Пример #1
0
void nandflash_hw_init(void)
{
	unsigned int reg;

	/* Configure nand pins */
	const struct pio_desc nand_pins_lo[] = {
		{"NANDOE",	AT91C_PIN_PD(0), 0,		PIO_PULLUP, PIO_PERIPH_A},
		{"NANDWE",	AT91C_PIN_PD(1), 0,		PIO_PULLUP, PIO_PERIPH_A},
		{"NANDALE",	AT91C_PIN_PD(2), 0,		PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCLE",	AT91C_PIN_PD(3), 0,		PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCS",	CONFIG_SYS_NAND_ENABLE_PIN,	1, PIO_PULLUP, PIO_OUTPUT},
		{(char *)0,	0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
	reg |= AT91C_EBI_CS3A_SM;

	reg &= ~AT91C_EBI_NFD0_ON_D16;	/* nandflash connect to D0~D15 */

	reg |= AT91C_EBI_DRV;	/* according to IAR verification package */
	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);

	/* Configure SMC CS3 */
	writel((AT91C_SMC_NWESETUP_(1)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(3)
		| AT91C_SMC_NCS_RDSETUP_(0)), 
		AT91C_BASE_SMC + SMC_SETUP3);

	writel((AT91C_SMC_NWEPULSE_(3)
		| AT91C_SMC_NCS_WRPULSE_(5) 
		| AT91C_SMC_NRDPULSE_(4) 
		| AT91C_SMC_NCS_RDPULSE_(6)), 
		AT91C_BASE_SMC + SMC_PULSE3);

	writel((AT91C_SMC_NWECYCLE_(5)
		| AT91C_SMC_NRDCYCLE_(8)),
		AT91C_BASE_SMC + SMC_CYCLE3);

	writel((AT91C_SMC_READMODE 
		| AT91C_SMC_WRITEMODE 
		| AT91C_SMC_NWAITM_NWAIT_DISABLE 
		| AT91C_SMC_DBW_WIDTH_BITS_8
		| AT91_SMC_TDF_(1)), 
		AT91C_BASE_SMC + SMC_CTRL3);

	/* Configure the nand controller pins*/
	writel((1 << AT91C_ID_PIOC_D), (PMC_PCER + AT91C_BASE_PMC));
	pio_configure(nand_pins_lo);
}
void nandflash_hw_init(void)
{
	unsigned int reg;

	/* Configure NANDFlash pins*/
	const struct pio_desc nand_pins[] = {
		{"NANDALE",	AT91C_PIN_PB(2),		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCLE",	AT91C_PIN_PB(3),		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDOE",	AT91C_PIN_PB(4),		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDWE",	AT91C_PIN_PB(5),		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCS",	CONFIG_SYS_NAND_ENABLE_PIN,	1, PIO_PULLUP, PIO_OUTPUT},
		{(char *)0, 	0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface  */
	reg = readl(AT91C_BASE_CCFG + CCFG_EBI0CSA);
	reg |= AT91C_EBI_CS3A_SM;
	writel(reg, AT91C_BASE_CCFG + CCFG_EBI0CSA);

	/* Configure SMC CS3 */
	writel((AT91C_SMC_NWESETUP_(1)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(1)
		| AT91C_SMC_NCS_RDSETUP_(0)),
		AT91C_BASE_SMC + SMC_SETUP3);

	writel((AT91C_SMC_NWEPULSE_(3)
		| AT91C_SMC_NCS_WRPULSE_(3)
		| AT91C_SMC_NRDPULSE_(3)
		| AT91C_SMC_NCS_RDPULSE_(3)),
		AT91C_BASE_SMC + SMC_PULSE3);

	writel((AT91C_SMC_NWECYCLE_(5)
		|  AT91C_SMC_NRDCYCLE_(5)),
		AT91C_BASE_SMC + SMC_CYCLE3);

	writel((AT91C_SMC_READMODE
		| AT91C_SMC_WRITEMODE
		| AT91C_SMC_NWAITM_NWAIT_DISABLE
		| AT91C_SMC_DBW_WIDTH_BITS_8
		| AT91_SMC_TDF_(2)),
		AT91C_BASE_SMC + SMC_CTRL3);

	/* Configure the NANDFlash pins */
	pmc_enable_periph_clock(AT91C_ID_PIOB);
	pio_configure(nand_pins);
}
Пример #3
0
void nandflash_hw_init(void)
{
	unsigned int reg;

	/* Configure PIOs */
	const struct pio_desc nand_pins[] = {
		{"NANDCS",	CONFIG_SYS_NAND_ENABLE_PIN,	1, PIO_PULLUP, PIO_OUTPUT},
		{(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	/* Setup Smart Media, first enable the address range of CS3
	 * in HMATRIX user interface
	* EBI IO in 1.8V mode */
	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
	reg |= AT91C_EBI_CS3A_SM;
	reg &= ~AT91C_VDDIOM_SEL_33V;
	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);

	/* Configure SMC CS3 */
	writel((AT91C_SMC_NWESETUP_(2)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(2)
		| AT91C_SMC_NCS_RDSETUP_(0)),
		AT91C_BASE_SMC + SMC_SETUP3);

	writel((AT91C_SMC_NWEPULSE_(4)
		| AT91C_SMC_NCS_WRPULSE_(4)
		| AT91C_SMC_NRDPULSE_(4)
		| AT91C_SMC_NCS_RDPULSE_(4)),
		AT91C_BASE_SMC + SMC_PULSE3);

	writel((AT91C_SMC_NWECYCLE_(7)
		|  AT91C_SMC_NRDCYCLE_(7)),
		AT91C_BASE_SMC + SMC_CYCLE3);

	writel((AT91C_SMC_READMODE
		| AT91C_SMC_WRITEMODE
		| AT91C_SMC_NWAITM_NWAIT_DISABLE
		| AT91C_SMC_DBW_WIDTH_BITS_16
		| AT91_SMC_TDF_(3)),
		AT91C_BASE_SMC + SMC_CTRL3);

	/* Configure the PIO controll */
	writel((1 << AT91C_ID_PIOC), (PMC_PCER + AT91C_BASE_PMC));
	pio_configure(nand_pins);

}
Пример #4
0
void nandflash_hw_init(void)
{
	unsigned int reg;

	/* Setup Smart Media, first enable the address range of
	 * CS3 in HMATRIX user interface  */
	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
	reg |= AT91C_EBI_CS3A_SM;
	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);

	/* Configure SMC CS3 */
	writel((AT91C_SMC_NWESETUP_(1)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(1)
		| AT91C_SMC_NCS_RDSETUP_(0)),
		AT91C_BASE_SMC + SMC_SETUP3);

	writel((AT91C_SMC_NWEPULSE_(3)
		| AT91C_SMC_NCS_WRPULSE_(3)
		| AT91C_SMC_NRDPULSE_(3)
		| AT91C_SMC_NCS_RDPULSE_(3)),
		AT91C_BASE_SMC + SMC_PULSE3);

	writel((AT91C_SMC_NWECYCLE_(5)
		| AT91C_SMC_NRDCYCLE_(5)),
		AT91C_BASE_SMC + SMC_CYCLE3);

	writel((AT91C_SMC_READMODE
		| AT91C_SMC_WRITEMODE
		/* AT91C_SMC_NWAITM_NWAIT_DISABLE */
		| (0x0 << 5)
		| AT91C_SMC_DBW_WIDTH_BITS_16
		| AT91_SMC_TDF_(2)),
		AT91C_BASE_SMC + SMC_CTRL3);

	/* configure NAND pins */

	/* {"NANDCS", AT91C_PIN_PC(14), 1, PIO_PULLUP, PIO_OUTPUT} */
	writel((0x01 << 14), AT91C_BASE_PIOC + PIO_IDR(0));
	writel((0x01 << 14), AT91C_BASE_PIOC + PIO_PPUDR(0));
	writel((0x01 << 14), AT91C_BASE_PIOC + PIO_SODR(0));
	writel((0x01 << 14), AT91C_BASE_PIOC + PIO_OER(0));
	writel((0x01 << 14), AT91C_BASE_PIOC + PIO_PER(0));

	/* enable PIOC clock  */
	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
}
static void psram_hw_init(void)
{
	unsigned short *addressMax = (unsigned short *)MICRON_8MB_ADDRESS_MAX;

	const struct pio_desc psram_pins[] = {
		{"CRE", CONFIG_SYS_PSRAM_DATA_ACCESS_PIN, 1, PIO_DEFAULT, PIO_OUTPUT},
		{(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	/* Configure SMC1 CS0 */
	writel((AT91C_SMC_NWESETUP_(0)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(0)
		| AT91C_SMC_NCS_RDSETUP_(0)),
		AT91C_BASE_SMC1 + SMC_SETUP0);

	writel((AT91C_SMC_NWEPULSE_(4)
		| AT91C_SMC_NCS_WRPULSE_(5)
		| AT91C_SMC_NRDPULSE_(2)
		| AT91C_SMC_NCS_RDPULSE_(5)),
		AT91C_BASE_SMC1 + SMC_PULSE0);

	writel((AT91C_SMC_NWECYCLE_(5)
		|  AT91C_SMC_NRDCYCLE_(7)),
		AT91C_BASE_SMC1 + SMC_CYCLE0);

	writel((AT91C_SMC_READMODE
		| AT91C_SMC_WRITEMODE
		| AT91C_SMC_BAT_BYTE_SELECT
		| AT91C_SMC_DBW_WIDTH_BITS_16
		| AT91C_SMC_PMEN
		| AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES),
		AT91C_BASE_SMC1 + SMC_CTRL0);

	/* Configure psram pins */
	pio_configure(psram_pins);

	data_access_enable();

	/* Enable page mode */
	readl(addressMax);
	readl(addressMax);
	writel(MICRON_RCR, addressMax);
	writel(MICRON_PAGE_MODE_ENABLE, addressMax);
}
void nandflash_hw_init(void)
{
	unsigned int reg;

	/* Configure Nand PINs */
	const struct pio_desc nand_pins_hi[] = {
		{"NANDOE",	CONFIG_SYS_NAND_OE_PIN,		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDWE",	CONFIG_SYS_NAND_WE_PIN,		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDALE",	CONFIG_SYS_NAND_ALE_PIN,	0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCLE",	CONFIG_SYS_NAND_CLE_PIN,	0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCS",	CONFIG_SYS_NAND_ENABLE_PIN,	1, PIO_PULLUP, PIO_OUTPUT},
		{"D0",	AT91C_PIN_PD(6), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D1",	AT91C_PIN_PD(7), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D2",	AT91C_PIN_PD(8), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D3",	AT91C_PIN_PD(9), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D4",	AT91C_PIN_PD(10), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D5",	AT91C_PIN_PD(11), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D6",	AT91C_PIN_PD(12), 0, PIO_PULLUP, PIO_PERIPH_A},
		{"D7",	AT91C_PIN_PD(13), 0, PIO_PULLUP, PIO_PERIPH_A},
		{(char *)0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	const struct pio_desc nand_pins_lo[] = {
		{"NANDOE",	CONFIG_SYS_NAND_OE_PIN,		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDWE",	CONFIG_SYS_NAND_WE_PIN,		0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDALE",	CONFIG_SYS_NAND_ALE_PIN,	0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCLE",	CONFIG_SYS_NAND_CLE_PIN,	0, PIO_PULLUP, PIO_PERIPH_A},
		{"NANDCS", 	CONFIG_SYS_NAND_ENABLE_PIN,	1, PIO_PULLUP, PIO_OUTPUT},
		{(char *)0,	0, 0, PIO_DEFAULT, PIO_PERIPH_A},
	};

	reg = readl(AT91C_BASE_CCFG + CCFG_EBICSA);
	reg |= AT91C_EBI_CS3A_SM;
	if (get_cm_rev() == 'A')
		reg &= ~AT91C_EBI_NFD0_ON_D16;
	else
		reg |= (AT91C_EBI_DDR_MP_EN | AT91C_EBI_NFD0_ON_D16);

	reg &= ~AT91C_EBI_DRV;
	writel(reg, AT91C_BASE_CCFG + CCFG_EBICSA);

	/* Configure SMC CS3 */
	writel((AT91C_SMC_NWESETUP_(1)
		| AT91C_SMC_NCS_WRSETUP_(0)
		| AT91C_SMC_NRDSETUP_(2)
		| AT91C_SMC_NCS_RDSETUP_(0)),
		AT91C_BASE_SMC + SMC_SETUP3);

	writel((AT91C_SMC_NWEPULSE_(3)
		| AT91C_SMC_NCS_WRPULSE_(5)
		| AT91C_SMC_NRDPULSE_(4)
		| AT91C_SMC_NCS_RDPULSE_(6)),
		AT91C_BASE_SMC + SMC_PULSE3);

	writel((AT91C_SMC_NWECYCLE_(5)
		| AT91C_SMC_NRDCYCLE_(7)),
		AT91C_BASE_SMC + SMC_CYCLE3);

	writel((AT91C_SMC_READMODE
		| AT91C_SMC_WRITEMODE
		| AT91C_SMC_NWAITM_NWAIT_DISABLE
		| AT91C_SMC_DBW_WIDTH_BITS_8
		| AT91_SMC_TDF_(1)),
		AT91C_BASE_SMC + SMC_CTRL3);

	/* Configure the PIO controller */
	if (get_cm_rev() == 'A')
		pio_configure(nand_pins_lo);
	else
		pio_configure(nand_pins_hi);

	pmc_enable_periph_clock(AT91C_ID_PIOC_D);
}