Exemplo n.º 1
0
  void BCBuilder::construct_dbc_core( const GetPot& input,
                                      MultiphysicsSystem& system,
                                      const std::set<BoundaryID>& bc_ids,
                                      const FEVariablesBase& fe_var,
                                      const std::string& section,
                                      const std::string& bc_type,
                                      libMesh::DofMap& dof_map )
  {
    // Give the BC factory access to the System
    DirichletBCFactoryAbstract::set_system( system );

    // Give the BC factory access to the GetPot object
    DirichletBCFactoryAbstract::set_getpot(input);

    // Set the boundary id. This gets reset each time inside the factory.
    DirichletBCFactoryAbstract::set_bc_ids( bc_ids );

    // Set the FEVariable. This gets reset each time inside the factory.
    DirichletBCFactoryAbstract::set_fe_var( fe_var );

    // Tell the DirichletBCFactory where to parse the value of the BC,
    // if it needs to
    DirichletBCFactoryAbstract::set_section( section );

    libMesh::UniquePtr<libMesh::DirichletBoundary>
      dbc = DirichletBCFactoryAbstract::build( bc_type );

    dof_map.add_dirichlet_boundary( *dbc );
  }
	void PracticeBCHandling::user_init_dirichlet_bcs( libMesh::FEMSystem* /*system*/,
							libMesh::DofMap& dof_map,
							BoundaryID bc_id,
							BCType bc_type ) const{
	
		std::set<BoundaryID> dbc_ids;
	  dbc_ids.insert(bc_id);

	  std::vector<VariableIndex> dbc_vars;
	  dbc_vars.push_back(_c_var);
	  if(_has_zc)
	  	dbc_vars.push_back(_zc_var);
	  if(_has_fc)
	  	dbc_vars.push_back(_fc_var);
	  if(_has_auxc)
	  	dbc_vars.push_back(_aux_c_var);
	  if(_has_auxzc)
	  	dbc_vars.push_back(_aux_zc_var);
	  if(_has_auxfc)
	  	dbc_vars.push_back(_aux_fc_var);
	
    libMesh::ConstFunction<libMesh::Number> c_func(this->get_dirichlet_bc_value(bc_id));
	
	  libMesh::DirichletBoundary c_dbc( dbc_ids, dbc_vars, &c_func );
	
	  dof_map.add_dirichlet_boundary( c_dbc );	
	
	}
  void HeatTransferBCHandling::user_init_dirichlet_bcs( libMesh::FEMSystem* /*system*/,
							libMesh::DofMap& dof_map,
							BoundaryID bc_id,
							BCType bc_type ) const
  {
    switch( bc_type )
      {
      case(ISOTHERMAL_WALL):
	{
	  std::set<BoundaryID> dbc_ids;
	  dbc_ids.insert(bc_id);
	
	  std::vector<VariableIndex> dbc_vars;
	  dbc_vars.push_back(_temp_vars.T_var());
	
          libMesh::ConstFunction<libMesh::Number>
            t_func(this->get_dirichlet_bc_value(bc_id));
	
	  libMesh::DirichletBoundary t_dbc( dbc_ids, dbc_vars, &t_func );
	
	  dof_map.add_dirichlet_boundary( t_dbc );
	}
	break;
      default:
	{
	  std::cerr << "Error: Invalid Dirichlet BC type for " << _physics_name
		    << std::endl;
	  libmesh_error();
	}
      }// end switch

    return;
  }
Exemplo n.º 4
0
  void BCBuilder::add_periodic_bc_to_dofmap( libMesh::boundary_id_type master_id,
                                             libMesh::boundary_id_type slave_id,
                                             const libMesh::RealVectorValue& offset_vector,
                                             libMesh::DofMap& dof_map )
  {
    libMesh::PeriodicBoundary bc( offset_vector );
    bc.myboundary = master_id;
    bc.pairedboundary = slave_id;

    dof_map.add_periodic_boundary( bc );
  }
Exemplo n.º 5
0
  void SolidMechanicsBCHandling::user_init_dirichlet_bcs( libMesh::FEMSystem* system,
                                                          libMesh::DofMap& dof_map,
                                                          BoundaryID bc_id,
                                                          BCType bc_type ) const
  {
    VariableIndex u_var = _disp_vars.u_var();
    libmesh_assert(system->has_variable(_disp_vars.u_var_name()));

    VariableIndex v_var;
    if( _disp_vars.have_v() )
      {
        v_var = _disp_vars.v_var();
        libmesh_assert(system->has_variable(_disp_vars.v_var_name()));
      }

    VariableIndex w_var;
    if( _disp_vars.have_w() )
      {
        w_var = _disp_vars.w_var();
        libmesh_assert(system->has_variable(_disp_vars.w_var_name()));
      }

    switch( bc_type )
      {
      case(PINNED):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(u_var);

          if( _disp_vars.have_v() )
            dbc_vars.push_back(v_var);

          if( _disp_vars.have_w() )
            dbc_vars.push_back(w_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

      case(CONSTANT_DISPLACEMENT):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;

          // This is inefficient, but it shouldn't matter because
          // everything gets cached on the libMesh side so it should
          // only affect performance at startup.
          {
            dbc_vars.push_back(u_var);
            libMesh::ConstFunction<libMesh::Number>
              disp_func( this->get_dirichlet_bc_value(bc_id,0) );

            libMesh::DirichletBoundary disp_dbc(dbc_ids,
                                                dbc_vars,
                                                &disp_func );

            dof_map.add_dirichlet_boundary( disp_dbc );
            dbc_vars.clear();
          }

          if( _disp_vars.have_v() )
            {
              dbc_vars.push_back(v_var);
              libMesh::ConstFunction<libMesh::Number>
                disp_func( this->get_dirichlet_bc_value(bc_id,1) );

              libMesh::DirichletBoundary disp_dbc(dbc_ids,
                                                  dbc_vars,
                                                  &disp_func );

              dof_map.add_dirichlet_boundary( disp_dbc );
              dbc_vars.clear();
            }

          if( _disp_vars.have_w() )
            {
              dbc_vars.push_back(w_var);
              libMesh::ConstFunction<libMesh::Number>
                disp_func( this->get_dirichlet_bc_value(bc_id,2) );

              libMesh::DirichletBoundary disp_dbc(dbc_ids,
                                                  dbc_vars,
                                                  &disp_func );

              dof_map.add_dirichlet_boundary( disp_dbc );
            }
        }
        break;

        // Roller is free to move in the x-direction, so pin y and z-directions
      case(ROLLER_X):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;

          if( _disp_vars.have_v() )
            dbc_vars.push_back(v_var);

          if( _disp_vars.have_w() )
            dbc_vars.push_back(w_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

        // Roller is free to move in the y-direction, so pin x and z-directions
      case(ROLLER_Y):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(u_var);

          if( _disp_vars.have_w() )
            dbc_vars.push_back(w_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

        // Roller is free to move in the z-direction, so pin x and y-directions
      case(ROLLER_Z):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(u_var);
          dbc_vars.push_back(v_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

        // Symmetric about YZ-plane so pin x-direction
      case(SYMMETRY_YZ):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(u_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

        // Symmetric about XZ-plane so pin y-direction
      case(SYMMETRY_XZ):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(v_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

        // Symmetric about XY-plane so pin z-direction
      case(SYMMETRY_XY):
        {
          std::set<BoundaryID> dbc_ids;
          dbc_ids.insert(bc_id);

          std::vector<VariableIndex> dbc_vars;
          dbc_vars.push_back(w_var);

          libMesh::ZeroFunction<libMesh::Number> zero;

          libMesh::DirichletBoundary no_slip_dbc(dbc_ids,
                                                 dbc_vars,
                                                 &zero );

          dof_map.add_dirichlet_boundary( no_slip_dbc );
        }
        break;

      default:
        {
          std::cerr << "Invalid BCType " << bc_type << std::endl;
          libmesh_error();
        }

      }// end switch

    return;
  }