bool CCoreAudioDevice::SetHogStatus(bool hog)
{
// According to Jeff Moore (Core Audio, Apple), Setting kAudioDevicePropertyHogMode
// is a toggle and the only way to tell if you do get hog mode is to compare
// the returned pid against getpid, if the match, you have hog mode, if not you don't.
if (!m_DeviceId)
return false;
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertyHogMode;
if (hog)
{
// Not already set
if (m_HogPid == -1)
{
CLog::Log(LOGDEBUG, "CCoreAudioDevice::SetHogStatus: "
"Setting 'hog' status on device 0x%04x", (unsigned int)m_DeviceId);
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(m_HogPid), &m_HogPid);
// even if setting hogmode was successfull our PID might not get written
// into m_HogPid (so it stays -1). Readback hogstatus for judging if we
// had success on getting hog status
m_HogPid = GetHogStatus();
if (ret || m_HogPid != getpid())
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetHogStatus: "
"Unable to set 'hog' status. Error = %s", GetError(ret).c_str());
return false;
}
CLog::Log(LOGDEBUG, "CCoreAudioDevice::SetHogStatus: "
"Successfully set 'hog' status on device 0x%04x", (unsigned int)m_DeviceId);
}
}
else
{
// Currently Set
if (m_HogPid > -1)
{
CLog::Log(LOGDEBUG, "CCoreAudioDevice::SetHogStatus: "
"Releasing 'hog' status on device 0x%04x", (unsigned int)m_DeviceId);
pid_t hogPid = -1;
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(hogPid), &hogPid);
if (ret || hogPid == getpid())
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetHogStatus: "
"Unable to release 'hog' status. Error = %s", GetError(ret).c_str());
return false;
}
// Reset internal state
m_HogPid = hogPid;
}
}
return true;
}
bool CCoreAudioDevice::SetHogStatus(bool hog)
{
// According to Jeff Moore (Core Audio, Apple), Setting kAudioDevicePropertyHogMode
// is a toggle and the only way to tell if you do get hog mode is to compare
// the returned pid against getpid, if the match, you have hog mode, if not you don't.
if (!m_DeviceId)
return false;
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertyHogMode;
if (hog)
{
// Not already set
if (m_HogPid == -1)
{
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(m_HogPid), &m_HogPid);
// even if setting hogmode was successfull our PID might not get written
// into m_HogPid (so it stays -1). Readback hogstatus for judging if we
// had success on getting hog status
// We do this only when AudioObjectSetPropertyData didn't set m_HogPid because
// it seems that in the other cases the GetHogStatus could return -1
// which would overwrite our valid m_HogPid again
// Man we should never touch this shit again ;)
if (m_HogPid == -1)
m_HogPid = GetHogStatus();
if (ret || m_HogPid != getpid())
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetHogStatus: "
"Unable to set 'hog' status. Error = %s", GetError(ret).c_str());
return false;
}
}
}
else
{
// Currently Set
if (m_HogPid > -1)
{
pid_t hogPid = -1;
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(hogPid), &hogPid);
if (ret || hogPid == getpid())
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetHogStatus: "
"Unable to release 'hog' status. Error = %s", GetError(ret).c_str());
return false;
}
// Reset internal state
m_HogPid = hogPid;
}
}
return true;
}
void AudioSession::setPreferredBufferSize(size_t bufferSize)
{
AudioValueRange bufferSizeRange = {0, 0};
UInt32 bufferSizeRangeSize = sizeof(AudioValueRange);
AudioObjectPropertyAddress bufferSizeRangeAddress = {
kAudioDevicePropertyBufferFrameSizeRange,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
OSStatus result = AudioObjectGetPropertyData(defaultDevice(), &bufferSizeRangeAddress, 0, 0, &bufferSizeRangeSize, &bufferSizeRange);
if (result)
return;
size_t minBufferSize = static_cast<size_t>(bufferSizeRange.mMinimum);
size_t maxBufferSize = static_cast<size_t>(bufferSizeRange.mMaximum);
UInt32 bufferSizeOut = std::min(maxBufferSize, std::max(minBufferSize, bufferSize));
AudioObjectPropertyAddress preferredBufferSizeAddress = {
kAudioDevicePropertyBufferFrameSize,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster };
result = AudioObjectSetPropertyData(defaultDevice(), &preferredBufferSizeAddress, 0, 0, sizeof(bufferSizeOut), (void*)&bufferSizeOut);
#if LOG_DISABLED
UNUSED_PARAM(result);
#else
if (result)
LOG(Media, "AudioSession::setPreferredBufferSize(%zu) - failed with error %d", bufferSize, static_cast<int>(result));
else
LOG(Media, "AudioSession::setPreferredBufferSize(%zu)", bufferSize);
#endif
}
bool CCoreAudioDevice::SetBufferSize(UInt32 size)
{
if (!m_DeviceId)
return false;
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertyBufferFrameSize;
UInt32 propertySize = sizeof(size);
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, propertySize, &size);
if (ret != noErr)
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetBufferSize: "
"Unable to set buffer size. Error = %s", GetError(ret).c_str());
}
if (GetBufferSize() != size)
CLog::Log(LOGERROR, "CCoreAudioDevice::SetBufferSize: Buffer size change not applied.");
else
CLog::Log(LOGDEBUG, "CCoreAudioDevice::SetBufferSize: Set buffer size to %d", (int)size);
return (ret == noErr);
}
bool CCoreAudioDevice::SetNominalSampleRate(Float64 sampleRate)
{
if (!m_DeviceId || sampleRate == 0.0f)
return false;
Float64 currentRate = GetNominalSampleRate();
if (currentRate == sampleRate)
return true; //No need to change
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertyNominalSampleRate;
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(Float64), &sampleRate);
if (ret != noErr)
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetNominalSampleRate: "
"Unable to set current device sample rate to %0.0f. Error = %s",
(float)sampleRate, GetError(ret).c_str());
return false;
}
if (m_SampleRateRestore == 0.0f)
m_SampleRateRestore = currentRate;
return true;
}
void add_audio_status_listener(audio_status_callback_t function, ptr_t data)
{
OSStatus result;
CFRunLoopRef theRunLoop;
closure_t closure;
AudioObjectPropertyAddress runLoop = {
.mSelector = kAudioHardwarePropertyRunLoop,
.mScope = kAudioObjectPropertyScopeGlobal,
.mElement = kAudioObjectPropertyElementMaster
};
AudioObjectPropertyAddress devices = {
.mSelector = kAudioHardwarePropertyDevices,
.mScope = kAudioObjectPropertyScopeGlobal,
.mElement = kAudioObjectPropertyElementMaster
};
theRunLoop = NULL; // necessary?
result = AudioObjectSetPropertyData(kAudioObjectSystemObject, &runLoop, 0, NULL, sizeof(CFRunLoopRef), &theRunLoop);
assert(result == noErr);
closure = new_closure(function, data);
result = AudioObjectAddPropertyListener(kAudioObjectSystemObject, &devices, audio_listener, closure);
assert(result == noErr);
}
void mozilla_set_coreaudio_notification_runloop_if_needed()
{
mozilla::StaticMutexAutoLock lock(gMutex);
if (gRunLoopSet) {
return;
}
/* This is needed so that AudioUnit listeners get called on this thread, and
* not the main thread. If we don't do that, they are not called, or a crash
* occur, depending on the OSX version. */
AudioObjectPropertyAddress runloop_address = {
kAudioHardwarePropertyRunLoop,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
CFRunLoopRef run_loop = nullptr;
OSStatus r;
r = AudioObjectSetPropertyData(kAudioObjectSystemObject,
&runloop_address,
0, NULL, sizeof(CFRunLoopRef), &run_loop);
if (r != noErr) {
NS_WARNING("Could not make global CoreAudio notifications use their own thread.");
}
gRunLoopSet = true;
}
bool CCoreAudioDevice::SetMixingSupport(UInt32 mix)
{
if (!m_DeviceId)
return false;
if (!GetMixingSupport())
return false;
int restore = -1;
if (m_MixerRestore == -1)
{
// This is our first change to this setting. Store the original setting for restore
restore = (GetMixingSupport() ? 1 : 0);
}
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertySupportsMixing;
UInt32 mixEnable = mix ? 1 : 0;
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(mixEnable), &mixEnable);
if (ret != noErr)
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetMixingSupport: "
"Unable to set MixingSupport to %s. Error = %s", mix ? "'On'" : "'Off'", GetError(ret).c_str());
return false;
}
if (m_MixerRestore == -1)
m_MixerRestore = restore;
return true;
}
OSStatus AudioDevice::SetBufferSize(UInt32 buffersize) {
OSStatus err = noErr;
UInt32 size = sizeof(UInt32);
AudioObjectPropertyAddress addr = { kAudioDevicePropertyBufferFrameSize, (mIsInput ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput), 0 };
err = AudioObjectSetPropertyData(mID, &addr, 0, NULL, size, &buffersize);
AudioObjectGetPropertyData(mID, &addr, 0, NULL, &size, &mBufferSizeFrames);
if(mBufferSizeFrames != buffersize) printf("buffer size mismatch!");
return err;
}
OSStatus AudioDevice::SetSampleRate(Float64 sr) {
OSStatus err = noErr;
mFormat.mSampleRate = sr;
UInt32 size = sizeof(mFormat);
AudioObjectPropertyAddress addr = { kAudioDevicePropertyStreamFormat, (mIsInput ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput), 0 };
err = AudioObjectSetPropertyData(mID, &addr, 0, NULL, size, &mFormat);
if(mFormat.mSampleRate != sr) printf("Error in AudioDevice::SetSampleRate - sample rate mismatch!");
return err;
}
OSStatus AudioOutputSetVolume(AudioDeviceID device, Float32 left, Float32 right) {
OSStatus err = AudioObjectSetPropertyData(device, &kAudioOutputVolumeProperty, 0, NULL, (UInt32)sizeof(left), &left);
if (kAudioHardwareUnknownPropertyError == err) {
UInt32 channels[2];
err = AudioOutputGetStereoChannels(device, &channels[0], &channels[1]);
if (noErr == err) err = AudioDeviceSetProperty(device, NULL, channels[0], FALSE, kAudioDevicePropertyVolumeScalar, (UInt32)sizeof(Float32), &left);
if (noErr == err) err = AudioDeviceSetProperty(device, NULL, channels[1], FALSE, kAudioDevicePropertyVolumeScalar, (UInt32)sizeof(Float32), &right);
}
return err;
}
static OSStatus SetAudioProperty(AudioObjectID id,
AudioObjectPropertySelector selector,
UInt32 inDataSize, void *inData)
{
AudioObjectPropertyAddress property_address;
property_address.mSelector = selector;
property_address.mScope = kAudioObjectPropertyScopeGlobal;
property_address.mElement = kAudioObjectPropertyElementMaster;
return AudioObjectSetPropertyData(id, &property_address, 0, NULL, inDataSize, inData);
}
static BOOL MIX_LineSetMute(DWORD lineID, BOOL mute)
{
MixerLine *line = &mixer.lines[lineID];
UInt32 val = mute;
UInt32 size = sizeof(UInt32);
AudioObjectPropertyAddress address;
OSStatus err = noErr;
address.mSelector = kAudioDevicePropertyMute;
address.mScope = IsInput(line->direction) ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput;
address.mElement = 0;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, 0, size, &val);
return (err == noErr);
}
void CCoreAudioHardware::SetAutoHogMode(bool enable)
{
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioObjectPropertyScopeGlobal;
propertyAddress.mElement = kAudioObjectPropertyElementMaster;
propertyAddress.mSelector = kAudioHardwarePropertyHogModeIsAllowed;
UInt32 val = enable ? 1 : 0;
UInt32 size = sizeof(val);
OSStatus ret = AudioObjectSetPropertyData(kAudioObjectSystemObject, &propertyAddress, 0, NULL, size, &val);
if (ret != noErr)
CLog::Log(LOGERROR, "CCoreAudioHardware::SetAutoHogMode: "
"Unable to set auto 'hog' mode. Error = %s", GetError(ret).c_str());
}
/*
* Setters
*/
static BOOL MIX_LineSetVolume(DWORD lineID, DWORD channels, Float32 left, Float32 right)
{
MixerLine *line = &mixer.lines[lineID];
UInt32 size = sizeof(Float32);
AudioObjectPropertyAddress address;
OSStatus err = noErr;
TRACE("lineID %d channels %d left %f right %f\n", lineID, channels, left, right);
address.mSelector = kAudioDevicePropertyVolumeScalar;
address.mScope = IsInput(line->direction) ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput;
if (channels == 2)
{
address.mElement = 1;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, NULL, size, &left);
if (err != noErr)
return FALSE;
address.mElement = 2;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, NULL, size, &right);
}
else
{
/*
FIXME Using master channel failed ?? return kAudioHardwareUnknownPropertyError
address.mElement = 0;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, NULL, size, &left);
*/
right = left;
address.mElement = 1;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, NULL, size, &left);
if (err != noErr)
return FALSE;
address.mElement = 2;
err = AudioObjectSetPropertyData(line->deviceID, &address, 0, NULL, size, &right);
}
return (err == noErr);
}
void AudioDevice::SetBufferSize(UInt32 size)
{
UInt32 propsize = sizeof(UInt32);
AudioObjectPropertyScope theScope = mIsInput ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput;
AudioObjectPropertyAddress theAddress = { kAudioDevicePropertyBufferFrameSize,
theScope,
0 }; // channel
verify_noerr(AudioObjectSetPropertyData(mID, &theAddress, 0, NULL, propsize, &size));
verify_noerr(AudioObjectGetPropertyData(mID, &theAddress, 0, NULL, &propsize, &mBufferSizeFrames));
}
static inline gboolean
_audio_device_set_mixing (AudioDeviceID device_id, gboolean enable_mix)
{
OSStatus status = noErr;
UInt32 propertySize = 0, can_mix = enable_mix;
Boolean writable = FALSE;
gboolean res = FALSE;
AudioObjectPropertyAddress audioDeviceSupportsMixingAddress = {
kAudioDevicePropertySupportsMixing,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
if (AudioObjectHasProperty (device_id, &audioDeviceSupportsMixingAddress)) {
/* Set mixable to false if we are allowed to */
status = AudioObjectIsPropertySettable (device_id,
&audioDeviceSupportsMixingAddress, &writable);
if (status) {
GST_DEBUG ("AudioObjectIsPropertySettable: %d", (int) status);
}
status = AudioObjectGetPropertyDataSize (device_id,
&audioDeviceSupportsMixingAddress, 0, NULL, &propertySize);
if (status) {
GST_DEBUG ("AudioObjectGetPropertyDataSize: %d", (int) status);
}
status = AudioObjectGetPropertyData (device_id,
&audioDeviceSupportsMixingAddress, 0, NULL, &propertySize, &can_mix);
if (status) {
GST_DEBUG ("AudioObjectGetPropertyData: %d", (int) status);
}
if (status == noErr && writable) {
can_mix = enable_mix;
status = AudioObjectSetPropertyData (device_id,
&audioDeviceSupportsMixingAddress, 0, NULL, propertySize, &can_mix);
res = TRUE;
}
if (status != noErr) {
GST_ERROR ("failed to set mixmode: %d", (int) status);
}
} else {
GST_DEBUG ("property not found, mixing coudln't be changed");
}
return res;
}
static OSStatus coreaudio_set_framesize(AudioDeviceID id, UInt32 *framesize)
{
UInt32 size = sizeof(*framesize);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyBufferFrameSize,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
framesize);
}
static int
coreaudio_plugin_start (void) {
// This is a largely undocumented but absolutely necessary
// requirement starting with OS-X 10.6. If not called, queries and
// updates to various audio device properties are not handled
// correctly.
// Many thanks to the rtaudio project for documenting this.
CFRunLoopRef theRunLoop = NULL;
AudioObjectPropertyAddress property = { kAudioHardwarePropertyRunLoop, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMaster };
OSStatus err = AudioObjectSetPropertyData( kAudioObjectSystemObject, &property, 0, NULL, sizeof(CFRunLoopRef), &theRunLoop);
if (err) { trace ("AudioObjectSetPropertyData-plugin_start= %s\n", GetMacOSStatusErrorString(err) ); return -1; }
au_state = 0;
return 0;
}
static OSStatus coreaudio_set_streamformat(AudioDeviceID id,
AudioStreamBasicDescription *d)
{
UInt32 size = sizeof(*d);
AudioObjectPropertyAddress addr = {
kAudioDevicePropertyStreamFormat,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
return AudioObjectSetPropertyData(id,
&addr,
0,
NULL,
size,
d);
}
void CCoreAudioHardware::ResetStream(AudioStreamID stream)
{
// Find the streams current physical format
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioObjectPropertyScopeGlobal;
propertyAddress.mElement = kAudioObjectPropertyElementMaster;
propertyAddress.mSelector = kAudioStreamPropertyPhysicalFormat;
AudioStreamBasicDescription currentFormat;
UInt32 paramSize = sizeof(currentFormat);
OSStatus ret = AudioObjectGetPropertyData(stream, &propertyAddress, 0, NULL, ¶mSize, ¤tFormat);
if (ret != noErr)
return;
// If it's currently AC-3/SPDIF then reset it to some mixable format
if (currentFormat.mFormatID == 'IAC3' ||
currentFormat.mFormatID == kAudioFormat60958AC3)
{
AudioStreamBasicDescription *formats = CCoreAudioHardware::FormatsList(stream);
bool streamReset = false;
if (!formats)
return;
for (int i = 0; !streamReset && formats[i].mFormatID != 0; i++)
{
if (formats[i].mFormatID == kAudioFormatLinearPCM)
{
ret = AudioObjectSetPropertyData(stream, &propertyAddress, 0, NULL, sizeof(formats[i]), &(formats[i]));
if (ret != noErr)
{
CLog::Log(LOGDEBUG, "CCoreAudioHardware::ResetStream: "
"Unable to retrieve the list of available devices. Error = %s", GetError(ret).c_str());
continue;
}
else
{
streamReset = true;
Sleep(10);
}
}
}
free(formats);
}
}
bool CCoreAudioDevice::SetDataSource(UInt32 &dataSourceId)
{
bool ret = false;
if (!m_DeviceId)
return false;
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kAudioDevicePropertyDataSource;
UInt32 size = sizeof(dataSourceId);
OSStatus status = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, size, &dataSourceId);
if(status == noErr)
ret = true;
return ret;
}
bool CCoreAudioDevice::SetCurrentVolume(Float32 vol)
{
if (!m_DeviceId)
return false;
AudioObjectPropertyAddress propertyAddress;
propertyAddress.mScope = kAudioDevicePropertyScopeOutput;
propertyAddress.mElement = 0;
propertyAddress.mSelector = kHALOutputParam_Volume;
OSStatus ret = AudioObjectSetPropertyData(m_DeviceId, &propertyAddress, 0, NULL, sizeof(Float32), &vol);
if (ret != noErr)
{
CLog::Log(LOGERROR, "CCoreAudioDevice::SetCurrentVolume: "
"Unable to set AudioUnit volume. Error = %s", GetError(ret).c_str());
return false;
}
return true;
}
void setCurrentSourceIndex (int index, bool input)
{
if (deviceID != 0)
{
HeapBlock <OSType> types;
const int num = getAllDataSourcesForDevice (deviceID, types);
if (isPositiveAndBelow (index, num))
{
AudioObjectPropertyAddress pa;
pa.mSelector = kAudioDevicePropertyDataSource;
pa.mScope = input ? kAudioDevicePropertyScopeInput : kAudioDevicePropertyScopeOutput;
pa.mElement = kAudioObjectPropertyElementMaster;
OSType typeId = types[index];
OK (AudioObjectSetPropertyData (deviceID, &pa, 0, 0, sizeof (typeId), &typeId));
}
}
}
static void coreaudio_set_channel_position(AudioDeviceID dev_id,
int channels,
const channel_position_t *map)
{
AudioObjectPropertyAddress aopa = {
kAudioDevicePropertyPreferredChannelLayout,
kAudioObjectPropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
AudioChannelLayout *layout = NULL;
size_t layout_size = (size_t) &layout->mChannelDescriptions[channels];
layout = (AudioChannelLayout*)malloc(layout_size);
layout->mChannelLayoutTag = kAudioChannelLayoutTag_UseChannelDescriptions ;
layout->mChannelBitmap = 0;
layout->mNumberChannelDescriptions = channels;
AudioChannelDescription *descriptions = layout->mChannelDescriptions;
for (int i = 0; i < channels; i++) {
const channel_position_t pos = map[i];
AudioChannelLabel label = kAudioChannelLabel_Mono;
for (int j = 0; j < N_ELEMENTS(coreaudio_channel_mapping); j++) {
if (pos == coreaudio_channel_mapping[j].pos) {
label = coreaudio_channel_mapping[j].label;
break;
}
}
descriptions[channels - 1 - i].mChannelLabel = label;
descriptions[i].mChannelFlags = kAudioChannelFlags_AllOff;
descriptions[i].mCoordinates[0] = 0;
descriptions[i].mCoordinates[1] = 0;
descriptions[i].mCoordinates[2] = 0;
}
OSStatus err =
AudioObjectSetPropertyData(dev_id,
&aopa,
0, NULL, layout_size, layout);
if (err != noErr)
d_print("Cannot set the channel layout successfully.\n");
free(layout);
}
static inline gboolean
_audio_stream_set_current_format (AudioStreamID stream_id,
AudioStreamBasicDescription format)
{
OSStatus status = noErr;
UInt32 propertySize = sizeof (AudioStreamBasicDescription);
AudioObjectPropertyAddress formatAddress = {
kAudioStreamPropertyPhysicalFormat,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
status = AudioObjectSetPropertyData (stream_id,
&formatAddress, 0, NULL, propertySize, &format);
if (status != noErr) {
GST_ERROR ("failed to set current format: %d", (int) status);
return FALSE;
}
return TRUE;
}
CCoreAudioAEHALOSX::CCoreAudioAEHALOSX() :
m_audioGraph (NULL ),
m_Initialized (false ),
m_Passthrough (false ),
m_allowMixing (false ),
m_encoded (false ),
m_initVolume (1.0f ),
m_NumLatencyFrames (0 ),
m_OutputBufferIndex (0 ),
m_ae (NULL )
{
m_AudioDevice = new CCoreAudioDevice();
m_OutputStream = new CCoreAudioStream();
SInt32 major, minor;
Gestalt(gestaltSystemVersionMajor, &major);
Gestalt(gestaltSystemVersionMinor, &minor);
// By default, kAudioHardwarePropertyRunLoop points at the process's main thread on SnowLeopard,
// If your process lacks such a run loop, you can set kAudioHardwarePropertyRunLoop to NULL which
// tells the HAL to run it's own thread for notifications (which was the default prior to SnowLeopard).
// So tell the HAL to use its own thread for similar behavior under all supported versions of OSX.
if (major == 10 && minor >= 6)
{
CFRunLoopRef theRunLoop = NULL;
AudioObjectPropertyAddress theAddress = {
kAudioHardwarePropertyRunLoop,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
OSStatus theError = AudioObjectSetPropertyData(kAudioObjectSystemObject,
&theAddress, 0, NULL, sizeof(CFRunLoopRef), &theRunLoop);
if (theError != noErr)
{
CLog::Log(LOGERROR, "CCoreAudioAE::constructor: kAudioHardwarePropertyRunLoop error.");
}
}
}
static inline gboolean
_audio_system_set_runloop (CFRunLoopRef runLoop)
{
OSStatus status = noErr;
gboolean res = FALSE;
AudioObjectPropertyAddress runloopAddress = {
kAudioHardwarePropertyRunLoop,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
status = AudioObjectSetPropertyData (kAudioObjectSystemObject,
&runloopAddress, 0, NULL, sizeof (CFRunLoopRef), &runLoop);
if (status == noErr) {
res = TRUE;
} else {
GST_ERROR ("failed to set runloop to %p: %d", runLoop, (int) status);
}
return res;
}
audio::orchestra::api::Core::Core() :
m_private(new audio::orchestra::api::CorePrivate()) {
#if defined(AVAILABLE_MAC_OS_X_VERSION_10_6_AND_LATER)
// This is a largely undocumented but absolutely necessary
// requirement starting with OS-X 10.6. If not called, queries and
// updates to various audio device properties are not handled
// correctly.
CFRunLoopRef theRunLoop = nullptr;
AudioObjectPropertyAddress property = {
kAudioHardwarePropertyRunLoop,
kAudioObjectPropertyScopeGlobal,
kAudioObjectPropertyElementMaster
};
OSStatus result = AudioObjectSetPropertyData(kAudioObjectSystemObject,
&property,
0,
nullptr,
sizeof(CFRunLoopRef),
&theRunLoop);
if (result != noErr) {
ATA_ERROR("error setting run loop property!");
}
#endif
}
static inline gboolean
_audio_device_set_hog (AudioDeviceID device_id, pid_t hog_pid)
{
OSStatus status = noErr;
UInt32 propertySize = sizeof (hog_pid);
gboolean res = FALSE;
AudioObjectPropertyAddress audioDeviceHogModeAddress = {
kAudioDevicePropertyHogMode,
kAudioDevicePropertyScopeOutput,
kAudioObjectPropertyElementMaster
};
status = AudioObjectSetPropertyData (device_id,
&audioDeviceHogModeAddress, 0, NULL, propertySize, &hog_pid);
if (status == noErr) {
res = TRUE;
} else {
GST_ERROR ("failed to set hog: %d", (int) status);
}
return res;
}
