Exemplo n.º 1
0
Teuchos::RCP<DataTransferKit::GeometryManager<DataTransferKit::Box,long unsigned int> >
MultiAppDTKUserObjectEvaluator::createSourceGeometry( const Teuchos::RCP<const Teuchos::Comm<int> >& comm )
{
  _boxes.resize(_multi_app.numLocalApps());
  _box_ids.resize(_multi_app.numLocalApps());

  // How much to inflate each bounding box by (helps with non-matching surfaces)
  unsigned int inflation = 0.01;

  comm->barrier();

  for(unsigned int app=0; app<_multi_app.numLocalApps(); app++)
  {
    unsigned int global_app = _multi_app.firstLocalApp() + app;

    MeshTools::BoundingBox bbox = _multi_app.getBoundingBox(global_app);

    _boxes[app] = DataTransferKit::Box(bbox.min()(0), bbox.min()(1), bbox.min()(2),
                                       bbox.max()(0), bbox.max()(1), bbox.max()(2));

    _box_ids[app] = global_app;
  }

  return Teuchos::rcp( new DataTransferKit::GeometryManager<DataTransferKit::Box,GlobalOrdinal>(_boxes, _box_ids, comm, 3));

}
Exemplo n.º 2
0
void
FeatureFloodCount::FeatureData::updateBBoxExtremes(MeshTools::BoundingBox & bbox, const MeshTools::BoundingBox & rhs_bbox)
{
  for (unsigned int i = 0; i < LIBMESH_DIM; ++i)
  {
    bbox.min()(i) = std::min(bbox.min()(i), rhs_bbox.min()(i));
    bbox.max()(i) = std::max(bbox.max()(i), rhs_bbox.max()(i));
  }
}
Exemplo n.º 3
0
MeshTools::BoundingBox
MultiApp::getBoundingBox(unsigned int app)
{
  if (!_has_an_app)
    mooseError("No app for " << name() << " on processor " << _orig_rank);

  FEProblem * problem = appProblem(app);

  MPI_Comm swapped = Moose::swapLibMeshComm(_my_comm);

  MooseMesh & mesh = problem->mesh();
  MeshTools::BoundingBox bbox = MeshTools::bounding_box(mesh);

  Moose::swapLibMeshComm(swapped);

  Point min = bbox.min();
  Point max = bbox.max();

  Point inflation_amount = (max-min)*_inflation;

  Point inflated_min = min - inflation_amount;
  Point inflated_max = max + inflation_amount;

  // This is where the app is located.  We need to shift by this amount.
  Point p = position(app);

  Point shifted_min = inflated_min;
  Point shifted_max = inflated_max;

  // If the problem is RZ then we're going to invent a box that would cover the whole "3D" app
  // FIXME: Assuming all subdomains are the same coordinate system type!
  if (problem->getCoordSystem(*(problem->mesh().meshSubdomains().begin())) == Moose::COORD_RZ)
  {
    shifted_min(0) = -inflated_max(0);
    shifted_min(1) = inflated_min(1);
    shifted_min(2) = -inflated_max(0);

    shifted_max(0) = inflated_max(0);
    shifted_max(1) = inflated_max(1);
    shifted_max(2) = inflated_max(0);
  }

  // Shift them to the position they're supposed to be
  shifted_min += p;
  shifted_max += p;

  return MeshTools::BoundingBox(shifted_min, shifted_max);
}
Exemplo n.º 4
0
void
ImageSampler::setupImageSampler(MooseMesh & mesh)
{
#ifdef LIBMESH_HAVE_VTK
  // Get access to the Mesh object
  MeshTools::BoundingBox bbox = MeshTools::bounding_box(mesh.getMesh());

  // Set the dimensions from the Mesh if not set by the User
  if (_is_pars.isParamValid("dimensions"))
    _physical_dims = _is_pars.get<Point>("dimensions");

  else
  {
    _physical_dims(0) = bbox.max()(0) - bbox.min()(0);
#if LIBMESH_DIM > 1
    _physical_dims(1) = bbox.max()(1) - bbox.min()(1);
#endif
#if LIBMESH_DIM > 2
    _physical_dims(2) = bbox.max()(2) - bbox.min()(2);
#endif
  }

  // Set the origin from the Mesh if not set in the input file
  if (_is_pars.isParamValid("origin"))
    _origin = _is_pars.get<Point>("origin");
  else
  {
    _origin(0) = bbox.min()(0);
#if LIBMESH_DIM > 1
    _origin(1) = bbox.min()(1);
#endif
#if LIBMESH_DIM > 2
    _origin(2) = bbox.min()(2);
#endif
  }

  // An array of filenames, to be filled in
  std::vector<std::string> filenames;

  // The file suffix, to be determined
  std::string file_suffix;

  // Try to parse our own file range parameters.  If that fails, then
  // see if the associated Mesh is an ImageMesh and use its.  If that
  // also fails, then we have to throw an error...
  //
  // The parseFileRange method sets parameters, thus a writable reference to the InputParameters
  // object must be obtained from the warehouse. Generally, this should be avoided, but
  // this is a special case.
  if (_status != 0)
  {
    // We don't have parameters, so see if we can get them from ImageMesh
    ImageMesh * image_mesh = dynamic_cast<ImageMesh*>(&mesh);
    if (!image_mesh)
      mooseError("No file range parameters were provided and the Mesh is not an ImageMesh.");

    // Get the ImageMesh's parameters.  This should work, otherwise
    // errors would already have been thrown...
    filenames = image_mesh->filenames();
    file_suffix = image_mesh->fileSuffix();
  }
  else
  {
    // Use our own parameters (using 'this' b/c of conflicts with filenames the local variable)
    filenames = this->filenames();
    file_suffix = fileSuffix();
  }

  // Storage for the file names
  _files = vtkSmartPointer<vtkStringArray>::New();

  for (unsigned i=0; i<filenames.size(); ++i)
    _files->InsertNextValue(filenames[i]);

  // Error if no files where located
  if (_files->GetNumberOfValues() == 0)
    mooseError("No image file(s) located");


  // Read the image stack.  Hurray for VTK not using polymorphism in a
  // smart way... we actually have to explicitly create the type of
  // reader based on the file extension, using an if-statement...
  if (file_suffix == "png")
    _image = vtkSmartPointer<vtkPNGReader>::New();
  else if (file_suffix == "tiff" || file_suffix == "tif")
    _image = vtkSmartPointer<vtkTIFFReader>::New();
  else
    mooseError("Un-supported file type '" << file_suffix << "'");

  // Now that _image is set up, actually read the images
  // Indicate that data read has started
  _is_console << "Reading image(s)..." << std::endl;

  // Extract the data
  _image->SetFileNames(_files);
  _image->Update();
  _data = _image->GetOutput();
  _algorithm = _image->GetOutputPort();

  // Set the image dimensions and voxel size member variable
  int * dims = _data->GetDimensions();
  for (unsigned int i = 0; i < 3; ++i)
  {
    _dims.push_back(dims[i]);
    _voxel.push_back(_physical_dims(i)/_dims[i]);
  }

  // Set the dimensions of the image and bounding box
  _data->SetSpacing(_voxel[0], _voxel[1], _voxel[2]);
  _data->SetOrigin(_origin(0), _origin(1), _origin(2));
  _bounding_box.min() = _origin;
  _bounding_box.max() = _origin + _physical_dims;

  // Indicate data read is completed
  _is_console << "          ...image read finished" << std::endl;

  // Set the component parameter
  // If the parameter is not set then vtkMagnitude() will applied
  if (_is_pars.isParamValid("component"))
  {
    unsigned int n = _data->GetNumberOfScalarComponents();
    _component = _is_pars.get<unsigned int>("component");
    if (_component >= n)
      mooseError("'component' parameter must be empty or have a value of 0 to " << n-1);
  }
  else
    _component = 0;

  // Apply filters, the toggling on and off of each filter is handled internally
  vtkMagnitude();
  vtkShiftAndScale();
  vtkThreshold();
  vtkFlip();
#endif
}
Exemplo n.º 5
0
void
ClosePackIC::computeCircleCenters()
{
  // Determine the extents of the mesh
  MeshTools::BoundingBox bbox = MeshTools::bounding_box(_fe_problem.mesh().getMesh());
  const Point & min = bbox.min();
  const Point & max = bbox.max();


  // Create the x,y,z limits for the while loops
  Real x_min = min(0);
  Real x_max = max(0) + 2*_radius;

  Real y_min = min(1) - 2*std::sqrt(3.0)*_radius + _radius;
  Real y_max = max(1) + 2*_radius;

  // Real z_min = min(2) - 2*std::sqrt(3.0)*_radius + _radius;
  Real z_max = 0;

  // Initialize the coordinates that will be used in looping
  Real x = x_min;
  Real y = y_min;
  Real z = 0;

  // Adjust the 3D z-dimension maximum
  if (_fe_problem.mesh().dimension() == 3)
    z_max = max(2) + 2*_radius;

  // Counters for offsetting every other row column in x,y dimensions
  unsigned int i = 0;
  unsigned int j = 0;

  while (z <= z_max)
  {

    // Offset the y-coordinate by sqrt(3)*r every other loop
    if (j % 2 != 0)
      y += std::sqrt(3)*_radius/2;

    while (y <= y_max)
    {

      // Offset the x-coordinate by r every other loop
      if (i % 2 == 0)
        x += _radius;

      while (x <= x_max)
      {
        Point p(x, y, z);
        _centers.push_back(p);
        _radii.push_back(_radius);
        x += 2*_radius;
      }

      // Reset x-coord and increment y-coord
      x = x_min;
      y += std::sqrt(3.)*_radius;
      i++;
    }

    // Reset y-coord and increment z-coord
    y = y_min;
    z += std::sqrt(3.) * _radius;
    j++;
  }
}
Exemplo n.º 6
0
void
FeatureFloodCount::calculateBubbleVolumes()
{
  Moose::perf_log.push("calculateBubbleVolume()", "FeatureFloodCount");

  // Figure out which bubbles intersect the boundary if the user has enabled that capability.
  if (_compute_boundary_intersecting_volume)
  {
    // Create a std::set of node IDs which are on the boundary called all_boundary_node_ids.
    std::set<dof_id_type> all_boundary_node_ids;

    // Iterate over the boundary nodes, putting them into the std::set data structure
    MooseMesh::bnd_node_iterator
      boundary_nodes_it  = _mesh.bndNodesBegin(),
      boundary_nodes_end = _mesh.bndNodesEnd();
    for (; boundary_nodes_it != boundary_nodes_end; ++boundary_nodes_it)
    {
      BndNode * boundary_node = *boundary_nodes_it;
      all_boundary_node_ids.insert(boundary_node->_node->id());
    }

    // For each of the _maps_size BubbleData lists, determine if the set
    // of nodes includes any boundary nodes.
    for (unsigned int map_num = 0; map_num < _maps_size; ++map_num)
    {
      std::list<BubbleData>::iterator
        bubble_it = _bubble_sets[map_num].begin(),
        bubble_end = _bubble_sets[map_num].end();

      // Determine boundary intersection for each BubbleData object
      for (; bubble_it != bubble_end; ++bubble_it)
        bubble_it->_intersects_boundary = setsIntersect(all_boundary_node_ids.begin(), all_boundary_node_ids.end(),
                                                        bubble_it->_entity_ids.begin(), bubble_it->_entity_ids.end());
    }
  }

  // Size our temporary data structure
  std::vector<std::vector<Real> > bubble_volumes(_maps_size);
  for (unsigned int map_num = 0; map_num < _maps_size; ++map_num)
    bubble_volumes[map_num].resize(_bubble_sets[map_num].size());

  // Clear pre-existing values and allocate space to store the volume
  // of the boundary-intersecting grains for each variable.
  _total_volume_intersecting_boundary.clear();
  _total_volume_intersecting_boundary.resize(_maps_size);

  // Loop over the active local elements.  For each variable, and for
  // each BubbleData object, check whether a majority of the element's
  // nodes belong to that Bubble, and if so assign the element's full
  // volume to that bubble.
  const MeshBase::const_element_iterator el_end = _mesh.getMesh().active_local_elements_end();
  for (MeshBase::const_element_iterator el = _mesh.getMesh().active_local_elements_begin(); el != el_end; ++el)
  {
    Elem * elem = *el;
    unsigned int elem_n_nodes = elem->n_nodes();
    Real curr_volume = elem->volume();

    for (unsigned int map_num = 0; map_num < _maps_size; ++map_num)
    {
      std::list<BubbleData>::const_iterator
        bubble_it = _bubble_sets[map_num].begin(),
        bubble_end = _bubble_sets[map_num].end();

      for (unsigned int bubble_counter = 0; bubble_it != bubble_end; ++bubble_it, ++bubble_counter)
      {
        // Count the number of nodes on this element which are flooded.
        unsigned int flooded_nodes = 0;
        for (unsigned int node = 0; node < elem_n_nodes; ++node)
        {
          dof_id_type node_id = elem->node(node);
          if (bubble_it->_entity_ids.find(node_id) != bubble_it->_entity_ids.end())
            ++flooded_nodes;
        }

        // If a majority of the nodes for this element are flooded,
        // assign its volume to the current bubble_counter entry.
        if (flooded_nodes >= elem_n_nodes / 2)
        {
          bubble_volumes[map_num][bubble_counter] += curr_volume;

          // If the current bubble also intersects the boundary, also
          // accumlate the volume into the total volume of bubbles
          // which intersect the boundary.
          if (bubble_it->_intersects_boundary)
            _total_volume_intersecting_boundary[map_num] += curr_volume;
        }
      }
    }
  }

  // If we're calculating boundary-intersecting volumes, we have to normalize it by the
  // volume of the entire domain.
  if (_compute_boundary_intersecting_volume)
  {
    // Compute the total area using a bounding box.  FIXME: this
    // assumes the domain is rectangular and 2D, and is probably a
    // little expensive so we should only do it once if possible.
    MeshTools::BoundingBox bbox = MeshTools::bounding_box(_mesh);
    Real total_volume = (bbox.max()(0)-bbox.min()(0))*(bbox.max()(1)-bbox.min()(1));

    // Sum up the partial boundary grain volume contributions from all processors
    _communicator.sum(_total_volume_intersecting_boundary);

    // Scale the boundary intersecting grain volumes by the total domain volume
    for (unsigned int i = 0; i<_total_volume_intersecting_boundary.size(); ++i)
      _total_volume_intersecting_boundary[i] /= total_volume;
  }

  // Stick all the partial bubble volumes in one long single vector to be gathered on the root processor
  for (unsigned int map_num = 0; map_num < _maps_size; ++map_num)
    _all_bubble_volumes.insert(_all_bubble_volumes.end(), bubble_volumes[map_num].begin(), bubble_volumes[map_num].end());

  // do all the sums!
  _communicator.sum(_all_bubble_volumes);

  std::sort(_all_bubble_volumes.begin(), _all_bubble_volumes.end(), std::greater<Real>());

  Moose::perf_log.pop("calculateBubbleVolume()", "FeatureFloodCount");
}
Exemplo n.º 7
0
void dataLoad(std::istream & stream, MeshTools::BoundingBox & bbox, void * context)
{
  loadHelper(stream, bbox.min(), context);
  loadHelper(stream, bbox.max(), context);
}
Exemplo n.º 8
0
void dataStore(std::ostream & stream, MeshTools::BoundingBox & bbox, void * context)
{
  storeHelper(stream, bbox.min(), context);
  storeHelper(stream, bbox.max(), context);
}
Exemplo n.º 9
0
void
FeatureFloodCount::FeatureData::updateBBoxMax(MeshTools::BoundingBox & bbox, const Point & max)
{
  for (unsigned int i = 0; i < LIBMESH_DIM; ++i)
    bbox.max()(i) = std::max(bbox.max()(i), max(i));
}