bool DumpRenderTreeSupportQt::shouldClose(QWebFrame* frame)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
return coreFrame->loader()->shouldClose();
}
QString DumpRenderTreeSupportQt::layerTreeAsText(QWebFrame* frame)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
return coreFrame->layerTreeAsText();
}
void DumpRenderTreeSupportQt::scalePageBy(QWebFrame* frame, float scalefactor, const QPoint& origin)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
coreFrame->scalePage(scalefactor, origin);
}
void DumpRenderTreeSupportQt::scalePageBy(QWebFrame* frame, float scalefactor, const QPoint& origin)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
if (Page* page = coreFrame->page())
page->setPageScaleFactor(scalefactor, origin);
}
void DumpRenderTreeSupportQt::clearOpener(QWebFrame* frame)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
coreFrame->loader()->setOpener(0);
}
void DocumentNavigator::FindBestNode(WebCore::Node* rootNode)
{
// Note by Arpit Baldeva - Changed the recursive algorithm to an iterative algorithm. This results in 25% to 40% increase in efficiency.
while (rootNode)
{
IsNodeNavigableDelegate nodeNavigableDelegate(mView);
// As it turns out, getRect on HTMLElement is pretty expensive. So we don't do it inside the delegate as we require getRect here too. We do that check here.
// It is at least ~15% more efficient and can be up to ~25% more efficient (depends on the page layout and current node you are at).
nodeNavigableDelegate(rootNode,false);
if (nodeNavigableDelegate.FoundNode())
{
WebCore::HTMLElement* htmlElement = (WebCore::HTMLElement*) rootNode;
WebCore::IntRect rectAbsolute = htmlElement->getRect();
// Adjust the rectangle position based on the frame offset so that we have absolute geometrical position.
WebCore::FrameView* pFrameView = htmlElement->document()->view(); //Can be NULL
if(pFrameView)
{
rectAbsolute.setX(rectAbsolute.x() + pFrameView->x());
rectAbsolute.setY(rectAbsolute.y() + pFrameView->y());
}
/* printf("Looking at ELEMENT_NODE : nodeName=%S (%d,%d)->(%d,%d) ThetaRange(%f,%f)\n\n%S\n-----------------------------------\n",
htmlElement->tagName().charactersWithNullTermination(),
rect.topLeft().x(),rect.topLeft().y(),
rect.bottomRight().x(), rect.bottomRight().y(),
mMinThetaRange,mMaxThetaRange,
htmlElement->innerHTML().charactersWithNullTermination()
);
*/
if (!WouldBeTrappedInElement(rectAbsolute,mStartingPosition,mDirection))
{
if (!TryingToDoPerpendicularJump(rectAbsolute,mPreviousNodeRect,mDirection))
{
if(rectAbsolute.width()>=1 && rectAbsolute.height() >= 1) //Avoid 0 size elements
{
if (doAxisCheck(rectAbsolute))
{
PolarRegion pr(rectAbsolute, mStartingPosition);
if (pr.minR < mMinR )
{
if (areAnglesInRange(pr.minTheta,pr.maxTheta))
{
mMinR = pr.minR;
EAW_ASSERT( *(uint32_t*)rootNode > 10000000u );
//mBestNode = rootNode; //We don't assign it here since we do the Z-layer testing later on.
FoundNodeInfo foundNodeInfo = {rootNode, mMinR};
mNodeListContainer->mFoundNodes.push_back(foundNodeInfo);
/*printf("Found ELEMENT_NODE : nodeName=%s (%d,%d)->(%d,%d) polar: R(%f,%f) Theta(%f,%f) ThetaRange(%f,%f) \n",
(char*)htmlElement->nodeName().characters(),
rect.topLeft().x(),rect.topLeft().y(),
rect.bottomRight().x(), rect.bottomRight().y(),
pr.minR,pr.maxR,pr.minTheta,pr.maxTheta,
mMinThetaRange,mMaxThetaRange
);*/
}
else
{
#if EAWEBKIT_ENABLE_JUMP_NAVIGATION_DEBUGGING
mNodeListContainer->mRejectedByAngleNodes.push_back(rootNode);
#endif
/*printf("RejectedA ELEMENT_NODE : nodeName=%s (%d,%d)->(%d,%d) polar: R(%f,%f) Theta(%f,%f) ThetaRange(%f,%f) \n",
(char*)htmlElement->nodeName().characters(),
rect.topLeft().x(),rect.topLeft().y(),
rect.bottomRight().x(), rect.bottomRight().y(),
pr.minR,pr.maxR,pr.minTheta,pr.maxTheta,
mMinThetaRange,mMaxThetaRange
);*/
}
}
else
{
#if EAWEBKIT_ENABLE_JUMP_NAVIGATION_DEBUGGING
mNodeListContainer->mRejectedByRadiusNodes.push_back(rootNode);
#endif
/*printf("RejectedR ELEMENT_NODE : nodeName=%s (%d,%d)->(%d,%d) polar: R(%f,%f) Theta(%f,%f) ThetaRange(%f,%f) \n",
(char*)htmlElement->nodeName().characters(),
rect.topLeft().x(),rect.topLeft().y(),
rect.bottomRight().x(), rect.bottomRight().y(),
pr.minR,pr.maxR,pr.minTheta,pr.maxTheta,
mMinThetaRange,mMaxThetaRange
);*/
}
}
else
{
//printf(" - failed axis check\n");
}
}
else
{
//printf(" - too small\n");
}
}
else
{
//printf(" - perpendicular\n");
}
}
else
{
#if EAWEBKIT_ENABLE_JUMP_NAVIGATION_DEBUGGING
mNodeListContainer->mRejectedWouldBeTrappedNodes.push_back(rootNode);
#endif
}
}
rootNode = rootNode->traverseNextNode();
}
// Make sure that this element can be jumped to by passing z-check. This makes sure that we jump only on the element
// at the top most layer (For example, a CSS+JavaScript pop up).
// We don't try and check against Z-layer in the loop above as it has significant performance penalty. On an average, it causes traversal to be 50% slower. So what we do
// instead is to collect all the nodes and at the end, traverse this list from the end to begining. It is important to traverse from end as that is where the most suited element is
// based on the position.
WebCore::Node* bestNode = NULL;
float radialDistance = FLT_MAX; // A high value so that the max distance between any two elements in the surface is under it.
bool matched = false;
for (WebCoreFoundNodeInfoListReverseIterator rIt = mNodeListContainer->mFoundNodes.rbegin(); rIt != mNodeListContainer->mFoundNodes.rend(); ++rIt)
{
bestNode = (*rIt).mFoundNode;
radialDistance = (*rIt).mRadialDistance;
WebCore::HTMLElement* element = (WebCore::HTMLElement*)bestNode;
WebCore::Frame* frame = element->document()->frame();
WebCore::FrameView* pFrameView = element->document()->view();
WebCore::IntRect rect = element->getRect(); //This list is decently small so we don't worry about caching the rect size.
// ElementFromPoint expects the point in its own coordinate system so we don't need to adjust the rectangle to its absolute position
// on screen
// elementFromPoint API changed compared to 1.x. The simplest thing to do at the moment is to adjust our input.
int inputX = (rect.x()+rect.width()/2 - pFrameView->scrollX())/frame->pageZoomFactor();
int inputY = (rect.y()+rect.height()/2 - pFrameView->scrollY())/frame->pageZoomFactor();
WebCore::Node* hitElement = mDocument->elementFromPoint(inputX,inputY);
while (hitElement)
{
if(bestNode == hitElement)
{
matched = true;
break;
}
hitElement = hitElement->parentNode();//We need to find the element that responds to the events as that is what we jump to. For example, we don't jump to a "span".
};
if(matched)
break;
}
if(matched)
{
mBestNode = bestNode;
mMinR = radialDistance;
}
else
{
mBestNode = 0; //We didn't match anything based on the Z-layer testing.
mMinR = FLT_MAX;
}
// A way to do Post Order traversal.
//while (WebCore::Node* firstChild = rootNode->firstChild())
// rootNode = firstChild;
//while(rootNode)
//{
// rootNode = rootNode->traverseNextNodePostOrder();
//}
/*
//////////////////////////////////////////////////////////////////////////
// THEN, FIND THE CHILDREN
if (rootNode && rootNode->childNodeCount() > 0)
{
PassRefPtr<WebCore::NodeList> children = rootNode->childNodes();
const uint32_t length = children->length();
for (uint32_t i=0; i < length; ++i)
{
WebCore::Node* child = children->item(i);
if (child)
{
FindBestNode(child);
}
}
}
*/
}
static void Sync(JNIEnv* env, jobject obj, jint frame)
{
WebCore::Frame* pFrame = (WebCore::Frame*)frame;
LOG_ASSERT(pFrame, "%s must take a valid frame pointer!", __FUNCTION__);
WebCore::Settings* s = pFrame->settings();
if (!s)
return;
WebCore::DocLoader* docLoader = pFrame->document()->docLoader();
#ifdef ANDROID_LAYOUT
jobject layout = env->GetObjectField(obj, gFieldIds->mLayoutAlgorithm);
WebCore::Settings::LayoutAlgorithm l = (WebCore::Settings::LayoutAlgorithm)
env->CallIntMethod(layout, gFieldIds->mOrdinal);
if (s->layoutAlgorithm() != l) {
s->setLayoutAlgorithm(l);
if (pFrame->document()) {
pFrame->document()->updateStyleSelector();
if (pFrame->document()->renderer()) {
recursiveCleanupForFullLayout(pFrame->document()->renderer());
LOG_ASSERT(pFrame->view(), "No view for this frame when trying to relayout");
pFrame->view()->layout();
// FIXME: This call used to scroll the page to put the focus into view.
// It worked on the WebViewCore, but now scrolling is done outside of the
// WebViewCore, on the UI side, so there needs to be a new way to do this.
//pFrame->makeFocusVisible();
}
}
}
#endif
jobject textSize = env->GetObjectField(obj, gFieldIds->mTextSize);
float zoomFactor = env->GetIntField(textSize, gFieldIds->mTextSizeValue) / 100.0f;
if (pFrame->zoomFactor() != zoomFactor)
pFrame->setZoomFactor(zoomFactor, /*isTextOnly*/true);
jstring str = (jstring)env->GetObjectField(obj, gFieldIds->mStandardFontFamily);
s->setStandardFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFixedFontFamily);
s->setFixedFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSansSerifFontFamily);
s->setSansSerifFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSerifFontFamily);
s->setSerifFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mCursiveFontFamily);
s->setCursiveFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFantasyFontFamily);
s->setFantasyFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mDefaultTextEncoding);
s->setDefaultTextEncodingName(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mUserAgent);
WebFrame::getWebFrame(pFrame)->setUserAgent(to_string(env, str));
jint size = env->GetIntField(obj, gFieldIds->mMinimumFontSize);
s->setMinimumFontSize(size);
size = env->GetIntField(obj, gFieldIds->mMinimumLogicalFontSize);
s->setMinimumLogicalFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFontSize);
s->setDefaultFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFixedFontSize);
s->setDefaultFixedFontSize(size);
jboolean flag = env->GetBooleanField(obj, gFieldIds->mLoadsImagesAutomatically);
s->setLoadsImagesAutomatically(flag);
if (flag)
docLoader->setAutoLoadImages(true);
#ifdef ANDROID_BLOCK_NETWORK_IMAGE
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkImage);
s->setBlockNetworkImage(flag);
if(!flag)
docLoader->setBlockNetworkImage(false);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptEnabled);
s->setJavaScriptEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mPluginsEnabled);
s->setPluginsEnabled(flag);
#if ENABLE(OFFLINE_WEB_APPLICATIONS)
flag = env->GetBooleanField(obj, gFieldIds->mAppCacheEnabled);
s->setOfflineWebApplicationCacheEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mAppCachePath);
if (str) {
WebCore::String path = to_string(env, str);
if (path.length() && WebCore::cacheStorage().cacheDirectory().isNull()) {
WebCore::cacheStorage().setCacheDirectory(path);
}
}
jlong maxsize = env->GetIntField(obj, gFieldIds->mAppCacheMaxSize);
WebCore::cacheStorage().setMaximumSize(maxsize);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptCanOpenWindowsAutomatically);
s->setJavaScriptCanOpenWindowsAutomatically(flag);
#ifdef ANDROID_LAYOUT
flag = env->GetBooleanField(obj, gFieldIds->mUseWideViewport);
s->setUseWideViewport(flag);
#endif
#ifdef ANDROID_MULTIPLE_WINDOWS
flag = env->GetBooleanField(obj, gFieldIds->mSupportMultipleWindows);
s->setSupportMultipleWindows(flag);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mShrinksStandaloneImagesToFit);
s->setShrinksStandaloneImagesToFit(flag);
#if ENABLE(DATABASE)
flag = env->GetBooleanField(obj, gFieldIds->mDatabaseEnabled);
s->setDatabasesEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str && WebCore::DatabaseTracker::tracker().databaseDirectoryPath().isNull())
WebCore::DatabaseTracker::tracker().setDatabaseDirectoryPath(to_string(env, str));
#endif
#if ENABLE(DOM_STORAGE)
flag = env->GetBooleanField(obj, gFieldIds->mDomStorageEnabled);
s->setLocalStorageEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
WebCore::String localStorageDatabasePath = to_string(env,str);
if (localStorageDatabasePath.length()) {
s->setLocalStorageDatabasePath(localStorageDatabasePath);
}
}
#endif
flag = env->GetBooleanField(obj, gFieldIds->mGeolocationEnabled);
GeolocationPermissions::setAlwaysDeny(!flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mGeolocationDatabasePath);
if (str) {
GeolocationPermissions::setDatabasePath(to_string(env,str));
WebCore::Geolocation::setDatabasePath(to_string(env,str));
}
size = env->GetIntField(obj, gFieldIds->mPageCacheCapacity);
if (size > 0) {
s->setUsesPageCache(true);
WebCore::pageCache()->setCapacity(size);
} else
s->setUsesPageCache(false);
}
bool DumpRenderTreeSupportQt::shouldClose(QWebFrameAdapter *adapter)
{
WebCore::Frame* coreFrame = adapter->frame;
return coreFrame->loader()->shouldClose();
}
// API Candidate?
QString DumpRenderTreeSupportQt::responseMimeType(QWebFrameAdapter* adapter)
{
WebCore::Frame* coreFrame = adapter->frame;
WebCore::DocumentLoader* docLoader = coreFrame->loader()->documentLoader();
return docLoader->responseMIMEType();
}
static void WebHistoryClose(JNIEnv* env, jobject obj, jint frame)
{
LOG_ASSERT(frame, "Close needs a valid Frame pointer!");
WebCore::Frame* pFrame = (WebCore::Frame*)frame;
WebCore::BackForwardListImpl* list = static_cast<WebCore::BackForwardListImpl*>(pFrame->page()->backForwardList());
RefPtr<WebCore::HistoryItem> current = list->currentItem();
// Remove each item instead of using close(). close() is intended to be used
// right before the list is deleted.
WebCore::HistoryItemVector& entries = list->entries();
int size = entries.size();
for (int i = size - 1; i >= 0; --i)
list->removeItem(entries[i].get());
// Add the current item back to the list.
if (current) {
current->setBridge(0);
// addItem will update the children to match the newly created bridge
list->addItem(current);
/*
* The Grand Prix site uses anchor navigations to change the display.
* WebKit tries to be smart and not load child frames that have the
* same history urls during an anchor navigation. This means that the
* current history item stored in the child frame's loader does not
* match the item found in the history tree. If we remove all the
* entries in the back/foward list, we have to restore the entire tree
* or else a HistoryItem might have a deleted parent.
*
* In order to restore the history tree correctly, we have to look up
* all the frames first and then look up the history item. We do this
* because the history item in the tree may be null at this point.
* Unfortunately, a HistoryItem can only search its immediately
* children so we do a breadth-first rebuild of the tree.
*/
// Keep a small list of child frames to traverse.
WTF::Vector<WebCore::Frame*> frameQueue;
// Fix the top-level item.
pFrame->loader()->history()->setCurrentItem(current.get());
WebCore::Frame* child = pFrame->tree()->firstChild();
// Remember the parent history item so we can search for a child item.
RefPtr<WebCore::HistoryItem> parent = current;
while (child) {
// Use the old history item since the current one may have a
// deleted parent.
WebCore::HistoryItem* item = parent->childItemWithTarget(child->tree()->name());
child->loader()->history()->setCurrentItem(item);
// Append the first child to the queue if it exists. If there is no
// item, then we do not need to traverse the children since there
// will be no parent history item.
WebCore::Frame* firstChild;
if (item && (firstChild = child->tree()->firstChild()))
frameQueue.append(firstChild);
child = child->tree()->nextSibling();
// If we don't have a sibling for this frame and the queue isn't
// empty, use the next entry in the queue.
if (!child && !frameQueue.isEmpty()) {
child = frameQueue.at(0);
frameQueue.remove(0);
// Figure out the parent history item used when searching for
// the history item to use.
parent = child->tree()->parent()->loader()->history()->currentItem();
}
}
}
}
void DumpRenderTreeSupportQt::scalePageBy(QWebFrameAdapter* adapter, float scalefactor, const QPoint& origin)
{
WebCore::Frame* coreFrame = adapter->frame;
if (Page* page = coreFrame->page())
page->setPageScaleFactor(scalefactor, origin);
}
static void Sync(JNIEnv* env, jobject obj, jint frame)
{
WebCore::Frame* pFrame = (WebCore::Frame*)frame;
ALOG_ASSERT(pFrame, "%s must take a valid frame pointer!", __FUNCTION__);
WebCore::Settings* s = pFrame->settings();
if (!s)
return;
WebCore::CachedResourceLoader* cachedResourceLoader = pFrame->document()->cachedResourceLoader();
#ifdef ANDROID_LAYOUT
jobject layout = env->GetObjectField(obj, gFieldIds->mLayoutAlgorithm);
WebCore::Settings::LayoutAlgorithm l = (WebCore::Settings::LayoutAlgorithm)
env->CallIntMethod(layout, gFieldIds->mOrdinal);
if (s->layoutAlgorithm() != l) {
s->setLayoutAlgorithm(l);
if (pFrame->document()) {
pFrame->document()->styleSelectorChanged(WebCore::RecalcStyleImmediately);
if (pFrame->document()->renderer()) {
recursiveCleanupForFullLayout(pFrame->document()->renderer());
ALOG_ASSERT(pFrame->view(), "No view for this frame when trying to relayout");
pFrame->view()->layout();
// FIXME: This call used to scroll the page to put the focus into view.
// It worked on the WebViewCore, but now scrolling is done outside of the
// WebViewCore, on the UI side, so there needs to be a new way to do this.
//pFrame->makeFocusVisible();
}
}
}
#endif
jint textSize = env->GetIntField(obj, gFieldIds->mTextSize);
float zoomFactor = textSize / 100.0f;
if (pFrame->textZoomFactor() != zoomFactor)
pFrame->setTextZoomFactor(zoomFactor);
jstring str = (jstring)env->GetObjectField(obj, gFieldIds->mStandardFontFamily);
s->setStandardFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFixedFontFamily);
s->setFixedFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSansSerifFontFamily);
s->setSansSerifFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSerifFontFamily);
s->setSerifFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mCursiveFontFamily);
s->setCursiveFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFantasyFontFamily);
s->setFantasyFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mDefaultTextEncoding);
//SAMSUNG Change >>
String defaultEncoding = jstringToWtfString(env, str);
if (defaultEncoding == "AutoDetect") {
s->setUsesEncodingDetector(true);
} else {
s->setUsesEncodingDetector(false);
s->setDefaultTextEncodingName(defaultEncoding);
}
//SAMSUNG Change <<
//s->setDefaultTextEncodingName(jstringToWtfString(env, str));
str = (jstring)env->CallObjectMethod(obj, gFieldIds->mGetUserAgentString);//4.2 Merge
WebFrame::getWebFrame(pFrame)->setUserAgent(jstringToWtfString(env, str));
WebViewCore::getWebViewCore(pFrame->view())->setWebRequestContextUserAgent();
jint cacheMode = env->GetIntField(obj, gFieldIds->mOverrideCacheMode);
WebViewCore::getWebViewCore(pFrame->view())->setWebRequestContextCacheMode(cacheMode);
str = (jstring)env->CallObjectMethod(obj, gFieldIds->mGetAcceptLanguage);//4.2 Merge
WebRequestContext::setAcceptLanguage(jstringToWtfString(env, str));
jint size = env->GetIntField(obj, gFieldIds->mMinimumFontSize);
s->setMinimumFontSize(size);
size = env->GetIntField(obj, gFieldIds->mMinimumLogicalFontSize);
s->setMinimumLogicalFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFontSize);
s->setDefaultFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFixedFontSize);
s->setDefaultFixedFontSize(size);
jboolean flag = env->GetBooleanField(obj, gFieldIds->mLoadsImagesAutomatically);
s->setLoadsImagesAutomatically(flag);
if (flag)
cachedResourceLoader->setAutoLoadImages(true);
#ifdef ANDROID_BLOCK_NETWORK_IMAGE
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkImage);
s->setBlockNetworkImage(flag);
if(!flag)
cachedResourceLoader->setBlockNetworkImage(false);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkLoads);
WebFrame* webFrame = WebFrame::getWebFrame(pFrame);
webFrame->setBlockNetworkLoads(flag);
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptEnabled);
s->setJavaScriptEnabled(flag);
// SERI - WebGL >>
#if ENABLE(WEBGL)
flag = env->GetBooleanField(obj, gFieldIds->mWebGLEnabled);
s->setWebGLEnabled(flag);
#endif
// SERI - WebGL <<
flag = env->GetBooleanField(obj, gFieldIds->mAllowUniversalAccessFromFileURLs);
s->setAllowUniversalAccessFromFileURLs(flag);
flag = env->GetBooleanField(obj, gFieldIds->mAllowFileAccessFromFileURLs);
s->setAllowFileAccessFromFileURLs(flag);
// Hyperlink auditing (the ping attribute) has similar privacy
// considerations as does the running of JavaScript, so to keep the UI
// simpler, we leverage the same setting.
s->setHyperlinkAuditingEnabled(flag);
// ON = 0
// ON_DEMAND = 1
// OFF = 2
jobject pluginState = env->GetObjectField(obj, gFieldIds->mPluginState);
int state = env->CallIntMethod(pluginState, gFieldIds->mOrdinal);
s->setPluginsEnabled(state < 2);
#ifdef ANDROID_PLUGINS
s->setPluginsOnDemand(state == 1);
#endif
#if ENABLE(OFFLINE_WEB_APPLICATIONS)
// We only enable AppCache if it's been enabled with a call to
// setAppCacheEnabled() and if a valid path has been supplied to
// setAppCachePath(). Note that the path is applied to all WebViews
// whereas enabling is applied per WebView.
// WebCore asserts that the path is only set once. Since the path is
// shared between WebViews, we can't do the required checks to guard
// against this in the Java WebSettings.
bool isPathValid = false;
if (cacheStorage().cacheDirectory().isNull()) {
str = static_cast<jstring>(env->GetObjectField(obj, gFieldIds->mAppCachePath));
// Check for non-null string as an optimization, as this is the common case.
if (str) {
String path = jstringToWtfString(env, str);
ALOG_ASSERT(!path.empty(), "Java side should never send empty string for AppCache path");
// This database is created on the first load. If the file
// doesn't exist, we create it and set its permissions. The
// filename must match that in ApplicationCacheStorage.cpp.
String filename = pathByAppendingComponent(path, "ApplicationCache.db");
int fd = open(filename.utf8().data(), O_CREAT, permissionFlags660);
if (fd >= 0) {
close(fd);
cacheStorage().setCacheDirectory(path);
isPathValid = true;
}
}
} else
isPathValid = true;
flag = env->GetBooleanField(obj, gFieldIds->mAppCacheEnabled);
s->setOfflineWebApplicationCacheEnabled(flag && isPathValid);
jlong maxsize = env->GetLongField(obj, gFieldIds->mAppCacheMaxSize);
cacheStorage().setMaximumSize(maxsize);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptCanOpenWindowsAutomatically);
s->setJavaScriptCanOpenWindowsAutomatically(flag);
#ifdef ANDROID_LAYOUT
flag = env->GetBooleanField(obj, gFieldIds->mUseWideViewport);
s->setUseWideViewport(flag);
#endif
#ifdef ANDROID_MULTIPLE_WINDOWS
flag = env->GetBooleanField(obj, gFieldIds->mSupportMultipleWindows);
s->setSupportMultipleWindows(flag);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mShrinksStandaloneImagesToFit);
s->setShrinksStandaloneImagesToFit(flag);
jlong maxImage = env->GetLongField(obj, gFieldIds->mMaximumDecodedImageSize);
// Since in ImageSourceAndroid.cpp, the image will always not exceed
// MAX_SIZE_BEFORE_SUBSAMPLE, there's no need to pass the max value to
// WebCore, which checks (image_width * image_height * 4) as an
// estimation against the max value, which is done in CachedImage.cpp.
// And there're cases where the decoded image size will not
// exceed the max, but the WebCore estimation will. So the following
// code is commented out to fix those cases.
// if (maxImage == 0)
// maxImage = computeMaxBitmapSizeForCache();
s->setMaximumDecodedImageSize(maxImage);
flag = env->GetBooleanField(obj, gFieldIds->mPrivateBrowsingEnabled);
s->setPrivateBrowsingEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mSyntheticLinksEnabled);
s->setDefaultFormatDetection(flag);
s->setFormatDetectionAddress(flag);
s->setFormatDetectionEmail(flag);
s->setFormatDetectionTelephone(flag);
#if ENABLE(DATABASE)
flag = env->GetBooleanField(obj, gFieldIds->mDatabaseEnabled);
WebCore::Database::setIsAvailable(flag);
flag = env->GetBooleanField(obj, gFieldIds->mDatabasePathHasBeenSet);
if (flag) {
// If the user has set the database path, sync it to the DatabaseTracker.
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
String path = jstringToWtfString(env, str);
DatabaseTracker::tracker().setDatabaseDirectoryPath(path);
// This database is created when the first HTML5 Database object is
// instantiated. If the file doesn't exist, we create it and set its
// permissions. The filename must match that in
// DatabaseTracker.cpp.
String filename = SQLiteFileSystem::appendDatabaseFileNameToPath(path, "Databases.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
}
#endif
#if ENABLE(FILE_SYSTEM)
flag = env->GetBooleanField(obj, gFieldIds->mFilesystemEnabled);
flag = env->GetBooleanField(obj, gFieldIds->mFileSystemPathHasBeenSet);
if (flag) {
// If the user has set the filesystem path, sync it to the LocalFileSystem.
str = (jstring)env->GetObjectField(obj, gFieldIds->mFileSystemPath);
if (str) {
String path = jstringToWtfString(env, str);
LocalFileSystem::localFileSystem().initializeLocalFileSystem(path);
}
}
#endif
// Samsung Change - HTML5 Web Notification >>
#if ENABLE(NOTIFICATIONS)
flag = env->GetBooleanField(obj, gFieldIds->mWebnotificationEnabled);
//flag = env->GetBooleanField(obj, gFieldIds->mFileSystemPathHasBeenSet);
//if (flag) {
// If the user has set the Web notification path, sync it to the NotificationPresenterImpl.
str = (jstring)env->GetObjectField(obj, gFieldIds->mWebnotificationDatabasePath);
if (str) {
String path = jstringToWtfString(env, str);
NotificationPresenterImpl::setDatabasePath(path);
}
// ALWAYS ON = 0
// ON_DEMAND = 1
// OFF = 2
jobject notificationState = env->GetObjectField(obj, gFieldIds->mNotificationState);
int notifystate = env->CallIntMethod(notificationState, gFieldIds->mOrdinal);
NotificationPresenterImpl::setSettingsValue(notifystate);
//s->setPluginsEnabled(state < 2);
//}
#endif
// Samsung Change - HTML5 Web Notification <<
#if ENABLE(DOM_STORAGE)
flag = env->GetBooleanField(obj, gFieldIds->mDomStorageEnabled);
s->setLocalStorageEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
WTF::String localStorageDatabasePath = jstringToWtfString(env,str);
if (localStorageDatabasePath.length()) {
localStorageDatabasePath = WebCore::pathByAppendingComponent(
localStorageDatabasePath, "localstorage");
// We need 770 for folders
mkdir(localStorageDatabasePath.utf8().data(),
permissionFlags660 | S_IXUSR | S_IXGRP);
s->setLocalStorageDatabasePath(localStorageDatabasePath);
}
}
#endif
//SISO_HTMLComposer Start
flag = env->GetBooleanField(obj, gFieldIds->mEditableSupport);
if(flag)
s->setEditableLinkBehavior(WebCore::EditableLinkNeverLive);
s->setEditableSupportEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mDisableAnimation);
s->setDisableAnimation(flag);
flag = env->GetBooleanField(obj, gFieldIds->mHighResolutionDevice);
s->setHighResolutionDevice(flag);
//SISO_HTMLComposer End
//SAMSUNG ADVANCED TEXT SELECTION - BEGIN
flag = env->GetBooleanField(obj, gFieldIds->mAdvanceTextSelection);
s->setAdvancedSelectionEnabled(flag);
jlong color = env->GetLongField(obj, gFieldIds->mAdvanceSelectionBgColor);
if (-1 != color) {
int r = ((color & 0x00FF0000) >> 16);
int g = ((color & 0x0000FF00) >> 8);
int b = (color & 0x000000FF);
s->setAdvancedSelectionBgColor(r, g, b);
}
void wxWebView::OnKeyEvents(wxKeyEvent& event)
{
WebCore::Frame* frame = 0;
if (m_impl->page)
frame = m_impl->page->focusController()->focusedOrMainFrame();
if (!(frame && frame->view()))
return;
if (event.GetKeyCode() == WXK_CAPITAL)
frame->eventHandler()->capsLockStateMayHaveChanged();
WebCore::PlatformKeyboardEvent wkEvent(event);
if (frame->eventHandler()->keyEvent(wkEvent))
return;
//Some things WebKit won't do for us... Copy/Cut/Paste and KB scrolling
if (event.GetEventType() == wxEVT_KEY_DOWN) {
switch (event.GetKeyCode()) {
case 67: //"C"
if (CanCopy() && event.GetModifiers() == wxMOD_CMD) {
Copy();
return;
}
break;
case 86: //"V"
if (CanPaste() && event.GetModifiers() == wxMOD_CMD) {
Paste();
return;
}
break;
case 88: //"X"
if (CanCut() && event.GetModifiers() == wxMOD_CMD) {
Cut();
return;
}
break;
case WXK_INSERT:
if (CanCopy() && event.GetModifiers() == wxMOD_CMD) {
Copy();
return;
}
if (CanPaste() && event.GetModifiers() == wxMOD_SHIFT) {
Paste();
return;
}
return; //Insert shall not become a char
case WXK_DELETE:
if (CanCut() && event.GetModifiers() == wxMOD_SHIFT) {
Cut();
return;
}
break;
case WXK_LEFT:
case WXK_NUMPAD_LEFT:
frame->view()->scrollBy(WebCore::IntSize(-WebCore::Scrollbar::pixelsPerLineStep(), 0));
return;
case WXK_UP:
case WXK_NUMPAD_UP:
frame->view()->scrollBy(WebCore::IntSize(0, -WebCore::Scrollbar::pixelsPerLineStep()));
return;
case WXK_RIGHT:
case WXK_NUMPAD_RIGHT:
frame->view()->scrollBy(WebCore::IntSize(WebCore::Scrollbar::pixelsPerLineStep(), 0));
return;
case WXK_DOWN:
case WXK_NUMPAD_DOWN:
frame->view()->scrollBy(WebCore::IntSize(0, WebCore::Scrollbar::pixelsPerLineStep()));
return;
case WXK_END:
case WXK_NUMPAD_END:
frame->view()->setScrollPosition(WebCore::IntPoint(frame->view()->scrollX(), frame->view()->maximumScrollPosition().y()));
return;
case WXK_HOME:
case WXK_NUMPAD_HOME:
frame->view()->setScrollPosition(WebCore::IntPoint(frame->view()->scrollX(), 0));
return;
case WXK_PAGEUP:
case WXK_NUMPAD_PAGEUP:
frame->view()->scrollBy(WebCore::IntSize(0, -frame->view()->visibleHeight() * WebCore::Scrollbar::minFractionToStepWhenPaging()));
return;
case WXK_PAGEDOWN:
case WXK_NUMPAD_PAGEDOWN:
frame->view()->scrollBy(WebCore::IntSize(0, frame->view()->visibleHeight() * WebCore::Scrollbar::minFractionToStepWhenPaging()));
return;
//These we don't want turning into char events, stuff 'em
case WXK_ESCAPE:
case WXK_LBUTTON:
case WXK_RBUTTON:
case WXK_CANCEL:
case WXK_MENU:
case WXK_MBUTTON:
case WXK_CLEAR:
case WXK_PAUSE:
case WXK_SELECT:
case WXK_PRINT:
case WXK_EXECUTE:
case WXK_SNAPSHOT:
case WXK_HELP:
case WXK_F1:
case WXK_F2:
case WXK_F3:
case WXK_F4:
case WXK_F5:
case WXK_F6:
case WXK_F7:
case WXK_F8:
case WXK_F9:
case WXK_F10:
case WXK_F11:
case WXK_F12:
case WXK_F13:
case WXK_F14:
case WXK_F15:
case WXK_F16:
case WXK_F17:
case WXK_F18:
case WXK_F19:
case WXK_F20:
case WXK_F21:
case WXK_F22:
case WXK_F23:
case WXK_F24:
case WXK_NUMPAD_F1:
case WXK_NUMPAD_F2:
case WXK_NUMPAD_F3:
case WXK_NUMPAD_F4:
//When numlock is off Numpad 5 becomes BEGIN, or HOME on Char
case WXK_NUMPAD_BEGIN:
case WXK_NUMPAD_INSERT:
return;
}
}
event.Skip();
}
void WebView::OnMouseEvents(wxMouseEvent& event)
{
event.Skip();
if (!m_impl->page)
return;
WebCore::Frame* frame = m_mainFrame->GetFrame();
if (!frame || !frame->view())
return;
wxPoint globalPoint = ClientToScreen(event.GetPosition());
wxEventType type = event.GetEventType();
if (type == wxEVT_MOUSEWHEEL) {
if (m_mouseWheelZooms && event.ControlDown() && !event.AltDown() && !event.ShiftDown()) {
if (event.GetWheelRotation() < 0)
DecreaseTextSize();
else if (event.GetWheelRotation() > 0)
IncreaseTextSize();
} else {
WebCore::PlatformWheelEvent wkEvent(event, globalPoint);
frame->eventHandler()->handleWheelEvent(wkEvent);
}
return;
}
// If an event, such as a right-click event, leads to a focus change (e.g. it
// raises a dialog), WebKit never gets the mouse up event and never relinquishes
// mouse capture. This leads to WebKit handling mouse events, such as modifying
// the selection, while other controls or top level windows have the focus.
// I'm not sure if this is the right place to handle this, but I can't seem to
// find a precedent on how to handle this in other ports.
if (wxWindow::FindFocus() != this) {
while (HasCapture())
ReleaseMouse();
frame->eventHandler()->setMousePressed(false);
return;
}
int clickCount = event.ButtonDClick() ? 2 : 1;
if (clickCount == 1 && m_impl->tripleClickTimer.IsRunning()) {
wxPoint diff(event.GetPosition() - m_impl->tripleClickPos);
if (abs(diff.x) <= wxSystemSettings::GetMetric(wxSYS_DCLICK_X) &&
abs(diff.y) <= wxSystemSettings::GetMetric(wxSYS_DCLICK_Y)) {
clickCount = 3;
}
} else if (clickCount == 2) {
m_impl->tripleClickTimer.Start(getDoubleClickTime(), false);
m_impl->tripleClickPos = event.GetPosition();
}
WebCore::PlatformMouseEvent wkEvent(event, globalPoint, clickCount);
if (type == wxEVT_LEFT_DOWN || type == wxEVT_MIDDLE_DOWN || type == wxEVT_RIGHT_DOWN ||
type == wxEVT_LEFT_DCLICK || type == wxEVT_MIDDLE_DCLICK || type == wxEVT_RIGHT_DCLICK) {
frame->eventHandler()->handleMousePressEvent(wkEvent);
if (!HasCapture())
CaptureMouse();
} else if (type == wxEVT_LEFT_UP || type == wxEVT_MIDDLE_UP || type == wxEVT_RIGHT_UP) {
frame->eventHandler()->handleMouseReleaseEvent(wkEvent);
while (HasCapture())
ReleaseMouse();
} else if (type == wxEVT_MOTION || type == wxEVT_ENTER_WINDOW || type == wxEVT_LEAVE_WINDOW)
frame->eventHandler()->mouseMoved(wkEvent);
}
bool DumpRenderTreeSupportQt::isPageBoxVisible(QWebFrame* frame, int pageIndex)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
return coreFrame->document()->isPageBoxVisible(pageIndex);
}
void DumpRenderTreeSupportQt::clearOpener(QWebFrameAdapter* adapter)
{
WebCore::Frame* coreFrame = adapter->frame;
coreFrame->loader()->setOpener(0);
}
static void Sync(JNIEnv* env, jobject obj, jint frame)
{
WebCore::Frame* pFrame = (WebCore::Frame*)frame;
LOG_ASSERT(pFrame, "%s must take a valid frame pointer!", __FUNCTION__);
WebCore::Settings* s = pFrame->settings();
if (!s)
return;
WebCore::DocLoader* docLoader = pFrame->document()->docLoader();
#ifdef ANDROID_LAYOUT
jobject layout = env->GetObjectField(obj, gFieldIds->mLayoutAlgorithm);
WebCore::Settings::LayoutAlgorithm l = (WebCore::Settings::LayoutAlgorithm)
env->CallIntMethod(layout, gFieldIds->mOrdinal);
if (s->layoutAlgorithm() != l) {
s->setLayoutAlgorithm(l);
if (pFrame->document()) {
pFrame->document()->updateStyleSelector();
if (pFrame->document()->renderer()) {
recursiveCleanupForFullLayout(pFrame->document()->renderer());
LOG_ASSERT(pFrame->view(), "No view for this frame when trying to relayout");
pFrame->view()->layout();
// FIXME: This call used to scroll the page to put the focus into view.
// It worked on the WebViewCore, but now scrolling is done outside of the
// WebViewCore, on the UI side, so there needs to be a new way to do this.
//pFrame->makeFocusVisible();
}
}
}
#endif
jobject textSize = env->GetObjectField(obj, gFieldIds->mTextSize);
float zoomFactor = env->GetIntField(textSize, gFieldIds->mTextSizeValue) / 100.0f;
if (pFrame->zoomFactor() != zoomFactor)
pFrame->setZoomFactor(zoomFactor, /*isTextOnly*/true);
jstring str = (jstring)env->GetObjectField(obj, gFieldIds->mStandardFontFamily);
s->setStandardFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFixedFontFamily);
s->setFixedFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSansSerifFontFamily);
s->setSansSerifFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSerifFontFamily);
s->setSerifFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mCursiveFontFamily);
s->setCursiveFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFantasyFontFamily);
s->setFantasyFontFamily(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mDefaultTextEncoding);
s->setDefaultTextEncodingName(to_string(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mUserAgent);
WebFrame::getWebFrame(pFrame)->setUserAgent(to_string(env, str));
jint size = env->GetIntField(obj, gFieldIds->mMinimumFontSize);
s->setMinimumFontSize(size);
size = env->GetIntField(obj, gFieldIds->mMinimumLogicalFontSize);
s->setMinimumLogicalFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFontSize);
s->setDefaultFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFixedFontSize);
s->setDefaultFixedFontSize(size);
jboolean flag = env->GetBooleanField(obj, gFieldIds->mLoadsImagesAutomatically);
s->setLoadsImagesAutomatically(flag);
if (flag)
docLoader->setAutoLoadImages(true);
#ifdef ANDROID_BLOCK_NETWORK_IMAGE
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkImage);
s->setBlockNetworkImage(flag);
if(!flag)
docLoader->setBlockNetworkImage(false);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptEnabled);
s->setJavaScriptEnabled(flag);
// ON = 0
// ON_DEMAND = 1
// OFF = 2
jobject pluginState = env->GetObjectField(obj, gFieldIds->mPluginState);
int state = env->CallIntMethod(pluginState, gFieldIds->mOrdinal);
s->setPluginsEnabled(state < 2);
#ifdef ANDROID_PLUGINS
s->setPluginsOnDemand(state == 1);
#endif
#if ENABLE(OFFLINE_WEB_APPLICATIONS)
flag = env->GetBooleanField(obj, gFieldIds->mAppCacheEnabled);
s->setOfflineWebApplicationCacheEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mAppCachePath);
if (str) {
WebCore::String path = to_string(env, str);
if (path.length() && WebCore::cacheStorage().cacheDirectory().isNull()) {
WebCore::cacheStorage().setCacheDirectory(path);
// This database is created on the first load. If the file
// doesn't exist, we create it and set its permissions. The
// filename must match that in ApplicationCacheStorage.cpp.
String filename = pathByAppendingComponent(path, "ApplicationCache.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
}
jlong maxsize = env->GetIntField(obj, gFieldIds->mAppCacheMaxSize);
WebCore::cacheStorage().setMaximumSize(maxsize);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptCanOpenWindowsAutomatically);
s->setJavaScriptCanOpenWindowsAutomatically(flag);
#ifdef ANDROID_LAYOUT
flag = env->GetBooleanField(obj, gFieldIds->mUseWideViewport);
s->setUseWideViewport(flag);
#endif
#ifdef ANDROID_MULTIPLE_WINDOWS
flag = env->GetBooleanField(obj, gFieldIds->mSupportMultipleWindows);
s->setSupportMultipleWindows(flag);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mShrinksStandaloneImagesToFit);
s->setShrinksStandaloneImagesToFit(flag);
#if ENABLE(DATABASE)
flag = env->GetBooleanField(obj, gFieldIds->mDatabaseEnabled);
s->setDatabasesEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mDatabasePathHasBeenSet);
if (flag) {
// If the user has set the database path, sync it to the DatabaseTracker.
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
String path = to_string(env, str);
WebCore::DatabaseTracker::tracker().setDatabaseDirectoryPath(path);
// This database is created when the first HTML5 Database object is
// instantiated. If the file doesn't exist, we create it and set its
// permissions. The filename must match that in
// DatabaseTracker.cpp.
String filename = SQLiteFileSystem::appendDatabaseFileNameToPath(path, "Databases.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
}
#endif
#if ENABLE(DOM_STORAGE)
flag = env->GetBooleanField(obj, gFieldIds->mDomStorageEnabled);
s->setLocalStorageEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
WebCore::String localStorageDatabasePath = to_string(env,str);
if (localStorageDatabasePath.length()) {
localStorageDatabasePath = WebCore::pathByAppendingComponent(
localStorageDatabasePath, "localstorage");
// We need 770 for folders
mkdir(localStorageDatabasePath.utf8().data(),
permissionFlags660 | S_IXUSR | S_IXGRP);
s->setLocalStorageDatabasePath(localStorageDatabasePath);
}
}
#endif
flag = env->GetBooleanField(obj, gFieldIds->mGeolocationEnabled);
GeolocationPermissions::setAlwaysDeny(!flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mGeolocationDatabasePath);
if (str) {
WebCore::String path = to_string(env, str);
GeolocationPermissions::setDatabasePath(path);
WebCore::GeolocationPositionCache::setDatabasePath(path);
// This database is created when the first Geolocation object is
// instantiated. If the file doesn't exist, we create it and set its
// permissions. The filename must match that in
// GeolocationPositionCache.cpp.
WebCore::String filename = WebCore::SQLiteFileSystem::appendDatabaseFileNameToPath(
path, "CachedGeoposition.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
size = env->GetIntField(obj, gFieldIds->mPageCacheCapacity);
if (size > 0) {
s->setUsesPageCache(true);
WebCore::pageCache()->setCapacity(size);
} else
s->setUsesPageCache(false);
#if ENABLE(WEBGL)
s->setWebGLEnabled(true);
#endif
}
static void Sync(JNIEnv* env, jobject obj, jint frame)
{
WebCore::Frame* pFrame = (WebCore::Frame*)frame;
ALOG_ASSERT(pFrame, "%s must take a valid frame pointer!", __FUNCTION__);
WebCore::Settings* s = pFrame->settings();
if (!s)
return;
WebCore::CachedResourceLoader* cachedResourceLoader = pFrame->document()->cachedResourceLoader();
#ifdef ANDROID_LAYOUT
jobject layout = env->GetObjectField(obj, gFieldIds->mLayoutAlgorithm);
WebCore::Settings::LayoutAlgorithm l = (WebCore::Settings::LayoutAlgorithm)
env->CallIntMethod(layout, gFieldIds->mOrdinal);
if (s->layoutAlgorithm() != l) {
s->setLayoutAlgorithm(l);
if (pFrame->document()) {
pFrame->document()->styleSelectorChanged(WebCore::RecalcStyleImmediately);
if (pFrame->document()->renderer()) {
recursiveCleanupForFullLayout(pFrame->document()->renderer());
ALOG_ASSERT(pFrame->view(), "No view for this frame when trying to relayout");
pFrame->view()->layout();
// FIXME: This call used to scroll the page to put the focus into view.
// It worked on the WebViewCore, but now scrolling is done outside of the
// WebViewCore, on the UI side, so there needs to be a new way to do this.
//pFrame->makeFocusVisible();
}
}
}
#endif
jint textSize = env->GetIntField(obj, gFieldIds->mTextSize);
float zoomFactor = textSize / 100.0f;
if (pFrame->textZoomFactor() != zoomFactor)
pFrame->setTextZoomFactor(zoomFactor);
jstring str = (jstring)env->GetObjectField(obj, gFieldIds->mStandardFontFamily);
s->setStandardFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFixedFontFamily);
s->setFixedFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSansSerifFontFamily);
s->setSansSerifFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mSerifFontFamily);
s->setSerifFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mCursiveFontFamily);
s->setCursiveFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mFantasyFontFamily);
s->setFantasyFontFamily(jstringToWtfString(env, str));
str = (jstring)env->GetObjectField(obj, gFieldIds->mDefaultTextEncoding);
s->setDefaultTextEncodingName(jstringToWtfString(env, str));
str = (jstring)env->CallObjectMethod(obj, gFieldIds->mGetUserAgentString);
WebFrame::getWebFrame(pFrame)->setUserAgent(jstringToWtfString(env, str));
WebViewCore::getWebViewCore(pFrame->view())->setWebRequestContextUserAgent();
str = (jstring)env->GetObjectField(obj, gFieldIds->mUserAgentProfile);
WebFrame::getWebFrame(pFrame)->setUserAgentProfile(jstringToWtfString(env, str));
WebViewCore::getWebViewCore(pFrame->view())->setWebRequestContextUserAgentProfile();
jint cacheMode = env->GetIntField(obj, gFieldIds->mOverrideCacheMode);
WebViewCore::getWebViewCore(pFrame->view())->setWebRequestContextCacheMode(cacheMode);
str = (jstring)env->CallObjectMethod(obj, gFieldIds->mGetAcceptLanguage);
WebRequestContext::setAcceptLanguage(jstringToWtfString(env, str));
jint size = env->GetIntField(obj, gFieldIds->mMinimumFontSize);
s->setMinimumFontSize(size);
size = env->GetIntField(obj, gFieldIds->mMinimumLogicalFontSize);
s->setMinimumLogicalFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFontSize);
s->setDefaultFontSize(size);
size = env->GetIntField(obj, gFieldIds->mDefaultFixedFontSize);
s->setDefaultFixedFontSize(size);
jboolean flag = env->GetBooleanField(obj, gFieldIds->mLoadsImagesAutomatically);
s->setLoadsImagesAutomatically(flag);
if (flag)
cachedResourceLoader->setAutoLoadImages(true);
#ifdef ANDROID_BLOCK_NETWORK_IMAGE
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkImage);
s->setBlockNetworkImage(flag);
if(!flag)
cachedResourceLoader->setBlockNetworkImage(false);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mBlockNetworkLoads);
WebFrame* webFrame = WebFrame::getWebFrame(pFrame);
webFrame->setBlockNetworkLoads(flag);
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptEnabled);
s->setJavaScriptEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mAllowUniversalAccessFromFileURLs);
s->setAllowUniversalAccessFromFileURLs(flag);
flag = env->GetBooleanField(obj, gFieldIds->mAllowFileAccessFromFileURLs);
s->setAllowFileAccessFromFileURLs(flag);
// Hyperlink auditing (the ping attribute) has similar privacy
// considerations as does the running of JavaScript, so to keep the UI
// simpler, we leverage the same setting.
s->setHyperlinkAuditingEnabled(flag);
// ON = 0
// ON_DEMAND = 1
// OFF = 2
jobject pluginState = env->GetObjectField(obj, gFieldIds->mPluginState);
int state = env->CallIntMethod(pluginState, gFieldIds->mOrdinal);
s->setPluginsEnabled(state < 2);
#ifdef ANDROID_PLUGINS
s->setPluginsOnDemand(state == 1);
#endif
#if ENABLE(OFFLINE_WEB_APPLICATIONS)
// We only enable AppCache if it's been enabled with a call to
// setAppCacheEnabled() and if a valid path has been supplied to
// setAppCachePath(). Note that the path is applied to all WebViews
// whereas enabling is applied per WebView.
// WebCore asserts that the path is only set once. Since the path is
// shared between WebViews, we can't do the required checks to guard
// against this in the Java WebSettings.
bool isPathValid = false;
if (cacheStorage().cacheDirectory().isNull()) {
str = static_cast<jstring>(env->GetObjectField(obj, gFieldIds->mAppCachePath));
// Check for non-null string as an optimization, as this is the common case.
if (str) {
String path = jstringToWtfString(env, str);
ALOG_ASSERT(!path.empty(), "Java side should never send empty string for AppCache path");
// This database is created on the first load. If the file
// doesn't exist, we create it and set its permissions. The
// filename must match that in ApplicationCacheStorage.cpp.
String filename = pathByAppendingComponent(path, "ApplicationCache.db");
int fd = open(filename.utf8().data(), O_CREAT, permissionFlags660);
if (fd >= 0) {
close(fd);
cacheStorage().setCacheDirectory(path);
isPathValid = true;
}
}
} else
isPathValid = true;
flag = env->GetBooleanField(obj, gFieldIds->mAppCacheEnabled);
s->setOfflineWebApplicationCacheEnabled(flag && isPathValid);
jlong maxsize = env->GetLongField(obj, gFieldIds->mAppCacheMaxSize);
cacheStorage().setMaximumSize(maxsize);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mJavaScriptCanOpenWindowsAutomatically);
s->setJavaScriptCanOpenWindowsAutomatically(flag);
#ifdef ANDROID_LAYOUT
flag = env->GetBooleanField(obj, gFieldIds->mUseWideViewport);
s->setUseWideViewport(flag);
#endif
#ifdef ANDROID_MULTIPLE_WINDOWS
flag = env->GetBooleanField(obj, gFieldIds->mSupportMultipleWindows);
s->setSupportMultipleWindows(flag);
#endif
flag = env->GetBooleanField(obj, gFieldIds->mShrinksStandaloneImagesToFit);
s->setShrinksStandaloneImagesToFit(flag);
jlong maxImage = env->GetLongField(obj, gFieldIds->mMaximumDecodedImageSize);
// Since in ImageSourceAndroid.cpp, the image will always not exceed
// MAX_SIZE_BEFORE_SUBSAMPLE, there's no need to pass the max value to
// WebCore, which checks (image_width * image_height * 4) as an
// estimation against the max value, which is done in CachedImage.cpp.
// And there're cases where the decoded image size will not
// exceed the max, but the WebCore estimation will. So the following
// code is commented out to fix those cases.
// if (maxImage == 0)
// maxImage = computeMaxBitmapSizeForCache();
s->setMaximumDecodedImageSize(maxImage);
flag = env->GetBooleanField(obj, gFieldIds->mPrivateBrowsingEnabled);
s->setPrivateBrowsingEnabled(flag);
flag = env->GetBooleanField(obj, gFieldIds->mSyntheticLinksEnabled);
s->setDefaultFormatDetection(flag);
s->setFormatDetectionAddress(flag);
s->setFormatDetectionEmail(flag);
s->setFormatDetectionTelephone(flag);
#if ENABLE(DATABASE)
flag = env->GetBooleanField(obj, gFieldIds->mDatabaseEnabled);
WebCore::Database::setIsAvailable(flag);
flag = env->GetBooleanField(obj, gFieldIds->mDatabasePathHasBeenSet);
if (flag) {
// If the user has set the database path, sync it to the DatabaseTracker.
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
String path = jstringToWtfString(env, str);
DatabaseTracker::tracker().setDatabaseDirectoryPath(path);
// This database is created when the first HTML5 Database object is
// instantiated. If the file doesn't exist, we create it and set its
// permissions. The filename must match that in
// DatabaseTracker.cpp.
String filename = SQLiteFileSystem::appendDatabaseFileNameToPath(path, "Databases.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
}
#endif
#if ENABLE(DOM_STORAGE)
flag = env->GetBooleanField(obj, gFieldIds->mDomStorageEnabled);
s->setLocalStorageEnabled(flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mDatabasePath);
if (str) {
WTF::String localStorageDatabasePath = jstringToWtfString(env,str);
if (localStorageDatabasePath.length()) {
localStorageDatabasePath = WebCore::pathByAppendingComponent(
localStorageDatabasePath, "localstorage");
// We need 770 for folders
mkdir(localStorageDatabasePath.utf8().data(),
permissionFlags660 | S_IXUSR | S_IXGRP);
s->setLocalStorageDatabasePath(localStorageDatabasePath);
}
}
#endif
flag = env->GetBooleanField(obj, gFieldIds->mGeolocationEnabled);
GeolocationPermissions::setAlwaysDeny(!flag);
str = (jstring)env->GetObjectField(obj, gFieldIds->mGeolocationDatabasePath);
if (str) {
String path = jstringToWtfString(env, str);
GeolocationPermissions::setDatabasePath(path);
GeolocationPositionCache::instance()->setDatabasePath(path);
// This database is created when the first Geolocation object is
// instantiated. If the file doesn't exist, we create it and set its
// permissions. The filename must match that in
// GeolocationPositionCache.cpp.
String filename = SQLiteFileSystem::appendDatabaseFileNameToPath(path, "CachedGeoposition.db");
int fd = open(filename.utf8().data(), O_CREAT | O_EXCL, permissionFlags660);
if (fd >= 0)
close(fd);
}
flag = env->GetBooleanField(obj, gFieldIds->mXSSAuditorEnabled);
s->setXSSAuditorEnabled(flag);
#if ENABLE(LINK_PREFETCH)
flag = env->GetBooleanField(obj, gFieldIds->mLinkPrefetchEnabled);
s->setLinkPrefetchEnabled(flag);
#endif
size = env->GetIntField(obj, gFieldIds->mPageCacheCapacity);
if (size > 0) {
s->setUsesPageCache(true);
WebCore::pageCache()->setCapacity(size);
} else
s->setUsesPageCache(false);
#if ENABLE(WEB_AUTOFILL)
flag = env->GetBooleanField(obj, gFieldIds->mAutoFillEnabled);
// TODO: This updates the Settings WebCore side with the user's
// preference for autofill and will stop WebCore making requests
// into the chromium autofill code. That code in Chromium also has
// a notion of being enabled/disabled that gets read from the users
// preferences. At the moment, it's hardcoded to true on Android
// (see chrome/browser/autofill/autofill_manager.cc:405). This
// setting should probably be synced into Chromium also.
s->setAutoFillEnabled(flag);
if (flag) {
EditorClientAndroid* editorC = static_cast<EditorClientAndroid*>(pFrame->page()->editorClient());
WebAutofill* webAutofill = editorC->getAutofill();
// Set the active AutofillProfile data.
jobject autoFillProfile = env->GetObjectField(obj, gFieldIds->mAutoFillProfile);
if (autoFillProfile)
syncAutoFillProfile(env, autoFillProfile, webAutofill);
else {
// The autofill profile is null. We need to tell Chromium about this because
// this may be because the user just deleted their profile but left the
// autofill feature setting enabled.
webAutofill->clearProfiles();
}
}
#endif
// This is required to enable the XMLTreeViewer when loading an XML document that
// has no style attached to it. http://trac.webkit.org/changeset/79799
s->setDeveloperExtrasEnabled(true);
s->setSpatialNavigationEnabled(true);
bool echoPassword = env->GetBooleanField(obj,
gFieldIds->mPasswordEchoEnabled);
s->setPasswordEchoEnabled(echoPassword);
flag = env->GetBooleanField(obj, gFieldIds->mMediaPlaybackRequiresUserGesture);
s->setMediaPlaybackRequiresUserGesture(flag);
}
// API Candidate?
QString DumpRenderTreeSupportQt::responseMimeType(QWebFrame* frame)
{
WebCore::Frame* coreFrame = QWebFramePrivate::core(frame);
WebCore::DocumentLoader* docLoader = coreFrame->loader()->documentLoader();
return docLoader->responseMIMEType();
}
WebFrame* InjectedBundleDOMWindowExtension::frame() const
{
WebCore::Frame* frame = m_coreExtension->frame();
return frame ? static_cast<WebFrameLoaderClient*>(frame->loader()->client())->webFrame() : 0;
}