/************************************************************************************************
* CParseGroup
* copy constructor. recursively copies all subgroups and pairs.
*
* Input
* an existing parse group
*
* Output
* none
*
************************************************************************************************/
CParseGroup::CParseGroup(CParseGroup *orig)
{
CParseGroup *newGroup = 0;
if (orig == 0)
{
return;
}
mWriteable = orig->mWriteable;
mName = orig->mName;
mParent = orig->mParent;
for (TParsePairIter itp = orig->PairsBegin(); itp != orig->PairsEnd(); itp++)
{
AddPair((*itp).first, (*itp).second);
}
for (TParseGroupIter itg = orig->GroupsBegin(); itg != orig->GroupsEnd(); itg++)
{
newGroup = new CParseGroup((*itg).second);
AddSubGroup(newGroup);
}
}
//==== Constructor ====//
WireScreen::WireScreen( ScreenMgr* mgr ) : GeomScreen( mgr, 300, 525, "Wireframe" )
{
RemoveTab( GetTab( m_SubSurfTab_ind ) );
Fl_Group* wire_tab = AddTab( "WireFrame" );
Fl_Group* wire_group = AddSubGroup( wire_tab, 5 );
m_WireLayout.SetGroupAndScreen( wire_group, this );
m_WireLayout.AddDividerBox( "Wireframe Characteristics" );
m_TypeChoice.AddItem( "Lifting" );
m_TypeChoice.AddItem( "Non-Lifting" );
m_WireLayout.AddChoice( m_TypeChoice, "Type" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Normal Vector" );
m_WireLayout.AddButton( m_InvertButton, "Invert" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Swap Point Ordering" );
m_WireLayout.AddButton( m_SwapIJButton, "Swap I/J" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Reverse" );
m_WireLayout.AddButton( m_RevIButton, "Reverse I" );
m_WireLayout.AddButton( m_RevJButton, "Reverse J" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Patch" );
m_IStartPatchTypeChoice.AddItem( "None" );
m_IStartPatchTypeChoice.AddItem( "Point" );
m_IStartPatchTypeChoice.AddItem( "Line" );
m_IStartPatchTypeChoice.AddItem( "Copy Opposite" );
m_IStartPatchTypeChoice.AddItem( "Halfway Opposite" );
m_WireLayout.AddChoice( m_IStartPatchTypeChoice, "I Start" );
m_IEndPatchTypeChoice.AddItem( "None" );
m_IEndPatchTypeChoice.AddItem( "Point" );
m_IEndPatchTypeChoice.AddItem( "Line" );
m_IEndPatchTypeChoice.AddItem( "Copy Opposite" );
m_IEndPatchTypeChoice.AddItem( "Halfway Opposite" );
m_WireLayout.AddChoice( m_IEndPatchTypeChoice, "I End" );
m_JStartPatchTypeChoice.AddItem( "None" );
m_JStartPatchTypeChoice.AddItem( "Point" );
m_JStartPatchTypeChoice.AddItem( "Line" );
m_JStartPatchTypeChoice.AddItem( "Copy Opposite" );
m_JStartPatchTypeChoice.AddItem( "Halfway Opposite" );
m_WireLayout.AddChoice( m_JStartPatchTypeChoice, "J Start" );
m_JEndPatchTypeChoice.AddItem( "None" );
m_JEndPatchTypeChoice.AddItem( "Point" );
m_JEndPatchTypeChoice.AddItem( "Line" );
m_JEndPatchTypeChoice.AddItem( "Copy Opposite" );
m_JEndPatchTypeChoice.AddItem( "Halfway Opposite" );
m_WireLayout.AddChoice( m_JEndPatchTypeChoice, "J End" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Start/End Skip" );
m_WireLayout.AddIndexSelector( m_ISkipStartIndexSelector, "I Start Skip" );
m_WireLayout.AddIndexSelector( m_ISkipEndIndexSelector, "I End Skip" );
m_WireLayout.AddIndexSelector( m_JSkipStartIndexSelector, "J Start Skip" );
m_WireLayout.AddIndexSelector( m_JSkipEndIndexSelector, "J End Skip" );
m_WireLayout.AddYGap();
m_WireLayout.AddDividerBox( "Stride" );
m_WireLayout.AddIndexSelector( m_IStrideIndexSelector, "I Stride" );
m_WireLayout.AddIndexSelector( m_JStrideIndexSelector, "J Stride" );
}
FitModelScreen::FitModelScreen( ScreenMgr* mgr ) : TabScreen( mgr, 400, 469 + 107, "Fit Model", 107 )
{
m_NVarLast = 0;
m_FLTK_Window->callback( staticCloseCB, this );
Fl_Group* pts_tab = AddTab( "Pick Points" );
Fl_Group* var_tab = AddTab( "Pick Vars" );
( (Vsp_Group*) var_tab )->SetAllowDrop( true );
var_tab->callback( staticCB, this );
Fl_Group* tree_tab = AddTab( "Var Tree" );
( (Vsp_Group*) tree_tab )->SetAllowDrop( true );
tree_tab->callback( staticCB, this );
Fl_Group* fit_tab = AddTab( "Fit Model" );
Fl_Group* saveLoad_tab = AddTab( "Save/Import" );
pts_tab->show();
// Set up pts tab
Fl_Group* pts_group = AddSubGroup( pts_tab, 5 );
m_PickPtsLayout.SetGroupAndScreen( pts_group, this );
m_PickPtsLayout.AddDividerBox( "Point Selection" );
m_PickPtsLayout.SetButtonWidth( 100 );
m_PickPtsLayout.AddOutput( m_NSelOutput, "Num Selected" );
m_PickPtsLayout.SetFitWidthFlag( false );
m_PickPtsLayout.SetSameLineFlag( true );
m_PickPtsLayout.SetButtonWidth( ( m_PickPtsLayout.GetRemainX() ) / 2 );
m_PickPtsLayout.AddButton( m_SelOneButton, "Select One" );
m_PickPtsLayout.AddButton( m_HideSelButton, "Hide Selection" );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.AddButton( m_SelBoxButton, "Select Region" );
m_PickPtsLayout.AddButton( m_HideUnselButton, "Hide Unselected" );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.AddButton( m_SelAllButton, "Select All" );
m_PickPtsLayout.AddButton( m_HideAllButton, "Hide All" );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.AddButton( m_SelNoneButton, "Select None" );
m_PickPtsLayout.AddButton( m_HideNoneButton, "Show All" );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.AddButton( m_SelInvButton, "Invert Selection" );
m_PickPtsLayout.AddButton( m_HideInvButton, "Invert Hidden" );
m_PickPtsLayout.SetFitWidthFlag( true );
m_PickPtsLayout.SetSameLineFlag( false );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.AddYGap();
m_PickPtsLayout.AddDividerBox( "Target Points" );
int browser_h = 150;
m_TargetPtBrowser = new Fl_Browser( m_PickPtsLayout.GetX(), m_PickPtsLayout.GetY(), m_PickPtsLayout.GetW(), browser_h );
m_TargetPtBrowser->type( 1 );
m_TargetPtBrowser->labelfont( 13 );
m_TargetPtBrowser->labelsize( 12 );
m_TargetPtBrowser->textsize( 12 );
m_TargetPtBrowser->callback( staticScreenCB, this );
pts_group->add( m_TargetPtBrowser );
m_PickPtsLayout.AddY( browser_h );
m_TargetGeomPicker.AddExcludeType( MESH_GEOM_TYPE );
m_TargetGeomPicker.AddExcludeType( PT_CLOUD_GEOM_TYPE );
m_TargetGeomPicker.AddExcludeType( BLANK_GEOM_TYPE );
m_PickPtsLayout.AddGeomPicker( m_TargetGeomPicker );
m_PickPtsLayout.SetFitWidthFlag( false );
m_PickPtsLayout.SetSameLineFlag( true );
m_PickPtsLayout.SetButtonWidth( 50 );
m_PickPtsLayout.AddButton( m_UFreeButton, "Free" );
m_PickPtsLayout.AddButton( m_UFixButton, "Fix" );
m_PickPtsLayout.SetFitWidthFlag( true );
m_PickPtsLayout.AddSlider( m_USlider, "U", 1.0, "%7.3f" );
m_PickPtsLayout.ForceNewLine();
m_UToggleGroup.Init( this );
m_UToggleGroup.AddButton( m_UFixButton.GetFlButton() );
m_UToggleGroup.AddButton( m_UFreeButton.GetFlButton() );
m_PickPtsLayout.SetFitWidthFlag( false );
m_PickPtsLayout.AddButton( m_WFreeButton, "Free" );
m_PickPtsLayout.AddButton( m_WFixButton, "Fix" );
m_PickPtsLayout.SetFitWidthFlag( true );
m_PickPtsLayout.AddSlider( m_WSlider, "W", 1.0, "%7.3f" );
m_PickPtsLayout.ForceNewLine();
m_WToggleGroup.Init( this );
m_WToggleGroup.AddButton( m_WFixButton.GetFlButton() );
m_WToggleGroup.AddButton( m_WFreeButton.GetFlButton() );
m_PickPtsLayout.SetFitWidthFlag( false );
m_PickPtsLayout.SetButtonWidth( ( m_PickPtsLayout.GetRemainX() ) / 3 );
m_PickPtsLayout.AddButton( m_AddTargetPtButton, "Add Target" );
m_PickPtsLayout.AddButton( m_DelTargetPtButton, "Delete Target" );
m_PickPtsLayout.AddButton( m_ClearTargetPtButton, "Clear Target" );
m_PickPtsLayout.ForceNewLine();
m_PickPtsLayout.SetFitWidthFlag( true );
m_PickPtsLayout.SetSameLineFlag( false );
m_PickPtsLayout.SetButtonWidth( 100 );
m_PickPtsLayout.AddOutput( m_NTgtOutput, "Num Target Pts." );
// Set up vars tab
Fl_Group* var_group = AddSubGroup( var_tab, 5 );
m_PickVarLayout.SetGroupAndScreen( var_group, this );
m_PickVarLayout.AddDividerBox( "Variable" );
m_PickVarLayout.AddParmPicker( m_ParmPicker );
m_PickVarLayout.AddYGap();
m_PickVarLayout.SetFitWidthFlag( false );
m_PickVarLayout.SetSameLineFlag( true );
m_PickVarLayout.SetButtonWidth( ( m_PickVarLayout.GetRemainX() ) / 3 );
m_PickVarLayout.AddButton( m_AddVarButton, "Add Variable" );
m_PickVarLayout.AddButton( m_DelVarButton, "Delete Variable" );
m_PickVarLayout.AddButton( m_ClearVarButton, "Clear Variables" );
m_PickVarLayout.ForceNewLine();
m_PickVarLayout.SetFitWidthFlag( true );
m_PickVarLayout.SetSameLineFlag( false );
m_PickVarLayout.SetButtonWidth( 100 );
m_PickVarLayout.AddOutput( m_NVarOutput, "Num Variables" );
m_PickVarLayout.AddYGap();
m_PickVarLayout.AddDividerBox( "Variable List" );
browser_h = 265;
varBrowser = new Fl_Browser( m_PickVarLayout.GetX(), m_PickVarLayout.GetY(), m_PickVarLayout.GetW(), browser_h );
varBrowser->type( 1 );
varBrowser->labelfont( 13 );
varBrowser->labelsize( 12 );
varBrowser->textsize( 12 );
varBrowser->callback( staticScreenCB, this );
var_group->add( varBrowser );
m_PickVarLayout.AddY( browser_h );
// Set up tree tab
Fl_Group* tree_group = AddSubGroup( tree_tab, 5 );
m_PickTreeLayout.SetGroupAndScreen( tree_group, this );
m_PickTreeLayout.AddDividerBox( "Variable Tree" );
m_PickTreeLayout.AddParmTreePicker( m_ParmTreePicker, m_PickTreeLayout.GetW(), 370 );
m_PickTreeLayout.AddButton( m_ClearVarButton2, "Clear Variables" );
// Set up fit tab
Fl_Group* fit_group = AddSubGroup( fit_tab, 5 );
m_FitModelLayout.SetGroupAndScreen( fit_group, this );
m_FitScrollGroup = AddSubScroll( fit_group, 5 );
m_FitScrollGroup->type( Fl_Scroll::VERTICAL_ALWAYS );
m_FitVarScrollLayout.SetGroupAndScreen( m_FitScrollGroup, this );
// Set up optimization area at bottom of GUI.
m_OptimLayout.SetGroupAndScreen( m_FLTK_Window, this );
m_OptimLayout.AddY( m_OptimLayout.GetRemainY()
- 4 * m_OptimLayout.GetStdHeight()
- m_OptimLayout.GetGapHeight()
- m_OptimLayout.GetDividerHeight() );
m_OptimLayout.AddDividerBox( "Optimizer Control" );
m_OptimLayout.SetFitWidthFlag( false );
m_OptimLayout.SetSameLineFlag( true );
m_OptimLayout.SetButtonWidth( ( m_OptimLayout.GetRemainX() ) / 4 );
m_OptimLayout.SetInputWidth( ( m_OptimLayout.GetRemainX() ) / 4 );
m_OptimLayout.AddOutput( m_DOFOutput, "DOF" );
m_OptimLayout.AddOutput( m_CondOutput, "Conditions" );
m_OptimLayout.ForceNewLine();
m_OptimLayout.SetButtonWidth( ( m_OptimLayout.GetRemainX() ) / 2 );
m_OptimLayout.AddButton( m_SearchUWButton, "Search UW" );
m_OptimLayout.AddButton( m_RefineUWButton, "Refine UW" );
m_OptimLayout.ForceNewLine();
m_OptimLayout.AddButton( m_UpdateDistButton, "Update Distance" );
m_OptimLayout.AddButton( m_OptimizeButton, "Fit" );
m_OptimLayout.ForceNewLine();
m_OptimLayout.SetFitWidthFlag( true );
m_OptimLayout.SetSameLineFlag( false );
m_OptimLayout.SetButtonWidth( 100 );
m_OptimLayout.AddOutput( m_DistOutput, "Distance Metric" );
//===== Save/Load Tab =====//
Fl_Group* saveLoad_group = AddSubGroup( saveLoad_tab, 5 );
m_FitModelLayout.SetGroupAndScreen( saveLoad_group, this );
m_FitModelLayout.AddDividerBox("Save Targets & Variables");
m_FitModelLayout.AddYGap();
m_FitModelLayout.SetFitWidthFlag( false );
m_FitModelLayout.SetSameLineFlag( true );
m_FitModelLayout.SetButtonWidth( 75 );
m_FitModelLayout.SetInputWidth( m_FitModelLayout.GetRemainX() - m_FitModelLayout.GetButtonWidth() - 50 );
m_FitModelLayout.AddOutput(m_SaveOutput, "File Name:");
m_FitModelLayout.SetButtonWidth( 50 );
m_FitModelLayout.AddButton(m_SaveSelect, "...");
m_FitModelLayout.ForceNewLine();
m_FitModelLayout.AddYGap();
m_FitModelLayout.SetFitWidthFlag( true );
m_FitModelLayout.SetSameLineFlag( false );
m_FitModelLayout.AddButton(m_Save, "Save");
m_FitModelLayout.AddYGap();
m_FitModelLayout.AddDividerBox("Import Targets & Variables");
m_FitModelLayout.AddYGap();
m_FitModelLayout.SetFitWidthFlag( false );
m_FitModelLayout.SetSameLineFlag( true );
m_FitModelLayout.SetButtonWidth( 75 );
m_FitModelLayout.AddOutput(m_LoadOutput, "File Name:");
m_FitModelLayout.SetButtonWidth( 50 );
m_FitModelLayout.AddButton(m_LoadSelect, "...");
m_FitModelLayout.ForceNewLine();
m_FitModelLayout.AddYGap();
m_FitModelLayout.SetFitWidthFlag( true );
m_FitModelLayout.SetSameLineFlag( false );
m_FitModelLayout.AddButton(m_Load, "Import");
}
DesignVarScreen::DesignVarScreen( ScreenMgr* mgr ) : TabScreen( mgr, 300, 463, "Design Variables" )
{
m_NVarLast = 0;
Fl_Group* pick_tab = AddTab( "Pick" );
( (Vsp_Group*) pick_tab )->SetAllowDrop( true );
pick_tab->callback( staticCB, this );
Fl_Group* adj_tab = AddTab( "Adjust" );
Fl_Group* pick_group = AddSubGroup( pick_tab, 5 );
m_AdjustGroup = AddSubScroll( adj_tab, 5 );
m_AdjustGroup->type( Fl_Scroll::VERTICAL_ALWAYS );
m_PickLayout.SetGroupAndScreen( pick_group, this );
m_PickLayout.AddDividerBox( "Variable" );
m_PickLayout.AddParmPicker( m_ParmPicker );
m_PickLayout.SetFitWidthFlag( false );
m_PickLayout.SetSameLineFlag( true );
m_PickLayout.AddLabel( "XDDM Type:", 100 );
m_PickLayout.SetButtonWidth( m_PickLayout.GetRemainX() / 2 );
m_PickLayout.AddButton( m_XDDMVarButton, "Variable" );
m_PickLayout.AddButton( m_XDDMConstButton, "Constant" );
m_PickLayout.ForceNewLine();
m_XDDMGroup.Init( this );
m_XDDMGroup.AddButton( m_XDDMVarButton.GetFlButton() );
m_XDDMGroup.AddButton( m_XDDMConstButton.GetFlButton() );
vector< int > dv_val_map;
dv_val_map.push_back( vsp::XDDM_VAR );
dv_val_map.push_back( vsp::XDDM_CONST );
m_XDDMGroup.SetValMapVec( dv_val_map );
m_PickLayout.AddYGap();
m_PickLayout.SetButtonWidth( ( m_PickLayout.GetRemainX() ) / 2 );
m_PickLayout.AddButton( m_AddVarButton, "Add Variable" );
m_PickLayout.AddButton( m_DelVarButton, "Delete Variable" );
m_PickLayout.ForceNewLine();
m_PickLayout.SetFitWidthFlag( true );
m_PickLayout.SetSameLineFlag( false );
m_PickLayout.AddYGap();
m_PickLayout.AddDividerBox( "Variable List" );
int browser_h = 200;
varBrowser = new Fl_Browser( m_PickLayout.GetX(), m_PickLayout.GetY(), m_PickLayout.GetW(), browser_h );
varBrowser->type( 1 );
varBrowser->labelfont( 13 );
varBrowser->labelsize( 12 );
varBrowser->textsize( 12 );
varBrowser->callback( staticScreenCB, this );
pick_group->add( varBrowser );
m_PickLayout.AddY( browser_h );
m_PickLayout.AddYGap();
m_PickLayout.AddDividerBox( "Design File" );
m_FileTypeChoice.AddItem( "Design file *.des" );
m_FileTypeChoice.AddItem( "Cart3D XDDM file *.xddm" );
m_PickLayout.AddChoice( m_FileTypeChoice, "File Type:" );
m_PickLayout.SetFitWidthFlag( false );
m_PickLayout.SetSameLineFlag( true );
m_PickLayout.AddButton( m_SaveButton, "Save" );
m_PickLayout.AddButton( m_LoadButton, "Load" );
m_PickLayout.ForceNewLine();
pick_tab->show();
m_AdjustLayout.SetGroupAndScreen( m_AdjustGroup, this );
}
VSPAEROScreen::VSPAEROScreen( ScreenMgr* mgr ) : TabScreen( mgr, VSPAERO_SCREEN_WIDTH, VSPAERO_SCREEN_HEIGHT, "VSPAERO" )
{
m_FLTK_Window->callback( staticCloseCB, this );
m_SolverPair = make_pair( &VSPAEROMgr, this ); //solverpair type
m_ViewerPair = make_pair( this, VSPAERO_VIEWER ); //monitorpair type
int window_border_width = 5;
int group_border_width = 2;
int total_width = VSPAERO_SCREEN_WIDTH - 2 * window_border_width;
int total_height = VSPAERO_SCREEN_HEIGHT - 2 * window_border_width;
int row_height = 20;
int action_button_height = 0 * row_height; //space reserved for action buttons at the bottom
//==== Overview Tab ====//
Fl_Group* overview_tab = AddTab( "Overview" );
Fl_Group* overview_group = AddSubGroup( overview_tab, window_border_width );
m_OverviewLayout.SetGroupAndScreen( overview_group, this );
// Column layout
GroupLayout left_col_layout;
int left_col_width = 350 - 2 * group_border_width;
int col_height = m_OverviewLayout.GetH() - group_border_width - action_button_height;
m_OverviewLayout.AddSubGroupLayout( left_col_layout, left_col_width, col_height );
m_OverviewLayout.AddX( left_col_layout.GetW() + 2 * group_border_width );
GroupLayout right_col_layout;
int right_col_width = m_OverviewLayout.GetRemainX();
m_OverviewLayout.AddSubGroupLayout( right_col_layout, right_col_width, col_height );
m_OverviewLayout.ForceNewLine();
m_OverviewLayout.AddY( right_col_layout.GetH() ); //add Y for Execute divider box
// Case Setup
left_col_layout.AddSubGroupLayout( m_GeomLayout, left_col_layout.GetW() - 2 * group_border_width, 8 * row_height );
left_col_layout.AddY( m_GeomLayout.GetH() );
m_GeomLayout.AddDividerBox( "Case Setup" );
m_GeomLayout.SetSameLineFlag( true );
m_GeomLayout.SetFitWidthFlag( false );
// Analysis method radio button group setup
m_GeomLayout.SetButtonWidth( m_GeomLayout.GetW() / 2 );
m_GeomLayout.AddButton( m_AeroMethodToggleVLM, "Vortex Lattice (VLM)" );
m_GeomLayout.AddButton( m_AeroMethodTogglePanel, "Panel Method" );
m_AeroMethodToggleGroup.Init( this );
m_AeroMethodToggleGroup.AddButton( m_AeroMethodToggleVLM.GetFlButton() );
m_AeroMethodToggleGroup.AddButton( m_AeroMethodTogglePanel.GetFlButton() );
vector< int > val_map;
val_map.push_back( vsp::VSPAERO_ANALYSIS_METHOD::VORTEX_LATTICE );
val_map.push_back( vsp::VSPAERO_ANALYSIS_METHOD::PANEL );
m_AeroMethodToggleGroup.SetValMapVec( val_map );
m_GeomLayout.ForceNewLine();
// Degengeom output file selection, used for VLM & Panel methods
int labelButtonWidth = 60;
int fileButtonWidth = 25;
int inputWidth = m_GeomLayout.GetW() - labelButtonWidth - fileButtonWidth;
m_GeomLayout.SetButtonWidth( labelButtonWidth );
m_GeomLayout.SetInputWidth( inputWidth );
m_GeomLayout.AddOutput( m_DegenFileName, "Degen" );
m_GeomLayout.SetButtonWidth( fileButtonWidth );
m_GeomLayout.AddButton( m_DegenFileButton, "..." );
m_GeomLayout.ForceNewLine();
// CompGeom output file selection, used for Panel method only
m_GeomLayout.SetButtonWidth( labelButtonWidth );
m_GeomLayout.SetInputWidth( inputWidth );
m_GeomLayout.AddOutput( m_CompGeomFileName, "Panel" );
m_GeomLayout.SetButtonWidth( fileButtonWidth );
m_GeomLayout.AddButton( m_CompGeomFileButton, "..." );
m_GeomLayout.ForceNewLine();
m_GeomLayout.InitWidthHeightVals();
m_GeomLayout.SetSameLineFlag( false );
m_GeomLayout.SetFitWidthFlag( true );
m_GeomLayout.AddChoice( m_GeomSetChoice, "Geometry Set:" );
m_GeomLayout.AddSlider( m_NCPUSlider, "Num CPU", 10.0, "%3.0f" );
m_GeomLayout.AddButton( m_StabilityCalcToggle, "Stability Calculation" );
m_GeomLayout.AddButton( m_BatchCalculationToggle, "Batch Calculation" );
left_col_layout.AddY( group_border_width );
// Wake
left_col_layout.AddSubGroupLayout( m_WakeLayout, left_col_layout.GetW() - 2 * group_border_width, 4 * row_height );
left_col_layout.AddY( m_WakeLayout.GetH() );
m_WakeLayout.AddDividerBox( "Wake" );
m_WakeLayout.SetSameLineFlag( false );
m_WakeLayout.SetFitWidthFlag( true );
m_WakeLayout.AddSlider( m_WakeNumIterSlider, "Num It.", 10, "%3.0f" );
m_WakeLayout.AddSlider( m_WakeAvgStartIterSlider, "Avg Start It.", 11, "%3.0f" );
m_WakeLayout.AddSlider( m_WakeSkipUntilIterSlider, "Skip Until It.", 11, "%3.0f" );
left_col_layout.AddY( group_border_width );
// Reference Quantities
left_col_layout.AddSubGroupLayout( m_RefLayout, left_col_layout.GetW() - 2 * group_border_width, 6 * row_height );
left_col_layout.AddY( m_RefLayout.GetH() );
m_RefLayout.AddDividerBox( "Reference Area, Lengths" );
m_RefLayout.SetSameLineFlag( true );
m_RefLayout.SetFitWidthFlag( false );
m_RefLayout.SetButtonWidth( m_RefLayout.GetW() / 2 );
m_RefLayout.AddButton( m_RefManualToggle, "Manual" );
m_RefLayout.AddButton( m_RefChoiceToggle, "From Model" );
m_RefLayout.ForceNewLine();
m_RefLayout.InitWidthHeightVals();
m_RefLayout.SetSameLineFlag( false );
m_RefLayout.SetFitWidthFlag( true );
m_RefLayout.AddChoice( m_RefWingChoice, "Ref. Wing" );
m_RefLayout.AddSlider( m_SrefSlider, "Sref", 1000.0, "%7.3f" );
m_RefLayout.AddSlider( m_brefSlider, "bref", 100.0, "%7.3f" );
m_RefLayout.AddSlider( m_crefSlider, "cref", 100.0, "%7.3f" );
m_RefToggle.Init( this );
m_RefToggle.AddButton( m_RefManualToggle.GetFlButton() );
m_RefToggle.AddButton( m_RefChoiceToggle.GetFlButton() );
left_col_layout.AddY( group_border_width );
// CG
left_col_layout.AddSubGroupLayout( m_CGLayout, left_col_layout.GetW() - 2 * group_border_width, 6 * row_height );
left_col_layout.AddY( m_CGLayout.GetH() );
m_CGLayout.AddDividerBox( "Moment Reference Position" );
m_CGLayout.SetButtonWidth( 125 );
m_CGLayout.SetSameLineFlag( true );
m_CGLayout.AddChoice( m_CGSetChoice, "Mass Set:", m_CGLayout.GetButtonWidth() );
m_CGLayout.SetFitWidthFlag( false );
m_CGLayout.AddButton( m_MassPropButton, "Calc CG" );
m_CGLayout.ForceNewLine();
m_CGLayout.SetSameLineFlag( false );
m_CGLayout.SetFitWidthFlag( true );
m_CGLayout.InitWidthHeightVals();
m_CGLayout.AddSlider( m_NumSliceSlider, "Num Slices", 100, "%4.0f" );
m_CGLayout.AddSlider( m_XcgSlider, "Xref", 100.0, "%7.3f" );
m_CGLayout.AddSlider( m_YcgSlider, "Yref", 100.0, "%7.3f" );
m_CGLayout.AddSlider( m_ZcgSlider, "Zref", 100.0, "%7.3f" );
left_col_layout.AddY( group_border_width );
// Flow Condition
left_col_layout.AddSubGroupLayout( m_FlowLayout, left_col_layout.GetW() - 2 * group_border_width, 4 * row_height );
left_col_layout.AddY( m_FlowLayout.GetH() );
m_FlowLayout.AddDividerBox( "Flow Condition" );
m_FlowLayout.SetSameLineFlag( false );
m_FlowLayout.SetFitWidthFlag( true );
m_FlowLayout.AddInputEvenSpacedVector( m_AlphaStartInput, m_AlphaEndInput, m_AlphaNptsInput, "Alpha", "%7.3f" );
m_FlowLayout.AddInputEvenSpacedVector( m_BetaStartInput, m_BetaEndInput, m_BetaNptsInput, "Beta", "%7.3f" );
m_FlowLayout.AddInputEvenSpacedVector( m_MachStartInput, m_MachEndInput, m_MachNptsInput, "Mach", "%7.3f" );
left_col_layout.AddY( group_border_width );
// Execute
left_col_layout.AddSubGroupLayout( m_ExecuteLayout, left_col_layout.GetW() - 2 * group_border_width, 7 * row_height );
left_col_layout.AddY( m_ExecuteLayout.GetH() );
m_ExecuteLayout.AddDividerBox( "Execute" );
m_ExecuteLayout.AddButton( m_ComputeGeometryButton, "Generate Geometry" ); //This calls VSAERO.ComputeGeometry()
m_ExecuteLayout.SetButtonWidth( m_ExecuteLayout.GetW() / 2 );
m_ExecuteLayout.SetSameLineFlag( true );
m_ExecuteLayout.SetFitWidthFlag( false );
m_ExecuteLayout.AddButton( m_SetupButton, "Create New Setup" );
m_ExecuteLayout.AddButton( m_KillSolverSetupButton, "Kill Setup" );
m_ExecuteLayout.ForceNewLine();
m_ExecuteLayout.AddButton( m_SolverButton, "Launch Solver" );
m_ExecuteLayout.AddButton( m_KillSolverButton, "Kill Solver" );
m_ExecuteLayout.ForceNewLine();
m_ExecuteLayout.AddButton( m_PlotButton, "Show Results Mgr" );
m_ExecuteLayout.AddButton( m_ViewerButton, "Launch Viewer" );
m_ExecuteLayout.ForceNewLine();
//m_ExecuteLayout.AddButton( m_ExportResultsToMatlabButton, "Export to *.m" );
m_ExecuteLayout.AddButton( m_ExportResultsToCsvButton, "Export to *.csv" );
m_ExportResultsToCsvButton.Deactivate();
// Setup File
right_col_layout.AddSubGroupLayout( m_SetupLayout, right_col_layout.GetW() - 2 * group_border_width, right_col_layout.GetH() - 2 * group_border_width );
m_SetupDividerBox = m_SetupLayout.AddDividerBox( "Setup File: *.vspaero" );
m_SetupEditor = m_SetupLayout.AddFlTextEditor( m_SetupLayout.GetRemainY() - m_SetupLayout.GetStdHeight() );
m_SetupBuffer = new Fl_Text_Buffer;
m_SetupEditor->buffer( m_SetupBuffer );
m_SetupEditor->textfont( FL_COURIER );
m_SetupLayout.SetButtonWidth( m_SetupLayout.GetW() / 2 );
m_SetupLayout.SetSameLineFlag( true );
m_SetupLayout.SetFitWidthFlag( false );
m_SetupLayout.AddButton( m_ReadSetup, "Read Setup" );
m_SetupLayout.AddButton( m_SaveSetup, "Save Setup" );
//==== Solver Tab ====//
Fl_Group* solver_tab = AddTab( "Solver Console" );
Fl_Group* solver_group = AddSubGroup( solver_tab, window_border_width );
m_SolverLayout.SetGroupAndScreen( solver_group, this );
m_SolverLayout.AddDividerBox( "VSPAERO Solver Console" );
m_SolverDisplay = m_SolverLayout.AddFlTextDisplay( m_SolverLayout.GetRemainY() - m_SolverLayout.GetStdHeight() );
m_SolverBuffer = new Fl_Text_Buffer;
m_SolverDisplay->buffer( m_SolverBuffer );
//==== Viewer Tab ====//
Fl_Group* viewer_tab = AddTab( "Viewer Console" );
Fl_Group* viewer_group = AddSubGroup( viewer_tab, window_border_width );
m_ViewerLayout.SetGroupAndScreen( viewer_group, this );
m_ViewerLayout.AddDividerBox( "VSPAERO Viewer Console" );
m_ViewerDisplay = m_ViewerLayout.AddFlTextDisplay( m_ViewerLayout.GetRemainY() - m_ViewerLayout.GetStdHeight() );
m_ViewerBuffer = new Fl_Text_Buffer;
m_ViewerDisplay->buffer( m_ViewerBuffer );
// Show the starting tab
overview_tab->show();
// Flags to control Kill thread functionality
m_SolverSetupThreadIsRunning = false;
m_SolverThreadIsRunning = false;
// String to enable detection of degen file name changes
m_ModelNameBasePrevious = string();
}
//==== Constructor ====//
HingeScreen::HingeScreen( ScreenMgr* mgr ) : GeomScreen( mgr, 300, 720, "Hinge" )
{
Fl_Group* orient_tab = AddTab( "Orient" );
Fl_Group* orient_group = AddSubGroup( orient_tab, 5 );
m_BaseOrientationLayout.SetGroupAndScreen( orient_group, this );
m_BaseOrientationLayout.AddDividerBox( "Orient Base" );
m_BaseOrientationLayout.AddButton( m_OrientRotToggle, "Rotations (Use XForm Tab)" );
m_BaseOrientationLayout.AddButton( m_OrientVecToggle, "Vectors" );
m_OrientTypeGroup.Init( this );
m_OrientTypeGroup.AddButton( m_OrientRotToggle.GetFlButton() );
m_OrientTypeGroup.AddButton( m_OrientVecToggle.GetFlButton() );
m_BaseOrientationLayout.AddYGap();
m_BaseOrientationLayout.AddDividerBox( "Vectors" );
// Indivdual SubSurface Parameters
m_PrimaryDirLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_PrimaryDirLayout.SetY( m_BaseOrientationLayout.GetY() );
m_PrimaryDirLayout.SetButtonWidth( m_PrimaryDirLayout.GetW()/4 );
m_PrimaryDirLayout.SetSameLineFlag( true );
m_PrimaryDirLayout.SetFitWidthFlag( false );
m_PrimaryDirLayout.AddLabel( "Axis", m_PrimaryDirLayout.GetButtonWidth() );
m_PrimaryDirLayout.AddButton( m_PrimaryXToggle, "X" );
m_PrimaryDirLayout.AddButton( m_PrimaryYToggle, "Y" );
m_PrimaryDirLayout.AddButton( m_PrimaryZToggle, "Z" );
m_PrimaryDirLayout.ForceNewLine();
m_PrimaryDirGroup.Init( this );
m_PrimaryDirGroup.AddButton( m_PrimaryXToggle.GetFlButton() );
m_PrimaryDirGroup.AddButton( m_PrimaryYToggle.GetFlButton() );
m_PrimaryDirGroup.AddButton( m_PrimaryZToggle.GetFlButton() );
m_SecondaryDirLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_SecondaryDirLayout.SetY( m_PrimaryDirLayout.GetY() );
m_SecondaryDirLayout.SetButtonWidth( m_SecondaryDirLayout.GetW()/4 );
m_SecondaryDirLayout.SetSameLineFlag( true );
m_SecondaryDirLayout.SetFitWidthFlag( false );
m_SecondaryDirLayout.AddLabel( "Reference", m_SecondaryDirLayout.GetButtonWidth() );
m_SecondaryDirLayout.AddButton( m_SecondaryXToggle, "X" );
m_SecondaryDirLayout.AddButton( m_SecondaryYToggle, "Y" );
m_SecondaryDirLayout.AddButton( m_SecondaryZToggle, "Z" );
m_SecondaryDirLayout.ForceNewLine();
m_SecondaryDirGroup.Init( this );
m_SecondaryDirGroup.AddButton( m_SecondaryXToggle.GetFlButton() );
m_SecondaryDirGroup.AddButton( m_SecondaryYToggle.GetFlButton() );
m_SecondaryDirGroup.AddButton( m_SecondaryZToggle.GetFlButton() );
m_VectorLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_VectorLayout.SetY( m_SecondaryDirLayout.GetY() );
m_VectorLayout.AddYGap();
m_VectorLayout.AddDividerBox( "Axis" );
m_PrimTypeChoice.AddItem( "VECTOR3D" );
m_PrimTypeChoice.AddItem( "POINT3D" );
m_PrimTypeChoice.AddItem( "SURFPT" );
m_PrimTypeChoice.AddItem( "UDIR" );
m_PrimTypeChoice.AddItem( "WDIR" );
m_PrimTypeChoice.AddItem( "NDIR" );
m_VectorLayout.AddChoice( m_PrimTypeChoice, "Type" );
m_VectorLayout.AddYGap();
m_PrimVecLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_PrimVecLayout.SetY( m_VectorLayout.GetY() );
m_PrimVecLayout.SetFitWidthFlag( false );
m_PrimVecLayout.SetSameLineFlag( true );
m_PrimVecLayout.AddLabel( "Direction Vector:", 170 );
m_PrimVecLayout.SetButtonWidth( m_PrimVecLayout.GetRemainX() / 2 );
m_PrimVecLayout.AddButton( m_PrimVecRelToggle, "Rel" );
m_PrimVecLayout.AddButton( m_PrimVecAbsToggle, "Abs" );
m_PrimVecLayout.ForceNewLine();
m_PrimVecAbsRelToggle.Init( this );
m_PrimVecAbsRelToggle.AddButton( m_PrimVecAbsToggle.GetFlButton() );
m_PrimVecAbsRelToggle.AddButton( m_PrimVecRelToggle.GetFlButton() );
m_PrimVecLayout.SetFitWidthFlag( true );
m_PrimVecLayout.SetSameLineFlag( false );
m_PrimVecLayout.AddYGap();
m_PrimVecLayout.SetButtonWidth( 50 );
m_PrimVecLayout.AddSlider( m_PrimXVecSlider, "X", 10.0, "%7.3f" );
m_PrimVecLayout.AddSlider( m_PrimYVecSlider, "Y", 10.0, "%7.3f" );
m_PrimVecLayout.AddSlider( m_PrimZVecSlider, "Z", 10.0, "%7.3f" );
m_VectorLayout.SetY( m_PrimVecLayout.GetY() );
m_VectorLayout.AddYGap();
m_PrimOffLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_PrimOffLayout.SetY( m_VectorLayout.GetY() );
m_PrimOffLayout.SetFitWidthFlag( false );
m_PrimOffLayout.SetSameLineFlag( true );
m_PrimOffLayout.AddLabel( "Offset:", 170 );
m_PrimOffLayout.SetButtonWidth( m_PrimOffLayout.GetRemainX() / 2 );
m_PrimOffLayout.AddButton( m_PrimOffRelToggle, "Rel" );
m_PrimOffLayout.AddButton( m_PrimOffAbsToggle, "Abs" );
m_PrimOffLayout.ForceNewLine();
m_PrimOffAbsRelToggle.Init( this );
m_PrimOffAbsRelToggle.AddButton( m_PrimOffAbsToggle.GetFlButton() );
m_PrimOffAbsRelToggle.AddButton( m_PrimOffRelToggle.GetFlButton() );
m_PrimOffLayout.SetFitWidthFlag( true );
m_PrimOffLayout.SetSameLineFlag( false );
m_PrimOffLayout.AddYGap();
m_PrimOffLayout.SetButtonWidth( 50 );
m_PrimOffLayout.AddSlider( m_PrimXOffSlider, "X", 10.0, "%7.3f" );
m_PrimOffLayout.AddSlider( m_PrimYOffSlider, "Y", 10.0, "%7.3f" );
m_PrimOffLayout.AddSlider( m_PrimZOffSlider, "Z", 10.0, "%7.3f" );
m_VectorLayout.SetY( m_PrimOffLayout.GetY() );
m_VectorLayout.AddYGap();
m_PrimUWLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_PrimUWLayout.SetY( m_VectorLayout.GetY() );
m_PrimUWLayout.AddSlider( m_PrimUSlider, "U", 1, "%5.4f" );
m_PrimUWLayout.AddSlider( m_PrimWSlider, "W", 1, "%5.4f" );
m_VectorLayout.SetY( m_PrimUWLayout.GetY() );
m_VectorLayout.AddYGap();
m_SecVecLayout.SetGroupAndScreen( AddSubGroup( orient_tab, 5 ), this );
m_SecVecLayout.SetY( m_VectorLayout.GetY() );
m_SecVecLayout.AddDividerBox( "Reference Vector" );
m_SecVecLayout.SetFitWidthFlag( false );
m_SecVecLayout.SetSameLineFlag( true );
m_SecVecLayout.SetButtonWidth( m_SecVecLayout.GetRemainX() / 3 );
m_SecVecLayout.AddLabel( "Reference Vec", m_SecVecLayout.GetButtonWidth() );
m_SecVecLayout.AddButton( m_SecVecAbsToggle, "Rel" );
m_SecVecLayout.AddButton( m_SecVecRelToggle, "Abs" );
m_SecVecLayout.ForceNewLine();
m_SecVecAbsRelToggle.Init( this );
m_SecVecAbsRelToggle.AddButton( m_SecVecAbsToggle.GetFlButton() );
m_SecVecAbsRelToggle.AddButton( m_SecVecRelToggle.GetFlButton() );
m_SecVecLayout.AddButton( m_SecondaryVecXToggle, "X" );
m_SecVecLayout.AddButton( m_SecondaryVecYToggle, "Y" );
m_SecVecLayout.AddButton( m_SecondaryVecZToggle, "Z" );
m_SecVecLayout.ForceNewLine();
m_SecondaryVecDirGroup.Init( this );
m_SecondaryVecDirGroup.AddButton( m_SecondaryVecXToggle.GetFlButton() );
m_SecondaryVecDirGroup.AddButton( m_SecondaryVecYToggle.GetFlButton() );
m_SecondaryVecDirGroup.AddButton( m_SecondaryVecZToggle.GetFlButton() );
Fl_Group* motion_tab = AddTab( "Motion" );
Fl_Group* motion_group = AddSubGroup( motion_tab, 5 );
m_MotionLayout.SetGroupAndScreen( motion_group, this );
int bw = 110;
int tw = 15;
int sw = 35;
m_MotionLayout.SetSameLineFlag( false );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.AddDividerBox( "DOF and Coordinates" );
m_MotionLayout.AddYGap();
m_MotionLayout.AddDividerBox( "Translate" );
m_MotionLayout.SetSameLineFlag( true );
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointTransMinToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointTransMinSetButton, "Set" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointTransMinSlider, "Min", 10, "%6.2f" );
m_MotionLayout.ForceNewLine();
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointTranslateToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointTranslateRngButton, "Rng" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointTranslateSlider, "Translate", 10, "%6.2f" );
m_MotionLayout.ForceNewLine();
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointTransMaxToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointTransMaxSetButton, "Set" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointTransMaxSlider, "Max", 10, "%6.2f" );
m_MotionLayout.ForceNewLine();
m_MotionLayout.AddYGap();
m_MotionLayout.SetSameLineFlag( false );
m_MotionLayout.AddDividerBox( "Rotate" );
m_MotionLayout.SetSameLineFlag( true );
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointRotMinToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointRotMinSetButton, "Set" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointRotMinSlider, "Min", 100, "%6.2f" );
m_MotionLayout.ForceNewLine();
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointRotateToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointRotateRngButton, "Rng" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointRotateSlider, "Rotate", 100, "%6.2f" );
m_MotionLayout.ForceNewLine();
m_MotionLayout.SetFitWidthFlag( false );
m_MotionLayout.SetButtonWidth( tw );
m_MotionLayout.AddButton( m_JointRotMaxToggle, "" );
m_MotionLayout.SetButtonWidth( sw );
m_MotionLayout.AddButton( m_JointRotMaxSetButton, "Set" );
m_MotionLayout.SetFitWidthFlag( true );
m_MotionLayout.SetButtonWidth( bw - tw - sw );
m_MotionLayout.AddSlider( m_JointRotMaxSlider, "Max", 100, "%6.2f" );
m_MotionLayout.ForceNewLine();
RemoveTab( GetTab( m_SubSurfTab_ind ) );
}
