static exposure get_exposure(int bv, int simul) {
exposure expo;
//same tv
int same_tv_offset = 0;
if(same_tv) {
if(simul && lens_av != LENS_AV_THIS) same_tv_offset = MAX(0, lens_av - av_min);
else same_tv_offset = MAX(0, RAW2AV(lens_info.raw_aperture_min) - av_min);
}
//av
expo.av = MAX(av_max + (MIN(bv - av_off, 0) * av_step) / 10, av_min);
if(simul && lens_av != LENS_AV_THIS) expo.av = MAX(lens_av, expo.av);
else expo.av = COERCE(expo.av, RAW2AV(lens_info.raw_aperture_min), RAW2AV(lens_info.raw_aperture_max));
//av
expo.sv = MIN(iso_min - (MIN(bv - (iso_off + same_tv_offset), 0) * iso_step) / 10, iso_max);
if(round_iso) { expo.sv /= 10; expo.sv *= 10; }
//ec
expo.ec = COERCE(ec - (MIN(bv - (ec_off + same_tv_offset), 0) * ec_step) / 10, ec_min, ec_max);
//tv
expo.tv = COERCE((bv - expo.av + expo.sv) - expo.ec, tv_min, 130);
//ec
expo.ec = bv - (expo.tv + expo.av - expo.sv);
return expo;
}
void restore_kelvin_wb()
{
msleep(500); // to make sure mode switch is complete
// sometimes Kelvin WB and WBShift are not remembered, usually in Movie mode
lens_set_kelvin_value_only(workaround_wb_kelvin);
lens_set_wbs_gm(COERCE(((int)workaround_wbs_gm) - 100, -9, 9));
lens_set_wbs_ba(COERCE(((int)workaround_wbs_ba) - 100, -9, 9));
//~ NotifyBox(1000, "Restored WB: %dK GM%d BA%d", workaround_wb_kelvin, workaround_wbs_gm, workaround_wbs_ba); msleep(1000);
}
void lv_rec_update_preset(lv_rec_save_data_t *data)
{
lv_rec_update_resolution(data);
int presets[] = { 0, 1080, 960, 720, 480 };
unsigned int preset_yres = presets[COERCE(lv_rec_line_skip_preset, 0, sizeof(presets)/sizeof(presets[0]))];
/* calculate the height after internal cropping */
data->internallyCroppedHeight = data->height - data->topCrop - data->bottomCrop;
if(preset_yres != 0)
{
if(data->internallyCroppedHeight >= preset_yres)
{
data->options.linesToSkip = (data->internallyCroppedHeight - preset_yres) / 2;
}
else
{
data->options.linesToSkip = 0;
}
/* in raw mode we just can skip two lines */
if(data->options.rawMode && (data->options.linesToSkip % 2))
{
data->options.linesToSkip--;
}
/* set global option too */
lv_rec_line_skip = data->options.linesToSkip;
}
data->finalHeight = data->internallyCroppedHeight - data->options.linesToSkip * 2;
}
static MENU_SELECT_FUNC(ec_sel) {
int set = ec;
ec = COERCE(ec + delta * 5, -50, 50);
if(same_tv && ec - set != 0) {
set_rear();
aperture_range_set(NULL, delta * -1);
iso_curve_set(NULL, delta * -1);
ec_curve_set(NULL, delta * -1);
}
}
static void post_deflicker_save_sidecar_file(int type, char* photo_filename, float ev)
{
/* find and strip extension */
char* ext = photo_filename + strlen(photo_filename) - 1;
while (ext > photo_filename && *ext != '/' && *ext != '.') ext--;
if (*ext != '.') return;
*ext = 0;
/* find and strip base filename (e.g. IMG_1234) */
char* p = ext;
while (p > photo_filename && *p != '/') p--;
if (*p != '/') return;
*p = 0;
/* path components */
char* dir = photo_filename; /* A:/DCIM/100CANON */
char* basename = p+1; /* IMG_1234 */
char* extension = ext+1; /* CR2 */
//~ NotifyBox(2000, "'%s'\n'%s'\n'%s'", dir, basename, extension);
char sidecar[100];
snprintf(sidecar, sizeof(sidecar), "%s/%s.%s", dir, basename, type ? "UFR" : "XMP");
FILE* f = FIO_CreateFile(sidecar);
if (!f) return;
if (type == 0)
{
/* not sure */
int evi = ev * 100000;
my_fprintf(f, xmp_template, FMT_FIXEDPOINT5S(evi));
}
else if (type == 1)
{
char raw[100];
char jpg[100];
snprintf(raw, sizeof(raw), "%s.%s", basename, extension);
snprintf(jpg, sizeof(jpg), "%s.JPG", basename);
ev = COERCE(ev, -6, 6);
int evi = ev * 100000;
my_fprintf(f, ufraw_template, raw, jpg, FMT_FIXEDPOINT5(evi));
}
FIO_CloseFile(f);
}
static MENU_SELECT_FUNC(last_bv_set) {
if(last_bv == INT_MIN) last_bv = 20;
else last_bv = COERCE(last_bv + delta * -5, BV_MIN, BV_MAX);
}
static MENU_SELECT_FUNC(tv_min_set) {
tv_min = COERCE(tv_min + delta * 5, -50, 130);
}
static MENU_SELECT_FUNC(lens_av_set) {
lens_av += delta * 5;
if(lens_av < 0) lens_av = LENS_AV_THIS;
lens_av = COERCE(lens_av, 0, 80);
}
void green_screen_step()
{
/****************************************************
* .. if Canon menu is ACTIVE - return immediately *
****************************************************/
if (!lv)
{
last_green_screen_state = 0;
return;
}
/********************************
* Masses of auto variables. *
********************************/
// unsigned int Xs,Xe; // X_POSITION of Cropmark_start/_end
//~ Xs = g_cropmark_x_start; // First Pix drawn on (and a multiple of 4)
//~ Xe = g_cropmark_x_end; // First Pix not drawn on (multiple of 4)
// unsigned int Vram_pixels = Xe - Xs;
unsigned int vpix, lum1, lum2;
// results from previous loop, used for display
static int total_luma = 0;
static int highest_luma = 0;
static int lowest_luma = 256;
static int total_pixels = 0;
// results for current loop, being updated (will be used at next loop)
unsigned int total_luma_tmp = 0;
unsigned int highest_luma_tmp = 0;
unsigned int lowest_luma_tmp = 256;
unsigned int total_pixels_tmp = 0;
/****************************************************************
* Set address pointers up to first line in Vram *
****************************************************************/
uint32_t* lv = (uint32_t *) get_yuv422_vram()->vram;
if (!lv) return;
uint8_t* bm = bmp_vram();
// uint16_t* bm16 = (uint16_t *) bmp_vram();
uint8_t* bm_mirror = (uint8_t *) get_bvram_mirror();
unsigned int average_luma = total_luma / total_pixels;
unsigned int high_delta = highest_luma - average_luma; // used to work out colour scale
unsigned int low_delta = average_luma - lowest_luma; // colour scale for darker pixels
/******************************************************************
* Go through Crop area. Note highest and lowest luma, average *
******************************************************************/
int high_delta_factor = 1024 / high_delta; // replace division with multiplication
int low_delta_factor = 1024 / low_delta;
for(int y = os.y0 + os.off_169; y < os.y_max - os.off_169; y += 2 )
{
uint32_t * const v_row = (uint32_t*)( lv + BM2LV_R(y) ); // 2 pixels
uint16_t * const b_row = (uint16_t*)( bm + BM_R(y) ); // 2 pixels
uint16_t * const m_row = (uint16_t*)( bm_mirror + BM_R(y) ); // 2 pixels
uint8_t* lvp; // that's a moving pointer through lv vram
uint16_t* bp; // through bmp vram
uint16_t* mp; // through mirror
for (int x = os.x0; x < os.x_max; x += 2)
{
lvp = (uint8_t *) (v_row + BM2LV_X(x)/2); lvp++;
bp = b_row + x/2;
mp = m_row + x/2;
/********************************************
* Get 4 bytes of vram (ie two vram Pixels) *
********************************************/
// vpix = [LSB=pix on left] u y1 v y2 [MSB=pix on right]
vpix = lv[BM2LV(x,y)/4];
total_pixels_tmp += 2;
lum1 = ( vpix & 0x0000FF00 ) >> 8; // y1
lum2 = ( vpix & 0xFF000000 ) >> 24; // y2
/*************************
* Update total luma *
*************************/
total_luma_tmp += lum1 + lum2;
/*************************
* new Maximum ? *
*************************/
if (lum1 > highest_luma_tmp)
highest_luma_tmp = lum1;
if (lum2 > highest_luma_tmp)
highest_luma_tmp = lum2;
/*************************
* new Miniumum ? *
*************************/
if (lum1 < lowest_luma_tmp)
lowest_luma_tmp = lum1;
if (lum2 < lowest_luma_tmp)
lowest_luma_tmp = lum2;
/*********************************************************
* Initialise writeback colour of overlay to 0 for LUM1 *
*********************************************************/
unsigned int lum = (lum1 + lum2) / 2;
unsigned int col = 0;
/**************************************
* LUM1 Higher than average luma *
**************************************/
if (lum > average_luma)
{
col = ((lum-average_luma)*12) * high_delta_factor / 1024;
if (col > 12)
col=12;
col = 128 + (col+2) * 8;
}
else if (lum < average_luma)
{
/**************************************
* LUM1 Lower than average luma *
**************************************/
col = ((average_luma-lum)*12) * low_delta_factor / 1024;
if (col > 12)
col=12;
col = 128 - (col+2) * 8;
}
if (col) col = ((col * 41) >> 8) + 38;
unsigned int c = col | (col << 8);
#define BP (*bp)
#define MP (*mp)
#define BN (*(bp + BMPPITCH/2))
#define MN (*(mp + BMPPITCH/2))
if (BP != 0 && BP != MP) { continue; }
if (BN != 0 && BN != MN) { continue; }
if ((MP & 0x80808080) || (MN & 0x80808080)) continue;
MP = BP = c;
MN = BN = c;
#undef BP
#undef MP
#undef BN
#undef MN
}
} // end of (y loop)
/**********************************
* commit statistics for next loop *
**********************************/
total_luma = total_luma_tmp;
highest_luma = highest_luma_tmp;
lowest_luma = lowest_luma_tmp;
total_pixels = total_pixels_tmp;
/**********************************
* Display average, min and max *
**********************************/
bmp_printf( FONT(FONT_MED, COLOR_WHITE, COLOR_BLACK),
os.x0 + os.x_ex/2 - font_med.width*7, os.y_max - os.off_169 - 47,
"Average = %03d",average_luma);
bmp_printf( FONT(FONT_MED,COLOR_CYAN, COLOR_BLACK),
os.x0, os.y_max - os.off_169 - 47,
"MIN = %03d",lowest_luma);
bmp_printf( FONT(FONT_MED,COLOR_YELLOW, COLOR_BLACK),
os.x_max - font_med.width*9,
os.y_max - os.off_169 - 47,
"%03d = MAX",highest_luma);
bmp_printf( FONT(FONT_MED,COLOR_WHITE, COLOR_BLACK),
os.x0 + os.x_ex/2 - font_med.width*7, os.y_max - os.off_169 - 27,
"Accuracy=%03d%%",((255-(highest_luma-lowest_luma))*99 )/255
);
bmp_printf( FONT(FONT_MED,COLOR_CYAN, COLOR_BLACK),
os.x0, os.y_max - os.off_169 - 27,
"delta %03d", COERCE(average_luma - lowest_luma, 0, 255));
bmp_printf( FONT(FONT_MED, COLOR_YELLOW, COLOR_BLACK),
os.x_max - font_med.width*9,
os.y_max - os.off_169 - 27,
"%03d delta", COERCE(highest_luma - average_luma, 0, 255));
msleep(10); // don't kill the battery :)
} /* end of green_screen_step() */
void set_alo(int value)
{
value = COERCE(value, 0, 3);
prop_request_change(PROP_ALO, &value, 4);
}
void LensFocusSetup(int stepsize, int stepdelay, int wait)
{
lens_focus_stepsize = COERCE(stepsize, 1, 3);
lens_focus_waitflag = wait;
lens_focus_delay = stepdelay/10;
}
static float raw_to_ev_custom(int raw, int white_level)
{
int raw_max = white_level - raw_info.black_level;
float raw_ev = -log2f(raw_max) + log2f(COERCE(raw - raw_info.black_level, 1, raw_max));
return raw_ev;
}