int main(int argc, char *argv[])
{
if (argc != 3)
{
std::cout << "Usage: input_(lr_)spline_sf.g2 ref_lr_spline_sf.g2" << std::endl;
return -1;
}
std::ifstream filein(argv[1]); // Input (regular) spline surface.
std::ofstream fileout(argv[2]); // Output refined lr_spline_sf.
shared_ptr<Go::ParamSurface> input_sf;
Go::ObjectHeader header;
filein >> header;
shared_ptr<Go::LRSplineSurface> lr_spline_sf(new Go::LRSplineSurface());
int num_coefs_u;
int num_coefs_v;
int order_u;
int order_v;
LRSplineSurface::Refinement2D ref_v, ref_u;
// ref.d = Go::XFIXED; // Inserting a v/x knot.
ref_u.multiplicity = ref_v.multiplicity = 1;
LRSplineSurface lrsf;
double knot_tol = 1e-05;
shared_ptr<Go::SplineSurface> spline_sf(new Go::SplineSurface());
if (header.classType() == Go::Class_SplineSurface)
{
filein >> *spline_sf;
#if 0
MESSAGE("Setting parameter domain to the unit square.");
spline_sf->setParameterDomain(0.0, 1.0, 0.0, 1.0);
#endif
#if 1
// Making the input k-regular results in an error for the refinement (max_dist is 3e-03).
MESSAGE("Deactivated making the surface k-regular. Should test that for cone_sf.g2");
#else
MESSAGE("Making sure the input surface is k-regular.");
// Having some problems with a rational case (cylinder_sf.g2) ...
// Example is already k-regular.
spline_sf->makeSurfaceKRegular();
// Swpping the parameter directions does not help.
// spline_sf->swapParameterDirection();
#endif
#if 0
// We refine the input spline surface prior to converting it to the lr format.
const BsplineBasis& bas_u = spline_sf->basis_u();
const auto knots = bas_u.begin();
const int deg = bas_u.order() - 1;
double w1 = 0.5;//34;
double insert_u = w1*knots[deg] + (1.0 - w1)*knots[deg+1];
spline_sf->insertKnot_u(insert_u);
#endif
#if 0
order_u = spline_sf->order_u();
int raise_u = 0;
int raise_v = 0;
if (order_u < 4)
raise_u = 4 - order_u;
order_v = spline_sf->order_v();
if (order_v < 4)
raise_v = 4 - order_v;
if (raise_u > 0 || raise_v > 0)
spline_sf->raiseOrder(raise_u, raise_v);
#endif
num_coefs_u = spline_sf->numCoefs_u();
num_coefs_v = spline_sf->numCoefs_v();
order_u = spline_sf->order_u();
order_v = spline_sf->order_v();
input_sf = spline_sf;
puts("Now we convert from SplineSurface to LRSplineSurface!");
lr_spline_sf = shared_ptr<Go::LRSplineSurface>(new Go::LRSplineSurface(spline_sf->clone(), knot_tol));
puts("Done converting!");
std::ofstream fileout_conv("tmp/file_conv.g2");
lr_spline_sf->writeStandardHeader(fileout_conv);
lr_spline_sf->write(fileout_conv);
#ifndef NDEBUG
{
std::vector<LRBSpline2D*> bas_funcs;
for (auto iter = lr_spline_sf->basisFunctionsBegin(); iter != lr_spline_sf->basisFunctionsEnd(); ++iter)
{
bas_funcs.push_back(iter->second.get());
}
puts("Remove when done debugging!");
}
#endif
const Mesh2D& mesh = lr_spline_sf->mesh();
double umin = mesh.minParam(Go::XFIXED);
int umin_ind = mesh.getKnotIdx(Go::XFIXED, umin, knot_tol);
double w1 = 0.34; // Random value in the range (0.0, 1.0).
ref_u.kval = w1*mesh.kval(Go::XFIXED, umin_ind) + (1.0 - w1)*mesh.kval(Go::XFIXED, umin_ind + 1);
ref_u.start = mesh.minParam(Go::YFIXED);
ref_u.end = mesh.maxParam(Go::YFIXED);
ref_u.d = Go::XFIXED;
double vmin = mesh.minParam(Go::YFIXED);
int vmin_ind = mesh.getKnotIdx(Go::YFIXED, vmin, knot_tol);
double w2 = 0.72;// Random value in the range (0.0, 1.0).
ref_v.kval = w2*mesh.kval(Go::YFIXED, vmin_ind) + (1.0 - w2)*mesh.kval(Go::YFIXED, vmin_ind + 1);
ref_v.start = mesh.minParam(Go::XFIXED);
ref_v.end = mesh.maxParam(Go::XFIXED);
ref_v.d = Go::YFIXED;
}
int main(int argc, char **argv) {
#ifdef TIME_LRSPLINE
Profiler prof(argv[0]);
#endif
// set default parameter values
const double TOL = 1e-6;
const double max_n_linear_depence_testing = 1000;
int p1 = 3;
int p2 = 2;
int p3 = 4;
int n1 = 6;
int n2 = 5;
int n3 = 8;
double *knot_u = NULL;
double *knot_v = NULL;
double *knot_w = NULL;
int dim = 4;
int nDiagonals = -1;
bool rat = false;
bool dumpFile = false;
bool vol = false;
char *lrInitMesh = NULL;
char *inputFileName = NULL;
stringstream parameters;
parameters << " parameters: \n" \
" -p1 <n> polynomial ORDER (degree+1) in first parametric direction\n" \
" -p2 <n> polynomial order in second parametric direction\n" \
" -p3 <n> polynomial order in third parametric direction (only trivariate volumes)\n" \
" -n1 <n> number of basis functions in first parametric direction\n" \
" -n2 <n> number of basis functions in second parametric direction\n" \
" -n3 <n> number of basis functions in third parametric direction (only trivariate volumes)\n" \
" -knot1 <n> space-seperated list of the first knot vector (must specify n1 and p1 first)\n"\
" -knot2 <n> space-seperated list of the second knot vector (must specify n2 and p2 first)\n"\
" -knot3 <n> space-seperated list of the third knot vector (must specify n3 and p3 first)\n"\
" -dim <n> dimension of the controlpoints\n" \
" -diag <n> override inputfile and run diagonal testcase\n"\
" -in: <s> make the LRSplineSurface <s> the initial mesh\n"\
" -dumpfile writes an eps- and txt-file of the LR-mesh (bivariate surfaces only)\n"\
" -help display (this) help screen\n";
parameters << " default values\n";
parameters << " -p = { " << p1 << ", " << p2 << ", " << p3 << " }\n";
parameters << " -n = { " << n1 << ", " << n2 << ", " << n3 << " }\n";
parameters << " -vol = { " << ((vol)?"true":"false") << " }\n";
parameters << " <refine inputfile>\n"\
" inputfile describing meshline insertions.\n"\
" FORMAT:\n"\
" <numb. inserted lines>\n"\
" <is_const_u> <const_par> <start> <stop> <mult> (Surface only)\n"\
" <constParDir> <constPar> <start1> <stop1> <start2> <stop2> <mult> (Volume only)\n";
// read input
for(int i=1; i<argc; i++) {
if(strcmp(argv[i], "-p1") == 0)
p1 = atoi(argv[++i]);
else if(strcmp(argv[i], "-p2") == 0)
p2 = atoi(argv[++i]);
else if(strcmp(argv[i], "-p3") == 0) {
p3 = atoi(argv[++i]);
vol = true;
} else if(strcmp(argv[i], "-n1") == 0)
n1 = atoi(argv[++i]);
else if(strcmp(argv[i], "-n2") == 0)
n2 = atoi(argv[++i]);
else if(strcmp(argv[i], "-n3") == 0) {
n3 = atoi(argv[++i]);
vol = true;
} else if(strcmp(argv[i], "-dim") == 0)
dim = atoi(argv[++i]);
else if(strncmp(argv[i], "-in:", 4) == 0)
lrInitMesh = argv[i]+4;
else if(strcmp(argv[i], "-diag") == 0)
nDiagonals = atoi(argv[++i]);
else if(strcmp(argv[i], "-vol") == 0)
vol = true;
else if(strcmp(argv[i], "-dumpfile") == 0)
dumpFile = true;
else if(strcmp(argv[i], "-help") == 0) {
cout << "usage: " << argv[0] << "[parameters] <refine inputfile>" << endl << parameters.str();
exit(0);
} else if(strcmp(argv[i], "-knot1") == 0) {
knot_u = new double[n1+p1];
for(int j=0; j<n1+p1; j++)
knot_u[j] = atoi(argv[++i]);
} else if(strcmp(argv[i], "-knot2") == 0) {
knot_v = new double[n2+p2];
for(int j=0; j<n2+p2; j++)
knot_v[j] = atoi(argv[++i]);
} else if(strcmp(argv[i], "-knot3") == 0) {
knot_w = new double[n3+p3];
for(int j=0; j<n3+p3; j++)
knot_w[j] = atoi(argv[++i]);
} else {
if(inputFileName != NULL) {
cerr << "usage: " << argv[0] << endl << parameters.str();
exit(1);
} else {
inputFileName = argv[i];
}
}
}
// do some error testing on input
if(n1 < p1) {
cerr << "ERROR: n1 must be greater or equal to p1\n";
exit(2);
} else if(n2 < p2) {
cerr << "ERROR: n2 must be greater or equal to p2\n";
exit(2);
} else if(n3 < p3) {
cerr << "ERROR: n3 must be greater or equal to p3\n";
exit(2);
} else if(nDiagonals==-1 && inputFileName == NULL) {
cerr << "ERROR: Specify input file name\n";
cerr << "usage: " << argv[0] << "[parameters] <refine inputfile>" << endl << parameters.str();
exit(3);
}
#ifdef HAS_GOTOOLS
Go::SplineSurface *ss=nullptr;
Go::SplineVolume *sv=nullptr;
#else
LRSplineSurface *ss=nullptr;
LRSplineVolume *sv=nullptr;
#endif
LRSplineSurface *lrs=nullptr;
LRSplineVolume *lrv=nullptr;
if(lrInitMesh == NULL) {
// make a uniform integer knot vector
if(knot_u == NULL) {
knot_u = new double[n1+p1];
for(int i=0; i<p1+n1; i++)
knot_u[i] = (i<p1) ? 0 : (i>n1) ? n1-p1+1 : i-p1+1;
}
if(knot_v == NULL) {
knot_v = new double[n2+p2];
for(int i=0; i<p2+n2; i++)
knot_v[i] = (i<p2) ? 0 : (i>n2) ? n2-p2+1 : i-p2+1;
}
if(knot_w == NULL) {
knot_w = new double[n3+p3];
for(int i=0; i<p3+n3; i++)
knot_w[i] = (i<p3) ? 0 : (i>n3) ? n3-p3+1 : i-p3+1;
}
// create a list of random control points (all between 0.1 and 1.1)
int nCP = (vol) ? n1*n2*n3 : n1*n2;
nCP *= (dim+rat);
std::vector<double> cp(nCP);
int k=0;
for(int i=0; i<nCP; i++) // 839 as a generator over Z_853 gives a period of 425. Should suffice
cp[k++] = (i*839 % 853) / 853.0 + 0.1; // rational weights also random and thus we need >0
// make two spline objects (using GoTools for reference if available)
if(vol) {
#ifdef HAS_GOTOOLS
sv = new Go::SplineVolume(n1, n2, n3, p1, p2, p3, knot_u, knot_v, knot_w, cp.begin(), dim, rat);
#else
sv = new LRSplineVolume (n1, n2, n3, p1, p2, p3, knot_u, knot_v, knot_w, cp.begin(), dim, rat);
#endif
lrv = new LRSplineVolume (n1, n2, n3, p1, p2, p3, knot_u, knot_v, knot_w, cp.begin(), dim, rat);
} else {
#ifdef HAS_GOTOOLS
ss = new Go::SplineSurface(n1, n2, p1, p2, knot_u, knot_v, cp.begin(), dim, rat);
#else
ss = new LRSplineSurface (n1, n2, p1, p2, knot_u, knot_v, cp.begin(), dim, rat);
#endif
lrs = new LRSplineSurface (n1, n2, p1, p2, knot_u, knot_v, cp.begin(), dim, rat);
}
} else {
#ifdef HAS_GOTOOLS
ifstream inputfile;
inputfile.open(lrInitMesh);
if(!inputfile.is_open()) {
cerr << "Error: could not open file " << lrInitMesh << endl;
exit(3);
}
Go::ObjectHeader head;
ss = new Go::SplineSurface();
sv = new Go::SplineVolume();
inputfile >> head;
if(head.classType() == Go::Class_SplineVolume) {
vol = true;
inputfile >> *sv;
lrv = new LRSplineVolume(sv);
dim = sv->dimension();
rat = sv->rational();
n1 = sv->numCoefs(0);
n2 = sv->numCoefs(1);
n3 = sv->numCoefs(2);
p1 = sv->order(0);
p2 = sv->order(1);
p3 = sv->order(2);
} else if(head.classType() == Go::Class_SplineSurface) {
bool ObjectSet::addPatchFromStream(std::ifstream &stream, File *file)
{
Go::ObjectHeader head;
QString error = QString("%2 in '%1'").arg(file->fn());
QString logString;
try { head.read(stream); }
catch (...)
{
emit log(error.arg("Unrecognized object header"), LL_ERROR);
return false;
}
DisplayObject *obj = NULL;
DisplayObject::m.lock();
switch (head.classType())
{
case Go::Class_SplineVolume:
{
Go::SplineVolume *v = new Go::SplineVolume();
try { v->read(stream); }
catch (...)
{
emit log(error.arg("Unable to parse SplineVolume"), LL_ERROR);
delete v;
return false;
}
obj = new Volume(v);
break;
}
case Go::Class_SplineSurface:
{
Go::SplineSurface *s = new Go::SplineSurface();
try { s->read(stream); }
catch (...)
{
emit log(error.arg("Unable to parse SplineSurface"), LL_ERROR);
delete s;
return false;
}
obj = new Surface(s);
break;
}
case Go::Class_SplineCurve:
{
Go::SplineCurve *c = new Go::SplineCurve();
try { c->read(stream); }
catch (...)
{
emit log(error.arg("Unable to parse SplineCurve"), LL_ERROR);
delete c;
return false;
}
obj = new Curve(c);
break;
}
default:
emit log(error.arg(QString("Unrecognized class type %1").arg(head.classType())), LL_ERROR);
}
if (!obj)
{
DisplayObject::m.unlock();
return false;
}
m.lock();
QModelIndex index = createIndex(file->indexInParent(), 0, file);
beginInsertRows(index, file->nChildren(), file->nChildren());
Patch *patch = new Patch(obj, file);
endInsertRows();
m.unlock();
DisplayObject::m.unlock();
while (!obj->initialized())
{
emit requestInitialization(obj);
std::this_thread::sleep_for(std::chrono::milliseconds(10));
}
if (!obj->initialized())
{
emit log("Failed to initialize display object", LL_ERROR);
delete obj;
return true; // Can continue
}
emit update();
return true;
}
