Пример #1
0
int main(int argc, char** argv)
{
    int i,
        bench=0,
        decode=0,
        forceStdout=0,
        main_pause=0,
        rangeBench = 1;
    unsigned fileNameStart = 0;
    unsigned nbFiles = 0;
    unsigned cLevel = 1;
    const char* programName = argv[0];
    const char* inFileName = NULL;
    const char* outFileName = NULL;
    char* dynNameSpace = NULL;
    char extension[] = ZSTD_EXTENSION;

    displayOut = stderr;
    /* Pick out basename component. Don't rely on stdlib because of conflicting behavior. */
    for (i = (int)strlen(programName); i > 0; i--)
    {
        if (programName[i] == '/') { i++; break; }
    }
    programName += i;

    /* zstdcat preset behavior */
    if (!strcmp(programName, ZSTD_CAT)) { decode=1; forceStdout=1; displayLevel=1; outFileName=stdoutmark; }

    /* unzstd preset behavior */
    if (!strcmp(programName, ZSTD_UNZSTD))
        decode=1;

    /* command switches */
    for(i=1; i<argc; i++)
    {
        char* argument = argv[i];

        if(!argument) continue;   /* Protection if argument empty */

        /* long commands (--long-word) */
        if (!strcmp(argument, "--version")) { displayOut=stdout; DISPLAY(WELCOME_MESSAGE); return 0; }
        if (!strcmp(argument, "--help")) { displayOut=stdout; return usage_advanced(programName); }
        if (!strcmp(argument, "--verbose")) { displayLevel=4; continue; }

        /* Decode commands (note : aggregated commands are allowed) */
        if (argument[0]=='-')
        {
            /* '-' means stdin/stdout */
            if (argument[1]==0)
            {
                if (!inFileName) inFileName=stdinmark;
                else outFileName=stdoutmark;
                continue;
            }

            argument++;

            while (argument[0]!=0)
            {
                /* compression Level */
                if ((*argument>='0') && (*argument<='9'))
                {
                    cLevel = 0;
                    while ((*argument >= '0') && (*argument <= '9'))
                    {
                        cLevel *= 10;
                        cLevel += *argument - '0';
                        argument++;
                    }
                    continue;
                }

                switch(argument[0])
                {
                    /* Display help */
                case 'V': displayOut=stdout; DISPLAY(WELCOME_MESSAGE); return 0;   /* Version Only */
                case 'H':
                case 'h': displayOut=stdout; return usage_advanced(programName);

                    /* Compression (default) */
                //case 'z': forceCompress = 1; break;

                    /* Decoding */
                case 'd': decode=1; argument++; break;

                    /* Force stdout, even if stdout==console */
                case 'c': forceStdout=1; outFileName=stdoutmark; displayLevel=1; argument++; break;

                    // Test
                //case 't': decode=1; LZ4IO_setOverwrite(1); output_filename=nulmark; break;

                    /* Overwrite */
                case 'f': FIO_overwriteMode(); argument++; break;

                    /* Verbose mode */
                case 'v': displayLevel=4; argument++; break;

                    /* Quiet mode */
                case 'q': displayLevel--; argument++; break;

                    /* keep source file (default anyway, so useless; only for xz/lzma compatibility) */
                case 'k': argument++; break;

                    /* Benchmark */
                case 'b': bench=1; argument++; break;

                    /* Modify Nb Iterations (benchmark only) */
                case 'i':
                    {
                        int iters= 0;
                        argument++;
                        while ((*argument >='0') && (*argument <='9'))
                            iters *= 10, iters += *argument++ - '0';
                        BMK_SetNbIterations(iters);
                    }
                    break;

                    /* cut input into blocks (benchmark only) */
                case 'B':
                    {
                        size_t bSize = 0;
                        argument++;
                        while ((*argument >='0') && (*argument <='9'))
                            bSize *= 10, bSize += *argument++ - '0';
                        if (*argument=='K') bSize<<=10, argument++;  /* allows using KB notation */
                        if (*argument=='M') bSize<<=20, argument++;
                        if (*argument=='B') argument++;
                        BMK_SetBlockSize(bSize);
                    }
                    break;

                    /* range bench (benchmark only) */
                case 'r':
                        rangeBench = -1;
                        argument++;
                        break;

                    /* Pause at the end (hidden option) */
                case 'p': main_pause=1; argument++; break;

                    /* unknown command */
                default : return badusage(programName);
                }
            }
            continue;
        }

        /* first provided filename is input */
        if (!inFileName) { inFileName = argument; fileNameStart = i; nbFiles = argc-i; continue; }

        /* second provided filename is output */
        if (!outFileName)
        {
            outFileName = argument;
            if (!strcmp (outFileName, nullString)) outFileName = nulmark;
            continue;
        }
    }

    /* Welcome message (if verbose) */
    DISPLAYLEVEL(3, WELCOME_MESSAGE);

    /* No input filename ==> use stdin */
    if(!inFileName) { inFileName=stdinmark; }

    /* Check if input defined as console; trigger an error in this case */
    if (!strcmp(inFileName, stdinmark) && IS_CONSOLE(stdin) ) return badusage(programName);

    /* Check if benchmark is selected */
    if (bench) { BMK_benchFiles(argv+fileNameStart, nbFiles, cLevel*rangeBench); goto _end; }

    /* No output filename ==> try to select one automatically (when possible) */
    while (!outFileName)
    {
        if (!IS_CONSOLE(stdout)) { outFileName=stdoutmark; break; }   /* Default to stdout whenever possible (i.e. not a console) */
        if (!decode)   /* compression to file */
        {
            size_t l = strlen(inFileName);
            dynNameSpace = (char*)calloc(1,l+5);
            if (dynNameSpace==NULL) { DISPLAY("not enough memory\n"); exit(1); }
            strcpy(dynNameSpace, inFileName);
            strcpy(dynNameSpace+l, ZSTD_EXTENSION);
            outFileName = dynNameSpace;
            DISPLAYLEVEL(2, "Compressed filename will be : %s \n", outFileName);
            break;
        }
        /* decompression to file (automatic name will work only if input filename has correct format extension) */
        {
            size_t outl;
            size_t inl = strlen(inFileName);
            dynNameSpace = (char*)calloc(1,inl+1);
            if (dynNameSpace==NULL) { DISPLAY("not enough memory\n"); exit(1); }
            outFileName = dynNameSpace;
            strcpy(dynNameSpace, inFileName);
            outl = inl;
            if (inl>4)
                while ((outl >= inl-4) && (inFileName[outl] ==  extension[outl-inl+4])) dynNameSpace[outl--]=0;
            if (outl != inl-5) { DISPLAYLEVEL(1, "Cannot determine an output filename\n"); return badusage(programName); }
            DISPLAYLEVEL(2, "Decoding file %s \n", outFileName);
        }
    }

    /* Check if output is defined as console; trigger an error in this case */
    if (!strcmp(outFileName,stdoutmark) && IS_CONSOLE(stdout) && !forceStdout) return badusage(programName);

    /* No warning message in pure pipe mode (stdin + stdout) */
    if (!strcmp(inFileName, stdinmark) && !strcmp(outFileName,stdoutmark) && (displayLevel==2)) displayLevel=1;

    /* IO Stream/File */
    FIO_setNotificationLevel(displayLevel);
    if (decode)
        FIO_decompressFilename(outFileName, inFileName);
    else
        FIO_compressFilename(outFileName, inFileName, cLevel);

_end:
    if (main_pause) waitEnter();
    free(dynNameSpace);
    return 0;
}
Пример #2
0
int main(int argCount, const char** argv)
{
    int argNb,
        bench=0,
        decode=0,
        testmode=0,
        forceStdout=0,
        main_pause=0,
        nextEntryIsDictionary=0,
        operationResult=0,
        dictBuild=0,
        nextArgumentIsOutFileName=0,
        nextArgumentIsMaxDict=0,
        nextArgumentIsDictID=0,
        nextArgumentIsFile=0;
    int cLevel = ZSTDCLI_CLEVEL_DEFAULT;
    int cLevelLast = 1;
    unsigned recursive = 0;
    const char** filenameTable = (const char**)malloc(argCount * sizeof(const char*));   /* argCount >= 1 */
    unsigned filenameIdx = 0;
    const char* programName = argv[0];
    const char* outFileName = NULL;
    const char* dictFileName = NULL;
    char* dynNameSpace = NULL;
    unsigned maxDictSize = g_defaultMaxDictSize;
    unsigned dictID = 0;
    int dictCLevel = g_defaultDictCLevel;
    unsigned dictSelect = g_defaultSelectivityLevel;
#ifdef UTIL_HAS_CREATEFILELIST
    const char** fileNamesTable = NULL;
    char* fileNamesBuf = NULL;
    unsigned fileNamesNb;
#endif

    /* init */
    (void)recursive; (void)cLevelLast;    /* not used when ZSTD_NOBENCH set */
    (void)dictCLevel; (void)dictSelect; (void)dictID;  /* not used when ZSTD_NODICT set */
    (void)decode; (void)cLevel; /* not used when ZSTD_NOCOMPRESS set */
    if (filenameTable==NULL) { DISPLAY("zstd: %s \n", strerror(errno)); exit(1); }
    filenameTable[0] = stdinmark;
    displayOut = stderr;
    /* Pick out program name from path. Don't rely on stdlib because of conflicting behavior */
    {   size_t pos;
        for (pos = (int)strlen(programName); pos > 0; pos--) { if (programName[pos] == '/') { pos++; break; } }
        programName += pos;
    }

    /* preset behaviors */
    if (!strcmp(programName, ZSTD_UNZSTD)) decode=1;
    if (!strcmp(programName, ZSTD_CAT)) { decode=1; forceStdout=1; displayLevel=1; outFileName=stdoutmark; }

    /* command switches */
    for(argNb=1; argNb<argCount; argNb++) {
        const char* argument = argv[argNb];
        if(!argument) continue;   /* Protection if argument empty */

        if (nextArgumentIsFile==0) {

            /* long commands (--long-word) */
            if (!strcmp(argument, "--")) { nextArgumentIsFile=1; continue; }
            if (!strcmp(argument, "--decompress")) { decode=1; continue; }
            if (!strcmp(argument, "--force")) {  FIO_overwriteMode(); continue; }
            if (!strcmp(argument, "--version")) { displayOut=stdout; DISPLAY(WELCOME_MESSAGE); CLEAN_RETURN(0); }
            if (!strcmp(argument, "--help")) { displayOut=stdout; CLEAN_RETURN(usage_advanced(programName)); }
            if (!strcmp(argument, "--verbose")) { displayLevel++; continue; }
            if (!strcmp(argument, "--quiet")) { displayLevel--; continue; }
            if (!strcmp(argument, "--stdout")) { forceStdout=1; outFileName=stdoutmark; displayLevel-=(displayLevel==2); continue; }
            if (!strcmp(argument, "--ultra")) { FIO_setMaxWLog(0); continue; }
            if (!strcmp(argument, "--check")) { FIO_setChecksumFlag(2); continue; }
            if (!strcmp(argument, "--no-check")) { FIO_setChecksumFlag(0); continue; }
            if (!strcmp(argument, "--no-dictID")) { FIO_setDictIDFlag(0); continue; }
            if (!strcmp(argument, "--sparse")) { FIO_setSparseWrite(2); continue; }
            if (!strcmp(argument, "--no-sparse")) { FIO_setSparseWrite(0); continue; }
            if (!strcmp(argument, "--test")) { testmode=1; decode=1; continue; }
            if (!strcmp(argument, "--train")) { dictBuild=1; outFileName=g_defaultDictName; continue; }
            if (!strcmp(argument, "--maxdict")) { nextArgumentIsMaxDict=1; continue; }
            if (!strcmp(argument, "--dictID")) { nextArgumentIsDictID=1; continue; }
            if (!strcmp(argument, "--keep")) { FIO_setRemoveSrcFile(0); continue; }
            if (!strcmp(argument, "--rm")) { FIO_setRemoveSrcFile(1); continue; }

            /* '-' means stdin/stdout */
            if (!strcmp(argument, "-")){
                if (!filenameIdx) {
                    filenameIdx=1, filenameTable[0]=stdinmark;
                    outFileName=stdoutmark;
                    displayLevel-=(displayLevel==2);
                    continue;
            }   }

            /* Decode commands (note : aggregated commands are allowed) */
            if (argument[0]=='-') {
                argument++;

                while (argument[0]!=0) {
    #ifndef ZSTD_NOCOMPRESS
                    /* compression Level */
                    if ((*argument>='0') && (*argument<='9')) {
                        cLevel = readU32FromChar(&argument);
                        dictCLevel = cLevel;
                        if (dictCLevel > ZSTD_maxCLevel())
                            CLEAN_RETURN(badusage(programName));
                        continue;
                    }
    #endif

                    switch(argument[0])
                    {
                        /* Display help */
                    case 'V': displayOut=stdout; DISPLAY(WELCOME_MESSAGE); CLEAN_RETURN(0);   /* Version Only */
                    case 'H':
                    case 'h': displayOut=stdout; CLEAN_RETURN(usage_advanced(programName));

                         /* Decoding */
                    case 'd': decode=1; argument++; break;

                        /* Force stdout, even if stdout==console */
                    case 'c': forceStdout=1; outFileName=stdoutmark; displayLevel-=(displayLevel==2); argument++; break;

                        /* Use file content as dictionary */
                    case 'D': nextEntryIsDictionary = 1; argument++; break;

                        /* Overwrite */
                    case 'f': FIO_overwriteMode(); forceStdout=1; argument++; break;

                        /* Verbose mode */
                    case 'v': displayLevel++; argument++; break;

                        /* Quiet mode */
                    case 'q': displayLevel--; argument++; break;

                        /* keep source file (default); for gzip/xz compatibility */
                    case 'k': FIO_setRemoveSrcFile(0); argument++; break;

                        /* Checksum */
                    case 'C': argument++; FIO_setChecksumFlag(2); break;

                        /* test compressed file */
                    case 't': testmode=1; decode=1; argument++; break;

                        /* destination file name */
                    case 'o': nextArgumentIsOutFileName=1; argument++; break;

                        /* recursive */
                    case 'r': recursive=1; argument++; break;

    #ifndef ZSTD_NOBENCH
                        /* Benchmark */
                    case 'b': bench=1; argument++; break;

                        /* range bench (benchmark only) */
                    case 'e':
                            /* compression Level */
                            argument++;
                            cLevelLast = readU32FromChar(&argument);
                            break;

                        /* Modify Nb Iterations (benchmark only) */
                    case 'i':
                        argument++;
                        {   U32 const iters = readU32FromChar(&argument);
                            BMK_setNotificationLevel(displayLevel);
                            BMK_SetNbIterations(iters);
                        }
                        break;

                        /* cut input into blocks (benchmark only) */
                    case 'B':
                        argument++;
                        {   size_t bSize = readU32FromChar(&argument);
                            if (toupper(*argument)=='K') bSize<<=10, argument++;  /* allows using KB notation */
                            if (toupper(*argument)=='M') bSize<<=20, argument++;
                            if (toupper(*argument)=='B') argument++;
                            BMK_setNotificationLevel(displayLevel);
                            BMK_SetBlockSize(bSize);
                        }
                        break;
    #endif   /* ZSTD_NOBENCH */

                        /* Dictionary Selection level */
                    case 's':
                        argument++;
                        dictSelect = readU32FromChar(&argument);
                        break;

                        /* Pause at the end (-p) or set an additional param (-p#) (hidden option) */
                    case 'p': argument++;
    #ifndef ZSTD_NOBENCH
                        if ((*argument>='0') && (*argument<='9')) {
                            BMK_setAdditionalParam(readU32FromChar(&argument));
                        } else
    #endif
                            main_pause=1;
                        break;
                        /* unknown command */
                    default : CLEAN_RETURN(badusage(programName));
                    }
                }
                continue;
            }   /* if (argument[0]=='-') */

            if (nextArgumentIsMaxDict) {
                nextArgumentIsMaxDict = 0;
                maxDictSize = readU32FromChar(&argument);
                if (toupper(*argument)=='K') maxDictSize <<= 10;
                if (toupper(*argument)=='M') maxDictSize <<= 20;
                continue;
            }

            if (nextArgumentIsDictID) {
                nextArgumentIsDictID = 0;
                dictID = readU32FromChar(&argument);
                continue;
            }

        }   /* if (nextArgumentIsAFile==0) */

        if (nextEntryIsDictionary) {
            nextEntryIsDictionary = 0;
            dictFileName = argument;
            continue;
        }

        if (nextArgumentIsOutFileName) {
            nextArgumentIsOutFileName = 0;
            outFileName = argument;
            if (!strcmp(outFileName, "-")) outFileName = stdoutmark;
            continue;
        }

        /* add filename to list */
        filenameTable[filenameIdx++] = argument;
    }

    /* Welcome message (if verbose) */
    DISPLAYLEVEL(3, WELCOME_MESSAGE);

#ifdef UTIL_HAS_CREATEFILELIST
    if (recursive) {
        fileNamesTable = UTIL_createFileList(filenameTable, filenameIdx, &fileNamesBuf, &fileNamesNb);
        if (fileNamesTable) {
            unsigned i;
            for (i=0; i<fileNamesNb; i++) DISPLAYLEVEL(4, "%d %s\n", i, fileNamesTable[i]);
            free((void*)filenameTable);
            filenameTable = fileNamesTable;
            filenameIdx = fileNamesNb;
        }
    }
#endif

    /* Check if benchmark is selected */
    if (bench) {
#ifndef ZSTD_NOBENCH
        BMK_setNotificationLevel(displayLevel);
        BMK_benchFiles(filenameTable, filenameIdx, dictFileName, cLevel, cLevelLast);
#endif
        goto _end;
    }

    /* Check if dictionary builder is selected */
    if (dictBuild) {
#ifndef ZSTD_NODICT
        ZDICT_params_t dictParams;
        memset(&dictParams, 0, sizeof(dictParams));
        dictParams.compressionLevel = dictCLevel;
        dictParams.selectivityLevel = dictSelect;
        dictParams.notificationLevel = displayLevel;
        dictParams.dictID = dictID;
        DiB_trainFromFiles(outFileName, maxDictSize, filenameTable, filenameIdx, dictParams);
#endif
        goto _end;
    }

    /* No input filename ==> use stdin and stdout */
    filenameIdx += !filenameIdx;   /*< default input is stdin */
    if (!strcmp(filenameTable[0], stdinmark) && !outFileName) outFileName = stdoutmark;   /*< when input is stdin, default output is stdout */

    /* Check if input/output defined as console; trigger an error in this case */
    if (!strcmp(filenameTable[0], stdinmark) && IS_CONSOLE(stdin) ) CLEAN_RETURN(badusage(programName));
    if (outFileName && !strcmp(outFileName, stdoutmark) && IS_CONSOLE(stdout) && !(forceStdout && decode))
        CLEAN_RETURN(badusage(programName));

    /* user-selected output filename, only possible with a single file */
    if (outFileName && strcmp(outFileName,stdoutmark) && strcmp(outFileName,nulmark) && (filenameIdx>1)) {
        DISPLAY("Too many files (%u) on the command line. \n", filenameIdx);
        CLEAN_RETURN(filenameIdx);
    }

    /* No warning message in pipe mode (stdin + stdout) or multiple mode */
    if (!strcmp(filenameTable[0], stdinmark) && outFileName && !strcmp(outFileName,stdoutmark) && (displayLevel==2)) displayLevel=1;
    if ((filenameIdx>1) & (displayLevel==2)) displayLevel=1;

    /* IO Stream/File */
    FIO_setNotificationLevel(displayLevel);
#ifndef ZSTD_NOCOMPRESS
    if (!decode) {
        if (filenameIdx==1 && outFileName)
          operationResult = FIO_compressFilename(outFileName, filenameTable[0], dictFileName, cLevel);
        else
          operationResult = FIO_compressMultipleFilenames(filenameTable, filenameIdx, outFileName ? outFileName : ZSTD_EXTENSION, dictFileName, cLevel);
    } else
#endif
    {  /* decompression */
#ifndef ZSTD_NODECOMPRESS
        if (testmode) { outFileName=nulmark; FIO_setRemoveSrcFile(0); } /* test mode */
        if (filenameIdx==1 && outFileName)
            operationResult = FIO_decompressFilename(outFileName, filenameTable[0], dictFileName);
        else
            operationResult = FIO_decompressMultipleFilenames(filenameTable, filenameIdx, outFileName ? outFileName : ZSTD_EXTENSION, dictFileName);
#else
        DISPLAY("Decompression not supported\n");
#endif
    }

_end:
    if (main_pause) waitEnter();
    free(dynNameSpace);
#ifdef UTIL_HAS_CREATEFILELIST
    if (fileNamesTable)
        UTIL_freeFileList(fileNamesTable, fileNamesBuf);
    else
#endif
        free((void*)filenameTable);
    return operationResult;
}