void
adv_isa_attach(device_t parent, device_t self, void *aux)
{
struct isa_attach_args *ia = aux;
ASC_SOFTC *sc = device_private(self);
bus_space_tag_t iot = ia->ia_iot;
bus_space_handle_t ioh;
isa_chipset_tag_t ic = ia->ia_ic;
int error;
printf("\n");
sc->sc_dev = self;
sc->sc_flags = 0x0;
if (bus_space_map(iot, ia->ia_io[0].ir_addr, ASC_IOADR_GAP, 0, &ioh)) {
aprint_error_dev(sc->sc_dev, "can't map i/o space\n");
return;
}
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ia->ia_dmat;
sc->bus_type = ASC_IS_ISA;
sc->chip_version = ASC_GET_CHIP_VER_NO(iot, ioh);
/*
* Memo:
* for EISA cards:
* sc->chip_version = (ASC_CHIP_MIN_VER_EISA - 1) + ea->ea_pid[1];
*/
/*
* Initialize the board
*/
if (adv_init(sc)) {
aprint_error_dev(sc->sc_dev, "adv_init failed\n");
return;
}
if ((error = isa_dmacascade(ic, ia->ia_drq[0].ir_drq)) != 0) {
aprint_error_dev(sc->sc_dev,
"unable to cascade DRQ, error = %d\n", error);
return;
}
sc->sc_ih = isa_intr_establish(ic, ia->ia_irq[0].ir_irq, IST_EDGE,
IPL_BIO, adv_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(sc->sc_dev, "couldn't establish interrupt\n");
return;
}
adv_attach(sc);
}
void
adv_cardbus_attach(struct device *parent, struct device *self,
void *aux)
{
struct cardbus_attach_args *ca = aux;
struct adv_cardbus_softc *csc = device_private(self);
struct asc_softc *sc = &csc->sc_adv;
cardbus_devfunc_t ct = ca->ca_ct;
cardbus_chipset_tag_t cc = ct->ct_cc;
cardbus_function_tag_t cf = ct->ct_cf;
bus_space_tag_t iot;
bus_space_handle_t ioh;
pcireg_t reg;
u_int8_t latency = 0x20;
sc->sc_flags = 0;
if (PCI_VENDOR(ca->ca_id) == PCI_VENDOR_ADVSYS) {
switch (PCI_PRODUCT(ca->ca_id)) {
case PCI_PRODUCT_ADVSYS_1200A:
printf(": AdvanSys ASC1200A SCSI adapter\n");
latency = 0;
break;
case PCI_PRODUCT_ADVSYS_1200B:
printf(": AdvanSys ASC1200B SCSI adapter\n");
latency = 0;
break;
case PCI_PRODUCT_ADVSYS_ULTRA:
switch (PCI_REVISION(ca->ca_class)) {
case ASC_PCI_REVISION_3050:
printf(": AdvanSys ABP-9xxUA SCSI adapter\n");
break;
case ASC_PCI_REVISION_3150:
printf(": AdvanSys ABP-9xxU SCSI adapter\n");
break;
}
break;
default:
printf(": unknown model!\n");
return;
}
}
csc->sc_ct = ct;
csc->sc_tag = ca->ca_tag;
csc->sc_intrline = ca->ca_intrline;
csc->sc_cbenable = 0;
/*
* Map the device.
*/
csc->sc_csr = PCI_COMMAND_MASTER_ENABLE;
#ifdef ADV_CARDBUS_ALLOW_MEMIO
if (Cardbus_mapreg_map(csc->sc_ct, ADV_CARDBUS_MMBA,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&iot, &ioh, NULL, &csc->sc_size) == 0) {
#ifdef ADV_CARDBUS_DEBUG
printf("%s: memio enabled\n", DEVNAME(sc));
#endif
csc->sc_cbenable = CARDBUS_MEM_ENABLE;
csc->sc_csr |= PCI_COMMAND_MEM_ENABLE;
} else
#endif
if (Cardbus_mapreg_map(csc->sc_ct, ADV_CARDBUS_IOBA,
PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, &csc->sc_size) == 0) {
#ifdef ADV_CARDBUS_DEBUG
printf("%s: io enabled\n", DEVNAME(sc));
#endif
csc->sc_cbenable = CARDBUS_IO_ENABLE;
csc->sc_csr |= PCI_COMMAND_IO_ENABLE;
} else {
aprint_error_dev(&sc->sc_dev, "unable to map device registers\n");
return;
}
/* Make sure the right access type is on the CardBus bridge. */
(*ct->ct_cf->cardbus_ctrl)(cc, csc->sc_cbenable);
(*ct->ct_cf->cardbus_ctrl)(cc, CARDBUS_BM_ENABLE);
/* Enable the appropriate bits in the PCI CSR. */
reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG);
reg &= ~(PCI_COMMAND_IO_ENABLE|PCI_COMMAND_MEM_ENABLE);
reg |= csc->sc_csr;
cardbus_conf_write(cc, cf, ca->ca_tag, PCI_COMMAND_STATUS_REG, reg);
/*
* Make sure the latency timer is set to some reasonable
* value.
*/
reg = cardbus_conf_read(cc, cf, ca->ca_tag, PCI_BHLC_REG);
if (PCI_LATTIMER(reg) < latency) {
reg &= ~(PCI_LATTIMER_MASK << PCI_LATTIMER_SHIFT);
reg |= (latency << PCI_LATTIMER_SHIFT);
cardbus_conf_write(cc, cf, ca->ca_tag, PCI_BHLC_REG, reg);
}
ASC_SET_CHIP_CONTROL(iot, ioh, ASC_CC_HALT);
ASC_SET_CHIP_STATUS(iot, ioh, 0);
sc->sc_iot = iot;
sc->sc_ioh = ioh;
sc->sc_dmat = ca->ca_dmat;
sc->pci_device_id = ca->ca_id;
sc->bus_type = ASC_IS_PCI;
sc->chip_version = ASC_GET_CHIP_VER_NO(iot, ioh);
/*
* Initialize the board
*/
if (adv_init(sc)) {
printf("adv_init failed\n");
return;
}
/*
* Establish the interrupt.
*/
sc->sc_ih = cardbus_intr_establish(cc, cf, ca->ca_intrline, IPL_BIO,
adv_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev,
"unable to establish interrupt\n");
return;
}
/*
* Attach.
*/
adv_attach(sc);
}
