// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void ConvertOrientations::execute()
{
setErrorCondition(0);
dataCheck();
if(getErrorCondition() < 0) { return; }
IDataArray::Pointer iDataArrayPtr = getDataContainerArray()->getPrereqIDataArrayFromPath<IDataArray, AbstractFilter>(this, getInputOrientationArrayPath());
DataArrayPath outputArrayPath = getInputOrientationArrayPath();
outputArrayPath.setDataArrayName(getOutputOrientationArrayName());
FloatArrayType::Pointer fArray = std::dynamic_pointer_cast<FloatArrayType>(iDataArrayPtr);
if(NULL != fArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<float>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
FloatArrayType::Pointer outData = getDataContainerArray()->getPrereqArrayFromPath<DataArray<float>, AbstractFilter>(this, outputArrayPath, outputCDims);
generateRepresentation<float>(this, fArray, outData);
}
DoubleArrayType::Pointer dArray = std::dynamic_pointer_cast<DoubleArrayType>(iDataArrayPtr);
if(NULL != dArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<double>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
DoubleArrayType::Pointer outData = getDataContainerArray()->getPrereqArrayFromPath<DataArray<double>, AbstractFilter>(this, outputArrayPath, outputCDims);
generateRepresentation<double>(this, dArray, outData);
}
notifyStatusMessage(getHumanLabel(), "Complete");
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void ConvertOrientations::dataCheck()
{
setErrorCondition(0);
if(getInputType() == getOutputType())
{
QString ss = QObject::tr("Input and output orientation representation types must be different");
setErrorCondition(-1000);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
if( getInputType() < OrientationConverter<float>::GetMinIndex() || getInputType() > OrientationConverter<float>::GetMaxIndex() )
{
QString ss = QObject::tr("There was an error with teh selection of the input orientation type. The valid values range from 0 to %1").arg(OrientationConverter<float>::GetMaxIndex());
setErrorCondition(-1001);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
if( getOutputType() < OrientationConverter<float>::GetMinIndex() || getOutputType() > OrientationConverter<float>::GetMaxIndex() )
{
QString ss = QObject::tr("There was an error with the selection of the output orientation type. The valid values range from 0 to %1").arg(OrientationConverter<float>::GetMaxIndex());
setErrorCondition(-1002);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
}
// We need to return NOW because the next lines assume we have and index that is within
// the valid bounds
if(getErrorCondition() < 0) { return; }
// Figure out what kind of Array the user selected
// Get the input data and create the output Data appropriately
IDataArray::Pointer iDataArrayPtr = getDataContainerArray()->getPrereqIDataArrayFromPath<IDataArray, AbstractFilter>(this, getInputOrientationArrayPath());
DataArrayPath outputArrayPath = getInputOrientationArrayPath();
outputArrayPath.setDataArrayName(getOutputOrientationArrayName());
FloatArrayType::Pointer fArray = std::dynamic_pointer_cast<FloatArrayType>(iDataArrayPtr);
if(NULL != fArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<float>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
getDataContainerArray()->createNonPrereqArrayFromPath<DataArray<float>, AbstractFilter, float>(this, outputArrayPath, 0, outputCDims);
}
DoubleArrayType::Pointer dArray = std::dynamic_pointer_cast<DoubleArrayType>(iDataArrayPtr);
if(NULL != dArray.get())
{
QVector<int32_t> componentCounts = OrientationConverter<double>::GetComponentCounts();
QVector<size_t> outputCDims(1, componentCounts[getOutputType()]);
getDataContainerArray()->createNonPrereqArrayFromPath<DataArray<double>, AbstractFilter, double>(this, outputArrayPath, 0, outputCDims);
}
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void StatsGenODFWidget::on_m_CalculateODFBtn_clicked()
{
int err = 0;
QwtArray<float> e1s;
QwtArray<float> e2s;
QwtArray<float> e3s;
QwtArray<float> weights;
QwtArray<float> sigmas;
QwtArray<float> odf;
SGODFTableModel* tableModel = NULL;
if(weightSpreadGroupBox->isChecked() )
{
tableModel = m_ODFTableModel;
}
else
{
tableModel = m_OdfBulkTableModel;
}
e1s = tableModel->getData(SGODFTableModel::Euler1);
e2s = tableModel->getData(SGODFTableModel::Euler2);
e3s = tableModel->getData(SGODFTableModel::Euler3);
weights = tableModel->getData(SGODFTableModel::Weight);
sigmas = tableModel->getData(SGODFTableModel::Sigma);
// Convert from Degrees to Radians
for(int i = 0; i < e1s.size(); i++)
{
e1s[i] = e1s[i] * M_PI / 180.0;
e2s[i] = e2s[i] * M_PI / 180.0;
e3s[i] = e3s[i] * M_PI / 180.0;
}
size_t numEntries = e1s.size();
int imageSize = pfImageSize->value();
int lamberSize = pfLambertSize->value();
int numColors = 16;
int npoints = pfSamplePoints->value();
QVector<size_t> dims(1, 3);
FloatArrayType::Pointer eulers = FloatArrayType::CreateArray(npoints, dims, "Eulers");
PoleFigureConfiguration_t config;
QVector<UInt8ArrayType::Pointer> figures;
if ( Ebsd::CrystalStructure::Cubic_High == m_CrystalStructure)
{
// We now need to resize all the arrays here to make sure they are all allocated
odf.resize(CubicOps::k_OdfSize);
Texture::CalculateCubicODFData(e1s.data(), e2s.data(), e3s.data(),
weights.data(), sigmas.data(), true,
odf.data(), numEntries);
err = StatsGen::GenCubicODFPlotData(odf.data(), eulers->getPointer(0), npoints);
CubicOps ops;
config.eulers = eulers.get();
config.imageDim = imageSize;
config.lambertDim = lamberSize;
config.numColors = numColors;
figures = ops.generatePoleFigure(config);
}
else if ( Ebsd::CrystalStructure::Hexagonal_High == m_CrystalStructure)
{
// We now need to resize all the arrays here to make sure they are all allocated
odf.resize(HexagonalOps::k_OdfSize);
Texture::CalculateHexODFData(e1s.data(), e2s.data(), e3s.data(),
weights.data(), sigmas.data(), true,
odf.data(), numEntries);
err = StatsGen::GenHexODFPlotData(odf.data(), eulers->getPointer(0), npoints);
HexagonalOps ops;
config.eulers = eulers.get();
config.imageDim = imageSize;
config.lambertDim = lamberSize;
config.numColors = numColors;
figures = ops.generatePoleFigure(config);
}
else if ( Ebsd::CrystalStructure::OrthoRhombic == m_CrystalStructure)
{
// // We now need to resize all the arrays here to make sure they are all allocated
odf.resize(OrthoRhombicOps::k_OdfSize);
Texture::CalculateOrthoRhombicODFData(e1s.data(), e2s.data(), e3s.data(),
weights.data(), sigmas.data(), true,
odf.data(), numEntries);
err = StatsGen::GenOrthoRhombicODFPlotData(odf.data(), eulers->getPointer(0), npoints);
OrthoRhombicOps ops;
config.eulers = eulers.get();
config.imageDim = imageSize;
config.lambertDim = lamberSize;
config.numColors = numColors;
figures = ops.generatePoleFigure(config);
}
if (err == 1)
{
//TODO: Present Error Message
return;
}
QImage image = PoleFigureImageUtilities::Create3ImagePoleFigure(figures[0].get(), figures[1].get(), figures[2].get(), config, imageLayout->currentIndex());
m_PoleFigureLabel->setPixmap(QPixmap::fromImage(image));
// Enable the MDF tab
if (m_MDFWidget != NULL)
{
m_MDFWidget->setEnabled(true);
m_MDFWidget->updateMDFPlot(odf);
}
}
// -----------------------------------------------------------------------------
//
// -----------------------------------------------------------------------------
void WritePoleFigure::execute()
{
setErrorCondition(0);
dataCheck();
if(getErrorCondition() < 0) { return; }
DataContainer::Pointer m = getDataContainerArray()->getDataContainer(m_CellPhasesArrayPath.getDataContainerName());
size_t dims[3] = { 0, 0, 0 };
m->getGeometryAs<ImageGeom>()->getDimensions(dims);
// Make sure any directory path is also available as the user may have just typed
// in a path without actually creating the full path
QDir path(getOutputPath());
if (!path.mkpath(".") )
{
QString ss = QObject::tr("Error creating parent path '%1'").arg(path.absolutePath());
setErrorCondition(-1);
notifyErrorMessage(getHumanLabel(), ss, getErrorCondition());
return;
}
bool missingGoodVoxels = true;
if (NULL != m_GoodVoxels)
{
missingGoodVoxels = false;
}
// Find how many phases we have by getting the number of Crystal Structures
size_t numPoints = m->getGeometryAs<ImageGeom>()->getNumberOfElements();
size_t numPhases = m_CrystalStructuresPtr.lock()->getNumberOfTuples();
// Loop over all the voxels gathering the Eulers for a specific phase into an array
for (size_t phase = 1; phase < numPhases; ++phase)
{
size_t count = 0;
// First find out how many voxels we are going to have. This is probably faster to loop twice than to
// keep allocating memory everytime we find one.
for (size_t i = 0; i < numPoints; ++i)
{
if (m_CellPhases[i] == phase)
{
if (missingGoodVoxels == true || m_GoodVoxels[i] == true)
{
count++;
}
}
}
QVector<size_t> eulerCompDim(1, 3);
FloatArrayType::Pointer subEulers = FloatArrayType::CreateArray(count, eulerCompDim, "Eulers_Per_Phase");
subEulers->initializeWithValue(std::numeric_limits<float>::signaling_NaN());
float* eu = subEulers->getPointer(0);
// Now loop through the eulers again and this time add them to the subEulers Array
count = 0;
for (size_t i = 0; i < numPoints; ++i)
{
if (m_CellPhases[i] == phase)
{
if (missingGoodVoxels == true || m_GoodVoxels[i] == true)
{
eu[count * 3] = m_CellEulerAngles[i * 3];
eu[count * 3 + 1] = m_CellEulerAngles[i * 3 + 1];
eu[count * 3 + 2] = m_CellEulerAngles[i * 3 + 2];
count++;
}
}
}
if (subEulers->getNumberOfTuples() == 0) { continue; } // Skip because we have no Pole Figure data
QVector<UInt8ArrayType::Pointer> figures;
PoleFigureConfiguration_t config;
config.eulers = subEulers.get();
config.imageDim = getImageSize();
config.lambertDim = getLambertSize();
config.numColors = getNumColors();
QString label("Phase_");
label.append(QString::number(phase));
QString ss = QObject::tr("Generating Pole Figures for Phase %1").arg(phase);
notifyStatusMessage(getMessagePrefix(), getHumanLabel(), ss);
switch(m_CrystalStructures[phase])
{
case Ebsd::CrystalStructure::Cubic_High:
figures = makePoleFigures<CubicOps>(config);
break;
case Ebsd::CrystalStructure::Cubic_Low:
figures = makePoleFigures<CubicLowOps>(config);
break;
case Ebsd::CrystalStructure::Hexagonal_High:
figures = makePoleFigures<HexagonalOps>(config);
break;
case Ebsd::CrystalStructure::Hexagonal_Low:
figures = makePoleFigures<HexagonalLowOps>(config);
break;
case Ebsd::CrystalStructure::Trigonal_High:
// figures = makePoleFigures<TrigonalOps>(config);
notifyWarningMessage(getHumanLabel(), "Trigonal High Symmetry is not supported for Pole figures. This phase will be omitted from results", -1010);
break;
case Ebsd::CrystalStructure::Trigonal_Low:
// figures = makePoleFigures<TrigonalLowOps>(config);
notifyWarningMessage(getHumanLabel(), "Trigonal Low Symmetry is not supported for Pole figures. This phase will be omitted from results", -1010);
break;
case Ebsd::CrystalStructure::Tetragonal_High:
// figures = makePoleFigures<TetragonalOps>(config);
notifyWarningMessage(getHumanLabel(), "Tetragonal High Symmetry is not supported for Pole figures. This phase will be omitted from results", -1010);
break;
case Ebsd::CrystalStructure::Tetragonal_Low:
// figures = makePoleFigures<TetragonalLowOps>(config);
notifyWarningMessage(getHumanLabel(), "Tetragonal Low Symmetry is not supported for Pole figures. This phase will be omitted from results", -1010);
break;
case Ebsd::CrystalStructure::OrthoRhombic:
figures = makePoleFigures<OrthoRhombicOps>(config);
break;
case Ebsd::CrystalStructure::Monoclinic:
figures = makePoleFigures<MonoclinicOps>(config);
break;
case Ebsd::CrystalStructure::Triclinic:
figures = makePoleFigures<TriclinicOps>(config);
break;
default:
break;
}
if (figures.size() == 3)
{
QImage combinedImage = PoleFigureImageUtilities::Create3ImagePoleFigure(figures[0].get(), figures[1].get(), figures[2].get(), config, getImageLayout());
writeImage(combinedImage, label);
}
}
/* Let the GUI know we are done with this filter */
notifyStatusMessage(getHumanLabel(), "Complete");
}
