lldb_private::Status PlatformAppleSimulator::LaunchProcess(
lldb_private::ProcessLaunchInfo &launch_info) {
#if defined(__APPLE__)
LoadCoreSimulator();
CoreSimulatorSupport::Device device(GetSimulatorDevice());
if (device.GetState() != CoreSimulatorSupport::Device::State::Booted) {
Status boot_err;
device.Boot(boot_err);
if (boot_err.Fail())
return boot_err;
}
auto spawned = device.Spawn(launch_info);
if (spawned) {
launch_info.SetProcessID(spawned.GetPID());
return Status();
} else
return spawned.GetError();
#else
Status err;
err.SetErrorString(UNSUPPORTED_ERROR);
return err;
#endif
}
Error
GDBRemoteCommunication::StartDebugserverProcess (const char *hostname,
uint16_t in_port,
lldb_private::ProcessLaunchInfo &launch_info,
uint16_t &out_port)
{
out_port = in_port;
Error error;
// If we locate debugserver, keep that located version around
static FileSpec g_debugserver_file_spec;
char debugserver_path[PATH_MAX];
FileSpec &debugserver_file_spec = launch_info.GetExecutableFile();
// Always check to see if we have an environment override for the path
// to the debugserver to use and use it if we do.
const char *env_debugserver_path = getenv("LLDB_DEBUGSERVER_PATH");
if (env_debugserver_path)
debugserver_file_spec.SetFile (env_debugserver_path, false);
else
debugserver_file_spec = g_debugserver_file_spec;
bool debugserver_exists = debugserver_file_spec.Exists();
if (!debugserver_exists)
{
// The debugserver binary is in the LLDB.framework/Resources
// directory.
if (Host::GetLLDBPath (ePathTypeSupportExecutableDir, debugserver_file_spec))
{
debugserver_file_spec.GetFilename().SetCString(DEBUGSERVER_BASENAME);
debugserver_exists = debugserver_file_spec.Exists();
if (debugserver_exists)
{
g_debugserver_file_spec = debugserver_file_spec;
}
else
{
g_debugserver_file_spec.Clear();
debugserver_file_spec.Clear();
}
}
}
if (debugserver_exists)
{
debugserver_file_spec.GetPath (debugserver_path, sizeof(debugserver_path));
Args &debugserver_args = launch_info.GetArguments();
debugserver_args.Clear();
char arg_cstr[PATH_MAX];
// Start args with "debugserver /file/path -r --"
debugserver_args.AppendArgument(debugserver_path);
// If a host and port is supplied then use it
char host_and_port[128];
if (hostname)
{
snprintf (host_and_port, sizeof(host_and_port), "%s:%u", hostname, in_port);
debugserver_args.AppendArgument(host_and_port);
}
else
{
host_and_port[0] = '\0';
}
// use native registers, not the GDB registers
debugserver_args.AppendArgument("--native-regs");
// make debugserver run in its own session so signals generated by
// special terminal key sequences (^C) don't affect debugserver
debugserver_args.AppendArgument("--setsid");
char named_pipe_path[PATH_MAX];
named_pipe_path[0] = '\0';
bool listen = false;
if (host_and_port[0])
{
// Create a temporary file to get the stdout/stderr and redirect the
// output of the command into this file. We will later read this file
// if all goes well and fill the data into "command_output_ptr"
if (in_port == 0)
{
// Binding to port zero, we need to figure out what port it ends up
// using using a named pipe...
FileSpec tmpdir_file_spec;
if (Host::GetLLDBPath (ePathTypeLLDBTempSystemDir, tmpdir_file_spec))
{
tmpdir_file_spec.GetFilename().SetCString("debugserver-named-pipe.XXXXXX");
strncpy(named_pipe_path, tmpdir_file_spec.GetPath().c_str(), sizeof(named_pipe_path));
}
else
{
strncpy(named_pipe_path, "/tmp/debugserver-named-pipe.XXXXXX", sizeof(named_pipe_path));
}
if (::mktemp (named_pipe_path))
{
if (::mkfifo(named_pipe_path, 0600) == 0)
{
debugserver_args.AppendArgument("--named-pipe");
debugserver_args.AppendArgument(named_pipe_path);
}
}
}
else
{
listen = true;
}
}
else
{
// No host and port given, so lets listen on our end and make the debugserver
// connect to us..
error = StartListenThread ("localhost", 0);
if (error.Fail())
return error;
ConnectionFileDescriptor *connection = (ConnectionFileDescriptor *)GetConnection ();
out_port = connection->GetBoundPort(3);
assert (out_port != 0);
char port_cstr[32];
snprintf(port_cstr, sizeof(port_cstr), "localhost:%i", out_port);
// Send the host and port down that debugserver and specify an option
// so that it connects back to the port we are listening to in this process
debugserver_args.AppendArgument("--reverse-connect");
debugserver_args.AppendArgument(port_cstr);
}
const char *env_debugserver_log_file = getenv("LLDB_DEBUGSERVER_LOG_FILE");
if (env_debugserver_log_file)
{
::snprintf (arg_cstr, sizeof(arg_cstr), "--log-file=%s", env_debugserver_log_file);
debugserver_args.AppendArgument(arg_cstr);
}
const char *env_debugserver_log_flags = getenv("LLDB_DEBUGSERVER_LOG_FLAGS");
if (env_debugserver_log_flags)
{
::snprintf (arg_cstr, sizeof(arg_cstr), "--log-flags=%s", env_debugserver_log_flags);
debugserver_args.AppendArgument(arg_cstr);
}
// Close STDIN, STDOUT and STDERR. We might need to redirect them
// to "/dev/null" if we run into any problems.
launch_info.AppendCloseFileAction (STDIN_FILENO);
launch_info.AppendCloseFileAction (STDOUT_FILENO);
launch_info.AppendCloseFileAction (STDERR_FILENO);
error = Host::LaunchProcess(launch_info);
if (named_pipe_path[0])
{
File name_pipe_file;
error = name_pipe_file.Open(named_pipe_path, File::eOpenOptionRead);
if (error.Success())
{
char port_cstr[256];
port_cstr[0] = '\0';
size_t num_bytes = sizeof(port_cstr);
error = name_pipe_file.Read(port_cstr, num_bytes);
assert (error.Success());
assert (num_bytes > 0 && port_cstr[num_bytes-1] == '\0');
out_port = Args::StringToUInt32(port_cstr, 0);
name_pipe_file.Close();
}
Host::Unlink(named_pipe_path);
}
else if (listen)
{
}
else
{
// Make sure we actually connect with the debugserver...
JoinListenThread();
}
}
else
{
error.SetErrorStringWithFormat ("unable to locate " DEBUGSERVER_BASENAME );
}
return error;
}
Error
GDBRemoteCommunication::StartDebugserverProcess (const char *debugserver_url,
const char *unix_socket_name, // For handshaking
lldb_private::ProcessLaunchInfo &launch_info)
{
Error error;
// If we locate debugserver, keep that located version around
static FileSpec g_debugserver_file_spec;
// This function will fill in the launch information for the debugserver
// instance that gets launched.
launch_info.Clear();
char debugserver_path[PATH_MAX];
FileSpec &debugserver_file_spec = launch_info.GetExecutableFile();
// Always check to see if we have an environment override for the path
// to the debugserver to use and use it if we do.
const char *env_debugserver_path = getenv("LLDB_DEBUGSERVER_PATH");
if (env_debugserver_path)
debugserver_file_spec.SetFile (env_debugserver_path, false);
else
debugserver_file_spec = g_debugserver_file_spec;
bool debugserver_exists = debugserver_file_spec.Exists();
if (!debugserver_exists)
{
// The debugserver binary is in the LLDB.framework/Resources
// directory.
if (Host::GetLLDBPath (ePathTypeSupportExecutableDir, debugserver_file_spec))
{
debugserver_file_spec.GetFilename().SetCString(DEBUGSERVER_BASENAME);
debugserver_exists = debugserver_file_spec.Exists();
if (debugserver_exists)
{
g_debugserver_file_spec = debugserver_file_spec;
}
else
{
g_debugserver_file_spec.Clear();
debugserver_file_spec.Clear();
}
}
}
if (debugserver_exists)
{
debugserver_file_spec.GetPath (debugserver_path, sizeof(debugserver_path));
Args &debugserver_args = launch_info.GetArguments();
debugserver_args.Clear();
char arg_cstr[PATH_MAX];
// Start args with "debugserver /file/path -r --"
debugserver_args.AppendArgument(debugserver_path);
debugserver_args.AppendArgument(debugserver_url);
// use native registers, not the GDB registers
debugserver_args.AppendArgument("--native-regs");
// make debugserver run in its own session so signals generated by
// special terminal key sequences (^C) don't affect debugserver
debugserver_args.AppendArgument("--setsid");
if (unix_socket_name && unix_socket_name[0])
{
debugserver_args.AppendArgument("--unix-socket");
debugserver_args.AppendArgument(unix_socket_name);
}
const char *env_debugserver_log_file = getenv("LLDB_DEBUGSERVER_LOG_FILE");
if (env_debugserver_log_file)
{
::snprintf (arg_cstr, sizeof(arg_cstr), "--log-file=%s", env_debugserver_log_file);
debugserver_args.AppendArgument(arg_cstr);
}
const char *env_debugserver_log_flags = getenv("LLDB_DEBUGSERVER_LOG_FLAGS");
if (env_debugserver_log_flags)
{
::snprintf (arg_cstr, sizeof(arg_cstr), "--log-flags=%s", env_debugserver_log_flags);
debugserver_args.AppendArgument(arg_cstr);
}
// debugserver_args.AppendArgument("--log-file=/tmp/debugserver.txt");
// debugserver_args.AppendArgument("--log-flags=0x802e0e");
// We currently send down all arguments, attach pids, or attach
// process names in dedicated GDB server packets, so we don't need
// to pass them as arguments. This is currently because of all the
// things we need to setup prior to launching: the environment,
// current working dir, file actions, etc.
#if 0
// Now append the program arguments
if (inferior_argv)
{
// Terminate the debugserver args so we can now append the inferior args
debugserver_args.AppendArgument("--");
for (int i = 0; inferior_argv[i] != NULL; ++i)
debugserver_args.AppendArgument (inferior_argv[i]);
}
else if (attach_pid != LLDB_INVALID_PROCESS_ID)
{
::snprintf (arg_cstr, sizeof(arg_cstr), "--attach=%u", attach_pid);
debugserver_args.AppendArgument (arg_cstr);
}
else if (attach_name && attach_name[0])
{
if (wait_for_launch)
debugserver_args.AppendArgument ("--waitfor");
else
debugserver_args.AppendArgument ("--attach");
debugserver_args.AppendArgument (attach_name);
}
#endif
// Close STDIN, STDOUT and STDERR. We might need to redirect them
// to "/dev/null" if we run into any problems.
// launch_info.AppendCloseFileAction (STDIN_FILENO);
// launch_info.AppendCloseFileAction (STDOUT_FILENO);
// launch_info.AppendCloseFileAction (STDERR_FILENO);
error = Host::LaunchProcess(launch_info);
}
else
{
error.SetErrorStringWithFormat ("unable to locate " DEBUGSERVER_BASENAME );
}
return error;
}
lldb::ProcessSP
PlatformRemoteGDBServer::DebugProcess (lldb_private::ProcessLaunchInfo &launch_info,
lldb_private::Debugger &debugger,
lldb_private::Target *target, // Can be NULL, if NULL create a new target, else use existing one
lldb_private::Error &error)
{
lldb::ProcessSP process_sp;
if (IsRemote())
{
if (IsConnected())
{
lldb::pid_t debugserver_pid = LLDB_INVALID_PROCESS_ID;
ArchSpec remote_arch = GetRemoteSystemArchitecture();
llvm::Triple &remote_triple = remote_arch.GetTriple();
uint16_t port = 0;
if (remote_triple.getVendor() == llvm::Triple::Apple && remote_triple.getOS() == llvm::Triple::IOS)
{
// When remote debugging to iOS, we use a USB mux that always talks
// to localhost, so we will need the remote debugserver to accept connections
// only from localhost, no matter what our current hostname is
port = m_gdb_client.LaunchGDBserverAndGetPort(debugserver_pid, "127.0.0.1");
}
else
{
// All other hosts should use their actual hostname
port = m_gdb_client.LaunchGDBserverAndGetPort(debugserver_pid, NULL);
}
if (port == 0)
{
error.SetErrorStringWithFormat ("unable to launch a GDB server on '%s'", GetHostname ());
}
else
{
if (target == NULL)
{
TargetSP new_target_sp;
error = debugger.GetTargetList().CreateTarget (debugger,
NULL,
NULL,
false,
NULL,
new_target_sp);
target = new_target_sp.get();
}
else
error.Clear();
if (target && error.Success())
{
debugger.GetTargetList().SetSelectedTarget(target);
// The darwin always currently uses the GDB remote debugger plug-in
// so even when debugging locally we are debugging remotely!
process_sp = target->CreateProcess (launch_info.GetListenerForProcess(debugger), "gdb-remote", NULL);
if (process_sp)
{
char connect_url[256];
const char *override_hostname = getenv("LLDB_PLATFORM_REMOTE_GDB_SERVER_HOSTNAME");
const char *port_offset_c_str = getenv("LLDB_PLATFORM_REMOTE_GDB_SERVER_PORT_OFFSET");
int port_offset = port_offset_c_str ? ::atoi(port_offset_c_str) : 0;
const int connect_url_len = ::snprintf (connect_url,
sizeof(connect_url),
"connect://%s:%u",
override_hostname ? override_hostname : GetHostname (),
port + port_offset);
assert (connect_url_len < (int)sizeof(connect_url));
error = process_sp->ConnectRemote (NULL, connect_url);
// Retry the connect remote one time...
if (error.Fail())
error = process_sp->ConnectRemote (NULL, connect_url);
if (error.Success())
error = process_sp->Launch(launch_info);
else if (debugserver_pid != LLDB_INVALID_PROCESS_ID)
{
printf ("error: connect remote failed (%s)\n", error.AsCString());
m_gdb_client.KillSpawnedProcess(debugserver_pid);
}
}
}
}
}
else
{
error.SetErrorString("not connected to remote gdb server");
}
}
return process_sp;
}
