void CmdSketcherConnect::activated(int iMsg)
{
    // get the selection
    std::vector<Gui::SelectionObject> selection = getSelection().getSelectionEx();

    // only one sketch with its subelements are allowed to be selected
    if (selection.size() != 1) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("Select at least two edges from the sketch."));
        return;
    }

    // get the needed lists and objects
    const std::vector<std::string> &SubNames = selection[0].getSubNames();
    if (SubNames.size() < 2) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
            QObject::tr("Select at least two edges from the sketch."));
        return;
    }
    Sketcher::SketchObject* Obj = dynamic_cast<Sketcher::SketchObject*>(selection[0].getObject());

    // undo command open
    openCommand("add coincident constraint");

    // go through the selected subelements
    for (unsigned int i=0; i<(SubNames.size()-1); i++ ) {
        // only handle edges
        if (SubNames[i].size() > 4 && SubNames[i].substr(0,4) == "Edge" &&
            SubNames[i+1].size() > 4 && SubNames[i+1].substr(0,4) == "Edge"	) {

            int GeoId1 = std::atoi(SubNames[i].substr(4,4000).c_str()) - 1;
            int GeoId2 = std::atoi(SubNames[i+1].substr(4,4000).c_str()) - 1;

            const Part::Geometry *geo1 = Obj->getGeometry(GeoId1);
            const Part::Geometry *geo2 = Obj->getGeometry(GeoId2);
            if ((geo1->getTypeId() != Part::GeomLineSegment::getClassTypeId() &&
                geo1->getTypeId() != Part::GeomArcOfCircle::getClassTypeId()) ||
                (geo2->getTypeId() != Part::GeomLineSegment::getClassTypeId() &&
                geo2->getTypeId() != Part::GeomArcOfCircle::getClassTypeId())) {
                QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Impossible constraint"),
                      QObject::tr("One selected edge is not connectable"));
                abortCommand();
                return;
            }

            Gui::Command::doCommand(
                Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('Coincident',%d,%d,%d,%d)) ",
                selection[0].getFeatName(),GeoId1,Sketcher::end,GeoId2,Sketcher::start);
        }
    }

    // finish the transaction and update
    commitCommand();
    updateActive();

    // clear the selection (convenience)
    getSelection().clearSelection();
}
Exemplo n.º 2
0
void CmdSketcherIncreaseDegree::activated(int iMsg)
{
    Q_UNUSED(iMsg);

    // get the selection
    std::vector<Gui::SelectionObject> selection;
    selection = getSelection().getSelectionEx(0, Sketcher::SketchObject::getClassTypeId());

    // only one sketch with its subelements are allowed to be selected
    if (selection.size() != 1) {
        return;
    }

    // get the needed lists and objects
    const std::vector<std::string> &SubNames = selection[0].getSubNames();
    Sketcher::SketchObject* Obj = static_cast<Sketcher::SketchObject*>(selection[0].getObject());

    openCommand("Increase degree");
    
    bool ignored=false;

    for (unsigned int i=0; i<SubNames.size(); i++ ) {
        // only handle edges
        if (SubNames[i].size() > 4 && SubNames[i].substr(0,4) == "Edge") {

            int GeoId = std::atoi(SubNames[i].substr(4,4000).c_str()) - 1;

            const Part::Geometry * geo = Obj->getGeometry(GeoId);

            if (geo->getTypeId() == Part::GeomBSplineCurve::getClassTypeId()) {

                Gui::Command::doCommand(
                    Doc,"App.ActiveDocument.%s.increaseBSplineDegree(%d) ",
                                        selection[0].getFeatName(),GeoId);

                // add new control points
                Gui::Command::doCommand(Gui::Command::Doc,
                                        "App.ActiveDocument.%s.exposeInternalGeometry(%d)",
                                        selection[0].getFeatName(),
                                        GeoId);
            }
            else {
                ignored=true;
            }
        }
    }

    if(ignored) {
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
                             QObject::tr("At least one of the selected objects was not a B-Spline and was ignored."));
    }

    commitCommand();

    tryAutoRecomputeIfNotSolve(Obj);

    getSelection().clearSelection();
}
Exemplo n.º 3
0
void DrawSketchHandler::createAutoConstraints(const std::vector<AutoConstraint> &autoConstrs,
                                              int geoId1, Sketcher::PointPos posId1)
{
    if (!sketchgui->Autoconstraints.getValue())
        return; // If Autoconstraints property is not set quit

    if (autoConstrs.size() > 0) {
        // Open the Command
        Gui::Command::openCommand("Add auto constraints");

        // Iterate through constraints
        std::vector<AutoConstraint>::const_iterator it = autoConstrs.begin();
        for (; it != autoConstrs.end(); ++it) {
            switch (it->Type)
            {
            case Sketcher::Coincident: {
                if (posId1 == Sketcher::none)
                    continue;
                // If the auto constraint has a point create a coincident otherwise it is an edge on a point
                Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('Coincident',%i,%i,%i,%i)) "
                                        ,sketchgui->getObject()->getNameInDocument()
                                        ,geoId1, posId1, it->GeoId, it->PosId
                                        );
                } break;
            case Sketcher::PointOnObject: {
                int geoId2 = it->GeoId;
                Sketcher::PointPos posId2 = it->PosId;
                if (posId1 == Sketcher::none) {
                    // Auto constraining an edge so swap parameters
                    std::swap(geoId1,geoId2);
                    std::swap(posId1,posId2);
                }

                Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('PointOnObject',%i,%i,%i)) "
                                        ,sketchgui->getObject()->getNameInDocument()
                                        ,geoId1, posId1, geoId2
                                       );
                } break;
            case Sketcher::Horizontal: {
                
                bool start_external;
                bool mid_external;
                bool end_external;
                
                static_cast<Sketcher::SketchObject*>((sketchgui->getObject()))->isCoincidentWithExternalGeometry(geoId1, start_external, mid_external, end_external);
                
                if( !(start_external && end_external) ) {
                    Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('Horizontal',%i)) "
                    ,sketchgui->getObject()->getNameInDocument()
                    ,geoId1
                    );
                }

                } break;
            case Sketcher::Vertical: {
                
                bool start_external;
                bool mid_external;
                bool end_external;
                
                static_cast<Sketcher::SketchObject*>((sketchgui->getObject()))->isCoincidentWithExternalGeometry(geoId1, start_external, mid_external, end_external);
                
                if( !(start_external && end_external) ) {
                    Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('Vertical',%i)) "
                    ,sketchgui->getObject()->getNameInDocument()
                    ,geoId1
                    );
                }
                
                } break;
            case Sketcher::Tangent: {
                Sketcher::SketchObject* Obj = static_cast<Sketcher::SketchObject*>(sketchgui->getObject());
                
                const Part::Geometry *geom1 = Obj->getGeometry(geoId1);
                const Part::Geometry *geom2 = Obj->getGeometry(it->GeoId);
                
                int geoId2 = it->GeoId;
                
                // ellipse tangency support using construction elements (lines)
                if( geom1 && geom2 && 
                    ( geom1->getTypeId() == Part::GeomEllipse::getClassTypeId() ||
                    geom2->getTypeId() == Part::GeomEllipse::getClassTypeId() )){
                    
                    if(geom1->getTypeId() != Part::GeomEllipse::getClassTypeId())
                        std::swap(geoId1,geoId2);
            
                    // geoId1 is the ellipse
                    geom1 = Obj->getGeometry(geoId1);
                    geom2 = Obj->getGeometry(geoId2);                
            
                    if( geom2->getTypeId() == Part::GeomEllipse::getClassTypeId() ||
                        geom2->getTypeId() == Part::GeomArcOfEllipse::getClassTypeId() ||
                        geom2->getTypeId() == Part::GeomCircle::getClassTypeId() ||
                        geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() ) {
                        // in all these cases an intermediate element is needed
                        makeTangentToEllipseviaNewPoint(Obj,geom1,geom2,geoId1,geoId2);
                        return;
                    }
                }
                
                // arc of ellipse tangency support using external elements
                if( geom1 && geom2 && 
                    ( geom1->getTypeId() == Part::GeomArcOfEllipse::getClassTypeId() ||
                    geom2->getTypeId() == Part::GeomArcOfEllipse::getClassTypeId() )){
                    
                    if(geom1->getTypeId() != Part::GeomArcOfEllipse::getClassTypeId())
                        std::swap(geoId1,geoId2);
            
                    // geoId1 is the arc of ellipse
                    geom1 = Obj->getGeometry(geoId1);
                    geom2 = Obj->getGeometry(geoId2);                
            
                    if( geom2->getTypeId() == Part::GeomArcOfEllipse::getClassTypeId() ||
                        geom2->getTypeId() == Part::GeomCircle::getClassTypeId() ||
                        geom2->getTypeId() == Part::GeomArcOfCircle::getClassTypeId() ) {
                        // in all these cases an intermediate element is needed
                        makeTangentToArcOfEllipseviaNewPoint(Obj,geom1,geom2,geoId1,geoId2);
                        return;
                    }
                }
            
                Gui::Command::doCommand(Gui::Command::Doc,"App.ActiveDocument.%s.addConstraint(Sketcher.Constraint('Tangent',%i, %i)) "
                                        ,sketchgui->getObject()->getNameInDocument()
                                        ,geoId1, it->GeoId
                                       );
                } break;
            default:
                break;
            }

            Gui::Command::commitCommand();
            //Gui::Command::updateActive(); // There is already an recompute in each command creation, this is redundant.
        }
    }
}
Exemplo n.º 4
0
void CmdSketcherDecreaseKnotMultiplicity::activated(int iMsg)
{
    Q_UNUSED(iMsg);
    
    #if OCC_VERSION_HEX < 0x060900
    QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong OCE/OCC version"),
                         QObject::tr("This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher"));
    return;
    #endif
    
    // get the selection
    std::vector<Gui::SelectionObject> selection;
    selection = getSelection().getSelectionEx(0, Sketcher::SketchObject::getClassTypeId());

    // only one sketch with its subelements are allowed to be selected
    if (selection.size() != 1) {
        return;
    }
    
    // get the needed lists and objects
    const std::vector<std::string> &SubNames = selection[0].getSubNames();
    
    if(SubNames.size()>1) {
        // Check that only one object is selected, as we need only one object to get the new GeoId after multiplicity change
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
                             QObject::tr("The selection comprises more than one item. Please select just one knot."));
        return;
    }
    
    Sketcher::SketchObject* Obj = static_cast<Sketcher::SketchObject*>(selection[0].getObject());
    
    openCommand("Decrease knot multiplicity");
    
    bool applied = false;
    bool notaknot = true;
    
    boost::uuids::uuid bsplinetag;
    
    int GeoId;
    Sketcher::PointPos PosId;
    getIdsFromName(SubNames[0], Obj, GeoId, PosId);
    
    if(isSimpleVertex(Obj, GeoId, PosId)) {
        
        const std::vector< Sketcher::Constraint * > &vals = Obj->Constraints.getValues();
        
        for (std::vector< Sketcher::Constraint * >::const_iterator it= vals.begin(); it != vals.end(); ++it) {
            if((*it)->Type == Sketcher::InternalAlignment && (*it)->First == GeoId && (*it)->AlignmentType == Sketcher::BSplineKnotPoint)
            {
                bsplinetag = Obj->getGeometry((*it)->Second)->getTag();
                
                notaknot = false;
                
                try {
                    Gui::Command::doCommand(
                        Doc,"App.ActiveDocument.%s.modifyBSplineKnotMultiplicity(%d,%d,%d) ",
                                            selection[0].getFeatName(),(*it)->Second, (*it)->InternalAlignmentIndex + 1, -1);
                    
                    applied = true;
                    
                    // Warning: GeoId list might have changed as the consequence of deleting pole circles and
                    // particularly B-spline GeoID might have changed.
                    
                }
                catch (const Base::Exception& e) {
                    QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Error"),
                                         QObject::tr(getStrippedPythonExceptionString(e).c_str()));
                    getSelection().clearSelection();
                }
                
                break; // we have already found our knot.
                
            }
        }
        
    }
    
    if(notaknot){
        QMessageBox::warning(Gui::getMainWindow(), QObject::tr("Wrong selection"),
                             QObject::tr("None of the selected elements is a knot of a B-spline"));
    }    
    
    if(applied)
    {
        // find new geoid for B-spline as GeoId might have changed
        const std::vector< Part::Geometry * > &gvals = Obj->getInternalGeometry();
        
        int ngeoid = 0;
        bool ngfound = false;
        
        for (std::vector<Part::Geometry *>::const_iterator geo = gvals.begin(); geo != gvals.end(); geo++, ngeoid++) {
            if ((*geo) && (*geo)->getTag() == bsplinetag) {
                ngfound = true;
                break;
            }
        }
            

        if(ngfound) {
            try {
                // add internalalignment for new pole
                Gui::Command::doCommand(Gui::Command::Doc,
                                        "App.ActiveDocument.%s.exposeInternalGeometry(%d)",
                                        selection[0].getFeatName(),
                                        ngeoid);
            }
            catch (const Base::Exception& e) {
                Base::Console().Error("%s\n", e.what());
                getSelection().clearSelection();
            }

        }
    }
    
    if(!applied) {
        abortCommand();
    }
    else {
        commitCommand();
    }

    tryAutoRecomputeIfNotSolve(Obj);

    getSelection().clearSelection();
}