Exemplos de State::saveInteger em C++ (Cpp)

Exemplo n.º 1

Arquivo: sample_player.cpp Projeto: nolanw/rtxiplugins

void SamplePlayer::doSave(Settings::Object::State &s) const
{
	s.saveInteger("paused", pauseButton->isOn());
	std::map<QString, param_t>::const_iterator i;
	for (i = parameter.begin(); i != parameter.end(); ++i)
		s.saveString(i->first, i->second.edit->text());
	s.saveString("filename", sampleFilename->text());
}

Exemplo n.º 2

Arquivo: io.cpp Projeto: RTXI/rtxi

void IO::Connector::doSave(Settings::Object::State &s) const
{
    size_t n = 0;

    for (std::list<Block *>::const_iterator i = blockList.begin(),iend = blockList.end(); i != iend; ++i)
        for (size_t j = 0,jend = (*i)->getCount(INPUT); j < jend; ++j)
            for (std::list<Block::link_t>::const_iterator k = (*i)->inputs[j].links.begin(),kend = (*i)->inputs[j].links.end(); k != kend; ++k)
                {
                    std::ostringstream str;
                    str << n++;
                    s.saveInteger(str.str()+" Source ID",k->block->getID());
                    s.saveInteger(str.str()+" Source channel",k->channel);
                    s.saveInteger(str.str()+" Destination ID",(*i)->getID());
                    s.saveInteger(str.str()+" Destination channel",j);
                }
    s.saveInteger("Num Links",n);
}

Exemplo n.º 3

Arquivo: IScale_DynClamp.cpp Projeto: RTXI/current-scale-dclamp

// Save Settings
void IScale_DynClamp::Module::doSave(Settings::Object::State &s) const {
	if (isMaximized()) s.saveInteger( "Maximized", 1 );
	else if (isMinimized()) s.saveInteger( "Minimized", 1 );

	QPoint pos = parentWidget()->pos();
	s.saveInteger( "X", pos.x() );
	s.saveInteger( "Y", pos.y() );
	s.saveInteger( "W", width() );
	s.saveInteger( "H", height() );
	s.saveString( "Protocol", loadedFile.toStdString() );
	s.saveInteger( "APD Repol", APDRepol );
	s.saveInteger( "Min APD", minAPD );
	s.saveInteger( "Stim Window", stimWindow );
	s.saveInteger( "Num Trials", numTrials);
	s.saveInteger( "Interval Time", intervalTime );
	s.saveDouble( "BCL", BCL );
	s.saveDouble( "Stim Mag", stimMag );
	s.saveDouble( "Stim Length", stimLength );
	s.saveDouble( "Cm", Cm );
	s.saveDouble( "LJP", LJP );
}

Exemplo n.º 4

Arquivo: am_2400_commander.cpp Projeto: fparaggio/PuggleLinux

void AM2400Commander::Panel::doSave(Settings::Object::State &s) const {
    
    s.saveInteger( "Input Channel",  ui->inputChannelSpinBox->value() );
    s.saveInteger( "Output Channel",  ui->outputChannelSpinBox->value() );
    s.saveInteger("Mode", ui->ampModeButtonGroup->selectedId() );
    
	if (isMaximized())
		s.saveInteger("Maximized", 1);
	else if (isMinimized())
		s.saveInteger("Minimized", 1);

	QPoint pos = parentWidget()->pos();
	s.saveInteger("X", pos.x());
	s.saveInteger("Y", pos.y());
	s.saveInteger("W", width());
	s.saveInteger("H", height());
}

Exemplo n.º 5

Arquivo: am-amp2400.cpp Projeto: RTXI/am-amp2400

void AMAmp::doSave(Settings::Object::State &s) const {
	s.saveInteger("paused", pauseButton->isChecked());
	if (isMaximized()) s.saveInteger("Maximized", 1);
	else if (isMinimized()) s.saveInteger("Minimized", 1);

	QPoint pos = parentWidget()->pos();
	s.saveInteger("X", pos.x());
	s.saveInteger("Y", pos.y());
	s.saveInteger("W", width());
	s.saveInteger("H", height());

	for (std::map<QString, param_t>::const_iterator i = parameter.begin(); i != parameter.end(); ++i) {
		s.saveString((i->first).toStdString(), (i->second.edit->text()).toStdString());
	}
}

Exemplo n.º 6

Arquivo: analogy_device.cpp Projeto: fparaggio/PuggleLinux

void AnalogyDevice::doSave(Settings::Object::State &s) const {
    s.saveInteger("AI Count",subdevice[AI].count);
    for(size_t i = 0;i < subdevice[AI].count;++i) {
        std::ostringstream str;
        str << i;
        s.saveInteger(str.str()+" AI Active",getChannelActive(AI,i));
        s.saveInteger(str.str()+" AI Range",getAnalogRange(AI,i));
        s.saveInteger(str.str()+" AI Reference",getAnalogReference(AI,i));
        s.saveInteger(str.str()+" AI Units",getAnalogUnits(AI,i));
        s.saveDouble(str.str()+" AI Gain",getAnalogGain(AI,i));
        s.saveDouble(str.str()+" AI Zero Offset",getAnalogZeroOffset(AI,i));
    }

    s.saveInteger("AO Count",subdevice[AO].count);
    for(size_t i = 0;i < subdevice[AO].count;++i) {
        std::ostringstream str;
        str << i;
        s.saveInteger(str.str()+" AO Active",getChannelActive(AO,i));
        s.saveInteger(str.str()+" AO Range",getAnalogRange(AO,i));
        s.saveInteger(str.str()+" AO Reference",getAnalogReference(AO,i));
        s.saveInteger(str.str()+" AO Units",getAnalogUnits(AO,i));
        s.saveDouble(str.str()+" AO Gain",getAnalogGain(AO,i));
        s.saveDouble(str.str()+" AO Gain",getAnalogZeroOffset(AO,i));
    }

    s.saveInteger("DIO Count",subdevice[DIO].count);
    for(size_t i = 0;i < subdevice[DIO].count;++i) {
        std::ostringstream str;
        str << i;
        s.saveInteger(str.str()+" DIO Active",getChannelActive(DIO,i));
        s.saveInteger(str.str()+" DIO Direction",subdevice[DIO].chan[i].digital.direction);
    }
}

Exemplo n.º 7

Arquivo: axon_axopatch200_commander.cpp Projeto: fparaggio/PuggleLinux

void Axon200Commander::Panel::doSave( Settings::Object::State &s ) const {
	if (isMaximized())
		s.saveInteger("Maximized", 1);
	else if (isMinimized())
		s.saveInteger("Minimized", 1);

	QPoint pos = parentWidget()->pos();
	s.saveInteger("X", pos.x());
	s.saveInteger("Y", pos.y());
	s.saveInteger("W", width());
	s.saveInteger("H", height());

    s.saveInteger("Input Channel", mainUI->inputChannelSpinBox->value() );
    s.saveInteger("Output Channel", mainUI->outputChannelSpinBox->value() );
    s.saveInteger("Gain", mainUI->gainComboBox->currentItem() );
    s.saveInteger("Headstage Config", mainUI->configComboBox->currentItem() );
    s.saveInteger("Mode", mainUI->ampModeButtonGroup->selectedId() );
    s.saveInteger("Auto Mode", mainUI->autoModeButton->isOn() );
}