * m_GbcdSizes[3] * m_GbcdSizes[4] * 2;
uint64_t millis = QDateTime::currentMSecsSinceEpoch();
uint64_t currentMillis = millis;
uint64_t startMillis = millis;
uint64_t estimatedTime = 0;
float timeDiff = 0.0f;
startMillis = QDateTime::currentMSecsSinceEpoch();
int32_t hemisphere = 0;
//create an array to hold the total face area for each phase and initialize the array to 0.0
DoubleArrayType::Pointer totalFaceAreaPtr = DoubleArrayType::CreateArray(totalPhases, "totalFaceArea");
totalFaceAreaPtr->initializeWithValue(0.0);
double* totalFaceArea = totalFaceAreaPtr->getPointer(0);
QString ss = QObject::tr("Calculating GBCD || 0/%1 Completed").arg(totalFaces);
for (size_t i = 0; i < totalFaces; i = i + faceChunkSize)
{
if(getCancel() == true) { return; }
if (i + faceChunkSize >= totalFaces)
{
faceChunkSize = totalFaces - i;
}
m_GbcdBinsArray->initializeWithValue(-1);
#ifdef SIMPLib_USE_PARALLEL_ALGORITHMS
if (doParallel == true)
{
tbb::parallel_for(tbb::blocked_range<size_t>(i, i + faceChunkSize),
CalculateGBCDImpl(i, numMisoReps, m_SurfaceMeshFaceLabelsPtr.lock(), m_SurfaceMeshFaceNormalsPtr.lock(), m_FeatureEulerAnglesPtr.lock(), m_FeaturePhasesPtr.lock(), m_CrystalStructuresPtr.lock(), m_GbcdBinsArray, m_GbcdHemiCheckArray, m_GbcdDeltasArray, m_GbcdSizesArray, m_GbcdLimitsArray), tbb::auto_partitioner());
}
else
#endif
{
CalculateGBCDImpl serial(i, numMisoReps, m_SurfaceMeshFaceLabelsPtr.lock(), m_SurfaceMeshFaceNormalsPtr.lock(), m_FeatureEulerAnglesPtr.lock(), m_FeaturePhasesPtr.lock(), m_CrystalStructuresPtr.lock(), m_GbcdBinsArray, m_GbcdHemiCheckArray, m_GbcdDeltasArray, m_GbcdSizesArray, m_GbcdLimitsArray);
serial.generate(i, i + faceChunkSize);
}
currentMillis = QDateTime::currentMSecsSinceEpoch();
if (currentMillis - millis > 1000)
{
QString ss = QObject::tr("Calculating GBCD || Triangles %1/%2 Completed").arg(i).arg(totalFaces);
timeDiff = ((float)i / (float)(currentMillis - startMillis));
estimatedTime = (float)(totalFaces - i) / timeDiff;
ss = ss + QObject::tr(" || Est. Time Remain: %1").arg(DREAM3D::convertMillisToHrsMinSecs(estimatedTime));
millis = QDateTime::currentMSecsSinceEpoch();
notifyStatusMessage(getMessagePrefix(), getHumanLabel(), ss);
}
if(getCancel() == true) { return; }
int32_t phase = 0;
int32_t feature = 0;
double area = 0.0;
for (size_t j = 0; j < faceChunkSize; j++)
{
area = m_SurfaceMeshFaceAreas[i + j];
feature = m_SurfaceMeshFaceLabels[2 * (i + j)];
phase = m_FeaturePhases[feature];
for (size_t k = 0; k < numMisoReps; k++)
{
if (m_GbcdBins[(j * numMisoReps) + (k)] >= 0)
{
hemisphere = 0;
if (m_HemiCheck[(j * numMisoReps) + k] == false) { hemisphere = 1; }
m_GBCD[(phase * totalGBCDBins) + (2 * m_GbcdBins[(j * numMisoReps) + (k)] + hemisphere)] += area;
totalFaceArea[phase] += area;
}
}
}
}
ss = QObject::tr("Starting GBCD Normalization");
notifyStatusMessage(getMessagePrefix(), getHumanLabel(), ss);
for (int32_t i = 0; i < totalPhases; i++)
{
size_t phaseShift = i * totalGBCDBins;
double MRDfactor = double(totalGBCDBins) / totalFaceArea[i];
for (int32_t j = 0; j < totalGBCDBins; j++)
{
m_GBCD[phaseShift + j] *= MRDfactor;
}
}
/* Let the GUI know we are done with this filter */
notifyStatusMessage(getHumanLabel(), "Complete");
}
void generate(size_t start, size_t end) const
{
// We want to work with the raw pointers for speed so get those pointers.
float* m_GBCDdeltas = m_GbcdDeltasArray->getPointer(0);
float* m_GBCDlimits = m_GbcdLimitsArray->getPointer(0);
int* m_GBCDsizes = m_GbcdSizesArray->getPointer(0);
int32_t* m_Bins = m_GbcdBinsArray->getPointer(0);
bool* m_HemiCheck = m_GbcdHemiCheckArray->getPointer(0);
int32_t* m_Labels = m_LabelsArray->getPointer(0);
double* m_Normals = m_NormalsArray->getPointer(0);
int32_t* m_Phases = m_PhasesArray->getPointer(0);
float* m_Eulers = m_EulersArray->getPointer(0);
uint32_t* m_CrystalStructures = m_CrystalStructuresArray->getPointer(0);
int32_t j = 0;//, j4;
int32_t k = 0;//, k4;
int32_t m = 0;
int32_t temp = 0;
//bool gbcd_indices_good;
int32_t feature1 = 0, feature2 = 0;
int32_t inversion = 1;
float g1ea[3] = { 0.0f, 0.0f, 0.0f }, g2ea[3] = { 0.0f, 0.0f, 0.0f };
float g1[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } }, g2[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float g1s[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } }, g2s[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float sym1[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } }, sym2[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float g2t[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } }, dg[3][3] = { { 0.0f, 0.0f, 0.0f }, { 0.0f, 0.0f, 0.0f } };
float euler_mis[3] = { 0.0f, 0.0f, 0.0f };
float normal[3] = { 0.0f, 0.0f, 0.0f };
float xstl1_norm1[3] = { 0.0f, 0.0f, 0.0f };
int32_t gbcd_index = 0;
float sqCoord[2] = { 0.0f, 0.0f }, sqCoordInv[2] = { 0.0f, 0.0f };
bool nhCheck = false, nhCheckInv = true;
int32_t SYMcounter = 0;
int64_t TRIcounter = static_cast<int64_t>(start - startOffset);
int64_t TRIcounterShift = 0;
for (size_t i = start; i < end; i++)
{
SYMcounter = 0;
feature1 = m_Labels[2 * i];
feature2 = m_Labels[2 * i + 1];
normal[0] = m_Normals[3 * i];
normal[1] = m_Normals[3 * i + 1];
normal[2] = m_Normals[3 * i + 2];
if (feature1 < 0 || feature2 < 0) { continue; }
if (m_Phases[feature1] == m_Phases[feature2] && m_Phases[feature1] > 0)
{
TRIcounterShift = (TRIcounter * numEntriesPerTri);
uint32_t cryst = m_CrystalStructures[m_Phases[feature1]];
for (int32_t q = 0; q < 2; q++)
{
if (q == 1)
{
temp = feature1;
feature1 = feature2;
feature2 = temp;
normal[0] = -normal[0];
normal[1] = -normal[1];
normal[2] = -normal[2];
}
for (m = 0; m < 3; m++)
{
g1ea[m] = m_Eulers[3 * feature1 + m];
g2ea[m] = m_Eulers[3 * feature2 + m];
}
FOrientArrayType om(9, 0.0f);
FOrientTransformsType::eu2om(FOrientArrayType(g1ea, 3), om);
om.toGMatrix(g1);
FOrientTransformsType::eu2om(FOrientArrayType(g2ea, 3), om);
om.toGMatrix(g2);
int32_t nsym = m_OrientationOps[cryst]->getNumSymOps();
for (j = 0; j < nsym; j++)
{
// rotate g1 by symOp
m_OrientationOps[cryst]->getMatSymOp(j, sym1);
MatrixMath::Multiply3x3with3x3(sym1, g1, g1s);
// get the crystal directions along the triangle normals
MatrixMath::Multiply3x3with3x1(g1s, normal, xstl1_norm1);
// get coordinates in square projection of crystal normal parallel to boundary normal
nhCheck = getSquareCoord(xstl1_norm1, sqCoord);
if (inversion == 1)
{
sqCoordInv[0] = -sqCoord[0];
sqCoordInv[1] = -sqCoord[1];
if (nhCheck == false) { nhCheckInv = true; }
else { nhCheckInv = false; }
}
for (k = 0; k < nsym; k++)
{
// calculate the symmetric misorienation
m_OrientationOps[cryst]->getMatSymOp(k, sym2);
// rotate g2 by symOp
MatrixMath::Multiply3x3with3x3(sym2, g2, g2s);
// transpose rotated g2
MatrixMath::Transpose3x3(g2s, g2t);
// calculate delta g
MatrixMath::Multiply3x3with3x3(g1s, g2t, dg);
// translate matrix to euler angles
FOrientArrayType om(dg);
FOrientArrayType eu(euler_mis, 3);
FOrientTransformsType::om2eu(om, eu);
if (euler_mis[0] < SIMPLib::Constants::k_PiOver2 && euler_mis[1] < SIMPLib::Constants::k_PiOver2 && euler_mis[2] < SIMPLib::Constants::k_PiOver2)
{
// PHI euler angle is stored in GBCD as cos(PHI)
euler_mis[1] = cosf(euler_mis[1]);
//get the indexes that this point would be in the GBCD histogram
gbcd_index = GBCDIndex(m_GBCDdeltas, m_GBCDsizes, m_GBCDlimits, euler_mis, sqCoord);
if (gbcd_index != -1)
{
m_HemiCheck[TRIcounterShift + SYMcounter] = nhCheck;
m_Bins[TRIcounterShift + SYMcounter] = gbcd_index;
}
SYMcounter++;
if (inversion == 1)
{
gbcd_index = GBCDIndex(m_GBCDdeltas, m_GBCDsizes, m_GBCDlimits, euler_mis, sqCoordInv);
if (gbcd_index != -1)
{
m_HemiCheck[TRIcounterShift + SYMcounter] = nhCheckInv;
m_Bins[TRIcounterShift + SYMcounter] = gbcd_index;
}
SYMcounter++;
}
}
else { SYMcounter += 2; }
}
}
}
}
TRIcounter++;
}
}
/**
* @brief ConvertData Templated function that converts an IDataArray to a given primitive type
* @param ptr IDataArray instance pointer
* @param dims Component dimensions
* @param m DataContainer instance pointer
* @param scalarType Primitive type to convert to
* @param attributeMatrixName Name of target AttributeMatrix
* @param name Name of converted array
*/
void ConvertData(T* ptr, QVector<size_t> dims, DataContainer::Pointer m, int32_t scalarType, const QString attributeMatrixName, const QString& name)
{
int voxels = ptr->getNumberOfTuples();
size_t size = ptr->getSize();
if (scalarType == Detail::Int8)
{
Int8ArrayType::Pointer p = Int8ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::UInt8)
{
UInt8ArrayType::Pointer p = UInt8ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::Int16)
{
Int16ArrayType::Pointer p = Int16ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::UInt16)
{
UInt16ArrayType::Pointer p = UInt16ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::Int32)
{
Int32ArrayType::Pointer p = Int32ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::UInt32)
{
UInt32ArrayType::Pointer p = UInt32ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::Int64)
{
Int64ArrayType::Pointer p = Int64ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::UInt64)
{
UInt64ArrayType::Pointer p = UInt64ArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::Float)
{
FloatArrayType::Pointer p = FloatArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
else if (scalarType == Detail::Double)
{
DoubleArrayType::Pointer p = DoubleArrayType::CreateArray(voxels, dims, name);
m->getAttributeMatrix(attributeMatrixName)->addAttributeArray(p->getName(), p);
for(size_t v = 0; v < size; ++v)
{
p->setValue(v, ptr->getValue(v) );
}
}
}
void ConvertData(T* ptr, VoxelDataContainer* m, int32_t scalarType, const std::string &name)
{
int numberOfComponents = ptr->GetNumberOfComponents();
int voxels = ptr->GetNumberOfTuples();
size_t size = ptr->GetSize();
if (scalarType == Detail::Int8)
{
Int8ArrayType::Pointer p = Int8ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::UInt8)
{
UInt8ArrayType::Pointer p = UInt8ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::Int16)
{
Int16ArrayType::Pointer p = Int16ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::UInt16)
{
UInt16ArrayType::Pointer p = UInt16ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::Int32)
{
Int32ArrayType::Pointer p = Int32ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::UInt32)
{
UInt32ArrayType::Pointer p = UInt32ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::Int64)
{
Int64ArrayType::Pointer p = Int64ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::UInt64)
{
UInt64ArrayType::Pointer p = UInt64ArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
else if (scalarType == Detail::Float)
{
FloatArrayType::Pointer p = FloatArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
}
else if (scalarType == Detail::Double)
{
DoubleArrayType::Pointer p = DoubleArrayType::CreateArray(voxels, numberOfComponents, name);
m->addCellData(p->GetName(), p);
for(size_t v = 0; v < size; ++v)
{
p->SetValue(v, ptr->GetValue(v) );
}
}
}