/*
========================================================================
Routine Description:
Inform us that scan ends.
Arguments:
pAdCB - WLAN control block pointer
FlgIsAborted - 1: scan is aborted
Return Value:
NONE
Note:
========================================================================
*/
VOID CFG80211_ScanEnd(
IN VOID *pAdCB,
IN BOOLEAN FlgIsAborted)
{
#ifdef CONFIG_STA_SUPPORT
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdCB;
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("80211> Network is down!\n"));
return;
}
if (!CFG80211DRV_OpsScanRunning(pAd))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("80211> No scan is running!\n"));
return; /* no scan is running */
}
if (FlgIsAborted == TRUE)
FlgIsAborted = 1;
else
{
FlgIsAborted = 0;
#ifdef CFG80211_SCAN_SIGNAL_AVG
CFG80211_UpdateBssTableRssi(pAd);
#endif /* CFG80211_SCAN_SIGNAL_AVG */
}
CFG80211OS_ScanEnd(CFG80211CB, FlgIsAborted);
pAd->cfg80211_ctrl.FlgCfg80211Scanning = FALSE;
#endif /* CONFIG_STA_SUPPORT */
}
/*
========================================================================
Routine Description:
Inform us that scan ends.
Arguments:
pAdCB - WLAN control block pointer
FlgIsAborted - 1: scan is aborted
Return Value:
NONE
Note:
========================================================================
*/
VOID CFG80211_ScanEnd(
IN struct rtmp_adapter *pAd,
IN bool FlgIsAborted)
{
#ifdef CONFIG_STA_SUPPORT
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
DBGPRINT(RT_DEBUG_TRACE, ("80211> Network is down!\n"));
return;
}
if (!CFG80211DRV_OpsScanRunning(pAd))
{
DBGPRINT(RT_DEBUG_TRACE, ("80211> No scan is running!\n"));
return; /* no scan is running */
}
if (FlgIsAborted == true)
FlgIsAborted = 1;
else
{
FlgIsAborted = 0;
#ifdef CFG80211_SCAN_SIGNAL_AVG
CFG80211_UpdateBssTableRssi(pAd);
#endif /* CFG80211_SCAN_SIGNAL_AVG */
}
CFG80211OS_ScanEnd(CFG80211CB, FlgIsAborted);
pAd->cfg80211_ctrl.FlgCfg80211Scanning = false;
#endif /* CONFIG_STA_SUPPORT */
}
/*
========================================================================
Routine Description:
Inform us that a scan is got.
Arguments:
pAdCB - WLAN control block pointer
Return Value:
NONE
Note:
Call RT_CFG80211_SCANNING_INFORM, not CFG80211_Scaning
========================================================================
*/
VOID CFG80211_Scaning(
IN VOID *pAdCB,
IN UINT32 BssIdx,
IN UINT32 ChanId,
IN UCHAR *pFrame,
IN UINT32 FrameLen,
IN INT32 RSSI)
{
#ifdef CONFIG_STA_SUPPORT
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdCB;
VOID *pCfg80211_CB = pAd->pCfg80211_CB;
BOOLEAN FlgIsNMode;
UINT8 BW;
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("80211> Network is down!\n"));
return;
}
if (!pCfg80211_CB)
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("80211> pCfg80211_CB is invalid!\n"));
return;
}
/*
In connect function, we also need to report BSS information to cfg80211;
Not only scan function.
*/
if ((!CFG80211DRV_OpsScanRunning(pAd)) &&
(pAd->cfg80211_ctrl.FlgCfg80211Connecting == FALSE))
{
return; /* no scan is running from wpa_supplicant */
}
/* init */
/* Note: Can not use local variable to do pChan */
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
FlgIsNMode = TRUE;
else
FlgIsNMode = FALSE;
if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_20)
BW = 0;
else
BW = 1;
CFG80211OS_Scaning(pCfg80211_CB,
ChanId,
pFrame,
FrameLen,
RSSI,
FlgIsNMode,
BW);
#endif /* CONFIG_STA_SUPPORT */
}
BOOLEAN CFG80211DRV_OpsScanCheckStatus(
VOID *pAdOrg,
UINT8 IfType)
{
#ifdef CONFIG_STA_SUPPORT
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
/* CFG_TODO */
if (CFG80211DRV_OpsScanRunning(pAd))
{
CFG80211DBG(RT_DEBUG_ERROR, ("SCAN_FAIL: CFG80211 Internal SCAN Flag On\n"));
return FALSE;
}
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
{
CFG80211DBG(RT_DEBUG_ERROR, ("SCAN_FAIL: BSS_SCAN_IN_PROGRESS\n"));
return FALSE;
}
/* To avoid the scan cmd come-in during driver init */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
{
DBGPRINT(RT_DEBUG_TRACE, ("SCAN_FAIL: Scan cmd before Startup finish\n"));
return FALSE;
}
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
if (RTMP_CFG80211_VIF_P2P_CLI_ON(pAd) &&
(pAd->cfg80211_ctrl.FlgCfg80211Connecting == TRUE) &&
(IfType == RT_CMD_80211_IFTYPE_STATION))
{
DBGPRINT(RT_DEBUG_ERROR,("SCAN_FAIL: P2P_CLIENT In Connecting & Canncel Scan with Infra Side\n"));
return FALSE;
}
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
#ifdef RT_CFG80211_SUPPORT
if (pAd->cfg80211_ctrl.FlgCfg8021Disable2040Scan == TRUE &&
(IfType == RT_CMD_80211_IFTYPE_AP))
{
DBGPRINT(RT_DEBUG_ERROR,("Disable 20/40 scan!!\n"));
return FALSE;
}
#endif /* RT_CFG80211_SUPPORT */
/* do scan */
pAd->cfg80211_ctrl.FlgCfg80211Scanning = TRUE;
#endif /*CONFIG_STA_SUPPORT*/
return TRUE;
}
/*
========================================================================
Routine Description:
Inform us that a scan is got.
Arguments:
pAdCB - WLAN control block pointer
Return Value:
NONE
Note:
Call RT_CFG80211_SCANNING_INFORM, not CFG80211_Scaning
========================================================================
*/
VOID CFG80211_Scaning(
IN struct rtmp_adapter *pAd,
IN uint32_t BssIdx,
IN uint32_t ChanId,
IN u8 *pFrame,
IN uint32_t FrameLen,
IN int32_t RSSI)
{
#ifdef CONFIG_STA_SUPPORT
VOID *pCfg80211_CB = pAd->pCfg80211_CB;
bool FlgIsNMode;
UINT8 BW;
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
{
DBGPRINT(RT_DEBUG_TRACE, ("80211> Network is down!\n"));
return;
}
/*
In connect function, we also need to report BSS information to cfg80211;
Not only scan function.
*/
if ((!CFG80211DRV_OpsScanRunning(pAd)) &&
(pAd->cfg80211_ctrl.FlgCfg80211Connecting == false))
{
return; /* no scan is running from wpa_supplicant */
}
/* init */
/* Note: Can not use local variable to do pChan */
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
FlgIsNMode = true;
else
FlgIsNMode = false;
if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_20)
BW = 0;
else
BW = 1;
CFG80211OS_Scaning(pCfg80211_CB,
ChanId,
pFrame,
FrameLen,
RSSI,
FlgIsNMode,
BW);
#endif /* CONFIG_STA_SUPPORT */
}
BOOLEAN CFG80211DRV_OpsScanCheckStatus(
VOID *pAdOrg,
UINT8 IfType)
{
#ifdef CONFIG_STA_SUPPORT
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER)pAdOrg;
/* CFG_TODO */
if (CFG80211DRV_OpsScanRunning(pAd))
{
CFG80211DBG(DBG_LVL_ERROR, ("SCAN_FAIL: CFG80211 Internal SCAN Flag On\n"));
return FALSE;
}
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
{
CFG80211DBG(DBG_LVL_ERROR, ("SCAN_FAIL: BSS_SCAN_IN_PROGRESS\n"));
return FALSE;
}
/* To avoid the scan cmd come-in during driver init */
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("SCAN_FAIL: Scan cmd before Startup finish\n"));
return FALSE;
}
if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) &&
((pAd->StaCfg.wdev.AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->StaCfg.wdev.AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->StaCfg.wdev.AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->StaCfg.wdev.AuthMode == Ndis802_11AuthModeWPA2PSK)) &&
(pAd->StaCfg.wdev.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("SCAN_FAIL: Link UP, Port Not Secured! ignore this set::OID_802_11_BSSID_LIST_SCAN\n"));
return FALSE;
}
if (pAd->Mlme.CntlMachine.CurrState != CNTL_IDLE)
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR, ("SCAN_FAIL: MLME busying\n"));
return FALSE;
}
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
if (RTMP_CFG80211_VIF_P2P_CLI_ON(pAd) &&
(pAd->cfg80211_ctrl.FlgCfg80211Connecting == TRUE) &&
(IfType == RT_CMD_80211_IFTYPE_STATION))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR,("SCAN_FAIL: P2P_CLIENT In Connecting & Canncel Scan with Infra Side\n"));
return FALSE;
}
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
#ifdef RT_CFG80211_SUPPORT
if (pAd->cfg80211_ctrl.FlgCfg8021Disable2040Scan == TRUE &&
(IfType == RT_CMD_80211_IFTYPE_AP))
{
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_ERROR,("Disable 20/40 scan!!\n"));
return FALSE;
}
#endif /* RT_CFG80211_SUPPORT */
/* do scan */
pAd->cfg80211_ctrl.FlgCfg80211Scanning = TRUE;
#endif /*CONFIG_STA_SUPPORT*/
return TRUE;
}
/*
==========================================================================
Description:
Scan next channel
==========================================================================
*/
VOID ScanNextChannel(RTMP_ADAPTER *pAd, UCHAR OpMode)
{
UCHAR ScanType = SCAN_TYPE_MAX;
UINT ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
BOOLEAN ScanPending = FALSE;
RALINK_TIMER_STRUCT *sc_timer = NULL;
UINT stay_time = 0;
#ifdef CONFIG_ATE
/* Nothing to do in ATE mode. */
if (ATE_ON(pAd))
return;
#endif /* CONFIG_ATE */
#ifdef CONFIG_AP_SUPPORT
if (OpMode == OPMODE_AP)
ScanType = pAd->ScanCtrl.ScanType;
#endif /* CONFIG_AP_SUPPORT */
if (ScanType == SCAN_TYPE_MAX) {
DBGPRINT(RT_DEBUG_ERROR, ("%s():Incorrect ScanType!\n", __FUNCTION__));
return;
}
#ifdef RT_CFG80211_SUPPORT
/* Since the Channel List is from Upper layer */
if (CFG80211DRV_OpsScanRunning(pAd))
pAd->ScanCtrl.Channel = CFG80211DRV_OpsScanGetNextChannel(pAd);
#endif /* RT_CFG80211_SUPPORT */
if ((pAd->ScanCtrl.Channel == 0) || ScanPending)
{
scan_ch_restore(pAd, OpMode);
}
else
{
AsicSwitchChannel(pAd, pAd->ScanCtrl.Channel, TRUE);
AsicLockChannel(pAd, pAd->ScanCtrl.Channel);
/* Check if channel if passive scan under current regulatory domain */
if (CHAN_PropertyCheck(pAd, pAd->ScanCtrl.Channel, CHANNEL_PASSIVE_SCAN) == TRUE)
ScanType = SCAN_PASSIVE;
#if defined(DPA_T) || defined(WIFI_REGION32_HIDDEN_SSID_SUPPORT)
/* Ch 12~14 is passive scan, No matter DFS and 80211H setting is y or n */
if ((pAd->ScanCtrl.Channel >= 12) && (pAd->ScanCtrl.Channel <= 14))
ScanType = SCAN_PASSIVE;
#endif /* DPA_T */
#ifdef CONFIG_AP_SUPPORT
if (OpMode == OPMODE_AP)
sc_timer = &pAd->ScanCtrl.APScanTimer;
#endif /* CONFIG_AP_SUPPORT */
if (!sc_timer) {
DBGPRINT(RT_DEBUG_ERROR, ("%s():ScanTimer not assigned!\n", __FUNCTION__));
return;
}
/* We need to shorten active scan time in order for WZC connect issue */
/* Chnage the channel scan time for CISCO stuff based on its IAPP announcement */
if (ScanType == FAST_SCAN_ACTIVE)
stay_time = FAST_ACTIVE_SCAN_TIME;
else /* must be SCAN_PASSIVE or SCAN_ACTIVE*/
{
#ifdef CONFIG_AP_SUPPORT
if ((OpMode == OPMODE_AP) && (pAd->ApCfg.bAutoChannelAtBootup))
stay_time = AUTO_CHANNEL_SEL_TIMEOUT;
else
#endif /* CONFIG_AP_SUPPORT */
if (WMODE_CAP_2G(pAd->CommonCfg.PhyMode) &&
WMODE_CAP_5G(pAd->CommonCfg.PhyMode))
{
if (pAd->ScanCtrl.Channel > 14)
stay_time = ScanTimeIn5gChannel;
else
stay_time = MIN_CHANNEL_TIME;
}
else
stay_time = MAX_CHANNEL_TIME;
}
#ifdef RT_CFG80211_SUPPORT
//CFG_TODO: for testing.
/* Since the Channel List is from Upper layer */
if (CFG80211DRV_OpsScanRunning(pAd) &&
(pAd->cfg80211_ctrl.Cfg80211ChanListLen == 1))
stay_time = 500;
#endif /* RT_CFG80211_SUPPORT */
RTMPSetTimer(sc_timer, stay_time);
if (SCAN_MODE_ACT(ScanType))
{
if (scan_active(pAd, OpMode, ScanType) == FALSE)
return;
}
/* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse*/
#ifdef CONFIG_AP_SUPPORT
if (OpMode == OPMODE_AP)
pAd->Mlme.ApSyncMachine.CurrState = AP_SCAN_LISTEN;
#endif /* CONFIG_AP_SUPPORT */
}
}
static INT scan_active(RTMP_ADAPTER *pAd, UCHAR OpMode, UCHAR ScanType)
{
UCHAR *frm_buf = NULL;
HEADER_802_11 Hdr80211;
ULONG FrameLen = 0;
UCHAR SsidLen = 0;
if (MlmeAllocateMemory(pAd, &frm_buf) != NDIS_STATUS_SUCCESS)
{
DBGPRINT(RT_DEBUG_TRACE, ("%s():allocate memory fail\n", __FUNCTION__));
#ifdef CONFIG_AP_SUPPORT
if (OpMode == OPMODE_AP)
pAd->Mlme.ApSyncMachine.CurrState = AP_SYNC_IDLE;
#endif /* CONFIG_AP_SUPPORT */
return FALSE;
}
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
if (ScanType == SCAN_2040_BSS_COEXIST)
{
DBGPRINT(RT_DEBUG_INFO, ("SYNC - SCAN_2040_BSS_COEXIST !! Prepare to send Probe Request\n"));
}
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
/* There is no need to send broadcast probe request if active scan is in effect.*/
SsidLen = 0;
if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE)
#ifdef WSC_STA_SUPPORT
|| ((ScanType == SCAN_WSC_ACTIVE) && (OpMode == OPMODE_STA))
#endif /* WSC_STA_SUPPORT */
)
SsidLen = pAd->ScanCtrl.SsidLen;
//CFG_TODO
{
#ifdef CONFIG_AP_SUPPORT
/*IF_DEV_CONFIG_OPMODE_ON_AP(pAd) */
if (OpMode == OPMODE_AP)
{
MgtMacHeaderInitExt(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR,
pAd->ApCfg.MBSSID[0].wdev.bssid,
BROADCAST_ADDR);
}
#endif /* CONFIG_AP_SUPPORT */
MakeOutgoingFrame(frm_buf, &FrameLen,
sizeof(HEADER_802_11), &Hdr80211,
1, &SsidIe,
1, &SsidLen,
SsidLen, pAd->ScanCtrl.Ssid,
1, &SupRateIe,
1, &pAd->CommonCfg.SupRateLen,
pAd->CommonCfg.SupRateLen, pAd->CommonCfg.SupRate,
END_OF_ARGS);
if (pAd->CommonCfg.ExtRateLen)
{
ULONG Tmp;
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &ExtRateIe,
1, &pAd->CommonCfg.ExtRateLen,
pAd->CommonCfg.ExtRateLen, pAd->CommonCfg.ExtRate,
END_OF_ARGS);
FrameLen += Tmp;
}
}
#ifdef DOT11_N_SUPPORT
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
ULONG Tmp;
UCHAR HtLen;
#ifdef RT_BIG_ENDIAN
HT_CAPABILITY_IE HtCapabilityTmp;
#endif
{
HtLen = sizeof(HT_CAPABILITY_IE);
#ifdef RT_BIG_ENDIAN
NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
#ifdef UNALIGNMENT_SUPPORT
{
EXT_HT_CAP_INFO extHtCapInfo;
NdisMoveMemory((PUCHAR)(&extHtCapInfo), (PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), sizeof(EXT_HT_CAP_INFO));
*(USHORT *)(&extHtCapInfo) = cpu2le16(*(USHORT *)(&extHtCapInfo));
NdisMoveMemory((PUCHAR)(&HtCapabilityTmp.ExtHtCapInfo), (PUCHAR)(&extHtCapInfo), sizeof(EXT_HT_CAP_INFO));
}
#else
*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = cpu2le16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));
#endif /* UNALIGNMENT_SUPPORT */
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &HtCapIe,
1, &HtLen,
HtLen, &HtCapabilityTmp,
END_OF_ARGS);
#else
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &HtCapIe,
1, &HtLen,
HtLen, &pAd->CommonCfg.HtCapability,
END_OF_ARGS);
#endif /* RT_BIG_ENDIAN */
}
FrameLen += Tmp;
#ifdef DOT11N_DRAFT3
if ((pAd->ScanCtrl.Channel <= 14) && (pAd->CommonCfg.bBssCoexEnable == TRUE))
{
ULONG Tmp;
HtLen = 1;
MakeOutgoingFrame(frm_buf + FrameLen, &Tmp,
1, &ExtHtCapIe,
1, &HtLen,
1, &pAd->CommonCfg.BSSCoexist2040.word,
END_OF_ARGS);
FrameLen += Tmp;
}
#endif /* DOT11N_DRAFT3 */
}
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (WMODE_CAP_AC(pAd->CommonCfg.PhyMode) &&
(pAd->ScanCtrl.Channel > 14)) {
FrameLen += build_vht_ies(pAd, (UCHAR *)(frm_buf + FrameLen), SUBTYPE_PROBE_REQ);
}
#endif /* DOT11_VHT_AC */
#ifdef WSC_STA_SUPPORT
if (OpMode == OPMODE_STA)
{
BOOLEAN bHasWscIe = FALSE;
/*
Append WSC information in probe request if WSC state is running
*/
if ((pAd->StaCfg.WscControl.WscEnProbeReqIE) &&
(pAd->StaCfg.WscControl.WscConfMode != WSC_DISABLE) &&
(pAd->StaCfg.WscControl.bWscTrigger == TRUE))
bHasWscIe = TRUE;
#ifdef WSC_V2_SUPPORT
else if ((pAd->StaCfg.WscControl.WscEnProbeReqIE) &&
(pAd->StaCfg.WscControl.WscV2Info.bEnableWpsV2))
bHasWscIe = TRUE;
#endif /* WSC_V2_SUPPORT */
if (bHasWscIe)
{
UCHAR *pWscBuf = NULL, WscIeLen = 0;
ULONG WscTmpLen = 0;
os_alloc_mem(NULL, (UCHAR **)&pWscBuf, 512);
if (pWscBuf != NULL)
{
NdisZeroMemory(pWscBuf, 512);
WscBuildProbeReqIE(pAd, STA_MODE, pWscBuf, &WscIeLen);
MakeOutgoingFrame(frm_buf + FrameLen, &WscTmpLen,
WscIeLen, pWscBuf,
END_OF_ARGS);
FrameLen += WscTmpLen;
os_free_mem(NULL, pWscBuf);
}
else
DBGPRINT(RT_DEBUG_WARN, ("%s:: WscBuf Allocate failed!\n", __FUNCTION__));
}
}
#endif /* WSC_STA_SUPPORT */
#ifdef RT_CFG80211_SUPPORT
if ((OpMode == OPMODE_STA) &&
(pAd->StaCfg.wpa_supplicant_info.WpaSupplicantUP != WPA_SUPPLICANT_DISABLE) &&
CFG80211DRV_OpsScanRunning(pAd))
{
ULONG ExtraIeTmpLen = 0;
MakeOutgoingFrame(frm_buf + FrameLen, &ExtraIeTmpLen,
pAd->cfg80211_ctrl.ExtraIeLen, pAd->cfg80211_ctrl.pExtraIe,
END_OF_ARGS);
FrameLen += ExtraIeTmpLen;
}
#endif /* RT_CFG80211_SUPPORT */
MiniportMMRequest(pAd, 0, frm_buf, FrameLen);
MlmeFreeMemory(pAd, frm_buf);
return TRUE;
}
