void
AcpiRsSetResourceLength (
ACPI_RSDESC_SIZE TotalLength,
AML_RESOURCE *Aml)
{
ACPI_RS_LENGTH ResourceLength;
ACPI_FUNCTION_ENTRY ();
/* Length is the total descriptor length minus the header length */
ResourceLength = (ACPI_RS_LENGTH)
(TotalLength - AcpiUtGetResourceHeaderLength (Aml));
/* Length is stored differently for large and small descriptors */
if (Aml->SmallHeader.DescriptorType & ACPI_RESOURCE_NAME_LARGE)
{
/* Large descriptor -- bytes 1-2 contain the 16-bit length */
ACPI_MOVE_16_TO_16 (&Aml->LargeHeader.ResourceLength, &ResourceLength);
}
else
{
/* Small descriptor -- bits 2:0 of byte 0 contain the length */
Aml->SmallHeader.DescriptorType = (UINT8)
/* Clear any existing length, preserving descriptor type bits */
((Aml->SmallHeader.DescriptorType & ~ACPI_RESOURCE_NAME_SMALL_LENGTH_MASK)
| ResourceLength);
}
}
ACPI_STATUS
AcpiRsGetListLength (
UINT8 *AmlBuffer,
UINT32 AmlBufferLength,
ACPI_SIZE *SizeNeeded)
{
ACPI_STATUS Status;
UINT8 *EndAml;
UINT8 *Buffer;
UINT32 BufferSize;
UINT16 Temp16;
UINT16 ResourceLength;
UINT32 ExtraStructBytes;
UINT8 ResourceIndex;
UINT8 MinimumAmlResourceLength;
AML_RESOURCE *AmlResource;
ACPI_FUNCTION_TRACE (RsGetListLength);
*SizeNeeded = ACPI_RS_SIZE_MIN; /* Minimum size is one EndTag */
EndAml = AmlBuffer + AmlBufferLength;
/* Walk the list of AML resource descriptors */
while (AmlBuffer < EndAml)
{
/* Validate the Resource Type and Resource Length */
Status = AcpiUtValidateResource (NULL, AmlBuffer, &ResourceIndex);
if (ACPI_FAILURE (Status))
{
/*
* Exit on failure. Cannot continue because the descriptor length
* may be bogus also.
*/
return_ACPI_STATUS (Status);
}
AmlResource = (void *) AmlBuffer;
/* Get the resource length and base (minimum) AML size */
ResourceLength = AcpiUtGetResourceLength (AmlBuffer);
MinimumAmlResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
/*
* Augment the size for descriptors with optional
* and/or variable length fields
*/
ExtraStructBytes = 0;
Buffer = AmlBuffer + AcpiUtGetResourceHeaderLength (AmlBuffer);
switch (AcpiUtGetResourceType (AmlBuffer))
{
case ACPI_RESOURCE_NAME_IRQ:
/*
* IRQ Resource:
* Get the number of bits set in the 16-bit IRQ mask
*/
ACPI_MOVE_16_TO_16 (&Temp16, Buffer);
ExtraStructBytes = AcpiRsCountSetBits (Temp16);
break;
case ACPI_RESOURCE_NAME_DMA:
/*
* DMA Resource:
* Get the number of bits set in the 8-bit DMA mask
*/
ExtraStructBytes = AcpiRsCountSetBits (*Buffer);
break;
case ACPI_RESOURCE_NAME_VENDOR_SMALL:
case ACPI_RESOURCE_NAME_VENDOR_LARGE:
/*
* Vendor Resource:
* Get the number of vendor data bytes
*/
ExtraStructBytes = ResourceLength;
/*
* There is already one byte included in the minimum
* descriptor size. If there are extra struct bytes,
* subtract one from the count.
*/
if (ExtraStructBytes)
{
ExtraStructBytes--;
}
break;
case ACPI_RESOURCE_NAME_END_TAG:
/*
* End Tag: This is the normal exit
*/
return_ACPI_STATUS (AE_OK);
case ACPI_RESOURCE_NAME_ADDRESS32:
case ACPI_RESOURCE_NAME_ADDRESS16:
case ACPI_RESOURCE_NAME_ADDRESS64:
/*
* Address Resource:
* Add the size of the optional ResourceSource
*/
ExtraStructBytes = AcpiRsStreamOptionLength (
ResourceLength, MinimumAmlResourceLength);
break;
case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
/*
* Extended IRQ Resource:
* Using the InterruptTableLength, add 4 bytes for each additional
* interrupt. Note: at least one interrupt is required and is
* included in the minimum descriptor size (reason for the -1)
*/
ExtraStructBytes = (Buffer[1] - 1) * sizeof (UINT32);
/* Add the size of the optional ResourceSource */
ExtraStructBytes += AcpiRsStreamOptionLength (
ResourceLength - ExtraStructBytes, MinimumAmlResourceLength);
break;
case ACPI_RESOURCE_NAME_GPIO:
/* Vendor data is optional */
if (AmlResource->Gpio.VendorLength)
{
ExtraStructBytes += AmlResource->Gpio.VendorOffset -
AmlResource->Gpio.PinTableOffset + AmlResource->Gpio.VendorLength;
}
else
{
ExtraStructBytes += AmlResource->LargeHeader.ResourceLength +
sizeof (AML_RESOURCE_LARGE_HEADER) -
AmlResource->Gpio.PinTableOffset;
}
break;
case ACPI_RESOURCE_NAME_SERIAL_BUS:
MinimumAmlResourceLength = AcpiGbl_ResourceAmlSerialBusSizes[
AmlResource->CommonSerialBus.Type];
ExtraStructBytes += AmlResource->CommonSerialBus.ResourceLength -
MinimumAmlResourceLength;
break;
default:
break;
}
/*
* Update the required buffer size for the internal descriptor structs
*
* Important: Round the size up for the appropriate alignment. This
* is a requirement on IA64.
*/
if (AcpiUtGetResourceType (AmlBuffer) == ACPI_RESOURCE_NAME_SERIAL_BUS)
{
BufferSize = AcpiGbl_ResourceStructSerialBusSizes[
AmlResource->CommonSerialBus.Type] + ExtraStructBytes;
}
else
{
BufferSize = AcpiGbl_ResourceStructSizes[ResourceIndex] +
ExtraStructBytes;
}
BufferSize = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (BufferSize);
*SizeNeeded += BufferSize;
ACPI_DEBUG_PRINT ((ACPI_DB_RESOURCES,
"Type %.2X, AmlLength %.2X InternalLength %.2X\n",
AcpiUtGetResourceType (AmlBuffer),
AcpiUtGetDescriptorLength (AmlBuffer), BufferSize));
/*
* Point to the next resource within the AML stream using the length
* contained in the resource descriptor header
*/
AmlBuffer += AcpiUtGetDescriptorLength (AmlBuffer);
}
/* Did not find an EndTag resource descriptor */
return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
}
ACPI_STATUS
AcpiRsGetListLength (
UINT8 *AmlBuffer,
UINT32 AmlBufferLength,
ACPI_SIZE *SizeNeeded)
{
ACPI_STATUS Status;
UINT8 *EndAml;
UINT8 *Buffer;
UINT32 BufferSize;
UINT16 Temp16;
UINT16 ResourceLength;
UINT32 ExtraStructBytes;
UINT8 ResourceIndex;
UINT8 MinimumAmlResourceLength;
ACPI_FUNCTION_TRACE (RsGetListLength);
*SizeNeeded = 0;
EndAml = AmlBuffer + AmlBufferLength;
/* Walk the list of AML resource descriptors */
while (AmlBuffer < EndAml)
{
/* Validate the Resource Type and Resource Length */
Status = AcpiUtValidateResource (AmlBuffer, &ResourceIndex);
if (ACPI_FAILURE (Status))
{
return_ACPI_STATUS (Status);
}
/* Get the resource length and base (minimum) AML size */
ResourceLength = AcpiUtGetResourceLength (AmlBuffer);
MinimumAmlResourceLength = AcpiGbl_ResourceAmlSizes[ResourceIndex];
/*
* Augment the size for descriptors with optional
* and/or variable length fields
*/
ExtraStructBytes = 0;
Buffer = AmlBuffer + AcpiUtGetResourceHeaderLength (AmlBuffer);
switch (AcpiUtGetResourceType (AmlBuffer))
{
case ACPI_RESOURCE_NAME_IRQ:
/*
* IRQ Resource:
* Get the number of bits set in the 16-bit IRQ mask
*/
ACPI_MOVE_16_TO_16 (&Temp16, Buffer);
ExtraStructBytes = AcpiRsCountSetBits (Temp16);
break;
case ACPI_RESOURCE_NAME_DMA:
/*
* DMA Resource:
* Get the number of bits set in the 8-bit DMA mask
*/
ExtraStructBytes = AcpiRsCountSetBits (*Buffer);
break;
case ACPI_RESOURCE_NAME_VENDOR_SMALL:
case ACPI_RESOURCE_NAME_VENDOR_LARGE:
/*
* Vendor Resource:
* Get the number of vendor data bytes
*/
ExtraStructBytes = ResourceLength;
break;
case ACPI_RESOURCE_NAME_END_TAG:
/*
* End Tag:
* This is the normal exit, add size of EndTag
*/
*SizeNeeded += ACPI_RS_SIZE_MIN;
return_ACPI_STATUS (AE_OK);
case ACPI_RESOURCE_NAME_ADDRESS32:
case ACPI_RESOURCE_NAME_ADDRESS16:
case ACPI_RESOURCE_NAME_ADDRESS64:
/*
* Address Resource:
* Add the size of the optional ResourceSource
*/
ExtraStructBytes = AcpiRsStreamOptionLength (
ResourceLength, MinimumAmlResourceLength);
break;
case ACPI_RESOURCE_NAME_EXTENDED_IRQ:
/*
* Extended IRQ Resource:
* Using the InterruptTableLength, add 4 bytes for each additional
* interrupt. Note: at least one interrupt is required and is
* included in the minimum descriptor size (reason for the -1)
*/
ExtraStructBytes = (Buffer[1] - 1) * sizeof (UINT32);
/* Add the size of the optional ResourceSource */
ExtraStructBytes += AcpiRsStreamOptionLength (
ResourceLength - ExtraStructBytes, MinimumAmlResourceLength);
break;
default:
break;
}
/*
* Update the required buffer size for the internal descriptor structs
*
* Important: Round the size up for the appropriate alignment. This
* is a requirement on IA64.
*/
BufferSize = AcpiGbl_ResourceStructSizes[ResourceIndex] +
ExtraStructBytes;
BufferSize = (UINT32) ACPI_ROUND_UP_TO_NATIVE_WORD (BufferSize);
*SizeNeeded += BufferSize;
ACPI_DEBUG_PRINT ((ACPI_DB_RESOURCES,
"Type %.2X, AmlLength %.2X InternalLength %.2X\n",
AcpiUtGetResourceType (AmlBuffer),
AcpiUtGetDescriptorLength (AmlBuffer), BufferSize));
/*
* Point to the next resource within the AML stream using the length
* contained in the resource descriptor header
*/
AmlBuffer += AcpiUtGetDescriptorLength (AmlBuffer);
}
/* Did not find an EndTag resource descriptor */
return_ACPI_STATUS (AE_AML_NO_RESOURCE_END_TAG);
}